Determine the direction of the force on a charge.

a. along the line between the charge and the center of the square outward of the center
b. along the side of the square outward of the other charge that lies on the side
c. along the line between the charge and the center of the square toward the center
d. along the side of the square toward the other charge that lies on the side

Answer:

i beilieve that the answer is a transverse wave and a longitudinal wave

Explanation:

i dont really have an explanation

The two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.

Surface waves are generated from the point of the earthquake inside the earth. There are generally three types of waves are generated primary, secondary, and surface waves.

Now this surface wave is the slowest wave which reach to the surface of earth very slowly and is the most destructive wave.

The surface waves travel both in the vertical as the well horizontal direction along their direction of flow.

An example of surface waves is the car park in the parking that goes up down just like the waves in the oceans.

Thus the two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.

To know more about surface waves follow

https://brainly.com/question/16948312

Answer:

A

Explanation:

Answer:

c

Explanation:

it is c because I hade got it right

Answer:

Frictional Force

Explanation:

i think so

Answer:

0.706

Explanation:

Since the other astronaut measures a longer time, this is a time dilation problem. So, our equation for time dilation is given by

T = T₀/√(1 - β²) where T = period on passing space ship = 31.87 s, T₀ = period on other space vehicle = proper time = 22.58 s and β = relative velocity of between the two observers.

T = T₀/√(1 - β²)

√(1 - β²) = T₀/T

squaring both sides, we have

[√(1 - β²)]² = (T₀/T)²

1 - β² = (T₀/T)²

β² = 1 - (T₀/T)²

taking square root of both sides, we have

√β² = √[1 - (T₀/T)²]

β = √[1 - (T₀/T)²]

substituting the values of the variables into the equation, we have

β = √[1 - (22.58 s/31.87 s)²]

β = √[1 - (0.7085)²]

β = √[1 - 0.502]

β = √0.498

β = 0.706

Answer:

a body which was thrown in space ,moves under the influence of gravity only is defined as projectile.

Answer:

hope it is you

Answer:

K.E. = ½ × mv²

= ½ × 6 × (2)²

= ½ × 6 × 4

= 3 × 4

= 12 J

Answer:

Because the earth's axis is tilted. ... It is all about the tilt of the Earth's axis. Many people believe that the temperature changes because the Earth is closer to the sun in summer and farther from the sun in winter. In fact, the Earth is farthest from the sun in July and is closest to the sun in January

Answer:

carbon dioxide plus water in the presence of energy from light, results in glucose plus oxygen

The process is like carbon dioxide plus water in the presence of sunlight result in glucose plus oxygen.

Photosynthesis is a process that plants and other organisms use to convert light energy into chemical energy that can then be released to fuel the organism's activities via cellular respiration.

Photosynthesis is important because it is the process by which plants convert carbon dioxide into oxygen using sunlight. Animals require oxygen to survive, and plants serve as nature's air filter, filtering out harmful carbon dioxide.

Photosynthesis is the conversion of light energy by phototrophs into chemical energy, which is then used to power cellular activities. Sugars, which are formed from water and carbon dioxide, are used to store chemical energy.

The process of photosynthesis includes:

[tex]6CO_2+6H_2O \frac{Sunlight}{chlorophyll} > C_6H_1_2O_6+6O_2[/tex]

Thus, this is the basic process of photosynthesis.

For more details regarding photosynthesis, visit:

https://brainly.com/question/1388366

#SPJ2

Answer:

Truck [tex]\dfrac{g}{10}[/tex]

Road [tex]-\dfrac{g}{10}[/tex]

Explanation:

[tex]a_1[/tex] = Acceleration of truck = [tex]-\dfrac{g}{2}[/tex]

[tex]\mu[/tex] = Coefficient of friction = [tex]\dfrac{2}{5}[/tex]

Frictional force is given by

[tex]f=-\mu mg\\\Rightarrow f=-\dfrac{2}{5}mg\\\Rightarrow ma_2=-\dfrac{2}{5}mg\\\Rightarrow a_2=-\dfrac{2}{5}g[/tex]

Net acceleration is given by

[tex]a=a_2-a_1\\\Rightarrow a=-\dfrac{2}{5}g+\dfrac{g}{2}\\\Rightarrow a=\dfrac{g}{10}[/tex]

The acceleration of the box relative to the truck is [tex]\dfrac{g}{10}[/tex] and [tex]-\dfrac{g}{10}[/tex] relative to the road.

Answer:

Soil fertility can be further improved by incorporating cover crops that add organic matter to the soil, which leads to improved soil structure and promotes a healthy, fertile soil; by using green manure or growing legumes to fix nitrogen from the air through the process of biological nitrogen fixation; by micro-dose ........

Answer:

Continuous cultivation of water intensive crops like sugarcane and rice has resulted in their water tables running low at 149 percent. Alternating crops with millet, which consumes less water and has a high nutritional value, can increase the soil fertility and balance nutrients present in it.Apr 19, 2019

Explanation:

pls mark me as a brainlist

hope my answer is helpful

Answer:

b

Explanation:

f1=-f2 that could be thank u

Answer:

a= 4.4×10 m/s^2

Explanation:

pressure P  = E/c

Where, E = 100 W/m^2 intensity of light

c= speed of light  = 3×10^8 m/s

P = 1000/ 3×10^8

P = 3.33×10^(-6) Pa

Force F = P×A

F = 3.33×10^{-6}×6.65×10(-29)

= 2.22×10^{-6}

acceleration a  = F/m = 2.22×10^{-6}/ 5.10×10^{-27}

a= 4.4×10 m/s^2

Answer:

1.35 A

Explanation:

Applying,

V = IR

I = V/R..................... Equation 1

I = Current, V = Voltage, R = Resistance.

But,

R = Lρ/A............... Equation 2

Where L = Length of the wire, ρ = resistivity, A = Cross-sectional area of the wire.

Sustitute equation 2 into equation 1

V = AV/Lρ............... Equation 3

From the question,

Given: V = 0.7 V, A = 0.290 mm² = 2.9×10⁻⁷ m², L = 1.5 m, ρ = 10×10⁻⁸ Ω.m

Substitute these values into equation 3

I = (0.7× 2.9×10⁻⁷)/(1.5× 10×10⁻⁸ )

I = (2.03×10⁻⁷)/(15×10⁻⁸)

I = 1.35 A

Answer:

what the heck is sakurfa

Explanation:

[tex]V_{f2} =0.29 \dfrac{m}{s}[/tex] :Speed of the block immediately after the collision.

From elastic collision theory.

Momentum of a body is given as

[tex]P=m\times v[/tex]

where

p:Linear momentum

m: mass

v:velocity

There are 3 cases of collisions : elastic, inelastic and plastic.

For elastic collision the change in momentum remains constant

[tex]P_{i} =P_{f}[/tex]

Nomenclature and data

m₁: ball mass= 5.21 g= 5.21*10⁻³kg

V₀₁: initial ball speed,  =412 m/s

[tex]V_{f1}[/tex]: final ball speed

m₂: block mass =  14.8 kg  

V₀₂: initial block speed, = 0

[tex]V_{f2}[/tex]: final block speed

We apply furmula

[tex]P_{i} =P_{f}[/tex]

m₁[tex]\times[/tex]V₀₁+m₂[tex]\times[/tex]V₀₂=m₁[tex]\times[/tex]Vf₁+m₂[tex]\times[/tex]Vf₂

5.21[tex]\times[/tex]10⁻³[tex]\times[/tex]412+14.8[tex]\times[/tex]0= 5.21[tex]\times[/tex]10⁻³[tex]\times[/tex]Vf₁+14.8[tex]\times[/tex]Vf₂

2.15= 5.21*10⁻³[tex]\times[/tex]Vf₁+14.8[tex]\times[/tex]Vf₂ Equation (1)

For perfectly elastic collision the coefficient of elastic restitution (e) is equal to 1, and e is defined like this:

[tex]e=\dfrac{v_{f2-V_{f1} } }{v_{01-V_{ 02} } }[/tex]

1*(V₀₁-V₀₂) =Vf₂-Vf₁  , V₀₂=0, V₀₁ =412 m/s

412=Vf₂-Vf₁

Vf₁=Vf₂-412 Equation (2)

We replace Equation (2) in Equation (1)

2.15= 5.21[tex]\times[/tex]10⁻³(Vf₂-412)+14.8[tex]\times[/tex]Vf₂

2.15= 5.21[tex]\times[/tex]10⁻³*Vf₂-2.15+14.8*Vf₂

4.3=14.805Vf₂

[tex]Vf_{2} =\dfrac{4.3}{14.805} =0.29 \dfrac{m}{s}[/tex]: (+) ,with equal direction  of the movement of the ball before the collision.

Hence    [tex]V_{f2} =0.29 \dfrac{m}{s}[/tex]   Speed of the block immediately after the collision.

To know more about collisions follow

https://brainly.com/question/7694106

Answer:

I think it's C. Long root systems to reach water deep underground.

Answer:

C

stilt roots provide extra support

: In general, metals feel colder or hotter to the touch than other materials at the same temperature because they're good thermal conductors. This means they easily transfer heat to colder objects or absorb heat from warmer objects

It is because the metal conducted heat faster than it feels colder than the wood, which conducted heat slower. Even tho they are similar temperatures. The metal will feel colder than the wood because of the thermal conductivity of the metal, compared to the wood.  

Answer:

The correct answer is "0.66 kg.m²".

Explanation:

The given values are:

K.E = 500 J

w₁ = 65 rad/s

w₂ = 52 rad/s

As we know,

⇒  [tex]K.E=\frac{1}{2}I[w_1^2-w_2^2][/tex]

then,

⇒  [tex]I=\frac{2(K.E)}{w_1^2-w_2^2}[/tex]

On putting the given values, we get

⇒     [tex]=\frac{2\times 500}{(65)^2-(52)^2}[/tex]

⇒     [tex]=\frac{1000}{4225-2704}[/tex]

⇒     [tex]=\frac{1000}{1521}[/tex]

⇒     [tex]=0.66 \ kg.m^2[/tex]

Answer: 0

Explanation: Acellus

The charge q2 is kept in between the  charges q1 and q3. The net force on charge q2 is zero.

The force is the action of push or pull in order to move or stop the object.

Given, q1 = -1.60 x 10⁻¹⁹ C, q2 = +1.60 x 10⁻¹⁹ C, and q3 = -1.60 x 10⁻¹⁹ C. Particles q1 ,q2 and q2 , q3 are separated by d =0.001 m.

Net electrostatic force on q2 will be

F12 =F23

k q1 q2 / d² = kq2 q3 /d²

q1 q2 = q2 q3

Substitute the values of forces, we get

1.60 x 10⁻¹⁹ x 1.60 x 10⁻¹⁹  =  1.60 x 10⁻¹⁹ x 1.60 x 10⁻¹⁹  

1 =1

The net force F12 - F23 =0

Thus, the net force on q2 is zero.

Learn more about forces.

https://brainly.com/question/13191643

#SPJ2

Answer:

convex lens:converging lens

focal length:positive

magnification; positive

concave lens:diverging lend

focal length:negative

magnification :negative

types:concavoconcave,planoconcave

A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. A lens is a transparent material (either curved or flat surface) based on the principles of refraction. Concave lenses and convex lenses are often used together which is known as the Concave – Convex lens. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses. Cameras, telescopes and microscopes use different lens, helping us to see the world in a better

Read it and make it as table.

Answer:D.

Explanation:

Answer:

statement 1 is correct

2 not sure

Explanation:

Answer:

80m/s2

Explanation:

a = v-u/ t

=>a = 0- 400/ 5

= -400/5

= -80m/s2

v- sign is negligible

Answer:

Yes, I agree with rich

Explanation:

Yes I agree with rich.

Thus is because;

The electromagnetic process is what will determine how electromagnetic radiation will be emitted. Now, the mode of travel of electromagnetic energy is in the form of waves and then the wavelength of these waves is what will enable us know the form of energy. This includes light, x-rays, gamma rays e.t.c. This means that light and the others are just parts of the spectrum emitted and are called photons.

Thus, light can be said to be electromagnetic radiation.

I can agree with Rich that light is the same as electromagnetic radiation since the two terms can conveniently be used interchangeably.

Light has become a generic term that is used to describe all electromagnetic waves. All the waves in the electromagnetic spectrum have different frequencies and wavelengths but they are travel at the same speed which has been designated as "speed of light".

Therefore, i can agree with Rich that light is the same as electromagnetic radiation since the two terms can conveniently be used interchangeably.

Learn more: https://brainly.com/question/865531?

Answer:

[tex]4.12\times 10^{-5}\ J[/tex].

Explanation:

Given that,

Capacitance, [tex]C=1.4\times 10^{-7}\ F[/tex]

Charge stored in the capacitor, [tex]Q=3.4\times 10^{-6}\ C[/tex]

We need to find the electric potential energy stored in the capacitor. The formula for the electric potential energy stored in the capacitor is given by :

[tex]E=\dfrac{Q^2}{2C}[/tex]

Put all the values,

[tex]E=\dfrac{(3.4\times 10^{-6})^2}{2\times 1.4\times 10^{-7}}\\\\=4.12\times 10^{-5}\ J[/tex]

So, the required electric potential eenergy is equal to [tex]4.12\times 10^{-5}\ J[/tex].

Answer:

These linear thermal expansion coefficients are room temperature values of metals. Linear thermal expansion coefficient is defined as material's fractional change in length divided by the change in temperature.

Explanation:

The change in temperature caused is 0.0000207 K.

To calculate the change in temperature we use the formula of linear expansivity below.

⇒ Formula:

⇒ Where:

⇒ Make ΔT the subject of the equation

From the question,

⇒ Given:

⇒ Substitute these values into equation 2

Hence, the change in temperature caused is 0.0000207 K

Learn more about linear expansivity: https://brainly.com/question/14325928

Answer:

kindness

Explanation:

This is my alt account just grinding points