Answer:
Following are the explanation of the Rube Goldberg device:
Explanation:
According to the Rube Goldberg devices, which conform with "the energy conservation law," choose a chain of events to carry out such a basic task differently, for this unit, a range of instant theatrical resources are converted into possible energy. It is also responsive to an energy conservation law.
It is the unit that produces theatrical power when quartz falls off from the roof. Instead, its marble hits or falls into a plastic bottle, its velocity converted into potential energy which lifts its soda bottle. Its next marble, when the stone came in contact with it, can pass angular momentum to some other marble. Its gravitational force of quartz drops. It has been built into kinetic energy, distributed only to Nando. All energy of every domino becomes passed to another in a domino effect before the last one takes its contraption off because as the mousetrap gets off, all of the stored potential energy is released and the cutters were also removed. Its sequence which binds its puck is cut, which also frees the ballon as well as stores its electricity.Can someone please help me with these questions!!!!!!
Answer:
1. A. 10°C
2. A. Boiling point
3. A. Less than liquids.
Explanation:
Eric's father asked an engineer to survey the field behind their house. He wanted to plant some apple and pear trees there. According to the survey, the field is 38 meters (m) long and 17 meters (m) wide. What is the perimeter of the field in centimeters?
Answer:
P=110 m
Explanation:
Length of the field is 38 m
Breadth of the field is 17 m
We need to find the perimeter of this field. It is in the form of a rectangle. The perimeter of a rectangle is given by :
P=2(l+b)
P=2(38+17)
P=110 m
So, the perimeter of this field is 110 m.
A car drives on a road at a constant speed of 50 miles/hour.
The forward force of the car is ________________
the opposing friction and air
resistance forces.
The forward force of the car and the opposing friction and air resistance forces are ____________
( !!
Answer:
It will take the police car 3.5 hours to travel a distance of 175 miles traveling at a rate of 50 miles/hour.
Explanation:
For the following, identify the most likely value for x.a. BHx b. CHx c. NHx d. CH2Clx
Given :
a. [tex]BH_x[/tex] b. [tex]CH_x[/tex] c. [tex]NH_x[/tex] d. [tex]CH_2Cl_x[/tex] .
To Find :
Find the most likely vale of x for each one .
Solution :
a . [tex]BH_x[/tex]
Because boron have valency of 3 .
So , x = 3 .
b . [tex]CH_x[/tex]
Valency of carbon is 4 .
x = 4 .
c . [tex]NH_x[/tex]
Valency of nitrogen is 3 .
Therefore , x = 3 .
d . [tex]CH_2Cl_x[/tex]
Now ,we know valency of carbon is 4 and hydrogen is 1 .
Also , two hydrogen are already there .
So , only 2 electrons left to share .
Since , chlorine have valency of 1 .
Therefore , only 2 electrons of chlorine can connect .
x = 2 .
Hence , this is the required solution .
I need help ASAP!! Plzz
Answer:
0.1
tenth
hundredth (0.01)
1.05 (can be anywhere from 1.00 to 1.10)
11.42 (can be anywhere from 11.40 to 11.50)
yes, it falls within reasonable doubt
Monobromination of toluene gives a mixture of three bromotoluene products. Draw and name them.
Answer:
o-bromotoluene, m-bromotoluene and p-bromotoluene.
Explanation:
Hello,
In this case, on the attached picture you will find the reaction which yields o-bromotoluene as the first product, m-bromotoluene as the second product and p-bromotoluene as the last one since the substitution could be done at the second (ortho), third (meta) or fourth (para) carbons on the toluene.
Regards.
Which atom is most likely to form a metallic bond?
aluminum (Al)
helium (He)
phosphorus (P)
carbon (C)
Answer:
I would say it's A just because it's make no sense for the other answers.
Aluminum atom is most likely to form a metallic bond.
METALLIC BONDS:
Metallic bonds are the kind of bonds that forms between metallic atoms. Electrons are shared between the positive ions called cations. These electrons are called localized electrons. Metallic bonds are responsible for the properties possessed by metals such as conductivity, lustre etc. Since metallic bonds forms between metal atoms, it is most likely to form between aluminum atom.Learn more: https://brainly.com/question/20511339?referrer=searchResults
If you know the force applied to an object and measure its acceleration, which equation would you use to calculate the object’s mass? m = Fa m = a F m = a/F m = F/a
Answer: m=F/a
Explanation:
Answer:
d
Explanation:
hey can anyone help me with organic chemestry?
How is it possible for water to be polar but uncharged?
What is the density of a silver coin from the following data:
Mass of silver coin 6.581 g
Volume of coin and water 23.7 mL
Volume of water alone 23.1 mL
The answer is assumed to be in g/mL. Please type a numeric value only.
Answer:
you can use math wa, it helps
Draw structures for compounds that meet the following descriptions in proton NMR:a) C2H6O; one singletb) C3H7Cl; one doublet and one septetc) C4H8Cl2O; two tripletsd) C4H8O2; one singlet, one triplet, and one quartet
Answer:
The structures are shown in the attachments.
Explanation:
Please see the attachments below for the structures.
Explanation:
For the structure in (a)There is only one environment denoted as 'a'.
Using the (n+1) rule to determine the multiplicity, m
where is the number of neighboring Hydrogen, then
Since, n = 0, then
m = 0 + 1 = 1 (which means singlet)
Hence, one singlet
For the structure in (b)There are two environments denoted as 'a' and 'b'
For 'a' ; n = 6
Hence, m = n + 1
m = 6 + 1 = 7 (this means septet)
For 'b'; n = 1
then, m = n + 1
m = 1 + 1 = 2 (this means doublet)
Hence, one septet, one doublet
For the structure in (c)There are two environments denoted as 'a' and 'b'
For 'a' ; n = 2
then, m = n + 1
m = 2 + 1 = 3 (this means triplet)
For 'b' ; n = 2
then, m = n + 1
m = 2 + 1 = 3 (this means triplet)
Hence, two triplets
For the structure in (d)There are three environments denoted as 'a', 'b', and 'c'
For 'a' ; n = 0
Hence, m = n + 1
m = 0 + 1 = 1 (this means singlet)
For 'b' ; n = 3
then, m = n + 1
m = 3 + 1 = 4 (this means quartet)
For 'c' ; n = 2
then, m = n + 1
m = 2 + 1 = 3 (this means triplet)
Hence, one singlet, one triplet, and one quartet
The solubility of oxygen in water A. allows for a greater concentration of O2 in water than in air. B. is responsible for thermoclines. C. is greater in cool liquid water than in warm liquid water. D. isn't significantly dependent on temperature
The ans should be C. ( if i'm not wrong )
This is because the solubility of oxygen increases when temperature in the water is cooler. Cold water can hold more dissolved oxygen than warm water, thus having a higher concentration of oxygen.
Answer:
C. is greater in cool liquid water than in warm liquid water.
Explanation:
How many different elements occur naturally?
Answer:
94 are naturally made on earth
Explanation:
Answer:
94 or 98, i think.
Explanation:
Enter a balanced equation for the reaction between aqueous lead (II) nitrite and aqueous lithium chloride to form solid lead (II) chloride and aqueous lithium nitrite.
Answer:
Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + 2 LiNO₂(aq)
Explanation:
Let's consider the reaction between aqueous lead (II) nitrite and aqueous lithium chloride to form solid lead (II) chloride and aqueous lithium nitrite.
Pb(NO₂)₂(aq) + LiCl(aq) ⇒ PbCl₂(s) + LiNO₂(aq)
This is a double displacement reaction. We will start balancing Cl by multiplying LiCl by 2.
Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + LiNO₂(aq)
Now, we have to balance Li by multiplying LiNO₂ by 2.
Pb(NO₂)₂(aq) + 2 LiCl(aq) ⇒ PbCl₂(s) + 2 LiNO₂(aq)
The equation is now balanced.
The balanced chemical reaction equation required is; Pb(NO2)2(aq) + 2 LiCl(aq) -----> PbCl2(s) + 2LiNO2(aq)
In order to write a balanced chemical reaction equation, we must write down the symbols of the compounds involved as follows;
lead (II) nitrite - Pb(NO2)2
lithium chloride - LiCl
lead (II) chloride - PbCl2
lithium nitrite - LiNO2
Recall that the principle of writing a balanced chemical reaction equation is that the number of atoms of each element on both sides of the reaction equation must be the same. The required balanced chemical reaction equation is;
Pb(NO2)2(aq) + 2 LiCl(aq) -----> PbCl2(s) + 2LiNO2(aq)
Learn more: https://brainly.com/question/2320755
To prepare 100.0 mL of a 0.0525 M solution of NaCl in water, what mass of sodium chloride is needed? The
molar mass of NaCl is 58.44 g/mol.
Answer:
0.307 g
Explanation:
Step 1: Given data
Volume of solution: 100.0 mL
Molarity of the NaCl solution: 0.0525 M
Molar mass of NaCl: 58.44 g/mol
Step 2: Calculate the moles of NaCl required
The molarity is equal to the moles of solute (NaCl) divided by the liters of solution.
M = moles of NaCl / liters of solution
moles of NaCl = M × liters of solution
moles of NaCl = 0.0525 mol/L × 0.1000 L = 5.25 × 10⁻³ mol
Step 3: Calculate the mass corresponding to 5.25 × 10⁻³ moles of NaCl
5.25 × 10⁻³ mol × 58.44 g/mol = 0.307 g
the weight of a sack potato in india is 50kgf. will the weight increase or decrease in bhutan. why
Answer:
Assume that the sack was initially close to the sea level. Its weight will increase even though its mass stays the same.
Explanation:
The weight of an object typically refers to the size of the planet's gravitational attraction (a force) on this object. That's not the same as the mass of the object. The weight of an object at a position depends on the size of the gravitational field there; on the other hand, the mass of the object is supposed to be same regardless of the location- as long as the object stays intact.
Let [tex]g[/tex] denote the strength of the gravitational field at a certain point. If the mass of an object is [tex]m[/tex], its weight at that point will be [tex]m \cdot g[/tex].
Indeed, [tex]g \approx 9.81\; \rm N \cdot kg^{-1}[/tex] on many places of the earth. However, this value is accurate only near the sea level. The equation for universal gravitation is a more general way for finding the strength of the gravitational field at an arbitrary height. Let [tex]G[/tex] denote the constant of universal gravitation, and let [tex]M[/tex] denote the mass of the earth. At a distance [tex]r[/tex] from the center of the earth (where
[tex]\displaystyle g \approx \frac{G \cdot M}{r^2}[/tex].
The elevation of many places in Bhutan are significantly higher than that of many places in India. Therefore, a sack of potato in Bhutan will likely be further away from the center of the earth (larger [tex]r[/tex]) compared to a sack of potato in India.
Note, that in the approximation, the value of [tex]g[/tex] is (approximately, because the earth isn't perfectly spherical) inversely proportional to the distance from the center of the planet. The gravitational field strength
On the other hand, the weight of an object of fixed mass is proportional to the gravitational field strength. Therefore, the same bag of potatoes will have a smaller weight at most places in Bhutan compared to most places in India.
The [H+] of a solution can be determined from the pH using the equation: [H+] = 10 - pH ... Where: [H+] = hydrogen ion concentration. Note: Write [H+] as [H+]. Capitalization counts. Use the rules for logarithms and exponents to solve for pH in terms of [H+].
Answer:
pH = -log₁₀ [H⁺]
Explanation:
pH is a value in chemistry used in to measure solution trying to determine each quality, purity, risks for health of some products, etc.
As you write in the question, [H⁺] = 10^(-pH)
Using logarithm law (log (m^(p) = p log(m):
log₁₀ [H⁺] = -pH
And
pH = -log₁₀ [H⁺]Answer:
7 (a neutral solution)
Answer: 10-7= 0.0000001 moles per liter
5.6 (unpolluted rainwater)
Answer: 10-5.6 = 0.0000025 moles per liter
3.7 (first acid rain sample in North America)
Answer: 10-3.7 = 0.00020 moles per liter
The concentration of H+ in the Hubbard Brook sample is 0.00020/0.0000025, which is 80 times higher than the H+ concentration in unpolluted rainwater.
Explanation:
plato
Classify each substance based on the intermolecular forces present in that substance.A. H2OB. CH4C. CO D. CH3Cl1. Hydrogen bonding, dipole dipole, and dispersion2. Dipole dipole and dispersion only 3. Dispersion only
Answer:
H2O - Hydrogen bonding, dipole dipole, and dispersion
CH4 - Dispersion only
CO - Dipole dipole and dispersion only
CH3Cl - Dipole dipole and dispersion only
Explanation:
Hydrogen bonding can only exist when hydrogen is bonded to a small highly electronegative atom such as oxygen hence hydrogen bonds, dipole interactions and dispersion by are present in water.
CH4 is a nonpolar molecule hence only dispersion forces are present.
CH3Cl and CO both possess dipoles in the molecule hence both dipole interactions and dispersion forces exist in the molecule.
Suppose now that you wanted to determine the density of a small crystal to confirm that it is graphite. From the literature, you know that graphite has a density of 2.25 g/cm^3. How would you prepare 20.0 mL of the liquid mixture having that density from pure samples of CHCl3 (d = 1.492 g/mL) and CHBr3 (d = 2.890 g/mL)? (Note: 1 mL = 1 cm^3.)
Answer:
The volume of first and second compound are 9.15 ml and 10.85 ml.
Explanation:
Given that,
Density of graphite = 2.25 g/cm³
Volume of mixture = 20.0 mL
Density of first compound = 1.492 g/ml
Density of second compound = 2.890 g/ml
Let the volume of first mixture = x
The volume of second mixture = (20-x)....(I)
We need to calculate the volume of first compound
Using formula of density of mixture
[tex]\rho=\dfrac{V_{1}\rho_{1}+V_{2}\rho_{2}}{V_{1}+V_{2}}[/tex]
Where, [tex]V_{1}[/tex] = volume of first compound
[tex]V_{2}[/tex] = volume of second compound
[tex]\rho_{1}[/tex] =density of first compound
[tex]\rho_{1}[/tex] = density of first compound
Put the volume into the formula
[tex]2.25=\dfrac{x\times1.492+(20-x)\times2.890}{x+20-x}[/tex]
[tex]45=1.492x+57.8-2.890x[/tex]
[tex]45-57.8=1.492x-2.890x[/tex]
[tex]12.8=1.398x[/tex]
[tex]x=\dfrac{12.8}{1.398}[/tex]
[tex]x=9.15\ ml[/tex]
We need to calculate the volume of second compound
Using equation (I)
[tex]V_{2}=20-x[/tex]
Put the value of x
[tex]V_{2}=20-9.15[/tex]
[tex]V_{2}=10.85\ ml[/tex]
Hence, The volume of first and second compound are 9.15 ml and 10.85 ml.
Which statement is false? a) When reactants become products, they do so through an intermediate transition state. b) At equilibrium, equal amounts of products and reactants are present. c) Most biocatalysts are proteins. d) AG is a function of Keq
Answer:
b) At equilibrium, equal amounts of products and reactants are present.
Explanation:
At equilibrium , the ratio of product of concentration of products and product of concentration of reactants is constant .
A + B ⇄ C + D
[C] [ D] / [ A ] [ B ] = Constant
So, the statement ( b ) is false .
All other statements are true .
The diameter of an atom is approximately 1 * 10 ^ - 10 * m . What is the diameter in decimeters?
Answer:
[tex]d=1x10^{-9}dm[/tex]
Explanation:
Hello,
In this case, considering that 1 m equals 10 dm, the required diameter of the atom in decimetres is:
[tex]d=1x10^{-10}m*\frac{10dm}{1m} \\\\d=1x10^{-9}dm[/tex]
Best regards.
Which of the following pairs exhibit an ion-dipole interaction? a. CH_3OH and Na^+ b. Cl^- and K^+ c. CH_3CH_2CH_2CH_2CH_3 and CH_3CH_2CH_2CH_2COOH d. CH_3CH_2OH and H_2O
Answer:
a. CH_3OH and Na^+
Explanation:
Ion-dipole interaction is the forces of attraction existing between a polar compound and an ion. This particular type of ion-dipole attraction occurs between an electrostatic attraction of an ion and a dipole molecule.
From the given example, CH3OH is a polar compound, and Na^+ is an ion. Therefore, that is the only pair that exhibit the characteristics of an ion-dipole interaction.
which of these substances are most likely crystalline solids?
Answer:
diamond
sugar
rubber
salt (NaCl)
wood
ice
flour
Answer:
diamond
sugar
salt
ice
Explanation:
Calculate the mass in grams of 8.35 × 1022 molecules of CBr4.
Answer: 45.983 g CBr₄
Explanation:
To convert from moles to grams, you know that we will need molar mass and Avogadro's number.
Avogadro's number: 6.022×10²³ molecules/mol
Molar mass: 331.627 grams/mol
Now that we have what we need, you can use these to solve for grams. [tex]8.35*10^2^2molecules CBr_{4} *\frac{1mol}{6.022*10^2^3molecules} *\frac{331.627 g}{1 mol} =45.983 g[/tex]
Our final answer is 45.983 g CBr₄.
How would replacing many amino groups with carboxyl groups change the properties of the compound?
Answer:
This replacements will make the compound less basic and more acidic
Explanation:
Replacing amino groups (-NH₂) which act as bases [because of there ability to accept hydrogen ion (H⁺)] with carboxyl group (-COOH) which acts as acid [because of it's ability to donate hydrogen ion (H⁺)] in a compound changes the property of the compound to be less basic and more acidic.
Can someone please help me w these chemistry conversion? 1. The density of Mercury is 13.6 g/mL. What is the volume of mercury, in quarts has a mass of 95.0 ounces? 2. Tetrachloroethylene, also called PERC, has a density of 1.62 g/mL. It was formerly used as a dry cleaning solvent. What is the mass in pounds of PERC contained in a 55.0 gallon drum? 3. Osmium is the most dense element having a density of 22.5 g/cm^3 Calculate the density of osmium in kg/m^3. 4. The density of Iron is 7.50 g/cm^3. What is the mass, in pounds, of a cube of iron that measures 5.00 cm on a side? 5. Lead has a density of 10.5 g/cm^3. What is the diameter of a lead ball that has a mass of 500.0 g? Report answer in cm.
Answer:
1. 0.209quart
2. 743.6pounds
3. 22500kg/m^3
4. 2.07pounds
5. 4.50cm
Explanation:
Note that, these questions are related to density which can be calculated using the formula:
Density (p) = Mass (m) / Volume (v)
However, the units are different for each questions, hence, must be made the same
1. 1 ounce = 28.35 grams
95 ounces will be 95 × 28.35 = 2693.2g
Volume = mass/density
Volume of Mercury= 2693.2/13.6
Volume= 198ml
1 ml = 0.00106quart
198ml = 198 × 0.00106 = 0.209quart
2. 1 gallon = 3785.4ml
55 gallons = 55× 3785.4 = 208197ml
Mass = density × volume
Mass = 1.62 × 208197
Mass = 337,279.14g
1 pounds = 453.592 g
337279.14 g = 337279.14/453.592
Mass = 743.6pounds
3. 1g/cm^3 = 1000kg/m^3
Hence, a density of 22.5g/cm^3 will be 22.5 × 1000 = 22500kg/m^3
4. Volume of a cube of side 5cm each will be 5×5×5 = 125cm^3
Density = 7.50g/cm^3
Mass = Density×volume
Mass in grams = 7.50 × 125
Mass = 937.5grams
1 pound = 453.592 g
Therefore, 937.5g will be 937.5/453.592 = 2.07pounds.
5. Volume = Mass / density
Volume = 500/10.5
Volume = 47.62cm^3
Since a ball is spherical in shape, volume of a sphere (V) = 4/3πr^3
To find radius, we say;
47.62 = 1.33 × 3.142 × r^3
47.62 = 4.179 × r^3
r^3 = 47.62/4.179
r^3 = 11.395
r = 3√11.395
r = 2.25cm
To get diameter (d), we multiply the radius (r) by 2,
d = 2 × 2.25
d= 4.50cm
You are comparing a reaction that produces a chemical
change and one that produces a physical change. What
evidence could you use to determine which type of
change is occurring?
If the reaction is a chemical change, new substances with different properties and identities are formed. This may be indicated by the production of an odor, a change in color or energy, or the formation of a solid.
convert 6.8 × 10^2 to standard notation.
Answer:
680
Explanation:
Move the decimal 2 to the right.
When a number is written using only the digits of the number, that is considered standard notation. 6.8 × 10² is converted into standard notation by shifting two decimal to the right side, then it became 680.
What is standard notation ?A form of writing a certain number, an equation, or an expression in a way that adheres to set norms is known as a standard notation. For instance, 4,500,000,000 years is how 4.5 billion years is written.
When a number is written using only the digits of the number, that is considered standard notation. Since words are not used in conventional number notation, this is the way that numbers are typically written.
The stages to writing a number in its standard form are as follows: Write the first digit of the supplied number in step one. Step 2: After the first number, add the decimal point. Step 3: Next, count how many digits there are in the supplied number after the first one and express that number as a power of 10.
Thus, the standard notation is 680.
To learn more about standard notation, follow the link;
https://brainly.com/question/10253124
#SPJ2
Choose all the answers that apply.
Which of the following statements are true?
Ethical scientists make unbiased conclusions.
A dishonest scientst has a lot of integrity.
Confirmation bias is the most common type of bias in science.
Science is based on opinion and subjective evidence.
Bias can be ruled out when similar results are obtained from repeated experiments.
Explanation:
A dishonest scientst has a lot of integrity.
Confirmation bias is the most common type of bias in science.
Answer: ethical scientists make unbiased conclusions, science is based on opinion and subjective evidence, and bias can be ruled out if similar results are obtained from repeated experiments.
Explanation: If you’re a dishonest scientist you don’t have integrity and confirmation bias isn’t the most common type of bias in science