Determine which set of side measurements could be used to form a right triangle.
12, 16, 20
6, 14, 19
6, 8, 15
4, 5, 6

Answers

Answer 1

Only the side lengths 12, 16, and 20 can be used to create a right triangle.(Option-A)

The Pythagorean theorem, which states that the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides, must be satisfied for a set of side measurements to create a right triangle.

This theorem allows us to determine which sets of side measurements can create a right triangle. 202 = 400 for the set of measures 12, 16, and 20.

[tex]12^2 + 16^2[/tex] = 144 + 256 = 400

The measurements could result in a right triangle because they meet the Pythagorean theorem.

Measurements 6, 14, and 19 are as follows: 192 = 361 62 + 142 = 36 + 196 = 232 . (Option-A)

For such more questions on right triangle

https://brainly.com/question/29869536

#SPJ8

Answer 2

Answer:

12, 16, 20

Step-by-step explanation:

A right triangle is a triangle that has one right angle, which is an angle that measures 90 degrees. The side opposite the right angle is called the hypotenuse. The other two sides are called the legs.

We can use the Pythagorean theorem to determine which set of side measurements. The Pythagorean theorem states that in a right triangle, the square of the hypotenuse is equal to the sum of the squares of the legs.

So, for each set of side measurements, we can calculate the square of each side and add them together. If the sum is equal to the square of the hypotenuse, then the set of side measurements could be used to form a right triangle.

Set 1: 12, 16, 20

Square of 12: 144Square of 16: 256Square of 20: 400

The sum of the squares of the legs is 144 + 256 = 400.

The square of the hypotenuse is also 400.

Therefore, set 1 could be used to form a right triangle.

Set 2: 6, 14, 19

Square of 6: 36Square of 14: 196Square of 19: 361

The sum of the squares of the legs is 36 + 196 = 232.

The square of the hypotenuse is 361.

Since the sum of the squares of the legs is not equal to the square of the hypotenuse, set 2 could not be used to form a right triangle.

Set 3: 6, 8, 15

Square of 6: 36Square of 8: 64Square of 15: 225

The sum of the squares of the legs is 36 + 64 = 100.

The square of the hypotenuse is 225.

Since the sum of the squares of the legs is not equal to the square of the hypotenuse, set 3 could not be used to form a right triangle.

Set 4: 4, 5, 6

Square of 4: 16 Square of 5: 25 Square of 6: 36

The sum of the squares of the legs is 16 + 25 = 41.

The square of the hypotenuse is 36.

Since the sum of the squares of the legs is not equal to the square of the hypotenuse, set 4 could not be used to form a right triangle.

Therefore, the only set of side measurements that could be used to form a right triangle is set 1.


Related Questions

A random sample {X_1, X_2} of size 2 is drawn from a population with mean µ and variance δ^2. (So X_1 & X_2 are i.i.d.) Let we have two unbiased estimator of the population mean µ

V_1 =1/2(X_1+X_2) and V2 =1/2(X_1+2X_2)

Which estimator would you use?

Answers

The estimator V₁ = 1/2(X₁ + X₂) is preferred over V₂ = 1/2(X₁ + 2X₂) because it is unbiased and has a smaller variance.

What is the correct estimator to use?

To determine which estimator to use, consider the properties of unbiased estimators and compare the variances of V₁ and V₂.

Unbiasedness:

For V₁:

E(V₁) = E(1/2(X₁ + X₂)) = 1/2(E(X₁) + E(X₂)) = 1/2(µ + µ) = µ

For V₂:

E(V₂) = E(1/2(X₁ + 2X₂)) = 1/2(E(X₁) + 2E(X₂)) = 1/2(µ + 2µ) = 3/2µ

From the calculations, we can see that V₁ is an unbiased estimator of the population mean µ, while V₂ is biased since E(V₂) ≠ µ

Therefore, V₁ is preferred in terms of unbiasedness.

Variance:

Var(V₁) = Var(1/2(X₁ + X₂)) = 1/4(Var(X₁) + Var(X₂) + 2Cov(X₁, X₂))

Var(V₁) = 1/4(δ² + δ² + 2*0) = 1/2δ²

Var(V₂) = Var(1/2(X₁ + 2X₂)) = 1/4(Var(X₁) + 4Var(X₂) + 2Cov(X₁, 2X₂))

Var(V₂) = 1/4(δ² + 4δ² + 2*0) = 5/4δ²

Comparing the variances, we can see that Var(V₁) = 1/2δ², while Var(V₂) = 5/4δ².

Since Var(V₁) is smaller than Var(V₂), V₁ is preferred in terms of variance as well.

Learn more about estimators at: https://brainly.com/question/27993465

#SPJ4

what's the distance between theses two. (-5, 1) (2, 4)

Answers

Answer: squareroot of 58

You can solve this problem simply by using the distance formula . Using the distance formula we can solve this problem by just placing the numbers and then solving the equation.

Helppp I really need this question answered

Answers

Answer:

32.5 units²

Step-by-step explanation:

We can find the area by dividing the figure into two shapes. If we solve for the area of a square and a triangle, we can add them together.

First, we can solve for the area of the 5x5 square. To find the area, we can multiply the two dimensions.

5 · 5 = 25 units²

Next, we can find the area of the triangle. It has an equal height to the square, so the height of the triangle is 5 units. The width isn't specified. Instead, we are shown that the width of both the square and the triangle equals 8 units. If we subtract the width of the square from the total, we can find the width of the triangle, too.

8 - 5 = 3

So, the height and the width of the triangle are 5x3. To find the area we can multiply these together, and then divide the product by two.

5 · 3 = 15

[tex]\frac{15}{2}[/tex] = 7.5

The area of the triangle is 7.5 units².

Finally, we can add the area of the triangle and the square together.

25 + 7.5 = 32.5

The area of the figure, then, is 32.5 units².

The answer is the last option.

I hope this helps ^^

Use strong induction to show that the square root of 18 is irrational. You must use strong induction to receive credit on this problem. Use strong induction to show that every integer amount of postage 30 cents or more can be formed using just 6-cent and 7-cent stamps.

Answers

[tex]\(\sqrt{k+1}\)[/tex] is irrational.

By the principle of strong induction, we can conclude that the square root of 18 is irrational.

What is irrationality?

In mathematics, irrationality refers to a property of certain numbers that cannot be expressed as a fraction of two integers or as a terminating or repeating decimal.

To prove that the square root of 18 is irrational using strong induction, we need to show that for every positive integer [tex]\(n\), if \(n > 1\) and \(\sqrt{n}\) is irrational, then \(\sqrt{n+1}\)[/tex] is also irrational.

[tex]\textbf{Base Case:}[/tex]

For [tex]\(n = 2\)[/tex], we have [tex]\(\sqrt{2}\).[/tex] It is a known fact that [tex]\(\sqrt{2}\)[/tex] is irrational. Thus, the base case holds true.

[tex]\textbf{Inductive Step:}[/tex]

Assume that for some positive integer k, if[tex]\(2 \leq k\) and \(\sqrt{k}\)[/tex] is irrational, then [tex]\(\sqrt{k+1}\)[/tex] is also irrational.

Now, consider the case for [tex]\(n = k+1\)[/tex]). We want to prove that [tex]\(\sqrt{k+1}\)[/tex] is irrational.

Since [tex]\(k \geq 2\)[/tex], we have [tex]\(k+1 > 2\)[/tex]. Therefore,[tex]\(\sqrt{k+1}\) is greater than \(\sqrt{2}\).[/tex]

Assume, for contradiction, that [tex]\(\sqrt{k+1}\)[/tex] is rational. Then, we can write \[tex](\sqrt{k+1}\)[/tex] as a fraction [tex]\(\frac{p}{q}\),[/tex] where p and q are positive integers with no common factors other than 1.

By squaring both sides, we get [tex]\(k+1 = \left(\frac{p}{q}\right)^2 = \frac{p^2}{q^2}\).[/tex]

Rearranging the equation, we have[tex]\(p^2 = (k+1)q^2\).[/tex]

Since [tex]\(k+1\)[/tex] is a positive integer and [tex]\(q^2\)[/tex] is also a positive integer, [tex]\(p^2\)[/tex]must be a multiple of [tex]\(k+1\)[/tex].

This implies that p must also be a multiple of [tex]\(k+1\).[/tex] Let \(p = m(k+1)\), where m is a positive integer.

Substituting this into the equation, we have [tex]\((m(k+1))^2 = (k+1)q^2\)[/tex].

Simplifying, we get [tex]\(m^2(k+1) = q^2\).[/tex]

This implies that [tex]\(q^2\)[/tex] is a multiple of [tex]\(k+1\)[/tex], which means [tex]\(q\)[/tex] is also a multiple of [tex]\(k+1\).[/tex]

However, this contradicts our assumption that p and q have no common factors other than 1.

Hence, our assumption that  [tex]\(\sqrt{k+1}\)[/tex] is rational must be false.

Therefore, [tex]\(\sqrt{k+1}\)[/tex] is irrational.

By the principle of strong induction, we can conclude that the square root of 18 is irrational.

Learn more about irrationality:

https://brainly.com/question/29729698

#SPJ4

Please help :) thank you to whoever does help!?

Answers

Answer:[tex]\boxed{\boxed{\sf{a=5}}}[/tex]Solution Steps:

____________________________

1.) Fill in the formula: F = [tex]B^2-C^2=A^2[/tex]F = [tex]12^2-13^2=A^2[/tex]F = [tex]144-169=A^2[/tex]

2.) Subtract:[tex]169-144=25[/tex]

3.) Find the square root of 25:[tex]\sqrt{25} =5[/tex]

So your answer would be C, [tex]\bold{a=5}[/tex].

____________________________

the other one i need help with asap!!

Answers

Answer:

(3x-2)(2x-3)

Step-by-step explanation:

Good luck!

OMG PLS HELP WITH THIS IM PANICKING OMG I GOT A F IN MATH MY MOM JUST YELLED AT ME IM CRYING PLS HELP WITH THS-

Answers

Answer:

4. 50,000 square miles

5. The office would round to $800,000 instead of $700,000 because they would lose that needed $35,495. If they rounded down, their budget would be cut short, and they won’t have enough money for the office.

6. Five numbers that could also be the population: 577,777; 575,555; 578,999: 578,787; 581,545.

7. 600,000

8.584,000

9. 260,000

Step-by-step explanation:

4. In this question, we’re rounding the number, “54,555” go the nearest ten thousand. When rounding numbers you look at the number next to the digit your rounding. In this case, since the second number is not 5 or higher, we round it to 50,000 as that’s closer than 60,000.

5. Like I stated above: if they round to the lowest amount, they won’t have enough money to but what they need. Therefore, even if according to rounding it needs to be lower, it will not be beneficial to the company.

6. This are all possible numbers cause they can all by round to 580,000 AND 600,000

7. Since the number next to six is not five or higher, we round it to the closest number which is 600,000.

8. Since the number next to 3 is 5, we round it to the higher number. So it’s 584,000

9. Since the number next to the underlined nunber is 6, we round it to the closest number which is 260,000

If you have any more questions, you can ask me :)

Let k be a constant and consider the function f(x,y,z) = kx? - kry + y2 -2yz - 22. (Thus, for example, if k = 4, then f(xy.z) = 4x2 - 4xy + 2y2-2yz -22) For what values (if any) of the constant k does / have a (nondegenerate) local maximum at (0.0.0)? For what values of k does / have a (nondegenerate) local minimum at (0.0.0)? Be sure to explain your reasoning.

Answers

The values of k for which the function f(x, y, z) = kx² - kry + y² - 2yz - 22 has a nondegenerate local maximum at (0, 0, 0) are when k > 0.

To find the critical points of the function, we need to calculate the partial derivatives with respect to each variable:

∂f/∂x = 2kx ∂f/∂y = -kr + 2y - 2z ∂f/∂z = -2y

2kx = 0 => x = 0 (Equation 1) -kr + 2y - 2z = 0 => r = y - z (Equation 2) -2y = 0 => y = 0 (Equation 3)

From Equation 3, we can see that y = 0. Substituting this into Equation 2, we get:

r = 0 - z r = -z (Equation 4)

The Hessian matrix is given by:

H = | ∂²f/∂x² ∂²f/∂x∂y ∂²f/∂x∂z | | ∂²f/∂y∂x ∂²f/∂y² ∂²f/∂y∂z | | ∂²f/∂z∂x ∂²f/∂z∂y ∂²f/∂z² |

Calculating the second-order partial derivatives:

∂²f/∂x² = 2k ∂²f/∂y² = 2 ∂²f/∂z² = 0 ∂²f/∂x∂y = 0 ∂²f/∂y∂z = -2 ∂²f/∂z∂x = 0

Thus, the Hessian matrix becomes:

H = | 2k 0 0 | | 0 2 -2 | | 0 -2 0 |

D = ∂²f/∂x² ∂²f/∂y² ∂²f/∂z² + 2∂²f/∂x∂y ∂²f/∂y∂z ∂²f/∂z∂x - (∂²f/∂x² ∂²f/∂y∂z ∂²f/∂z∂x + ∂²f/∂y² ∂²f/∂z∂x ∂²f/∂x∂y ∂²f/∂z²)

Substituting the partial derivatives we calculated earlier:

D = (2k)(2)(0) + 2(0)(-2)(0) - (2k)(-2)(0) - (2)(0)(0) D = 0

If the determinant D is zero, the second derivative test is inconclusive. In such cases, we need to consider the eigenvalues of the Hessian matrix.

To find the eigenvalues, we solve the characteristic equation:

det(H - λI) = 0

where λ is the eigenvalue and I is the identity matrix. Substituting the values from the Hessian matrix:

| 2k-λ 0 0 | | 0 2-λ -2 | | 0 -2 -λ |

The characteristic equation becomes:

(2k - λ)((2 - λ)(-λ) - (-2)(0)) - (0)((2 - λ)(-2) - (0)(0)) = 0 (2k - λ)(λ² - 2λ) = 0

From this equation, we can see that one eigenvalue is (2k - λ) = 0, which implies λ = 2k.

For our case, we have one eigenvalue (λ = 2k). Thus, the sign of λ depends on the value of k.

When k < 0, the point (0, 0, 0) is a nondegenerate local minimum. When k = 0, the second derivative test is inconclusive, and further analysis would be required to determine the nature of the critical point.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Find the value of x in the picture below. (round to nearest tenth if needed) THANK YOU FOR HELPING ME:)

Answers

Answer:

12 I believe

Step-by-step explanation:

[tex]12\sqrt{2}[/tex] x sin(45) = 12

I am pretty positive I am correct, I am sorry if I am off a little

If I fail this homework, I may get beat.

Answers

Answer:

Don't click the link its a virus

A data point far from the mean of both the x's and y's is always:
a) an influential point and an outlier
b) a leverage point and an influential point
c) an outlier and a leverage point
d) None of the above

Answers

The correct answer is c) an outlier and a leverage point.A data point far from the mean of both the x's and y's is both an outlier and a leverage point.

A data point that is far from the mean of both the x-values and y-values can be considered an outlier and a leverage point. An outlier is a data point that significantly deviates from the overall pattern of the data. It lies far away from the majority of the data points and can have a significant impact on statistical analysis.

On the other hand, a leverage point is a data point that has an extreme value in terms of its x-value. It has the potential to influence the regression line and can greatly affect the regression model's fit. Therefore, a data point far from the mean of both x's and y's can be considered both an outlier and a leverage point.

To learn more about mean  click here :

brainly.com/question/15526777

#SPJ11

Given a random sample size of n = 900 from a binomial probability distribution with P = 0.30.

a. Find the probability that the number of successes is greater than 310.
P(X ˃ 310) = _____ (round to four decimal places as needed and show work)

b. Find the probability that the number of successes is fewer than 250.
P(X ˂ 250) = _____ (round to four decimal places as needed and show work)

Answers

P(X < 250) = P(X ≤ 249) = 0 (approximately) Hence, P(X ˃ 310) = 0 and P(X ˂ 250) = 0.

Given a random sample size of n = 900 from a binomial probability distribution with P = 0.30. The probability that the number of successes is greater than 310 and the probability that the number of successes is fewer than 250 are to be found.

Solution: a)We know that P(X > 310) can be found using normal approximation.

We have to check whether np and nq are greater than or equal to 10 or not, where p=0.30, q=0.70 and n=900.

Here, np = 900*0.30 = 270 and nq = 900*0.70 = 630. Since np and nq are greater than or equal to 10, we can use normal approximation for this binomial distribution.

Using the normal approximation formula, z = (X - μ) / σwhere X = 310, μ = np and σ = √(npq), we getz = (310 - 270) / √(900*0.30*0.70)z = 4.25

Using the z-table, the probability of z being greater than 4.25 is almost zero.

Therefore, P(X > 310) = P(X ≥ 311) = 0 (approximately)

b)We know that P(X < 250) can be found using normal approximation. We have to check whether np and nq are greater than or equal to 10 or not, where p=0.30, q=0.70 and n=900.  

Here, np = 900*0.30 = 270 and nq = 900*0.70 = 630.

Since np and nq are greater than or equal to 10, we can use normal approximation for this binomial distribution.

Using the normal approximation formula,z = (X - μ) / σwhere X = 250, μ = np and σ = √(npq), we getz = (250 - 270) / √(900*0.30*0.70)z = -4.25Using the z-table, the probability of z being less than -4.25 is almost zero.

To Know more about  binomial probability distribution visit:

https://brainly.com/question/15902935

#SPJ11

Given data: n = 900, P = 0.30.

a. The probability that the number of successes is greater than 310 is 0.0000.

b. The probability that the number of successes is fewer than 250 is 0.0174.

a. The formula for finding probability of binomial distribution is:

P(X > x) = 1 - P(X ≤ x)

P(X > 310) = 1 - P(X ≤ 310)

Mean μ = np

= 900 × 0.30

= 270

Variance σ² = npq

= 900 × 0.30 × 0.70

= 189

Standard deviation

σ = √σ²

= √189

z = (x - μ) / σ

z = (310 - 270) / √189

z = 4.32

Using normal approximation,

P(X > 310) = P(Z > 4.32)

= 0.00001673

Using calculator, P(X > 310) = 0.0000(rounded to four decimal places)

b. P(X < 250)

Mean μ = np

= 900 × 0.30

= 270

Variance σ² = npq

= 900 × 0.30 × 0.70

= 189

Standard deviation

σ = √σ²

= √189

z = (x - μ) / σ

z = (250 - 270) / √189

z = -2.12

Using normal approximation, P(X < 250) = P(Z < -2.12) = 0.0174.

Using calculator, P(X < 250) = 0.0174(rounded to four decimal places).

Therefore, the probability that the number of successes is greater than 310 is 0.0000 and the probability that the number of successes is fewer than 250 is 0.0174.

To know more about Binomial distribution, visit:

https://brainly.com/question/29137961

#SPJ11

A wire of 44cm long is cut into two parts. Each part is bent to form a square. Given that the total area of the two squares is 65cm^2, find the perimeter of each square.

Hi pls helppppp​

Answers

Answer:

4225

Step-by-step explanation:

65x65=4225

The radius of a circle is 8 inches. What is the area?

r=8 in

Give the exact answer in simplest form.

Answers

Answer:

Radius = 8 inches

Area = [tex]\pi {r}^{2} [/tex]

[tex]area = \pi( {8}^{2})[/tex]

[tex] = 64\pi \: square \: inches[/tex]

A = [tex]201.06 ^{2} \: inches[/tex]

Step-by-step explanation:

Hope it is helpful....

Answer this question to get marked as barinliest!!!!

Answers

Area= units to the second
Volume= units to the third
Circumference= units to the second
Circumferences just units

Use the table to determine a reasonable estimate for limStartFraction 2 x squared minus x + 15 Over x cubed minus 5 x minus 12 EndFraction as x approaches 3? One-half One-fourth 3 DNE

Answers

The reasonable estimate for limStartFraction 2 x squared minus x + 15 Over x cubed minus 5 x minus 12 EndFraction as x approaches 3 is [tex]\dfrac{1}{2}[/tex]

Given the limit of a function expressed as:

[tex]\lim_{x \to 3}\frac{2x^2-x+15}{x^3-5x-12}[/tex]

First, we need to substitute x = 3 into the function to have:

[tex]=\frac{2(3)^2-3+15}{3^3-5(3)-12}\\=\frac{18-3+15}{27-15-12}\\=\frac{0}{0} (indeterminate)[/tex]

Apply l'hospital rule on the function:

[tex]=\lim_{x \to 3}\frac{\frac{d}{dx} (2x^2-x+15)}{\frac{d}{dx} (x^3-5x-12)}\\=\lim_{x \to 3}\frac{4x-1}{3x^2-5}\\[/tex]

Subtitute x = 3 into the result

[tex]=\frac{4(3)-1}{3(3)^2-5}\\=\frac{12-1}{27-5}\\=\frac{11}{22}\\=\frac{1}{2}[/tex]

Hence the reasonable estimate for limStartFraction 2 x squared minus x + 15 Over x cubed minus 5 x minus 12 EndFraction as x approaches 3 is [tex]\dfrac{1}{2}[/tex]

Learn more here: https://brainly.com/question/23935467

Answer:

1/2

Step-by-step explanation:

i am in your walls

What is the value of x in the equation 13−2(+4)=8+1 13 x − 2 ( x + 4 ) = 8 x + 1 ?

Answers

Answer: x= 12/103

alternate form x =0.116505

Step-by-step explanation:

Try Photo math! It explains step by step!

Hope this helps!!!!

ANSWERRRRRR :puppy eyes emoji:

Answers

Answer:

A rhombus is a special type of parallelogram

Step-by-step explanation:

Similarities in a rhombus and parallelogram:

Both pairs of opposite sides are equal and parallel.Diagonals bisect each other and are unequal.Opposite angles are equal.None of the angles is 90 degrees.

A rhombus is a special type of parallelogram in that

All its sides are equal.The diagonals bisect each other at right angles.Each diagonal bisects the angle at the vertices.

If Thomas maintains a rate of 20 miles per hour riding his bicycle in a rally that covers 24 miles, how long will it take him to complete the race?
O 2 hours
O 1.2 hours
O 0.8 hours
O 2.4 hours​

Answers

Answer:

1h=20m

60/4

0,25min+1h

1+0,25

=1,2

He will complete the race in 1.2 hours time.

Hence, option B is correct.

What is Measurement unit?

A measurement unit is a standard quality used to express a physical quantity. Also it refers to the comparison between the unknown quantity with the known quantity.

Given that,

The distance completing in 1 hour = 20 miles

So 1 miles of distance is covered in = 1/20 hours

It is also given that,

The distance of rally = 24 miles.

Therefore,

The time taken to cover 24 miles = 24/20

                                                        = 1.2

Thus,

The required time = 1.2 hours

to learn more about the measurement unit visit:

https://brainly.com/question/777464

#SPJ2

John is cutting 3 wooden sticks to build part of a kite frame. The part he is building must be a right triangle.
Select all the possible lengths, in inches, of the sticks John could cut to make a right triangle.
A. 6, 8, 10
B. 2, 5, 10
C. 2, 3, 5
D. 12, 16, 20
E. 3, 4, 13

Answers

Answer:

I found 2 answers for this one

Step-by-step explanation:

B- 2,5,10

D-12,16,20

The possible length in inches of the stick that will make a right angle triangle are as follows

6, 8, 1012, 16, 20

What is a right angle triangle?

A right angle triangle has one of its angles as 90 degrees.

The right angle triangle must obeys the Pythagorean theorem.

c² = a² + b²

where

c = hypotenusea and b are the other legs.

Therefore, the sides that makes a right angle are as follows:

6, 8 , 10 : 6² + 8² = 10²

12, 16, 20 : 12² + 16² = 20²

learn more on right triangle here: https://brainly.com/question/12251384

#SPJ2

Open Ended Questions
Show all work to receive full credit
16. Use the model for vertical motion given by the equation h = -16t^2 + vt +s, where h is the
height in feet, t is the time in seconds, v is the initial upward velocity, and s is the initial height
in feet.
A. Rick tossed a baseball in the air from a height of 15 feet with an initial upward velocity of 8
feet per second. How long was the ball in the air before it hit the ground?
B. How high was the ball after 1 second?

Answers

Answer:

Step-by-step explanation:

Find the equations of the images of the following lines when reflected in the x-axis. a.y= 3x b.y= -x c. x = 0.

Answers

The equations of the images are after the transformations are

a. y = -3x

b. y = x

c. x = 0

How to determine the equations of the images

From the question, we have the following parameters that can be used in our computation:

a. y = 3x

b. y = -x

c. x = 0.

The rule of the lines when reflected in the x-axis is

(x, y) = (x, -y)

This means that the functions are negated

So, we have the images to be

a. y = -3x

b. y = x

c. x = 0

Hence, the equations of the images are

a. y = -3x

b. y = x

c. x = 0

Read more about transformation at

https://brainly.com/question/27224272

#SPJ4

What is the value of y in the equation 4 + y=-3?
7
1
-1
-7

Answers

Answer: -7

Because if y is -7 then the equation would be 4 - 7 = -3 which is true :)

The blue segments below is a diameter of oo. What is the length of the radius of the circle?

Answers

Answer:

C. 5.1 units

Step-by-step explanation:

Given Information :

Diameter : 10.2 units

Radius (r) = ?

[tex]r = \frac{d}{2} [/tex]

Input the values

[tex]r = \frac{10.2}{2} \\ \\ r = 5.1[/tex]

There are 96 children in a room.
40 of them are girls.
Find the fraction of the children that are boys.
Write your answer in its simplest form.
I will need it by this midnight

Answers

Answer:

7/12

Step-by-step explanation:

Basically to find the boys fraction I subtracted 40 from 96 and got 56. Your answer for the number of boys would be 56/96. I divided 4 from each and got 14/24. lastly I divide by 2 and got 7/12.

Introduction
Scientists have established a timeline of events after the Big Bang, based on astronomical observations and our understanding of the physical laws of the universe, such as gravity and the speed of light. In this lab activity, you will gather evidence to support the Big Bang theory.
Problem:
How can models demonstrate theories of our expanding universe?
Hypothesis:
Review the virtual lab demonstration in the lesson and stop the video when prompted to formulate a hypothesis. Hypothesize (or predict) what will happen to the distances between the labeled circles when you blow up the balloon ¼ full, ½ full, and ¾ full. Remember to include independent and dependent variables in your hypothesis.
The carbon dioxide represents how galaxies will spread out.
Materials:
Watch the virtual lab demonstration video within the lesson. No additional materials are needed.
Variables:
For this investigation:
List the independent variable(s):
List the dependent variable(s):
List the controlled variable(s):
Procedures:

1. Watch the virtual lab demonstration video within the lesson and record your observations in Table 1.
2. Using your expanding universe data from Table 1, construct a line graph using the volume of the below on the X axis and the distance between points on the Y axis. Be sure to include units and add titles to the graphs. Refer to the graph example and graphing tutorial in the lesson if needed.
3. Complete the Questions and Conclusion section of the lab report.
Data and Observations:
Table 1: Expanding Universe Observations


Galaxies Distance: Uninflated balloon (centimeters)
Distance: ¼ full (centimeters) Distance: ½ full (centimeters) Distance: ¾ full (centimeters)
A to B
A to C
A to D
B to C
B to D
C to D

Construct a line graph using the expanding the universe data from table 1. The volume will be plotted on the x-axis. The distance between the points will be plotted on the y-axis. Be sure to include units and add titles to the graph. Refer to the graph example and graphing tutorial in the lesson if needed.
Place your graph here.
Questions and Conclusion
1. How does the density and distribution of your “stars” change as the balloon expands?
2. How does your expanding balloon model represent an expanding universe?
3. What are some shortcomings of using this model as a replica of universe expansion?
4. How does the model you created help to show that the Steady State theory is inaccurate?
5. Suggest a way that a scientist could create an even more accurate model of universe expansion.
6. What will happen to the gravitational force between stars as the universe continues to expand?
In conclusion, how did your prediction of distances between points compare to your experimental results? All I truly need is the variables question 3 and 5 and I’m good :) thank you <3 this is for science but I didn’t know which one to pick so I picked a random one lol

Answers

For scientific tools to be measured at such a height...you must first begin multiplication and do the simple division.

What are the solutions of the system?
Sy=2x+6
\y= r2 +5 +6
O (0, -3) and (6, 0)
O(-3,0) and (-2, 0)
O (-3, 0) and (0, 6)
O
(0, 6) and (-2, 0)
ہے
1 2

Answers

The solution to the system is {eq}(x, y) = (2, 1){/eq}. For the given system, we have the solutions (-3, 0) and (0, 6).

To solve a system of equations, we must find the value of each variable that satisfies both equations. One of the most common methods for solving systems of equations is called substitution.

In substitution, we solve for one variable in one equation and then plug that expression into the other equation.

For example, if we have the system {eq}2x + y = 5,

\quad 4x - y = 7 {/eq},

we can solve for y in the first equation: {eq}y = 5 - 2x {/eq} Then we substitute this expression for y into the second equation:

{eq}4x - (5 - 2x) = 7 {/eq}

Simplifying gives {eq}6x = 12 {/eq}, or {eq}x = 2 {/eq} Once we have a value for one variable, we can substitute it into either equation to find the value of the other variable.

Using {eq}y = 5 - 2x {/eq}, we have {eq}y = 5 - 2(2) = 1 {/eq}These solutions represent the values of x and y that satisfy both equations in the system. To check,

we can substitute each solution into both equations to ensure they are valid. If both equations are satisfied, then we have found the correct solutions.

To learn more about : solution

https://brainly.com/question/24644930

#SPJ8

Which comparison is not correct?

-2 > -7
1 < -9
-3 > -8
6 > 5

Answers

Answer:

1 < -9

Step-by-step explanation:

A positive number can't be less than a negative

1 < -9
.......................

(4c+3)+(5b+8) simplify this answer

Answers

Answer:

4c + 5b + 11

Step-by-step explanation:

4c + 3 + 5b + 8

4c + 5b + 11

Let f(x)= e = 1+x. - a) Show that f has at least one real root (i.e. a number c such that f(c) = 0). b) Show that f cannot have more than one real root.

Answers

The function f(x) = e^(1+x) has at least one real root. The function f(x) = e^(1+x) cannot have more than one real root.

To show that f(x) has at least one real root, we need to find a value of x for which f(x) equals zero. Let's set f(x) = 0 and solve for x:

e^(1+x) = 0

Since e^(1+x) is always positive for any real value of x, there is no value of x that makes f(x) equal to zero. Hence, f(x) = e^(1+x) does not have any real roots. Therefore, we cannot show that f(x) has at least one real root.

b)

To show that f(x) cannot have more than one real root, we need to demonstrate that there cannot be two distinct real values, say c1 and c2, such that f(c1) = f(c2) = 0. Let's assume that f(x) = 0 at two distinct values, c1 and c2:

e^(1+c1) = e^(1+c2) = 0

However, this equation is not possible since e^(1+c1) and e^(1+c2) are always positive for any real values of c1 and c2. Therefore, f(x) = e^(1+x) cannot have more than one real root.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

Other Questions
5 6 7 10 11 12 13 14 15 16 6678 17 18 19 20 22 23 24 K M a It was determined the Unearned Landscaping Revenue balance should be $18,000, since $12,000 of these services were provided to customers duri One of the managers explained, "All the sections' performances are benchmarked against each other". Specify the managerial function that the manager is conducting in this statement. ABS engineering decided to build and new factory to produce electrical parts for computer manufacturers. They will rent a small factory for 2,000dhe per month while utilities will cost 500dhs per month, they had to pay 8000hs for municipality for water and electricity connection fees. On the other hand they will rent production equipment at a monthly cost of 4,000dhs. they estimated the material cost per unit will be 20dhs, and the labor cost will be 15dhs per unit. They need to hire a manager and security for with a salary of 30,000 and 5,000dhs per month each. Advertising and promotion will cost cost them 3,500dhs per month. Required: 1- 2- Calculate the total Fixed cost- 3- Calculate the total variable cost per unite 4- If the machine max production capacity is 10000 units per month, what is the selling price they should set to break even monthly? 5- If they to earn a profit equal to 10,000 per month, for how much he should sell the unit?- 6. What is the fixed cost per unit at maximum production? 7- What is the total variable cost at maximum production?= 8- If they set the selling price for 80DHS on max production and managed to reduce the total fixed cost by 3% what is the profit increase percentage- 9- If they set the selling price for 800HS on max production and managed to reduce the total variable cost by 3% what is the profit increase percentage Please answer parts a. and b.The rules of politics are not always the same as the rules ofeconomics. In discussions of setting budgets for governmentagencies, there is a strategy called "closing which expression is equivalent to (8x^7 y^8)? assume x>=0 a. xy^2(8x^3)b. 1x^3y^3(xy^2)c. 2x^3y^42xd. 4x^3y^4x two resistors in series are equivalent to 9.0 , and in parallel they are equivalent to 2.0 . what are the resistances of these two resistors? Did the Great Depression in Canada provide any economic lessonsfor government, business, or labour? What is cyclical unemployment and structural unemployment? What is the cure/solution for each one?The job guarantee and UBI are some radical policies proposed to help address the unemployment issue and lack of income due to the unemployment issue. Which one do you support more? Why? The forecasted demand for fudge for the next four months is 240, 150, 50, and 260 pounds. a. What is the recommended production rate if a level strategy is adopted with no backorders or stockouts? Wha A vector a has components a x equals -5. 00 m in a y equals 9. 00 meters find the magnitude and the direction of the vector One June 1, 2017, Mike Co loaned an employee $11000 for 9 months. The employee signed a note. The annual interest rate on the note will be 5%. The employee will pay the principal in and interest when it comes due in 2018.When the note comes due in 2018, the credit to interest revenue will be $_____ fill in the blank: in scrum, the _____ often assumes the role of the scrum master. Competition is high in the fast-food industry, particularly in the busy areas such as the central business districts. A healthy food company with a range of healthy fast-food items is evaluating its business-level strategy.Describe 3 business-level strategies (6 marks) FILL THE BLANK. "If you want to compare the present value of the future cashinflows of a project with its initial cost, you should use the_______ method of analysis.A. paybackB. incremental IRRC. profitability in" MULTIPLE CHOICE QUESTIONS 1. CVP analysis can be used to study the effect of: A. changes in selling prices on a company's profitability. B. changes in variable costs on a company's profitability. C. c The partners who own Lane Rafts Co wished to avoid the unlimited personal liability of the partnership form of business, so they incorporated as Lane Rafts, Inc. The charter from the stals of Nevada a The error of rejecting a true null hypothesis is:a. Type I errorb. Type II errorc. Is the same as d. Committed when not enough information is available Jen and Cassian earned $650,000 in salaries and $36,000 ininterest income during the year. They had a $26,000 loss from aSchedule C and Rental income of $8,500. They had $53,000 initemized deductio Given: ABCAB=BCPABC=50PABD=40Find: BD true/false. operational innovation dramatically improves the physical design and features of products, thereby enabling customers to achieve improved outcomes.