As a result, the amount of force the truck exerts on the automobile is equal to the amount of force the truck exerts on the car.
As per Newton's third law of motion
If object A applies a force to object B, then object B must apply a force to object A in the opposite direction and of equal strength. This rule illustrates a symmetry in nature whereby forces always occur in pairs and that no body can exert a force without also being subjected to one.
Because the accident is a head-on collision, according to Newton's third law, both the automobile and the truck will exert equal force against one another.
As a result, it will be safe to ride in the truck since the automobile will accelerate more quickly under the same force due to its lighter weight. Bigger acceleration results in a greater change in velocity, which increases the driver's workload.
For more questions on Newton's third law of motion
https://brainly.com/question/25998091
#SPJ4
An infinite line of charge produces a field of magnitude 4.5 ( 104 N/C at distance 2.0 m. Find the linear charge density.
the linear charge density of the infinite line of charge is 5 x 10^-6 C/m.
The linear charge density (λ) of an infinite line of charge is a measure of the charge per unit length. It is given by the equation:
λ = E / k. Where E is the electric field strength at a given point and k is the Coulomb's constant (9 x 10^9 N m²/C²). We know that the electric field strength at a distance of 2.0 m from the line of charge is 4.5 x 10^4 N/C. So we can substitute these values into the equation above to find the linear charge density:λ = (4.5 x 10^4 N/C) / (9 x 10^9 N m²/C²) λ = 5 x 10^-6 C/m Therefore, the linear charge density of the infinite line of charge is 5 x 10^-6 C/m. This means that there is 5 x 10^-6 Coulombs of charge per meter of length on the line of charge.
Learn more about linear charge density here:
https://brainly.com/question/12968377
#SPJ4
When you step on the break, the car engine rotation rate decreases from 10 rad/s to 6.3 rad/s in 5.0 s. What is the magnitude of the average angular acceleration
The average angular acceleration has a value of 0.74 rad/s2.
What leads to a reduction in angular speed?Applying a force tangential to the rim and in the direction of the instantaneous velocity of the piece of the rim you are applying the force to will most likely increase the angular speed. Reversing the direction of the force will slow down the angular speed.
What are the positions of and when rotation is accelerating?(rad/s)/s or rad/s2 are the units of angular acceleration. If rises, is a positive number. is negative if it decreases. Remember that the positive direction is counterclockwise and the negative direction is clockwise.
F = m r α . τ=mr2α. τ = m r 2 α
initial rotaton speed=10rad/s
final speed=6.3rad/s
time=5sec.
α=(10-6.3)/5 =.74rad/s
To know more about angular acceleration visit:-
https://brainly.com/question/14769426
#SPJ4
What is the difference between active and passive flexibility?
The difference between active flexibility and passive flexibility is that in active flexibility, we rely on our own muscle power to reach the end range, but in passive flexibility, we rely on an external push to reach the end range.
According to the findings of recent studies, active flexibility has a stronger connection to a person's level of sporting performance than passive flexibility does. The ability to build active flexibility is more difficult to achieve than passive flexibility. Active flexibility involves passive flexibility in addition to muscle strength in order to be able to retain and maintain the initial extended position.
To learn more about active flexibility and passive flexibility, click here:
https://brainly.com/question/14345573
#SPJ4
The Humber Bridge in England has the world's longest single span, 1410 m. Calculate the change in length of the steel deck of the span when the temperature increases from -5.0 degree C to 18.0 degree C.
Assuming the steel deck has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C, the change in length of the steel deck of the span when the temperature increases from -5.0 degree C to 18.0 degree C is 2.16 m. (1410 m x 12 x 10-6 m/m/°C x 23°C = 2.16 m)
Steel is an alloy made of iron and other elements, and is one of the most widely used materials in the world. Steel structures such as bridges are subject to changes in size and shape due to changes in temperature. When steel is exposed to temperatures higher than 0°C, it expands, and when it is exposed to temperatures lower than 0°C, it contracts.
The coefficient of linear thermal expansion is the rate at which the length of an object changes with temperature. This coefficient can vary depending on the type of steel and other factors. For the Humber Bridge, the steel deck of the span has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C. Therefore, when the temperature increases from -5.0°C to 18.0°C, the steel deck of the span will expand by 2.16 m.
To know more about linear thermal expansion refer to the link brainly.com/question/28232487
#SPJ4
An argon ion laser emits light at 488 nm. What is the frequency of this radiation
The frequency of the radiation will be 6.098 x 1014 Hz.
The frequency of a radiation is measured in hertz (Hz) and is the number of complete cycles per second of a wave. It is commonly used to measure electromagnetic radiation, such as radio waves and x-rays.
An argon ion laser emits light at a wavelength of 488 nm.
To find the frequency of this radiation, we need to use the equation f = c/λ, where
c is the speed of light (299,792,458 m/s) and
λ is the wavelength in meters.
Plugging in 488 nm (or 0.000488 m) for λ gives us a frequency of 6.098 x 1014 Hz.
To learn more about radiation, click here:
https://brainly.com/question/893656
#SPJ4
In 1935, a french destroyer , La Terrible , started from rest and accelerates to attain a speed of 83km/h. Suppose it took 2 minutes for the ship to speed up. Find the ships average acceleration.
According to the given statement The ships average acceleration is 2790 km/hr².
What is an explain acceleration?A measure of how quickly motion's speed and direction change over time. When a point or object advances or decelerates, it is moving straight forward. Motion on a circle increases despite the same speed because the direction is always changing.
Calculation:We know that from newton's equation,
v² + u² = 2as
S = ut + 0.5 at²
Where, v = final speed
u = initial speed
a = acceleration
S = distance covered
t = time taken
Given, u = 0
So the equations becomes:
v² = 2as
S = 0.5 at²
Using these equations we get:
v² = 2a(0.5)at²
v² = a²t²
v = at
v/t = a
Given, v = 93 km/hr
t = 2 min = 2/60 hr
Putting these values in above equation we get, a = 2790 km/hr²
So, the ships average acceleration is 2790 km/hr²
To know more about Acceleration visit:
https://brainly.com/question/3046924
#SPJ1
Suppose you have a light spring stretched out and one end is attached to a wall. With this setup, you can move the free end in any of three directions (x,y, z). The spring lies along the z axis.
Which type of wave do you create when you move the free end along the z axis?
Which type of wave do you create when you move the free end along the x axis?
Which type of wave do you create when you move the free end along the y axis?
CHoose one for each.
transverse
longitudinal
When you move a stretched out light spring one end attached to a wall lying in z-axis along z-axis, you get a longitudinal wave and when along x-axis or y-axis, you get a transverse wave.
When you move the free end of the spring along the z axis (the axis along which the spring is stretched), you create a longitudinal wave. This is because the displacement of the spring particles is in the same direction as the direction of wave propagation.
When you move the free end of the spring along the x axis, you create a transverse wave. This is because the displacement of the spring particles is perpendicular to the direction of wave propagation.
When you move the free end of the spring along the y axis, you create a transverse wave. Similarly to x axis, the displacement of the spring particles is perpendicular to the direction of wave propagation.
To know more on longitudinal and transverse wave
https://brainly.com/question/2568525
#SPJ4
If hydrogen gives off 10 units of energy, but takes 15 units of energy to produce, what is its net energy ratio
The net energy ratio of hydrogen is 0.67.
What is net energy ratio?The net energy ratio, also known as energy return on investment (EROI), is a measure of the efficiency of a fuel source or energy system. It represents the ratio of the energy output to the energy input, or the amount of energy that is produced compared to the amount of energy that is required to produce it.
A net energy ratio of 1 means that the energy output is equal to the energy input, and that no net energy is produced.
In the case of hydrogen, it gives off 10 units of energy but takes 15 units of energy to produce, so the net energy ratio would be:
Energy output / Energy input = 10 units / 15 units = 0.67
Hence, the net energy ratio of hydrogen is 0.67. This means that for every 1 unit of energy put into producing hydrogen, only 0.67 units of energy are obtained.
To learn more about hydrogen from the given link:
https://brainly.com/question/28937951
#SPJ4
a skier of mass m starts from rest at the top of a solid sphere of radius r and slides down its frictionless surface. (a) aat what angle will the skier leave the sphere? (b) if friction were present, would the skier fl off at a freater or lesser angle?
A skier of mass m starts from rest at the top of a solid sphere of radius r and slides down its frictionless surface.
The net force on the skier in the radial direction must be equal to the centripetal force in order to sustain circular motion.
[tex]$F_{\mathrm{radial}}=\frac{m v^2}{r}$[/tex]where [tex]v[/tex] denotes the skier's tangential instantaneous speed. Gravity and the normal force are the two forces at work on the skier. While the gravitational force is constantly radially outward, the normal force is always dependent on the angle [tex]\theta[/tex]. Therefore, the net force in the radial direction is, if the skier is at an angle of [tex]\theta[/tex] down the sphere.
[tex]$F_{\text {radial }}=m g \cos \theta-N$[/tex]
where N is the normal force's magnitude. When these two equations are combined, we get,
[tex]$\frac{m v^2}{r}=m g \cos \theta-N$[/tex]
Using the principle of energy conservation, we now substitute v with values we already know. The loss of potential energy equals the increase in kinetic energy, which on a sphere is written as,
[tex]$\frac{1}{2} m v^2=m g r(1-\cos \theta)$[/tex]
As the skier begins at rest, there is no kinetic energy at the top of the sphere. After removing [tex]v^2[/tex], we are left with the equation,
[tex]$2 m g(1-\cos \theta)=m g \cos \theta-N$[/tex]
Quantifying the situation when the skier exits the sphere is the last aspect of the issue. We can see that when theta equals 0, we get N = mg, which means that the normal force acting on the skier precisely balances the force of gravity. N decreases as the skier descends the sphere's surface, balancing the equation until it equals zero at a certain angle. This occurs precisely when,
[tex]$2 m g(1-\cos \theta)=m g \cos \theta$[/tex]
The skier is no longer in contact with the sphere when the normal force acting on the skier is zero, as the sphere no longer exerts any force on the skier. This is assumed to be the prerequisite for the skier to leave the ground.
After calculating [tex]\theta[/tex], we have,
[tex]$2 m g=3 m g \cos \theta$[/tex]
[tex]$\Longrightarrow \theta=\cos ^{-1}(2 / 3) \approx 48.19^{\circ}$[/tex]
First, we can note that this response is unaffected by the physical parameters m, r, and g. No matter how heavy he is, how huge the sphere is, or how powerful gravity is, the skier will exit the sphere at the same angle.
However, we will discover from dimensional analysis that this independence is actually not all that remarkable. Consider the units of the variables we've provided,
[tex]$[m]=$ kilograms,$\quad[r]=$ meters,$\quad[g]=$ meters $\cdot$ seconds $^{-2}$[/tex]
Any algebraic statement containing m, r, and g cannot be transformed into a dimensionless quantity. As a result, we draw the conclusion that the solution to our problem cannot depend on these values as an angle is a dimensionless quantity.
Learn more about Rest here:
https://brainly.com/question/26235448
#SPJ4
Which of the following bodies are at thermal equilibrium when being put into contact? (1) A glass of water of internal energy E at 20 °C (2) Alcohol with unknown internal energy at 20 °C (3) A jar of water of internal energy E at 25 °C A(1) and (2) only B(1) and (3) only C(2) and (3) only D(1), (2) and (3)
When two bodies at equal temperature are brought in contact with each other then no heat flows between them and they are said to be in thermal equilibrium.
When bodies in contact are in thermal equilibrium then they have the same?When the engine temperature eventually reaches the same level as the ambient temperature, thermal equilibrium has taken place. After being placed on the table and waiting a short while, a cup of hot tea cools to the same temperature as its surroundings.
This is where thermal equilibrium occurs. the set temperature at which all of a solid's mass melts. When the solid turns into a liquid, both the solid and the liquid coexist in the thermal equilibrium.
The individual drove himself to his location. The engine temperature was excessively high during that time, but it eventually dropped to the air temperature outside. When the engine temperature eventually reaches air temperature, thermal equilibrium has occurred.
To learn more about thermal equilibrium refer to:
https://brainly.com/question/14556352
#SPJ1
A(1) and (2) only of the following bodies are at thermal equilibrium when being put into contact. i.e. (1) A glass of water of internal energy E at 20 °C (2) Alcohol with unknown internal energy at 20 °C .
What is thermal equilibrium?When two physical systems are linked by a channel permeable to heat, they are said to be in thermal equilibrium if there is no net transfer of thermal energy between them. The zeroth law of thermodynamics is observed during thermal equilibrium.As internal energy is measured in terms of the body temperature, when two bodies are in thermal equilibrium, their internal energies will also be equal.
to know more about internal energy visit
https://brainly.com/question/11278589
#SPJ1
Does the effective thermal conductivity of an insulation system account for heat transfer by conduction alone
Yes, effective thermal conductivity of an insulation system accounts for heat transfer by conduction.
What do you mean by thermal conductivity?
Thermal conductivity is a property of a material that describes its ability to conduct heat. It is typically measured in units of watts per meter per kelvin (W/m·K). The thermal conductivity of a material is affected by various factors, such as temperature, pressure, and the presence of impurities or defects.
The effective thermal conductivity of an insulation system is a measure of its ability to resist heat transfer by conduction. It does not take into account other forms of heat transfer, such as convection or radiation.
The value of the thermal conductivity is typically measured by determining the rate of heat flow through a sample of the insulation material under specific conditions of temperature and pressure.
The lower the thermal conductivity, the better the insulation's ability to resist heat transfer by conduction.
Hence, effective thermal conductivity of an insulation system accounts for heat transfer.
To learn more about thermal conductivity from the given link:
https://brainly.com/question/11213835
#SPJ4
What is the lever arm formula?
The distance that separates the force's line of action from its rotational axis is known as the lever arm. and the torque's magnitude is = N m.
τ = F x r
Signs:- Torque = τ
Force = F
Lever Arm Length = r
In many electromechanical driving systems, lever arms are used. Axles and spindles are nonrotating shafts, while transmission shafts are rotating components that move power and torque from one place to another. Shafts can be either hollow or solid. In gate drive applications, particularly for radial gates and vertical gates, hollow shafts are sometimes referred to as torque tubes.
This is so that they can transfer torque to a hoist winch, which is their main function in these gate drives. For gate drives, the shafting may be subjected to axial forces, torsion from transmitted torque, bending from transverse loads from gears, sprockets, and sheaves, and torsion owing to transmitted torque.
know more about torque here
https://brainly.com/question/25708791#
#SPJ4
what's the average speed of a bike rider who rides for 3 hours at 40 km/hr and the 2 more hours at 50 km/hr
The average speed of a bike rider who rides for 3 hours at 40 km/hr and two more hours at 50 km/hr can be calculated by adding the total number of kilometers ridden and dividing it by the total time taken.
In this case, the rider has ridden for a total of 5 hours and has covered a total of 290km (3×40 + 2 × 50). Therefore, the average speed of the rider is 58km/hr (290/5).
Average speed can be defined as the rate at which an object covers a given distance over a given period. It is usually measured in kilometers per hour (km/hr), meters per second (m/s), or miles per hour (mph).
Average speed is calculated by dividing the total distance traveled by the total time taken. In this case, the rider has ridden for a total of 5 hours and has covered a total of 290km (3 × 40 + 2 × 50).
Therefore, the average speed of the rider is 58km/hr (290/5).
Learn more about speed:
https://brainly.com/question/13943409
#SPJ4
Why is static flexibility important?
Static stretching promotes range of motion (ROM), reduces musculotendinous stiffness, and lowers the risk of acute muscle strain injuries by relaxing and lengthening the muscles.
Benefits and objectives:Static is primarily used for variables or methods that are constant across all instances of a class. Static stretching has the potential to reduce discomfort and stiffness after a workout while also enhancing flexibility and range of motion. To help you feel more relaxed, static stretching is a fantastic approach to help your muscles release stress and tension. It is quite efficient to improve flexibility in this way. You should incorporate static stretches into your cool-down routine to help prevention of injury.
To learn more about flexibility visit:
brainly.com/question/2645707
#SPJ4
what is the relationship between star temperature and luminosity in the main sequence
The relationship between star temperature and luminosity in the main sequence is known as the main sequence mass-luminosity relationship.
What is luminosity?
Luminosity is the amount of light and other forms of electromagnetic radiation emitted by a star, galaxy, or other celestial object. It is typically measured in units of watts per square meter (W/m2). Luminosity is related to the total energy output of a star or other celestial body and is an important factor in determining its temperature, composition, and other physical properties.
This relationship states that the hotter the star, the more luminous it is. This is because hotter stars are more massive and more luminous than cooler stars. As the star's temperature increases, so does its luminosity.
To know more about luminosity,
https://brainly.com/question/4262106
#SPJ4
The resistance of a filament that carries 2 A when a 10-V potential difference across it is. A) 2 ohms. B) 5 ohms. C) 10 ohms. D) 20 ohms.
The resistance of the filament which carries the current of 2 A and has a potential difference of 10 V is b) 5 ohms
The current passing through the filament = 2A
The potential difference in the filament = 10 V
The resistance of the filament can be found using the formula,
R = V/I
where R is the resistance of the filament
V is the potential difference between the filament
I is the current passing through the filament
Let us substitute the known values in the above equation, we get
R = 10 / 2
= 5 ohms
Therefore, the resistance of the filament is 5 ohms
Learn more about the resistance in
https://brainly.com/question/29427458
#SPJ4
You are handed a pring that i 0. 400 m long. You hang the pring from a hook
on the ceiling and attach a 0. 750-kg ma to the other end of the pring. The
tretched pring length i 0. 450 m. What i the pring contant?
The spring constant with given length that stretches upto certain length and has specified mass has a spring constant that is calculated to be 147 N/m.
Given that,
Initial length of the spring = 0.400 m
Final length of the spring = 0.450 m
Change in length, Δx = 0.450 m - 0.400 m = 0.050 m
Mass of the hung object = 0.750 kg
Weight of the hung object, w = 0.750 × 9.8 N = 7.35 N
From Hooke's law it is said that, mathematically
Spring constant = Weight of the hung object/ change in length
Putting in the above given values into the equation, we have,
Spring constant = 7.35/0.050 = 147 N/m
The required spring constant is calculated to be 147 N/m.
To know more about spring constant:
https://brainly.com/question/27030932
#SPJ4
How do you solve a torque problem in physics?
Calculate the angle between the vector connecting the force's application point and the pivot point and the direction of the applied force. You may calculate the torque by multiplying r by F and sin.
How does physics explain torque?The force that can cause an object to revolve around an axis is measured in torque. Torque accelerates an object in an angular direction, much like force does in linear kinematics.
An easy explanation of torqueAn angular force known as a torque tends to produce rotation along an axis, which could be the center of mass or a fixed point. Torque can also be thought of as a thing's capacity in order to overcome turning resistance, such as a shaft or a gear, that is rotating.
To know more about torque visit:-
https://brainly.com/question/14970645
#SPJ4
How to calculate distance of a ball rolling down a ramp?
With the equation: it is possible to determine t for each of the four ramp segments. t 1 = t 2 - t 1, and t 2 = t 4 - t 3 Likewise, x is the distance between the designated spots for times 3 and 4, respectively.
Although the gravitational force is same when you roll the ball down a ramp, it is no longer in free fall. Now, it has a vector structure. Knowing the downward force and the ramp's incline makes the problem appear to be Pythagorean. Keep in mind that the ball will go at the same speed at the bottom of the ramp as it would have. A ball begins rolling down a ramp with constant acceleration at time zero (t=0), initially at rest. It moves 1 foot between t=0 and t=1 seconds, you see. How much movement occurs between t = 1 second and a.
To learn more about ramp's please click on below link
https://brainly.com/question/13492520
#SPJ4
o, the point at which we lose awareness of the intervals and begin to see apparent motion seems to kick in at around ________ frames per second. 16 - 20
The point at which we lose awareness of the intervals and begin to see apparent motion seems to kick in at around 8 - 12 frames per second.
What is frames per second?The frequency (rate) at which consecutive images (frames) are captured or displayed is known as frame rate and is expressed in frames per second (FPS). The phrase is equally applicable to motion capture devices, computer graphics, and film and video cameras.
Frame frequency, also known as frame rate, is measured in hertz. Frame rate in electronic camera specifications may refer to the highest possible rate, whereas in practise, other settings (like exposure time), may reduce the frequency to a lower number.
Individual differences exist in both the type and properties of the visual stimulus as well as the temporal sensitivity and resolution of human vision. The human visual system can process 10–12 images per second, each of which is perceived individually; higher rates are interpreted as motion.
Learn more about frame rate
https://brainly.com/question/17453877
#SPJ4
If you have a set of holiday lights that is on a series circuit, predict what would happen if the series circuit were cut off in the middle. Infer how this would differ from what would happen with a parallel circuit.
If the series circuit that powers your holiday lights were to be severed in the middle. The lights would all stop functioning. Only one light would stop working if the lights were linked in parallel circuit.
A series circuit is a straightforward circuit that enables electrons to go between one or more resistors. A resistor is anything that drains energy from a cell (battery). The resistor in a series circuit is typically a lightbulb. A series circuit is one in which the entire current flows through each element. A series circuit is a straightforward circuit that enables electrons to go between one or more resistors.
Learn more about series circuit here
https://brainly.com/question/11409042
#SPJ4
A person weighing 6:0 102 newtons rides an elevator upward at an average speed of 3.0 meters per second for 5.0 seconds. How much does this person's gravitational potential energy increase as a result of this ride
This ride increases this person's gravity potential energy by 9000 Joules.
What is gravitational force ?The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of their distance, according to Newton's universal law of gravitation.
What is energy ?The definition of energy is "the ability to do work, which is the capability to apply a force causing the displacement of an object." Despite this vague description, energy simply refers to the power that propels motion.
Weight of the person, W = 6 x 102 N = 600 N
Avg. Speed of elevator, v = 3 m/s
Time of ride, t = 5 sec.
Therefore,
Mass of the person, m = W/g = 600/9.8 = 61.2244 kg
Height of the elevator after 5 sec, h = v x t = 3 x 5 = 15 m
Potential energy increase , PE = mgh = 61.2244 x 9.8 x 15
PE = 9000 Joule
Therefore, 9000 Joule does this person's gravitational potential energy increase as a result of this ride.
To know more about gravitational force visit:
https://brainly.com/question/29276623
#SPJ4
________ are designed to smother a small fire and are very useful in putting out a fire on a person.
An extinguishing agent, including such water or chemicals, is stored in a fire extinguisher. It is not intended to put out a large fire, only a small one.
How do fire extinguishers function?To burn, fire needs fuel, heat, and oxygen. In order to stop a fire from spreading, fire extinguishers use a substance to reduce the heat of the flames, smother the fuel, or cut off the oxygen supply. If used by a trained person, a portable fire extinguisher can quickly put out a small fire.
Why is the red fire extinguisher?First off, red is the color linked to both danger and fire, making fire extinguishers an obvious association. Second, red is the color that is easiest to see, particularly in darker settings like a smoke-filled
To know more about fire extinguisher visit:
https://brainly.com/question/30040658
#SPJ4
A soccer ball is moving with a momentum of 5 kg m/s when a soccer player
kicks the ball back in the opposite direction. After the kick, the soccer ball
is moving with a momentum of 7 kg m/s. What is the impulse the soccer
player applied to the soccer ball?
The impulse applied to the soccer ball by the soccer player is the combined force and time of the kick applied to the ball.
What do you mean by Impulse?
Impulse is an instantaneous force applied to an object, resulting in a change in the object's momentum. It is a vector quantity, which means that it has both magnitude and direction. Impulse is the product of a force applied to an object for a certain period of time. It is calculated as the product of the average force applied multiplied by the time period over which the force is applied. For example, when a ball is hit with a bat, the force of the bat is applied to the ball for a certain amount of time, resulting in an impulse which causes the ball to move.
1. Calculate the change in momentum of the soccer ball:
Change in momentum = Final Momentum - Initial Momentum
= 7 kg m/s - 5 kg m/s
= 2 kg m/s
2. Calculate the impulse:
Impulse = Change in Momentum
= 2 kg m/s
Therefore, the impulse applied by the soccer player to the soccer ball is 2 kg m/s.
To know more about impulse,
https://brainly.com/question/29787329
#SPJ4
d. A brass measuring tape is correct at 20°C. The value obtained when the length of a field is measured with the rule at 50°C appears to be 70.5 m. What is the true length of the field? Linear expansivity of brass 1.8 x 10-5 K-1,
Answer:
The answer would be 52.8m
1. A Major League pitcher can give a 0. 142-kg base-
ball a speed of 45. 1 m/s. Find the magnitude of the
baseball's momentum.
The baseball's momentum will be 2.75 m/s in magnitude. This is the accurate answer to the given problem.
What are velocity and momentum?Momentum and velocity are different in that momentum is a measurement of an object's amount of motion, whereas velocity is a measurement of an object's speed with direction. Velocity is one of the components of momentum since momentum is equal to an object's mass multiplied by its speed.
Is speed the same as momentum?p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.
Briefing:P initial = (145g) x (45 m/s) = 6525 g*m/s
F = 0-6525/1.0s = -6525N
To learn more about momentum visit:
brainly.com/question/24030570
#SPJ4
Sound travels at 343 m/s through dry air.If a lightning bolt strikes the ground 2000 m away from you,How long will it take for the sound to reach you?
The time it takes the sound wave to travel to and fro through 2000 m is 11.66 seconds.
What is sound wave?A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium.
To calculate the time it takes the sound wave to travel, we use the formula below
Formula:
t = 2d/v...................... Equation 1Where:
t = Timed = Distancev = VelocityFrom the question,
d = 2000 mv = 343 m/sSubstitute these values into equation 1
t = (2×2000)/343t = 11.66 secondsThe time it takes is 11.66 seconds.
Learn more about sound wave here: https://brainly.com/question/29402395
#SPJ1
The work you do when pushing a shopping cart twice as far while applying double the force is
A) half as much
.B) twice as much.
C) four times as much.
D) the same amount.
The work you do when pushing a shopping cart twice as far while applying double the force is twice as much as force.
What is Force?
A push or pull that an object experiences as a result of interacting with another item is known as a force. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends.
Contact forces are the kinds of forces that develop when two objects interact and appear to be in physical contact with one another. Frictional forces, tensional forces, normal forces, air resistance forces, and applied forces are a few examples of contact forces.
Forces that come from action at a distance.
Therefore, The work you do when pushing a shopping cart twice as far while applying double the force is twice as much as force.
To learn more about Forces, refer to the link:
https://brainly.com/question/13191643
#SPJ1
The crest of one wave of amplitude 1 meter intersects the crest of another wave of amplitude 3 meter. What is the resultant amplitude
A wave crest is the tallest point in the wave with the greatest displacement value. The junction of the 3-meter and 2-meter waves produces a 1 metre amplitude.
What exactly is amplitude ?
The amplitude of a wave is the measurement of the wave from its still position to its crest or trough. It is measured in metres.
When the wave is crossed, the elevation is 3 metres and the depression is 2 metres, resulting in an amplitude that causes destructive interference. Because 3 m is above the baseline and 2 m is below it, the resultant amplitude is 3 - 2 = 1 m.
As a consequence, the resultant amplitude is one metre.
To learn more about amplitude follow the given link: brainly.com/question/13814350
#SPJ4
How is torque calculated using the moment arm?
Torque is calculated using the moment arm is Torque =Lever Arm x Fy (or Force sin( )) Torque = Force (Fm) x Moment Arm.
How is torque moment calculated?Calculating Torque: The formula for torque is =|r| |F|sin = | r | | F | sin, where |r| is the size of the lever arm, |F| is the size of the force vector, and is the angle created between the two vectors.
Is torque equivalent to the moment arm?In mechanics, they have slightly different meanings but the same meaning in physics. The moment is a static force, whereas the torque is a moving force, even though they both have the same unit, N-m. Torque is utilized when there is rotation, whereas moment is used when there isn't.
To know more about Torque visit:-
https://brainly.com/question/28220969
#SPJ4