Convert 1.65 moles of nitrogen gas at STP to liters.

What is the coefficient of the scientific notation answer ? What is the exponent of the scientific notation answer ? How many significant figures are there in the answer ? What is the right most significant figure in the answer ?

Answers

Answer 1

Answer:

See explanation

Explanation:

We know that 1 mole of a gas occupies 22.4 L

Hence, 1.65 moles of nitrogen gas occupies 1.65 moles * 22.4 L/1 mole = 36.96 L or 3.696 * 10^1 L = 3.70 * 10^1 L

The exponent of the scientific notation answer = 1

The significant figures there are  in the answer = 4

The right most significant figure in the answer = 2


Related Questions

What is limit and exposure?

Answers

Answer:

An exposure limit is a legal or upper or lower level used as a safety measure to prevent health and safety risks caused by excessive exposure to a poisonous or harmful chemical. Exposure limits are simply the limitations established for substances that endanger human life and/or health.

Explanation:

Is Li and Cl likely to form ionic compounds?

Answers

Answer:

Well lithium is a metal and chlorine is a nonmetal. Therefore this is most likely going to be ionic

a soft drink bottle has fallen and brooked into many pieces

Answers

Answer:

c. colour

other options will have effect on the bottle

Is 20 grams of salt dissolved in 100 mL of water?

Answers

Yes, 20 grams of salt can be dissolved in 100 mL of water.

What is solubility?

Solubility is the ability of a substance to dissolve in a liquid or to be dispersed in another substance. It is a physical property of a substance that determines how much of a solute can be dissolved in a particular solvent. Solubility is a measure of the maximum amount of solute that can be dissolved in a given solvent at a particular temperature and pressure. Solubility is an important factor to consider when formulating products as it affects the concentration of the active ingredient or solute in the end-product.

The amount of salt that can be dissolved in a given amount of water is determined by the solubility of the salt. The solubility of salt in water is typically around 357 grams per liter, so 20 grams of salt can be dissolved in approximately 56 milliliters of water.

To know more about solubility click-

https://brainly.com/question/23946616

#SPJ4

Why is the freezing point of depression of 0.1 m NaCl solution nearly twice that 0.1 m glucose?

Answers

This is due to the fact that NaCl molecules are much smaller than glucose molecules.

What is molecules?

Molecules are the smallest particles of a substance that can still be identified as that substance. They are composed of two or more atoms that are chemically bonded together. Molecules are the fundamental building blocks of all matter, both living and nonliving. The number and type of atoms in a molecule determine its chemical identity.

The smaller molecules of NaCl can fit into the water molecules more easily than the larger glucose molecules, causing more water molecules to be displaced and therefore a higher freezing point.

To learn more about molecules
https://brainly.com/question/26044300
#SPJ4

A bond angle is the angle formed by the nuclei of _____ surrounding atoms with the nucleus of a central atom.

Answers

Answer: two;ideal;identical

Explanation:

The angle between two bonds on the same atom is known as the bond angle. It varies according to the number of lone pairs, hybridization, atom repulsion, and each atom's electronegativity.

What  bond angle is the angle formed by the nuclei?

The geometric angle formed by two adjacent bonds is known as a bond angle. Simple molecules can take on a variety of forms, such as: Atoms are connected in a straight line in a linear model.

The number of lone pairs an atom contains frequently influences the bond angle. In the case of an atom with no lone pairs, the form is trigonal planar, and the bond angle is 120°. The molecule has a 118 bond angle and one lone pair that generates a bent shape.

Therefore, We predict that the two zones of electron density will align themselves with a 180° bond angle on either side of the centre atom using the VSEPR theory.

Learn more about bond angle here:

https://brainly.com/question/13751116

#SPJ12

Classify the following monosaccharides according to the position of the carbonyl group and the number of carbon atoms in the molecule.

Answers

The first structure is ketotetrose.

The second structure is ketohexose.

The third structure is aldohexose.

Monosaccharides are the most fundamental form of sugar and are the monomers from which all other types of carbohydrates are produced. They are also frequently referred to as simple sugars. In addition to this, they are the most basic form of sugar. The majority of the time, these compounds have a crystalline form, are white in color, and are soluble in water. Despite their common name, monosaccharides are not all sugars. Only certain monosaccharides have a flavor that can be described as sweet. The structure of the great majority of monosaccharides can be represented mathematically as CnH₂nOn. disaccharides and polysaccharides are created from monosaccharides, which are the foundational building blocks of carbohydrates. Sucrose, most commonly referred to as table sugar, is a disaccharide.

The complete question is attached as an image.

Want to know more about monosaccharides visit the link which is given below;

https://brainly.com/question/13416862

#SPJ4

What will be the ratio of the root mean square speeds of the molecules?

Answers

The root mean square speeds of the molecules of a gas is calculated as  [tex]V_{rms}[/tex][tex]= \sqrt{\frac{3RT}{M} }[/tex]

After that, the speeds of the molecules are calculated at the two different temperatures as given in the question and then, the ratio is calculated by dividing.

Here, T is the temperature,

         m is the mass of the molecules and

         R is the Gas constant.

Let's taken an example of the two temperatures are as follows:

[tex]T_{1}[/tex]=270K

[tex]T_{2}[/tex]=30K

We know that the root mean square speed of the molecules is given as:

 [tex]V_{rms} = \sqrt{\frac{3RT}{M} }[/tex]

Putting the values of the temperatures and calculating the root mean square speeds of the molecules:

[tex]V_{rms1} = \sqrt[]{\frac{3R*270}{M} }[/tex]

[tex]V_{rms2} = \sqrt{\frac{3R*30}{M} }[/tex]

Dividing the above two root mean square speed equations in order to get the ratio of the two, we get,

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{\sqrt{\frac{3R*270}{M} } }{\sqrt{\frac{3R*30}{M} } }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \sqrt{\frac{9}{1} }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{3}{1}[/tex]

Hence, the ratio of the root mean square speeds of the molecules of an ideal gas at 270K and 30K is 3:1.

Note: It is important to note that the root-mean-square speed is the measure of the speed of particles in a gas, defined as the square root of the average velocity-squared of the molecules in a gas. The mass and the Gas constant values for a particular gas remain the same and only temperature is the variant.

To know more about root mean square speeds, check:

https://brainly.com/question/13095222

#SPJ4

Using this equation: HONH2 + H2O ⇔ HONH3+ + OH− a) Identify the acid on the left and its conjugate base on the right b) Identify the base on the left and its conjugate acid on the right Please show how you arrived at answers thank you!

Answers

a. The acid on the left is H₂O and its conjugate base on the right is OH⁻.

b. The base on the left is HONH₂ and its conjugate acid on the right is HONH₃⁺.

Chemical reactions between acids and bases always produce its conjugate base and its conjugate acid. According to Bronsted-Lowry

Acid on the left side of a chemical reaction always donates a proton (H⁺)Its conjugate base on the right side of a chemical reaction is the remaining acid after the acid is donated.Base on the left side of a chemical reaction always accepts a proton (H⁺)Its conjugate acid on the right side of a chemical reaction is the remaining base after the base accepts a proton.

HONH₂ + H₂O ⇄ HONH₃⁺ + OH⁻

HONH₂ becomes HONH₃⁺
HONH₂ accepts a proton, so HONH₂ is a base
HONH₃⁺ is a conjugate acidH₂O becomes OH⁻
H₂O donates a proton, so H₂O is an acid
OH⁻ is a conjugate base


Learn more about conjugate acid and base here: https://brainly.com/question/12584785

#SPJ4

Why is freezing point depression 0.21 m sodium chloride solution nearly twice that of 0.1 m glucose solution?

Answers

NaCl, as an electrolyte, dissociates almost completely to give 'Na(+) and Cl(-)' ions, whereas glucose, as a non-electrolyte .

What is depression at the freezing point?

A solute's freezing point is completely based on its concentration, not on its mass or chemical composition. A typical instance of freezing point depression is when salt reduces the freezing point of water in cold weather.

Frost point When solute molecules are added to a solvent, a colliding phenomenon known as depression results.

As a result, the freezing temperatures of all solutions are lower than those of pure solvents and are inversely related to the solute's molality.

study the freezing point.

Visit

https://brainly.com/question/9530198

#SPJ4

if we are heated a metal with 28g mass then we add it in a coffee cup with 28g water. the water temperature raised from 19 degree to 23.8 oc. what was the initial temperature of the metal. the water specific heat of water is 4.184 j/g oc.

Answers

Specific Heat of the metal will be = 4.184 J/C

Mass of metal = 28 g

Mass of water = 28 g

Rise in temperature = 23.8 - 19 = 4.8 C

Specific heat of water = 4.184 J/C

Let the specific heat of metal =S

The heat released by metal =mass of metal * specific heat of metal * Change in temperature

[tex]& =28\times S \times 4.8{ }^{\circ} \mathrm{C} \\& =134.4 S^{\circ} \mathrm{C}[/tex]

Heat absorbed by water = mass of water x specific heat of water x change in temp. [tex]=28 \times 4.184 \times 4.8=562.3296 J[/tex]

Using the principal of Caloriemeter:

We have, Heat released by metal = Heat absorbed by water

134.4S = 562.3296 =>4.184 J/C

For similar question on Specific heat:

https://brainly.com/question/21406849

#SPJ4

The correct question should be:

if we are heated a metal with 28g mass then we add it in a coffee cup with 28g water. the water temperature raised from 19 degree to 23.8 oc. what was the specific heat of the metal. the water specific heat of water is 4.184 j/g oc.

You are given a small beaker of solution at room temp. You add a bit of solute to the solution and it dissolves. The solution was:.

Answers

Answer:

UNsaturated

Explanation:

Eventually by adding solute you will reach a point where no more will dissolve....then it is saturated

If you start out with a 136 gram sample of Plutonium that has a half life of 8, how much will be left after 32 days?

Answers

To solve this type of question we must know the concept of rate law. Therefore, 8.242g will be left after 32 days. The kinetic for the decay of Plutonium is of first order kinetics.

What is the expression for rate law for first order kinetics?

There are two kinds of rate law in chemical kinetics one is differential rate law and other is integrated rate law.

The rate law for first order kinetics is

K=(2.303/T)×log(a/a-x)

half life=0.693/K

Where

k - rate constant

t - time passed by the sample

a - initial amount of the reactant

a-x - amount left after the decay process

K=0.693/half life

K=0.693/ 8

 =0.086

0.086=(2.303/ 32)×log( 136/a-x)

0.086=0.07×log( 136/a-x)

1.22=log( 136/a-x)

136/a-x=16.5

a-x=8.242g

Therefore, 8.242g will be left after 32 days.

Learn more about rate law for first order kinetics, here:

https://brainly.com/question/12593974

#SPJ1

What is parabola give example?

Answers

Parabola is line formed from fixed points on a plane curve.

Parabola is described as a plane curve generated by a point moving so that its distance from a fixed point is equal to its distance from a fixed line and the intersection between a right circular cone and a plane parallel to an element of the cone.

The name "parabola" is given due to Apollonius, who discovered many properties of conic sections. It means "application", referring to "application of areas" concept, which has a connection with this curve, as Apollonius had proved. The focus–directrix property of the parabola and other conic sections exists due to Pappus.

Learn more about parabola from the link given below.

https://brainly.com/question/21685473

#SPJ4

For work to be accomplished, an object must move in the same /BLANK\ as the applied /BLANK\ .

Answers

For work to be accomplished, an object must move in the same direction as the applied force.

What is work?

Work in physics refers to the measure of energy expended in moving an object; most commonly, force times distance.

It is said that no work is done if the object does not move. When a force acts upon an object to cause a displacement (directional distance) of the object, it is said that work was done upon the object.

In order for work to be done, the object must move in the same direction as the force being applied to it.

Applied force is the force which is applied to an object by another object. For example, a person pushing a barrel is an example of applied force. When the person pushes the barrel then there is an applied force acting upon the barrel.

Therefore, the correct answers have been inserted into the blank in the main answer section.

Learn more about work at: https://brainly.com/question/2750803

#SPJ1

Do Scope 3 emissions include customers?

Answers

Yes, Scope 3 emissions include emissions that are a result of a Customer's activities but are not under its direct control.

These emissions can be caused by a wide range of activities, such as the use of products and services by customers. Therefore, customers' GHG emissions from using a company's products or services would be included in the company's Scope 3 emissions. For example, if a car manufacturer includes the GHG emissions from the use of its cars by customers in its Scope 3 emissions, this would include the emissions from the fuel burned by the customers while driving the cars.

Learn more about Scope 3 Emission here:

https://brainly.com/question/29546967

#SPJ4

how many nítrate ions are present in 5.7 moles of calcium nitrate?

Answers

As a result, 5.7 of calcium nitrate contains 1.02 × 10²⁵ nitrate ions..

What is calcium nitrate?

Called Norgessalpeter, calcium nitrate is an inorganic substance having the formula Ca(NO3)2x. The unusual anhydrous chemical absorbs moisture from the environment to form the tetrahydrate. Salts can be found in two different states: hydrated and anhydrous. Calcium nitrate is a chemical compound that dissolves in water and has several applications, including the treatment of water, fertilizers, concrete, and cold packs. Calcium nitrate is mostly utilized in wastewater treatment to eliminate hydrogen sulfide-related odors and guard against oxygen shortage.

What is calcium nitrate used for and its side effects?

Calcium nitrate is a chemical compound that dissolves in water and has several applications, including the treatment of water, fertilizers, concrete, and cold packs. Calcium nitrate is mostly utilized in wastewater treatment to eliminate hydrogen sulfide-related odors and guard against oxygen shortage.

Lethargy, muscle weakness, vomiting, nausea, and constipation are all signs of hypercalcemia. Some calcium salts irritate the digestive tract. Dermal irritation may result from even brief skin contact with caustic calcium salts.

Briefing:

1 mole of Ca(NO₃)₂ contains = 6.022 × 10²³ formula Units

So,

5.7 mole of Ca(NO₃)₂ will contain = X Formula Units

Solving for X,

X = (5.7 mol × 6.022 × 10²³ formula units) ÷ 1 mol

X = 3.43 × 10²⁴ Formula Units

As discussed,

1 Formula Unit of Ca(NO₃)₂ contains = 3 Ions

So,

3.43 × 10²⁴ Formula units will contain = X ions

Solving for X,

X = (3.43 × 10²⁴ Formula Unit × 3 Ions) ÷ 1 Formula Unit

X = 1.02 × 10²⁵ Ions

To know more about Calcium Nitrate visit:

https://brainly.com/question/11567557

#SPJ1

50 Points!! NEED ANSWER NOW WILL MARK BRAINLIEST

What kind of mutation does this image represent? Illustration of chromosome 5 mutation with q as the bottom and p as the top. One pair is of the same p and q and another pair 5p minus is one full and another has half p and full q.

A. deletion

B. duplication

C. insertion

D. inversion

E. substitution

Answers

The given image represents the deletion kind of mutation. Therefore, option (A) is correct.

What is the deletion in genetics?

In genetics, a deletion can be described as a mutation in which a part of a chromosome or a sequence of DNA is left while DNA replication. From a single base to an entire piece of chromosome any number of nucleotides can be deleted.

Some chromosomes have weak spots where breaks take place which results in the deletion of a part of the chromosome. The separation can be induced by heat, viruses, radiation, and chemicals. When a chromosome breaks, the missing piece of a chromosome is known as deletion.

The single base deletion mutations take place by a single base flipping in the template DNA, followed by DNA strand slippage.

Learn more about deletion, here:

https://brainly.com/question/26919766

#SPJ1

W
If a chemist starts with 100 grams of Al(OH)3, how much water will be produced?
2Al(OH)3 + 3H₂ →
2AI + 6H₂O

Answers

2Al(OH)3 + 3H₂ →2AI + 6H₂O , 2 moles of Al(OH)3 give ,3 moles of H₂O. so, 100gm of  Al(OH)3 gives 300 gm of H₂O.

What causes an endothermic reaction?

Endothermic chemical processes are those that generally absorb (or use) energy. When bonds in the reactants are broken in endothermic reactions, more energy is absorbed than is released when new bonds are created in the products.

What does the an in n a stand for?

Not applicable, (also known as N/A), is a written acronym for not applicable that is used on forms when you are unable to provide a relevant (i.e., answer the question) response. Related words and phrases are part of the SMART Vocabulary. undesirable and inappropriate. amiss.

Learn more about redox reaction here :

https://brainly.com/question/13293425

#SPJ1

Which of the following elements will have more than 2 electrons and have a full outer orbital?

He
Ne
C
N
O

Answers

Protons All Elements' Neutrons & Electrons (List + Images) Atomic number: all protons, neutrons, and electrons 5 Boron is made up of 5 protons, 6 neutrons, and 5 electrons.

6 Carbon consists of 6 protons, 6 neutrons, and 6 electrons. Protons, neutrons, and electrons total seven for nitrogen. Oxygen contains 8 protons, 8 neutrons, and 8 electrons. 34 more rows

Protons All Elements' Neutrons & Electrons (List + Images) 1 Atomic number All Elements Have Two Electrons. Diagram of 3 Shells 4 Neon Magnesium (5) Aluminum 6 Phosphorus 7 Sulfur 8 9 Argon Potassium 10 More things...

All elements' protons, neutrons, and electrons Diagram of a shell One proton, zero neutrons, and one electron make up hydrogen. Helium contains two protons, two neutrons, and two electrons.

To learn more about electrons please click on below link

https://brainly.com/question/1255220

#SPJ4

What are the 4 steps of the enzymatic cycle?

Answers

The enzymatic cycle has four steps, and they include the following;

1. The reaction between the Enzyme and Substrate

2. The substrate/enzyme complex formation

3. Catalysis

4. Enzyme releases a product

A small molecule will attach to the enzyme's active site and stop the action. The plants adapt by changing amino acid(s) in the enzyme. They adjust the structure and are continuously active; the small molecule cannot limit this enzyme.

The four steps in an enzyme cycle are;

1. The substrate and enzyme are found in one region. There are times when there is more than one substrate molecule and the enzyme changes.

2. The enzyme will then be trapped on the substrate in the special region called the active site. The combination is called substrate/enzyme complex. The active site will be in a shaped special region for the enzyme, which fits around a substrate.

3. Catalysis will happen when the Substrate changes. It can be broken down or combined with other molecules forming something new. It will break and form chemical bonds; afterward, a product/enzyme complex will occur.

4. The enzyme will release a product. When the enzyme is relaxed, it will return to its original shape and be ready to work on the other substrate molecule.

To learn more about the enzyme, refer;

brainly.com/question/1596855

#SPJ4

design a synthesis of acetophenone from benzyl alcohol and methanol

Answers

To design a synthesis of acetophenone from benzyl alcohol and methanolBenzyl alcohol is converted to Benzaldehyde using PCC. Mean while methanol was converted to methyl bromide and Generated Grignard reagent.

Benzaldehyde react with Grignard reagent to give secondary alcohol which is oxidized to Acetophenone by PCC.benzaldehyde and methylmagnesium bromide are the appropriate starting material for AcetophenoneMethanol, the most basic alcohol (CH3OH), is a chemical key component in hundreds of everyday items such as plastics, paints, automobile parts, and building supplies. Methanol is also a clean energy source of information that is used to power cars, trucks, buses, ships, fuel cells, boilers, and cook stoves. . Chronic methanol vapour poisoning can cause eye inflammation (conjunctivitis), recurrent cramps, giddiness, insomnia, stomach disruptions, and visual failure.

To learn more about Benzaldehyde here:

https://brainly.com/question/28146845

#SPJ4

(a) Determine the ar geometry of Sef4 using the VSEPR model. Select The molecular geometry of SeF4 i (b) Explain why the molecular geometry of SeFs is different from that of IF, although they have similar electron-domain Although both Sefs and IF, have the electron-domain geometry of Select lone electron pair(s) in theSelect positions. Accordingly, the molecular geometry of Sefs is Select.. . IF has lone pair(s) of electrons whereas SeF4 has only ' | , but that of 1F3 is

Answers

Electron geometry is provided by four electron pair pairs. The lone pair would have molecular geometry and would result in lone pair-bonded pair repulsions.

Tetrahedral geometry is the four-electron pair geometry.

Trigonal bipyramidal geometry with a four-electron pair and a single pair

(b). Electron geometry is created by five pairs of electrons. In order to reduce lone pair-bonded pair repulsions, the lone pair occupies an equatorial position, and the molecule would have molecular geometry.

Trigonal bipyramidal geometry is the five-electron pair's geometry.

See-saw geometry is the geometry with a five-electron pair and a single pair.

(c). The geometry of the electron is made up of six pairs. To reduce lone pair-lone pair repulsions, the two lone pairs would be in opposing locations, and the molecule would have molecular geometry.

Octahedral geometry is the geometry with the six electron pairs.

To learn more about Electron geometry please click on below link

https://brainly.com/question/7558603

#SPJ4

Cotton in solid but it floats on water. Why?

Answers

Lower density than water
The pores tend to trap the air and thus the density of cotton becomes less than that of the water

How many grams of solute are needed to make 3450 ml of a 2.25 M solution of Ca(NO3)2?

Answers

1.567 g of solute is needed to make 3450 ml of a 2.25 M solution of Ca(NO3)2.

How does molarity work?

The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

What does a solution's molarity mean?

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.

No. of moles of NO₃⁻ = (0.1528 mol/L) × (125.00/1000 L) = 0.0191 mol

Each mole of Ca(NO₃)₂ contains 2 moles of NO₃⁻.

No. of moles of Ca(NO₃)₂ = (0.0191 mol) × (1/2) = 0.00955 mol

Molar mass of Ca(NO₃)₂ = (40.078 + 14.007×2 + 15.999×6) g/mol = 164.086 g/mol

Mass of Ca(NO₃)₂ required = (0.00955 mol) × (164.086 g/mol) = 1.567 g

Learn more about Molarity here:

brainly.com/question/8732513

#SPJ1

Why is there chemical bonding at all?

Answers

The simplest response is that atoms are attempting to enter the most stable (lowest-energy) state possible. When an atom meets the octet rule or forms chemical bonds, many of them become stable.

What exactly is chemical bonding used for?

The attraction between two or more atoms that enables them to combine to produce a stable chemical compound is known as chemical bonding. Chemical bonds can have many different types, but covalent and ionic bonds are the most well-known. When one atom has less energy, the other has enough thanks to these bonds.

What are responsible for chemical bonding?

The valence electrons are the ones in charge of forming chemical bonds. Atoms trade electrons to form chemical bonds. Ionic and covalent bonds are the two basic types of bonding. When two atoms with different electronegativity join together, ionic connections are formed.

Learn more about chemical bonding here:

brainly.com/question/15444131

#SPJ1

which of the following is an example of pure chemistry? a. an analytical chemist determining the best way to filter contaminants out of drinking water b. a biochemist studying how the ribosome (a large complex of proteins) works c. an inorganic chemist developing a new alloy for use on ships that is resistant to corrosion by sea water d. an organic chemist working to synthesize a new cancer drug

Answers

a biochemist investigating the function of the massive protein complex known as the ribosome

What action might a chemical analyst take?

In industry, academia, and government, analytical chemists are used in many facets of chemical research. They conduct fundamental laboratory research, create procedures and products, create analytical instrumentation, teach, and engage in marketing and legal activities.

What are the four types of chemical analytical techniques?

Analytical chemistry is important in four main areas since it is used in many different scientific fields. These fields include chromatography, potentiometry, acid-base techniques, and spectroscopy.

To know more about Biochemist

Visit:

https://brainly.com/question/8167734

What are the 4 routes of chemical exposure?

Answers

There are four primary routes through which a chemical may enter the body:breathing (inhalation) (breathing)Contact with the skin or the eyes swallowing and injecting

How many different ways are there to be exposed to chemicals?

Chemicals must reach your body in order to harm your health.The three basic "routes of exposure," or methods by which a chemical enters your body, are as follows.BREATHING

What are the three exposure routes?

The method via which a person may come into touch with a dangerous material is referred to as an exposure pathway.There are three primary exposure routes: direct touch, ingestion, and inhalation.Measuring the quantity of the dangerous material just at point of contact allows for the determination of the degree and extent of exposure.

To know more about chemical exposure visit:
https://brainly.com/question/29548487

#SPJ4

Here Are Sketches Of Four Electron Orbitals:

Answers

Out of the sketch of the orbitals, the options are:

Electrons are in S orbital: yes.The list of electrons in an orbital is electrons B and C.Any of them in the p orbital: yes.List of the p orbital: electron D.

What are orbitals?

A three-dimensional representation of an electron's most likely position within an atom is called an orbital. The likelihood of discovering an electron near a hydrogen atom's nucleus is depicted in the diagram below. The 1s orbital has the highest likelihood, as you can see.

A p orbital resembles a pair of lobes on either side of the nucleus, or it has a slightly dambell-like structure. A p orbital electron has an equal chance of being in either half.

Therefore, the correct options are:

Electrons are in S orbital: yes.The list of electrons in an orbital is electrons B and C.Any of them in the p orbital: yes.List of the p orbital: electron D.

To learn more about orbitals, refer to the link:

https://brainly.com/question/18914648

#SPJ4

The question is incomplete. Your most probably complete question is given below: the image is added.

Draw the best Lewis structure for XeI2.

Answers

In the XeI₂ Lewis structure, a xenon atom displays a xenon atom in the center, surrounded by two iodine atoms. There are two single bonds connecting the xenon atom to each iodine atom. There are three lone pairs on the xenon atom and both iodine atoms.

Lewis's structure is a pattern or diagram that describes the number of valence electrons of the atoms that will form chemical bonds. The Lewis structure is also known as the electron dot formula.

Several stages of how to write a Lewis structure:

First determine the center of the atom.Count on all the valence electrons of the atom. If the species is an ion, then add as many electrons as the ion has a negative charge or subtract the number of electrons with a positive charge.Create an electron pair for each bond.Complete the duplet or octet rule for the atoms bonded to the central atom.Add if necessary, the electron pairs on the central atom.If the atom center has not reached the octet rule, then a double bond must be formed to reach the octet rule.

Learn more about Lewis's structure at https://brainly.com/question/20300458

#SPJ4

Other Questions
Converting Real Life Scale.. -Page 2-NEED HELP ASAPPP 80 POINTS(picture is linked belowww)tysm like fr How do you write numbers less than 10? Which type of paragraph uses sensory details to appeal to the reader's 5 senses and create the mood of the paragraph? T/F in contract law, "consideration" refers to the time that a party takes to evaluate a deal. What is the mean of 2 4 6 8 10 12? What are three ways to prevent contamination when working with bacteria? 72,12,2 simplest form 1. T or F: La semana Santa se celebra despus de Pascua what feature is used on memory slots and modules to prevent modules from being inserted incorrectly? How did States respond to the Supreme Court ruling in Furman v. Georgia? What is basic food safety management? What is absolute advantage What is comparative advantage under what conditions does comparative advantage lead to gains from trade? Can you refuse to testify in court as a witness? A biochemist has discovered a new membrane protein in a eukaryotic cell. To determine the type of membrane protein, she decides to perform laboratory tests on the cell. She discovers that the protein is an integral membrane protein. Select the experimental scenarios that correctly support the finding that the protein is an integral membrane protein? Try to dissolve the protein out of the membrane with an aqueous buffer, then try to dissolve the protein with a nonpolar solvent. If the protein is solubilized in the nonpolar solvent but not in the aqueous buffer, it is probably an integral protein. Try to dissolve the protein out of the membrane with an aqueous buffer, then try to dissolve the protein with a detergent solution. If the protein is solubilized in the detergent solution but not in the aqueous buffer, it is probably an integral protein. Try to dissolve the protein out of the membrane with an aqueous buffer at low pH, then try to dissolve the protein with an aqueous buffer at neutral pH. If the protein is solubilized in the buffer at low pH but not in the buffer at neutral pH, it is probably an integral protein. Try to dissolve the protein out of the membrane with an aqueous buffer containing a chelating agent that removes Ca+, then try to dissolve the protein in an aqueous buffer without the chelating agent. If the protein is solubilized in the buffer with the chelating agent but not in the buffer without the chelating agent, it is probably an integral protein. Try to dissolve the protein out of the membrane with an aqueous buffer containing urea, then try to dissolve the protein in an aqueous buffer without urea. If the protein is solubilized in the buffer with urea but not in the buffer without urea, it is probably an integral protein. A nurse is participating in a disaster simulation in which a toxic substance is released into a crowded stadium. Multiple clients are transported to the facility. Which of the following activities would be the lowest priority for the nurse?a.Preventing cross-contamination of clientsb.Performing concise client assessmentc.Transferring a client to the discharge locationd.Maintaining a client tracking system What is the value of 4? What are the benefits and harmful effects of carbon dioxide in the environment? What is an example of open door policy? The _____ budget is used for the cost of fixed assets like plants and equipment.Multiple Choicemastercapitalproductioncashcost What is the main conflict between Jing Mei and her mother in two kinds?