Determine the possible traits of the calves if:
A red bull (RR) is mated to a red (RR) cow 1
Answer:
A red (RR) bullis mated with white (WW) cow 1
Answer:
A roan (RW) is mated with red(RR)cow 3
Answer:​

According to the electronic configuration, along with platinum and gold silver is considered to be a noble metal.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.

Learn more about electronic configuration,here:

https://brainly.com/question/29757010

#SPJ2

Explanation:

i think the answer might be D

Answer:

Sunlight provide light energy.

Chlorophyll absorb light.

Explanation:

Sunlight provide light energy or give light energy from sun and it is use to produce glucose from carbondioxide and water which is also a source of energy.

Chlorophyll absorbs light energy and use it to convert carbondioxide and water into glucose and oxygen or it captures sun rays and produce glucose and water.

Answer:

gold is metal which is a very good conductor for electric current and most chips are made out of it.

Answer:

The answer is D. gold

Explanation:

75 for all

Explanation:

Answer:

Explanation: Li= Lithium, Na= Sodium, K= Pottasium, Rb= Rubdium Cs= Cesiuna, Fr= Fransium

6. Energy levels increases as if you move down a group during the number of electrons increases again.

7. A charge with higher and effective nuclear charge makes greater attractions to the electrons, pulling the electrons cloud closer to the nucleus makes it in a smaller atomic radius.

8. Ge= Germanium, He= Helium, O=Oxygen, Barium

The type of clothe that you would wear when visiting the mesosphere are the winter clothes.

Mesosphere is used to describe the coldest part of the earth whose temperature is -85°C.

An individual that wants to visit such a cold area should wear clothes that would provide such with warmth such as the winter clothes.

Learn more about mesosphere here:

https://brainly.com/question/237087

#SPJ1

Answer:

Q = 4180 J

Explanation:

Given data:

Mass of water = 10.0 g

Initial temperature = 0°C

Final temperature = 100°C

Heat required = ?

Solution:

Specific heat capacity of water is 4.18 j/g.°C.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 100°C - 0°C

ΔT = 100°C

Q = 10.0 g ×4.18 j/g.°C × 100°C

Q = 4180 J

Answer:

(1) atomic numbers

Explanation:

The observed regularities in the properties of the elements on the periodic table are periodic functions of their atomic numbers.

The observed regularities in the properties of  the elements are periodic functions of their atomic numbers.

Modern periodic law states that "Properties of elements are a periodic function of their atomic number not by their atomic mass". Modern periodic law was proposed by Henry Moseley in 1913. Physical and chemical properties of elements depend on the number of electrons and their arrangement.

Thus properties of elements are periodic function of their atomic numbers and not atomic masses. If the properties of an element depend on number of proton and neutron then the properties are periodic function of their atomic mass so we can conclude that the observed regularities in the properties of  the elements are periodic functions of their  atomic numbers.

Learn more: https://brainly.com/question/19534915

Answer:

density because it S.I unit is derived from fundamentals

Explanation:

Many of the properties of organic molecules can be predicted based on the strength of their cohesive molecule-molecule interactions (i.e. how much the molecules want to stick together).  The boiling point (BP) and melting point (MP) of an organic molecule is related to: 1) the molecular weight of the molecule and 2) the "stickiness" of individual molecules for their neighbors.  

   For example, molecules in a liquid are held together by attractive interactions between molecules.  These interactions must be broken (by adding heat) in order to transition into the gas.  The stronger the cohesive interactions, the more heat that is necessary for the liquid-to-gas phase transition.  These same attractive molecule-molecule interactions have to be broken for a solid to liquid phase change.

Examples: (Rank the following molecules in terms of MP and BP.)

Introduction to intermolecular forces:

All of the attractive intermolecular forces are based on the electrostatic attraction of positive charges on one molecule with negative changes.  The stronger the charges, the stronger the attraction between molecules.

How to:

In general, comparisons can only be made between molecules with similar formulas or molecular weights.*  First, identify the functional groups in the molecules being compared.  Each functional group can form different types of intermolecular interactions (see the chart above).  Interactions higher up on the chart form stronger cohesive interactions and will have higher boiling points and melting points.

* Note that larger molecules usually have higher boiling points and melting points.  This is not because of their higher molecular weights but because they usually have greater surface areas with which to form more intermolecular interactions.  This is also why linear molecules tend to have higher MPs and BPs than branched (or more spherically shaped) molecules.  Linear molecules will have more surface area than a more spherically shaped molecule.

All three molecules have approximately the same molecular formula and molecular weights.  Only molecule A contains a strongly polarized or ionic functional group: an aldehyde.  The C=O group in aldehydes generate a strong molecular dipole (partial + and - charges).  Thus, it can form weak attractive dipole-dipole interactions, and A will have the highest boiling point and highest melting point in this series of compounds.

Molecules B and C are alkanes.  They can only form the weakest attractive dispersion interactions between their molecular surfaces.  Due to its long-thin shape, B will have a greater surface area and can form more dispersion interactions than the rounder C.  Therefore, B will have a higher boiling point and melting point than C.

Molecule A is ionic (it has charges).  Therefore, it can form the strongest ion-ion interactions and will have the highest boiling point and melting point.

Molecule B is a carboxylic acid with an acidic proton and basic lone pairs.  Therefore, it can form medium strength hydrogen bonding interactions, and it will have the next highest boiling point and melting point.

Molecule C is a carboxylic ester, which is a polar functional group.  However, it does not have an acidic proton.  Therefore, esters cannot form hydrogen bonds with themselves.  Instead, they can only form weak dipole-dipole interactions and will have the lowest boiling point and melting point in this series of compounds.

Answer:

Explanation:

By thinking about non covalent intermolecular interactions, we can also predict relative melting points. All of the same principles apply: stronger intermolecular interactions result in a higher melting point.

Answer:

26.35 mmHg

Explanation:

Given data:

Initial pressure = 65.0 mmHg

Initial temperature = 740 K

Final temperature = 300 K

Final pressure = ?

Solution:

According to Gay-Lussac Law,

The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.

Mathematical relationship:

P₁/T₁ = P₂/T₂

Now we will put the values in formula:

65 mmHg / 740 K = P₂/300 K

P₂ = 65 mmHg× 300 K  / 740 K

P₂ = 19500 mmHg. K /740 K

P₂ = 26.35 mmHg

Answer:

Magnify glass

Answer:

Fractional distillation

Explanation:

The separation of gasoline from crude oil by heating until it reaches its boiling point is a separation technique called fractional distillation.

Answer:selenium

Explanation:

Answer: Nether

Explanation: Because if you have one pound of Calcium and one pound of selenium there both the same weight  

Answer:

La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]

Explanation:

Un movimiento es rectilíneo uniformemente variado, cuando la trayectoria del móvil es una línea recta y su velocidad  varia la misma cantidad en cada unidad de tiempo . Dicho de otra manera, este movimiento se caracteriza por una trayectoria que es una línea recta y la velocidad cambia su módulo de manera uniforme: aumenta o disminuye en la misma cantidad por cada unidad de tiempo. Y la aceleración es constante y no nula (diferente de cero).

En este caso la posición del objeto esta dada por la expresión:

[tex]x=x0+v0*t+\frac{1}{2} *a*t^{2}[/tex]

donde x es la posición del cuerpo en un instante dado, x0 la posición en el instante inicial, v0 la velocidad inicial y a la aceleración.

En este caso, por un lado podes considerar:

Reemplazando obtenes:

[tex]90=v0*2+\frac{1}{2} *a*2^{2}[/tex]

[tex]90=v0*2+\frac{1}{2} *a*4[/tex]

[tex]90=v0*2+2*a[/tex]

Y por otro lado tenes:

Reemplazando obtenes:

[tex]120=v0*3+\frac{1}{2} *a*3^{2}[/tex]

[tex]120=v0*3+\frac{1}{2} *a*9[/tex]

[tex]120=v0*3+\frac{9}{2} *a[/tex]

Por lo que tenes el siguiente sistema de ecuaciones:

[tex]\left \{ {{2*v0+2*a=90} \atop {3*v0+\frac{9}{2} *a=120}} \right.[/tex]

Resolviendo por el método de sustitución, que consiste en aislar en una ecuación una de las dos incógnitas para sustituirla en la otra ecuación, obtenes:

Despejando v0 de la primera ecuación:

[tex]v0= \frac{90-2*a}{2}[/tex]

Reemplazando en la segunda ecuación:

[tex]120=\frac{90-2*a}{2} *3+\frac{9}{2} *a[/tex]

Resolviendo:

[tex]120=(90-2*a)*\frac{3}{2} +\frac{9}{2} *a[/tex]

[tex]120=135-3*a +\frac{9}{2} *a[/tex]

[tex]120-135=-3*a +\frac{9}{2} *a[/tex]

[tex]-15=\frac{3}{2} *a[/tex]

[tex]\frac{-15}{\frac{3}{2} } =a[/tex]

-10=a

Reemplazando el valor de a en la expresión despejada anteriormente obtenes:

[tex]v0= \frac{90-2*(-10)}{2}[/tex]

Resolviendo:

[tex]v0= \frac{90+20}{2}[/tex]

[tex]v0= \frac{110}{2}[/tex]

v0=55

La velocidad inicial es 55 [tex]\frac{m}{s}[/tex]y su aceleración es -10 [tex]\frac{m}{s^{2} }[/tex]

Answer:

Some animals and plant are only known to us as fossils. hope this helps. and have a nice day:)

Answer:

B.convection

Explanation:

Convection is the circular motion that happens when warmer air or liquid — which has faster-moving molecules, making it less dense — rises, while the cooler air or liquid drops down

Answer:

hard water is ice

Explanation:

ice is formed as the water temperature decreases and then it freezes

Answer:

When you wash your hands with soap, it dislodges the dirt, grease, oils, and disease-ridden fecal matter particles on your hands by creating these micelles. Surrounded by the soap, the oil molecules become suspended and distributed in the water rather than stubbornly clinging to your skin.

Explanation:

Answer:

The matter has changed size, shape, or form.

Explanation:

A new substance that is formed is creation.

if the matter changed from one substance to another this is called a chemical reaction.

Surely not. It won't change the molecular level.

Hope that helps.

Explanation:

Ammonium Fluoride and Potassium Sulphate

Answer:

Yes

Explanation:

You can have 2s and have part of the 2p of the row in the p section.

Answer:

Initially, the aluminum atom had a charge of +13 + (−13) = 0; in other words, its charge was neutral due to the equal numbers of protons and electrons. When it becomes an ion, it loses 3 electrons, leaving behind only 10. Now the charge is +13 + (−10) = +3.

Thank you and please rate me as brainliest as it will help me to level up

Answer:

Lipids

Explanation: Lipids are, in fact, the only non-polymer organic molecules.

Answer:

Metals on top of the activity series can displace metals at the bottom and they are highly reactive as compared to metals at the bottom of the series.

Hence, the order is X>W>Y>Z.

Answer:

D

Explanation:

i mean it's just taking the words of the question and putting them into an equation

[tex]\huge\boxed{Option C}[/tex]

As per Question,

It is saying that Benzene(organic compound) reacts with nitric acid. So,

Benzene and Nitric Acid are Reactants,

Nitrobenzene is the Product.

_________________________________________________________

General way of showing the reaction is,

In the following Question,

Benzene is Reactant no. 1,

Nitric Acid is Reactant no.2,

Nitrobenzene is Product no 1,

Water is a By Product.

Answer:

Lead phosphate

Explanation:

Pb3(po4)2 has the compounded name of lead(II) phosphate.

It is a white, crystalline solid that is insoluble in water. Lead(II) phosphate is used in some paints and plastics, and it is also used as a pigment.

The name of the compound is based on the oxidation state of the lead atom. Lead can have two oxidation states, +2 and +4. In Pb3(PO4)2, the lead atom has an oxidation state of +2, so the compound is named lead(II) phosphate.

The phosphate ion has an oxidation state of -3, so there are two phosphate ions in the compound to balance the +6 charge of the three lead atoms.

Find out more on lead(II) phosphate at https://brainly.com/question/7900817

#SPJ6

Answer:

The third answer

Explanation: