Answer:
0.74
Explanation:
this is the correct answer. I followed a correct answer that had the same probelm with different values, swithxed it with mine, and got 0.75. So its basically 0.74
50 POINTS!!!
When writing a chemical reaction equation, what does the arrow ( ---> ) represent?
A. the reactants are making the products
B. the direction of the chemical equation
C. the chemical reaction cannot be reversed
D. all of the above
The condition or progress of a reaction is represented by reaction arrows. The chemical reaction arrow is a single straight arrow that points from the reactant(s) to the product(s) and by-products, as well as side products.
I think this should help you find the answer more easy!
Answer is D
Relatively slow rates of chemical reaction are associated with which characteristic?
A)
High temperature
B)
Low activation energy
C).
The presence of a catalyst
D)
Strong bonds in reactant molecules
Option D : Strong bonds in reactant molecules
The strong bonds in reactant molecules sometimes needs extra energy to weaken the bond and proceed the reaction. Hence, option D is correct.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of the reactants or decrease in concentration of the reactants or increase in the concentration of the products.
The minimum energy required to overcome the barrier potential of a reaction is called its activation energy. Hence, lower the activation energy higher will be the reaction rate.
High temperature and presence of catalyst also leads to higher rate. Strong bonds in reactants needs higher energy to weaken the intermolecular force. Thus, slower the reaction rate.
Find more on reaction rate:
https://brainly.com/question/8592296
#SPJ6
A base is a substance which neutralizes an acid. Which of these substances is not a base?
A. aqueous ammonia
B. sodium chloride
C. sodium carbonate
D. calcium oxide
Among these, sodium chloride is a substance which is not a base, therefore option (b) is correct.
What do you mean by a base in a chemical reaction?A base is a chemical species that donates electrons, accepts protons, or releases hydroxide (OH-) ions in aqueous solution. A base is a molecule or ion able to accept a hydrogen ion from an acid.
A strong base completely dissociates into its ions in water. Bases react vigorously with acids and organic matter. Bases react in predictable ways with pH indicators.
A base substance is a solution that has a pH level of more than 7. Bases react with acids to form salts which is called neutralization reaction.
Among these since sodium chloride is not a base, hence option(b) is correct.
Learn more about base reaction ,here:
https://brainly.com/question/3069273
#SPJ2
Iron(II) sulfide has a molar mass of 87.91 g/mol. 50 grams of
this substance would contain about 3.011 x 1023 molecules.
TRUE
FALSE
Answer:
true
Explanation:
Answer:
[tex]\boxed {\boxed {\sf False}}[/tex]
Explanation:
We want to know if 50 grams of iron (II) sulfide contains 3.011 * 10²³ molecules. Let's calculated and check.
1. Convert Grams to MolesWe know there are 50 grams of iron (II) sulfide or FeS If we want to convert from grams to moles, we use the molar mass (mass per 1 mole). This is given to us and it is 87.91 grams per mole for this substance. Let's create a ratio.
[tex]\frac {87.91 \ g \ FeS}{ 1 \ mol \ FeS}[/tex]
We want to convert 50 grams of FeS to moles, so we multiply by this value.
[tex]50 \ g \ FeS *\frac {87.91 \ g \ FeS}{ 1 \ mol \ FeS}[/tex]
Flip the ratio so the grams of FeS cancel.
[tex]50 \ g \ FeS *\frac {1 \ mol \ FeS}{ 87.91 \ g \ FeS}[/tex]
[tex]50*\frac {1 \ mol \ FeS}{ 87.91}[/tex]
[tex]\frac {50}{ 87.91} \ mol \ FeS[/tex]
[tex]0.5687635081 \ mol \ FeS[/tex]
2. Convert Moles to Molecules1 mole of any substance contains the same number of particles (atoms, molecules, formula units, etc.). This is Avogadro's Number or 6.022 *10²³. In this case, the particles are molecules of FeS. Create another ratio.
[tex]\frac {6.022 *10^{23} \ molecules \ FeS}{ 1 \ mol \ FeS}[/tex]
We want to convert 0.5687635081 moles of FeS to molecules, so we multiply by this value.
[tex]0.5687635081 \ mol \ FeS*\frac {6.022 *10^{23} \ molecules \ FeS}{ 1 \ mol \ FeS}[/tex]
The units of moles of FeS cancel.
[tex]0.5687635081 *\frac {6.022 *10^{23} \ molecules \ FeS}{ 1 }[/tex]
[tex]0.5687635081 *{6.022 *10^{23} \ molecules \ FeS}[/tex]
[tex]3.42509385*10^{23} \ molecules \ FeS[/tex]
If we round to the thousandth place, the 0 in the tenth thousandth place tells us to leave the 5.
[tex]3.425*10^{23} \ molecules \ FeS[/tex]
50 grams of iron (II) sulfide is approximately 3.425 * 10²³ molecules, not 3.011 *10²³ so the statement is false.
Explain why gases such as the oxygen found in tanks used at hospitals are compressed. Why must care be taken to prevent compressed gases from reaching a high temperature?
Answer:
Large amount of gas can be stored in small container.
Explanation:
They are compressed so that a larger amount of gas can be stored in a smaller container. A greater mass confined to a smaller volume makes transporting and storing of gases easier. Increasing temperature increases pressure, and the cylinders might explode.
The equation below represents the equilibrium state of aqueous phosphoric acid.
H3PO4(aq) ↔ H+(aq) + H2PO4-(aq)
Which of the following is equal to the ionization constant Ka?
A
[H2PO−4][H+][H3PO4]
B
[H+][H3PO4][H2PO4]
C
[H+][H2PO−4][H3PO4]
D
[H3PO4][H+][H2PO−4]
Answer:
.
Explanation:
[tex]K_a=\frac{[H_2PO_4^-][H^+]}{[H_3PO_4]}[/tex]
K, the equilibrium constant, is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses)
[tex]Ka=\frac{[H_2PO_4^- ][H^+]}{H_3PO_4}[/tex] is the equilibrium constant and is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses). Hence, option A is correct.
What is equilibrium?A state of balance between opposing forces or actions.
A number that expresses the relationship between the amounts of products and reactants present at equilibrium in a reversible chemical reaction at a given temperature.
[tex]Ka=\frac{[H_2PO_4^- ][H^+]}{H_3PO_4}[/tex]
K, the equilibrium constant, is equal to products over reactants raised to their coefficients (excluding solids and liquids and only including aqueous and gasses)
Hence, option A is correct.
Learn more about the equilibrium here:
https://brainly.com/question/19671384
#SPJ2
Neptune _____.
is a terrestrial planet
has a nearly horizontal axis
was discovered by mathematical calculations
is the largest planet in the solar system
Answer:
C. Was Discovered by Mathematical calculations
Explanation:
Terrestrial Planets are Inner Planets (Mercury,Venus,Earth,Mars) and Neptune is an ice giant or gas giant, Neptune is also not the largest planet in the solar system, I believe that's Jupiter. I don't know for sure if Neptune has a horizontal axis but my best guess is C. I hope this helps! :^)
How many moles are there in 8.25 x 10^26 molecules of methane (CH4)?
Answer:
i dont know
Explanation:
because i dont know 45
PLS HELP ME WILL GIVE BRAIN THINGYYYYY
Answer:
C, when the ball lands it will have the least amount potential energy.
Explanation:
here is a picture that should help you.
how many moles in 200 grams of Br
Calculate what the specific heat capacity of an unknown metal is if 394)
of heat were released when 15.0 grams of the substance at 96.0°C was
cooled to 28.0°C?
Formula Reminders
q = mCAT
q = mHvap
q = mHfus
1. 4.01 J/gºC
2. 5910 J/g°C
3. 0.387 J/g°C
Answer: The specific heat capacity of an unknown metal is [tex]0.387 J/g^{o}C[/tex].
Explanation:
Given: Heat energy = 394 J
Mass = 15 g
Initial temperature = [tex]96^{o}C[/tex]
Final temperature = [tex]28^{o}C[/tex]
Formula used is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass of substance
C = specific heat capacity
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
Substitute the values into above formula as follows.
[tex]q = m \times C \times (T_{2} - T_{1})\\394 J = 15 g \times C \times (28 - 96)^{o}C\\C = \frac{394 J}{15 g \times (68^{o}C)}\\= \frac{394 J}{1020 g^{o}C}\\= 0.387 J/g^{o}C[/tex]
Thus, we can conclude that the specific heat capacity of an unknown metal is [tex]0.386 J/g^{o}C[/tex].
Define activation energy.Activation energy is Define activation energy.the energy barrier that must be surmounted in order for the reactants to transform into products.the energy difference between the reactants and the products.the energy released by the reactants while transforming into products.the energy released by the products while transforming into reactant
Answer:
the energy barrier that must be surmounted in order for the reactants to transform into products.
Explanation:
When we draw a reaction profile, there is always a hump that is found between the reactants and products. This hump is called the activation energy.
The activation energy of a reaction stands as a sort of barrier between reactants and products which must be surmounted before the reactants are converted into products.
Only reactants that possess the activation energy can be converted from reactants to products.
The number of molecules in 1.00 liter of O2 gas at 56◦C and 821 torr is
1. 1.83 × 1025 molec.
2. 32 molec.
3. 2.24 × 1023 molec.
4. 2.41 × 1022 molec.
5. 4 × 10−2 molec.
Answer:
2. 2.41 x 10^22 molec
Explanation:
Answer:
2. 2.41 x 10^22 molec
Explanation:
the other person said that and i got right on my quiz
Jaclyn's coffee was too hot to drink so she placed the cup in the freezer for 10 minutes. What did Jaclyn know about heat that caused her to take this action?
Answer:
Jaclyn knew that Hot temperatures are cooled when out into a colder area.
Suppose you see a crescent Moon. How do you know if it is waxing or waning?
Answer:
waxing is in the evening and waning is in the morning if you cant see the moon in the evening it is waning if you can see it in the evening it is waxing
which statement is true concerning the Haber Process?
A.
It is a process for the synthesis of nitrogen gas.
B.
It is a process for the synthesis of ammonia.
c.
It is a process for the synthesis of methane.
D.
It is a process for the synthesis of carbon monoxide.
E.
It is a process for the synthesis of carbon dioxide.
Answer: the answer is B The Haber Process is used in the manufacturing of ammonia from nitrogen and hydrogen, and then goes on to explain the reasons for the conditions used in the process. The process combines nitrogen from the air with hydrogen derived mainly from natural gas (methane) into ammonia.
Explanation: Mark as brainliest if it helped!!
A sample of helium has a volume of 3.49 L at 741 mmHg. What would be the volume if the pressure
were changed to 760 mmHg at the same temperature?
show work
P1: 741 mmHg
V1: 3.49 L P1 x V1 / P2= (741 mmHg) (3.49 L) / 760 mmHg = 3.40 L
P2: 760 mmHg
V2: ? L
Consider the following reaction:
4FeS2 + 11O2 → 2Fe2O3 + 8SO2
When 28.42 grams of FeS2 reacts with 5.44 grams of O2, how many grams of SO2 are formed?
What is the limiting reactant?
What is the excess reactant?
I'm begging
How many grams are in 4.00 moles of glucose, C6H120
Answer:
[tex]molar \: mass = (6 \times 12) + (12 \times 1) + 16 \\ = 100 \: g \\ 1 \: mole \: weighs \: 100 \: g \\ 4.00 \: moles \: will \: weigh \: (4 \times 100) \: g \\ = 400 \: g[/tex]
Humans rely on water for
Answer:
almost everything
Explanation:
How much of a 10 M solution is needed to make 1 liter of all solution?
a. 1ml
b. 1000ml
c. 10ml
d. 100ml
Answer:
b is the answer 1000ml
please mark me brainlist
why is Cu+O=2CuO unbalanced
Answer:
because the product of CuO contains 2 molecules so it is unbalanced
Explanation:
to balance it 2Cu+2O=4CuO now it is balanced
What is considered the human body's largest organ?
Answer:
The skin
Explanation:
The skin is the largest organ of the body. The skin and its derivatives (hair, nails, sweat and oil glands) make up the integumentary system. One of the main functions of the skin is protection. It protects the body from external factors such as bacteria, chemicals, and temperature.
help me please this is chemistry
____Na + ____Cl2 ---> ____NaCl
What is the chemical name for F5N3
Answer:
Fluorine azide or triazadienyl fluoride (FN3) is a yellow green gas composed of nitrogen and fluorine with formula FN3. It is counted as an interhalogen compound, as the azide functional group is termed a pseudohalogen. It resembles ClN3, BrN3, and IN3 in this respect.
Explanation:
Answer:
I think it is Fluorine not sure tho
Explanation:
what is the mass of 4 moles of almunium atom
Answer:
108 grams
Explanation:
What is the molarity of a solution made of 2.45 moles of LiCl in 4.75 L of solution?
Answer:
.52 M
Explanation:
moles ÷ liters = molarity
2.45 ÷ 4.75 = 0.5157894737
rounding it = .52
select all that are heterogeneous mixtures.
A) soil
B) steel
C) concrete
D) kool-aid
E) open can of soda
Calculate the molar solubility of aluminum hydroxide (AlOH)3) in a 0.027M solution of aluminum nitrate (Al(NO3)3). The Ksp of AlOH)3 is 2.0x10-32.
Answer:
s = 5.22x10⁻⁹ M
Explanation:
Let's write the equilibrium reaction for this compound:
Al(OH)₃ <-------> Al³⁺ + 3OH⁻ Ksp = 2x10⁻³²
To get the solubility, we need to write the equilibrium expression:
Ksp = [Al³⁺] [OH⁻]³
Al(OH)₃ does not contribute to the equilibrium expression, because is a solid compound. Now, according to this, we have the following:
Al(OH)₃ <-------> Al³⁺ + 3OH⁻
I. 0 0
E. s 3s
Replacing into the Ksp expression:
2x10⁻³² = (s) (3s)³
2x10⁻³² = s * 27s³
2x10⁻³² = 27s⁴
s = ⁴√2x10⁻³² / 27
s = 5.22x10⁻⁹ MThis would be the solubility of the compound.
Hope this helps