does a reaction occur when aqueous solutions of barium hydroxide and manganese(II) acetate are combined. The net ionic equation for this reaction is:
Write a net ionic equation for the reaction that occurs when aqueous solutions of sodium hydroxide and hydroiodic acid are combined.
Write a net ionic equation for the reaction that occurs when aqueous solutions of hypochlorous acid and potassium hydroxideare combined.
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of phosphoric acid and sodium hydroxideare combined. Assume excess base.acetate and barium hydroxide are combined?

The overall order of the reaction is; 2 + (-1) = 1, The reaction is first order overall.

The overall order of a reaction is the sum of the orders of the reactant concentrations in the rate law.

In this case, the rate law is given as:

rate = k[O3]² [O2]⁻¹

The order of the reaction with respect to [O₃] is 2, because the concentration of [O₃] is raised to the power of 2 in the rate law.

The order of the reaction with respect to [O₂] is -1, because the concentration of [O₂] is raised to the power of -1 in the rate law.

Therefore, the overall order of the reaction is:

2 + (-1) = 1

The reaction is first order overall.

Learn more about rate law.

https://brainly.com/question/30379408

#SPJ4

In this case, Mo3+ is the larger species compared to Mo. This is because Mo3+ has lost three electrons, making its outermost shell of electrons further away from the nucleus than in the neutral Mo atom. This results in an increase in the atomic radius of Mo3+ compared to Mo.

The atomic radius of an element or ion is a measure of the size of its atoms, usually expressed in picometers. It is determined by the distance between the nucleus and the outermost electrons.

When an atom loses electrons, its positive charge increases, resulting in a stronger attraction between the electrons and the nucleus. This increased attraction pulls the electrons closer to the nucleus, reducing the size of the ion.

However, the loss of electrons also leads to an increase in the number of protons compared to the number of electrons, which results in an overall decrease in the effective nuclear charge experienced by each electron, leading to an expansion of the electron cloud and thus an increase in the atomic radius.

Therefore, in the case of Mo and Mo3+, Mo3+ is the larger species due to the expansion of its electron cloud.

To know more about nucleus refer here:

https://brainly.com/question/19789552#

#SPJ11

The Ka for 0.764 mol of a weak acid HX when dissolved in 2.00 l of aqueous solution, is approximately 1.98 x 10^(-5).

1. Calculate the concentration of HX:
  - Divide the moles of HX by the volume of the solution.
   0.764 mol / 2.00 L = 0.382 M

2. Find the concentration of H+ ions from the pH value:
  - pH = -log[H+]
  - 2.56 = -log[H+]
  - H+ concentration = 10^(-2.56) ≈ 2.75 x 10^(-3) M

3. Use the definition of the weak acid dissociation constant (Ka):
  - Ka = [H+][A-] / [HX]
  - Since HX is a weak acid, we can assume that the concentrations of H+ and A- are approximately equal.
  - Ka = (2.75 x 10^(-3))^2 / (0.382 - 2.75 x 10^(-3))
  - Ka ≈ 1.98 x 10^(-5)

Learn more about Ka here:

https://brainly.com/question/30666585

#SPJ11

I has more electrons than I, although having the same number of protons, when comparing their sizes. Because of this, l has a smaller Zeff than l, which results in ions.

An isoelectronic comparison refers to the measurements of atoms or ions with the same number of electrons but differing nuclear charges. When ion channels in the membrane open or close, it causes depolarization and hyperpolarization by changing which kinds of ions can enter or exit the membrane. However, it was recognised that atoms carry equal amounts of positive and negative charge, meaning that their net charge is zero. This property is known as electrical neutrality.

To know more about electrons, click here:

https://brainly.com/question/1255220

#SPJ4

The intermolecular forces between hydrogen peroxide and methanol are hydrogen bonding and dipole-dipole interactions.

The intermolecular forces that act between a hydrogen peroxide (H2O2) molecule and a methanol (CH3OH) molecule are hydrogen bonding and dipole-dipole interactions. The oxygen atoms in H2O2 and CH3OH are highly electronegative, creating a dipole moment. This allows the oxygen atoms to interact with each other through dipole-dipole interactions. Additionally, the hydrogen atoms in both molecules are bonded to highly electronegative atoms, making them capable of participating in hydrogen bonding interactions.

Know more about intermolecular forces here:

https://brainly.com/question/12243368

#SPJ11

An alpha helix that is 24 å long contains approximately 16 amino acids. An alpha helix is a common secondary structure in proteins, where the polypeptide chain is coiled like a spring.

The length of an alpha helix is typically measured in angstroms (å). It is known that one complete turn of the helix covers a distance of 5.4 å, and there are approximately 3.6 amino acids per turn.

Using these measurements, we can calculate the number of amino acids in an alpha helix that is 24 å long. First, we divide 24 å by 5.4 å per turn, which gives us 4.44 turns. Then, we multiply 4.44 turns by 3.6 amino acids per turn, which gives us 16 amino acids.

It is important to note that the actual number of amino acids in an alpha helix may vary slightly, as the exact length of the helix can be influenced by factors such as the specific amino acids involved and the presence of other protein structures.

Nonetheless, the above calculation provides a good estimate of the number of amino acids in a typical alpha helix.

To know more about polypeptide chain refer here:

https://brainly.com/question/6426934#

#SPJ11

The coupling of the diazonium salt with phenol or an aromatic amine occurs at the para position due to the activating nature of the substituents on the aromatic ring. It allows for the full delocalization of the positive charge generated by the diazonium salt.

The para position is in the same plane as the nitro group, which stabilizes the positive charge by resonance. This results in a more stable product, as the positive charge is delocalized over the full conjugated system of the aromatic ring. Additionally, the para position allows for optimal steric interactions between the reactants, which further promotes the formation of the desired product.  Both phenols and aromatic amines have electron-donating groups (-OH in phenols and -NH2 in aromatic amines) that can stabilize the positive charge generated during the electrophilic aromatic substitution reaction.

The electron-donating groups activate the aromatic ring and direct the electrophilic substitution to the ortho and para positions. However, the ortho position is often sterically hindered due to the proximity of the electron-donating group, making the para position the preferred site for the coupling reaction with diazonium salts.

To know more about Para Position visit:
https://brainly.com/question/31051319

#SPJ11

No, the molecule [tex]NH_{3}[/tex]  does not have a central atom with the same hybridization as oxygen in the water.

In water ( [tex]H_{2}O[/tex] ), the oxygen atom forms two sigma bonds with two hydrogen atoms and also has two lone pairs of electrons, resulting in a tetrahedral molecular geometry. Oxygen in water has [tex]sp^{3}[/tex] hybridization, which means it has four electron domains around the central atom.

The molecular geometry of ammonia is trigonal pyramidal, with the nitrogen atom at the center and the three hydrogen atoms and one lone pair of electrons surrounding it.  [tex]NH_{3}[/tex] , on the other hand, has [tex]sp^{3}[/tex]  hybridization as well but only has three electron domains around the central atom. Therefore, the hybridization of the central atoms in [tex]NH_{3}[/tex] and water is not the same.

Therefore, while both water and ammonia have tetrahedral molecular geometries, the hybridization of the central atoms is different. The oxygen atom in water is [tex]sp^{3}[/tex] hybridized, while the nitrogen atom in ammonia is also [tex]sp^{3}[/tex]  hybridized.

To know more about Molecular Geometry:

https://brainly.com/question/29591951

#SPJ11

The pH of the solution prepared by adding 2.0 mL of 0.020 M NaOH to 10.0 mL of water is approximately 11.52.

The pH of the solution can be calculated using the following steps:

1: Calculate the moles of NaOH added.

Moles of NaOH = concentration of NaOH × volume of NaOH added

Moles of NaOH = 0.020 M × 0.0020 L = 4.0 x 10⁻⁵ moles

2: Calculate the total volume of the solution.

Total volume of solution = volume of water + volume of NaOH added

Total volume of solution = 0.010 L + 0.0020 L = 0.012 L

3: Calculate the concentration of hydroxide ions (OH-) in the solution.

Concentration of OH- = moles of NaOH / total volume of solution

Concentration of OH- = 4.0 x 10⁻⁵ moles / 0.012 L = 3.33 x 10⁻³ M

4: Calculate the pOH of the solution.

pOH = -log[OH-]

pOH = -log(3.33 x 10⁻³) ≈ 2.48

Step 5: Calculate the pH of the solution.

pH = 14 - pOH

pH = 14 - 2.48 ≈ 11.52

You can learn more about pH at: brainly.com/question/15289714

#SPJ11

Coal powered stations and  factories are direct and indirect sources of particulate matter.

One of the worst types of pollution in the air in India and around the world is particle pollution, also known as particulate matter pollution. Human activities are the main source of the increase in particle pollution, a type of air pollution.

Factories, power plants, incinerators, industries, autos, and diesel generators are major contributors of particulate matter emissions. All of this has human origins or is the result of human activity. Coal powered stations and  factories are direct and indirect sources of particulate matter.

To know more about particulate matter, here:

https://brainly.com/question/15230454

#SPJ1

The molar heat capacity of iron when temperature of 150 g of iron increased from 27.1 °C to 33.1 °C after absorbing 406 J of heat is 25.2 J/mol °C. The correct option is c.

To determine the molar heat capacity of iron, we can use the formula: q = n * C * ΔT, where q is the heat absorbed, n is the number of moles of iron, C is the molar heat capacity, and ΔT is the change in temperature.

First, we need to find the number of moles of iron (n). The molar mass of iron (Fe) is 55.85 g/mol. With 150 g of iron, we can calculate the number of moles as:

n = mass / molar mass = 150 g / 55.85 g/mol ≈ 2.69 mol

Next, we need to find the change in temperature (ΔT). The initial temperature is 27.1 °C and the final temperature is 33.1 °C, so the change is:

ΔT = 33.1 °C - 27.1 °C = 6.0 °C

The heat absorbed (q) is given as 406 J. Now we can solve for the molar heat capacity (C) using the formula:

406 J = 2.69 mol * C * 6.0 °C

To find C, we can rearrange the formula and divide both sides by (2.69 mol * 6.0 °C):

C = 406 J / (2.69 mol * 6.0 °C) ≈ 25.1 J/mol °C

The closest answer choice is 25.2 J/mol °C, so the correct answer is (c) 25.2 J/mol °C.

For more such questions on Molar heat capacity.

https://brainly.com/question/28302909#

#SPJ11

The root mean square (rms) average speed of the atoms in a sample of krypton gas at 0.14 atm and -16 degree C is approximately 357 m/s.

To calculate the root mean square (rms) average speed of krypton gas, we can use the formula:
rms speed = √(3kT/m)
where k is the Boltzmann constant (1.38 x 10^-23 J/K), T is the temperature in Kelvin, and m is the molar mass of the gas.
First, let's convert the given temperature of -16 degree C to Kelvin:
-16 degree C + 273= 257K
Next, we need to find the molar mass of krypton, which is 83.798 g/mol.
Now we can plug in the values:
rms speed = √(3(1.38 x 10^-23 J/K)(257 K)/(0.08380 kg/mol)) = 357 m/s.
rms speed = 357 m/s

Therefore, the root mean square (rms) average speed of the atoms in a sample of krypton gas at 0.14 atm and -16 degree C is approximately 357 m/s.

Learn more about root mean square average speed : https://brainly.com/question/14298888

#SPJ11

solvents is aprotic or protic:

Part A isopropanol - protic
Part B ethanol - protic

Part C toluene - aprotic
Part D propanoic acid - protic
classify these solvents as aprotic or protic:
Part A: Isopropanol is a protic solvent.
Part B: Ethanol is a protic solvent.
Part C: Toluene is an aprotic solvent.
Part D: Propanoic acid is a protic solvent.

Learn more about isopropanol t here:

https://brainly.com/question/22284953

#SPJ11

solvents is aprotic or protic:

Part A isopropanol - protic
Part B ethanol - protic

Part C toluene - aprotic
Part D propanoic acid - protic
classify these solvents as aprotic or protic:
Part A: Isopropanol is a protic solvent.
Part B: Ethanol is a protic solvent.
Part C: Toluene is an aprotic solvent.
Part D: Propanoic acid is a protic solvent.

Learn more about isopropanol t here:

https://brainly.com/question/22284953

#SPJ11

In the crystal, ion, or molecular structure, the bond "holds together" the atoms.

Thus, The attraction between two or more atoms that enables them to combine to produce a stable chemical compound is known as chemical bonding.

Chemical bonds can have many different types, but covalent and ionic bonds are the most well-known. When one atom has less energy, the other has enough thanks to these bonds.

Atoms are held together by the force of attraction, which enables the electrons to unite in a bond.

Thus, In the crystal, ion, or molecular structure, the bond "holds together" the atoms.

Learn more about Bonds, refer to the link:

https://brainly.com/question/17405470

#SPJ1

The noble gas that takes almost half as long as Neon to effuse through a pinhole under the exact same conditions is Helium.

Effusion is the process by which gas particles flow through a small opening. According to Graham's Law of Effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. In other words, lighter gases effuse faster than heavier gases under the same conditions.

The molar mass of Helium is approximately 4 g/mol, while the molar mass of Neon is approximately 20 g/mol. Since Neon has a larger molar mass than Helium, we would expect Helium to effuse faster than Neon.

Therefore the answer is "the noble gas that takes almost half as long as Neon to effuse through a pinhole under the exact same conditions is Helium."

Learn more about effusion here: https://brainly.com/question/28320456

#SPJ11

To calculate the standard enthalpy change, δ∘, for the reaction A + B ⟶ 2C, we can use Hess's Law and the given information about the enthalpies of formation and standard enthalpy change for the reaction A + B ⟶ 2C at 298 K is +662.4 kJ/mol.

First, we can write the two reactions and their enthalpy changes as follows: A + B ⟶ 2D δ∘ = +661.8 kJ/mol 2D ⟶ D + C δ∘ = -308.0 J/K/mol = -0.308 kJ/mol/K (note that this is given in J/K/mol, so we need to convert it to kJ/mol)

Next, we can use the fact that the enthalpy change is a state function, meaning that it only depends on the initial and final states of the system and not on the path taken between them.

Therefore, we can add the two reactions together to obtain the overall reaction of interest: A + B ⟶ 2C δ∘ = ? To do this, we need to cancel out the intermediate species, D, on both sides of the equation.

We can do this by multiplying the second reaction by 2 and reversing it: 2D ⟶ 2C δ∘ = -2(-0.308 kJ/mol/K) = +0.616 kJ/mol/K A + B ⟶ 2D δ∘ = +661.8 kJ/mol A + B ⟶ 2C δ∘ = +662.4 kJ/mol. Therefore, the standard enthalpy change for the reaction A + B ⟶ 2C at 298 K is +662.4 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

According to the rule of conservation of mass, mass does not change during a chemical reaction. answer is False.

A chemical reaction cannot create or remove mass (matter), according to the Law of Conservation of Mass.

Therefore, the combined mass of all the components in a chemical reaction should be the same as the combined mass of all the elements in the reactants.

In other words, the ratio of atoms of each element present in the reactants to those present in the products must be the same.

An object's mass is an intrinsic property, which means it is a component of the thing's structure and cannot be altered without altering the object itself. The measure of an item's resistance to a change in motion or direction, mass can also be thought of as the amount of inertia a thing has.

To  learn more about Mass, visit:

brainly.com/question/24191825

#SPJ1

The complete question is,

Write true or false. Correct the false statement.

The law of conservation of mass states that mass is created during a chemical reaction.

The balanced chemical equation for the reaction between formic acid (HCOOH) and sodium hydroxide (NaOH) is: The Correct option is B the pH after 5.00 mL of NaOH has been added is 4.26.

[tex]HCOOH + NaOH → NaCOOH + H_{2} O[/tex]

This indicates that 1 mole of HCOOH reacts with 1 mole of NaOH.

First, let's calculate the number of moles of HCOOH present in the initial 30.00 ml solution:

moles of HCOOH = (0.125 mol/L) × (0.03000 L) = 0.00375 mol

Since the stoichiometry of the reaction is 1:1, 5.00 ml of 0.175 M NaOH corresponds to:

moles of NaOH = (0.175 mol/L) × (0.00500 L) = 0.000875 mol

To calculate the moles of HCOOH remaining after the addition of NaOH:

moles of HCOOH = initial moles - moles of NaOH added

= 0.00375 mol - 0.000875 mol

= 0.002875 mol

Now we can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of formic acid, [A-] is the concentration of the formate ion (HCOO-), and [HA] is the concentration of the undissociated formic acid (HCOOH).

The pKa of formic acid is 3.75, and the concentrations of HCOO- and HCOOH can be calculated using the moles and volumes:

[A-] = moles of NaCOOH / total volume

= 0.000875 mol / 0.03500 L

= 0.025 mol/L

[HA] = moles of HCOOH / total volume

= 0.002875 mol / 0.03500 L

= 0.082 mol/L

Substituting into the Henderson-Hasselbalch equation:

pH = 3.75 + log(0.025/0.082)

= 4.26

Therefore, the pH after 5.00 mL of NaOH has been added is 4.26.

Learn more about  chemical equation

https://brainly.com/question/19626681

#SPJ4

the volume of carbon monoxide gas produced when one mole of carbon reacts with one mole of oxygen is 22.4 liters at STP.

To determine the volume of carbon monoxide gas produced when carbon and oxygen react, we need to know the quantities of carbon and oxygen involved in the reaction. The balanced chemical equation for the reaction is:
C + O₂ -> CO
From this equation, we can see that one mole of carbon reacts with one mole of oxygen to produce one mole of carbon monoxide gas.
Assuming that we have one mole of carbon available, we need to determine the amount of oxygen required to react completely with it. The molar ratio of oxygen to carbon in the equation is 1:1, so we also need one mole of oxygen.
Now, we can use the ideal gas law to determine the volume of carbon monoxide gas produced. The ideal gas law states that:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas.
Assuming that the reaction takes place at standard temperature and pressure (STP), which is 0°C and 1 atm, we can use the following values:
- P = 1 atm
- T = 273 K
- R = 0.0821 L·atm/mol·K
The number of moles of carbon monoxide produced is also one, since one mole of carbon and one mole of oxygen react to form one mole of carbon monoxide.
Plugging these values into the ideal gas law, we get:
V = nRT/P
V = (1 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm)
V = 22.4 L
Therefore, the volume of carbon monoxide gas produced when one mole of carbon reacts with one mole of oxygen is 22.4 liters at STP.

To learn more about carbon monoxide gas https://brainly.com/question/21499818

#SPJ11

The temperature of the reaction is approximately 416 K.

The relationship between the equilibrium constant (K) and the standard free energy change (∆G°) is given by the equation:

∆G° = -RTlnK

Where R is the gas constant and T is the temperature in Kelvin. Rearranging this equation, we get:

lnK = -∆G° / RT

Substituting the given values, we get:

ln(1.20 x 10^-6) = -(18.50 x 10^3 J/mol) / (R * T)

Solving for T, we get T ≈ 416 K.

Therefore, the temperature of the reaction is approximately 416 K.

For more questions like Temperature click the link below:

https://brainly.com/question/11464844

#SPJ11

The temperature of the reaction is approximately 416 K.

The relationship between the equilibrium constant (K) and the standard free energy change (∆G°) is given by the equation:

∆G° = -RTlnK

Where R is the gas constant and T is the temperature in Kelvin. Rearranging this equation, we get:

lnK = -∆G° / RT

Substituting the given values, we get:

ln(1.20 x 10^-6) = -(18.50 x 10^3 J/mol) / (R * T)

Solving for T, we get T ≈ 416 K.

Therefore, the temperature of the reaction is approximately 416 K.

For more questions like Temperature click the link below:

https://brainly.com/question/11464844

#SPJ11

In solvolysis, the carbon-halogen (C-X) bond is broken in presence of water to form a carbon-oxygen (C-OH) bond.

From the given options, 3-iodo-3-methylpentane undergoes solvolysis in aqueous ethanol most rapidly because;

1. Iodine has a larger atomic radius compared to bromine and chlorine and this forms weaker carbon-halogen (C----I) bonds, which are easier to break during solvolysis.
2. 3-iodo-3-methylpentane has a tertiary carbon atom (R3-C---I) bonded to the iodine. Tertiary carbocations (R3-C+) are more stable due to hyperconjugation and inductive effects, which allows the reaction to proceed faster compared to primary and secondary carbocations.

Therefore, the weak C---I bond and the stability of the tertiary carbocation (R3-C+) formed, contribute to the rapid solvolysis of 3-iodo-3-methylpentane in aqueous ethanol.

https://brainly.com/question/31485910

#SPJ11

The order of solubility of Group II cations (from 1= most soluble to 4= least soluble) is as follows:

1. Magnesium (Mg)
2. Calcium (Ca)
3. Strontium (Sr)
4. Barium (Ba)

To determine the order of solubility of Group II cations (from 1= most soluble to 4= least soluble), we need to consider the following:

Group II cations typically include Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), and Barium (Ba). However, since you've asked for 4 cations, I'll consider the four most common ones: Mg, Ca, Sr, and Ba.

The order of solubility of Group II cations, from most soluble (1) to least soluble (4), can be determined based on the solubility of their sulfates, which generally decrease down the group. Here's the order:

1. Magnesium (Mg) - most soluble
2. Calcium (Ca)
3. Strontium (Sr)
4. Barium (Ba) - least soluble

Keep in mind that this order is based on the solubility of their sulfates, and the solubility may vary for other compounds formed by these cations.

Learn more about solubility at https://brainly.com/question/9098308

#SPJ11

The cations in order of increasing ionic radii are:

(a) Ga3+ < Ca2+ < K+
(b) Be2+ < Mg2+ < Ca2+ < Ba2+
(c) Al3+ < Sr2+ < K+ < Rb+
(d) Ca2+ < K+ < Rb+

It is because moving down the group in the periodic table, the ionic radii typically increase, and as the charge of a cation increases, the ionic radii typically decrease.

In the first series, the charge of a cation increases, and so the ionic radii decrease from potassium to calcium to gallium.

In the second series, the ionic radii typically increase moving down the group from Beryllium to Magnesium to Calcium and then Barium.

In the third and final series also the ionic radii increase as the charge of a cation increases or one moves down the group from potassium to rubidium.

To know more about periodicity, click below:

https://brainly.com/question/11744995

#SPJ11

Hto determine if benzophenone or diphenylmethanol is more polar, we need to compare their molecular structures and the presence of polar functional groups.

Benzophenone has a central carbonyl group (C=O) connecting two phenyl rings. The carbonyl group is polar due to the electronegativity difference between carbon and oxygen atoms.
Diphenylmethanol has a hydroxyl group (OH) connected to a carbon atom, which is in turn connected to two phenyl rings. The hydroxyl group is polar due to the electronegativity difference between oxygen and hydrogen atoms.
Between the two compounds, diphenylmethanol is more polar because the hydroxyl group (OH) is more polar than the carbonyl group (C=O) in benzophenone. The polarity of the hydroxyl group in diphenylmethanol contributes a stronger dipole moment, making it more polar overall.

Learn more about benzophenone here:

https://brainly.com/question/31408222

#SPJ11

Hto determine if benzophenone or diphenylmethanol is more polar, we need to compare their molecular structures and the presence of polar functional groups.

Benzophenone has a central carbonyl group (C=O) connecting two phenyl rings. The carbonyl group is polar due to the electronegativity difference between carbon and oxygen atoms.
Diphenylmethanol has a hydroxyl group (OH) connected to a carbon atom, which is in turn connected to two phenyl rings. The hydroxyl group is polar due to the electronegativity difference between oxygen and hydrogen atoms.
Between the two compounds, diphenylmethanol is more polar because the hydroxyl group (OH) is more polar than the carbonyl group (C=O) in benzophenone. The polarity of the hydroxyl group in diphenylmethanol contributes a stronger dipole moment, making it more polar overall.

Learn more about benzophenone here:

https://brainly.com/question/31408222

#SPJ11

The molecular formula of a compound with the molar mass of 104 g/mol and an empirical formula of CH is C₈H₈.

To calculate the molecular formula of a chemical with a molar mass of 104 g/mol and an empirical formula of CH, discover the ratio of the empirical formula mass to the molar mass and multiply the empirical formula by this ratio. CH has an empirical formula mass of 13 g/mol (1 carbon atom weighing 12 g/mol + 1 hydrogen atom weighing 1 g/mol).

The ratio of the molar mass to the empirical formula mass is 104 g/mol ÷ 13 g/mol = 8. Therefore, we can multiply the empirical formula by 8 to get the molecular formula, C₈H₈. Thus, the molecular formula of the compound is C₈H₈.

To know more about empirical formula, visit.

https://brainly.com/question/1603500

#SPJ4

The relative mass of a proton is 1, the relative mass of a neutron is 1, and the relative mass of an electron is approximately 1/1836 or 0.00055 (i.e., electrons are much lighter than protons and neutrons).

What is relative mass ?

Relative mass is the mass of an object or particle compared to the mass of another object or particle, usually a standard reference object or particle. Relative mass is often expressed in terms of a dimensionless quantity known as the mass ratio, which is the ratio of the mass of the object or particle in question to the mass of the reference object or particle. The reference object or particle is usually defined as having a mass of 1, so the mass ratio for any other object or particle is simply equal to its mass divided by the mass of the reference object or particle. Relative mass is commonly used in physics and chemistry to describe the mass of subatomic particles, such as electrons, protons, and neutrons, and to compare the masses of different molecules, compounds, or elements.

To know more about relative mass, visit:

https://brainly.com/question/19335581

#SPJ9

Complete question is: The relative mass of a proton is 1, the relative mass of a neutron is 1, and the relative mass of an electron is approximately 1/1836 or 0.00055.

The equilibrium composition of the mixture is CO2: 9.66 atm, CO: 0 atm, H2O: 0.17 atm, and H2: 0 atm and  the calculated value of heat transfer is:
q =  -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K)).

An equimolar mixture of CO and H2O enters a reactor operating at steady state. The equilibrium mixture composed of CO2, CO, H2O(g), and H2 leaves at 2000 K and 1 atm.

Using the Gibbs free energy equation, we can calculate the equilibrium composition of the mixture at 2000 K. Thus, the equilibrium composition of the mixture at 2000 K is:

CO2: 9.66 atm

CO: 0 atm

H2O: 0.17 atm

H2: 0 atm

To calculate the heat transfer (q) between the reactor and surroundings per kmol of CO entering the reactor, we can use the equation q = ΔH - TΔS, where ΔH and ΔS are the enthalpy and entropy changes for the reaction per kmol of CO.

Using tabulated values, we find that ΔH for the reaction is -41.2 kJ/mol and ΔS is -90.2 J/(mol*K).

Substituting these values into the equation, we find:

q = -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K))

Therefore, the calculated value of q is -41.2 kJ/mol - (2000 K - 298 K)(-90.2 J/(mol*K)).

for more such question on heat transfer

https://brainly.com/question/16055406

#SPJ11

The equilibrium constant (Kb) for the reaction HA(aq) + OH⁻(aq) ⇆ A⁻(aq) + H₂O(ℓ) is 3.80×10⁻⁶.

To find the equilibrium constant for this reaction, we'll use the ionization constant of HA (Ka = 2.62×10⁻⁹) and the ion product of water (Kw = 1.0×10⁻¹⁴). The relationship between Ka, Kb, and Kw is given by:

Kw = Ka × Kb

Rearrange the equation to solve for Kb:

Kb = Kw / Ka

Plug in the values:

Kb = (1.0×10⁻¹⁴) / (2.62×10⁻⁹)

Kb = 3.80×10⁻⁶

Therefore, the equilibrium constant (Kb) for the given reaction is 3.80×10⁻⁶.

To know more about equilibrium constant click on below link:

https://brainly.com/question/31321186#

#SPJ11

Physicians use tables that list the liters of oxygen consumed per gram of foodstuff to measure the metabolic rate of conversion of foodstuffs in the body.

The metabolic rate of conversion of foodstuffs in the body can be measured by determining the amount of oxygen consumed per gram of foodstuff. Physicians use tables that list the liters of oxygen consumed per gram of foodstuff to make these measurements.

For example, when glucose reacts in the body, it reacts with oxygen to produce water and carbon dioxide. The balanced chemical equation for this reaction is C6H12O6 (glucose) + 6O2(g) → 6H2O(l) + 6CO2(g).

By measuring the amount of oxygen consumed during this reaction and consulting a table of oxygen consumption rates for glucose, physicians can determine the metabolic rate of glucose conversion in the body.

This measurement is important because it provides information about how efficiently the body is processing foodstuffs and can help diagnose and monitor various metabolic disorders.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

The pH at the half-stoichiometric point for this titration is approximately 3.37.

The half-stoichiometric point is the point in the titration where exactly half of the acid has reacted with the base. In this case, the balanced chemical equation for the reaction is:

HNO2 + KOH → KNO2 + H2O

The stoichiometry of the reaction is 1:1, meaning that 1 mole of HNO2 reacts with 1 mole of KOH. Therefore, at the half-stoichiometric point, 0.11 moles of HNO2 have reacted with 0.11 moles of KOH.

To calculate the pH at this point, we need to first calculate the concentration of HNO2 remaining in solution. The initial concentration of HNO2 is 0.22 M, and at the half-stoichiometric point, half of it has reacted, leaving 0.11 M remaining.

To calculate the pH, we can use the acid dissociation constant (Ka) for HNO2:

Ka = [H+][NO2-]/[HNO2]

At the half-stoichiometric point, we can assume that all of the HNO2 has dissociated, so:

Ka = [H+][NO2-]/(0.11)

Solving for [H+], we get:

[H+] = sqrt(Ka*[HNO2]) = sqrt(4.3E-4 * 0.11) = 0.0125 M

Using the pH formula, pH = -log[H+], we can calculate the pH:

pH = -log(0.0125) = 1.90

Therefore, the pH at the half-stoichiometric point for the titration of 0.22 M HNO2 with 0.01 M KOH is 1.90.

Learn more about half-stoichiometric point here: brainly.com/question/9173781

#SPJ11

The pH at the half-stoichiometric point for this titration is approximately 3.37.

The half-stoichiometric point is the point in the titration where exactly half of the acid has reacted with the base. In this case, the balanced chemical equation for the reaction is:

HNO2 + KOH → KNO2 + H2O

The stoichiometry of the reaction is 1:1, meaning that 1 mole of HNO2 reacts with 1 mole of KOH. Therefore, at the half-stoichiometric point, 0.11 moles of HNO2 have reacted with 0.11 moles of KOH.

To calculate the pH at this point, we need to first calculate the concentration of HNO2 remaining in solution. The initial concentration of HNO2 is 0.22 M, and at the half-stoichiometric point, half of it has reacted, leaving 0.11 M remaining.

To calculate the pH, we can use the acid dissociation constant (Ka) for HNO2:

Ka = [H+][NO2-]/[HNO2]

At the half-stoichiometric point, we can assume that all of the HNO2 has dissociated, so:

Ka = [H+][NO2-]/(0.11)

Solving for [H+], we get:

[H+] = sqrt(Ka*[HNO2]) = sqrt(4.3E-4 * 0.11) = 0.0125 M

Using the pH formula, pH = -log[H+], we can calculate the pH:

pH = -log(0.0125) = 1.90

Therefore, the pH at the half-stoichiometric point for the titration of 0.22 M HNO2 with 0.01 M KOH is 1.90.

Learn more about half-stoichiometric point here: brainly.com/question/9173781

#SPJ11