The minimum value of the coefficient of static friction which will prevent the blocks from moving in a pulley system is Fs=μsFN.
Create an inclination plane out of one of the materials, then place a body made of the other material on it to determine the minimum coefficient of static friction between the two. Up until the body begins to slide, steepen the incline. The coefficient of friction is the angle's tangent. A force that opposes motion is friction. Both static and kinetic friction work to keep a body at rest and to slow down its motion once it is moving. The normal force (FN), also known as the force produced perpendicularly by a body against the surface along which it is traveling, is proportional to the force generated by static friction (Fs). Fs=μsFN.
The properties of the two surfaces that are in contact with one another affect this coefficient.
To learn more about static friction click here https://brainly.com/question/13000653
#SPJ4
What is the magnitude of the net force on the first wire in (figure 1)? express your answer in newtons
0.00025 N is the magnitude of the net force on the first wire in (figure 1).
What is net force?The total of all forces exerted on an item is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the phrase "net force" is employed.
From the diagram, first wire has an attracting force from third wire at 0.04 m distance and a repelling force from second wire at 0.02 m distance.
Expression of the force is -
F = [µ ×π×(I)² × L] / (2πd)
When d = 0.02 m,
or, F = [4 ×π× 10⁻⁷(10)² × 0.50] / (2π × 0.02)
or, F = 0.0005 N
And when d = 0.04 m,
or, F = [4 ×π× 10⁻⁷(10)² × 0.50] / (2π × 0.04)
or, F = 0.00025 N
So, the net force on first wire = 0.005 - 0.00025
= 0.00025 N repelling or upward.
To know more about net force refer to:
https://brainly.com/question/12970081
#SPJ1
The complete question is as follows:
What is the magnitude of the net force on the first wire in (Figure 1)?
Express your answer in newtons.
a graphical presentation that uses vertical bars to display the magnitude of quantitative data is known as a
A graphical presentation that uses vertical bars to display the magnitude of quantitative data is known as a Column chart.
What is a Column chart?Column charts make use of vertical bars to compare several objects or categories. On one axis are the comparison categories, while on the other are the data values. They are helpful in illuminating the conditions at a specific time. Anything that can be counted, such the volume of items sold or website hits, can be represented in a column chart.
Using column charts, you may show how various numbers differ from one another. When there are significant differences in the data values, column charts—which are used to compare changes between groups over time—are easiest to understand.
If there are several categories to compare, a line graph could be easier to comprehend.
Column charts can be created using standard, stacked, or percentage forms. It is simpler to compare and identify trends in the data because the same data is presented in each format in a different way. The steps for creating conventional, stacked, and percentages charts are the same regardless of the outcome.
To learn more about column chart visit:
https://brainly.com/question/15507084
#SPJ1
sound is emitted by 20 w speaker (which propagates in all directions). what is the intensity in decibels at 10 m? 100m?
The intensity of sound in decibels at 10 m is 17.6 dB.
The intensity of sound in decibels at 100 m is 14.08 dB.
The formula to calculate intensity when power is given is I = P/A
where, I is the intensity
P is the power
A is the area
Given, P = 20 W
A₁ = 4πr² = 4π* 10² = 1256.64 m²
A₂ = 4πr² = 4π* 100² =125663.71 m²
I₁ = P / A₁ = 20/1256.64 = 0.0159 W/m²
I₂ = P / A₂ = 20/125663.71 = 0.000159 W/m²
The expression between intensity of sound and decibel level is
dB = 10* log (I/ 1.0* 10⁻¹² W/m²) --------(1)
Substituting the values of I₁ and I₂ in (1),
dB₁ = 10* log (1.5* 10⁻²/ 1.0* 10⁻¹²) = 10* log(1.5* 10¹⁰) = 10* [ log 1.5 + 10] = 10*(0.176* 10) = 17.6 dB
dB₂ = 10* log (1.5* 10⁻⁴/ 1.0* 10⁻¹²) = 10* log(1.5* 10⁸) = 10* [ log 1.5 + 8 ] = 10*(0.176* 8) = 14.08 dB
To know more about sound intensity:
https://brainly.com/question/14125844
#SPJ4
6. An ice skater is spinning at 60 RPM when she pulls in her arms and undergoes an angular acceleration of 10 rad/s"" for 0. 6 seconds. What was her final RPM and how many rotations did she spin during this time?
The final RPM of ice skater is 116.38.
RPM's meaning?RPM's meaning? per revolution
RPM, which stands for revolutions per minute, is a measure of how quickly a machine is operating at any one time. RPM is a measure used in automobiles to indicate how often the crankshaft completes one full rotation each minute as well as how frequently each piston rises and falls in its cylinder.
Briefing:
ω₀ = 6.2π rad/s
α= 10π rad/s
t = 4.2 s
Find: ω
ω = αt + ω₀
ω = 10 (0.6 s) + 6.2π rad/s
ω = 116.38RPM
To know more about RPM visit:
https://brainly.com/question/13834090
#SPJ4
Fig. 23-11 how the variation of the electric potential V (meaured in Volt) a a function of the radial direction r (meaured in meter). For which range of r i the magnitude of the electric field the larget?
As you walk away from the charge, the potential becomes less negative and actually grows, coming closer and closer to zero.
If you are infinitely far away from the charge, the potential for both positive and negative charges is zero. The electric potential (also known as the electric field potential, potential drop, or electrostatic potential) is defined as the amount of work energy required to transport a unit of electric charge in an electric field from a reference point to a specified place. The Volt difference dropped across a fixed resistance of one ohm with a current of one ampere running through it is the unit of potential difference formed between two locations.
dV
V=5x \s2 \s −10x−9
dx dV \s \s
=10x−10
so, E=−(10x−10)
The value of E=(1010)
=0V/m for
x=1m
Learn more about electric here-
https://brainly.com/question/8971780
#SPJ4
Based on your observations, which of the following factors affect the trajectory of an object or body in flight? Select all that apply. Projection angle Mass of the object Size (diameter) of the object Height of the object at take-off Initial velocity
On the basis of the observation the factors that affect the trajectory of an object in flight is the projection angle and initial velocity.
The equation of the trajectory of the path thrown at some angle is given as,
Y = xtanA - gx²/2v²cos²A
Here,
Y is the vertical displacement, x is the horizontal displacement while g is the gravitational acceleration, V is the initial velocity and A is the angle at which the particle is thrown.
Among all the factors given the trajectory of the particle only depends on the projection angle and the initial velocity of the particle.
To know more about trajectory of a particle, visit,
https://brainly.com/question/12084203
#SPJ4
you replace a 100-watt light bulb with a 25-watt compact fluorescent bulb. over a 10,000 hr life, how much energy, in kilowatt-hours, do you save? if electricity costs $0.15 per kilowatt-hour how much money do you save?
If you replace a 100-watt light bulb with a 25-watt compact fluorescent bulb, over a 10,000 hr life, you will save electricity bill of $112,5
A fluorescent bulb is more energy efficient than an incandescent bulb. It produces the same amount of light with less electricity.
The energy used by the bulbs is often expressed in Kwh or kilowatt-hour.
The formula is:
Kilowatt-hours = power (in kilowatt) x time usage (in hours)
In the given problem:
Time usage = 10,000 hours
Light bulb:
Power = 100 watt = 0.1 kw
kwh = 0.1 x 10,000 = 1,000 kwh
electricity bill = 1000 kwh x $0.15/kwh = $150
fluorescent bulb
Power = 25 watt = 0.025 kw
kwh = 0.025 x 10,000 = 250 kwh
electricity bill = 250 kwh x $0.15/kwh = $37,5
Money save = $150 - $37,5 = $112,5
Learn more about kilowatt-hour here:
https://brainly.com/question/9821162
#SPJ4
17. two identical waves undergo pure constructive interference. is the resultant intensity twice that of the individual waves? explain your answer.
According to the question, two identical waves undergo pure constructive interference, resultant intensity is quadruple individual wave intensity.
What is sound wave interference?When two or even more sound waves are present at once from distinct sources, they interact with one another to create a new wave. The combination of all previous waves results in the new wave. Interference is the term for wave interaction.
What is a good illustration of interference?The reflecting light from an oil coating floating on water is one of the best illustrations of interference. Another illustration is the thin coating of a soap bubble (shown in Figure 1), which, when illuminated by either natural or synthetic light sources, reflects a variety of lovely colors.
To learn more about interference visit:
https://brainly.com/question/16098226
#SPJ4
The planet mercury orbit around the sun is an ellipse eccentricity 0.206 length of major axis us 1.16×10 the power of 8 km. the sun at one focus
1,What is the maximum distance from mercury to the sun
2,what is the minimum distance b/n them
The maximum distance from mercury to the sun is 0.58 * 10⁸ km.
The minimum distance b/n them is 0.46 * 10⁸ km.
What is the distance about?The shape of an elliptical orbit can be described by its eccentricity, which is a measure of how "flattened" the ellipse is. An eccentricity of 0 indicates a circular orbit, while an eccentricity of 1 indicates a parabolic orbit.
In the case of Mercury's orbit, the eccentricity is given as 0.206, which means that the orbit is slightly flattened, but still close to circular. The length of the major axis of the ellipse is given as 1.16 * 10⁸ km.
To find the maximum distance from Mercury to the sun (also known as the aphelion), we need to find the distance from the center of the ellipse to the farthest point on the ellipse (which is at the top of the major axis). This distance is equal to half of the length of the major axis. Thus, the maximum distance from Mercury to the sun is:
1.16 * 10⁸ km / 2 =0.58 * 10⁸ km
To find the minimum distance between Mercury and the sun (also known as the perihelion), we need to find the distance from the center of the ellipse to the closest point on the ellipse (which is at the bottom of the major axis). This distance is equal to half of the length of the major axis times the square root of 1 - (eccentricity)². Thus, the minimum distance between Mercury and the sun is:
[tex](1.16 x 10^8 km / 2) * \sqrt{(1 - (0.206)^2) } = 0.46 * 10^8 km[/tex]
Therefore, Note that the sun is located at one of the foci of the elliptical orbit, rather than at the center. However, since the eccentricity of Mercury's orbit is relatively small (0.206), the distance from the center of the ellipse to either focus is very close to the distance from the center to the top or bottom of the major axis, and the difference can be ignored for most purposes.
Learn more about distance from
https://brainly.com/question/17205917
#SPJ1
consider the standing wave on a guitar string and the sound wave generated by the guitar as a result of this vibration. what do these two waves have in common?
The frequency between them is equal. A guitar string vibrates transversely when it is plucked, whereas the sound it makes creates a longitudinal wave in the atmosphere.
When a string is plucked, the bridge transmits the vibration, which reverberates throughout the top of the guitar. Additionally, it travels to the instrument's back and sides before resonating through the body's air and emitting sound out the sound hole. The traces on the diagram connect at nodes, which are places in the standing wave pattern where the string is completely stationary. Antinodes, where the string goes up and down the most, are seen in between nodes.
Learn more about frequency here-
https://brainly.com/question/4671819
#SPJ4
a ball is launched up in the air from ground level with a velocity of 12 m/s. what is its velocity when it hits the ground?
Initial speed (vo) equals 12 m/s, and gravity (g) equals -9.8 m/s. When it lands, it will have a velocity of 2.
What is an easy way to define velocity?A particle or object's movement with the passage of time is expressed vectorially as velocity. The meter per second (m/s), usually referred to as speed, is the acknowledged unit of velocity magnitude.
Why does velocity formula exist?According to the equation v = s/t, rate of change (v) is a dimensionless number that quantifies displacement (or a shift in position, s), over change in time (t).
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
if the demand function for money is m/p = 0.5y – 100r, then the slope of the lm curve is:
As a result, the slope of the LM curve is 0.005.
The ratio of the income sensitivity of real money demand over the interest sensitivity of real money demand determines the slope of the LM curve, which is represented by the coefficient of Y, k over h. With regard to monetary policy, this ratio is crucial.
The money supply function has an impact on the LM curve as well. The supply of money may become more susceptible to interest rates in the current environment of high levels and volatility of interest rates.
The general LM equation is written in terms of Y and r,
Where Money supply = Money demand,
0.5Y – 100r = (M/P) where (M/P) is a constant
100r = 0.5Y - (M/P)
r = 0.005Y - 0.01(M/P)
dr/dY = 0.005 is the slope of the LM function.
For more questions on Slope of LM Curve
https://brainly.com/question/30114657
#SPJ4
a pair of french bikers rode from paris to qatar for the world cup. a total of 7,000 kilometers in __ months.
From Paris to Qatar for the world cup, two French riders traveled by bicycle. In three months, 7,000 kilometers overall.
The Fédération Internationale de Football Association (FIFA), the world's governing organization of association football, and its senior men's national teams compete in the FIFA World Cup, commonly referred to as the World Cup. With the exception of 1942 and 1946, when it was postponed due to World War II, the tournament has been conducted every four years since its inception in 1930. The current winners are France, who captured their second championship during the 2018 competition in Russia.
The structure uses a qualification round to choose the teams that advance to the tournament phase, which occurs over the previous three years. 32 teams fight for the title at sites in the host country or nations during the tournament round.
Learn more about world cup here:
https://brainly.com/question/29487961
#SPJ4
how much heat transfer (in j) occurs from a system if its internal energy decreased by 300 j while it was doing 16.0 j of work? (enter the magnitude.)
The system released 134 J of energy into the surrounding while doing 16 J of work.
What is energy ?
The ability to exert a force that causes an item to move is what is meant by the definition of energy as the "power to accomplish work."
We use thermodynamics principles in this situation. There are already obtained relationships for intense properties like internal energy (U), heat transfer (Q), and work (W) that were based on differential equations. The formula is
ΔU = Q + W
But since these factors depend on their signs, we must remember to take them into account. Van Ness, Smith, and Abbott assert that declining has a negative sign convention. If work is being done ON the system, the sign is positive; however, if work is being done BY the system, the sign is negative. in this instance,
ΔU = -150 J
W = -16 J
Then , we can determine Q as follows
- 150 J = Q - 16 J
Q = - 134 J
Thus 134 J of heat of released by the system into the surroundings.
To learn more about heat click here:
https://brainly.com/question/13411214
#SPJ4
Dad pulls his daughter Sarah (Sarah and sled combined mass 60 kg) on a sled, pulling on a rope with a force of 300 N at an angle of 30° above the horizontal. If we neglect friction force: What is the normal force acting on the sled/Sarah system?
Answer: Fn = 450 N
Explanation:
Part of the tension acts in the upward y-direction, reducing the normal force.
ΣFy = Fn + Ftsin(30)-Fg
0 = Fn + (300 N)sin(30) - (60 kg)(10 m/s^2)
0 = Fn + 150 N - 600 N
0 = Fn - 450 N
Fn = 450 N
two initially uncharged metal spheres are mounted on insulating stand and placed in contact with each other, as shown. a student brings a positively charged insulating rod near sphere 1, sphere 2 is then removed, and finally the rod is moved away. what is the net charge on sphere 1?
They represent a simple explanation of our basic charge interactions, best recognized by the jingle "opposites attract, likes repel."
B and C are also untrue for the same reason; they contradict the fundamental statement of charge interactions. E and H are correct. To become charged, an object must either gain or lose electrons. Losing electrons causes more positive charge than negative charge, resulting in a positively charged item. Gaining electrons causes more negative charge than positive charge, resulting in a negatively charged item. Protons are securely linked in atom nuclei and can never be added or withdrawn by regular electrostatic means. The same argument leads to the rejection of options F and G as possible true.
Learn more about electrostatic here-
https://brainly.com/question/14889552
#SPJ4
What are three thing you reearched about how earthquake tart and how they travel
Whenever the ground is hit with enough force to crack or break, an earthquake results. Tectonic plate boundaries are linked to the majority of earthquakes.
What is earthquake explain?An earthquake is a quick movement of geological materials beneath the earth's surface that causes the ground to shake violently or weakly. The tectonic plate boundary is where the earthquakes start.
What is earthquake and its effects?The earthquake is the sudden energy released from the earth's crust that causes the earth's surface to shake. Seismic waves, also called S waves, are consequently produced. The type and severity of an earthquake are based on the local seismic activity.
To know more about earthquake visit:
brainly.com/question/23009699
#SPJ4
A block is released from rest on an inclined
plane and moves 3.4 m during the next 5.5 s.
The acceleration of gravity is 9.8 m/s^2
What is the frictional force acting on the
13 kg mass?
Answer in units of N.
The frictional force acting on the 13 kg mass is 40.65 N.
What is the acceleration of the block?
The acceleration of the block is calculated by applying the following kinematic equation as shown below.
s = ut + ¹/₂at²
where;
u is the initial velocity of the block = 0t is the time of motion of the blocka is the acceleration of the blocks is the distance travelled by the blocks = 0 + ¹/₂at²
¹/₂at² = s
at² = 2s
a = 2s / t²
a = (2 x 3.4) / (5.5²)
a = 0.225 m/s²
The frictional force acting on the 13 kg mass is calculated as follows;
W sinθ - F = ma
where;
W is the weight of the blockθ is the angle of inclination of the blockF is the frictional forcem is the mass of the blocka is the acceleration of the block(13 x 9.8 x sin20) - F = 13 x 0.225
43.57 - F = 2.925
F = 43.57 - 2.925
F = 40.65 N
Learn more about frictional force here: https://brainly.com/question/4618599
#SPJ1
when a nucleus of 235u undergoes fission, it breaks into two smaller, more tightly bound fragments. t or f
The fragments reaction is 7.59 MeV/nucleon and 8.39 MeV/nucleon
What is nucleus ?
Neutrons and protons, which have opposite electric charges, make up atomic nuclei. The strongest basic force now understood, known as the strong force, is what holds these things together. A normal atom's nucleus generally holds more than 99.9% of the atom's mass yet takes up considerably less than.01 percent of its volume.
What is fission ?
When a neutron collides with a bigger atom, it excites it and causes it to split into two smaller atoms, which are known as fission products. This process is known as fission. A chain reaction might start as a result of additional neutrons that are also emitted. Huge amounts of energy are produced during the splitting of each atom.
1) m_proton + m_netron + m_electron - m_U
= 92*1.007276466812 + 92*5.4857990943e-4 + 143*1.008664916 - (235.0439299)
= 1.9151 u
= 931.494061 * 1.9151 MeV
= 1784 MeV
= 1784/235 = 7.59 MeV/nucleon
2) m_proton + m_netron + m_electron - m_Cs
= 55*1.007276466812 + 55*5.4857990943e-4 + 82*1.008664916 - (136.9070895)
= 1.2338 u
= 931.494061 * 1.2338 MeV
= 1149 MeV
= 1145/137 = 8.39 MeV/nucleon
Therefore, the fragments reaction is 7.59 MeV/nucleon and 8.39 MeV/nucleon.
Learn more about nucleus from the given link.
https://brainly.com/question/141626
#SPJ4
a generator supplies 100 v to a transformer's primary coil, which has 50 turns. if the secondary coil has 500 turns, what is the secondary voltage?
According to the question if the secondary coil of transformer has 500 turns, the secondary voltage is 1000 V.
What are transformers and what varieties exist?Transformers for power, transformers for distribution, and transformers for isolation, in that sequence. We have Dual Winding Transformer and Autotransformers based on windings. We offer Core Type Transformers, Shell Type Transformers, and Berry Type Transformers based on core designs.
Briefing:For an ideal transformer
Vs/Vp=Ns/Np
Given that primary voltage V =100 V
Number of turns in primary N = 50 turns
Number of turns in srcondary Ns = 500 turns
Therefore
Vs/100=500/50
Hence voltage across secondary Vs = 1000 V
To learn more about transformer visit:
https://brainly.com/question/15200241
#SPJ4
what is the expected mass of a potassium-39 nucleus, based on the total mass of its protons and neutrons?
The total mass of the protons and neutrons in a potassium-39 nucleus is 6.5307 x 10^-26 kilograms.
The mass of a potassium-39 nucleus can be calculated based on the total mass of its protons and neutrons. Potassium-39 is a stable isotope of potassium with 19 protons and 20 neutrons in its nucleus. The mass of a proton is approximately 1.6726 x 10^-27 kilograms, and the mass of a neutron is approximately 1.6749 x 10^-27 kilograms.
Therefore, the total mass of the protons in a potassium-39 nucleus is 19 x 1.6726 x 10^-27 = 3.18094 x 10^-26 kilograms. The total mass of the neutrons in a potassium-39 nucleus is 20 x 1.6749 x 10^-27 = 3.3498 x 10^-26 kilograms.
The total mass of the protons and neutrons in a potassium-39 nucleus is therefore 3.18094 x 10^-26 + 3.3498 x 10^-26 = 6.5307 x 10^-26 kilograms. This is the expected mass of a potassium-39 nucleus, based on the total mass of its protons and neutrons.
Learn more about Potassium-39 here:
https://brainly.com/question/4991286
#SPJ4
where is the center of gravity of the man doing the classic yoga poses shown in (figure 1)?
The center of gravity of the man doing the classic yoga poses will be as shown in first figure.
The Center of Gravity is the theoretical point in the body where the body's total weight is expected to exert force. It is important to know the center of gravity because it predicts the behavior of a body's movement when obeying gravity. It is also used in the construction of static structures such as buildings and bridges.
In a modern gravitational field, the center of gravity is identical to the center of mass. However, the two concepts do not always coincide. For the moon, the center of mass is very close to its geometric center. However, its center of gravity is slightly lower than Earth's due to the strong gravitational force of the nearby moon.
In a symmetrically shaped object made of homogenous materials, the center of gravity will match the body's geometric location. However, an asymmetrical object consisting of many components with different dimensions will have its center of gravity at some distance from its geometric center. In the hollow body or irregularly shaped body, the center of gravity in a point outside the body material.
For more such questions on Center of gravity:
https://brainly.com/question/20662235
#SPJ4
thermal expansion, pressure release, and mineral, frost, and root wedging all are weathering processes.
Mechanical weathering mechanisms include pressure release, thermal expansion, frost and root wedging. Weathering that occurs mechanically is sometimes called physical weathering.
This is typically referred to as thermal expansion. The fractional change in volume or length per unit change in temperature can be referred to as thermal expansion. Typically, the linear expansion coefficient is used when dealing with a solid expansion. The force perpendicular to an object's surface that is delivered per unit area over that force is known as pressure (symbol: p or P). The gauge pressure, also known as gauge pressure, is the pressure in relation to the surrounding air pressure. To express pressure, a variety of units are employed.
Learn more about thermal expansion here
https://brainly.com/question/14092908
#SPJ4
The complete question is -
Thermal expansion, pressure release, and mineral, frost, and root wedging all are ________ weathering processes.
freddy frog drops vertically from a tree onto a horizontally-moving skateboard. the reason he doesn't slip off the skateboard is due to
The reason the frog doesn't slip is the friction between his feet and the board
Friction is the force that opposes the relative motion between two surfaces that are in contact. In the case of a skateboard, the static friction between the feet and the board helps to keep someone from slipping off when the skateboard is not moving. Once the skateboard begins to move, the static friction changes to kinetic friction and helps to keep it from slipping off as the skateboard moves.
The amount of friction between two surfaces depends on the nature of the surfaces and the force with which they are pressed together. Thus, when the Freddy frog drops vertically and lands on a skateboard, the friction between his feet and the surface of the skateboard helps to keep him from slipping off.
Read more about friction on:
https://brainly.com/question/23161460
#SPJ4
an airplane pilot wishes to fly due west. a wind of 88.0 km/h is blowing toward the south.
The pilot should head 12.09 degrees clockwise to the west direction.
The actual velocity of plane over ground is calculated to be 410.34 km/hr.
This question can be solved using the concept of resolution of vectors.
Any vector that is oriented at an angle to the horizontal (or vertical) can be thought of as having two parts: the direction vector and the tangent vector, according to the definition of a vector (or components). In other words, any vector with a two-dimensional direction may be conceived of as having two pieces.
a) Let us assume that the plane moves at an angle θ (clockwise to the west direction).
Let the velocity of plane be given by '[tex]v_{a} \\[/tex]'. Now this velocity [tex]v_{a}[/tex] has two components.
According to the figure
[tex]v_{a}[/tex]sinθ= [tex]v_{w}[/tex]
here [tex]v_{a}= 420 km/hr[/tex]
[tex]v_{w}= 88 km/hr[/tex]
420 sinθ= 88
sinθ= [tex]\frac{88}{420}[/tex]= 0.209
which gives θ= 12.09 degrees
b) The actual velocity of the plane over ground is given by [tex]v_{a}[/tex]cosθ
v= 420cos(12.09)= 420×0.977= 410.34 km/hr
Complete question:
An airplane pilot wishes to fly due west. A wind of 88.0 km/h is blowing toward the south. A. If the airspeed of the plane (its speed in still air) is 420.0 km/h , in which direction should the pilot head?
B. What is the speed of the plane over the ground?
We can learn more about vectors here:
https://brainly.com/question/13322477#
#SPJ4
carlton is experimenting with different shutter speeds. he takes a photo of cars driving by at 1/8 second shutter speed, 1/2 second shutter speed, 1/30 second shutter speed, and 1/500 second shutter speed. based on what you know about shutter speeds, which speed will create the clearest image of the moving cars?
Excellent for capturing fast-moving objects in great focus with minimal motion blur and with less ambient light in the environment.
A value of 1/250s or less is considered quick. When we say 1/250s, we imply one hundred and fifty-seconds. A shutter speed of 1/500s indicates that the shutter is open for one-fifth of a second. 1/250s is quicker than 1/500s. If the shutter speed is not a fraction (i.e. it is more than a second), it is sometimes preceded by a quote mark or " — for example, 8" is an eight second shutter speed while 8 is a 1/8 second shutter speed. The shutter speed is frequently displayed on cameras with a top-mounted LCD screen.
Learn more about speed here-
https://brainly.com/question/21561150
#SPJ4
the vibrations of a transverse wave move in a direction a. along the direction of wave travel. b. at right angles to the direction of wave travel. c. that changes with speed. d. opposite to the velocity.
Correct answer is b. at right angles to the direction of wave travel
The vibrations of a transverse wave move in a direction "at right angles to the direction of wave travel." The correct option is B.
What is a transverse wave?A transverse wave is a type of wave where the particles of the medium vibrate perpendicular to the direction of wave propagation. In other words, the motion of the medium is at right angles to the direction in which the wave moves. The term "transverse" is derived from the Latin word "transversus", which means "across".
Examples of transverse waves include light waves, electromagnetic waves, and seismic S-waves. In a transverse wave, the displacement of particles in the medium is perpendicular to the direction of the wave. This type of wave can be described by its amplitude, wavelength, frequency, and speed.
The amplitude of a transverse wave is the maximum displacement of the particles from their equilibrium position. The wavelength is the distance between two successive points in the medium that are in phase with each other. The frequency is the number of waves that pass a given point in the medium per unit time. The speed of a transverse wave is determined by the properties of the medium, such as its density and elasticity.
One interesting property of transverse waves is that they can undergo polarization, which is the process of filtering out waves that vibrate in a certain direction. This is commonly used in polarized sunglasses to reduce glare from reflective surfaces.
Therefore, transverse waves are a type of wave where the particles of the medium vibrate perpendicular to the direction of wave propagation. They are characterized by their amplitude, wavelength, frequency, and speed, and can undergo polarization. Transverse waves have important applications in fields such as optics, communication, and seismology.
To learn about the relationship between wave energy and amplitude click:
https://brainly.com/question/17003906
#SPJ2
the threads of a screw used to fasten two pieces of wood are pitched at an angle. how does this increase the static friction force?
In a case whereby the threads of a screw used to fasten two pieces of wood are pitched at an angle this will increase the static friction forceD By decreasing the coefficient of static friction between the screw and the wood.
How can this be explained?It should be noted that the greater the thread angle, the greater the angle between the load vector as well as the surface normal, hence the the normal force between the threads required to support a given load will be larger.
It should be nopted that the here will be increase in the thread angle as well as the friction and wear of a screw.
Therefore, option D is correct.
Learn more about static friction at:
https://brainly.com/question/29483655
#SPJ1
misssing options:
A By decreasing the surface area between the screw surface and the wood
B By increasing the ease of inserting the screw into the wood
C By increasing the normal force exerted by the wood on the screw thread
D By decreasing the coefficient of static friction between the screw and the wood
Find the slope in the x-direction at the point P(0,2,f(0,2)) on thegraph of f when f(x,y)=2(2x+y)e-xy
-4 is the slope in the x-direction at the point (0,2) on the given graph.
what is Slope of a given curve?A curve's slope at a given point is the same as the slope of the straight line that is perpendicular to the curve there.
To find the slope along x direction is given by:
slope along x-direction= δ(f(x))/δ(x)
=> δ([tex]2(2x+y)e^-^x^y[/tex])/δ(x)
=> 4[tex]e^-^x^y[/tex] - [tex]2y(2x+y)e^-^x^y[/tex]
we have to find the value of slope at point (0,2)
so the value of x=0 and y=2 in the above equation we get:
=> 4 [tex]e^2^*^0 -2*2(2*0+2)*e^2^*^0[/tex]
=> 4 - 4( 0 +2) *1
=>4-8
=>-4
so the slope along x-axis at point (0,2) is -4.
To know more about slope click on below link:
https://brainly.com/question/16941905#
#SPJ4
what is the difference between fresnel and fraunhofer diffraction? are they different physical processes? explain.
The Fraunhofer process is typically simpler to study even though they are physically the same processes and have distinct features. Fresnel diffraction, players who are near to one another, and non-parallel light rays
Participants in the Fraunhofer diffraction are far apart, and the light beams are parallel.
When plane waves are incident on a diffracting object and the diffraction pattern is observed far enough away from the object (a distance satisfying Fraunhofer condition) (in the far-field region), as well as when it is observed at the focal plane of an imaging lens, the Fraunhofer diffraction equation is used to model the diffraction of waves in optics. The Fresnel diffraction equation, on the other hand, predicts the diffraction pattern that is produced close to the diffracting object (in the near field area).
Although Joseph von Fraunhofer was not directly engaged in the formulation of the theory, the equation bears his name.
Learn more about Diffraction here:
https://brainly.com/question/12290582
#SPJ4