decussation results in the right side of the brain interpreting sensory information from the left side of the body. true or false

Answers

Answer 1

True ,decussation results in the right side of the brain interpreting sensory information from the left side of the body.

Decussation means that a lesion interrupting the fibers above the crossing will have an effect on the side of the body . Decussation refers to the point at which the fibers cross the midline.

Sensory decussation is a decussation or crossover of axons from the gracile nucleus and cuneate nucleus, which are responsible for fine touch, vibration, and  two-point discrimination of the body. Pyramidal decussation occurs in the lower medulla. The lower limit of the pyramids occurs when the fibers cross or decussate.

To learn more about Decussation , here

brainly.com/question/12897263

#SPJ4


Related Questions

Proper segregation of plasmids into daughter cells may incorporate which of the following strategies? o Random partitioning due to high copy number
o Polymerization of a filament that binds to, and physically separates plasmids
o Post-segregational killing via toxin / antitoxin system

Answers

Random partitioning due to high copy number, Polymerization of a filament that binds to, and physically separates plasmids and Post-segregational killing via toxin/antitoxin system are the ways incorporated to Properly segregate the plasmids into daughter cells.

Plasmids not only replicate, copying across to a daughter cell when a bacterium divides, but they can also pass between unrelated bacteria via mechanisms such as cell-to-cell contact or a 'bridging connection' in a process known as 'conjugation,' which has been described as the bacterial equivalent of sex.

Plasmid purification consists of three basic steps: bacterial culture growth, bacterial harvesting and lysis, and plasmid DNA purification. Low-copy number plasmids require a segregation mechanism to ensure that one-half of the plasmid copies are distributed to each daughter cell during cell division. This can be accomplished directly by partitioning plasmid copies via a mechanism similar to eukaryotic mitosis.

To learn more about Plasmids, here

https://brainly.com/question/15461017

#SPJ4

Which of the following best describes the genetic material a person receives from each parent?

Answers

I'm pretty sure an x or y chromosome

Why is photosynthesis and cellular respiration considered a cycle?

Answers

Answer:

Cellular respiration and photosynthesis are considered a cycle because the product (end material) of one reaction serves as the starting material for the other reaction

Explanation:

The starting material for cellular respiration is sugar and water and the products are carbon dioxide and water. Water and carbon dioxide are starting material for photosynthesis.

Please give me Brainly.

All the best.

Sky(✿◡‿◡)

when a skeletal muscle fatigues, what happens to the contractile force over time?

Answers

When a skeletal muscle fatigues the contractile force declines due to previous contractile activity. Once the muscle has reached maximum tetanic tension, there is no longer an increase in force generated by the muscle. At this stage, the muscle becomes fatigued and contractile force starts to decrease over time.

Due to earlier contractile activity, skeletal muscle weariness results in a decrease in contractile force. The muscle no longer produces an increase in force after it has stretched to its maximal tetanic tension. At this point, the muscle starts to ache and its contractile force starts to gradually decline. A sign of this kind is muscular weariness, which over time reduces the muscles' capacity for work. Sleepiness is only one symptom of fatigue. It may be difficult to get out of bed in the morning due to fatigue. Additionally, it makes it difficult for someone to do everyday duties. Physical exhaustion and mental fatigue are the two main categories of fatigue.

To know more about skeletal muscle visit:
https://brainly.com/question/1560716
#SPJ4

Which of the following compounds can be classified as a proteins?

Answers

Where’s the picture?

perspective that our genes and environmental influences work together to determine our characteristics

Answers

Environmental factors often influence traits independently of genes. Either of these effects can change the proteins that are made from a gene, which in turn affects traits.

How do environment and gene determine our personality?

Some genes increase the characteristic and others work to decrease the same characteristic-complex relationship among the various genes, as well as a variety of random factors, produce the final outcome.

Because of their genetic makeup, individuals differ in their responsiveness to the qualities of the environment. There are unique, genetically influenced reactions to particular experiences to which we are exposed.

The presence of drugs and chemicals in an organism's environment can also influence gene expression in the organism. The environment can affect morphological and physiological development whereas genes influence morphology and physiology, creating a framework within which the environment acts to shape the behavior of an individual.

Hence in this way, genes and environmental influences work together to determine our characteristics.

Learn more about genetic influences from the link given below:

https://brainly.com/question/28218372?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ4

sustainable development must be considered during the developmental activities justify this statement​

Answers

Sustainable development has been defined as development that meets the needs of the present without compromising the ability of future generations to meet their own needs

Hope this helps:)

which statement characterizes commensalism?

a) both organisms are negatively affected.
b) one organism benefits while the other organism experiences harm.
c) one organism benefits while the other organism is not affected.

Answers

Answer:

c) one organism benefits while the other organism is not affected.

One organism benefits while the other organism is not affected

what is microbial antagonism?

Answers

Microbial antagonism is the competition between microbial organisms for food assets and territory. As a result, if one organism out competes the other, this leads to the inhibition of the organism that failed to thrive in the surroundings.

Microbial antagonists have an indirect advantageous effect on plant life due to the fact they lessen the pressure from soil borne pathogens on the crop vegetation. however there is also a brilliant quantity of microorganisms inside the soil, that have a right away high-quality impact on plant increase and health (Somers et al., 2004).

Microbial antagonism continues ordinary microbiota from colonizing a few parts of the human body. Microbial antagonism takes place whilst members of the regular microbiota prevent pathogens from colonizing and turning into mounted within the frame.

Antagonism, in ecology, an affiliation among organisms in which one benefits at the expense of the opposite. As existence has evolved, herbal choice has favoured organisms which can be capable of correctly extract electricity and nutrients from their surroundings.

Learn more about Microbial antagonism  here:

https://brainly.com/question/28149629

#SPJ4

What is the process in which an mrna molecule is used to synthesize a specific polypeptide on a ribosome?.

Answers

The process in which an m-RNA molecule is used to synthesize a specific polypeptide on a ribosome is called translation.

m-RNA stands for messenger RNA. It is the main coding enzyme that encodes the information from the DNA sequence to be translated to the protein. It is transcribed from the DNA with the help of enzyme RNA Polymerase II in eukaryotic cells.

Ribosome is a nucleoprotein. It is the main machinery for the synthesis of protein. The ribosome is composed of two subunits: a small subunit and  a large subunit. There are two types of ribosomes: 70 S type and 80 S type.

To know more about ribosome, here

brainly.com/question/241631

#SPJ4

one kind of plasmid in bacteria is called an r plasmid. what kinds of genes are typically present on such plasmids?

Answers

One type of bacterial plasmid is called an r-plasmid. Types of genes typically present in such plasmids Antibiotic resistance genes

Antibiotic resistance genes are often carried in plasmids or transposons and are transferred from cell to cell by conjugation, transformation, or transduction. This gene exchange allows rapid spread of resistance within bacterial populations and between different bacterial species. Some genetically modified plants contain genes that make the plant resistant to certain antibiotics. Scientists often then and can say that add these resistance genes during genetic modification. This allows GM plants and cells to be distinguished from non-GM plants and cells.

To know more about Antibiotic resistance genes visit:

https://brainly.com/question/29412753

#SPJ4

compared with cells that are surrounded by a lipid membrane, viruses . . . choose one:a. may be surrounded by a membrane synthesized by viral proteins.b. may be surrounded by a membrane derived from the host cell.c. are also always surrounded by a lipid membrane.d. are never surrounded by a lipid membrane.

Answers

Not even all viruses have an envelope-like membrane surrounding the capsid. Viruses do have a wall outside of the capsid, but it originates from the host.

What do viruses possess?

A virus's outer layer is formed of a nutrient coat that serves as the nucleus of its mitochondrial Genome, either RNA or Genetic material. The second spikey coat of the mailbox is occasionally seen around the virus. Viruses are able to attach to and enter new hosts.

How do viruses become made?

It's probable that mobile genetic elements that had the ability to move between cells gave rise to viruses. They might be related to organisms that were once free-living but later switched to a parasitic mode of reproduction. It's possible that viruses existed before cellular life developed and helped to shape it.

To know more about  viruses visit:

https://brainly.com/question/2401502

#SPJ4

What defines a substantial increase in a jellyfish population within a short time?.

Answers

As a result of a greater reproductive rate, a jellyfish bloom is described as a significant rise in a jellyfish bloom within a short period of time.

What drives the growth in the number of jellyfish?

Because jellyfish can survive with less oxygen than many other marine animals, the rise in their population has been linked to hotter waters and even increasing pollution.

What does it signify when there are many jellyfish present?

The recent period of sunny skies and southerly winds may have increased the amount of nutrients in the water, enhancing the conditions for jellyfish repopulation. One aspect that contributes to enormous jellyfish spawning like those is eutrophication, which is the scientific word for an overabundance of nutrients.

To know more about jellyfish bloom visit:-

https://brainly.com/question/11598697

#SPJ4

In an experiment, you test whether the number of times you rub a cloth against a balloon changes how long it will stick against the wall. You start by rubbing the balloon 10 times with the cloth and stick it to the wall. You repeat this three times and record your results in a table.


Observation
Number of Times Balloon is Rubbed by Cloth Trial #1 Trial #2 Trial #3
10 6 seconds 20 seconds 20 seconds


What statement best reflects why you should do repeated trials in an experiment?
Rubbing the balloon against a cloth 10 times produces very different results each time it is repeated.
The first trial is right because it is done with new materials that give the best results.
The second and third trials were wrong because they were very different from the first trial.
You would make a wrong conclusion if it were based on the first trial in the experiment.

Answers

The statement that best reflects why you should do repeated trials in an experiment is:

You would make a wrong conclusion if it were based on the first trial in the experiment; option D.

What are experiments?

Experiments are tests or procedures performed to test a given hypothesis or theory about a given observation.

In performing experiments, the procedure usually involves the repetition of steps in the reaction.

Repetition is necessary in order to remove bias in measurements and to lower sampling and random error.

The steps in conducting experiments include the following:

stating the research questionstating the aim of the experimenetmaterial and methodsresults ad discussionconclusion

Learn more about experiments at: https://brainly.com/question/25303029

#SPJ1

What happens when human DNA is inserted into a bacterial plasmid?

Answers

Answer:

creates a so-called recombinant plasmid

Researchers can insert DNA fragments or genes into a plasmid vector, creating a so-called recombinant plasmid. This plasmid can be introduced into a bacterium by way of a process called transformation. Then, because bacteria divide rapidly, they can be used as factories to copy DNA fragments in large quantities.

What is inserting a human gene into a bacterial plasmid?

Recombinant DNA is a technology scientist developed that made it possible to insert a human gene into the genetic material of a common bacterium.

What is it called when DNA is inserted into a plasmid?

In a typical cloning experiment, researchers first insert a piece of DNA, such as a gene, into a circular piece of DNA called a plasmid. This step uses restriction enzymes and DNA ligase and is called ligation.

Thus, by inserting human DNA into a bacterial plasmid, bacteria divide rapidly and they can be used as factories to copy DNA fragments.

To know more about recombinant DNA:

https://brainly.com/question/5996835

#SPJ4

Explain your understanding of a calorie, how energy is stored in the body and what factors make our individual energy requirements so unique. A portion of our consumed energy goes towards physical activity each day. Share some of the daily activities you perform that you think would require this energy.

Answers

Calorie, a unit of energy, is the amount of energy expelled when the body breaks down food, it is stored in the body as glycogen or fat and gender, body weight, and age make individual energy requirements unique.

Some daily activities that require physical energy are Riding a bicycle, walking fast, hiking, skating. dancing, workouts.

How are calories burned?

Calories are energy people get from foods and drink they consume. Apart from basic metabolism, the way the body uses food determines how much calories the body burns.

The body stores this energy as glycogen or fat. Body weight, age and gender are determinants of the body's use of energy. Energy requiring activities include workouts, dancing, hiking etc., to burn calories.

Learn more on calories here: https://brainly.com/question/11460467

#SPJ1

A life cycle in which the only multicellular form is haploid is most typical of __________.

Answers

A life cycle in which the only multicellular form is haploid is most typical of fungi.

In the lifecycle process of fungi, the haploid stage of lifecycle is known to be multicellular and it is te dominant stage.

As a result of the haploid multicellular stage, specialized cells that are also haploid are made.

The process through which these haploid cells will be made is mitosis as for meiosis sexual process has to take place.

After mitosis, the specialized haploid cells that were produced are fused so that a diploid zygote can be formed which will grow into a new fungus.

To learn more about fungi, click here:

https://brainly.com/question/13050764

#SPJ4

A parallel circuit ha a 12V power pack. It ha 2 branche each with a light bulb on. What i the potential difference of each of the light bulb?

Answers

The potential difference between each of the light bulbs will be 6.

According to ohms law,

V=IR

V=12v

R=2 (2 branches draw current so they serve as resistance)

I=V/R

=12/2

=6 A

This current will serve as the voltage difference between each light bulb.

The potential difference may be a degree of the sum of vitality exchanged between two points in a circuit. Potential contrast is additionally known as voltage and is measured in volts (V).

The potential difference over a component is measured by employing a voltmeter set in parallel with the component. Voltage, moreover, known as electric weight, electric pressure, or (electric) potential contrast, is the distinction in electric potential between two focuses.

In an inactive electric field, it compares to the work required per unit of charge to move a test charge between the two focuses.

Learn more about the potential difference at

https://brainly.com/question/12198573

#SPJ4

Why are soft-bodied organisms less likely to leave a fossil trace than hard-bodied organisms?.

Answers

The soft body parts of the organism are more likely to deteriorate when buried inside the earth and hence they do not leave any fossil trace than the hard-bodied organisms.

Fossils are the remains, traces or impressions of the animals and plants that dies millions of years ago and were buried deep down in the Earth. The fossils provide information about the organisms of those times and also help in establishing the ancestral history of current organisms and their evolution.

Evolution is the change in species that occurs in long periods of time for generations over generations. The term evolution is a population concept because evolution can never be seen in one individual but is visible in a population.

To know more about fossils, here

brainly.com/question/2288828

#SPJ4

Iconic maine species such as moose, canada lynx, loons, boreal chickadees, eastern brook trout, saltmarsh sparrows and atlantic puffins are under stress from climate change. A mutation in the boreal chickadees increases the ability of the bird to catch and eat certain insects. Which factor might determine whether the frequency of the new allele will increase?.

Answers

The frequency of the new allele may be determined by whether the mutation offers the chickadees better access to food sources than those without it.

Mutation:

A mutation is a permanent change in the genetic material (the genome) of a cell of a live creature or of a virus that may be passed on to the cell's or virus's progeny. (Organic genomes are all made of DNA, although viral genomes can be made of either DNA or RNA; see heredity. The Physical Basis of Heredity.) A mutation in the DNA of a body cell of a multicellular organism (somatic mutation) can be passed on to descendant cells via DNA replication, resulting in a sector or patch of cells with abnormal function, such as cancer.

Mutations occur as a result of errors during the regular chemical transactions of DNA, most commonly during replication, or as a result of exposure to high-energy electromagnetic radiation (e.g., ultraviolet light or X-rays), particle radiation, or highly reactive substances in the environment. Mutations are believed to be largely harmful since they are random alterations, although some may be advantageous in specific settings. In general, the mutation is the primary source of genetic variation, which serves as the raw material for natural selection evolution.

To know more about mutation visit the link:

https://brainly.com/question/17031191

#SPJ4

HELP PLEASE!!! Match the correct term with the corresponding definition or description.

AND ANSWER ALL!!!!

Answers

The image below has the solution. To read the text, enlarge it.

Which of the following is a basic type of vaccine?
Select all that apply.
a. nucleic acid vaccines
b. subunit vaccine
c. live, attenuated vaccine
d. antitoxin vaccines

Answers

The basic type of vaccines are:

nucleic acid vaccines

subunit vaccine

live, attenuated vaccine

An easy, secure, and reliable method of preventing hazardous infections before you are exposed to them is vaccination. It boosts your immune system and builds up your body's natural defenses against particular illnesses.

Your immune system is trained by vaccinations to produce antibodies, exactly as it does when it is exposed to a disease. However, because vaccinations only include dead or weakened versions of bacteria or viruses, they do not really cause the disease or increase your chance of developing its symptoms.

In order to create immunity, vaccines act in conjunction with your body's natural defenses. Your immune system reacts when you receive a vaccination.

To know more about vaccines, visit:
https://brainly.com/question/6683555
#SPJ4

which of the following would be the first step in biosynthesis of a virus with a - (minus) strand of rna?
a. synthesis of protein from - strand RNA used as a template
b. synthesis of DNA from - strand RNA used as a template
c. synthesis of + stranded RNA from - strand RNA used as a template
d. synthesis of - stranded RNA from - strand RNA used as a template

Answers

Answer: Synthesis of double-strand RNA from an RNA template.

Explanation:

The ability to produce language is a function of _________, whereas the ability to understand language is a function of _________.

Answers

The ability to produce language is a function of Broca's area, whereas the ability to understand language is a function of Wernicke's area.

What distinguishes Wernicke's territory from Broca's area?

In essence, Wernicke's area strives to ensure that the language makes sense, but Broca's area attempts to guarantee that the language is produced in a fluent manner. The Wernicke-Geschwind model, which was later suggested by neurologist Norman Geschwind, built on this understanding of language.

Broca's area is situated in the neocortex's posterior-inferior frontal convexity, whereas Wernicke's area is restricted to the general region where the parietal, occipital, and temporal lobes converge. For the majority of people, the left hemisphere is where these areas function predominantly in terms of language.

To know more about Broca's area visit:

https://brainly.com/question/29412751

#SPJ4

A student is developing a model of sex cell formation.
X
X
XX
XX
X
t
DI
00
00
Which of the following conclusions can be made from the student's modol of why the dna of the daughter cells is different from the dna of the parent cell?

Answers

Answer:

Can you please include the answer choices....

Explanation:

Thanks. I'll answer it tho.

a(n) cell contains two sets of chromosomes, one set of chromosomes inherited from each parent. multiple choice question.

Answers

A diploid cell contains two sets of chromosomes, one set of chromosomes inherited from each parent.

A diploid cell contains two full sets of chromosomes. With 23 chromosomal pairs totaling 46 chromosomes, diploid human cells predominate. 22 pairs of autosomes and a pair of sex chromosomes make up this.

Chromosomes are arranged in homologous pairs in diploid cells. The term "diploid chromosomal number" refers to how many chromosomes are present in a cell as a whole (2n). In a diploid human cell, there are 46 chromosomes altogether since in this case, 2n = 46.

The DNA from both of the organism's parents makes up the homologous chromosomal pairs; the mother and father each contribute one chromosome to each pair.

To learn more about Diploid cells visit: https://brainly.com/question/1422869

#SPJ1

The trend for women to delay childbirth until their late 20s or early 30s has ___________ while the peak years for female fertility are ____________.

Answers

While the peak years for female fertility are declining, the trend for women to put off having children until their late 20s or early 30s has a high fertility rate.

Is childbirth more difficult in your 30s?

After you reach your mid-30s, pregnancy is something to think about more. Women who are older have a higher risk of miscarriage or stillbirth. They are more likely to experience preeclampsia, gestational diabetes, and to give birth to a very little child.

When do women start having children?

The prime reproductive years for women are from their late teens to late 20s. Age 30 marks the onset of a reduction in fertility (the capacity to become pregnant). Once you're in your mid-30s, this drop accelerates.

To know more about fertility rate visit:-

https://brainly.com/question/18625121

#SPJ4

Drag each tile to the correct location.
Sort the statements based on whether they describe DNA replication in eukaryotes or prokaryotes.
Replication takes place in
the nucleus.
Replication happens at just
one point on the chromosome.
There is only one origin of
replication.
Replication takes place
in the cytoplasm.
Prokaryotes
G
There are multiple origins
of replication.
Replication occurs at multiple
points along the chromosome.
Eukaryotes

Answers

The nucleus is where replication occurs in eukaryotes. Replication has several different origins. Along the chromosome, replication takes place several times. Prokaryotes replicate within their cytoplasm. Only one location on a chromosome experiences replication. There is just one origin for replication.

The process of DNA replication, which is managed by the enzyme DNA polymerase, involves the genetic material of a cell—in this case, the DNA—making a perfect copy of itself. In comparison to bacteria, which replicate at a pace of about 500 nucleotides per second, mammals replicate at a rate of about 50 nucleotides per second.

Prokaryotic DNA replication happens through a single origin of replication, whereas eukaryotic DNA replication occurs through numerous replication origins. This is the primary distinction between prokaryotic and eukaryotic DNA replication.

Thus, we can conclude that the location, complexity, and size of the cell have a role in the differences between DNA replication in prokaryotic and eukaryotic cells.

LEARN MORE ABOUT DNA REPLICATION HERE:

https://brainly.com/question/16464230

#SPJ1

a farmer performs a cross between two species of flowers and expects a distribution of red, pink, and white flowers. out of flowers, the following numbers of red, pink, and white flowers were observed. calculate the expected number of each type of flower.

Answers

Due of the flowers' inability to consistently produce the necessary 1:2:1 ratio of bloom colors, the farmer will be unable to meet demand. There are 250, 500, and 250.

A common flower is what?

The most widespread and well-liked flower genus in the world is undoubtedly the rose. There are over least 360 species of flowers in the Rosa genus, which includes these blooms. These blooms naturally occur in a variety of hues, including red, pink, apricot, and white.

What kind of flower is lovely?

Rose. The rose is known as the "queen of the garden" since it is thought to be the most flower petal in the entire world. It is one of most well-liked flowers on the planet and is available in a variety of hues and sizes. They are also widely distributed around the world.

To know more about farmer visit:

https://brainly.com/question/15589170

#SPJ4

Explain how a change in breathing rate is a homeostatic mechanism for a person at a higher
altitude.

Answers

An increased breathing rate takes in more oxygen to the lungs and bloodstream to maintain oxygen levels.

Other Questions
Which has more kinetic energy, a car of mass 500 kg traveling at 15 m/s or a motorcycle of mass 250 kg traveling at 30 m/s? The main difference between the art of Northern Renaissance and that of the Italian Renaissance is one of the differences between high density polyethylene (hdpe) and low density polyethylene (ldpe) is the higher crystallinity of ldpe. The cell membrane is composed of a phospholipid bilayer containing proteins and carbohydrates. Choose three of the statements that accurately reflect the structure and its function. Why is the degree of the dilated function one more than the degree of the original function? What is caustic exposure? put the following forms of electromagnetic radiation in order of increasing wavelength: clear all infrared visible microwave shortest wavelength second longest wavelength longest wavelength the degree of disability associated with hearing impairment or deafness is dependent to a large extent on: The Johnson family has decided to create a garden that is in the shape of a parallelogram. The base of the garden is 6 1/2 feet (ft). with a height 2 5/8ft. What is the area of the garden? What is the inverse of this function? f(x) = -1/2 square root x+3 x> -3. write 75 (base 10) using 2 numerals Plumbing: If a 45 gallon hot water tank holds 360 lbs of water, what weight of water will a 55 gallon tank hold? The plates that Mom bought are very fragile and expensive. She paid $16.68 per plate and there are eight plates. How much money did she spend on the plates? A couple plans to have children until a girl is born, but they will have no more than four children. Assume that each child is equally likely to be a boy or a girl. Let X be the number of girls they have. at mattress store, nate signs a contract to buy bedroom furniture. the contract sets a schedule of $500 monthly payments, subject to a late fee of 150 percent. nate finds the language of the contract difficult to understand. this is most likely Craig agreed to clean out the garage before going to the mall. His mom comes home and finds the garage is still a mess. When Craig comes home, his mom says: (what does mom want? ) danielle has been experiencing financial problems since a recent job loss. the $130 she received this week from the government in unemployment benefits was far too little to make much of a dent in her bills and living expenses. danielle therefore spent the money on a night out with friends to forget about her problems for a while. this is an example of coping. please choose the correct answer from the following choices, and then select the submit answer button. answer choices emotion-focused problem-minded social-focused problem-focused 45 points for this.Multiple parts a company that produces printers in the us is concerned with high inventory levels and inventory imbalance in europe. the european distribution center often finds itself with too much inventory of printers customized for certain markets, and not enough inventory of printers customized for others. customization is done in the us plant by adding labeling and documentation in the correct language and power supply. in order to address this problem, the company is considering shipping unlocalized printers to the european dc and localizing them after observing local demand. what supply chain concept is the manufacturer considering? group of answer choices Based on the text, what is the persons second action?