Construct a 98% confidence interval for the true mean for exam 2 using * = 72 28 and 5 = 18.375 and sample size of n = 25? O (63.1.81.4) O (26.5.118.1) O (64.7.79.9) O (59.1.854)

The chi-square test statistic uses observed frequencies in a contingency table to determine whether an association exists between two nominal random variables by comparing them to expected frequencies.

Here's the step-by-step explanation:
1. Construct a contingency table, showing the observed frequencies of each combination of the two nominal variables.
2. Calculate the expected frequencies for each cell in the table, using the formula: (Row Total * Column Total) / Grand Total.
3. Compute the chi-square test statistic using the formula: Χ² = Σ [(O - E)² / E], where O represents the observed frequencies, E represents the expected frequencies, and Σ indicates the summation of all cells in the table.
4. Determine the degrees of freedom (df) for the chi-square test, using the formula: df = (number of rows - 1) * (number of columns - 1).
5. Compare the calculated chi-square test statistic to the critical value from the chi-square distribution table, using the appropriate degrees of freedom and desired significance level (typically 0.05).
6. If the chi-square test statistic is greater than the critical value, reject the null hypothesis and conclude that there is a significant association between the two nominal variables. If it's less than or equal to the critical value, fail to reject the null hypothesis and conclude that there is no significant association.

By following these steps, the chi-square test uses observed frequencies in a contingency table to determine the presence or absence of an association between two nominal random variables.

To learn more about “chi-square” refer to the https://brainly.com/question/4543358

#SPJ11

Option (a) k(1 - P) matches the correct equation.

The given circumstance depicts a situation where the pace of progress of the division P of the populace who has heard a letting it be known story is relative to the small portion of the populace who has not yet heard the report.

The differential equation that follows can be used mathematically to represent this situation:

dP/dt = k(1 - P)

where P is the fraction of the population who has heard the news story, and k is the proportionality constant.

Choice (a) k(1 - P) matches the right condition, as it has a similar structure as the given differential condition. This condition expresses that the pace of progress of P is relative to the result of a steady k and the division (1 - P), which addresses the extent of the populace who has not yet heard the report.

On the other hand, Option (b) K(P-1) is incorrect due to its incorrect form. It implies that P's rate of change is inversely proportional to the difference between P and 1, which is not the case in this particular circumstance.

Option c: 1-KP, option d: KP-1, option e: +KP, option g: -KP, option h: None of these, and option i: None of these are incorrect as well.

know more about differentiation visit:

https://brainly.com/question/24898810

#SPJ1

The derivative of y = cos(1 - e / (1 +⁸ˣ 8ˣ)) is y' = [8e⁸ˣsin(1 - e⁸ˣ) × (1 + 8ˣ)] + [(8e⁸ˣln8 + 8ˣln8)cos(1 - e⁸ˣ)] / (1 + 8ˣ)².

To find the derivative of y = cos(1 - e⁸ˣ / (1 + 8ˣ)), we need to use the chain rule and quotient rule.

First, let's find the derivative of the numerator:

y' = -sin(1 - e⁸ˣ) × (-8e⁸ˣ / (1 + 8ˣ)²)

Next, let's find the derivative of the denominator:

y' = (1 + 8ˣ)(-8e⁸ˣln8 - 8ˣln8) / (1 + 8^x)²

Now, using the quotient rule, we can combine these derivatives:

y' = [(-sin(1 - e⁸ˣ) × (-8e⁸ˣ / (1 + 8ˣ)²)) × (1 + 8ˣ)] - [(cos(1 - e⁸ˣ) × (-8e⁸ˣln8 - 8ˣln8)) / (1 + 8ˣ)²]

Simplifying this expression gives:

y' = [8e⁸ˣsin(1 - e⁸ˣ) × (1 + 8eˣ)] + [(8e⁸ˣln8 + 8eˣln8)cos(1 - e⁸ˣ)] / (1 + 8eˣ)²

Therefore, the derivative of y = cos(1 - e / (1 +⁸ˣ 8ˣ)) is y' = [8e⁸ˣsin(1 - e⁸ˣ) × (1 + 8ˣ)] + [(8e⁸ˣln8 + 8ˣln8)cos(1 - e⁸ˣ)] / (1 + 8ˣ)².

To learn more about derivative here:

brainly.com/question/30365299#

#SPJ11

Answer:

Step-by-step explanation:

To calculate the y-component, we need to determine the y-component for each of these masses:

If m1 is at the origin, it is at (0,0). This means that it is at y=0.

If m2 is at (4.0,5.4), it is at y = 5.4.
If m3 is at (1.0, 2.8), it is at y = 2.8.

Thus, we can use the equation for finding equilibrium, which is each mass x position, divided by all the masses:

(m1 * 0 + m2 * 5.4 + m3 * 2.8) / (m1+m2+m3) = 2.53 (3 sig figs)

To find the volume, you need to multiply all the values together.

1/3 x 5/6 x 2/3 = 5/27

The given sequence 1, 4/3, 5/3, 2, ... is neither an arithmetic nor a geometric sequence.

An arithmetic sequence is a sequence of numbers in which the difference between any two consecutive terms is always the same. This difference is called the "common difference" and is denoted by the letter "d". The first term of an arithmetic sequence is usually denoted by "a".

The general form of an arithmetic sequence can be written as:

a, a + d, a + 2d, a + 3d, ...

According to the given information:

The given sequence 1, 4/3, 5/3, 2, ... is neither an arithmetic nor a geometric sequence.

An arithmetic sequence is a sequence in which the difference between any two consecutive terms is constant. In other words, if you subtract any term from its adjacent term, you will always get the same value. Similarly, a geometric sequence is a sequence in which the ratio between any two consecutive terms is constant. In other words, if you divide any term by its adjacent term, you will always get the same value.

Let's check the given sequence to see if it satisfies the conditions for arithmetic or geometric sequences:

1 - 4/3 = -1/3

4/3 - 5/3 = -1/3

5/3 - 2 = -1/3

As we can see, the differences between consecutive terms are not constant, so the given sequence is not an arithmetic sequence.

1 / (4/3) = 3/4

(4/3) / (5/3) = 4/5

(5/3) / 2 = 5/6

As we can see, the ratios between consecutive terms are not constant, so the given sequence is not a geometric sequence.

Therefore, the given sequence 1, 4/3, 5/3, 2, ... is neither an arithmetic nor a geometric sequence.

To know more about arithmetic sequence visit: https://brainly.com/question/29616017

#SPJ1

Answer:

Arithmetic

Step-by-step explanation:

4/3-1= 1/3

1+1/3=4/3

4/3+1/3=5/3

5/3+1/3=6/3

6/3=2

So that means this is an arithmetic sequence.

Answer:

The correct answer is d. average.

Step-by-step explanation:

The mean is a measure of central tendency in statistics and is often referred to as the average of a data set. It is calculated by adding up all the values in the data set and dividing by the total number of values. The mean is a common way to summarize a data set and provides a single value that represents the "typical" value of the data. It is not the same as the mode, which is the most frequently occurring value in the data set, or the range, which is the difference between the largest and smallest values in the data set

The solution of the given differential equation is :

p(t) = A*e^(k*sin(t)), where A is a constant value.

The differential equation given is:

dp/dt = (k*cos(t))p, where k is a positive constant.

This equation models a population that undergoes yearly fluctuations. To find the solution of this equation, we can use the method of separation of variables.

First, separate the variables by dividing both sides by p and multiplying both sides by dt:

(dp/p) = (k*cos(t))dt

Now, integrate both sides with respect to their respective variables:

∫(1/p)dp = ∫(k*cos(t))dt

Upon integrating, we get:

ln|p| = k*sin(t) + C

To solve for p, take the exponent of both sides:

p(t) = e^(k*sin(t) + C)

Since e^C is also a constant, we can write the solution as:

p(t) = A*e^(k*sin(t))

Here, A is a constant that depends on the initial conditions of the problem. This solution represents the population that undergoes yearly fluctuations based on the given differential equation.

To learn more about differential equations visit : https://brainly.com/question/28099315

#SPJ11

Assume that the linear system [tex]Ax = b[/tex] has more than one solution, and let [tex]x1[/tex] and [tex]x2[/tex] be two distinct solutions. Let [tex]x3 := ux1+7x2[/tex], where µ, [tex]7 E IR[/tex] with the property that [tex]u+n = 1.[/tex]

Then we have: [tex]Ax1 = b and Ax2 = b[/tex] since x1 and x2 are solutions.

Subtracting the second equation from the first, we get: [tex]A(x1 - x2) = 0.[/tex]

Since [tex]x1[/tex] and [tex]x2[/tex]are distinct solutions, we know that [tex]x1 - x2 ≠ 0[/tex].

Therefore,[tex]A(x1 - x2) = 0[/tex] this implies that the columns of A are linearly dependent. That is, there exist scalars [tex]c1, c2, ..., cn[/tex] (not all zero) such that

[tex]c1a1 + c2a2 + ... + cnan = 0,[/tex]

where [tex]a1, a2, ...,[/tex]and an are the columns of A.

Let x be any solution of Ax = b. Then we have:[tex]A(x + tx3) = Ax + tAx3 = b + tAx3[/tex]

where t is any scalar. But we know that [tex]Ax3 = A(ux1 + 7x2) = uAx1 + 7Ax2 = ub + 7b = 8b,[/tex] since [tex]Ax1 = Ax2 = b.[/tex]

Therefore, we have: [tex]A(x + tx3) = b + t(8b) = (1 + 8t)b.[/tex]

Thus, [tex]x + tx3[/tex] is a solution of [tex]Ax = b[/tex] for any scalar t.

In particular, if we take [tex]t = 1/n,[/tex] where n is any nonzero integer, we get:

[tex]x + (1/n)x3 = (1 - 1/n)x + (1/n)ux1 + (7/n)x2.[/tex]

Since [tex]u + 7 = 1,[/tex] we have:[tex](1/n)ux1 + (7/n)x2 = (1/n)((1 - u)x1 + ux1 + 7x2) = (1/n)x1 + (7/n)x2.[/tex]

Therefore, we can write:[tex]x + (1/n)x3 = (1 - 1/n)x + (1/n)x1 + (7/n)x2.[/tex]

This shows that [tex]x + (1/n)x3[/tex] is another solution of Ax = b for any nonzero integer n. Since we can find infinitely many integers n such that 1/n is nonzero, we conclude that there are infinitely many solutions of .

Therefore, if the linear system [tex]Ax = b[/tex] has more than one solution, then it must have infinitely many solutions.

To learn more about linear systems, visit here

https://brainly.com/question/21404414

#SPJ4

if y = 4 x^3 - 5x and dx/dt=4, by Using the chain rule dy/dt = 172 when x = 2.

Given the function y = 4x^3 - 5x and we need to find dy/dt when x = 2 and dx/dt = 4. We can do this using the following steps:

Step 1: Differentiate the function y with respect to x to find dy/dx.
Thus, First, we find f'(x) by taking the derivative of y with respect to x:

dy/dx = d(4x^3 - 5x)/dx = 12x^2 - 5

Step 2: To find dy/dt, we need to find dy/dx and substitute x = 2 into the resulting expression, along with dx/dt = 4. Thus, substitute the given value of x = 2 into the expression for dy/dx.
dy/dx = 12(2)^2 - 5 = 12(4) - 5 = 48 - 5 = 43

Step 3: Use the chain rule to find dy/dt, which states that dy/dt = dy/dx * dx/dt.

Step 4: Finally, we use the chain rule formula to find dy/dt when x = 2:

Substitute the values of dy/dx and dx/dt into the chain rule equation.
dy/dt = 43 * 4 = 172

So, when x = 2 and dx/dt = 4, dy/dt = 172.

Know more about chain rule click here:

https://brainly.com/question/30764359

#SPJ11

The total number of fish caught over the first 14 years is1,554,393 fish over the first 14 years.

The number of fish caught each year decreases by 3%, which means the company catches 97% of the previous year's total.

Therefore, the number of fish caught each year can be calculated as follows:

Year 1: 130,000

Year 2: 130,000 x 0.97 = 126,100

Year 3: 126,100 x 0.97 = 122,243

Year 4: 122,243 x 0.97 = 118,419

Year 5: 118,419 x 0.97 = 114,627

Year 6: 114,627 x 0.97 = 110,867

Year 7: 110,867 x 0.97 = 107,138

Year 8: 107,138 x 0.97 = 103,441

Year 9: 103,441 x 0.97 = 99,775

Year 10: 99,775 x 0.97 = 96,140

Year 11: 96,140 x 0.97 = 92,535

Year 12: 92,535 x 0.97 = 88,960

Year 13: 88,960 x 0.97 = 85,416

Year 14: 85,416 x 0.97 = 81,902

Therefore, the total number of fish caught over the first 14 years is:

130,000 + 126,100 + 122,243 + 118,419 + 114,627 + 110,867 + 107,138 + 103,441 + 99,775 + 96,140 + 92,535 + 88,960 + 85,416 + 81,902 = 1,554,393

Rounded to the nearest whole number, the company caught a total of 1,554,393 fish over the first 14 years.

Learn more about word problems at https://brainly.com/question/21405634

#SPJ1

The Pigeonhole Principle states that if there are more pigeons than pigeonholes, then there must be at least one pigeonhole with two or more pigeons. In this case, there are 7 days of the week (pigeonholes) and 110 days (pigeons) to choose from.

Therefore, if we divide the 110 days into 7 groups based on the day of the week, the largest group can have at most ⌊110/7⌋ = 15 days. But since we have 7 groups, by the Pigeonhole Principle, at least one group must have more than ⌊110/7⌋ = 15 days. Thus, at least 16 of any 110 days chosen must fall on the same day of the week.

In simpler terms, if you have 110 days to choose from and only 7 days of the week, it is inevitable that some days will have to overlap.

In fact, at least one day of the week must have more than 15 days chosen, which means at least 16 days must fall on that day of the week. This principle can be applied to many situations where there are more items to choose from than categories to put them in.

To know more about Pigeonhole Principle click on below link:

https://brainly.com/question/30322724#

#SPJ11

The profit is maximum when 40 lawns are mowed.

Given that Kieran is starting a lawn-mowing buisness in her neighborhood. She creates a graph to help her determine what to charge customers per lawn to maximize her profits. She uses {c} to represent the number of lawns she mows and {y} to represent her profit in dollars.

The profit is maximum when 40 lawns are mowed as at this point the the peak of the parabola occurs.

Therefore, the profit is maximum when 40 lawns are mowed.

Learn more about profit on

https://brainly.com/question/30953272

#SPJ1

Answer:

The hose can run for 7.5 minutes, 9 minutes, and 12 minutes.

The hose can't run for 0 minutes, 7 minutes, 9.75 minutes, or 10.3 minutes.

Here's why:

Vanessa needs to water her plants for at least 7.5 minutes.

Vanessa can't leave the hose running for more than 12 minutes because it will waste water.

Step-by-step explanation:

Answer:

The hose can run for 7.5 minutes, 9 minutes, and 12 minutes.

The hose can't run for 0 minutes, 7 minutes, 9.75 minutes, or 10.3 minutes.

Here's why:

Vanessa needs to water her plants for at least 7.5 minutes.

Vanessa can't leave the hose running for more than 12 minutes because it will waste water.

Step-by-step explanation:

The area under the normal curve to the right of μ equals 0 . Thus, option C is correct.

Probability is a measure of the likelihood or chance of an event occurring. It is a number between 0 and 1, with 0 representing an impossible event and 1 representing a certain event. The probability of an event is calculated by dividing the number of ways the event can occur by the total number of possible outcomes.

The area under the normal curve to the right of μ equals 0, which means that the entire normal distribution is to the left of μ.

This is because the normal distribution is a symmetric probability distribution, and so half of the area is to the left of the mean and half is to the right. Therefore, if all the area is to the left of μ, then none is to the right.

Option A, σ, represents the standard deviation of the normal distribution and is not related to the area to the right of μ.

Option B, 1/2, is incorrect because it represents the area to the right of the median, which is not necessarily the same as the mean for a normal distribution.

Option D, 1/σ√2π, is incorrect because it represents the height of the normal curve at the mean, not the area to the right of the mean.

hence, The area under the normal curve to the right of μ equals 0.

To know more about probability visit :

https://brainly.com/question/13604758

#SPJ1

To find the net change in velocity from time t=1 to time t=5, we need to integrate the acceleration function a(t) from t=1 to t=5. The net change in velocity from time t=1 to time t=5 is approximately 37.539 units (rounded to three decimal places).

To find the net change in velocity from time t=1 to time t=5, we need to find the definite integral of the acceleration function a(t) = ln(3t^4) with respect to time over the interval [1, 5]. To do this, we integrate a(t) with respect to t:∫[1 to 5] ln(3t^4) dtLet's call the antiderivative of a(t) as v(t), which represents the velocity function:v(t) = ∫ln(3t^4) dtNow, to find the net change in velocity, we evaluate v(t) at t=5 and t=1, and subtract the results:Net change in velocity = v(5) - v(1)Once you compute this, you will have the net change in velocity from time t=1 to time t=5.

Learn more about integration here: brainly.com/question/18125359

#SPJ11

The volume of a hemisphere with a diameter of 8.6 cm, is 167 cm^3.

The volume of a hemisphere  can be calculated using the formular below;  (2/3)πr^3 cubic units.

In this case we can see that  

π = constant whose value is equal to 3.14 approximately.

r” = radius of the hemisphere

given that  diameter = 8.6 cm

radius = 8.6 cm/2 = 4.3 cm

(2/3)πr^3  = (2/3) * π * 4.3 ^3

= 166.519 cm^3

Therefore , the volume of a hemisphere with a diameter of 8.6 cm, can be expressed as 166.519 cm^3.

Learn more about hemisphere at:

https://brainly.com/question/1417593

#SPJ1

The best measure of variability for the given data is the range, and it equals 9.

The range is the difference between the maximum and minimum values in a dataset.

As per the question, the maximum value is 4, and the minimum value is 1. Therefore, the range is 4 - 1 = 3.

The interquartile range (IQR) is another measure of variability that is useful for identifying the spread of data.

However, since there are no outliers in the given data, the range is a sufficient measure of variability.

Hence, the best measure of variability for the given data is the range, and it equals 9.

Learn more about the interquartile range here:

brainly.com/question/11647487

#SPJ1

Answer:

The total surface area of a cube can be found using the formula 6s^2, where s is the length of an edge.

In this case, s = 3 meters, so the surface area of one face is 3^2 = 9 square meters.

There are 6 faces in a cube, so the total surface area that needs to be painted is:

6 x 9 = 54 square meters

Therefore, the correct answer is 54 m².

Using a standard normal distribution table or the cumulative distribution function (CDF), the area under the standard normal curve to the right of z=−1.5 is approximately 0.0668, rounded to four decimal places.

Explanation:

To find the area under the standard normal curve to the right of z=−1.5, Follow these steps:

Step 1: To find the area under the standard normal curve to the right of z=−1.5, we need to use a standard normal distribution table or calculator.

Using a standard normal distribution table, we can find the area to the right of z=−1.5 is 0.0668 (rounded to four decimal places).

Step 2: Alternatively, we can use a calculator or statistical software to find the area using the cumulative distribution function (CDF) of the standard normal distribution. Using a calculator or software, we get the same result of 0.0668.

Therefore, the area under the standard normal curve to the right of z=−1.5 is approximately 0.0668, rounded to four decimal places.

To know more about the area under the standard normal curve click here:

https://brainly.com/question/29095265

#SPJ11

The function f(t) is 0 for t < 0, [tex]t^2[/tex] for 0 ≤ t ≤ 1, and t for t > 1.

The Heaviside function H(t) is defined as:

H(t) = 0, if t < 0

H(t) = 1, if t ≥ 0

Using the Heaviside function, we can write the piecewise function f(t) as:

[tex]f(t) = t^2 * H(t) + (t - t^2) * H(t - 1)[/tex]

Here's how the function works:

For t < 0, H(t) = 0, so f(t) = 0

For 0 ≤ t ≤ 1, H(t) = 1, so f(t) = [tex]t^2[/tex]

For t > 1, H(t) = 1 and H(t - 1) = 0, so f(t) = t

Therefore, the function f(t) is 0 for t < 0, [tex]t^2[/tex] for 0 ≤ t ≤ 1, and t for t > 1.

Learn more about heaviside function

brainly.com/question/30891447

#SPJ11

The equal-weighted average, the market capitalization-weighted average, and the volume-weighted average.

The type of average that sums the price of each stock and divides the total by a divisor is called a "price-weighted average". In this type of average, the price of each stock is used as a weight to determine its contribution to the overall index.

For example, suppose we have an index with three stocks: A, B, and C. The price of each stock is $10, $20, and $30, respectively. To calculate the price-weighted average of this index, we would add up the prices of each stock and divide by a divisor, which is usually adjusted for changes in the stock prices or for the addition or removal of stocks from the index. In this case, the calculation would be:

($10 + $20 + $30) / 3 = $20

So the price-weighted average of this index is $20.

One drawback of price-weighted averages is that they are sensitive to changes in the prices of higher-priced stocks, since those stocks have a greater weight in the index. This can lead to distortions in the index if the prices of the higher-priced stocks change significantly. Additionally, price-weighted averages do not take into account the market capitalization or trading volume of each stock, which may not accurately reflect the overall market or sector performance.

Other types of averages that address these limitations include the equal-weighted average, the market capitalization-weighted average, and the volume-weighted average.

To learn more about contribution visit:

https://brainly.com/question/10410785

#SPJ11

The probability of drawing at least one red card is (d) 60/90.

The probability of drawing at least one red card can be found by finding the probability of drawing two yellow cards and subtracting that from 1.

The probability of drawing a yellow card on the first draw is 6/10. The probability of drawing a yellow card on the second draw, without replacement, is 5/9 (since there are only 9 cards left). So the probability of drawing two yellow cards in a row is:

(6/10) * (5/9) = 30/90

To find the probability of drawing at least one red card, we can subtract this from 1:

1 - 30/90 = 60/90

So the answer is (d) 60/90.

Know more about probability    here:

https://brainly.com/question/13604758

#SPJ11

The series is convergent because sn can be expressed as a telescoping sum, which means that the series will approach a finite value as n approaches infinity.

To determine whether the series [infinity] cos 4n − cos 4n/2n=1 is convergent or divergent by expressing sn as a telescoping sum, we can rewrite the terms using the identity cos 2x = 2cos²ˣ − 1:

cos 4n − cos 4n/2n=1 = 2cos^24n/2 − 1 − 2cos^24n/2n+1 + 2cos^24n+2/2n+2 − 1

This expression has a telescoping sum because each term cancels with the previous and next terms. So we can simplify it as:

s_n = (2cos² 2n − 1) − (2cos² 2n+1 − 1)

s_n = 2(cos² 2n − cos² 2n+1)

s_n = −2(cos² 2n+1 − cos² 2n)

Therefore, the series is convergent because sn can be expressed as a telescoping sum, which means that the series will approach a finite value as n approaches infinity.

To learn more about convergent here:

brainly.com/question/15415793#

#SPJ11

The Option C is correct that Negative 3 less-than x less-than-or-equal-to 2 by solving inequality using an algebraic expression.

The equation-like form of the formula 5x 4 > 2x + 3 has an arrowhead in place of the equals sign. It is an illustration of inequity. The left half, 5x 4, is larger than the right half, 2x + 3, as evidenced by this.

To solve the inequality, we need to isolate the variable, x, in the middle of the inequality.

Starting with:

-4 < 3x + 5 ≤ 11

Taking out 5 from each component of the inequality:

-4 - 5 < 3x + 5 - 5 ≤ 11 - 5

Simplifying:

-9 < 3x ≤ 6

Dividing by 3 (and remembering to reverse the direction of the inequality if we divide by a negative number):

-3 < x ≤ 2

Therefore, the solution to the inequality is:

-3 < x ≤ 2

To know more about inequality visit:-

https://brainly.com/question/30231190

#SPJ1

The Option C is correct that Negative 3 less-than x less-than-or-equal-to 2 by solving inequality using an algebraic expression.

The equation-like form of the formula 5x 4 > 2x + 3 has an arrowhead in place of the equals sign. It is an illustration of inequity. The left half, 5x 4, is larger than the right half, 2x + 3, as evidenced by this.

To solve the inequality, we need to isolate the variable, x, in the middle of the inequality.

Starting with:

-4 < 3x + 5 ≤ 11

Taking out 5 from each component of the inequality:

-4 - 5 < 3x + 5 - 5 ≤ 11 - 5

Simplifying:

-9 < 3x ≤ 6

Dividing by 3 (and remembering to reverse the direction of the inequality if we divide by a negative number):

-3 < x ≤ 2

Therefore, the solution to the inequality is:

-3 < x ≤ 2

To know more about inequality visit:-

https://brainly.com/question/30231190

#SPJ1

Answer:

Step-by-step explanation:

So 20% of the science club students is 10.

I am trying to find 100% as this equals ALL the students on the science club trip.

20% = 10

100% / 20% = 5

This means I need to multiply both sides by 5 to get to 100%
20% = 10

(Multiply both sides by 5)

100% = 50

Therefore there are 50 students in the science club (C)

The lim(x→∞) x*sin(6π/x) does not exist.

The limit you want to find is lim(x→∞) x*sin(6π/x). To solve this limit, we will use l'Hospital's Rule, which is applicable when the limit takes the indeterminate form 0*∞.

Step 1: Rewrite the limit as a fraction:
lim(x→∞) (sin(6π/x)) / (1/x)

Step 2: Apply l'Hospital's Rule by differentiating both the numerator and the denominator:
Numerator: d(sin(6π/x))/dx = (6π*cos(6π/x)) * (-1/x²)
Denominator: d(1/x)/dx = -1/x²

Step 3: Simplify the limit:
lim(x→∞) [(6π*cos(6π/x)) * (-1/x²)] / [-1/x²] = lim(x→∞) 6π*cos(6π/x)

Step 4: Evaluate the limit:
Since cos(6π/x) oscillates between -1 and 1 as x approaches infinity, the limit does not exist.

To know more about l'Hospital's Rule click on below link:

https://brainly.com/question/14105620#

#SPJ11

To solve for n in the given equation:

2 - (1/2n) = 3n + 16/(2 - 1/n)

First, we can simplify the right-hand side of the equation by finding a common denominator for the fraction:

2 - (1/2n) = (3n(2n - 1) + 16n)/(2n - 1)

Next, we can simplify the left-hand side of the equation by combining like terms:

(4n - 1)/2n = (3n(2n - 1) + 16n)/(2n - 1)

We can then cross-multiply and simplify:

(4n - 1)(2n - 1) = 3n(2n - 1) + 16n

8n^2 - 6n + 1 = 6n^2 + 11n

2n^2 - 17n + 1 = 0

Using the quadratic formula, we can solve for n:

n = (17 ± sqrt(17^2 - 4(2)(1)))/(2(2))

n = (17 ± sqrt(281))/4

Therefore, the two solutions for n are:

n = (17 + sqrt(281))/4 or n = (17 - sqrt(281))/4

Both solutions are real numbers, but they are not integers.

Mark Brainleist

The period of simple harmonic motion of the mass-spring system can be found using the formula: T = 2π√(m/k) where T is the period, m is the mass, and k is the spring constant.

In this case, the mass of the object is 2 N, but we need to convert this to kilograms by dividing by the acceleration due to gravity: m = 2 N / 9.8 m/s^2 = 0.204 kg The spring constant is given as 4 N/m. Plugging in these values to the formula, we get: T = 2π√(0.204 kg / 4 N/m) = 2π√(0.051 m) ≈ 0.804 s .

Therefore, the period of simple harmonic motion for this mass-spring system is approximately 0.804 seconds. Now, we can find the period using the mass (0.204 kg) and the spring constant (4 N/m). T = 2π √(0.204 kg / 4 N/m) T ≈ 2π √(0.051) T ≈ 1.42 s The period of simple harmonic motion is approximately 1.42 seconds.

To know more about mass click here

brainly.com/question/941818

#SPJ11

If a researcher conducted a 2-tailed, non-directional test with an alpha level of .04, then the corresponding critical value Z-score(s) for a 2-tailed, non-directional test with an alpha level of 0.04 would be -2.06 and 2.06, respectively.

Explanation:

To find the critical value z-scores for a 2-tailed, non-directional test with an alpha level of 0.04, you can follow these steps:

Step 1. Divide the alpha level by 2, since it's a 2-tailed test: 0.04 / 2 = 0.02.

Next, we can use a standard normal distribution table or a Z-score calculator to find the Z-score(s) that correspond to an area of 0.02 in the tail(s) of the standard normal distribution.

For a 2-tailed test, we need to find two critical values, one for each tail. Since the standard normal distribution is symmetric, the critical values will be the same in magnitude but opposite in sign. So, we need to find the Z-score that corresponds to an area of 0.02 in the lower tail and the Z-score that corresponds to an area of 0.02 in the upper tail.

Step 2. Use a z-score table or online calculator to find the z-score corresponding to an area of 0.98 (1 - 0.02) in the standard normal distribution.

Therefore, the corresponding critical value Z-score(s) for a 2-tailed, non-directional test with an alpha level of 0.04 would be -2.06 and 2.06, respectively.

The correct answer is:
a. +2.06 and -2.06

These z-scores represent the critical values, with 2% of the area in each tail of the distribution.

Know more about the z-score table click here:

https://brainly.com/question/31613365

#SPJ11