Consider the sum 10 + 21 +32 +43 + ... +406. A. How many terms (summands) are in the sum? B. Compute the sum using a technique discussed in this section.

Answer:

68.5 m² (3 s.f.)

Step-by-step explanation:

OA and OC are radii of the circle with center O.

As BA and BC are tangents to the circle, and the tangent of a circle is always perpendicular to the radius, the measures of ∠OAB and ∠OCB are both 90°.

The sum of the interior angles of a quadrilateral is 360°. Therefore:

[tex]\begin{aligned}m \angle OAB + m \angle OCB + m \angle AOC + m \angle ABC &= 360^{\circ}\\90^{\circ} + 90^{\circ} + 120^{\circ} + m \angle ABC &= 360^{\circ}\\300^{\circ} + m \angle ABC &= 360^{\circ}\\m \angle ABC &= 60^{\circ}\end{aligned}[/tex]

The line OB bisects ∠AOC and ∠ABC to create two congruent right triangles with interior angles 30°, 60° and 90°. (See attached diagram).

Therefore triangles BOA and BOC are 30-60-90 triangles.

This means their sides are in the ratio 1 : √3 : 2 = OA : AB : OB.

Therefore, as OA = 10 m, then AB = 10√3 m and OB = 20 m.

The area of triangle BOA is:

[tex]\begin{aligned}\textsf{Area\;$\triangle\;BOA$}&=\dfrac{1}{2} \cdot OA \cdot AB\\\\&= \dfrac{1}{2} \cdot 10 \cdot 10\sqrt{3}\\\\&= 50\sqrt{3}\;\sf m^2\end{aligned}[/tex]

As triangle BOA is congruent to triangle BOC, the area of kite ABCO is:

[tex]\begin{aligned}\textsf{Area\;of\;kite\;$ABCO$}&=2 \cdot 50\sqrt{3}\\&=100\sqrt{3}\;\sf m^2\end{aligned}[/tex]

[tex]\boxed{\begin{minipage}{6.4 cm}\underline{Area of a sector}\\\\$A=\left(\dfrac{\theta}{360^{\circ}}\right) \pi r^2$\\\\where:\\ \phantom{ww}$\bullet$ $r$ is the radius. \\ \phantom{ww}$\bullet$ $\theta$ is the angle measured in degrees.\\\end{minipage}}[/tex]

Given the angle of the sector is 120° and the radius is 10 m, the area of sector AOC is:

[tex]\begin{aligned}\textsf{Area\;of\;sector\;$AOC$}&=\left(\dfrac{120^{\circ}}{360^{\circ}}\right) \pi \cdot 10^2\\\\&=\dfrac{1}{3}\pi \cdot 100\\\\&=\dfrac{100}{3}\pi\; \sf m^2 \end{aligned}[/tex]

The area of the shaded region is the area of kite ABCO less the area of sector AOC:

[tex]\begin{aligned}\textsf{Area\;of\;shaded\;region}&=100\sqrt{3}-\dfrac{100}{3}\pi\\&=68.4853256...\\&=68.5\;\sf m^2\;(3\;s.f.)\end{aligned}[/tex]

Therefore, the area of the shaded region is 68.5 m² (3 s.f.).

The net change in velocity from time t=1 to time t=5 is approximately 34.65 units.

To find the net change in velocity from time t=1 to time t=5, we need to integrate the acceleration function a(t) = ln(3 + t⁴) with respect to time between t=1 and t=5.

∫(a(t) dt) from 1 to 5 = ∫(ln(3 + t⁴) dt) from 1 to 5

Using the substitution u = 3 + t⁴ and du/dt = 4t³, we get:

∫(ln(3 + t⁴) dt) = (1/4)∫(ln(u) du)

= (1/4) [u × ln(u) - u] from 3 + 1⁴ to 3 + 5⁴

= (1/4) [(3+5⁴)×ln(3+5⁴) - (3+1⁴)×ln(3+1⁴) - (3+5⁴) + (3+1⁴)]

≈ 34.65

Therefore, the net change in velocity from time t=1 to time t=5 is approximately 34.65 units.

To learn more about net change here:

brainly.com/question/18845964#

#SPJ11

The alpha level for a hypothesis test is a value that defines the concept of "significance level" or "level of significance".

The significance level, denoted as α, represents the threshold at which the null hypothesis is rejected in favor of the alternative hypothesis. It is a predetermined value chosen by the researcher to determine the level of confidence required to reject the null hypothesis.

The critical region, also known as the rejection region, consists of the extreme or unlikely values of the test statistic that would lead to the rejection of the null hypothesis.

These values are determined based on the chosen alpha level. If the calculated test statistic falls within the critical region, the null hypothesis is rejected in favor of the alternative hypothesis.

The critical region is defined by the alpha level, and it represents the probability of observing extreme test statistics under the assumption that the null hypothesis is true.

In other words, it defines the values of the test statistic that would be considered statistically significant, and that would lead to the rejection of the null hypothesis if observed.

The specific values that define the critical region are determined by the nature of the hypothesis test and the type of test being conducted, such as one-tailed or two-tailed test.

Learn more about Statistics

brainly.com/question/29093686

#SPJ11

The iterated integral by converting to polar coordinates is:

-1/2([tex]e^{(-36) }[/tex] - 1)

An iterated integral is a mathematical concept used to calculate the area, volume, or mass of an object. It is the process of evaluating a double or triple integral by integrating one variable at a time. In the case of a double integral, this means integrating first with respect to one variable and then integrating the result with respect to the other variable. In the case of a triple integral, this means integrating first with respect to one variable, then the second, and finally the third.

For the given problem, we have the iterated integral:

∫₀⁶ ∫₀√(36-x²) [tex]e^{(x^{2}-y^{2} ) }[/tex] dy dx

To convert to polar coordinates, we first need to draw the region of integration. The region is a quarter circle centered at the origin with a radius of 6.

Next, we determine the bounds of integration. Since the region is a quarter circle, we have 0 ≤ θ ≤ π/2 and 0 ≤ r ≤ 6.

To express the integrand in terms of r and θ, we use the substitution x = r cos(θ) and y = r sin(θ). This gives us:

[tex]e^{(-x^{2}-y^{2} ) }[/tex]= [tex]e^{(-r^{2}) }[/tex]

Substituting these into the original integral, we get:

∫₀⁶ ∫₀π/2 [tex]e^{(-r^{2}) }[/tex] r dr dθ

This is the double integral in polar coordinates. We can now evaluate it using the limits of integration and the integrand expressed in terms of r and θ. The integration gives:

-1/2([tex]e^{(-36)}[/tex]- 1)

So the final answer is -1/2([tex]e^{(-36)}[/tex] - 1).

To know more about the iterated integral visit:

brainly.com/question/30426225

#SPJ1

To determine if there is an association between hours of sleep and calories consumed per day,

you should use option B: Pearson's R. Pearson's R, also known as Pearson's correlation coefficient, measures the strength and direction of the linear relationship between two continuous variables, in this case, sleep and calories.

The Pearson correlation coefficient (r) is the most common way of measuring linear correlation. It is a number between –1 and 1 that measures the strength and direction of the relationship between two variables. When one variable changes, the other variable changes in the same direction.

To know more about Pearson's correlation coefficient:

https://brainly.com/question/15353989

#SPJ11

To determine if there is an association between hours of sleep and calories consumed per day,

you should use option B: Pearson's R. Pearson's R, also known as Pearson's correlation coefficient, measures the strength and direction of the linear relationship between two continuous variables, in this case, sleep and calories.

The Pearson correlation coefficient (r) is the most common way of measuring linear correlation. It is a number between –1 and 1 that measures the strength and direction of the relationship between two variables. When one variable changes, the other variable changes in the same direction.

To know more about Pearson's correlation coefficient:

https://brainly.com/question/15353989

#SPJ11

The statement "The area below the price and above the supply curve measures the producer surplus in a market" is a. TRUE.

Producer surplus is represented by this area, as it shows the difference between the market price and the minimum price a producer is willing to accept for a good or service.

The area below the price and above the supply curve represents the amount that producers are willing to sell their goods for (supply curve) and the price that they actually receive (market price).

The difference between these two amounts is the producer surplus, which is the measure of the benefit that producers receive from participating in a market.

Visit here to learn more about Supply Curve:

brainly.com/question/11717727

#SPJ11

Answer:

The number of ways to select 7 players out of 16 is given by the combination formula:

C(16,7) = 16! / (7! * (16-7)!) = 11440

Once the coach has selected the 7 players, the order in which they are arranged does not matter. Therefore, the number of ways to arrange the team is simply the number of ways to select 7 players:

11440 ways.

The percentage of their product is defective is 16%.

Let's assume that the factory makes 4x puzzle cubes and x puzzle spheres.

Then the number of defective cubes is 1.5% of 4x, or 0.015(4x) = 0.06x.

Similarly, the number of defective spheres is 2% of x, or 0.02x.

The total number of defective products is the sum of defective cubes and defective spheres, or 0.06x + 0.02x = 0.08x.

The total number of products is the sum of puzzle cubes and puzzle spheres, or 4x + x = 5x.

Therefore, the percentage of defective products is:

(0.08x / 5x) x 100% = 1.6%

Therefore, 1.6% of their products are defective.

Learn more about percent, here:

https://brainly.com/question/14894467

#SPJ1

Hence proved that if n is a power of 2, then[tex]i = \theta (log_2 n).[/tex]

We have n as a power of 2, so we can write n as:

[tex]n = 2^k[/tex]

Taking logarithm base 2 on both sides, we get:

[tex]log_2 n = k[/tex]

Now, let's substitute i = 0, 1, 2, ..., k in the given equation:

[tex]2^i[/tex]= θ(i)

[tex]2^{(2i)}[/tex] = θ(i)

[tex]2^{(3i)} = \theta(i)[/tex]

...

[tex]2^{(k+i)}[/tex] = θ(i)

We can see that the expression on the left side of each equation is exactly [tex]n^{(2i/k)}[/tex], so we can write:

[tex]n^{(2i/k)}[/tex] = θ(i)

Taking logarithm base 2 on both sides, we get:

[tex](2i/k) log_2 n = log_2 \theta(i)[/tex]

Simplifying, we get:

[tex]i = (k/2) log_2 \theta (i) + C[/tex]

where C is a constant that depends on the value of i.

Since [tex]k = log_2 n[/tex], we can substitute k in the above equation:

[tex]i = (log_2 n/2) log_2 \theta(i) + C[/tex]

Simplifying, we get:

[tex]i = (1/2) log_2 n log_2 \theta (i) + C'[/tex]

where C' is a constant that depends on the value of i.

Thus, we can conclude that:

[tex]i = \theta(log_2 n)[/tex]

Therefore, we have shown that if n is a power of 2, then[tex]i = \theta (log_2 n).[/tex]

Learn more about logarithmic functions

brainly.com/question/30284289

#SPJ11

The confidence level cannot be determined without knowing the sample size (n) and the population standard deviation (σ) or the sample standard deviation (s) with the degrees of freedom. Your answer: (a) 90%, (b) 99% and (c) 70%

Let's determine the confidence level for each large-sample one-sided confidence bound:
(a) Upper bound: x + 1.28s/√n
The z-score of 1.28 corresponds to a one-tailed confidence level of 90%. So, the confidence level for this upper bound is 90%.
(b) Lower bound: x - 2.33s/√n
The z-score of 2.33 corresponds to a one-tailed confidence level of 99%. So, the confidence level for this lower bound is 99%.
(c) Upper bound: x + 0.52s/√n
The z-score of 0.52 corresponds to a one-tailed confidence level of approximately 70%. So, the confidence level for this upper bound is 70%.

To learn more about confidence level, click here:

brainly.com/question/22851322

#SPJ11

The joint PDF of X and Y is f(x, y) = 1/2 for 0 < x < 2 and 0 < y < 1.

The joint PDF of two random variables X, Y given by f(x, y) = C, where 0 < x < 2 and 0 < y < 1, is a uniform distribution. To find C, you can use the property that the total probability should equal 1.


1. Recognize that the problem describes a uniform distribution.
2. Determine the range of the variables: X ranges from 0 to 2, and Y ranges from 0 to 1.
3. Calculate the area of the rectangle formed by these ranges: Area = (2 - 0) * (1 - 0) = 2.
4. Use the property that the total probability should equal 1: ∫∫f(x, y)dxdy = 1.
5. Since the distribution is uniform, f(x, y) = C, and the integral becomes ∫∫Cdxdy = C * Area.
6. Solve for C: C * Area = C * 2 = 1, therefore C = 1/2.

To know more about joint PDF click on below link:

https://brainly.com/question/31064509#

#SPJ11

complete question:

Consider the joint PDF of two random variables X, Y given by f x,y (x, y) = C, calculate the joint PDF of X and Y .

Points A, B and C are collinear and X is a bisector of ∠A.

To prove that A, B, and C are collinear, we need to show that they lie on the same straight line.

So, we have the following statements and reasons

Therefore, we have proved that A, B, and C are collinear.

To prove that X is a bisector of ∠A, we need to show that ∠AXB = ∠CXB. We can do this using a two-column proof:

Therefore, we have proven that X is a bisector of ∠A.

Read more about proofs at

https://brainly.com/question/18286984

#SPJ1

Answer:

To find the dependent value for the graph y = 20 - 2x when the independent value is 5, we substitute x = 5 into the equation and solve for y.

y = 20 - 2x

y = 20 - 2(5)

y = 20 - 10

y = 10

Therefore, when x = 5, the dependent value y is 10.

Answer:

To find the dependent value (y) for the given graph y = 20 - 2x when the independent value (x) is 5, we substitute x = 5 into the equation and solve for y.

y = 20 - 2x

Substituting x = 5:

y = 20 - 2(5)

y = 20 - 10

y = 10

So, when x = 5, the dependent value (y) is 10.

Your answer: {1, 2, 3, 4, 5, 6} in roster notation

To list the elements of the set in, follow these steps:

1. Identify the distinct digits in the number 654,323.
2. Arrange them in roster notation, which means listing them within curly brackets.

The distinct digits in the number 654,323 are 2, 3, 4, 5, and 6.

So, the elements of the set in roster notation are {2, 3, 4, 5, 6}.

learn more about "roster notation":-https://brainly.com/question/26668005

#SPJ11

As the limit exists and is a finite value, the sequence is convergent. However, without further information on the absolute value of the sequence, it cannot be determined whether it is absolutely convergent or conditionally convergent.

The given sequence is of the form an/(1+an) where an is a positive sequence.

We can see that as n approaches infinity, an will also approach infinity. So we can rewrite the given sequence as 1/(1/an + 1) which is of the form 1/(infinity + 1) which equals 0.

Since the limit exists and is equal to 0, we can say that the given series is convergent.

However, we cannot determine whether it is absolutely convergent, conditionally convergent or divergent without additional information about the sequence.

Based on the given information, the sequence "an" approaches 1 as n approaches infinity.

In order to determine its convergence, we need to analyze the limit of the sequence. The limit can be expressed as:

lim (n → ∞) an

Since an approaches 1 as n approaches infinity, the limit is equal to 1:

lim (n → ∞) an = 1

Visit here to learn more about Sequence:

brainly.com/question/30485932

#SPJ11

The probability value for p(x = 6) is obtained to be 1/8.

What is probability?

Probability is a way to gauge how likely something is to happen. Many things are difficult to forecast with absolute confidence. Using it, we can only make predictions about the likelihood of an event happening, or how likely it is. Probability can range from 0 to 1, with 0 denoting an impossibility and 1 denoting a certainty.

As x is a discrete uniform random variable ranging from one to eight, it means that the probability of x taking any value from 1 to 8 is equal and is given by -

P(x = i) = 1/8, where i = 1, 2, ..., 8

So, to find P(x=6), we simply substitute i = 6 in the above formula -

P(x = 6) = 1/8

This means that the probability of x taking the value 6 is 1/8 or 0.125.

Since the distribution is uniform, each value between 1 and 8 is equally likely to occur, and therefore has the same probability of 1/8.

In other words, if we sample this random variable many times, we would expect to observe the value 6 approximately 12.5% of the time.

Therefore, the value is obtained as 1/8.

To learn more about probability from the given link

https://brainly.com/question/23286309

#SPJ1

The area of the first quadrant bounded by the curve and both coordinate axes is 2/3 ([tex]5^{(3/2)}[/tex] - 5).

The given curve is y² = 5 - x, which is a parabola opening towards the left with a vertex at (5,0).

To find the area of the first quadrant bounded by the curve and both coordinate axes, we need to integrate the curve with respect to x over the range [0,5].

Since the curve is given in terms of y², we can rewrite it as y = ±√(5-x). However, we only need the positive root for the first quadrant, so we have y = √(5-x).

Thus, the area can be calculated as:

A = ∫[0,5] y dx

= ∫[0,5] √(5-x) dx

= 2/3 ([tex]5^{(3/2)}[/tex] - 5)

Learn more about the bounded area at

https://brainly.com/question/26315835

#SPJ4

First, let's recall that two matrices A and B are considered similar if there exists an invertible matrix P such that A = PBP⁻¹.

Now, let's use this definition to prove both parts of the question:
(a) We want to show that A − λI and B − λI are similar. To do this, we need to find an invertible matrix P such that (A − λI) = P(B − λI)P⁻¹.

Let's start by manipulating the equation A = PBP⁻¹ to get A − λI = P(B − λI)P⁻¹.
Now, let's substitute this into the equation we want to prove:
A − λI = P(B − λI)P⁻¹

We want to show that this is equivalent to:
A − λI = Q(B − λI)Q⁻¹
for some invertible matrix Q.

To do this, let's try to manipulate the equation we have into the form we want:

A − λI = P(B − λI)P⁻¹
A − λI = PBP⁻¹ − λP(P⁻¹)
A − λI = PBP⁻¹ − λI
A = PB(P⁻¹) + λI

Now, let's try to get this into the form we want:

A = Q(B − λI)Q⁻¹
A = QBQ⁻¹ − λQ(Q⁻¹)
A = QBQ⁻¹ − λI
A = QB(Q⁻¹) + λI

Comparing the two equations, we see that if we let Q = P, we get the equation we want:

A − λI = PBP⁻¹ − λI
A − λI = QBQ⁻¹ − λI
Thus, A − λI and B − λI are similar.

(b) We want to show that det(A − λI) = det(B − λI).
From part (a), we know that A − λI and B − λI are similar, so there exists an invertible matrix P such that A − λI = P(B − λI)P⁻¹.
Now, let's take the determinant of both sides:
det(A − λI) = det(P(B − λI)P⁻¹)
det(A − λI) = det(P)det(B − λI)det(P⁻¹)
det(A − λI) = det(B − λI)
since det(P) and det(P⁻¹) cancel out.

Therefore, det(A − λI) = det(B − λI).

To learn more about “matrices” refer to the https://brainly.com/question/11989522

#SPJ11

To find the derivative of [tex]f(x) = x^4ex^3[/tex], we can use the chain rule and product rule. Let u =[tex]x^3,[/tex] then f(x) can be written as [tex]u^4e^u[/tex]. The final answer is [tex]\frac{d}{dx}[/tex]  = [tex]0 and d^10/dx^10(x^4 e^x^3)|_x=0 = 24[/tex].

Then we have:

[tex]f'(x) = d/dx(x^4e^x^3)[/tex]= [tex]d/dx(u^4e^u)[/tex] = [tex](4u^3e^u + u^4e^u(3x^2))|_x=0[/tex]

[tex]f'(0) = (4(0)^3e^(0) + (0)^4e^(0)(3(0)^2)) = 0[/tex]

To find the 10th derivative of f(x), we can apply the product rule and chain rule multiple times. We have:

[tex]f(x) = x^4ex^3[/tex]

[tex]f'(x) = 4x^3ex^3 + 3x^4ex^3[/tex]

[tex]f''(x) = 12x^2ex^3 + 12x^4ex^3 + 9x^4ex^3[/tex]

[tex]f'''(x) = 24xex^3 + 36x^3ex^3 + 36x^5ex^3 + 27x^4ex^3[/tex]

[tex]f''''(x) = 24ex^3 + 108x^2ex^3 + 144x^4ex^3 + 108x^6ex^3 + 81x^4ex^3[/tex]

By observing this pattern, we can see that the 10th derivative of f(x) can be written as:

[tex]f^(10)(x) = 24e^x^3 + 216x^2e^x^3 + 720x^4e^x^3 + 1080x^6e^x^3 + 810x^8e^x^3 + 324x^10e^x^3 + 45x^12e^x^3[/tex]

Thus, we have:

[tex]f^(10)(0) = 24e^(0) + 216(0)^2e^(0) + 720(0)^4e^(0) + 1080(0)^6e^(0) + 810(0)^8e^(0) + 324(0)^10e^(0) + 45(0)^12e^(0) = 24[/tex]

To learn more about derivative, visit here

https://brainly.com/question/30365299

#SPJ4

Answer:

There are 16 girls.

Step-by-step explanation:

3 : 4

12 : x

Now if we cross multiply:

3(x) = 12(4)

3x = 48

x = 16

The area of the blue glass is 400x² - 6400πx².

We have,

The area of the square window is:

A = (20x)² = 400x²

The area of the green glass circle is given as:

A_g = 64πr²

However, we need to find the radius of the circle in terms of x.

Since the circle is inscribed in the square, its diameter is equal to the side length of the square:

d = 20x

r = d/2 = 10x

Substituting this value for r in the expression for A_g:

A_g = 64π(10x)² = 6400πx²

The area of the blue glass is the difference between the area of the square and the area of the green glass circle:

A_b = A - A_g = 400x² - 6400πx²

Thus,

The area of the blue glass is 400x² - 6400πx².

Learn more about squares here:

https://brainly.com/question/22964077

#SPJ1

The area of the blue glass is 400x² - 6400πx².

We have,

The area of the square window is:

A = (20x)² = 400x²

The area of the green glass circle is given as:

A_g = 64πr²

However, we need to find the radius of the circle in terms of x.

Since the circle is inscribed in the square, its diameter is equal to the side length of the square:

d = 20x

r = d/2 = 10x

Substituting this value for r in the expression for A_g:

A_g = 64π(10x)² = 6400πx²

The area of the blue glass is the difference between the area of the square and the area of the green glass circle:

A_b = A - A_g = 400x² - 6400πx²

Thus,

The area of the blue glass is 400x² - 6400πx².

Learn more about squares here:

https://brainly.com/question/22964077

#SPJ1

the new equation of the translated function is g(x) = 3x² + 24x + 45.

what is  translated function ?

A translated function is a function that has been shifted or moved horizontally or vertically on a coordinate plane. This means that the position of the function's graph has been changed without altering the shape of the function itself.

In the given question,

To translate a function 4 units left and 6 units down, we need to apply the following transformations to the function f(x):

Shift left 4 units: Replace x with x+4

Shift down 6 units: Subtract 6 from the function value

Therefore, the new equation of the translated function, let's call it g(x), can be found by:

g(x) = f(x+4) - 6

where f(x) = 3x² + 3 is the original equation of the function.

Substituting f(x) into this equation, we get:

g(x) = 3(x+4)² + 3 - 6

Simplifying this expression, we get:

g(x) = 3(x² + 8x + 16) - 3

g(x) = 3x² + 24x + 45

Therefore, the new equation of the translated function is g(x) = 3x² + 24x + 45.

To know more about translated function , visit:

https://brainly.com/question/29198392

#SPJ1

answer: $650

To find how much Kendra paid per foot, we can divide the total cost of the fencing by the length of the fencing.

The length of the fencing is given as 50 feet.

The total cost of the fencing can be found by multiplying the cost per foot by the length of the fencing:

Total cost = Cost per foot x Length of fencing Total cost = $13/ft x 50 ft Total cost = $650

Therefore, Kendra paid a total of $650 for 50 feet of fencing. To find how much she paid per foot, we can divide the total cost by the length of the fencing:

Cost per foot = Total cost / Length of fencing Cost per foot = $650 / 50 ft Cost per foot = $13/ft

So Kendra paid $13 per foot of fencing.

We can use trigonometry to solve this problem. Let x be the distance from the wall to the base of the ladder. Then we have:

tan(64°) = opposite / adjacent

tan(64°) = 8.5 / x

Multiplying both sides by x, we get:

x * tan(64°) = 8.5

Dividing both sides by tan(64°), we get:

x = 8.5 / tan(64°)

Using a calculator, we find that x is approximately 5.3 feet.

Therefore, the base of the ladder is approximately 5.3 feet away from the wall. Rounded to the nearest tenth, this is 5.3 feet.

[tex]\huge{\colorbox{black}{\textcolor{lime}{\textsf{\textbf{I\:hope\:this\:helps\:!}}}}}[/tex]

[tex]\begin{align}\colorbox{black}{\textcolor{white}{\underline{\underline{\sf{Please\: mark\: as\: brillinest !}}}}}\end{align}[/tex]

[tex]\textcolor{blue}{\small\texttt{If you have any further questions,}}[/tex] [tex]\textcolor{blue}{\small{\texttt{feel free to ask!}}}[/tex]

♥️ [tex]{\underline{\underline{\texttt{\large{\color{hotpink}{Sumit\:\:Roy\:\:(:\:\:}}}}}}\\[/tex]

For a nine executives in a business firm, which consists three are married, four have never married, and two are divorce, then the joint probability function of Y₁ and Y₂ is equals to the 0.6.

We have nine executives in a business firm. Let us consider two events

Y₁ --> denote the number of married executives

Y₂ --> denote the number of never-married executives among the three selected for promotion.

Three of the executives are to be randomly selected for promotion from the nine available. Total possible outcomes= 9

We have to determine the joint probability function of Y₁ and Y₂, P( Y₁/ Y₂) = 18/( 12+ 18)

= 18/30 = 0.6

Hence, required probability function value is 0.6.

For more information about joint probability function, refer:

https://brainly.com/question/31454181

#SPJ4

Yes, {A0, A1, A2, A3} it is a partition of the set Z.

Yes, {A0, A1, A2, A3} is a partition of the set Z, which consists of all integers. To explain why this is a partition, let's consider the definition of a partition and examine each subset:

A partition of a set is a collection of non-empty, disjoint subsets that together contain all the elements of the original set. In this case, we need to show that A0, A1, A2, and A3 are non-empty, disjoint, and together contain all integers.

1. Non-empty: Each subset Ai (i=0,1,2,3) contains integers based on the value of k. For example, A0 contains all multiples of 4, A1 contains all numbers 1 more than a multiple of 4, and so on. Since there are integers that fit these criteria, each subset is non-empty.

2. Disjoint: The subsets are disjoint because each integer n can only belong to one subset. If n = 4k, it cannot also be 4k + 1, 4k + 2, or 4k + 3 for the same integer k. Similarly, if n = 4k + 1, it cannot also be 4k, 4k + 2, or 4k + 3, and so on for A2 and A3.

3. Contains all integers: Any integer n can be expressed as 4k, 4k + 1, 4k + 2, or 4k + 3 for some integer k. This covers all possible integers in Z. For example, if n is divisible by 4, it belongs to A0; if it has a remainder of 1 when divided by 4, it belongs to A1; and so on.

Therefore, since {A0, A1, A2, A3} satisfies all the conditions for a partition, it is a partition of the set Z.

Learn more about partition of a set

brainly.com/question/30249529

#SPJ11

Boundary value analysis is a testing technique used to identify defects or issues at the boundaries or limits of input values. True, in boundary value analysis both valid and invalid inputs are tested to verify potential issues.

Boundary value analysis is a testing technique used to identify defects or issues at the boundaries or limits of input values. The main idea is to test inputs that are just above, just below, and exactly at the specified boundaries or limits. This helps in uncovering potential issues that may arise due to boundary conditions.

Valid inputs are those that fall within the acceptable range of values, while invalid inputs are those that fall outside the acceptable range of values. Both valid and invalid inputs are tested during boundary value analysis to ensure thorough testing of the system under test. By testing valid inputs, we can verify if the system handles inputs within the acceptable range correctly. By testing invalid inputs, we can identify any issues or defects that may arise when inputs fall outside the acceptable range.

Therefore, in boundary value analysis, both valid and invalid inputs are tested to verify potential issues or defects in the system

To learn more about Boundary value here:

brainly.com/question/30267084#

#SPJ11

b. True

In an independent-measures t-test, if the sample variances are very large, it is possible to obtain a significant difference between treatments even if the actual mean difference is very small. This is because a larger variance can lead to a larger t-value, which can be considered statistically significant.

FOR MORE INFORMATION ON variances SEE:

https://brainly.com/question/14116780

#SPJ11

Answer:

$24

Step-by-step explanation:

im assuming that height is 4 since thats what it looks like...

surface area of 1 box (wrapping for 1 box): 2*[(14*8)+(14*4)+(8*4)] = 400 square inches

Surface area of 3 boxes(wrapping for 3 boxes): 400*3 = 1200 square inches

cost: 1200 * 0.02 = 24

Answer:

$24

Step-by-step explanation:

Dimensions: 14 x 8 x 4

It's asking what the cost is if you cover 3 boxes, not the volume, so we have to find the surface area of 1 box then multiply it by 3, then multiply by 0.02

The formula for a rectangular prism is:

2(wl+hl+hw)

2((8x14)+(4x14)+(4x8)

=400

Now, there are 3 boxes, so 400x3 = 1,200

1,200 x 0.02 = 24

So, it will cost $24 to cover 3 shoe boxes, hope this helps :)