Enter a balanced equation for the reaction between aqueous lead (II) nitrite and aqueous lithium chloride to form solid lead (II) chloride and aqueous lithium nitrite.

Answer:

a) ²²⁴Ra₈₈ ---> α + ²²⁰Rn₈₆ + Q

b) the Q-value of this reaction is 5.789 MeV

c) the energies (in MeV) of the two associated alpha particles are; 5.69 MeV and 5.449 Mev

Explanation:

a)

The decay equation for the alpha decay is expressed as;

²²⁴Ra₈₈ ---> α + ²²⁰Rn₈₆ + Q

b)

Calculate the Q-value (in MeV) of this reaction.

Q = Mparent - Mdaughter -Mg

Q = MRa - MRn -Mg

= 224.020202 - 220.011384 - 4.00260305

= 0.00621495 amu

= 5.789 MeV

therefore the Q-value of this reaction is 5.789 MeV

c)

Energy of alpha particle is expressed as;

E∝ = MQ / ( m + M)

now this is the maximum energy available for the daughter, ²²⁰Rn going to the ground state;

The energy of the alpha particle gives;

E∝  = 220(5.789) / ( 4 + 220) = 5.69 MeV

as given in the question,The other less frequent alpha occurring 5.5% of the time leaves the daughter nucleus in an excited state of 0.241 MeV above the ground state.

Therefore the energy of this alpha is

E∝ = 5.69 - 0.241 = 5.449 Mev

Therefore the energies (in MeV) of the two associated alpha particles are; 5.69 MeV and 5.449 Mev

d)

Sketch of the nuclear decay scheme have been uploaded along side this answer.

(a)[tex]^{224}Ra_{_{88}}=^4\alpha_{_2}+^{220}Rn_{_{86}}+Q[/tex]

(b) the Q-value of the reaction is 5.789 MeV

(c) The alpha particles have energies of 5.69 MeV and 5.449 MeV

(a) The alpha decay of the radioisotope 224Ra is given by:

         [tex]^{224}Ra_{_{88}}=^4\alpha_{_2}+^{220}Rn_{_{86}}+Q[/tex]

(b) The Q-value  of a reaction is given by:

Q = {mas of reactants - mass of products}c²

[tex]Q = [M_{224Ra} - M_{\alpha} - M_{220Rn}]c^2[/tex]

Q = (224.020202 - 220.011384 - 4.00260305) amu.c²

Q = 0.00621495 × 931.5 MeV   ( since 1 amu.c² = 931.5 MeV)

Q = 5.789 MeV

(c) The energy of the alpha particle is expressed as;

E(α) = MQ / ( m + M)

it is the maximum energy available for the daughter nucleus, ²²⁰Rn going to the ground state.

If the daughter nucleus is at rest then all the energy is carried by the alpha particle.

The energy of the alpha particle is:

E(α)  = 220(5.789) / ( 4 + 220) = 5.69 MeV

Now, for the alpha particle occurring 5.5% of the time and leaving the daughter nucleus in an excited state of 0.241 MeV :

The energy of this alpha particle is

E(α) = 5.69 - 0.241 = 5.449 Mev

Learn more about alpha decay:

https://brainly.com/question/2600896?referrer=searchResults

Answer:

b=200

l=100

Explanation:

so since it is a square all sides would be equal

when you cut the square vertically the dimensions will change

the bredth would be same that is 200

but the length would be half that is 100

Answer:

B. Tell the instructor

Explanation:

Always to the instructor about any accidents happens in a lab.

Answer:

B

Explanation:

Just helping out:)

Answer:

Malleability

Explanation:

Answer:

Malleability is not chemical property

Answer:

There can be error in millimetres.

Explanation:

The rounding off can create errors in exact measurement. There can be errors in the measured value and actual measurement of the object. Alexander has rounded his calculation to nearest centimetre then it is possible he can make errors in millimetre calculations. The measured width of the object will not be the actual measurement and it might differ slightly.

Answer:

1. electrons and neutrons protons

2. true

3. electrons are negative and neutrons are neutral

4. true

5. the total number of neutrons and protons

Explanation:

Answer:

See explanation

Explanation:

a) A large value of K shows that the reaction is product favoured. It implies that more reactants are converted to products and the equilibrium concentration of products in the system is far higher than that of the reactants. The reaction will proceed towards the right hand side.

b)A small value of K implies that the reaction is reactant favoured. There are more reactants than products present at equilibrium and the reaction will proceed towards the lefthand side.

c) K=1 implies the presence of a significant concentration of reactants and products in the system at equilibrium.

Answer:none of the above

Explanation:

The complementary base sequence to GTAGCT is C-A-T-G. Therefore, option E is correct.

If the base sequence of the other strand is known, complementary base pairs allow the sequence of one strand to be predicted. In DNA, complementary base pairing is crucial because it enables the base pairs to be put in the most energetically advantageous configuration.

Reverse transcriptase, a DNA polymerase that can use either DNA or RNA as a template, creates complementary DNA (cDNA), a DNA copy of a messenger RNA (mRNA) molecule.

The nitrogenous bases' adenine, thymine, cytosine, and guanine are referred to as complementary base pairs. Adenine will always pair with its complementary base, thymine, and cytosine will always couple with its complementary base, guanine, in a double strand of DNA.

Thus, option E is correct.

To learn more about the complementary base sequence, follow the link;

https://brainly.com/question/837295

#SPJ5

Answer:

Title: Effect of soda color on the choice of Allison's friends.

Independent variable: Color of Soda

Dependent variable: Friends' choice/Number of friends that chose a particular soda

Please find the data table attached as an image.

Explanation:

A data table is used to organize the data recorded after an experiment. The data table shows the title of the experiment, which is written directly above the table. It also shows the independent variable (on the first column) and the dependent variable (on other columns to the right).

- In this experiment, the title of the data table can be written as EFFECT OF COLOR OF SODA ON THE CHOICE OF ALLISON'S FRIENDS.

- The independent variable is the manipulated or changed variable, which is the COLOR OF SODA in this case.

- The dependent variable is the variable that is measured in an experiment, which is the NUMBER OF FRIENDS THAT CHOSE EACH SODA in this case.

Answer:

B. Chlorine has more than one stable isotope that occurs naturally.

D. As fluorine only has one isotope the atomic mass is identical to the mass of the isotope.

Explanation:

The reason for the difference seen between the atomic mass provided in the periodic table and the atomic mass of each element is that most naturally occurring elements have more than one isotope (isotopes are atoms that have the same atomic number but different mass numbers). This means that when we measure the atomic mass of an element, we must generally settle for the average mass of the naturally occurring mixture of isotopes.

¹⁹F is the only stable isotope of fluorine, and its abundance is 100%. Therefore, its atomic mass is identical to that of the isotope.

On the other hand, chlorine has two stable isotopes ³⁵Cl (75.77%) and ³⁷Cl (24.23%). The atomic mass of  ³⁵Cl has been determined to be 34.96885 amu, and the atomic mass of ³⁷Cl has been determined to be 36.96590 amu. Thus, the average atomic mass  of chlorine can be calculated as follows:

average atomic mass  of natural chlorine = (0.7577)×(34.96885 amu) + (0.2423)×(36.96590 amu)  = 35.45 amu

Note that in calculations involving percentages, we need to convert percentages to  fractions.

Answer:

dispersion forces

Explanation:

SO3 is a trigonal planar molecule. All the dipoles of the S-O bonds cancel out making the molecule to be a nonpolar molecule.

The primary intermolecular force in nonpolar molecules is the London dispersion forces. As expected, the London dispersion forces is the intermolecular force present in SO3.

Hence SO3 is a symmetrical molecule having only weak dispersion forces acting between its molecules.

The intermolecular bond in the sulfur trioxide has been the dispersive force. Thus, option C is correct.

The sulfur trioxide has been the nonpolar molecule with the presence of S-O and S=O bonds.

The nonpolar bonds have consisted of weak intermolecular interactions resulting from the London Dispersive force. This type of interaction has been able to bind the nonpolar molecules together.

Thus, the intermolecular bond in the sulfur trioxide has been the dispersive force. Thus, option C is correct.

For more information about the intermolecular forces. refer to the link:

https://brainly.com/question/17111432

Answer:

The correct answer is - b. transmission electron microscope.

Explanation:

A transmission electron magnifying instrument fires a light emission through an sample to create an amplified and magnified picture of a specimen.

The transmission electron magnifying instrument is utilized to see thin slices of specimen or specimen smaller than 100 nm through which electrons can pass and form a image of specimen. The TEM is comparable to from various perspectives to the ordinary light magnifying instrument.

Thus, the correct answer is - b. transmission electron microscope.

Answer:

[tex]\rho =0.9g/mL[/tex]

Explanation:

Hello,

In this case, due to the volume displacement caused the by the object's submersion, it's volume is:

[tex]V=11.8mL-4.5mL=7.3 mL[/tex]

In such a way, considering the mathematical definition of density, it turns out:

[tex]\rho =\frac{m}{V}=\frac{6.5g}{7.3mL}\\ \\\rho =0.89g/mL[/tex]

Rounding to the nearest tenth we finally obtain:

[tex]\rho =0.9g/mL[/tex]

Regards.

Answer: The mass number is the sum of the numbers of protons and neutrons present in the nucleus of an atom.

I hope that this helps you !

Answer:

2.28 g of CsF.

Explanation:

The following data were obtained from the question:

Molar mass of CsF = 151.9 g/mol.

Volume = 300 mL

Molarity of CsF = 0.05 M

Mass of CsF =.?

Next, we shall convert 300 mL to litre (L). This can be obtained as follow:

1000 mL = 1 L

Therefore,

300 mL = 300 mL /1000 mL × 1 L

300 mL = 0.3 L

Therefore, 300 mL is equivalent to 0.3 L

Next, we shall determine the number of mole CsF in the solution. This can be obtained as follow:

Volume = 0.3 L

Molarity of CsF = 0.05 M

Mole of CsF =.?

Molarity = mole /Volume

0.05 = mole of CsF /0.3

Cross multiply

Mole of CsF = 0.05 × 0.3

Mole of CsF = 0.015 mole.

Finally, we shall determine the mass of CsF needed to prepare the solution as follow:

Mole of CsF = 0.015 mole.

Molar mass of CsF = 151.9 g/mol.

Mass of CsF =.?

Mole = mass /Molar mass

0.015 = mass of CsF /151.9

Cross multiply

Mass of CsF = 0.015 × 151.9

Mass of CsF = 2.28 g

Therefore, 2.28 g of CsF is needed to prepare the solution.

Answer:

The numeric value is 1.

Explanation:

We have given that the “a” equal to “b” which means we can replace the “a” with “b” or we can replace the “b” with “a”.  

The given condition or quantity = a/b.

Now it is required to find the numeric value of a/b.  

To find the numeric value we first replace the “b” with “a” and then divide the values. Since we know that if the numeration and denominators are the same then after dividing the value, the resulting value will be 1.

The numerical value = a/b = a/a = 1

Answer:

hydrogen dioxide

Explanation:

Hydrogen dioxide  is the name of the binary molecule H2O2 ,therefore option (b) is correct from the image below.

A thick, colorless liquid, H2O2, resembling water, but having a bitter, sour taste, produced by the action of acids on barium peroxide.

It decomposes into water and oxygen, and is manufactured in large quantities for an oxidizing and bleaching agent. Called also oxygenated water.

A colorless, unstable compound of hydrogen and oxygen (H 2 O 2). It is used as an antiseptic and bleaching agent.

Hydrogen dioxide  is the name of the binary molecule H2O2 ,hence option (b) is correct from the image below.

Learn more about hydrogen dioxide, here:

https://brainly.com/question/10140462

#SPJ2

it should be option A. H

[ because H gained oxygen ( O ) ]

Oxidation is defined by :

- the loss of electrons

- the loss of hydrogen ( H )

- the gain of oxygen ( O )

- increase in oxidation state

Reduction is defined by :

- the gain of electrons

- the gain of hydrogen ( H )

- the loss of oxygen ( O )

- decrease in oxidation state

(Basically, oxidation n reduction is opposite of each other)

The species being oxidized in the following reaction is Carbon Dioxide (CO2). This can be determined by looking at the oxidation states of the reactants and products.

In the reactants, Carbon Dioxide (CO2) has an oxidation state of +4, while Hydrogen (H2) has an oxidation state of 0. In the products, Carbon (CO) has an oxidation state of +2, and Water (H2O) has an oxidation state of -2.

The net change in oxidation states between the reactants and products is a decrease of 6, which means that the species that was being oxidized is Carbon Dioxide (CO2). The oxidation state of a species can be determined by looking at the number of electrons it has gained or lost in a reaction.

In this reaction, Carbon Dioxide (CO2) has lost 6 electrons, which is a sign that it is the species being oxidized. This is further evidenced by the fact that Carbon (CO) and Water (H2O) have gained electrons, meaning that they are the species being reduced. Therefore, the species being oxidized in the following reaction is Carbon Dioxide (CO2).

Learn more about   Carbon Dioxide  at:

https://brainly.com/question/3049557

#SPJ3

Answer:

- Take 3.3 mL of 3.0-M hydrochloric acid and subsequently add 76.7 mL of water to complete the 100.00 mL.

- Take 11.7mL of 6.0-M hydrochloric acid and subsequently add 88.3 mL of water to complete the 100.00 mL

Explanation:

Hello,

In this case, given that the dilutions are preparedfrom 3.0-M and 6.0-M hydrochloric acid, we must proceed as follows:

- 3.0-M stock: when using this stock, the aliquot you must take is computed as shown below:

[tex]V_1=\frac{M_2V_2}{M_1}=\frac{100.00mL*0.70M}{3.0M}=23.3mL[/tex]

It means that you must take 23.3 mL of 3.0-M hydrochloric acid and subsequently add 76.7 mL of water to complete the 100.00 mL.

- 6.0-M stock: when using this stock, the aliquot you must take is computed as shown below:

[tex]V_1=\frac{M_2V_2}{M_1}=\frac{100.00mL*0.70M}{6.0M}=11.7mL[/tex]

It means that you must take 11.7mL of 6.0-M hydrochloric acid and subsequently add 88.3 mL of water to complete the 100.00 mL.

Regards.

Answer:

Silicon atoms have 14 protons.

Silicon atoms will react with other atoms in order to gain stability.

Silicon atoms have 14 electrons.

The correct answer is 0.72 g/cm3

Explanation:

The density of a material depends on both its mass (amount of matter), which is usually provided in grams (g), and its volume (space occupied), which is provided in units such as cubic centimeters cm3. Moreover, to find how dense the material is, take the mass and divide it into the volume. The process for finding the density of the block of wood is shown below:

[tex]d = \frac{m}{v}[/tex]

[tex]d = \frac{46 g}{64 cm3}[/tex]

[tex]d = 0.718 g/cm3[/tex]

This means the density is 0.71g/cm3 and this can be rounded to 0.72 g/cm3

Answer:

Hydronium ion

The conjugate acid of water is the hydronium ion ; [tex]H_3O^+,[/tex]

Explanation:

It is an ion formed by the association of a hydrogen ion with a water molecule.

Answer:

When the cube was placed in the water, the volume of the water changed. When the liquid was poured from the bowl, the shape changed.

Explanation:

When a cube is placed inside water, the volume of the water will change due to the introduction of the cube as the cube will displace some water. Remember that the shape of a liquid is the shape of its container so the shape of the water remains the same.

When the water is poured into a glass, its shape changes as it now assumes the shape of the glass as explained above.

Answer: When the cube was placed in the water, the shape of the cube stays the same. When the liquid was poured from the bowl into the glass, the shape changed

Explanation:

Answer:

True

Explanation: Imagine the Electrons is by the nucleus which give more energy.

Answer:

the scientific study of matter i believe

Explanation:

because the definition says the branch of science that deals with the identification of the substances of which matter is composed

Answer:

You may assume that the same metal is used in each situation. Light is emitted by electrons when they drop from one energy level to a lower level.

Answer:

Explanation:

A student obtains a clean, dry graduated cylinder. She weighs the cylinder and finds the mass to be 32.64 g. She then fills the cylinder with a certain volume of water. She weighs the water-filled cylinder and finds the total mass to be 61.57 g. If the density of the water in the laboratory is 0.9975 g / mL , what is the volume of the water in the graduated cylinder?

Answer:

Volume of water =29.00mL

Explanation:

mass of cylinder (Mc)=32.64g

mass of water-filled cylinder (Mw+c)=61.57g

mass of water (Mw)= (Mw+c) - (Mc).

=(61.57 - 32.64)g = 28.93g

However:

Density = mass÷volume

hence Volume of water = mass of water÷density of water.

28.93g÷0.9975g/mL = 29.00mL

Given :

Three block of same mass name A , B and C .

Sides of block A , B and C is 3.0 cm , 5.0 cm and 10.0 cm .

To Find :

Which block has the higher  density .

Solution :

We know , density [tex]\rho[/tex] is given by :

[tex]\rho=\dfrac{M}{V}[/tex]   ......1 )

Here , V is volume .

Now , volume V for cube is given :

[tex]V=a^3[/tex]    .......2 )

(  Here , a is the side of cube )

Now ,form equation 1 we can see if mass remains constant then density decrease with increase in volume.

Therefore , cube with minimum side will have higher density , in this case it is 3 cm block .

Hence , this is the required solution .

Answer:

True

Explanation:

In a chemical reaction, there's usually something to do with the composition of the substance. In a physical reaction, the effect could have something to do with appearance or smell.

Hope this helps!