The structure of trans-5,5-dichlorooct-3-ene consists of an 8-carbon chain with a double bond between the 3rd and 4th carbons and two chlorine atoms on the 5th carbon, positioned on opposite sides of the chain to represent the trans stereochemistry.
Please follow these steps to draw the structure, ensuring that the stereochemistry is clear:
1. Begin by drawing the main carbon chain of octene, which consists of 8 carbon atoms connected in a straight line.
2. Locate the 3rd carbon atom in the chain (counting from either end), and draw a double bond between the 3rd and 4th carbon atoms. This represents the "-ene" part of the molecule's name.
3. Now, move to the 5th carbon atom in the chain (counting from either end), and draw two chlorine atoms (Cl) connected to it. These represent the "5,5-dichloro" part of the molecule's name.
4. Since the molecule is specified as trans, ensure that the two chlorine atoms are on opposite sides of the carbon chain. Draw the chlorine atoms using wedges and dashes to clearly indicate their positions in 3D space. One chlorine atom should be drawn with a solid wedge, indicating that it is coming out of the plane towards you, while the other chlorine atom should be drawn with a dashed wedge, indicating that it is going away from the plane.
To know more about "Stereochemistry" refer here:
https://brainly.com/question/13266152#
#SPJ11
From the GC obtained in today's experiment, please complete the following statements: 1. For the fraction injected in the video to demonstrate the use of the GC, the hexane had a Select ] retention time compared with the toluene peak. 2. The fraction used to demonstrate the use of the GC gave two peaks with short retention time and one peak with longer retention time. The smallest of the short retention time peaks was [ Select ] 3. For the Fraction 1 (the fraction that distilled first), we expect the toluene peak to be the one with [Select] area. 4. For the fraction 3, we expect that the hexane peak would be the one with the [ Select] area. 5. The component with larger Boiling Point will have a [ Select] retention time. 6. Fraction 2 (if it was injected) will show that the peak of hexane would have [Select ] area than the peak of toluene. 7. To assign peaks in a GC one of the factors to consider is the [Select] [ V of the components. The [Select ] the boiling point, the slower will elute and [ Select) the retention time. 8. In a distillation, the [Select] volatile will distill first. While the distillation progresses, the temperature will raise and the [Select ] volatile will distill and
For the fraction injected in the video to demonstrate the use of the GC, the hexane had a shorter retention time compared with the toluene peak.
The fraction used to demonstrate the use of the GC gave two peaks with short retention time and one peak with longer retention time. The smallest of the short retention time peaks was the peak of hydrogen (H₂).
For Fraction 1 (the fraction that distilled first), we expect the toluene peak to be the one with the largest area.
For fraction 3, we expect that the hexane peak would be the one with the largest area.
The component with a larger boiling point will have a longer retention time.
Fraction 2 (if it was injected) will show that the peak of hexane would have a larger area than the peak of toluene.
To assign peaks in a GC, one of the factors to consider is the volatility (V) of the components. The higher the boiling point, the slower it will elute and the longer the retention time.
In a distillation, the more volatile compound will distill first. As the temperature rises, the less volatile compound will then distill.
The GC video showed that hexane had a shorter retention time compared to the toluene peak. Retention time is the time taken for a component to elute from the GC column and reach the detector. Compounds with shorter retention times elute faster and are detected earlier.
The fraction demonstrated in the GC had two peaks with short retention times and one peak with a longer retention time. The smallest of the short retention time peaks was the peak of hydrogen (H₂). Peaks on a GC chromatogram correspond to different compounds or components in the sample.
For Fraction 1 (the fraction that distilled first), the toluene peak is expected to have the largest area since it is the major component in the mixture and is expected to elute first.
For fraction 3, the hexane peak is expected to have the largest area since it is the major component in the fraction and is expected to elute first.
The component with a larger boiling point will have a longer retention time. Boiling point is the temperature at which a liquid turns into a gas. Compounds with higher boiling points will require more energy to turn into gas and will, therefore, take longer to elute from the GC column.
Fraction 2 (if injected) would show that the peak of hexane would have a larger area than the peak of toluene since hexane is the major component in the fraction and is expected to elute first.
To assign peaks in a GC, one of the factors to consider is the volatility (V) of the components. Volatility is the tendency of a compound to evaporate. Compounds with higher boiling points are less volatile and will take longer to elute from the GC column, resulting in longer retention times.
In a distillation, the more volatile compound will distill first. As the temperature of the mixture is raised, the boiling point of the components increases. The less volatile compound will then distill as the temperature continues to rise.
For more questions like Temperature click the link below:
https://brainly.com/question/11464844
#SPJ11
The electrical properties of the Atlantic Ocean are given by , , . Show that it is a conductor up to a frequency of about 10 MHz. What is the longest electromagnetic wavelength you would expect to propagate under water?
The Atlantic Ocean has electrical conductivity due to the presence of dissolved salts, making it a conductor up to a frequency of around 10 MHz.
The longer the wavelength of an electromagnetic wave, the more it interacts with the medium it passes through, leading to attenuation. In water, the longest wavelength that can propagate is around 2000 meters, corresponding to a frequency of 150 kHz.
This is because at longer wavelengths, the water molecules cannot respond quickly enough to the changing electromagnetic field, leading to significant energy loss through absorption and scattering.
Therefore, for underwater communication or sensing applications, frequencies below 10 MHz would be ideal to maximize propagation distance and reduce signal loss.
To know more about electrical conductivity click on below link:
https://brainly.com/question/31668005#
#SPJ11
write the law of mass action for the equation 2a(aq) b(s) ⇌ c(aq) 3d(aq)
The law of mass action for the given equation is that the rate of the forward reaction is proportional to the product of the concentrations of the reactants (a and b) raised to their stoichiometric coefficients (2 and 1, respectively), while the rate of the reverse reaction is proportional to the product of the concentrations of the products (c and d) raised to their stoichiometric coefficients (1 and 3, respectively). Therefore, the expression for the equilibrium constant (Kc) is:
Kc = [c][d]^3 / [a]^2[b]
where [ ] represents the concentration in moles per liter. This equation relates the equilibrium concentrations of the species in the reaction to the value of Kc, which is a constant at a given temperature.
Learn more about law of mass action: Explain the law of conservation of mass and how it applies to balancing chemical equations https://brainly.com/question/2030891
#SPJ11
Use the standard free energies of formation in Appendix B to calculate the standard cell potential for the reaction in the hydrogen-oxygen fuel cell:
2H2(g)+O2(g)→2H2O(l)
The standard potential for the following galvanic cell is 1.73 V:
Zn(s)|Zn2+(aq)||Pu4+(aq),Pu3+(aq)|Pt(s)
(Plutonium , Pu, is one of the actinide elements.) The standard reduction potential for the Zn2+/Zn half-cell is −0.76 V.
Calculate the standard reduction potential for the Pu4+/Pu3+half-cell.
The driving force of the electron flow from anode to cathode shows a potential drop in the energy of the electrons moving into the wire. The standard cell potential, also known as the electromotive force (emf). Here standard cell potential for the reaction 2H2(g) + O2(g) → 2H2O(g) is -1.48V.
The difference in potential energy between the anode and cathode is defined as the cell potential in a voltaic cell. It is the measure of the potential difference between two half-cells of an electrochemical cell when all reactants and products are present at the standard state.
E°cell = Ecathode - Eanode
E°cell = -0.824 - +0.656 = -1.48 V
To know more about cell potential, visit;
https://brainly.com/question/1313684
#SPJ1
calculate the concentration of c6h5nh3 c6h5nh3 and cl−cl− in a 0.215 mm c6h5nh3clc6h5nh3cl solution.
The concentration of c6h5nh3 and cl− in the 0.215 mm c6h5nh3clc6h5nh3cl solution is 0.001 mol/L for both. To calculate the concentration of c6h5nh3 and cl− in a 0.215 mm c6h5nh3clc6h5nh3cl solution, we need to use the equation:
concentration = moles of solute / volume of solution
First, we need to determine the moles of c6h5nh3 in the solution:
moles of c6h5nh3 = (0.215 mm) * (1 mol / 1000 mm) = 0.000215 mol
Next, we need to determine the moles of cl− in the solution. Since there is an equal number of moles of cl− as there are moles of c6h5nh3, we can simply use the same value:
moles of cl− = 0.000215 mol
Finally, we can use the same equation to calculate the concentration of c6h5nh3 and cl−:
concentration of c6h5nh3 = 0.000215 mol / 0.215 L = 0.001 mol/L
concentration of cl− = 0.000215 mol / 0.215 L = 0.001 mol/L
Therefore, the concentration of c6h5nh3 and cl− in the 0.215 mm c6h5nh3clc6h5nh3cl solution is 0.001 mol/L for both.
Learn more about concentration here:
https://brainly.com/question/13872928
#SPJ11
244.0 ml of 1.04 m naoh express your answer with the appropriate units.
The given quantity is 244.0 mL of 1.04 M NaOH. This means that there are 1.04 moles of sodium hydroxide per liter of solution. the number of moles of NaOH in 244.0 mL of 1.04 M NaOH solution is: 0.253 moles
To calculate the number of moles of NaOH in 244.0 mL of solution, we need to convert mL to L and then use the concentration formula:moles = concentration * volume. First, we convert 244.0 mL to liters: 244.0 mL * (1 L / 1000 mL) = 0.244 L
Now we can calculate the number of moles of NaOH: moles = 1.04 M * 0.244 L = 0.253 moles. Therefore, there are 0.253 moles of NaOH in 244.0 mL of 1.04 M NaOH solution.
It's important to note that the concentration of a solution is expressed in units of moles per liter (M or molarity). This tells us the number of moles of solute (in this case NaOH) dissolved in one liter of solution. The volume of the solution is usually expressed in liters (L) or milliliters (mL).
In addition to using the appropriate units, it's important to pay attention to significant figures when performing calculations. In this case, the given quantity has four significant figures, so we should report our answer to the same number of significant figures.
Therefore, the number of moles of NaOH in 244.0 mL of 1.04 M NaOH solution is: 0.253 moles (rounded to four significant figures)
Know more about sodium hydroxide here:
https://brainly.com/question/29327783
#SPJ11
a)benzoic acid (pka=4.2) and b)phenol (pka=10) is a stronger acid. a)citric acid (pka=3.08) and b)phosphoric acid (pka=2.10) is a stronger acid.
Answer:
Phosphoric Acid
Explanation:
Phosphoric Acid is the strongest acid. The lower the pKa the stronger the acid.
You can justify this by calculating Ka, which Ka = 10^-pKa
The higher the Ka value, the greater the dissociation of the acid, the more hydrogen protons will be formed and the lower the pH making it a stronger acid.
A typical polyethylene grocery bag weighs 12.4 g. How many metric tons of CO2 would be released into the atmosphere if the 102 billion bags used in one year in the United States were burned?[1 metric ton = 1000 kg]
Assuming that burning one polyethylene grocery bag releases 0.04 kg of CO2 (as estimated by the EPA), the total amount of CO2 released from burning 102 billion .
bags would be 4.08 billion kg or 4.08 million metric tons (since 1 metric ton = 1000 kg). This calculation assumes that all 102 billion bags are burned and that all the carbon in the bags is converted to CO2 during the combustion process. However, it is important to note that recycling or properly disposing of plastic bags can significantly reduce their environmental impact and prevent the release of greenhouse gases.metric tons of CO2 would be released into the atmosphere if the 102 billion bags used in one year in the United States were burned?[1 metric ton = 1000 kg]
Learn more about CO2 here:
https://brainly.com/question/28870590
#SPJ11
A pair of students found the temperature of 100. g of water to be 25.80°C. They then dissolved 8.44 g of NH4Cl in the water. When the salt had dissolved, the temperature of the water was 20.23°C.(a) Calculate ΔT for the water.°C(b) The dissolution was ---Select---endothermic.exothermic.neutral.entropic.(c) The water ---Select---gave up energy to the dissolution process.absorbed energy from the dissolution process.was the inert, inactive solvent.(d) Based on this observation alone, the entropy ---Select---must have increased.must have decreased.did not change enough to matter.change cannot be determined.(e) Give the reaction for the dissolution of the salt in water. (Use the lowest possible coefficients. Include states-of-matter under the given conditions in your answer.)(f) When 8.44 grams of NH4Cl is dissolved, how many moles of cation are produced?molHow many moles of anion are produced?mol(g) If double the amount of NH4Cl was added to 100. g of water, what would happen to the temperature change?The temperature change would be twice as large.The temperature change would be three times as large.The temperature change would be one-half as large.The temperature change would be one-third as large.The temperature change would be four times larger.The temperature change would be the same.
(a) ΔT = Tfinal - Tinitial = 20.23°C - 25.80°C = -5.57°C
(b) The dissolution was exothermic.
(c) The water absorbed energy from the dissolution process.
(d) Based on this observation alone, the entropy must have increased.
(e) NH4Cl(s) → NH4+(aq) + Cl-(aq)
(f) When 8.44 grams of NH4Cl is dissolved, 0.133 moles of cation and 0.133 moles of anion are produced.
(g) If double the amount of NH4Cl was added to 100. g of water, the temperature change would be twice as large.
For(a), ΔT is calculated using the formula ΔT = Tfinal - Tinitial, where Tfinal is the final temperature of the solution and Tinitial is the initial temperature of the solution. In this case, ΔT = 20.23°C - 25.80°C = -5.57°C.
For(b), The dissolution is endothermic because the temperature of the solution decreased. Endothermic processes absorb heat from their surroundings, resulting in a decrease in temperature.
For(c), The water absorbed energy from the dissolution process. When a substance dissolves in a solvent, energy is required to break the intermolecular forces between the solute particles. This energy is absorbed from the surroundings, in this case the water.
For(d), Based on this observation alone, it is difficult to determine whether the entropy increased or decreased. However, since the dissolution process resulted in an increase in disorder (i.e. the solid NH4Cl particles became dispersed in the water), it is likely that the entropy increased.
For(e), The reaction for the dissolution of NH4Cl in water is NH4Cl(s) → NH4+(aq) + Cl-(aq)
For(f), 8.44 grams of NH4Cl is equal to 0.155 mol of NH4Cl. Since NH4Cl dissociates into one NH4+ cation and one Cl- anion, the number of moles of each ion produced is also 0.155 mol.
For(g), If double the amount of NH4Cl was added to 100 g of water, the temperature change would be twice as large. This is because the amount of heat absorbed or released during a process is proportional to the amount of substance involved in the process.
Learn More about Chemical Reactions
https://brainly.com/question/25769000
#SPJ4
calculate enthalpy change between saturated vapor and superheated steam
To calculate the enthalpy change between saturated vapor and superheated steam, you'll need to know the initial and final temperatures.
As well as the specific heat capacity of steam. The enthalpy change (ΔH) can be calculated using the formula:
ΔH = m × Cp × ΔT
Where:
- ΔH is the enthalpy change
- m is the mass of steam
- Cp is the specific heat capacity of steam (around 2.0 kJ/kg·K for superheated steam)
- ΔT is the change in temperature (final temperature - initial temperature)
First, find the initial temperature at which the steam is saturated (this can be found in steam tables). Then, determine the final temperature of the superheated steam.
Subtract the initial temperature from the final temperature to get ΔT. Finally, multiply the mass, specific heat capacity, and ΔT to calculate the enthalpy change.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
To calculate the enthalpy change between saturated vapor and superheated steam, you'll need to know the initial and final temperatures.
As well as the specific heat capacity of steam. The enthalpy change (ΔH) can be calculated using the formula:
ΔH = m × Cp × ΔT
Where:
- ΔH is the enthalpy change
- m is the mass of steam
- Cp is the specific heat capacity of steam (around 2.0 kJ/kg·K for superheated steam)
- ΔT is the change in temperature (final temperature - initial temperature)
First, find the initial temperature at which the steam is saturated (this can be found in steam tables). Then, determine the final temperature of the superheated steam.
Subtract the initial temperature from the final temperature to get ΔT. Finally, multiply the mass, specific heat capacity, and ΔT to calculate the enthalpy change.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
write the electron configuration for an argon cation with a charge of 2
An argon cation with a charge of 2+ has the following electron configuration: 1s2 2s2 2p6 3s2 3p6
The argon cation's current electron configuration shows that it has lost two electrons from its initial state of 1s2 2s2 2p6 3s2 3p6. It has specifically lost the two electrons in its outermost shell, leaving the filled inner shells in place. An atom becomes a positive-charged cation when one or more of its electrons are lost. The argon cation has lost two electrons in this instance, giving it a 2+ charge. The final form resembles the stable noble gas configuration of the element neon. The chemical characteristics of an argon cation with a 2+ charge, which has a decreased affinity for electrons and a greater propensity to interact with other elements in order to recoup electrons and reach a stable configuration, are explained by this configuration.
learn more about electrons here:
https://brainly.com/question/28977387
#SPJ11
The pH of a 0.25 M solution of HCN is 4.90. Calculate the Kavalue for HCN.a. 6.3 x 10−10b. 1.26 x 10−5c. More information is needed.d. 2.29 x 10−4e. 7.94 x 10 −10
The Ka value for HCN is 6.3 x [tex]10^{-10[/tex] given the pH of a 0.25 M solution of HCN is 4.90. The correct option is a.
To calculate the Ka value for HCN, we first need to determine the concentration of H+ ions using the given pH value. Then, we can set up an equilibrium expression and solve for Ka.
1. Calculate the concentration of H+ ions:
pH = 4.90
[H+] = [tex]10^{(-pH)} = 10^{(-4.90)} = 1.26 * 10^{-5} M[/tex]
2. Set up the equilibrium expression for HCN:
HCN ↔ H+ + CN-
Initial concentration: 0.25 M ----- 0 ----- 0
Change in concentration: -x ----- +x ----- +x
Equilibrium concentration: 0.25-x ----- x ----- x
Since x (concentration of H+) is much smaller than 0.25, we can assume that (0.25 - x) ≈ 0.25.
3. Write the expression for Ka:
Ka = ([H+][CN-])/[HCN] = (x)(x)/(0.25)
4. Solve for Ka:
Ka = (1.26 x[tex]10^{-5[/tex])(1.26 x [tex]10^{-5[/tex])/0.25 ≈ 6.3 x [tex]10^{-10[/tex]
Therefore, the Ka value for HCN is approximately 6.3 x [tex]10^{-10[/tex] (option a).
For more such questions on Ka.
https://brainly.com/question/29006496#
#SPJ11
The value of Ka for hydrofluoric acid , HF , is 7.20×10-4 .
Write the equation for the reaction that goes with this equilibrium constant.
(Use H3O+ instead of H+.)
The following equation can be used to depict the dissociation of hydrofluoric acid, HF: HF + [tex]H_{2}O[/tex] → [tex]H_{3}O^{+}[/tex] + [tex]F^{-}[/tex]
What is the name of the Ka equation?The equilibrium constant of an acid's dissociation reaction or when an acid dissociates is known as or called the acid dissociation constant, or Ka. The strength of an acid in a solution is numerically represented or estimated by this equilibrium constant.
How can Ka be determined from a reaction?We shall first ascertain the pKa of the solution before calculating the Ka. The pH of the solution and the pKa of the solution are equal at the equivalence point. As a result, we can rapidly calculate the value of Ka using a titration curve and the equation Ka = - log pKa.
To learn more about equilibrium constant visit:
brainly.com/question/10038290
#SPJ1
The value of Ka for hydrofluoric acid , HF , is 7.20×10-4. Write the equation for the reaction that goes with this equilibrium constant.
(Use H3O+ instead of H+.)
What would be the major product of the following reaction? i) NaBH4 ii) NaH, Et20 A O=S=0 OCH2CH3 1) CH3CH2OCH(CH3)CH2CH2CH2CH3 II) (CH3CH20)2CHCHOHCH2CH2CH3 III) (CH3CH2)2CHOHCH2CH2CHOHCH3 IV) CH3OCH(C2H5)CH2CH2CH2CH3 V CH3CH2CH(OCH3)CH2CH2CHOHCH3
The major product of the reaction with reagents i) NaBH₄ and ii) NaH, Et₂0 is III) (CH₃CH₂O)₂CHCHOHCH₂CH₂CH₃.
In this reaction, we have two steps. First, NaBH₄ reduces the carbonyl group of the original compound A (an ester) to an alcohol. The reduction proceeds through a hydride transfer from the borohydride to the carbonyl carbon, resulting in an alkoxide intermediate, which subsequently picks up a proton to form the alcohol.
In the second step, NaH (a strong base) deprotonates the newly formed alcohol, forming an alkoxide anion.
The alkoxide then undergoes an intramolecular nucleophilic attack on the sulfur atom of the remaining ester group in a 5-membered ring transition state, leading to the formation of the final product III) (CH₃CH₂O)₂CHCHOHCH₂CH₂CH₃ through an S₃N-type reaction mechanism.
To know more about nucleophilic attack click on below link:
https://brainly.com/question/31279781#
#SPJ11
a buffer contains 0.15 mol of propionic acid (c2h5cooh ka = 1.3 × 10−5) and 0.10 mol of (nac2h5coo) in 1 l. (a) what is the ph of this buffer?
The pH of a buffer containing 0.15 mol of propionic acid and 0.10 mol of sodium propionate in 1 L is approximately 4.59.
To find the pH of the buffer solution containing 0.15 mol of propionic acid (C₂H₅COOH, Ka = 1.3 × 10⁻⁵) and 0.10 mol of sodium propionate (NaC₂H₅COO) in 1 L, you can use the Henderson-Hasselbalch equation:
pH = pKa + log ([A⁻] / [HA])
Here, pKa = -log(Ka) and [A⁻] is the concentration of the conjugate base (sodium propionate), and [HA] is the concentration of the weak acid (propionic acid).
First, let's calculate the pKa:
pKa = -log(1.3 × 10⁻⁵) ≈ 4.89
Now, plug in the concentrations of the weak acid and its conjugate base:
pH = 4.89 + log(0.10 / 0.15)
pH = 4.89 + log(2/3) ≈ 4.59
Therefore, the pH of the buffer solution is approximately 4.59.
Learn more about Henderson-Hasselbalch equation here: https://brainly.com/question/26746644
#SPJ11
Classify each of the following reactants and products as an acid or base according to the Bronsted theory: hno3 + (ch3)3co (ch3)3coh + no3 HN03 (CH3)3Co (ch3)3coh no3
HNO3 is an acid, (CH3)3CO is a base, (CH3)3COH is a conjugate acid, and NO3^- is a conjugate base according to the Bronsted theory.
According to the Bronsted theory, an acid is a substance that donates a proton (H+) and a base is a substance that accepts a proton (H+). Let's classify each reactant and product in the given reaction: HNO3 + (CH3)3CO ⇌ (CH3)3COH + NO3^-
1. HNO3 (nitric acid): It donates a proton (H+) to the other reactant, so it is an acid according to the Bronsted theory.
2. (CH3)3CO (tert-butoxide ion): It accepts a proton (H+) from HNO3, so it is a base according to the Bronsted theory.
3. (CH3)3COH (tert-butanol): It is formed after the base (CH3)3CO accepts a proton, so it can be considered as the conjugate acid of the base (CH3)3CO.
4. NO3^- (nitrate ion): It is formed after the acid HNO3 donates a proton, so it can be considered as the conjugate base of the acid HNO3.
Learn more about Bronsted theory here, https://brainly.com/question/15516010
#SPJ11
draw the two possible enols that can be formed from 3-methyl-2-butanone:
CH₂=C(OH)CH(CH₃)CH₃ and CH₃C(OH)=CHCH(CH₃)₂ can be formed from 3-methyl-2-butanone.
Step 1: Start with the structure of 3-methyl-2-butanone. It has the formula: CH₃C(O)CH(CH₃)CH₃.
Step 2: Identify the alpha carbons. These are the carbons directly adjacent to the carbonyl carbon (C=O). In this case, there are two alpha carbons: one is bonded to the CH₃ group, and the other is bonded to the CH(CH₃)₂group.
Step 3: Remove a hydrogen from each of the alpha carbons and replace the carbonyl bond (C=O) with a double bond between the alpha carbon and the oxygen (C-OH).
Enol 1: CH₂=C(OH)CH(CH₃)CH₃
Enol 2: CH₃C(OH)=CHCH(CH₃)₂
These are the two possible enols that can be formed from 3-methyl-2-butanone.
To learn more about enol https://brainly.com/question/27749729
#SPJ11
1. For parts of the free response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. Answer the following questions related to CO2. 30-C=0 0=c=0 Diagram X Diagram z (a) Two possible Lewis electron-dot diagrams for CO2 are shown above. Explain in terms of formal charges why diagram 2 is the better diagram. (b) Identify the hybridization of the valence orbitals of the Catom in the CO2 molecule represented in diagram 2 (c) A 0.1931 mol sample of dry ice, CO2(s), is added to an empty balloon. After the balloon is sealed, the CO2(8) sublimes and the CO2(g) in the balloon eventually reaches a temperature of 21.0°C and pressure of 0.998 atm. The physical change is represented by the following equation. CO2(8) + CO2(9) AHyublimation =? (1) What is the sign (positive or negative) of the enthalpy change for the process of sublimation? Justify your answer. (11) List all the numerical values of the quantities, with appropriate units, that are needed to calculate the volume of the balloon. (iii) Calculate the final volume, in liters, of the balloon.
V = Vf Vi = 18 cm3 18000 cm3 = 17982 cm3, for example. Since the volume in the final state is less than the volume in the starting state, the change is negative.
(a) Because K is in the fourth period whereas Na is in the third, K has a substantially higher atomic radius (280 pm vs. 227 pm). K has a bigger size since it has an additional shell.
(b) Because the K+ ion is significantly more stable than the Ca+ ion, the first-ionization energy of K is lower than that of Ca. K has the following electronic configuration: 1s2 2s2 2p6 3s1. The cation achieves the stable structure of a noble gas after losing an electron.
(c) The brittle, ionic compound Na2O also has the formula M2O. This is true because potassium and sodium are both members of the same periodic table group. They are chemically similar since they both have valency+1.
(d) The chemist has the ability to identify the substance in the sample. The chemist can determine the mass of K in the sample using elemental analysis because he is aware of its mass. The ratio of K to O in the sample can then be calculated, and it can be compared to ratios of K2O or K2O2.
To know more about electronic configuration, click here:
https://brainly.com/question/29757010
#SPJ4
write the formula of three different lewis acids
Answer:
AlCl3 / SO2 / NO2
Explanation:
Lewis acid are species that have lack of electrons
Consider the reaction: 2H2O(l)2H2(g) + O2(g) Using standard absolute entropies at 298K, calculate the entropy change for the system when 2.21 moles of H2O(l) react at standard conditions. S°system = ?J/K
The entropy change for the system when 2.21 moles of H2O(l) react at standard conditions is 538.1 J/K.
The entropy change of the system can be calculated using the standard molar entropies of the reactants and products:
ΔS° = ΣnS°(products) - ΣmS°(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and S° is the standard molar entropy.
For the given reaction:
2H2O(l) → 2H2(g) + O2(g)
The standard molar entropies at 298K are:
S°(H2O,l) = 69.91 J/mol·K
S°(H2,g) = 130.68 J/mol·K
S°(O2,g) = 205.03 J/mol·K
Using the equation above, we can calculate the entropy change of the system:
ΔS° = 2 × S°(H2,g) + S°(O2,g) - 2 × S°(H2O,l)
ΔS° = 2 × 130.68 J/mol·K + 205.03 J/mol·K - 2 × 69.91 J/mol·K
ΔS° = 243.57 J/mol·K
The reaction involves the conversion of 2.21 moles of water, so the entropy change for the system will be:
S°system = ΔS° × n = 243.57 J/mol·K × 2.21 mol = 538.1 J/K
learn more about entropy change here:
https://brainly.com/question/30691597
#SPJ11
Draw the major organic products of this reaction, showing any nonzero formal charges. Then answer the question that follows.
1. NaOH 2. CH3CH2Br 3. H30, heat NH
There are two parts to this question. Both are required.
Draw the product with the higher molecular weight here:
Draw the product with the lower molecular weight here:
The products of the given SN2 reaction are ethyl alcohol (CH3CH2OH) and bromide ion (Br-). Ethanol has a higher molecular weight of 46 g/mol compared to the lower molecular weight of Br- which is 80 g/mol.
The given reaction is an SN2 reaction between ethyl bromide (CH3CH2Br) and hydroxide ion (OH-) followed by protonation with H3O+ under heat. The mechanism and products are:
Step 1: The nucleophilic OH- attacks the electrophilic carbon of the ethyl bromide to displace the bromide ion and form the intermediate alkoxide.
CH3CH2Br + NaOH → CH3CH2O- Na+ + Br-
Step 2: The alkoxide ion is protonated by the acidic H3O+ to give the alcohol product.
CH3CH2O- + H3O+ → CH3CH2OH + H2O
The product with the higher molecular weight is CH3CH2OH (ethanol) with a molecular weight of 46 g/mol. The product with the lower molecular weight is Br- with a molecular weight of 80 g/mol.
Therefore, the answer is:
Draw the product with the higher molecular weight here: CH3CH2OH
Draw the product with the lower molecular weight here: Br-
learn more about ethyl alcohol here:
https://brainly.com/question/29153788
#SPJ11
The equilibrium constant for the gas phase reaction N2(g) + 3H2(g) <---> 2NH3(g) is Keq = 4.34x10^-3 at 300 degrees Celsius. At equilibrium
a) products predominate
b) roughly equal amounts of products and reactants are present
c) only products are present
d) only reactants are present
e) reactants predominate
Okay, let's break this down step-by-step:
The equilibrium constant, Keq, indicates the ratio of products to reactants at equilibrium.
A Keq of 4.34x10^-3 means the products (2NH3) will predominate, but the reactants (N2 and 3H2) will still be present.
So the options are:
a) products predominate - Correct. The products predominate since Keq > 1.
b) roughly equal amounts of products and reactants are present - Incorrect. For Keq = 4.34x10^-3, the amounts of products and reactants will not be equal.
c) only products are present - Incorrect. There will still be some reactants at equilibrium.
d) only reactants are present - Incorrect. There will be some products formed at equilibrium.
e) reactants predominate - Incorrect. The products will predominate.
Therefore, the correct option is:
a) products predominate
Let me know if this makes sense! I can provide more details or explanations if needed.
At 25 Celsius does hydrogen or nitrogen have the greater velocity?
Answer:
hydrogen.
Explanation:
write out symbolic solution aluminum temperature as a function of time
"T(t) = T0 + (Q/k) * t" this equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
To write out a symbolic solution for the temperature of aluminum as a function of time, we can use the following terms:
- T(t): temperature of aluminum at time t
- T0: initial temperature of aluminum
- k: thermal conductivity of aluminum
- t: time
- Q: heat transferred
The temperature of aluminum as a function of time can be represented using the heat equation. In a simplified form, the equation can be written as:
T(t) = T0 + (Q/k) * t
This equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
Visit here to learn more about thermal conductivity : https://brainly.com/question/23897839
#SPJ11
"T(t) = T0 + (Q/k) * t" this equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
To write out a symbolic solution for the temperature of aluminum as a function of time, we can use the following terms:
- T(t): temperature of aluminum at time t
- T0: initial temperature of aluminum
- k: thermal conductivity of aluminum
- t: time
- Q: heat transferred
The temperature of aluminum as a function of time can be represented using the heat equation. In a simplified form, the equation can be written as:
T(t) = T0 + (Q/k) * t
This equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
Visit here to learn more about thermal conductivity : https://brainly.com/question/23897839
#SPJ11
calculate the amount of heat, in calories, that must be added to warm 61.8 g of ethanol from 20.6 °c to 54.8 °c. assume no changes in state occur during this change in temperature.
heat added: __ cal Calculate the amount of heat, in calories, that must be added to warm 88.7 g of ethanol from 18.9 °C to 55.9 °C. Assume no changes in state occur during this change in temperature. heat added: __
Calculate the amount of heat, in calories, that must be added to warm 88.7 g of wood from 18.9°C to 55.9 °C. Assume no changes in state occur during this change in temperature. The table lists the specific heat values for brick, ethanol, and wood. Specific Heats of Substances Substance Specific Heat (cal/g C)
Brick 0.20
Ethanol 0.58
Wood 0.10 Calculate the amount of heat, in calories, that must be added to warm 88.7 g of brick from 18.9 °C to 55.9 °C. Assume no changes in state occur during this change in temperature. heat added: __
Heat added (wood) = 88.7 g x 0.10 cal/g°C x 37°C = 327.19 cal.
Heat added (brick) = 88.7 g x 0.20 cal/g°C x 37°C = 654.38 cal.
To calculate the amount of heat added to warm 61.8 g of ethanol from 20.6°C to 54.8°C, use the formula:
Heat added (cal) = mass (g) x specific heat (cal/g°C) x change in temperature (°C)
For ethanol, the specific heat is 0.58 cal/g°C. The change in temperature is 54.8°C - 20.6°C = 34.2°C.
Heat added = 61.8 g x 0.58 cal/g°C x 34.2°C = 1221.36 cal.
To find the heat added to warm 88.7 g of wood and 88.7 g of brick from 18.9°C to 55.9°C, use the same formula. For wood, specific heat is 0.10 cal/g°C; for brick, it's 0.20 cal/g°C. The change in temperature is 55.9°C - 18.9°C = 37°C.
To know more about specific heat click on below link:
https://brainly.com/question/11297584#
#SPJ11
True or False? the 1h nmr spectrum of this compound −60°c shows a peak at 7.6 ppm, this would indicate aromaticity.
The 1H NMR spectrum of this compound −60°C shows a peak at 7.6 ppm, this would indicate aromaticity - True.
Nuclear magnetic resonance is used in proton nuclear magnetic resonance (proton NMR, hydrogen-1 NMR, or 1H NMR), which uses hydrogen-1 nuclei inside a substance's molecules to determine the structure of those molecules. Almost all of the hydrogen in samples containing natural hydrogen (H) is the isotope 1H (hydrogen-1; that is, hydrogen with a proton for a nucleus).
Solvent protons must not be permitted to obstruct the recording of simple NMR spectra since they are done in solutions. Deuterated solvents, such as deuterated water, D2O, deuterated acetone, (CD3)2CO, deuterated methanol, CD3OD, deuterated dimethyl sulfoxide, (CD3)2SO, and deuterated chloroform, CDCl3, are favoured for use in NMR. Deuterium, or 2H, is typically represented by the letter D. However, a non-hydrogen solvent, such as carbon tetrachloride (CCl4) or carbon disulfide, CS2, may also be used.
Learn more about 1H NMR spectrum:
https://brainly.com/question/30583972
#SPJ4
Draw all of the expected products for each of the following solvolysis reactions: Get help answering Molecular Drawing questions. X Your answer is incorrect. Try again. (a) Br ? E1OH heat Edit Get help answering Molecular Drawing questions. X Your answer is incorrect. Try again. (b) ? Hо heat CI (c) Br ? МеОн heat Edit Get help answering Molecular Drawing questions. Your answer is incorrect. Try again. (d) CI ? МеОн heat Edit
(a) The solvolysis reaction of Br with E1OH in the presence of heat will result in the formation of two products - 1-bromoethanol and hydrogen bromide (HBr). The molecular drawing of the products is:
CH2OH-CH2Br + HBr
(b) The solvolysis reaction of Cl with H2O in the presence of heat will result in the formation of two products - 2-chloroethanol and hydrogen chloride (HCl). The molecular drawing of the products is:
CH3-CH(OH)-Cl + HCl
(c) The solvolysis reaction of Br with MeOH in the presence of heat will result in the formation of two products - methyl bromide and methanol. The molecular drawing of the products is:
CH3Br + CH3OH
(d) The solvolysis reaction of Cl with MeOH in the presence of heat will result in the formation of two products - methyl chloride and methanol. The molecular drawing of the products is:
CH3Cl + CH3OH
Learn more about solvolysis reaction here:
https://brainly.com/question/21796580
#SPJ11
HCl and zinc are added to the tube in order to detect the presence of O nitrites O nitrous oxide O nitrates
When HCl and zinc are added to a test tube, it is typically done to detect the presence of nitrites (NO₂⁻) in the sample. The reaction between zinc and HCl generates hydrogen gas, which then reduces any nitrites present to form nitrogen gas (N₂). The production of nitrogen gas can be observed as bubbles, indicating the presence of nitrites in the sample.
HCl and zinc are added to the tube in order to detect the presence of nitrites (NO2-). When nitrites are present, they react with HCl and zinc to form a pink color solution, indicating the presence of nitrites. However, HCl and zinc are not effective in detecting the presence of nitrous oxide (N2O) or nitrates (NO3-). Other methods, such as chemiluminescence, are used to detect the presence of these compounds.
When HCl and zinc are added to a test tube, it is typically done to detect the presence of nitrites (NO₂⁻) in the sample. The reaction between zinc and HCl generates hydrogen gas, which then reduces any nitrites present to form nitrogen gas (N₂). The production of nitrogen gas can be observed as bubbles, indicating the presence of nitrites in the sample.
To learn more about nitrites, click here:
brainly.com/question/30466459
#SPJ11
Calculate the pH of a solution that is 0.065 M in potassium propionate (C2H5COOK or KC3H5O2) and 0.090 M in propionic acid (C2H5COOH or HC3H5O2).
Calculate the pH of a solution that is 0.070 M in trimethylamine, (CH3)3N, and 0.13 M in trimethylammonium chloride, ((CH3)3NHCl).
Calculate the pH of a solution that is made by mixing 50.0 mL of 0.14 M acetic acid and 50.0 mL of 0.23 M sodium acetate.
The solution has a pH of 5.42. This means that the solution is slightly acidic, with a pH that is lower than 7.0.
The pH of a solution made by mixing 50.0 mL of 0.14 M acetic acid and 50.0 mL of 0.23 M sodium acetate can be calculated by using the Henderson-Hasselbalch equation.
The equation states that pH = pKa + log([salt]/[acid]), where pKa is the acid dissociation constant of acetic acid and [salt] and [acid] are the concentrations of sodium acetate and acetic acid, respectively.
Since the concentration of acetic acid is 0.14 M and the concentration of sodium acetate is 0.23 M, the pH of the solution can be calculated as follows: pH = 4.76 + log(0.23/0.14) = 5.42.
Know more about pH here
https://brainly.com/question/15289741#
#SPJ11
When 50 mL (50 g) of 1.00 M HCl at 22 degrees Celsius is added to 50 mL (50 g) of 1.00 M NaOH at 22 degrees Celsius in a coffee cup calorimeter, the temperature increases to 28.87 degrees Celsius. How much heat is produced by the reaction between HCl and NaOH? (The specific heat of the solution produced is 4.18 J/g°C.)
The heat produced by the reaction between HCl and NaOH is 2874.46 Joules.
How to determine the heat produced by reaction?To know how much heat is produced by the reaction between 50 mL (50 g) of 1.00 M HCl at 22 degrees Celsius and 50 mL (50 g) of 1.00 M NaOH at 22 degrees Celsius in a coffee cup calorimeter, given that the temperature increases to 28.87 degrees Celsius and the specific heat of the solution produced is 4.18 J/g°C.
To calculate the heat produced (q) by the reaction, we will use the following formula:
q = mass x specific heat x change in temperature
Step 1: Determine the mass of the solution
The mass of the solution is the sum of the mass of HCl and the mass of NaOH:
mass = 50 g + 50 g = 100 g
Step 2: Determine the change in temperature
The change in temperature is the final temperature minus the initial temperature:
ΔT = 28.87°C - 22°C = 6.87°C
Step 3: Calculate the heat produced
Now, we can use the formula to calculate the heat produced:
q = mass x specific heat x change in temperature
q = 100 g x 4.18 J/g°C x 6.87°C
q = 2874.46 J
To know more about Specific Heat:
https://brainly.com/question/14225113
#SPJ11