Does static electricity light our homes? True or false

Answers

Answer 1

Answer:

No, false.

Explanation:

You may use it to power a light bulb if you desired. The reason it isn't is because it's inconsistent not predictable.

Answer 2

The static electricity light our homes. This statement is false.

What is static electricity?

When two objects are rubbed, they get charged by friction present into it. Object can also be charged by induction.

The charge gets accumulated on them, due to which spark occurs.

This spark cannot light our homes. As, this has very less magnitude and no continuous flow. There is no complete circuit to get the continuous flow of electricity.

Thus, static electricity can't light our homes.

Learn more about  static electricity.

https://brainly.com/question/12791045

#SPJ2


Related Questions

The volume of an ideal gas is increased from 0.6 m3 to 2.4 m3 while maintaining a constant pressure of 1000 Pa (1000 N/m2). Determine, in J, the amount of work done by the gas in this expansion.

Answers

The amount of work done by the gas in the given expansion is 1800 J.

The given parameters;

initial volume of the ideal gas, V₁ = 0.6 m³final volume of the ideal gas, V₂ = 2.4 m³constant pressure of the gas, P = 1000 Pa

The amount of work done by the gas in the given expansion is calculated as follows;

W = PΔV

where;

ΔV is the change in volume of the gas

Substitute the given parameters and solve for the work done;

W = 1000(2.4  -  0.6

W = 1800 J

Thus, the amount of work done by the gas in the given expansion is 1800 J.

Learn more here:https://brainly.com/question/14978695

Un avión vuela horizontalmente con una velocidad de 800 km/h y deja caer
un proyectil desde una altura de 500 respecto al suelo. a) ¿Cuánto tiempo
transcurre antes de que el proyectil se impacte en el suelo?; b) ¿Qué distancia
horizontal recorre el proyectil después de iniciar su caída?

Answers

The projectiles launch allows to find the results for the questions of the launch of the bomb are:

     a) The fall time is: t = 10.1 s

     b) The distance traveled is: x = 2.24 10³ m

Projectile launching is an application of kinematics where the acceleration on the x-axis is zero and the acceleration on the y-axis is gravity acceleration.

a) Let's find the time until we reach the ground.

The initial vertical velocity is zero, the initial height is I = 500 m, when reaching the ground its height y = 0.

        [tex]y = y_o + v_o_y - \frac{1}{2} g t^2[/tex]  

        0 = y₀ + 0 - ½ g t²

        t = [tex]\sqrt{\frac{2y_o}{g}[/tex]  

        t = [tex]\sqrt{\frac{2 \ 500}{9.8} }[/tex]  

        t = 10.1 s

b) We look for the horizontal distance traveled.

Let's reduce to the international measurement system (SI).

       v = 800 km / h ([tex]\frac{1000m}{1km}[/tex]) ([tex]\frac{1h}{3600s}[/tex]) = 222.22 m / s

       x = vₓ t

       x = 22.22 10.1

       x = 2.24 10³ m

In conclusion, using the projectile launch relationships, we can find the results for the questions that are:

     a) The fall time is: t = 10.1 s

     b) The distance traveled is: x = 2.24 10³ m

Learn more here: brainly.com/question/6287497

Pls help need asap thank u!

Answers

Answer:

c

Explanation:

What element is chemically similar to carbon

Answers

nonmental

that should be the answer

A spring of spring constant k = 200 N m−1 is slowly extended from an extension of 3.0 cm to an extension of 5.0 cm. Calculate the work done by the extending force. 60

Answers

Answer:

31

Explanation:

No need

The correct answer is 31 I did it

PLEASE ANSWER ASAP IM GONNA MARK AS BRAINLIEST

What is the value of the force measured by the spring balance? ​

Answers

Spring balance is a mechanical device used for measuring the weight or force of an object by opposing the force of gravity with the force of an extended spring. The principle behind its working is the principle of Hooke's law.

Ex 3) A tennis player lobs the tennis ball up in the air during a serve at a rate 3 m/s.
How long will it take the tennis ball to reach its maximum height?

Answers

10 seconds is the time it will take to reach maximum height

*Sorry for the bad quality picture!*

A frictionless pendulum with a mass of 0.4 kg and a length of 2.1 m starts at point A, at an angle 0 of 60°. As it swings downward, it passes through point B, which is 30 degrees from equilibrium. What is the kinetic energy of the pendulum at point B?

A) 3.9 J

B) 3.0 J

C) 1.1 J

D) 4.1 J

Answers

The conservation of mechanical energy allows finding the result for the speed of the pendulum when it is at 30º is:

       

The speed is: 3.88 m / s

The conservation of mechanical energy is a theorem of greater importance in physics and ordinary life, it states that if there is no friction force the total mechanistic energy remains constant at all points.

Mechanical energy is the sum of kinetic energy plus all potential energies. In the attachment we see a diagram of the pendulum's movement at the two points of interest.

They indicate that the pendulum is released from an initial angle of θ₁ = 60º, let's find the mechanical energy at that point.

      Em₀ = U = m g h

Where the height is measured from the lowest point of the movement.

      h = L - L cos tea1 = L (1 cos tea1)

The second point of interest occurs for θ₂ = 30º.

At this point part of the energy is indica and part gravitational potential.  

     [tex]Em_f[/tex]  = K + U₂

      [tex]Em_f[/tex] = ½ m v² + m g h ’

There is no friction in the system, therefore mechanical energy is conserved.

       Em₀ = Em₀_f

       mg L (1 - cos θ₁) = ½ m v² + m g L (1 - cos θ₂)

       v² = 2g L (cos θ₂ - cos θ₁)

Let's calculate.

   

       v² = 2 9.8 2.1 (cos 30 - cos 60)

       v² = 41.16 0.366

       v = 3.88 m / s

In conclusion using the conservation of mechanical energy we can find the result for the speed of the pendulum when it is at 30º is:

       

The speed is: 3.88 m / s

Learn more here: brainly.com/question/14688403

Answer:

3.0 J

Explanation:

Just took the test

define potential difference as used in electricity​

Answers

Answer:

Explanation:

Testing answer please do not delete

the diffrence in potential betwen two points that represents the work involved or the energy relesed in the transfe of a unit quantity of electicity from one point to the other

ALREADY SOLVED Thank you for looking.

Answers

what nonsense you are say it have been solved when why did you put

Answer:

yes

Explanation:

10. Unless a light ray comes into contact with a surface or enters a different material, it
travels in a

Answers

Answer:

Straight Path

When converted to a household measurement, 9 kilograms is approximately equal to a

Answers

Answer:

D) 19.8 lbs

Explanation:

1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.

1kg is also equal to 2.205 lbs. 9*2.205=19.8416

9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system

a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.

This leaves us with 19.8 lbs

What process makes this pattern on the ocean floor?

Answers

Plate tectonics


and the ocean floor
Bathymetry, the shape of the ocean floor, is largely a result of a process called plate tectonics.

please give me brainliest

When converted to a household measurement, 9 kilograms is approximately equal to a

Answers

Ificicicucuivvicicicucucucu

Answer:

D) 19.8 lbs

Explanation:

1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.

1kg is also equal to 2.205 lbs. 9*2.205=19.8416

9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system

a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.

This leaves us with 19.8 lbs

A 23 g bullet traveling at 230 m/s penetrates a 2.0 kg block of wood and emerges cleanly at 170 m/s. If the block is stationary on a surface with a coefficient of kinetic friction of 0.15 when hit, how far does it move after the bullet emerges?

Answers

The distance traveled by the wood after the bullet emerges is 0.16 m.

The given parameters;

mass of the bullet, m = 23 g = 0.023 gspeed of the bullet, u = 230 m/smass of the wood, m = 2 kgfinal speed of the bullet, v = 170 m/scoefficient of friction, μ = 0.15

The final velocity of the wood after the bullet hits is calculated as follows;

[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\0.023(230) + 2(0) = 0.023(170) + 2v_2\\\\5.29 = 3.91 + 2v_2\\\\2v_2 = 1.38\\\\v_2 = \frac{1.38}{2} = 0.69 \ m/s[/tex]

The acceleration of the wood is calculated as follows;

[tex]\mu = \frac{a}{g} \\\\a = \mu g\\\\a = 0.15 \times 9.8\\\\a = 1.47 \ m/s^2[/tex]

The distance traveled by the wood after the bullet emerges is calculated as follows;

[tex]v^2 = v_0^2 + 2as\\\\v^2 = 0 + 2as\\\\v^2 = 2as\\\\s = \frac{v^2}{2a} \\\\s = \frac{(0.69)^2}{2(1.47)} \\\\s = 0.16 \ m[/tex]

Thus, the distance traveled by the wood after the bullet emerges is 0.16 m.

Learn more here:https://brainly.com/question/15244782

A person is driving a car in a roundabout at 20 m/s so that its centripetal acceleration is 5 m/s2 . How much time it takes to complete 1 circle around the roundabout?

Answers

Answer:

Ac = v²/r

where, Ac is centripetal acceleration

v is velocity

r is radius

5 = (20)²/r

r = 400/5

r = 80m

from,

w = 2πf

where, w = angular velocity and f frequency

w = v/r

f = n/T

then,

v = 2πrn ,n = 1 to complete 1 cycle

T

T = 2πr/v

T = 2π*80/20

T = 25.14seconds.

The car would take 25.14s to complete 1 cycle of the roundabout.

A__________ shows how velocity changes over time

Answers

Velocity time graph goes into the blank hope it helps please mark me brainliest

1) A bowling has a mass of 5 kg and a speed of 8 m/s. What is its momentum?
2) If the bowling ball started from a momentum of O and reached a momentum of 40
kg*m/s in 2 seconds. What is the impulse impacted on the bowling ball?
3) What is the force of impact for the 2 seconds?

Answers

Hgihucycyvyvuvuvuvuvuvuvuvvuvuvuv

A machine whose efficiency is 75% is used to lift a load of 100m.calculate the effort put into the machine if it has a velocity ratio of 4.

Answers

Explanation:

M.A = load / Effort

efficiency = M.A/V.R X 100

75 = M.A / 4 X 100

75 = 25 X M.A

M.A = 75/25 = 3

M.A = load / effort

3 = 100/E

E = 100/3 = 33.333

A machine whose efficiency is 75% is used to lift a load of 100m. the effort needed to put into the machine is 33.33 meters if the velocity ratio is 4.

What is the mechanical advantage?

Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.

Mechanical advantage = output force(load) /input force (effort)

Simple machines like static pulleys, as well as a movable pulleys, provide a great amount of mechanical advantage.

A machine whose efficiency is 75% is used to lift a load of 100m.calc if it has a velocity ratio of 4.

As we know that the mechanical advantage of a machine is equal to the product of its efficiency and velocity ratio.

mechanical advantage  = velocity ratio   ×Efficiency

       =4 × 0.75

       = 3

The mechanical advantage is 3 , which means the ratio of load to effort is 3

load / effort = 3

100 m/effort =3

effort = 33.33 m

Thus, the effort put into the machine comes out to be 33.33 m.

Learn more about Mechanical advantages, here

https://brainly.com/question/16617083

#SPJ5

Based on your observations, what can you say about your prediction in Parts A and B above concerning the potential and kinetic energy?

Answers

Answer:

Explanation:

My perdiction was correct. I predicted in Part A that the Kinetic Energy would increase. In Part B I predicted that the potential energy would decrease due to the kinetic energy increasing.

Someone help this is a test and i need to finish this quick i will give brainliest of it lets me

Answers

Sorry, I don't know but I think the correct answer is the first option.

4. What is the density of a block with a mass of 36 g and a volume of 9 cm?
O A 45 g/cm3
O B.27 g/cm
O 0.4 g/cm
O D. 0.25 g/cm

Answers

Answer:

0.4 g/cm

Explanation:

density (g cm ³) = mass (g)

÷

volume (cm³)

Answer:

C. 4 g/cm

Explanation:

Use the formula:

density = mass ÷ volume

mass = 36volume = 9

Sub in the values:

density = 36 ÷ 9 = 4 g/cm

Answer = 4 g/cm

Ex 1) A Major League baseball pitcher throws a baseball straight up into the air and the ball travels for 4
seconds reaching a height of 52 m before returning to the pitchers hand exactly at the height that he released
it. With what velocity does the baseball strike the pitchers hand on the way back down?

Answers

Answer:

52 / 4 = 13 m/s

Explanation:

Ex 3) A tennis player lobs the tennis ball up in the air during a serve at a rate 3 m/s.
How long will it take the tennis ball to reach its maximum height?

Answers

Explanation:

s=(v^2-u^2)/2g

=(0-3^2)/2*10

= 0.45m

Suppose a ball is dropped from a building. What is the change of velocity between the first and fifth seconds of its flight

Answers

Answer: 39.2m/s

Explanation:

Due to the free falling body, the acceleration of the ball is 9.8 m/s^2, and its initial velocity is 0 m/s.

V(t) = g*t

The change of velocity from t=1 to t=5:

Delta V = 9.8*(5-1) = 39.2 m/s

10 basic rules of badminton?​

Answers

Explanation:

Rules

A match consists of the best of three games of 21 points.

The player/pair winning a rally adds a point to its score.

At 20-all, the player/pair which first gains a 2-point lead wins that game.

At 29-all, the side scoring the 30th point wins that game.

The player/pair winning a game serves first in the next game.

A badminton match can be played by two opposing players (singles) or four opposing players (doubles).

A competitive match must be played indoors utilising the official court dimensions.

A point is scored when the shuttlecock lands inside the opponent's court or if a returned shuttlecock hits the net or lands outside of the court the player will lose the point.

At the start of the rally, the server and receiver stand in diagonally opposite service courts.

A legal serve must be hit diagonally over the net and across the court.

A badminton serve must be hit underarm and below the server's waist height with the racquet shaft pointing downwards, the shuttlecock is not allowed to bounce. After a point is won, the players will move to the opposite serving stations for the next point.

The rules do not allow second serves.

During a point a player can return the shuttlecock from inside and outside of the court.

A player is not able to touch the net with any part of their body or racket.

A player must not deliberately distract their opponent.

A player is not able to hit the shuttlecock twice.

A 'let' may be called by the referee if an unforeseen or accidental issue arises.

A game must include two rest periods. These are a 90-second rest after the first game and a 5-minute rest after the second game.

Computes average speed when a person walk for 1 minute at speed of 1.5 m/s and another 1 minute at speed of 3.5 m/s along a straight road

Answers

Answer:

2.5 m/s

Explanation:

(60*1.5+60*3.5)/120=2.5

or

(1.5+3.5)/2=2.5

A 3000 kg car stops at a red light, and is rear-ended by a 5000 kg truck traveling at 20m/s. In the collision, the two cars stick together. What is the final speed of the two cars just after the collision in m/s (Numeric Answers only)​

Answers

Explanation:

this is actually not as simple as it sounds here.

quite some energy is lost in the deformation of the bodies of car and truck, and it also needs more energy to get a standing object going than to accelerate an already moving object.

but assuming the simple described circumstances, then the energy and impulse of the moving truck of 5000 kg is transferred to a new combined system of car and truck of now 5000 + 3000 = 8000 kg.

so, the 20m/s inertia energy of the truck is now distributed to the truck/car combination.

since the same energy has to move now more mass, it is clear that the combined speed will be lower.

20×5000 = x×8000

20×5 = x×8

x = 100/8 = 12.5 m/s

that is the resulting speed of the combined truck/car object.

HELPPP


Which of the following statements about friction is FALSE .
1 ) Friction involves objects that are in physical contact .
2) Friction is less if surfaces are very smooth .
3 ) Friction is always in the direction of the motion .
4) Friction is caused by the uneven surfaces of touching objects

Answers

Friction is caused by the uneven surfaces of touching objects

There are 6 foundation of sports and which one you think is the most important?

Answers

I just need the points

Explanation:

But just pick any and say something like "it stans out to me most/more" or "it sounds/looks more intristing to me"

Other Questions
Complete the questionnaire with the correct form of have and the verbs in the box.(Alter/Cut/Deliver/Pierce/Take/Test)How often do you...1_____your hair_____?2_____pizzas______to your house?Have you ever...3______your ears_______?4______your blood pressure_______?When was the last time you...5______your eyesight_______?6______new clothes_______? Ned Douglas owns Neds Blankets. Ned asks you to explain how he should treat the following reconciling items when reconciling the companys bank account.Outstanding checks.select an explanationDeduct from balance per bank2.A deposit in transit.select an explanationAdd to balance per bank3.The bank charged to our account a check written by another company.select an explanationAdd to balance per bank4.A debit memorandum for a bank service charge. 1. What did young Katherine believe about her father?A. He at first wanted Katherine to run the family farm, but later changed his mind.B. He was the smartest man she ever knew, and he had a real gift for math.C. He secretly wanted to be a mathematician, and he regretted becoming a farmer. D. He did not understand Katherine's love of math, but he supported her anyway.__________________________________________________________________2. Why did Katherine, her siblings, and her mother move to Institute, West Virginia, while her father stayed in White Sulphur Springs?A. There was a high school for the children to attend in Institute, but not in White Sulphur Springs.B. Katherine's mother got a job as a school teacher in Institute.C. Her parents divorced just before Katherine was about to begin high school.D. White Sulphur Springs was a dangerous place for the family to live, and Institute was much safer__________________________________________________________________3. What job did Katherine's professor, W.W. Schieffelin Claytor, train her to pursue after she graduated from college?A. research mathematicianB. French teacherC. rocket scientistD. professor of mathematics__________________________________________________________________4. Which statement is one main idea from Chapters 1-3 of You Should Meet Katherine Johnson?A. NACA engineers developed a plane that broke the sound barrier before Katherine began working for the agency in 1953.B. When Katherine Johnson was young, there were fewer opportunities for African Americans to receive an education and find good jobs.C. Katherine Johnson was born and raised in West Virginia, but moved to Virginia when she was an adult.D. Katherine Johnson enjoyed French and even briefly taught the language after she graduated from college.__________________________________________________________________5. Which details from the first three chapters of You Should Meet Katherine Johnson support the main idea that there were fewer opportunities for African Americans to receive an education and find good jobs when Katherine was young?Select the two correct answers.A. Though Katherine graduated with honors with a math degree in 1937, she was not hired to work for NACA until 1953.B. Katherine was hired to work as a "computer," someone who did the math that NACA engineers needed.C. Katherine's father owned a farm and Katherine's mother had been a school teacher.D. Katherine and her siblings had to move 120 miles away in order to attend high school. John worked 40 hours this week. His rate of pay is $12.50 per hour. What is his gross pay? $425 $500 $475 $505 whether a synapse is excitatory or inhibitory is determined by the The following information is available for Water Inc. Date Units Unit Cost January 1, 2020 (beginning inventory) 100 $50.00 Purchases: January 10, 2020 75 52.00 January 15, 2020 150 52.50 January 30, 2020 100 55.00 The company maintains a periodic inventory system. A physical count shows 125 units in stock on January 31. What is (a) ending inventory on January 31, and (b) cost of goods sold for January, using the FIFO inventory method The formula 1/2 bh finds the area of what shape? Can someone please help me write 3 comparison and 3 contrast. About The Notebook(the movie) and the poem a clear midnight I need 3 comparison about this movie and poem and 3 contrast please. mendel believed that the characteristics of plants are determined by the PLEASE ANSWER THIS ROTATIONAL SYMMETRY QUESTION ITS 6TH GRADE I WILL GIVE U THANKS AND BRAINLIEST determine whether WX and YZ are perpendicular,or, neither W(-7,6),X(-6,9)Y(6,3),Z(3,-6) The ____ juice is made with a greater percent of water. Simplify the following expression:2 + 2 2? - Substances like liquid mercury are very ______, but substances like rubber are very _______ pls help me The Most Dangerous Game What does the story suggest is the reason Zaroff looks away from Rainsford's hiding place in the tree even though he knows he is there? Q4. What are the different ways in which human being use rocks ? Top Kwartalan In Indonesian [tex] {5}^{5} = [/tex] 13. The length of a rectangle is 9 cm more than 2 times the width. If the perimeter of the rectangle is 60 cm,what are its dimensions?a. length = 7 cm; width = 23 cmb. length = 5 cm; width = 16 cmC. length = 23 cm; width = 7 cmd. length = 23 cm; width = 16cm what is the current us maternal mortality rate per 100,000 live births annually? Como se dice pescamos en infinitivo