Do help me become a detective, would it matter if I chose triple science or not?

Here is the Conclusion 240. Heat energy affects a substance’s intermolecular forces as the substance changes between states.

Heat energy increases during the following state changes

Solid - (melting)

Liquid -gas (evaporation)

Solid- gas (sublimation)

Heat energy decreases during the following state changes

Gas- liquid (condensation)

Liquid → solid (freezing)

Gas –solid (deposition)

An intermolecular force (IMF) (or secondary force) is the force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of nearby particles, such as atoms or ions.

To learn more about intermolecular to refer:

https://brainly.com/question/9328418

#SPJ1

The  heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C. 2016.6 J.

When the temperature rises, molecules and atoms move faster and collide, creating heat generated (also known as heat energy). Thermal energy is the heat that results from heated substance's temperatures.

The following phrase may be used to determine the change in heat energy in a process like melting.

S = H * m / T

where:

S = entropy [kJ]

H = fusion heat = 3.36*10¹ [J/kg]

m = mass = 0.02 [kg]

T = temperature in kelvin = 273 [K]

S = 0.02 * 5.00 * 10² / (273 + 0)

S = 2016.6 J

To know more about Heat energy visit:

https://brainly.com/question/25384702

#SPJ1

The complete question is -

Calculate the heat energy of 5.00 * 10² g of ice when it melts at 0.0°C. The heat of fusion of ice is 3.36 x 10'J/kg.

An atom that has 13 protons and 14 neutrons will have mass number 27.

Rutherford demonstrated that an atom's nucleus, which is made up of protons and neutrons, contains the vast bulk of the atom's mass. The total number of protons and neutrons in an atom is referred to as the mass number. The number of protons(atomic number) and neutrons and their sum can be used to compute it.

We know that,

Mass number = Number of protons + Number of neutrons

= 13 + 14 = 27.

The mass number  is 27.

Therefore  an atom that have 13 protons and 14 neutrons will have mass number 27.

Learn more about mass number at https://brainly.com/question/14089559

#SPJ4

The two portions on this module for which we can broaden unit elements to do dimensional analysis with chemical materials are volume and mass.

volume is a degree of the quantity of three-dimensional space occupied by using an object or substance. it's miles regularly measured in liters, cubic centimeters, or cubic meters. volume is used to measure the potential of a field, the dimensions of an object, or the quantity of liquid or gas in a given space. it's also used to determine the mass of an item, because the density (mass in line with unit quantity) is often acknowledged.

the 2 portions of volume and mass are critical for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in distinct gadgets. extent is vital for measuring the quantity of liquid materials, and mass is critical for measuring the quantity of strong substances. each of these portions are vital for accurate and specific measurements of chemical substances, making them crucial for dimensional analysis.

To know more about chemicals click here

https://brainly.com/question/26487468

#SPJ4

Considering the feedback loop that occurs when you quickly remove your hand away from something hot, this reflex helps to maintain homeostasis by ensuring that the body is free from danger and thus maintains the internal condition of the body.

The stable internal, external, and chemical conditions that are maintained by living systems are known as homeostasis. In order for the organism to function at its best, a number of factors, including body temperature and fluid balance, must be maintained within predetermined ranges.

The body's reflexes help to maintain homeostasis in the body such as heart rate, breathing rate, blood pressure, and digestion.

Some reflexes that maintain homeostasis in the body include:

Learn more about homeostasis and reflexes at: https://brainly.com/question/6636638

#SPJ1

Ferric oxide, is the product that is formed when iron undergoes oxidation

Upon reacting with oxygen, iron will be oxidized to either the +3 oxidation state in iron (III) oxide, or to a combination of the +2 and +3 oxidation states in iron (II, III) oxide.The balanced chemical equations for these reactions look like this

#4”Fe”_text((s]) + 3”O”_text(2(g]) -> 2”Fe”””_2”O”_text(3(s])#

And

#3”Fe”_text((s]) + 2”O”_text(2(g]) -> “Fe”””_3”O”_text(4(s])#

The first compound, iron (III) oxide, also called ferric oxide, is dark red/brown in color

While the second compound, iron (II, III) oxide, also called ferrous ferric oxide, is dark brown/black in color.The [Fe(H2O)6]3+ ion is colorless (or pale pink), but many solutions containing this ion are yellow or amber-colored because of hydrolysis.

To learn more about chemical equation to refer:

https://brainly.com/question/30087623

#SPJ1

The relation between CO₂ and O₂ for sea urchins is impacted by the rise in carbon dioxide and oxygen is absorbed from the water.

The exoskeleton of sea urchins, which are found in the ocean, is comprised of calcium carbonate. They create calcium carbonate by absorbing the carbon dioxide from the water. As waste, they discharge carbon dioxide out of the anus.

The sea urchin takes its oxygen from the water. In the canals, oxygen diffuses. Oxygen diffuses into the cells from canals. The ocean's pH may rise as a result of the increased carbon dioxide. A higher pH has a deleterious impact on the calcification process. Therefore, the increased carbon dioxide has an impact on how the larvae and adults of sea  urchins calcify.

To know more about exoskeleton here

https://brainly.com/question/1470572

#SPJ4

For the homogeneous solution consisting of KCl and H₂O,  the type of forces that are involved is the dipole-dipole forces, the ion-dipole forces dispersion forces, the hydrogen bonding.

In the homogeneous solution if the two compounds are KCl and H₂O, they both polar and the forces involved are dipole - dipole forces and the dispersion forces. the forces present in between the water molecules is the hydrogen bonding. the forces in between the K⁺ and the Cl⁻ present is the ion - dipole forces,

Thus the all the four forces present in the homogeneous solution of the KCl and H₂O that is the dipole-dipole forces, the ion-dipole forces, the dispersion forces, and the hydrogen bonding.

To learn more about forces here

https://brainly.com/question/7033619

#SPJ4

Answer:92.1g

Explanation:

This means that the reaction consumed4.004moles NaCl⋅2 moles Na2moles NaCl=4.004 moles NaConvert this to grams by using the element's molar mass4.004moles Na⋅22.99 g1mole Na=92.1 g

Be is the second element with two valence elements When a core electron is eliminated, the energy of ionization increases. From an element's electrical configuration, it is simple to see a significant change in ionization energy.

Electronically, beryllium is configured as 1s2 2s2. The outermost shell of beryllium has two valence electrons, hence the data on ionization energy will show a sharp rise or leap from the second to the third ionization energy due to the elimination of a core electron. Nitrogen has the following electrical configuration: 1s2 2s2 2p3. The outermost shell of nitrogen has five valence electrons, thus when one of them is removed, the ionization energy data for nitrogen will show a sharp rise or leap from the fifth to sixth ionization energy.

To learn more about ionization energy please click on below link

https://brainly.com/question/28385102

#SPJ4

Answer:

It's Simple earth just moves noob

The percent composition of cesium weighs 100 g in a sample with total mass of 400 g is 25 %.

The mass percent of an element in a compound is the contribution from the element to the total mass of the compound. It is the ratio of the mass fraction of the element to the total mass multiplied by 100.

Mass percent is a common term used to express the concentration of an ion or element in a mixture.

Given that total mass of the compound = 400 g

mass of cesium in the compound = 100 g.

Mass percent of cesium =  mass of Cs/total mass

  mass % = 100 /400 × 100 = 25%

Therefore, the mass % of Cs in the compound is 25%.

Find more on mass percent:

https://brainly.com/question/5394922

#SPJ1

Answer:

look for evidence that the molecules are chiral.

Explanation:

The instrument with which optically active compounds are studied is a polarimeter, shown in the figure below. Imagine a horizontal line that passes through the zero of a coordinate system.

i) No reactant will be left as all of them have been converted to product after completion of this reaction.

ii) Final percentage of each reactant remaining if each reaction went to completion is about 99.9%.

The difference between the moles (or molecules) of reactants consumed and the moles (or molecules) of products produced in a chemical reaction is known as the molar ratio.

i) Now given the molar ratio of CV : NaOH is 1:1 . That means Equal moles of CV and NaOH are present in the solution. That means all the CV and NaOH molecules will react to form equal number of products.

So in this case, no reactant will be left as all of them have been converted to product after completion of reaction.

ii) In this case, the given NaOH : CV = 1000 : 1. That means per 1000 moles of NaOH, we have only 1 mole of CV. Now since 1 mole of CV can react with only 1 mole of NaOH, then after the reaction of this 1 mole CV, there will be no CV left . And only 999 NaOH molecules will be left in the solution

So here % CV left = 0%

% of NaOH left = 999 / 1000 × 100

% of NaOH left = 99.9 %

To know more about molar ratio visit:

https://brainly.com/question/17920577

#SPJ4

Complete question is attached below

(a) It was necessary to clean the magnesium ribbon in order to remove any impurities or contaminants that might be present on the surface of the ribbon. These impurities could interfere with the burning process or alter the final products of the reaction.

(b) After burning, it is likely that an ash or residue was observed in the crucible.

(c) The increase in mass may be due to the production of new products during the burning process. These products may include magnesium oxide, which is a white solid, or other compounds formed through the reaction of magnesium with oxygen.

(d) The equation for the reaction that took place in the crucible is:

2Mg + O2 -> 2MgO

(e) When the product in the crucible is shaken with water, it is likely that any soluble products, such as magnesium hydroxide, will dissolve in the water. The remaining solid material can then be filtered out, leaving a solution containing the dissolved products.

The magnesium ribbon was cleaned to remove any impurities that could affect the reaction. After burning magnesium in oxygen, the resulting product is magnesium oxide, and the mass increases because the magnesium combines with the oxygen. The reaction equation is 2Mg + O2 -> 2MgO.

(a) It was necessary to clean the magnesium ribbon with steel wool to remove any surface oxidation or impurities that could affect the reaction.
(b) After burning, an observation that could be made in the crucible would be a white ash-like substance, which is magnesium oxide.
(c) There was an increase in mass because when magnesium reacts with oxygen, it gains mass as it combines with the oxygen to form magnesium oxide.
(d) The equation for the reaction is: 2Mg + O2 -> 2MgO
(e) When the product in the crucible was shaken with water and filtered, this procedure would typically be used to isolate the product from any remaining unreacted magnesium or other reaction by-products.

https://brainly.com/question/31503589

#SPJ2

The molecular formula for this compound is C4H8 that can be calculated from its empirical formula.

The empirical formula of a chemical compound is the simplest whole number ratio of atoms present in a compound. The compound is made up of only carbon and hydrogen atoms thus it is known as hydrocarbon. The percentage of carbon is 86%, therefore the percentage of hydrogen is 14%.

The molecular mass of the compound is given i.e., 56.104 grams.

Moles of C= 86 g * 1 mol/12 g =7 moles

Moles of H=14 g* 1 mol/1 g= 14 moles

Thus, the mole ratio of C:H can be given as:

Moles of C/ Moles of H= 7/14=1/2

Thus, the empirical formula is CH2 while its molecular formula is C4H8.

To learn more about molecular formula check the link below:

https://brainly.com/question/26388921

#SPJ4

Four water molecules are created for every ten oxygen atoms that are reacting.

A three carbon alkane, propane has the chemical formula C3H8. At room temperature and pressure, it is a gas, but it can be compressed into a liquid for transportation.

Its primary applications include home and water heating, food preparation and storage, clothing drying, and the powering of industrial and farm machinery. The production of plastics and other chemicals in the chemical sector also uses propane as a raw ingredient.

Cons of propane heating

To know more about alkane :

https://brainly.com/question/3648919

#SPJ1

Respiratory and fluid status are primary nursing interventions for patients with chemical burns.

When treating, make sure that the causative agent is completely removed. Remove contaminated clothing and jewelry and use the shower if necessary to wash off the chemicals for at least 20 minutes. Protect your eyes from chemical contamination. Cover the burn with a clean bandage.

During the first few days after a burn, check your peripheral pulse frequently for restricted blood flow. Carefully monitor hourly fluid intake and urine output, as well as blood pressure and heart rate. Any changes should be reported immediately to the burn surgeon.

Learn more about peripheral pulse visit:

brainly.com/question/8751059

#SPJ4

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number. All atoms with same atomic number are atoms of same element.

Here,

The orbital configuration of following elements is as follows: i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

Learn more about elements, here:

https://brainly.com/question/21882530

#SPJ4

The amount, in moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

The mole of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:

Mole = mass/molar mass

Molar mass of [tex]UO_2[/tex] = 238 + (16x2) = 270 g/mol

Thus, the number of moles in 28 grams of [tex]UO_2[/tex] would be:

Mole = 28/270 = 0.1037 mol

In other words, the number of moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

More on moles determination can be found here: https://brainly.com/question/14256491

#SPJ1

How many moles in 28 grams of UO2?

Answer:

Yellow

Explanation:

The color of the equilibrium mixture of Iodine Monochloride and Chlorine is yellow. When the mixture is heated, it becomes darker brown in color.

Answer:

it's option no A as described in the image

0Bh will be the hexadecimal value of AL (Aluminium)after these instructions execute

#D9DAD9 is the hex code for aluminum. (217, 218, 217) are the corresponding RGB values, indicating that it is made up of 33% red, 33% green, and 33% blue. Printers employ the CMYK color coding, which are C:1 M:0 Y:1 K:15. Aluminum has a brightness value of 85%, a saturation value of 0%, and a hue value of 120° on the HSV/HSB scale.Hexadecimal is the most practical number system to work with when dealing with long strings of numbers due to its compactness, aligned correspondence of 4 bits to 1 symbol, and freedom from the need to perform multiplication and addition when switching between bases (compare switching from binary to decimal and back).

complete question:What will be the hexadecimal value of AL after these instructions execute?

mov al, 0CFh

and al, 2Bh

learn more about Aluminium Refer:brainly.com/question/30228880

#SPJ4

The number of moles of the aluminum oxide that is produced is 4.5 moles.

We have to look at the stoichiometry of the reaction. In this case, we can see that there is a combination between the aluminum and the oxygen and then we have a product as have been shown in the equation that we have in the question.

From the equation, we know that;

4 moles of oxygen produces 2 moles of aluminum oxide

9 moles of oxygen produces x moles of aluminum oxide

x = 9 * 2/4

x = 4.5 moles

Learn more about stoichiometry:https://brainly.com/question/30218216

#SPJ1

Answer: its actually 4

Explanation:

There are 0.034 x 1019 = 10¹⁹ moles of molecules in 10 g of aspartame.

Avogadro's constant, 6.022 1023, and the molar mass of the material are used to calculate the number of molecules in a given mass of the substance. Aspartame's molecular formula is C14H18N2O5.

Aspartame has a molecular mass of 294 (12 * 14 + 1 * 18 + 14 * 2) + 16 * 5)

Let's convert the 10 mg mass supplied to aspartame moles as follows:

Amount of moles =

= 0.034 × 10 ⁻⁵ mole

We may convert this number to molecules using Avogadro's constant as follows:

= 0.034 × 10 ⁻⁵ (6.022 × 10²³)

= 0.034 × 10¹⁹

To learn more about molecules please click on below link

https://brainly.com/question/19922822

#SPJ4

The estimated time of death is approximately 10:30 pm the night before.

Estimating the time of death (TOD) can be a complex process, and the methods used will depend on the specific circumstances of the case. Some of the factors that may be taken into consideration include:

It is important to note that estimating the TOD is not an exact science and there are often significant margins of error. A professional forensic examination is typically needed to determine the TOD.

Learn more about TOD here:

https://brainly.com/question/29329824

#SPJ4

In quartz, silicon has a mass percent of 46.7% while oxygen has a mass percent of 53.3%.

Given the total mass of a sample of quartz (SiO2) (m1) = 5.05g

Mass of silicon (m2) = 2.36g

The percent composition of an element in a chemical compound is referred to as mass percent. Mass percent may be expressed as follows:

mass percent  = mass of element/mass of sample x 100

The percent mass of silicon (p1)  =  2.36/5.05 x100 = 46.7%

The substance was made of silicon and oxygen.

Thus, 100% Quartz =%Silicon +%Oxygen can be used to express the mass percentage of quartz.

100% Quartz = 46.7% + % Oxygen

% Oxygen = 53.3%

Hence the percentages of silicon and oxygen in quartz are 46.7% and 53.3%.

To learn more about silicon click here https://brainly.com/question/28213172

#SPJ4

You may determine the number of moles of solution you need by multiplying the volume in liters (4.00L) by the solution's molar concentration (0.250M), and then by the mass of sodium hydroxide (39.99 g/mol) in molar form. 1L = 39.99g × 4.00L x 0.250 M x 39.99g

The number sodium hydroxide of moles of solute dissolved in one liter of a solution is known as its molarity.

where,

250 mM Molarity =

moles of solute = n

= liquid volume in milliliters = 4L = 4000 ml

Now, using the molarity formula to combine all the values provided, we obtain

To learn more about sodium hydroxide please click on below link

https://brainly.com/question/29327783

#SPJ4

The title "e-cigarettes," sometimes known as "electronic nicotine delivery systems" (ENDS) and infrequently "electronic non-nicotine delivery systems," refers to a wide range of distinct products (ENNDS).

By heating the liquid, these systems can produce aerosols that the user inhales. These so-called e-liquids typically contain additives, flavours, and chemicals that can be harmful to people's health, alongside nicotine (but no tobacco), which could or may not been present.

The deadly mixture of 7,000 hazardous substances in cigarette smoke is generally lower prevalent in e-cigarette aerosol than it is. 3 Aerosol produced e-cigarettes is not risk-free, though.

It may include toxic or carcinogenic drugs include tobacco, contaminants like lead, volatile compounds, and melanoma agents.

To know more about E-cigarettes click here

brainly.com/question/11475841

#SPJ4

Considering the Charles' law and STP conditions, the volume at 100°C is 30.60 L.

Charles' law establishes the relationship between the volume and the temperature of a sample of gas at constant pressure and establishes that when the temperature is increased the volume of the gas also increases and that when cooling the volume decreases.

Mathematically, Charles's law is expressed as:

V÷T=k

where:

V is the volume.

T is the temperature.

k is a constant.

Analyzing an initial state 1 and a final state 2, it is fulfilled:

V₁÷T₁= V₂÷T₂

The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

In this case, you know:

Replacing in Charles' law:

22.4 L÷ 273 K= V₂÷ 373 K

Solving:

(22.4 L÷ 273 K)× 373 K= V₂

30.60 L= V₂

Finally, the final volume is 30.60 L.

Learn more about Charles' law and STP:

https://brainly.com/question/4147359

https://brainly.com/question/29396023

#SPJ1

67.0L of H₂O can be formed if 1. 25 liters of ethylene at 1. 00 atm and 298K are consumed in this reaction.

A mole is know to be the unit used in chemistry to measure the amount of a substance. It is defined as the amount of matter that contains as many atoms, molecules, or other particles as there are in 12 grams of carbon-12. Moles are a convenient way to measure large numbers of very small particles such as atoms, molecules, ions and electrons.

The molar volume of gas at 1.00 atm and 298 K is 22.41 L/mol.

Given that

2 moles of water are produced from 1 mole of ethylene,

The number of liters of water produced can be calculated with the following formula:

1.25 L C₂H₄ x (2 mol H₂O / 1 mol C₂H₄) x (22.41 L H₂O / 1 mol H₂O)

= 67.0 l H₂O

To learn more about mole

https://brainly.com/question/28003480

#SPJ4