Elizabeth has been asked to design a pool umbrella that can withstand wind speeds of up to 30 miles per hour. Now that she understands the problem, which of the following describes her next step?
A. She can test and evaluate the problem.
B. She can begin to assemble a team.
C. She is ready to design a prototype.
D. She will need to research the problem even more.

Answers

Answer 1

Answer:

The correct option is;

D. She will need to research the problem even more

Explanation:

In other to properly design the pool umbrella that will be reliable and meet the needs of the particular customer, she will need to carry out a basic research about the environment where the pool umbrella is to be used, the presence of other factors that can impact on an idea for the pool umbrella.

She can then proceed to create a concept about the proposed pool umbrella, which is in the form of a paper concept

She will then proceed to carry out a more detailed study based on the paper concept that will consist of concept technology and application as well as functionality.

Answer 2

Answer:

D. She will need to research the problem even more.

Explanation:

If she understands the problem then the next step in the design process would be to continue researching her problem.

Hope this helps!


Related Questions

Use the drop-down menus to choose the correct term or words to complete the statements.

Answers

Explanation:

Search PubMed v use drop down menu and choose MeSH MeSH term: select MeSH ... Tree) Use Links (right side of screen) to return to PubMed and complete the search (Default): ...

Iven Klineberg, ‎Diana Kingston - 2012 -

9. An orifice tube restriction is often indicated by:
A.low gauge pressure
B.high gauge pressure
C.inoperative compressor
D.no compressor cycling

Answers

Answer:

I believe 80% the answer is low gage pressure.

Explanation:

while naturally a restriction of an orifice like placing your thumb on a water hose would cause a high pressure output, however in an entire system if the proper amount of fluid is not making its way through the system then there would be inadequate system pressure. I hope my train of thought is correct though. let me know either way

A/an _____________ comes on if one of the dual hydraulic brake systems should fail or, in some vehicles, if the brake fluid is low.

Answers

Answer: Dash light

Explanation:

A dash light, usually labeled "BRAKE" will illuminated if a braking system fails, or if the brake fluid is low.

An engineer designs a new bus that can drive 30 miles per gallon of fuel. Which of the following was likely one of the client’s most important criteria?

Answers

what are the options?
what are the options ?

1. Of the following answers, which is NOT a method to control dangerous welding processes?
Purge gas damming systems Glove boxes/bags Fume-less electrodes Backing plates

Answers

Answer:

The correct option is;

Purge gas d a m m i n g systems

Explanation:

The hazards that can occur during a welding process includes exposure to molten metal, hot s l a g, flying sparks, ultraviolet light, skin burns from chemicals, inhalation of toxic fumes, fire outbreak, and electric shocks

The purge gas is meant to protect the weld pool from contamination by other reactive gases, such as oxygen and steam, while the weld zone is still molten or very hot. It does not protect the welder from the produced poisonous fumes

Purge gas d a m m i ng systems, are used to reduce the amount of gas used for purging during welding so as to reduce the cost of the consumable inert gas used for welding and the time for welding.

Glove boxes or bags can be used to protect the welder from welding hazards by completely enclosing the work area and holding the poisonous fumes within the enclosure, away from the welder

Fume-less electrodes are electrodes that produce lesser amount of fumes compared to the generally available electrode of similar specification

Backing plates can provide support to hot molten weld metal during welding processes such as e l e c t r o s l a g welding

Answer: Fume-less electrodes

Explanation: I am currently doing dual credits so I have welding classes. Based off my experience, having electrodes that are scentless is risky, because the electrodes can produce harmful chemical too, which therefore you cannot feel until the damage is already done.

Which option is a potential environmental risk of adopting a new technology?
A shorter product life
B harm to an ecosystem
C increase in human diseases
D reduced workplace safety

Answers

Answer:

its b

Explanation:

The option that is a potential environmental risk of adopting a new technology is harm to an ecosystem. The correct option is B.

What is technology?

Technology is the implementation of knowledge of science to the feasible goals of human life, or, as it is frequently referred to, to the modification and deception of the human environment.

The majority of electronics contain non-biodegradable materials, as well as heavy metals and toxic materials such as cadmium, lead, and mercury.

These toxic materials can leach into the ground over time, contaminating the water we drink, the plants we eat, and the animals that live nearby.

Pollution, radiation, noise, land use patterns, the work environment, and climate change are all examples of environmental health risks.

Policies in sectors other than health, such as energy, industry, agriculture, transportation, and land planning, are driving these risks.

Thus, the correct option is B.

For more details regarding technology, visit:

https://brainly.com/question/9171028

#SPJ5

What is a rivet and how do tehey work

Answers

Answer:

A rivet is a mechanical fastener composed of a head on one end and a cylindrical stem on another (called the tail) which has the appearance of a metal pin.

When installed the rivet is either drilled, placed or punched into a hole, afterwards the tail is then deformed, holding the rivet in place. When finished the tail has the appearance of a dumbbell shape completing the riveted joint.

all of the following are steps in the problem solving process except a. try, b. reflect, c. debug, d. define

Answers

Answer:

a

Explanation:

tom scott thinks a deal with ______ is key to take vamderbilt's place
A Rockefellar
B Scott Tom
C Pam Anderson​

Answers

Answer:

A.

Explanation:

Gretchen is looking for a cord with three prongs in the welding shop. Which of the following is the voltage of the power cord?
O 3
O 30
O 10
O 110

Answers

110v positive, negative and ground

how does negative feedback influence the behavior of a system .

Answers

Negative feedback is a process by which a system responds to a change in its output by counteracting that change, which helps to maintain the stability of the system.

How to explain the information

This feedback mechanism is used in many different systems, from biological organisms to technological systems.

In a negative feedback loop, the output of the system is measured, and this measurement is compared to a desired or setpoint value. If the output deviates from the setpoint, the feedback mechanism initiates a corrective action to bring the output back to the setpoint value. This corrective action can be either reducing the input to the system, or increasing it.

Learn more about system on

https://brainly.com/question/14688347

#SPJ1

health and safety concerns and ethical implications are examples of?

Answers

Answer:

Safety ethics

Explanation:

The role of health and safety practitioners in the workplace is often troublesome due to the conflict between their duties to employers and the ethical standards of their occupations. They agree that providing a secure work environment provides the basis for organizational success and credibility in operational and financial efficiency. These leaders are motivated by a profound sense of dedication to ethical values, including the integrity of the workforce, value of life, justice, and achievement of the common good.    

Answer:

constraints

Explanation:

why can planes fly but boats cant and why can boats float but not planes and saying planes fly because of the wind or air is not correct .

Answers

Answer:

Planes can fly because they have wings and jet turbines and boats cant they need wings and planes cant float because there is to much weight

planes can fly because of their wings but they are too much weight to float :)

How would an engineer know if a product design were feasible?
The design has never been developed before.
O The design fits into the engineer's original vision.
O The design has already been proven to keep the cost of the project down.
O The design meets all of the criteria and limitations designated by the project.

Answers

- the last one ‘design meets all the criteria...’
The answer is - The design meets all of the criteria and limitations designated by the project.

The _____ is a voice for small business.

Answers

Answer:

The National Federation of Independent Business (NFIB) is a voice for small business

Explanation:

The National Federation of Independent Business is a not for profit business association with goal of supporting and upholding small business owners right to carry out their privately owned business, protecting them from excessive government intrusions into their businesses.

The association have their headquarters in Tennessee with offices in Washington DC and the capitals of the 50 state capitals making NFIB the most far-reaching and largest association for small business in the U.S.

A coral reef is in danger of being destroyed by a seaside construction project. Which of the following best relates to how an engineer would approach this problem? Engineers would focus their efforts on artificial environments, such as aquariums, and work to develop them in order to preserve endangered species. Engineers would do extensive research on the underwater living environment to see how they could better the situation in a natural way. Engineers would develop a specific product to minimize the problem and create a solution. Engineers would leave this issue to marine biologists since they are the experts in this field.

Answers

Answer:

C.

Explanation:

One of the functions of engineers is to develop a technological solution to any impeding issues or problems. Along the line, before embarking on designing anything, engineers engage themselves in several observations and defining of the problem in question and conduct several research and analysis to reach a technical conclusions.

Base on the question above, Engineers will develop a specific product to minimise the problem and then work on creating a permanent solution.

The best option for answer is therefore C

Answer:

C .Engineers would develop a specific product to minimize the problem and create a solution.

Explanation:

self explanatory :/

s(he's) (gr)e(a)t (r)eall(y)

Which option is a potential environmental benefit of adopting a new
technology?

Answers

Answer:

A reduce pollutants . .....

Name two types of errors and state how each is minimized when measuring the length of objects

Answers

Answer:

Some types of errors are:

Environmental Error Instrumental Errors Observational Errors.Random Errors.

Explanation:

Ways to minimize errors are:

Double check all measurements for accuracy.Double check your formulas are correct.Make sure observers and measurement takers are well trained.Make the measurement with the instrument that has the highest precision.Take the measurements under controlled conditions.

Which of the following is an early practice of sustainable farming?

•soil quality sensors
•crop rotation
•pesticides
•water pumps

Answers

Crop rotation, it’s the earliest known practice, as it was in wide use before the other three were a thing

Answer:

crop rotation

Explanation:

identify one of the advantages of 3d modeling?

Answers

Answer:

Hello Adam here! (UWU)

Explanation:

The advantages of 3D modeling for designers is not limited to productivity and coordination, it is an excellent communication tool for both the designer and end user. 3D models can help spark important conversations during the design phase and potentially avoid costly construction mishaps.

Happy to Help! (>.O)

All boats must have a light on the boat but there are no rules as to wear it has to be *
(10 Points)
True
False

Answers

Answer:

PLS IF YOU FIND IT HELPFUL GIVE ME BRAINLIEST

Explanation:

true

How can a company distinguish between fully certified engineers and those who are not as qualified?
A professional in the same field must write the engineer a letter of recommendation.
b.Fully certified engineers have taken a PE examination and have received a Professional Engineering license.
c.Fully certified engineers must earn at least a master’s degree in their specialty.
d.The engineer will need to work for the company for at least six months in order to gain experience.

Answers

Answer:

The correct option is;

b. Fully certified engineer have taken a PE examination and received a Professional Engineering license

Explanation:

To be recognized as a licensed engineer, it is required for the applicant to have completed a university degree program that lasts up to 4 years and to have worked for up to 4 years under the supervision of a Professional Engineer and pass two exams that test competency of an engineer, known as the Fundamentals of Engineering (FE) exam and the Principles and Practice of Engineering (PE) exam.

Answer:

The correct answer is C for most but be careful the orders can change.

Explanation:

Fully certified engineers have taken a PE examination and have received a Professional Engineering license.

which engineers are requried to have a PE (professional engineer) license?

Answers

Professional engineers need to complete a four year college degree, work under a Professional Engineer for four years, pass two intensive competency exams, and earn a license from their state’s licensure board.

The engineer is required to have a PE (professional engineer) license is mechanical engineering. The correct option is b.

What is PE (professional engineer) license?

Engineering professionals can progress their career goals in a variety of ways with Professional Engineer (PE) Certification. assures an employer or potential employer that an engineer is competent in a specific field.

Professional engineers must complete a four-year degree program, spend four years working for a professional engineer, pass two rigorous competency exams, and obtain a license from their state's licensing agency.

Therefore, the correct option is b, mechanical engineering regarding the license required for work.

To learn more about professional engineering, visit here:

https://brainly.com/question/17344897

#SPJ2

The question is incomplete. Your most probably complete question is given below:

Civil.

Mechanical Engineering.

Electrical.

Production Engineers

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and

Answers

Answer:

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and  systematic and scientific processes.

Explanation:

Engineering is the scientific discipline that deals with the implementation of science on materials, constructions, machines, systems and processes to realize a specific goal. It is an area of ​​technical activity that includes a number of specialized areas and disciplines aimed at the practical application of scientific, economic, social and practical knowledge in order to turn natural resources for the benefit of humans.

The goals of engineering activities are the invention, development, creation, implementation, repair, maintenance and / or improvement of equipment, materials or processes.  Engineering is closely intertwined with science, relying on the postulates of fundamental science and the results of applied research. In this sense, it is a branch of scientific and technical activity.

Answer:

Engineering is a broad category that includes a variety of occupations and attempts to solve problems using math and Science

Edge 2021

Technician A says diesel engines are also called compression ignition engines. Technician B says diesel engines have much higher compression ratios. Who is correct

Answers

Answer:

Both Technician A and Technician B

Explanation: Both technicians are correct.

Answer: I would say Technician A

Explanation:

Hope this helps!!!

It's expected that by 2022 there will be almost _____ Internet users making connections.

A. 4.8 billion
B. 8.4 million
C. 48 million
D. 84 billion

Answers

Answer:

A.

Explanation:

4.8 billion is the answer

Technician A says that the first step in diagnosing engine condition is to perform a thorough visual inspection. Technician B says that oil leaks can be found by measuring straight up from where the oil drips on the floor. Who is right

Answers

Answer:

Technician A

Explanation: Technician A is correct. Technician B is wrong, as an oil leak can trickle down onto other engine components, away from where the leak actually is.

The traditional number of brick in a cube

Answers

Answer:

500 Bricks

Explanation:

For some people their defeee of honesty and integrity depends hevily on two things need and opportunities

Answers

Whenever I hold a strategic planning session, the first value that all the executives agree on is integrity. Leaders know that honesty and integrity are the foundations of leadership. Leaders stand up for what they believe in.

Summarize three attributes that are important for an engineer to possess.

Answers

Answer:

attributes that an engineer to possess are this firstly he or she should have a natural curious about new things that comes up. secondly logical thinking and development he or she should know how to think and make nee development. lastly communication skills

there are lots

natural curious about new things that comes up. secondly logical thinking and development he or she should know how to think and make nee development.

Explanation:

Other Questions
Europeans traded _____ for enslaved American Indians. A. Gold and Silver B.Guns and ammunition C. Chocolate and Tobacco D. Copper and Pearls NAME 5 DIFFERENCES BETWEEN MEXICAN AND AMERICAN HIGH SCHOOLS use the real number line shown below to complete each statement.The letter best represents 0.1525.The letter best represents 95.The letter best represents 15. brody is working two summer jobs, making $10 per hour babysitting and making $15 per hour cleaning tables. In a given week, he can work a maximum of 13 total hours and must earn at least $150. If x represents the number of hours babysitting and y represents the number of hours cleaning tables, write and solve a system of inequalities graphically and determine on possible solution. True or false A hypotheses has been tested many times by different independent researchers but a theory has not The Robinson family is having new carpet installed in the dining room the carpet cost $299 for insulation and $15 for each square yard how many square yards of carpet can be installed at the total cost is $674 what is the correct domain of h PLEASE HELP QUESTION IS ON THE ATTACHMENT !! 5 x [3 x (-2) - 10] i need the answer step by step please Quand nous voyons le film, nous Which values are solutions to the inequality 3x 4 < 2? Check all of the boxes that apply. -4 -2 0 3 A ____________________number can be expresses as a/b where a and b are integers and b does not equal 0. Marias father started a fire in the fireplace. He crumpled some paper, lit a match, and soon the logs in the fireplace were burning. In the case, the stored chemical energy in the logs was changed into Analyze and explain John Locke's philosophy of natural rights, and how the 1770s colonies were the perfect place at the perfect time for them to be put into action. It takes 330 joules of energy to raise the temperature of 24.6 gbenzene from 21 degrees Celsius to 28.7 degrees Celsius at constantpressure. What is the molar hear capacity of benzene at constantpressure? Which of the following is not a defining characteristic of water Low specific heat capacity PolarityCohesion Surface tension If you averaged 400 miles per day, about how many days would a trip of 1990 miles take?A. about 6 daysB. about 5 daysc. about 3 daysD. about 4 daysE. about 3 dayS (f- g)(x) =A. x2 + x-4B. x2 + x + 4C. 12- X+6D. x2+x+6 What type of rock (granitic or basaltic) would be more likely to contain the mineral quartz Why? Which sentence is the best argumentative thesis?O A. The Sun makes up almost all of the mass in the solar system.O B. Both sides of the water rights debate have valid arguments.O C. What will it take to get more Americans to vote in elections?O D. Governments should place stronger restrictions on oil firms.