e) if the ph of the solution in the above problem is adjusted to 3.86 by the addition of concentrated naoh, what will be the concentration of lactate and lactic acid at equilibrium?

According to the given data, the value of ln(Pch3nc) at time 8000 seconds is 4.56.

To find the value of ln(Pch3nc) at 8000 seconds, we need to look at the second column of the raw data table which corresponds to the pressure values of CH3NC at different times. We see that at 8000 seconds, the pressure value of CH3NC is 96.2 Torr.

Next, we need to take the natural logarithm of this pressure value, which gives us ln(96.2) = 4.56. Therefore, the value of ln(Pch3nc) at 8000 seconds is 4.56.

In this experiment, the natural logarithm of the pressure values of CH3NC were plotted against time to determine that the reaction was first-order. The line of best fit through the data points provided the equation y = -(0.000215)x + 6.02, where the slope (m) was equal to the rate constant (k) of the reaction.

To know more about line of best fit:

https://brainly.com/question/14279419

#SPJ4

The equilibrium constant for this reaction is 0.741. To calculate the equilibrium constant, Kc, we first need to write the balanced chemical equation for the reaction: CH₃COOH +C₂H₅OH ⇌ CH₃COOC₂H₅ + H₂O

The coefficients in the equation tell us that one mole of CH₃COOH reacts with one mole of C₂H₅OH to form one mole of CH₃COOC₂H₅ and one mole of H₂O. We can also see that the reaction involves the transfer of a proton from CH₃COOH toC₂H₅OH, forming the products.

Next, we need to set up an ICE table to determine the equilibrium concentrations of each species. ICE stands for Initial, Change, and Equilibrium, and it helps us organize the information we have about the reaction. Here is the table:

|        | CH₃COOH | C₂H₅OH | CH₃COOC₂H₅ | H₂O   |
|--------|---------|--------|-------------|-------|
| Initial | 6 g     | 4.6 g  | 0 g         | 0 g   |
| Change  | -2 g    | -2 g   | +2 g        | +2 g  |
| Equil.  | 4 g     | 2.6 g  | 2 g         | 2 g   |

Note that we subtracted 2 g from the initial amount of CH₃COOH and C₂H₅OH, since we know that 2 g of acid was unused at equilibrium. We also added 2 g to the amounts of CH₃COOC₂H₅ and H₂O, since these are the products of the reaction.

Now we can calculate the equilibrium concentrations of each species in moles per liter (M):

[CH₃COOH] = 4 g / 60.05 g/mol / 1 L = 0.0666 M
[C₂H₅OH] = 2.6 g / 46.07 g/mol / 1 L = 0.0564 M
[CH₃COOC₂H₅] = 2 g / 88.11 g/mol / 1 L = 0.0227 M
[H₂O] = 2 g / 18.02 g/mol / 1 L = 0.111 M

Finally, we can plug these concentrations into the expression for Kc:

Kc = [CH₃COOC₂H₅][H₂O] / ([CH₃COOH][C₂H₅OH])

Kc = (0.0227)(0.111) / (0.0666)(0.0564)

Kc = 0.741

Therefore, the equilibrium constant for this reaction is 0.741.

To know more about equilibrium constant, refer

https://brainly.com/question/19340344

#SPJ11

To calculate the molecular weight of this molecule, However, we can tell you that the sum of the atomic weights of the elements in a molecule is called its molecular weight.

In this case, the molecular weight would be the sum of the atomic weights of carbon, nitrogen, and hydrogen in the molecule.The correct amu for carbon, nitrogen, and hydrogen are 12 amu, 14 amu, and 1 amu, respectively.

To find the molecular weight of a molecule that includes one atom of each element, simply add their respective amu values together: 12 amu (carbon) + 14 amu (nitrogen) + 1 amu (hydrogen) = 27 amu. The molecular weight of this molecule is 27 amu.

To know more about hydrogen click here

brainly.com/question/30037191

#SPJ11

To determine the molecular weight of the molecule, we need to know the formula of the molecule. However, based on the information given, we can make an educated guess that the molecule is likely to be a combination of carbon, nitrogen, and hydrogen atoms.

Assuming that the molecule has the formula CHN, we can calculate its molecular weight as follows:

Molecular weight of CHN = (mass of carbon x number of carbon atoms) + (mass of hydrogen x number of hydrogen atoms) + (mass of nitrogen x number of nitrogen atoms)
                         = (12 amu x 1) + (1 amu x 1) + (16 amu x 1)
                         = 12 amu + 1 amu + 16 amu
                         = 29 amu

Therefore, the molecular weight of the molecule with carbon, nitrogen, and hydrogen atoms having masses of 12 amu, 16 amu, and 1 amu, respectively, is 29 amu.

To know more about Molecular weight of CHN:

https://brainly.com/question/28297551

#SPJ11

Utilizing several well pads can drastically minimize the quantity of well pads, access roads, pipeline routes, and production facilities, decreasing habitat disruption, negative effects on the general population, and the environmental footprint overall.

For more information on technological advancement in environment safety kindly visit to

https://brainly.com/question/19696207

#SPJ1

The correct statements about Schrodinger's model of the atom are option A and B: The orbitals within a sublevel have the same energies, and the number of lobes of an orbital depends on these sublevels.

In order to explain the energies of electrons in atoms and information on the shape and orientations of the most likely distribution of electrons around the nucleus, a set of values obtained from the solution of the Schrodinger equation is used to construct an orbital.

Quantum numbers are the ones in question. Principle (n), azimuthal (l), and magnetic (m) quantum numbers are the three distinct sets of quantum numbers that make up an orbital. The fourth quantum number is known as spin quantum number (s) which usually denotes the orientation of an electron inside an orbital. The values for this quantum number can either be +1/2 or -1/2.

To know more about the Schrodinger's model, refer:

https://brainly.com/question/11032278

#SPJ4

Complete question is:

Select all the options that correctly describe the sublevel when referring to the Schrodinger's model of the atom.

A. The orbitals within a sublevel at a given principal energy level have the same energies. For example px has the same energy as py.

B. The number of lobes of an orbital depends on the sublevel of the orbital.

C. The relative energies of the sublevels s, p, d, and f are (lowest energy) f < d < p < s (highest energy).

D. The number of sublevels in each principal energy level is the same.

Methylene Blue Active Substance (MBAS) is a test to identify: c. presence of detergents containing phosphates

Also known by the name methylthioninium chloride, MBAS is an indicator dye and drug used for pharmaceutical purposes. The medical purpose is seen in the medical condition of methemoglobinemia. It is the condition of reduced capability of haemoglobin to carry the oxygen.

Methylene blue active substance are used as standard method to recognise the anionic surfactants with enhanced sensitivity. The cationic methylene blue couples with anionic surfactants such as phosphates to indicate the results.

Learn more about indicator dye -

https://brainly.com/question/31212744

#SPJ4

There are 9.58 x 10^20 Cl atoms. The correct answer is D).

To determine the number of Cl atoms in 0.0728 g of PCl3, we need to use the molar mass of PCl3 and Avogadro's number. The molar mass of PCl3 is 137.33 g/mol, which means that one mole of PCl3 contains 3 moles of Cl atoms. Therefore, the number of moles of PCl3 in 0.0728 g is:

0.0728 g / 137.33 g/mol = 0.00053 mol

Since one mole of PCl3 contains 3 moles of Cl atoms, the number of moles of Cl atoms in 0.00053 mol of PCl3 is:

0.00053 mol x 3 = 0.00159 mol

Finally, we can use Avogadro's number (6.022 x 10^23) to convert moles to atoms:

0.00159 mol x 6.022 x 10^23 atoms/mol = 9.58 x 10^20 Cl atoms

To learn more about Atoms :

https://brainly.com/question/30703995

#SPJ11

Option D is the correct answer: a double suction centrifugal pump with two impellers.

Two suction apertures and two impellers are installed on a shared shaft in double suction centrifugal pumps. These pumps have high flow rates and are frequently employed in applications that require huge amounts of water to be moved at low pressures.

Because of their design, double suction pumps are less prone to cavitation than single suction pumps, making them an excellent choice for applications with restricted net positive suction head (NPSH). The pump's two impellers allow it to provide twice the flow rate of a single-suction centrifugal pump of comparable size and speed.

To know more about centrifugal pumps, visit,

https://brainly.com/question/28830866

#SPJ4

High concentrations of nitrates in drinking water are" is option d) a possible cause of methemoglobinemia.

High concentrations of nitrates in drinking water are a possible cause of methemoglobinemia.

Methemoglobinemia is a blood disorder that reduces the amount of oxygen that can be carried in the blood. It can be caused by exposure to certain chemicals, including nitrates.

Infants are particularly susceptible to methemoglobinemia because their bodies are less able to convert methemoglobin back to hemoglobin.

Nitrates can enter drinking water from a variety of sources, including agricultural fertilizers, septic systems, and sewage treatment plants.

High levels of nitrates in drinking water can lead to methemoglobinemia in infants, as well as in adults with certain medical conditions.

The important to monitor the nitrate levels in drinking water and take appropriate measures to reduce exposure if levels are found to be high.

Therefore, the correct answer to the question "High concentrations of nitrates in drinking water are" is option d) a possible cause of methemoglobinemia.

Learn more about concentrations

brainly.com/question/10725862

#SPJ11

Answer:

d

Explanation:

Yes, that's correct. When a beta particle is emitted from an atomic nucleus, the mass number of the isotope (i.e., the total number of protons and neutrons in the nucleus) remains the same.

This is because a beta particle is essentially an electron that is emitted from the nucleus during the process of beta decay, which involves the conversion of a neutron into a proton and an electron. Since the electron has negligible mass compared to the proton and neutron, the overall mass of the nucleus remains essentially unchanged. However, the atomic number (i.e., the number of protons in the nucleus) increases by one during beta decay, since a neutron has been converted into a proton. Beta decay is a type of radioactive decay that occurs when a nucleus has an excess of neutrons relative to protons, which can destabilize the nucleus. There are two types of beta decay: beta-minus decay (in which a neutron is converted into a proton and an electron is emitted) and beta-plus decay (in which a proton is converted into a neutron and a positron is emitted). The emission of a beta particle does not change the charge of the nucleus, but it does change the atomic number of the nucleus. This means that the identity of the element is changed during beta decay. Beta decay can be used in a variety of applications, such as in nuclear medicine for imaging and therapy, in carbon dating to determine the age of archaeological artifacts, and in nuclear power generation to produce electricity. Beta decay is one of the key processes that occurs in the Sun and other stars, where it is responsible for the conversion of hydrogen into helium and the release of energy through nuclear fusion.

Learn more about radioactive decay here:

https://brainly.com/question/1770619

#SPJ11

Since the process is isentropic, the entropy remains constant. Therefore, we can use the isentropic relation T2 T1   P2 P1   γ 1 γwhere γ is the specific heat ratio, which for methane is approximately 1.3. Since the process is at constant pressure, we can also use the ideal gas law.

P1V1 = P2V2Since the methane is assumed to be incompressible; we can assume that V1 = V2. Combining these equations, we get.T2T1  P1 P2 1.3 1.3   P1 P2 0 154 P1 P2  1, since the volume remains constant. Therefore, we have T2 T1   1This means that the temperature remains constant at 120 K, and the temperature change is 0 K. Therefore, the correct answer is 0 K. Liquid methane is commonly used in various cryogenic applications. The critical temperature of methane is 191 K (or 82 degree C), and thus methane must be maintained below 191 K to keep it in liquid phase. Determine the entropy change of liquid methane as it undergoes a process from 110 K and 1 MPa to 120 K and 5 MPa using tabulated properties and approximating liquid methane as an incompressible substance.

learn more about methane here.

https://brainly.com/question/2127750

#SPJ11

Many nucleophilic addition reactions of aldehydes and ketones are catalyzed by acid or base. Acids catalyze hydration by facilitating the formation of a protonated carbonyl group.

which is more susceptible to nucleophilic attack. This results in the formation of an intermediate hemiacetal, which can then be further protonated and attacked by another nucleophile to form a fully substituted acetal. Overall, acid catalysis enhances the reactivity of the carbonyl group towards nucleophilic addition reactions.

Acids catalyze hydration by protonating the carbonyl oxygen, making it more electrophilic and susceptible to nucleophilic attack. This leads to the formation of a tetrahedral intermediate, which then undergoes proton transfer to generate the final hydrated product.

To know more about reaction click here

brainly.com/question/30564957

#SPJ11

The acid catalyst can be either a strong mineral acid, such as sulfuric acid or hydrochloric acid, or a weaker organic acid, such as acetic acid or formic acid.

Acids catalyze the nucleophilic addition reactions of aldehydes and ketones by donating a proton (H+) to the carbonyl oxygen, making it more electrophilic and enhancing the nucleophilic attack by the incoming nucleophile.

In the case of hydration, acid catalysis involves the addition of water to the carbonyl group of an aldehyde or ketone to form a hydrate, which is then converted back to the original carbonyl compound through deprotonation or elimination of water.

The acid catalyst provides a proton to the carbonyl oxygen, facilitating the nucleophilic attack by water and making the carbonyl carbon more electrophilic.

The overall reaction can be represented as:

RCHO + H2O → RCH(OH)OH

to know more about nucleophilic addition reactions refer here:

https://brainly.com/question/4699407#

#SPJ11

When reactants are mixed and heated in an esterification reaction, a liquid product is formed along with other byproducts.

When reactants are mixed and heated in an esterification reaction, a liquid product is formed along with other byproducts. Esterification is a chemical reaction between an alcohol and a carboxylic acid, often catalyzed by an acid catalyst such as sulfuric acid. The reaction produces an ester and water as byproducts.

During the reaction, the alcohol and carboxylic acid are mixed together and heated. The acid catalyst is added to speed up the reaction. As the reaction proceeds, the ester and water are formed. The ester is a liquid, while water is a gas at the reaction temperature.

The liquid product that collects in the side of the apparatus is the ester that is being produced. This liquid can be separated from the reaction mixture and purified using various techniques, such as distillation or extraction. The byproduct water can also be removed by distillation or other means. The ester that is produced can have a wide range of applications, such as in the production of perfumes, flavorings, and plastics.

Visit to know more about Esterification:-

brainly.com/question/28118164

#SPJ11

The answer is d. Ozone can be formed as a result of the sun's action on nitrogen oxides and hydrocarbons. This is known as photochemical smog.

A type of smog called photochemical smog is created when UV radiation from the sun and atmospheric nitrogen oxides interact. The morning and afternoon hours are when this is most noticeable as a brown haze, especially in warm, densely populated places.

When sunlight reacts with nitrogen oxides, together with at least one other volatile organic compound (VOC) that is present in the atmosphere, photochemical smog is created.

Therefore, the concentration of secondary pollutants is what causes the process that results in photochemical smog and acid rain.

Due to the concentration of secondary pollutants, photochemical haze and acid rain are produced.

Learn more about photochemical smog here

https://brainly.com/question/27960448

#SPJ11

Pairs of valence electrons that are not shared between atoms are called b. unshared pairs

Unshared pairs, also known as lone pairs or nonbonding electron pairs, these unshared pairs play a significant role in determining the shape of molecules and the reactivity of atoms in chemical reactions. In contrast, shared electron pairs participate in covalent bonding, which involves the sharing of electrons between two atoms to create a stable electron configuration.

Covalent bonding results in the formation of molecules with varying properties depending on the atoms involved and the number of electron pairs shared. There can be single, double, or triple covalent bonds depending on how many pairs of electrons are being shared. Stable electron configurations are achieved when atoms reach the desired eight electrons in their outermost shell, adhering to the octet rule. In summary, unshared pairs refer to valence electrons that do not participate in bonding, while shared electron pairs contribute to covalent bonding, allowing atoms to achieve stable electron configurations. Pairs of valence electrons that are not shared between atoms are called b. unshared pairs

learn more about covalent bonding here:

https://brainly.com/question/29266368

#SPJ11

The fact that solar systems only generate electricity during the day is typically not a problem because demand for electricity is often highest during the day, which coincides with when solar panels are producing electricity.

During daytime hours, people are usually awake and more active, using appliances, electronics, and other devices that require electricity. Solar systems can help meet this increased demand by producing electricity when it's needed most.

Additionally, many photovoltaic cells continue to generate electricity through the night due to stored energy. Furthermore, solar systems are often located in deserts, which have high levels of sunlight, and currently do not produce much electricity on a global scale.

Finally, the electricity generated during the day can also be used to power Stirling engines, which can convert heat into mechanical energy and then into electricity.
To know more about solar systems:

https://brainly.com/question/10940582

#SPJ11

The fact that solar systems only generate electricity during the day is typically not a problem because the demand for electricity is often highest during the day.

Additionally, advancements in photovoltaic cell technology have allowed many cells to continue generating electricity through the night. Moreover, the electricity generated by solar systems can also be used to power Stirling engines, which can convert heat energy into mechanical energy. While it is true that solar systems are often located in deserts, this is not the only reason why the daytime generation of electricity is not a problem. Furthermore, while solar energy currently only produces a small fraction of the world's electricity, its usage is growing rapidly, and it is expected to play a significant role in meeting future energy demands.

To learn more about the photovoltaic cell, refer:-

https://brainly.com/question/30321901

#SPJ11

Thus, for the titration of KOH and HCl, phenolphthalein indicator is used.

Potassium hydroxide, an inorganic substance also known as caustic potash or lye and used to manufacture soap and cleaning solutions, is combined with pure water to create Koh's Universal Surface Cleaner.

Potassium hydroxide isn't an acid; on the contrary, it is a base or an alkaline substance. However because of its ionic connections and crystalline structure, potassium hydroxide is actually a salt when it is pure solid anhydrous.

To know more about KOH visit:

https://brainly.com/question/7949561

#SPJ1

As a result, the reaction's enthalpy change is +1340 kJ/mol.

The standard enthalpy change of formation is calculated by subtracting the sum of the standard enthalpies of formation of the reactants and products from the total of the standard enthalpies of formation of the reactants. as well as the usual numbers for the enthalpy of formation: Hfo[A] = 433 KJ/mol. Hfo[B] equals -256 KJ/mol.

To calculate the enthalpy change for the given reaction, we can use Hess's Law and add the enthalpy changes for the two given reactions:

Reaction 1: Ethane gas + Oxygen gas → Carbon dioxide gas + Water vapor; Heat of reaction = -3120 kJ/mol

Reaction 2: Methane gas + Oxygen gas → Carbon dioxide gas + Water vapor; Heat of reaction = -890 kJ/mol

Multiplying Reaction 2 by 2 to balance the oxygen, we get:

2 Methane gas + 4 Oxygen gas → 2 Carbon dioxide gas + 4 Water vapor; Heat of reaction = -1780 kJ/mol

Now, we can reverse Reaction 1 and multiply by 1/2 to get the desired reaction:

1/2 (4 Carbon dioxide gas + 6 Water vapor → 2 Ethane gas + 7 Oxygen gas); Heat of reaction = +3120 kJ/mol

Adding the enthalpy changes for the two reactions, we get:

Heat of reaction for the given reaction = Heat of Reaction 2 x 2 + Heat of Reaction 3

Heat of reaction = -1780 kJ/mol + 3120 kJ/mol

Heat of reaction = +1340 kJ/mol

To know more about reaction's visit:-

https://brainly.com/question/28984750

#SPJ1

When elements chemically combine, the resulting compound has (b) different properties from the uncombined elements. This is due to the formation of new chemical bonds that result in a unique arrangement of atoms with different physical and chemical properties than the individual elements.

The compound will have a distinct set of physical and chemical properties, such as melting and boiling points, solubility, reactivity, and density, that differ from those of its component elements. The ratio of atoms in a compound is fixed and can be expressed by a chemical formula, which reflects the unique arrangement of atoms within the compound.

Thus, the combination of elements leads to the formation of a new substance with its own unique set of properties that distinguish it from the original elements.

To know more about the resulting compound refer here :

https://brainly.com/question/1194985#

#SPJ11

The Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.988 atm pressure is approximately 25.2 K.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It determines the direction of heat transfer, which is the flow of thermal energy between objects or systems due to a temperature difference.

To determine the Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.988 atm pressure, we can use the ideal gas law equation:

PV = nRT

where:

P = pressure of the gas (in atm)

V = volume of the gas (in liters)

n = amount of gas (in moles)

R = ideal gas constant (0.0821 L atm / (mol K))

T = temperature of the gas (in Kelvin)

Rearranging the equation to solve for temperature (T), we get:

T = PV / (nR)

Now we can plug in the given values:

P = 0.988 atm

V = 1.20 L

n = 0.0470 mol

R = 0.0821 L atm / (mol K)

Substituting these values into the equation, we get:

T = (0.988 atm) * (1.20 L) / (0.0470 mol * 0.0821 L atm / (mol K))

T = 25.2 K

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

Answer:

The true statement is: "There is more energy in steam at 100°C than water at 100ºC."

This is because steam at 100°C has more thermal energy than water at 100ºC because it has undergone a phase change from liquid to gas, which requires additional energy.

The other statements are not true:

   To condense steam, the temperature must increase, not decrease. Condensation is the process by which a gas (steam) changes phase to a liquid, and this requires the removal of energy, usually through cooling.

   To melt ice, the temperature must increase. Melting is the process by which a solid (ice) changes phase to a liquid, and this requires the addition of energy, usually through heating.

   Iron can exist in all three states of matter (solid, liquid, and gas) depending on the temperature and pressure. However, at room temperature and standard atmospheric pressure, iron is a solid.

Explanation:

Increased outside air-exchange would not worsen the indoor air pollution problem.  Therefore, the correct answer is B.

Indoor air pollution is a major concern for public health, as people spend most of their time indoors. Indoor air pollution can be caused by a variety of factors, including outdoor air pollution, building materials, furnishings, and household products, as well as activities such as cooking and smoking.

One way to improve indoor air quality is to increase the outside air-exchange rate, which is the rate at which outdoor air replaces indoor air. This can be achieved by opening windows or doors, using ventilation systems, or installing air purifiers. Increasing the outside air-exchange rate can help to dilute indoor pollutants and improve indoor air quality.

Magnetically sealed doors, triple-glazed windows, and thick insulation are all designed to improve the energy efficiency of buildings by reducing the exchange of air between the inside and outside. While these measures can help to reduce energy consumption and lower heating and cooling costs, they can also contribute to indoor air pollution by trapping pollutants indoors.

Therefore, the correct answer to the question is B, because increasing outside air-exchange would actually help to improve indoor air quality, rather than worsen the problem.

Visit to know more about Indoor air pollution:-

brainly.com/question/14518398

#SPJ11

A chemical reaction that occurs under a given set of conditions is called a specific reaction.

A specific reaction refers to a chemical reaction that occurs under certain given conditions, such as temperature, pressure, and the presence of specific reactants or catalysts. The conditions required for a specific reaction can vary widely depending on the nature of the reactants and products involved.

In chemistry, specific reactions are often studied in relation to the reaction kinetics, or the rate at which the reaction occurs. The rate of a specific reaction can be affected by a number of factors, including the concentration of the reactants, the temperature and pressure of the reaction environment, and the presence of catalysts or inhibitors.

Specific reactions can also be classified into different types based on the nature of the reactants and products. For example, a combustion reaction involves the rapid oxidation of a fuel, typically with the production of heat and light, while a precipitation reaction involves the formation of a solid precipitate when two aqueous solutions are combined.

Understanding specific reactions is an important part of many areas of chemistry, including materials science, pharmaceuticals, and environmental science. By studying the conditions required for specific reactions, scientists can develop new materials, drugs, and technologies that can be used to address a wide range of practical problems.

To know more about environmental

brainly.com/question/21976584

#SPJ11

True. Overripe fruits like pears produce ethylene gas, a plant hormone that triggers the ripening process in other fruits. If an overripe pear is stored with other good pears, it will release ethylene gas, which will accelerate the ripening process of the other fruits, causing them to become overripe and spoil quickly.

The prevent this from happening, it's best to store overripe fruits separately from other fruits or to consume them as soon as possible. You can also slow down the ripening process of fruits by storing them in a cool and dry place or in the refrigerator.

This effect can be particularly noticeable in closed spaces like paper bags, where the concentration of ethylene gas can build up and cause even faster ripening and spoilage.

For more such questions on refrigerator

https://brainly.com/question/30158843

#SPJ11

Answer:

Melting

Explanation:

The phase change from a solid to a liquid is called melting, also known as fusion. During this phase change, the substance absorbs heat energy, which causes the particles in the solid to vibrate more and overcome the attractive forces holding them in a fixed position. As a result, the particles gain enough energy to break their bonds and move freely, causing the solid to become a liquid. The temperature at which this phase change occurs is known as the melting point, and it varies depending on the substance.

The mass of the aluminum cube is 72.9 g.

The following formula can be used to determine the cube's volume;

V = a³

where a will be the length of the edge of the cube.

In this case, a = 3.0 cm, so we have:

V = 3.0 cm × 3.0 cm × 3.0 cm

V = 27.0 cm³

The formula of density can be used to get the cube's mass;

ρ = m/V

where ρ will be the density, m will be the mass, and V will be the volume.

In this case, the density of aluminum is given as 2.7 g/cm³, so we have:

2.7 g/cm³ = m/27.0 cm³

Solving for m, we get;

m = 2.7 g/cm³ × 27.0 cm³

m = 72.9 g

To know more about density here

https://brainly.com/question/29775886

#SPJ4

The molecular state of hypochlorous acid is the desired product from chlorination of pool waters. The product:
d. is 62 percent molecular at pH of 7.2

Hypochlorous acid is a weak acid that dissociates into hypochlorite ions at higher pH levels. Therefore, in order to maintain the desired molecular state of hypochlorous acid, it is important to monitor and adjust the pH levels in pool waters. Chlorination refers to the process of adding chlorine compounds to pool water to disinfect it and eliminate harmful bacteria and viruses. Hypochlorous acid is one of the most effective disinfectants produced during this process. It is a weak acid, which means it partially ionizes in water and has a pH-dependent equilibrium between its molecular and ionic forms. At a neutral pH of 7.2, HOCl is 62% molecular, and 38% ionized (as the chloride anion, Cl−).

To learn more about Hypochlorous acid click here https://brainly.com/question/16984896

#SPJ11