Mass of the pure silver deposited on a metal object made into the cathode of the cell is calculated to be 0.0217 gm.
What is electroplating?The process of using electrodeposition to coat an object in a layer of metal is called electroplating .
As we know that, Q = I * t
=0.270 * 72
= 19.44 C
Here Q is quantity of electricity , I is current in amperes = 0.270 A (given)
t is time in seconds (72.0 sec)
As 96500 Coulomb of electricity electrolyzes 1 mole of Ag
then,19.44 C of electricity deposits,
=1/96500 * 19.44
= 0.000201 moles of Ag
Mass of Ag is = number of moles * molar mass
= 0.000201 * 108
= 0.0217 gm
Thus, mass of pure silver deposited on a metal object made into the cathode of the cell is 0.0217 gm.
To know more about electroplating, refer
https://brainly.com/question/16266707
#SPJ4
At high temperatures, the proton transfer rate is dominated by the barrier-crossing process. The barrier is 2.40 kJ/mol at 298 K, and the Arrhenius prefactor A=6.00 x1011 s1. At low temperatures, the rate is dominated by proton tunneling. In this case, the proton tunneling rate constant is ktunnel = 1.41 x1010 s-1. a. Calculate the classical rate of proton transfer, kclassical from the barrier at 298 K. b. At which temperature, Teritical, is ktunnel = kclassical? c. Do you expect Teritical to increase or decrease if deuterium (H) is substituted for hydrogen? Explain. d. If the spacing between the minima is doubled but the barrier height remains the same, do you expect Teritical to change? Explain.
Pre-exponential factor can be obtained from the Arrhenius pre-factor and using this we can calculate the classical rate of proton transfer.
Pre-exponential factor (A) is an important component of the Arrhenius equation, which was formulated by the Swedish chemist Svante Arrhenius in 1889. The pre-exponential factor is also known as the frequency factor. It represents the frequency of collisions between reactant molecules at a standard concentration. it is actually dependent on temperature because it is related to molecular collision, which is a function of temperature. because the pre-exponential factor depends on frequency of collisions, it is related to collision theory and transition state theory. The collision theory deals with gases and neglects to account for structural complexities in atoms and molecules.
To learn more about Arrhenius exponential factor please visit:
https://brainly.com/question/14781395
#SPJ4
the 1995 nobel prize in chemistry was shared by paul crutzen, f. sherwood rowland, and mario molina for their work concerning the formation and decomposition of ozone in the stratosphere. rowland and molina hypothesized that chlorofluorocarbons (cfcs) in the stratosphere break down upon exposure to uv radiation, producing chlorine atoms. chlorine was previously identified as a catalyst in the breakdown of ozone into oxygen gas. using the enthalpy of reaction for two reactions with ozone, determine the enthalpy of reaction for the reaction of chlorine with ozone. Using the enthalpy of reaction for two reactions with ozone, determine the enthalpy of reaction for the reaction of chlorine with ozone. ClO(g) + O3(g) rightarrow Cl(g) + 2Oz(g) deltaH = -122.8 kJ/mol 2O3(g) rightarrow 3O2(g) deltaH =--285.3 kJ/mol O3(g) + Cl(g) rightarrow ClO(g) + O2(g) deltaH = ?
The bond enthalpy of the bond formed between chlorine and ozone is the 122.8 kJ
Definition of Hess's Law,
Hess's law states that the "increase in enthalpy in a chemical reaction i.e., reaction heat at constant pressure is independent of the process between the initial and final states".
Inverse equation (1): Cl (g) + 2O₂ (g) → Cl) (g) + O₃ (g) ∆H = +122.8 kJ / mol (NOTE: change in sign of ∆H)
Copy equation (2): 2O₃ (g) → 3O₂ (g) ∆H = -285.3 kJ / mol
Adding the 2 equations we get:
2O₃ (g) + Cl (g) + 2O₂ (g) → Cl (g) + O₃ (g) + 3O₂(g) and cancel common species.
Learn more about Hess's law from the link given below.
https://brainly.com/question/13539390
#SPJ4
indicate the number of protons and neutrons in the following nuclei. part a 5624mn2456mn express your answers as integers separated by a comma.
in the following nuclei. part a 5624mn2456mn is number of protons = 24 and number of neutrons = 56 - 24 = 32
fozrmula to calculate protons and neutron are atomic number = number of protons , mass number = number of protons + number of neutrons With the exception of simple hydrogen, neutrons are subatomic particles found within the nucleus of all atoms. The pseudonym of the particle stems from the fact that it lacks any electrical charge; it is neutral. Neutrons have an extremely high density. A proton is an elementary particle discovered in every nucleus of the atom. The atom has a positive charge that is equivalent to and contrary to the electron's. A single proton has a mass of only 1.673? 10-27 kilogramme if secluded, which is mildly smaller than the mass of a neutron. Offsetting the atomic number as from atomic mass yields the number of neutrons in an atom.
Learn more about protons here:
https://brainly.com/question/12535409
#SPJ4
ca(s) zncl then, write balanced half-reactions describing feso4 mg the oxidation and reduction that happen in this reaction g
The calcium molecule undergoes oxidation while zinc molecule undergoes reduction during the redox reaction.
What is redox ?
It is a type of reaction in which there is an exchange of electron between two reactant species. During which one reactant under reduction and the other reactant undergoes oxidation.
Let the atoms in it ionic form-
[tex]Ca (s) + Zn^{2+} (aq)[/tex] → [tex]Zn (s) + Ca^{2+} (aq)[/tex]
Oxidation :
[tex]Ca (s)[/tex] → [tex]Ca^{2+} (aq) + 2e^{-}[/tex]
Reduction :
[tex]Zn^{2+} (aq) + 2e^{-}[/tex] → [tex]Zn (s)[/tex]
Hence we can see that in the following redox reaction, calcium changes its oxidation state from 0 to +2 and zinc changes its oxidation state from +2 to 0 as it undergoes reduction.
To learn more about redox click here:
https://brainly.com/question/459488
#SPJ4
A science class is conducting an investigation to see how gravity affects objects of different masses. They drop three balls from the same height. They time how long it takes the balls to hit the ground. What are the students comparing?(1 point) Responses the mass of each ball the mass of each ball the time it takes for each ball to fall the time it takes for each ball to fall the gravitational attraction of each ball the gravitational attraction of each ball the height from which each ball is dropped
Answer:
2
Explanation:
A 0.125-gram sample of a monoprotic acid of unknown molar mass is dissolved in water and titrated with 0.1003 M NaOH. The equivalence point is reached after adding 20.77 mL of base. What is the molar mass of the unknown acid?
The equivalence point is reached after adding 20.77 mL of base. The molar mass of unknown acid is 60 g/mol
given that :
mass of the monoprotic acid = 0.125 g
molarity of NaOH = 0.1003 M
volume = 20.77 mL = 0.02077 L
the number of moles = molarity × volume in L
= 0.1003 × 0.02077
= 0.00208 mol
moles = mass / molar mass
molar mass = mass / moles
= 0.125 g / 0.00208 mol
= 60 g /mol
Thus, A 0.125-gram sample of a monoprotic acid of unknown molar mass is dissolved in water and titrated with 0.1003 M NaOH. The equivalence point is reached after adding 20.77 mL of base. the molar mass of the unknown acid is 60 g/mol.
To learn more about molar mass here
https://brainly.com/question/24129148
#SPJ4
If any of the the ions comprising an insoluble ionic solid remain in solution, which statement below best describes the state of saturation? Select the correct answer below: O The solution must be saturated. O The solution must be supersaturated. O The solution must be unsaturated. O The solution could be saturated, supersaturated or unsaturated.
If any of the ions comprising an insoluble ionic solid remain in the solution, The solution must be supersaturated.
Known as a saturated solution, this fluid is created when the maximum amount of solute dissolves at a specific temperature. A solution is said to be supersaturated if there is more solute present than is necessary to reach saturation.
By adding a tiny amount of solute, you can quickly determine if a solution is saturated, supersaturated, or neither. The solute will dissolve in a solution that is not saturated. That is not the case if the solution is saturated. The solute you've added will rapidly form crystals if the solution is supersaturated.
Supersaturation is a non-equilibrium physical state where a solution contains more solute than the equilibrium solubility permits under the circumstances, such as the system's temperature and pressure.
For more information on supersaturation kindly visit to
https://brainly.com/question/16817894
#SPJ4
frederick griffith heat-killed a culture of pathogenic bacteria. he split the sample and injected half of it into mice. the mice lived. he then mixed the other half with a living, nonpathogenic bacteria strain and injected the mixture into mice. the mice died. these results best support which of the following conclusions.
A chemical that was transferred from pathogenic to nonpathogenic bacteria is what the data show to be the most convincing.
Bacteria that can cause disease are known as pathogenic bacteria. The pathogenic bacteria for humans are the main topic of this essay. The majority of bacterial species are benign and frequently helpful, but others can spread infectious illnesses. Less than 100 of these pathogenic species are thought to exist in humans.
They contain elements that facilitate bacterial adhesion to and invasion of cells and tissues. Some bacteria can easily avoid the body's defenses, while others create poisons that lead to symptoms and disease. The virulence factors that are produced are precisely controlled and regulated.
Pathogenic bacteria examples include:
Pseudomonas aeruginosa - may result in blood infections and pneumonia.The cause of tuberculosis is Mycobacterium tuberculosis.Foodborne illnesses and flu-like symptoms are brought on by listeria.E. coli is a bacteria that causes intestinal infections that manifest as fever and diarrhoea.
To learn more about pathogenic bacteria. Please visit the below link.
https://brainly.com/question/17967098
#SPJ4
An electron in the hydrogen atom makes a transition from an energy state of principal quantum numbers into the n=2 state. If the photon emitted has a wavelength of 434 nm, what is the value of ni? (RH = 2.18 X 10-18 J)
If an electron in a hydrogen atom changes from an energy level with primary quantum numbers to the n=2 state, emitting a photon with a wavelength of 434 nm, the value of ni is five.
what does Rydberg's equation explains?
The wavelength of light produced by an electron transitioning between atomic energy levels is predicted by the Rydberg formula. There is just one spectral fingerprint for each element. Light is created when an element is heated in its gaseous state. Bright lines of different colours can be seen when this light filters through a prism or diffraction grating. Each component stands out from the others in some way.
According to the question:
A single electron species makes up hydrogen.De-excited from one energy level to another, the electron emits a photon with a certain wavelength.To determine the energy level from which the electron has transitioned, we must utilise Rydberg's formulaTo know more about Rydberg's equation:
https://brainly.com/question/13185515
#SPJ4
Answer questions a-c about the Bronsted acid-base reaction below using the identifying letters A-D below each structure. The pKa's for the acids of interest are: water (pKa= 15.7), and acetic acid (pKa = 4.8).
CH3C OH + HOH OH acetic acid hydroxide acetate water
a) The stronger acid is:
b) Its conjugate base is:
c) The species that predominate at equilibrium are (two letters, e.g. ac):
Acetic acid is a strong acid because its PKa value is lower, Acetate is its conjugate base, At equilibrium, the product will be dominant. as the acid-base reaction produces conjugate base and water
In an aqueous solution, strong acid is completely distanced. It is a chemical substance with a high proton loss capacity, H+. A strong acid loses one proton in liquid, which is managed to capture by liquid and forms the order to accurately describe ion: HA(aq) + H2O H3O+(aq) + A (aq) In an aqueous solution, a strong acid is totally ionised. In an aqueous solution, a weak acid is one that ionises only mildly. Strong acids, including such hydrochloric acid, have a pH of 0 to 1 at the concentrations commonly used in laboratories. The greater the amount of hydrogen ions present in the solution, the lower the pH.
learn more about strong acid here:
https://brainly.com/question/16749233
#SPJ4
Suppose you wanted to convert a carboxylic acid into an amide in a mild, two-step method using the reactions we have discussed in Chapter 21. The intermediate (product of the first step) would be a(n) , and the key reagent in the first step would be You would then react the product with a compound containing a(n) functional group to achieve synthesis of the target amide.
The carboxylic acid initially transforms into an ammonium salt, which, when heated, yields an amide. Solid ammonium carbonate is added to an excess of acid to create the ammonium salt.
For instance, ammonium ethanoate is produced by mixing too much ethanoic acid with ammonium carbonate.
2CH3COOH+(NH₄)2CO₃→2CH₃COONH₄+H₂O+CO₂(1)
When the reaction gets completed, the mixture is heated and the ammonium salt dehydrates producing the ethanamide.
CH₃COONH₄→CH₃CONH₂+H₂O
The extra ethanoic acid is needed to stop the ammonium salt from dissociating before it dehydrates. When heated, ammonium salts frequently separate into ammonia and the parent acid, then come back together when cooled. In this scenario, ammonia would escape from the reaction mixture and be lost if dissociation occurred. There could be no recombination. Dissociation can be reversed:
CH₃COONH₅(s)⇌CH₃COOH(l)+NH₃(g)
The presence of the excess ethanoic acid helps to prevent it from happening by moving the position of equilibrium to the leftside of the reaction.
To know more about conversion of carboxylic acid, please refer:
https://brainly.com/question/26723105
#SPJ4
How many grams of sodium fluoride are present in 500 mL of a 2.4 M sodium solution?
Answer: 2.4 x 0.5 = 1.2 grams
Explanation:
Provide the IUPAC name and structure for the alkyne expected to produce the two compounds listed below upon ozonolysis. CH3CH2CO2H and (CH3)3CCO2H
These alkynes are anticipated to ozonolyze to form the following two compounds: 2,2-dimethyl-3-hexyne.
Explain compounds in detail.A compound is a material that is created when two or more distinct chemical components are mixed in a certain proportion. When the elements come together, they interact and create chemical connections that are hard to break. The sharing or trading of electrons between atoms results in the formation of these bonds.
What kind of substance is this, exactly?A material that has been chemically bonded together from two or more distinct components. Water (H2O), which is a combination of the elements hydrogen and oxygen, and table salt (NaCl), which is a composite of the elements sodium and chloride, are two examples of compounds.
To know more about Compounds visit:
https://brainly.com/question/14117795
#SPJ4
Question 29 (3 points)
Hydrocarbons are compounds that are made up of only carbon and hydrogen atoms.
Write the skeleton equation and balanced chemical equations, including all states of
matter, for the complete combustion of propane (C3H8). [3 marks]
Answer:
Explanation:
The skeleton equation for the complete combustion of propane (C3H8) is:
C3H8 + O2 -> CO2 + H2O
The balanced chemical equation for the complete combustion of propane (C3H8), including all states of matter, is:
2 C3H8 (g) + 9 O2 (g) -> 6 CO2 (g) + 8 H2O (g)
In this equation, the propane (C3H8) is in the gaseous state, and the oxygen (O2) and the products (CO2 and H2O) are also in the gaseous state. This equation shows that when propane (C3H8) undergoes complete combustion, it reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) as products. The coefficients in front of each chemical species indicate the number of moles of each substance that are involved in the reaction.
if an antacid tablet weighed 1.6 grams, how many moles of gastric acid (hci) would it neutralize? use the results obtained in data tables 1 and 2 to explain and quantify your answer.
If Antacid tablet weighed 1.6 grams the 0.015 moles of gastric acid will neutralized.
Antacids neutralize the gastric acid in stomach by stopping an enzyme that creates acid to break down food for digestion. The antacids act by neutralizing the acid in the stomach and by inhibiting pepsin which is a proteolytic enzyme.
1 gram Antacid neutralized HCL = 0.342 gram
This is calculated from the expression for equivalence point in the titration.
1.6 gram Antacid neutralized HCL is,
( 0.342gram HCL/ 1 gram antacid ) . 1.6 gram antacid
= 0.5472 gram
Molar mass of HCL = 36.5 gram
Moles of HCL = 0.5472 gram / 36.5 gram = 0.01499
so, the moles of HCL is 0.015 mole.
To learn more about Neutralizing Antacids please visit:
https://brainly.com/question/5328009
#SPJ4
For parts of the free-response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. HCl(aq) + NaOH(aq) + NaCl(aq) + H20(1)A student was given the task of titrating a 20.mL sample of 0.10MHCl(aq) with 0.10MNaOH(aq) . The HCl(aq) was placed in an Erlenmeyer flask. An equation for the reaction that occurs during the titration is given above.(a) According to the equation for the reaction, if the amount of the reactants is halved, how does this affect the amount of H20(1) produced in the reaction?(b) The equation above is not written in net ionic form. Write the correct net ionic equation for the reaction.
a) If the amount of reactants (NaOH and HCl) is halved then the water produced in the reaction is also halved.
b) The net ionic equation for the reaction can be written as:
H⁺ (aq) + OH⁻ (aq) → H₂O (l)
What are the net ionic equations?The net ionic equation of a reaction can be described as an equation that represents in terms only those elements, ions, or compounds, that directly contributed to the reaction.
We can write a chemical equation for the reaction of HCl and NaOH:
HCl(aq) + NaOH (aq) → NaCl (aq) + H₂O (l)
The complete ionic equation of the given reaction is can be written for the above reaction is:
H⁺ (aq) + Cl⁻ (aq) + Na⁺ (aq) + OH⁻ (aq) → Cl⁻ (aq) + Na⁺ (aq) + H₂O (l)
In the ionic equation, the Na⁺ and Cl⁻ ions appear unchanged on both sides of the equation. When we mix the two solutions, neither the Na⁺ nor Cl⁻ ions participate in the reaction. So Na⁺ and Cl⁻ ions can be eliminated from the complete ionic equation.
H⁺ (aq) + OH⁻ (aq) → H₂O (l)
Learn more about the net ionic equation, here:
brainly.com/question/15466794
#SPJ1
1) You are given an unknown solution, which contains both aqueous barium ion, Ba' (ag), and aqueous lead(11) ion, Pb2+ (aq). Which of your six solutions would allow separation of the ions? Select all that apply A. Ammonium chloride, NH,Cl(aq) B. Cobalt(II) nitrate, Co(NO3)2(aq) C. Silver nitrate, AgNO3(aq) D. Sodium chloride, NaCl(aq) E Sodium hydroxide, NaOH(aq) F Sulfuric acid, H2SO (aq)
Ammonium chloride will be the solution that separates aqueous barium ion and aqueous lead(II) ion out of the six solutions.
What is the described solution?
A solutions is any combination of one or more solutes that have dissolved in a solvent. A solute must dissolve in a solvent to produce a homogenous solution. A component must dissolve in a solution to produce a homogeneous mixture.
What exactly is a water solution?
A homogenous molecular mixture of two or more substances is referred to as a solution (uniform throughout). In this context, aquous solution, often known as a solution of water, refers to water functioning as a solvent. For example, the solute is salt and the solution is water in a mixture of salt and water.
To know more about solution visit:
https://brainly.com/question/1416865
#SPJ4
Identify the products in the reaction below: *
Fe₂O3 + 3CO →→2Fe + 3C0₂
O Fe203
O Fe203, CO
Fe, CO2
O CO2
h
Answer:
The products in the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to produce iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction.
Explanation:
In a chemical reaction, reactants are the substances that are combined to produce a new substance or substances. In this case, the reactants are Fe2O3 and CO, which are combined to form the products Fe and CO2. A product is the substance that is formed as a result of the chemical reaction. In this reaction, Fe and CO2 are the products.
The products of the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to make iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction. Therefore, option C is correct.
What is chemical reaction ?The term chemical reaction is defined as a process in which one or more substances, also called reactants, are converted to one or more different substances, called as products.
A chemical reaction rearranges the constituent atoms of the reactants to produce various products. The properties of the products differ from the properties of the reactants.
Reactants are the substances that combine in a chemical reaction to produce a new substance or substances. The reactants in this case are Fe2O3 and CO, which combine to form the products Fe and CO2. The substance formed as a result of the chemical reaction is referred to as a product. The products of this reaction are Fe and CO2.
Thus, option C is correct.
To learn more about the chemical reaction, follow the link;
https://brainly.com/question/29762834
#SPJ2
according to the following reaction, how many grams of dinitrogen monoxide will be formed upon the complete reaction of 21.7 grams of ammonium nitrate? ammonium nitrate (aq) dinitrogen monoxide (g) water (l) grams dinitrogen monoxide
11.935 grams of dinitrogen monoxide (g) is formed during the given reaction.
Reaction of the given question is:
[tex]NH_4NO_3 (aq) - > N_2O (g) + 2H_2O (l)[/tex]
So according to Stoichiometry on complete decomposition of ammonium nitrate (aq) same number moles of dinitrogen monoxide (g) will be formed i.e if of ammonium nitrate (aq) have x moles initially then after complete reaction x moles of dinitrogen monoxide (g) will be formed.
so in order to calculate number of moles of [tex]NH_4NO_3[/tex] we will divide given mass of [tex]NH_4NO_3[/tex] with the molar mass of [tex]NH_4NO_3[/tex].
let number of moles of [tex]NH_4NO_3[/tex] be x
given mass of [tex]NH_4NO_3[/tex] is 21.7 grams
then x = [tex]\frac{given mass (NH_4NO_3)}{molar mass(NH_4NO_3)}[/tex]
molar mass of [tex]NH_4NO_3[/tex] = 14 + 1*4 +14 +3 *16
=> 14+4+14+48
=>80 grams
x= [tex]\frac{21.7}{80}[/tex]
so x = 0.27125
so moles of [tex]N_2O[/tex] formed = 0.27125
mass of [tex]N_2O[/tex] formed = 0.27125 * molar mass of [tex]N_2O[/tex] --- (i)
molar mass of [tex]N_2O[/tex] = 2* 14 +16
=>28+16
=>44 grams
putting the value in equation (i)
mass of [tex]N_2O[/tex] formed = 0.27125 * 44
=>11.935
so mass of [tex]N_2O[/tex] formed = 11.935 grams
To know more about chemical reaction click on below link:
https://brainly.com/question/29039149#
#SPJ4
transition metal ions regulated oxygen evolution reaction performance of ni-based hydroxides hierarchical nanoarrays
True , transition metal ions regulated oxygen evolution reaction performance of ni-based hydroxides hierarchical nanoarrays.
Transition metals are part of the d block, which means that the d sublevel of electrons is being filled with up to ten electrons. Many transition metals are incapable of losing enough electrons to achieve the noble-gas electron configuration. Ions are formed when transition metals lose s electrons. Transition metals produce a variety of ions with varying charges. The electrons in the's' orbital have more energy than the electrons in the 'd' orbital. As a result, removing those two electrons becomes much easier. As a result, the transition metal can easily form ions with a +2 charge.
Learn more about Transition metals here:
https://brainly.com/question/29828769
#SPJ4
in tlc chromatography, the ___represents the stationary phase and the ___ represents the mobile phase.
Silica serves as the stationary phase in tlc chromatography, while liquid serves as the mobile phase.
What is chromatography and how does it work?Separate mixture's constituent parts by chromatography is a method. This mixture gets dissolved in a material known as the mobile phase to start the process, which then transports it through a material known as the stationary phase.
What is the advantage of chromatography?Chromatography enables precise separation, analysis, and purification. Very little sample volume is needed. It works with a variety of materials, including tissue extracts, plastics, food particles, pesticides, medicines, and food particles.
To know more about chromatography visit:
brainly.com/question/14250736
#SPJ4
which of the following must be used to protect dental personnel from the occupational risks of nitrous oxide by reducing the n2o released into the treatment room?
For more than 150 years, nitrous oxide has been used as a clinical anesthetic. When combined with an anesthetic gas scavenging system, an efficient room heating, ventilation, and air conditioning system.
This Alert provides control strategies for preventing or significantly reducing N2O exposure during anesthetic gas administration. The danger of anesthetic toxicity has been proven to be decreased by epinephrine's ability to prolong sensory nerve blockage and delay local anesthetics' absorption into the body. In some circumstances, additions like tramadol, buprenorphine, dexamethasone, and clonidine seem to work well. N2O is employed as an anesthetic agent* in veterinary, medical, and dental operating rooms. Additionally, this gas is used to nitrate alkali metals, oxidize organic molecules, and foam whipped cream.
to know more about nitrous oxide please visit.
https://brainly.com/question/9835041
#SPJ4
ernest develops a about the structure of the atom, starting from the idea that all atoms are made from different numbers of two particles, a heavy positively-charged one and a light negatively-charged one. by using this idea ernest is able to explain the results of many different experiments on atoms.
Ernest Rutherford model :- Rutherford directed the Geiger-Marsden experiment in 1909 which suggested upon Rutherford's 1911 analysis , that Thomsan' plum pudding model of the atom was incorrect.
Rutherford's new model for atoms based on the experimental results ,contained new features of relatively high central charge concentrated into a very small volume un comprision to rest of the atom and with this central volume also containing the bulk of atomic mass of the atom. This region would be known as nucleus.
Rutherford's experiment:- A famous experiment "gold foil experiment" in which Rutherford observed that the the atom has a tiny and heavy nucleus. He designed an experiment to use the alpha particles emitted by radioactive element. He saw that most of the beams went straight through the foil but a few were deflected.
Rutherford propose his own physical model for sub atomic structure on the basis of his experimental observation. In this, the atom is made up of a central charge surrounded by cloud of orbiting electrons. Later the region of Central charge names as nucleus. Rutherford didn't use the word nucleus.
After Rutherford's discovery scientists started to realise that the atom is not a single particle, but it is made up of far smaller subatomic particles. Scientists eventually discovered that atoms have positively charged nucleus in the center. Later scientists also found expected number of electrons in atom by using x-ray.
Learn more about atom here:
https://brainly.com/question/6258301
#SPJ4
Use the following list of reagents and conditions to efficiently synthesize the product on the right from the starting material on the left. a Br2, FeBr3 b [1] LIAIH4, [2] H20 c (CH3)2NH, DCC d PCC e NaCN, HCI f (CH3)2NH, NaBH3CN g H2, Pd-C h NaNO2, HCI i Cul j CuCN k H2PO2 l HBF4
We use regent DCC and [tex](CH_3)_2NH[/tex]
As per the details share in the above question are as follow,
Following are the list of reagents and conditions to efficiently synthesize.
To convert,
cyclopentand to cyclopentylamine.
cyclopentand the chemical formula [tex]C_5H_{10}[/tex] and CAS number 287-92, cyclopentane is a very combustible alicyclic hydrocarbon that is made up of a ring of five carbon atoms that are each connected to two hydrogen atoms above and below the plane. It appears as an odourless liquid with a hue similar to petrol.
cyclopentylamine
We have to oxidation the PCC.
First we have to convert cyclopentanol to cyclopentanone.
Hence we use the regent d and c .
For more such question on efficiently synthesize.
https://brainly.com/question/29559115
#SPJ4
Note : Question will be ,Use the following list of reagents and conditions to efficiently synthesize the product on the right from the starting material on the left. a Br2, FeBr3 b [1] LIAIH4, [2] H20 c (CH3)2NH, DCC d PCC e NaCN, HCI f (CH3)2NH, NaBH3CN g H2, Pd-C h NaNO2, HCI i Cul j CuCN k H2PO2 l HBF4
Enter your answer as a list of steps separated by semicolons, for example: a;b;c
A 14.585 g sample of CaCl2 was added to 12.283 g of K2CO3 and mixed in water. A 3.573 g yield of CaCO3 was obtained.
(1) What is the limiting reagent?
(2) Calculate the percent yield of CaCO3.
A 14.585 g sample of CaCl2 was added to 12.283 g of K2CO3 and mixed in water. A 3.573 g yield of CaCO3 was obtained., Limiting reagent is K2CO3,percent yield of CaCO3 = 40.20 %
molar mass of CaCO3 = 100.0869 g/mol ,then 0.0888 mole = 0.0888 \times 100.0869 = 8.8877 gm. 8.8877 of CaCO3 is theoritical yield = 100% yield then 3.573 gm =3.573 \times 100 /8.8877 = 40.20 %,percent yield of CaCO3 = 40.20 %. Limiting reagents are drugs that are totally engulfed when a chemical reaction is completed. They are also recognised as limiting reactants or limiting agents. A set sum of reagents is needed for the finalisation of a chemical reaction, according to stoichiometry. Excess reagents are limiting reactant that aren't absorbed when a chemical reaction is finished. The limiting reagent is the reactant that has totally used up or responded since its quantity restricts the number of products formed.
Learn more about Limiting reagents here:
https://brainly.com/question/11848702
#SPJ4
Problems:
Show all three steps of using a formula - show the formula, fill in the formula, 8 solve for the answer.
22) Calculate the energy of a photon of radiation with a frequency of 9.50 x 10¹³ Hz.
HINT:
You can make the formula parts larger by dragging them to the size that you prefer. DELETE THIS BOX AFTER READING!
HINT:
To make a superscript, cntrl / cmmd. (period)
The energy of a photon of radiation with a frequency of 9.50 × 10¹³ Hz is 6.3 × 10⁻²⁰ J.
The Energy that comes from electromagnetic radiation is quantized, It exists in the form of small energy packets known as photons.
The energy of a photon is depends on the frequency at which it propagates from radiation source.
We can calculate the energy of a photon by the equation given below:
E = hν
where, E is the energy of photon
h is Plancks's constant whose value is 6.626 × 10⁻³⁴ Js
ν is the frequency of the radiation.
According to the question,
given,
frequency ν = 9.50 × 10¹³ Hz
therefore,
E = 6.626 × 10⁻³⁴ Js × 9.50 × 10¹³ Hz (∵1 Hz = 1s⁻¹)
E = 6.2947 × 10⁻²⁰ J
E≈ 6.3 × 10⁻²⁰ J
Thus, energy of the photon is 6.3 × 10⁻²⁰ J
To know more about energy of photon here
brainly.com/question/25746629
#SPJ4
which of the following are examples of colligative properties. freezing point elevation increases vapor pressure increases osmotic pressure boiling point elevation
The correct option is C Osmotic pressure
Only Osmotic pressure is a colligative property.
What is Osmotic pressure?
Osmosis is the process by which water moves from a region with a low concentration of solute to one with a greater concentration. Atoms, ions, or molecules dissolved in a liquid are known as solutes. The total amount of particles dissolved in the fluid determines the rate of osmosis. The rate of osmosis increases with the number of particles that dissolve.
Water will go to the region with the highest solute concentration if a membrane is present. The pressure produced by water across a membrane as a result of osmosis is known as osmotic pressure. The osmotic pressure rises in direct proportion to the amount of water crossing the membrane.
Learn more about Osmotic pressure from given link
https://brainly.com/question/25904085
#SPJ4
commercial antacids contain a wide variety of basic substances as their active ingredient, including .
Commercial antacids contain a wide variety of basic substances as their active ingredient, including calcium, magnesium, and aluminium salts.
What are Antacids?
Antacids are medications that counteract (neutralise) your stomach's acid to ease heartburn and indigestion. They are available without a prescription from pharmacies and stores and come in liquid or chewable tablet form. Gel composed of aluminium hydroxide is an example of an antacid.
What should you take as a natural antacid?
A natural antacid is baking soda, sometimes referred to as sodium bicarbonate. A teaspoon of baking soda dissolved in 8 ounces of water can be consumed to briefly reduce heartburn and neutralise stomach acid.
To know more about antacids, click here- brainly.com/question/5328009
#SPJ1
Commercial antacids contain a wide variety of basic substances as their active ingredient, including calcium, magnesium, and aluminium salts.
What are Antacids?Antacids are medications that counteract (neutralise) your stomach's acid to ease heartburn and indigestion. They are available without a prescription from pharmacies and stores and come in liquid or chewable tablet form. Gel composed of aluminium hydroxide is an example of an antacid.
What should you take as a natural antacid?A natural antacid is baking soda, sometimes referred to as sodium bicarbonate. A teaspoon of baking soda dissolved in 8 ounces of water can be consumed to briefly reduce heartburn and neutralise stomach acid.
To know more about antacids, click here-
brainly.com/question/5328009
#SPJ1
Separate samples of an unknown aqueous solution are mixed with solutions of HBr(aq) H_2SO_2(aq). and NaOH(aq). A solid precipitate forms in all three cases. Which of the following cations could the unknown solution contain?
Previous question
Double displacement response will shape a precipitate if the only of the goods is insoluble in water.
The solubility guidelines offer a listing of cations and anions that if blended the ensuing compound is both soluble or insoluble. The response equations between K+ and the 3 answers are given below.
HBr(aq)+K+(aq)→KBr(aq)+H+H2SO4(aq)+2K+(aq)→K2SO4(aq)+2H+NaOH(aq)+K+(aq)→KOH(aq)+Na+The response between Pb2+ and the 3 answers are given below.2HBr(aq)+Pb2+(aq)→PbBr2(s)+2H+H2SO4(aq)+Pb2+(aq)→PbSO4(s)+2H+2NaOH(aq)+Pb2+(aq)→Pb(OH)2(s)+2Na+The response between Ba2+ and the 3 answers are given below.2HBr(aq)+Ba2+(aq)→BaBr2(aq)+2H+H2SO4(aq)+Ba2+(aq)→BaSO4(s)+2H+2NaOH(aq)+Ba2+(aq)→Ba(OH)2(aq)+2Na+From the solubility guidelines, all the goods fashioned withinside the answer containing Pb2+ are insoluble, a precipitate will shape in all 3 cases.Read more about solutions;
https://brainly.com/question/25326161
#SPJ4
please answer both of these answers correctly I am putting this on 100 points because I'm rich and it's the holidays (the two questions are separate)
There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, there is a large difference between (β −) decay and (β +) decay.
What is nuclear decay?Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.
A neutron decays into a proton in beta minus (β −) , an electron and an electron antineutrino are produced. A proton decays into a neutron in beta plus (β +) , a positron and an electron neutrino are produced. Positron emission is another name for the β + decay.
Therefore, there is a large difference between (β −) decay and (β +) decay.
To know more about nuclear decay, here:
https://brainly.com/question/21114779
#SPJ1