Answer:
true
Explanation:
have a great day........
When you open the front door to your warm house on a cold day, which way does the heat flow? For example, which is correct to say: "Close the door, you're letting the cold in!" or "Shut the door, you're letting the heat in!".
Answer:
close the door your letting the cold in
1. Three vehicles are traveling at the same speed in the same direction on a 1 point
highway, as shown in the diagram below. If the position of the front of the
white van is -21 m, what is the point of reference?
9514 1404 393
Answer:
The front of the black car
Explanation:
The position -21 is shown on the diagram at the front of the white van. The reference point is the position 0, which is shown on the diagram as the front of the black car.
Answer:
Explanation:
I'm answering this just so you can give the Brainliest to Squaredancefan, a master answerer in my opinion.
The reference point is where the 0 is. Everything to the right is positive and everything left of 0 is minus. 0 is the reference point because it is neither.
A man drops a penny V=0 off the top of the Golden Gate Bridge how fast will the penny be moving when it hits the ground? The golden hat bridge is 275 meters tall
Answer:
Vf = 73.4 m/s
Explanation:
This is the case of vertical motion where we have to find the final velocity of the penny when it hits the ground. We can use 3rd equation of motion to find the final velocity:
2gh = Vf² - Vi²
where,
g = 9.8 m/s²
h = height = 275 m
Vf = Final Velocity = ?
Vi = Initial Velocity = 0 m/s
Therefore,
2(9.8 m/s²)(275 m) = Vf² - (0 m/s)²
Vf = √5390 m²/s²
Vf = 73.4 m/s
The speed with penny dropped from the Golden Gate Bridge hits the ground is 73.4m/s.
Given the data in the question;
Since the penny was at rest before it was dropped
Initial velocity; [tex]u = 0[/tex]Height or distance of the golden hat bridge; [tex]s = 275m[/tex]Final velocity; [tex]v = \ ?[/tex]
To determine the speed with which the penny hits the ground, we use the Third Equation of Motion:
[tex]v^2 = u^2 + 2as[/tex]
Where v is the final velocity, u is the initial velocity, s is the height of the bridge and a is acceleration due to gravity ( since its under gravity; [tex]a = g = 9.8m/s^2[/tex] )
We substitute our values into the equation
[tex]v^2 = 0 + [ 2\ *\ 9.8m/s^2\ *\ 275m]\\\\v^2 = 5390m^2/s^2\\\\v = \sqrt{5390m^2/s^2}\\\\v = 73.4 m/s[/tex]
Therefore, the speed with penny dropped from the Golden Gate Bridge hits the ground is 73.4m/s.
Learn more: https://brainly.com/question/13618089
.
المرور
***
6. find the focal length of alens of power
-2.0D. what type of lens is this?
Answer:
[tex]-\frac{1}{2}[/tex]
Diverging lens
Explanation:
Given parameters:
Power of lens = -2.0D
Unknown:
Focal length = ?
Solution:
The power of lens is the reciprocal of the focal length;
P = [tex]\frac{1}{f}[/tex]
where f is the focal length
f = [tex]\frac{1}{P}[/tex] = [tex]-\frac{1}{2}[/tex]
The lens is a diverging lens
when climbing a steep hill, would you want a larger or smaller bicycle gear?
Answer:
Usually when climbing, it's best to be in the small front ring and the largest back ring. If your cadence is about 100 rpm, then whatever gear you're in is fine. It depends on the road, but as long as your pedaling is at a level you're comfortable with, you're fine.
Explanation:
Google answer by the way.
Please help! I’ll give brainliest! :)
Answer:
C.) Gravity
Explanation:
The projectile is an object upon which the only force is gravity. Gravity acts to influence the vertical motion of the projectile.
One particle has a charge of -1.87 x 10-9C, while another particle has a
charge of -1.10 x 10-9 C. If the two particles are separated by 0.05, what is
the electromagnetic force between them? The equation for Coulomb's law is
Fe = kqjge, and the constant, k, equals 9.00 x 10-9 Nm2/C2,
A. 7.41 x 10-6N
B. -7.41 x 10-6N
C. 3,70 x 10-7N
O
D. -3,70 x 10-7N
Answer:
7.41 x 10⁻²⁴ N
Explanation:
F = (K x the charges of the two particles)/ the square of the distance which is 0.05.
The answer is not here but it seems two of the options are the same so I'll assume its A since the answer isn't negative
Answer:
A
Explanation:
just did it
{hope it helps <3 }
There is friction between the block and the
table.
The suspended 2 kg mass on the left is
moving up, the 4 kg mass slides to the right
on the table, and the suspended mass 4 kg on
the right is moving down.
The acceleration of gravity is 9.8 m/s
2
.What is the magnitude of the acceleration
of the system?
1. 1.67253
2. 1.9845
3. 1.75311
4. 2.47673
5. 2.1315
6. 2.058
7. 2.548
8. 1.33933
9. 1.5288
10. 2.03127
Answer in units of m/s
2
.
Answer:
5 no
Explanation:
actually the 4kg lying on table has no influence
it slides towards 4kg weight hung
as it has excess 2kg force
force=miu × m ×g
The magnitude of acceleration of the entire system is [tex]2.1315 \;\rm m/s^{2}[/tex]. Hence, option (5) is correct.
Given data:
The masses suspended from the table are, m = 2 kg and m' = 4 kg.
And the mass kept on the table is, m'' = 4 kg.
The frictional force will oppose the motion of mass 4 kg, kept on the table. Then the required value of frictional force is,
[tex]f = \mu \times m'' \times g\\\\f = 0.11 \times 4 \times 9.8\\\\f = 4.312 \;\rm N[/tex]
Since, the mass kept on the right side is more. Then at equilibrium,
-f + m''g + (m' +m)a = m'g
Here,
a is the magnitude of acceleration of the system.
Solving as,
-4.312+ 4(9.8) + (4 -2)a = 4(9.8)
2a = 4.312
[tex]a \approx 2.1315 \;\rm m/s^{2}[/tex]
Thus, we can conclude that the magnitude of acceleration of the entire system is [tex]2.1315 \;\rm m/s^{2}[/tex]. Hence, option (5) is correct.
Learn more about the linear acceleration here:
https://brainly.com/question/14214161
Skin cells have the function of protecting the body. What is the function of muscle cells?
Answer:
Skin serves as a protective barrier, a way to sense the world, and a layer that keeps nutrients and water inside the body. Four types of cells make up the skin, and they are produced mainly in the epidermis near the basement membrane. Keratinocytes contain structural keratin and make up the bulk of the epidermis.
Explanation:
Hi there can you guys please help me write 2 paragraphs (4-6 sentences) about in article ("How Many Sets & Reps Should I Do? (Building the Correct Workout Plan)" (Links to an external site.)
Answer:
well, to create the correct workout plan I think the first day you should do as many reps as you can for each muscle you are targeting. you should also have a day you rest so your body's muscles can build. Monday, Wednesday, Friday are your workout days. Tuesday, Thursday, and Saturday are your rest days. And Sunday can be anything whether it's going to the gym, yoga, or another rest day. But back to the reps, the days you do reps, each day you should be trying to get one more rep/set than the last. If a person is new to working out then they should have a goal of ten rep/sets or something like that, so they don't overwork themselves or tear a muscle. I don't really have any other ideas for a workout plan besides just trying to be consistent and not overworking yourself, but I hope this helps. <3
Explanation:
You'll have to add on your own ideas to make it longer and add a bit more detail of course but I think you'll do well.
What is an amu?
lol I'm asking alot of questions
What is time ?
which clock is used to measure accurate time.
Answer:
If this is what your asking?
Explanation:
The concept of time is self-evident. An hour consists of a certain number of minutes, a day of hours and a year of days. ... Time is represented through change, such as the circular motion of the moon around Earth. The passing of time is indeed closely connected to the concept of space
Four solutes are added to a solvent. All solutes have the same mass and solubility. The surface areas of four solutes are 2 mm2, 4 mm2, 6 mm2, and 10 mm2. Which solute will dissolve the quickest? 2 mm2 4 mm2 6 mm2 10 mm2
Answer:
The correct answer is D.) 10 mm2
Explanation:
i just did the test on edge 2020 and got it right
If four solutes that have the same mass and solubility are added to a solvent, the solute that will dissolve the quickest is 10mm².
What is solubility?Solubility refers to the ability of a substance called solute to form solution with another substance called solvent.
Solubility is dependent on the surface area of the solute as solutes with larger surface area tends to dissolve faster in a solvent and vice versa.
Therefore, this means that if four solutes that have the same mass and solubility are added to a solvent, the solute that will dissolve the quickest is 10mm².
Learn more about solubility at: https://brainly.com/question/15560070
what are the 5 destructive tests used in fiber analysis
I have a really long assignment I don't understand! please help
I can try and help whats it about?
Why are electromagnets more useful than permanent magnets in many
modern technologies?
A. A power supply is not necessary to use an electromagnet.
B. Electromagnets can be turned on and off by controlling the
current.
C. Permanent magnets with the same strength are heavier.
D. The strength of the magnetic field is more consistent in
permanent magnets.
Answer: Electromagnets can be turned on and off by controlling the current
Explanation:
B. By controlling the current, electromagnets can be turned on and off
Kinetic vs potential energy
Answer:
Kinetic energy is the energy obtained from movement while potential energy is the energy in something when it is at a height or has been manipulated in some way; it has work done to it.
Explanation:
Kinetic energy is, like I said, energy gained through movement or action. When an object stops moving, it converts into a different type of energy. Energy cannot be destroyed or created. An object with potential energy has a reference. A reference determines how high it is. The higher and heavier an object is, the more potential energy it has.
Hope this helps!
f a substance is ionic, then it likely will
Answer:
Many ionic substances will dissolve completely in water to form an aqueous solution of cations and anions; this solution will conduct electricity.
Explanation:
Answer:
Many ionic substances will dissolve completely in water to form an aqueous solution of cations and anions; this solution will conduct electricity.
Explanation:
The number of wavelengths that pass a point each per second is:
A. transverse wave
B. period
C. longitudinal
D. frequency
Pls can you help me
Explanation:
d frequency I learned it last year
The number of wavelengths that pass a point each second is referred to as the frequency of a wave. The correct option is D.
What is the frequency?Frequency is defined as the number of cycles (or wavelengths) that pass a point in one second and is measured in units of Hertz (Hz). For example, if a wave has a frequency of 10 Hz, it means that 10 complete cycles (or 10 wavelengths) pass a point in one second.
A transverse wave is a type of wave where the particles of the medium move perpendicular to the direction of the wave motion. Examples of transverse waves include light waves and electromagnetic waves.
Period refers to the time it takes for one complete cycle of a wave to occur. It is measured in units of seconds (s) and is the reciprocal of the frequency. So, period and frequency are inversely proportional to each other.
A longitudinal wave is a type of wave where the particles of the medium move parallel to the direction of the wave motion. Examples of longitudinal waves include sound waves and seismic waves.
So, the number of wavelengths that pass a point each second is known as the frequency of a wave and is measured in units of Hertz (Hz).
Therefore, the correct answer is D. frequency.
To learn about the relationship between wave energy and amplitude click:
https://brainly.com/question/17003906
#SPJ3
In a transverse wave wavelength can be measured as the distance between a. Two adjacent crests. b. A crest and the adjacent trough. c. A crest and the resting position. d.None of the above
Answer:
a)Two adjacent crests
Explanation:
Transverse wave is a moving wave that
in which the point of oscillation is at right angle to the direction of the wave. The particle of the medium of transverse wave usually vibrate at right angle to the wave's direction in up and down movement. Wavelength can be measured in the direction the wave is going can defined as the distance between two successive crest of the particular wave. It can be calculated as Wavelength= velocity/ frequency. Which means where there is higher frequency of the wave, then there will be shorter wavelength.
Hence, transverse wave wavelength can be measured as the distance between Two adjacent crests.
CHECK THE ATTACHMENT FOR THE WAVE FIQURE
The table shows the specific heat capacities of various substances. How much energy is required to raise the temperature of 5g of air by 10°C? Use the table below to help you.
Answer:
50.25 j
Explanation:
Alex HEYYYYYYYYY
Answer:
The table shows the specific heat capacities of various substances. How much energy is required to raise the temperature of 5g of air by 10°C? Use the table below to help you.
"10 J" is WRONG
The right answer is "50.25 J"
Explanation:
hope this helps
Identify the correct order of increasing intermolecular force of attraction for the three most common states of matter.
A)
Liquid - solid - gas
B)
solid - liquid - gas
gas - liquid - solid
D)
gas - solid - liquid
Answer:
The answer is C.
Explanation:
What determines the amount of thermal energy of an object?
A box is pushed horizontally with constant speed across a rough horizontal surface.
Which of the following must be true?
Answer:
what is the answers? so i can't answer.
Explanation:
The statement that is true as regards movement of the box when pushed horizontally with constant velocity is given by;
Option D; The friction is equal to the applied force
The missing options are;
a) The friction is less than the applied force
b) There is no friction acting on the box
c) The friction is greater than the applied force
d) The friction is equal to the applied force
We are told that the box is pushed with constant speed. We know that at constant speed, acceleration is equal to zero. If acceleration is zero, the 2 forces acting on the box will be the applied force and the frictional force from the rough horizontal surface.
Now, if the frictional force was less than the applied force, it means the velocity of the box will gradually be increasing but we are told the velocity is constant.
Also, if the frictional force is more than the applied force, it means the object will not move because the force of resistance is more than the applied force.Finally, if the frictional force is equal to the applied force, then the box will move with a constant motion.
Thus, in conclusion the friction is equal to the applied force.
Read more at; https://brainly.com/question/25152945
NEED ASAP!! 23 POINTS!! Look at the pic above and tell me the velocity, distance and time. Thanks!
Answer:
Vp = 66.67 [mi/h]
Explanation:
To solve this type of problem we must remember that speed is defined as the relationship of space between time.
speed = distance/time
7)
v = speed = 100 [km/h]
distance = 750 [km]
time = distance/speed
time = 750/100
t = 7.5 [h]
8)
v1 = 200/3 = 66.67[mi/h]
v2 = 100/1.5 = 66.67 [mi/h]
Vp = average speed = (v1+v2/2)
Vp = (66.67 + 66.67)/2
Vp = 66.67 [mi/h]
answer is 9 Billion due to the decrease in Cactus
Which word best describes a good scientific question? narrow-focused unanswerable broad testable
Answer:
Testable
Explanation:
Because don't you have to test the question to see if its right so It has to be testable
Answer:
Testable
Explanation:
No ex-planation
Please answer both of them ill give you brainliest
Answer:
0.000987313 N Im not sure HAHAHAH
Jupiter's four large moons – Io, Europa, Ganymede, and Castillo – were discovered by Galileo in 1610. Jupiter also has dozens of smaller moons. Jupiter's rocky, volcanically-active moon Io is about the size of Earth's moon (7.22 x 1022 kg). Io has a radius of about 1.82 x 106 m, and the mean distance between Io and Jupiter is 4.22 x 108. If Io's orbit were circular, how many earth days would it take for Io to complete one full revolution around Jupiter? If Io's orbit were circular, what would its orbital speed be?
Answer:
The orbital speed is approximately 17,325.57 m/s
The number of Earth days it would take lo to complete its orbit is approximately 1.77 days
Explanation:
The given parameters are;
The mass of lo, m ≈ 7.22 × 10²² kg
The radius of lo, R ≈ 1.82 × 10⁶ m
The mean distance between Jupiter and lo = 4.22 × 10⁸ m
The orbital equation is given as follows;
[tex]\dfrac{m \cdot v^2}{R} = \dfrac{G \times M \times m}{R^2}[/tex]
[tex]\therefore v = \sqrt{\dfrac{G \cdot M}{R} } = \sqrt{\dfrac{ 6.67408 \times 10^{-11} \times 1.898 \times 10^{27}}{4.22 \times 10^8} } = 17,325.57 \ m/s[/tex]
The orbital speed ≈ 17,325.57 m/s
The time to complete one orbit = (2 × π × 4.22 × 10⁸)/(17325.57) ≈ 153039.94 s
The time to complete one orbit ≈ 153039.94 s ≈ 1.77 days
The number of Earth days it would take lo to complete its orbit ≈ 1.77 days.
The number of Earth days it would take lo to complete its orbit will be 1.77 days. While the orbital speed will be 17,325.57 m/s.
What is orbital speed?
The speed required to establish an equilibrium between gravity's pull on the satellite and the inertia of the satellite's motion is referred to as orbital speed.
The given data in the problem is;
m is the mass of lo≈ 7.22 × 10²² kg
R is the radius of lo ≈ 1.82 × 10⁶ m
The mean distance between Jupiter and lo = 4.22 × 10⁸ m
The orbital speed is given as;
[tex]\rm V= \sqrt{\frac{GM}{R} } \\\\ \rm V= \sqrt{\frac{6.67 \times 10^{-11} \times 1.898 \times 10^{27}}{4.22 \times 10^8} } \\\\ \rm V=17,325.57 \ m/sec[/tex]
The time to complete one orbit is given as;
[tex]\rm T=\frac{ (2 \times \pi \times 4.22 \times 10^8)}{17325.57 } \\\\ \rm T= 153039.94 \ s[/tex]
In one day there are 86400 seconds from that calculation the number of days required to complete one orbit will be 1.77 days
Hence the number of Earth days it would take lo to complete its orbit will be 1.77 days. While the orbital speed will be 17,325.57 m/s.
To learn more about the orbital speed refer to the link;
https://brainly.com/question/541239
John has an object suspended in the air. It has a mass of 50 kilograms and is 50 meters above the ground. Calculate the objects potential energy.
Answer:
the objects potential energy is 24500 J.
hope this helps <3
I have to write something here, so like hello and please help
Answer:
the extension would be less the new extension might be 3 cm
Explanation: