Answers
Answer:
you did not show the whole page
Explanation:
Related Questions
Help please !
A
B
C
D
Answers
Answer:
the answer is letter B. the entropy
:answer question number 8
Answers
Answer:
Weight
Explanation:
Weight changes because the moon's gravity is different from the Earth's. Mass is always the same. Volume remains the same. Density also remains the same. Hope my answer is correct! If there is a lot of explanation, you can give a brainliest to my answer.
Unlike particles in a liquid or a gas, the particles in a typical solid are arranged
A. separately from one another in constantly changing positions
B. in close contact with one another and in constantly changing positions
C. randomly in fixed positions
D. in orderly patterns and fixed positions
Answers
Answer:
D. In orderly patterns and fized positions
Explanation:
In your OWN WORDS, describe what the “Law of Conservation of Energy” is.
Answers
Objects with more (less or more) molecules have
heat energy than objects with (greater or fewer)
molecules? fill in the blanks
Answers
Because the more molecules the more heat is produced.
what is the soul of water?
Answers
Answer:
soul eater is a social enterprise
Explanation:
they donate a minimum of 10 percent to the soul community . soul water was born from the idea that everyone should be able to enjoy quality drinking tap water
What type of reaction would NI3+ ->lead to?
Answers
Answer:
Reduction potential (Eo) is defined as a tendency of a chemical species to be reduced by gaining an electron and is defined with electrochemical reference of hydrogen, which is globally given the reduction potential of zero [24].
Explanation:
someone help me please i’ll give brainly
Answers
Answer:
solid
liquid
Gas
plasma
Highest to lowest energy : plasma, gas, liquids, solids
Use the drop-down menus to identify the order of these images for the formation of our solar system.
Answers
Answer:
Explanation:
The periodic table organizes elements according to INCREASING
A)
atomic mass.
B)
energy level
C)
atomic number
D)
valence number
Answers
Answer:
C)
atomic number
Explanation:
C)
atomic number is also the number of protons an atom has and this number will never change unlike number of neutrons or electrons.
when an atom loses electrons, what does it become?
Answers
As you were climbing a a mountain, you noticed that rocks were crumbling below your feet and moving down the mountain. What two processes did you observe?
Answers
Answer:
Weathering and erosion
Explanation:
Weathering can be explained as the breaking down of rocks/minerals on the surface of the Earth as a result of contact with biological organism, water, air and other factors
. There are 3 common types of weathering which are;
1) physical weathering
2) biological weathering
3) chemical weathering
Erosion can be regarded as a geological process, whereby earthen material are been transported away by natural forces, these forces could be wind as well as water.
Therefore, as you were climbing a a mountain, you noticed that rocks were crumbling below your feet and moving down the mountain. What is observed are weathering and erosion processes.
After the weakening and broken up of the rock by weathering then erosion transport the bit of the rock down the mountain as you are climbing, which means the "weathering process" breakdown and the "erosion process" involves the transport or movement of the bit of the rocks
how many significant figures are in 0.00970 g?
Answers
Answer:
3
Explanation:
begining 0's are never significant
all numbers 1-9 are always significant
ending 0's are only significant when there is
a decimal.
1 of 101 of 10 Items
00:04 / 30:00
Assessment started: Unit 3 Exam-Retest.
Item 1
If pressure is constant, how is the volume of a gas related to its temperature?
Answers
Answer:
A
Explanation:
Trust me i just did this :)
What is the chemical equation( formula ) of the reaction of photosynthesis
Answers
Answer:
The process of photosynthesis is commonly written as: 6CO2 + 6H2O → C6H12O6 + 6O2.
Explanation:
This means that the reactants, six carbon dioxide molecules and six water molecules, are converted by light energy captured by chlorophyll (implied by the arrow) into a sugar molecule and six oxygen molecules, the products.
Which of these could create static electricity?
A.Plugging in a vacuum
B.Running a blender
C.Combing one's hair
D.Turning on a car
Answers
c well actually I remember being tought this but I cant remember it 100
Because it’s like when you rub a ballon on your hair and your hair becomes static. And because if you look at the other options and do process of elimination you would get C.
A- that’s just electricity from a plug in
B- same thing as A
And
D- that’s with a engine and gas
(Hopefully this helped.)
And from google “Using plastic combs and brushes on your hair can cause static electricity, much like that old trick you did as a kid of making your hair stand up by rubbing a plastic balloon on it.”
i need help people :0
Answers
How much water (H2O ) would form if 4.04 g of hydrogen (H2) reacted with 31.98 g of oxygen (O2 )?
(2H2 + O2 2H2O)
Answers
Answer:
Mass = 36 g
Explanation:
Given data:
Mass of water formed = ?
Mass of hydrogen = 4.04 g
Mass of oxygen = 31.98 g
Solution:
Chemical equation:
2H₂ + O₂ → 2H₂O
Number of moles of hydrogen:
Number of moles = mass/molar mass
Number of moles = 4.04 g/ 2 g/mol
Number of moles = 2.02 mol
Number of moles of oxygen:
Number of moles = mass/molar mass
Number of moles = 31.98 g/ 32 g/mol
Number of moles = 1.0 mol
Now we will compare the moles of water with hydrogen and oxygen.
O₂ : H₂O
1 : 2
H₂ : H₂O
2 : 2
2.02 : 2.02
Number of moles of water formed by oxygen are less thus oxygen will limiting reactant.
Mass of water:
Mass = number of moles × molar mass
Mass = 2 mol × 18 g/mol
Mass = 36 g
please answer this its really fast
In the following balanced equation what is a correct mol ratio? *
1 mol CH4 / 2 mol CO2
1 mol O2 / 1 mol H2O
2 mol CO2 / 3 mol O2
4 mol H2O / 3 mol CH4
Answers
Answer:
ugly
Explanation:
Compare the viscosity property of solid and liquid.
Answers
Answer
There is nothing like viscosity in solid because most of the solids usually have a rigid body. This is due to strong intermolecular forces. And it is due to this strong force between the molecules that they are unable to move and they remain fixed at their position. Some solids such as graphite which have layered structure, don't possess the property of viscosity, because of the strong force between the layers.
Explanation:
Viscosity is the property of a fluid that opposes the relative motion between two surfaces of the fluid that are moving at different velocities. In simple terms, viscosity means friction between the molecules of fluid.
FOR EXAMPLE
water is "thin", having a low viscosity, while vegetable oil is "thick" having a high viscosity
what are most of the needed formulas to find the molar volume and the molar concentration (Cm) 11th grade chemistry
Answers
Answer:
Explanation:
molar volume=moles*given volume
for molar concentration we use two formulas molarity and molality
molarity=no of moles/volume
molality=no of moles/kilogram
Is it possible to view atoms?
Select one:
a. Yes, you can view atoms with the naked eye.
b. Yes, you can view atoms with a light microscope.
c. Yes, you can view atoms with a scanning tunneling microscope.
d. No, it is not possible to view atoms with any kind of microscope.
Answers
Answer:
I think it
C
because you cant view them with a naked eye
You can only see them with a scanning tunneling microscope
The most stable group of elements on the periodic table is the?
A) halogens
B) noble gases
C) alkali earth metals
D) alkaline earth metals
Answers
Answer:
Noble Gases B
Explanation:
The noble gases are the chemical elements in group 18 of the periodic table. They are the most stable due to having the maximum number of valence electrons their outer shell can hold. Therefore, they rarely react with other elements since they are already stable.
Most stable because they have the maximum number of valence electrons their outer shell can hold
Fluorine (F) and bromine (Br) are in the same group on the periodic table. How do atoms of these elements compare when they form bonds?
Both a fluorine atom and a bromine atom lose one electron, and both atoms become stable.
A fluorine atom becomes stable by losing one electron, but a bromine atom cannot become stable by losing only one electron.
Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable.
A fluorine atom becomes stable by gaining one electron, but a bromine atom cannot become stable by gaining only one electron.
Answers
Answer:
Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable.
Explanation:
The two elements compare when they form bonds in that when both a fluorine atom and a bromine atom gain one electron, they both become stable.
Fluorine and bromine are elements called halogens. They both belong to group 7 on the periodic table. When they gain an electron each, they become isoelectronic with a corresponding noble gas. This gives their atom special stability.Answer:
3) Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable
Explanation:i got it right on the quiz
hope this helps
A laboratory hydrogen generator collects the gas produced by bubbling it through water. The total pressure of the gas collected is 751 mmHg. The temperature is 34 °C, at which water vapor pressure is 40.0 mmHg. Calculate the partial pressure of the hydrogen.
Answers
Answer:
[tex]711\ \text{mmHg}[/tex]
Explanation:
[tex]P_{total}[/tex] = Total pressure = 751 mmHg
[tex]P_{water}[/tex] = Vapor pressure = 40 mmHg
[tex]P_{gas}[/tex] = Pressure of gas
The total pressure in a system is given by Dalton's law
[tex]P_{total}=P_{gas}+P_{water}\\\Rightarrow P_{gas}=P_{total}-P_{water}\\\Rightarrow P_{gas}=751-40\\\Rightarrow P_{gas}=711\ \text{mmHg}[/tex]
The partial pressure of the hydrogen is [tex]711\ \text{mmHg}[/tex]
what are the 3 types of bonds in chemistry? and how can you tell when a chemical has that bond?
Answers
Answer:
Ionic bonding, Covalent bonding, Metallic bonding.
» My memory
A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds. » Wikipedia
A gas occupies 3.5L at 2.5 kPa pressure. What is the volume at 100 mmHg at the same temperature? Be sure to
show the setup and the final answer and unit.
Show Your Work
Answers
The volume at 100 mmHg : 0.656 L
Further explanationBoyle's Law
At a constant temperature, the gas volume is inversely proportional to the pressure applied
[tex]\rm p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]
V₁=3.5 L
P₁=2.5 kPa=18,7515 mmHg
P₂=100 mmHg
[tex]\tt \dfrac{18.7515}{100}=\dfrac{V_2}{3.5}\\\\V_2=\dfrac{18.7515\times 3.5}{100}=0.656~L[/tex]
true or false: ur hearts a muscle
Answers
Answer: True
Explanation:
Sodium metal reacts violently with water and chlorine is a toxic gas, yet we eat sodium chloride. Why is this possible? Select one: a. The properties of compounds are different from the properties of the elements that form the compounds.
b. The properties of compounds are identical to the properties of the elements that form the compounds, and we should not eat sodium chloride because it is toxic.
c. The physical properties of compounds are different from the physical properties of the elements that form the compounds, but the chemical properties of the elements and compound are the same.
d. The chemical properties of compounds are different from the chemical properties of the elements that form the compounds, but the physical properties of the elements and compound are the same.
Answers
Answer:
The properties of compounds are different from the properties of the elements that form the compounds.
Explanation:
When elements form compounds, their properties are significantly modified. The physical and chemical properties of compounds and that of the elements that compose them are significantly different.
The introduction of chemical bonds between different atoms in compounds make the compounds to differ from elements where the atoms are bonded to atoms of the same element.
Put the Levels of Organization in order from the simplest (smallest) to the most complex (largest). human, brain, nervous system, nervous tissue, nerve cell
Answers
Answer:
nerve cell, nervous tissue, brain, nervous system, human.
Explanation:
The order is from the simplest to the most complex, within the simplest would be the cellular structure, then the organs come, then systems (a set of organs in multidirectional operation among them) and finally the human, which is a set of systems .