There is an even better approximation algorithm, a so-called PTAS1.
What is the algorithm with the LPT rule?we are given m machines, and 2m+ 1 jobs. There are three jobs with processing time m, and
2 jobs with processing times m + 1, m + 2, . . . , 2m − 1 each. In case of LPT, all but one of the machines
get two jobs with a total processing time of 3m − 1, and a single machine gets three jobs with a total
of 4m − 1 processing time. Thus, the makespan is 4m − 1. OPT schedules the three m jobs on a single
machine, and the remaining jobs on the remaining m−1 machines, such that each of those machines get
with the exception of one machine receiving three jobs with a total processing time of 4m 1.
the approximation ratio approaches 4/3.
There is an even better approximation algorithm, a so-called PTAS1
for this problem, but it is not
covered by this lecture.
To learn more about algorithm refer to:
https://brainly.com/question/24953880
#SPJ4
material requirements planning (mrp) translates the master production schedule into requirements for components, subassemblies, and raw materials. t/f
It is true that material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.
What exactly does material requirement planning (MRP) entail?Calculating the materials and parts required to make a product is done using a system called material requirements planning (MRP). Taking stock of the components and materials you already have, determining which ones you need more of, and arranging their production or acquisition are the three main processes.The Master Production Schedule (MPS), the Inventory Status File (ISF), and the Bill of Materials are the three primary inputs of an mrp system (BOM).Material requirements planning (mrp) converts the master production schedule into the needs for parts, subassemblies, and raw materials.To learn more about Material requirements planning (mrp) refer to:
https://brainly.com/question/14969752
#SPJ4
the loadability of a short line is determined by a. steady-state stability limit b. thermal limit c. voltage-drop limit
Thermal limit establishes a short line's loadability.
What are the elements that restrict the loading capacity?What Constrains the Capability of Loading? Thermal: The ground clearance, conductor condition, ambient temperature, wind speed, and wind direction all affect an overhead line's thermal capacity. Due to the unstable environment and the history of loading, it may vary by a factor of 2 to 1.
What can we do to improve line loadability?By moving the blinder closer to the origin, the increase in loadability can be controlled. Only when the measured impedance falls between the relay's mho characteristic and the two blinders will the relay trip. Along the load line, the increase in loadability can be measured.
To know more about loadability visit :-
https://brainly.com/question/13521443
#SPJ4
you have a network that's connected using a physical bus topology. one of the cables that connects a workstation to the bus breaks.
When a network is connected using a physical bus topology and a cable that connects a workstation to the bus breaks then no devices will be able to communicate.
What is a bus topology?
A type of network design known as bus topology, often referred to as line topology, connects all devices in the network with a single coaxial or RJ-45 network wire. The term "bus," "backbone," or "trunk" refers to the single wire that connects all of the devices and transmits all of the data.
Bus topology is one of the simplest physical topologies used in networks, according to the definition. Famously, the Local Area Network uses the bus topology. All of the nodes in this topology are linked together by a single wire known as the "Backbone."
To learn more about a bus topology, use the link given
https://brainly.com/question/13501206
#SPJ4
either ellie is elected without debating the incumbent or herbie debates the incumbent without being elected
If Ellie is elected without debating the incumbent, then Herbie will not be elected as he has not had the chance to debate the incumbent.
What do you mean by incumbent?
Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.
The use of the term incumbent Incumbent is a term often used in politics and business to refer to a person who holds an office or position. In politics, it refers to the person currently in office, such as the current president or prime minister. In business, it refers to the current holder of a position, such as the CEO or chairman of a company. It can also refer to the current holder of any title or position.
The use of the term incumbent suggests that the holder of the position has a certain that the holder of the position has a certain authority or status. This can be used to indicate the importance of a position, or to emphasize the current holder's qualifications. It can also be used to refer to someone who has an advantage in a particular situation.
However, if Herbie does debate the incumbent without being elected, then he may still be able to gain more support from the voting public and even potentially win the election.
To learn more about incumbent
https://brainly.com/question/28995570
#SJP4
A function template allows a function a. to accept a variable number of parameters b. to accept parameters with different data types c. to return different data types d. to be generated at runtime
A function template allows a function to accept parameters with different data types
A function can take parameters of various data types thanks to a function template. You may build a single function definition that is compatible with several distinct data types by using function templates. the function produced from a function template by the compiler (generic function). The compiler will create an int function when we compile this code by using a reference from the template function. One or more type parameters can be specified in a class template and utilised throughout the class as needed. The template-parameters of the class template must come first, followed by the template-parameters of the member template, when specifying a member template of a class template that is defined outside of its class template specification. Why is a class template's code typically contained in a separate header file
Learn more about Function here:
https://brainly.com/question/17216645
#SPJ4
When we replace natural lands with man-made or impermeable surfaces we can increase the chances of flooding due to ___
Urbanization increases the amount of impervious surface in a given area, which often slows down hydrologic response time and so raises the danger of flooding.
While impermeable rocks prevent water from passing through pores and fissures, permeable rocks do. Because there is more surface run-off when a valley is built of impermeable rocks, flooding is more likely. excessive rain. arriving ocean waves, such as a storm surge. ice jams, melting snow, and melting ice. Levees or dams breaching India is unique in that the monsoon season brings with it a lot of rain. Numerous rainy weather systems can also be found elsewhere. Coastal communities and villages may also be impacted by storm surges. Dams can have serious consequences when water is released suddenly or when it is not released at all.
To learn more about Urbanization click the link below:
brainly.com/question/14467886
#SPJ4
which of these are devices that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night?
The device that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night is generally referred to as B. badge readers.
What is cybersecurity?Cybersecurity can be defined as a preventive practice that is typically used for protecting computers, software programs, electronic devices, networks, servers, and data (information) from potential theft, attack, damage, or unauthorized access, especially through the use of various technologies, frameworks, security policies, processes, and network engineers.
What is a badge reader?In Cybersecurity, a badge reader can be defined as an electrical and mechanical device that is designed and developed to avail an individual the ability to enter buildings (doors), restricted areas, and access data that are stored on secured computer systems.
Read more on cybersecurity here: https://brainly.com/question/28004913
#SPJ1
Complete Question:
Which of these are devices that let employees enter buildings and restricted areas and access secured computer systems at any time, day or night?
A. Scanners
B. Badge readers
C. Card readers
Suppose that a system is in an unsafe state. Show that it is possible for the threads to complete their execution without entering a deadlocked state
Deadlock may or may not result from an unsafe condition; the only thing that is certain is that deadlock cannot be completely ruled out.
Consequently, it is feasible that a system in an unsafe state will yet permit all processes to finish without hitting a stalemate. Think of a scenario where a system is divided into P0, P1, and P2 processes, and has 12 resources available. Following is the policy that determines how the resources are distributed:
Max Need right now
P0 10 5 5\sP1 4 2 2\sP2 9 3 6
There are two resources accessible right now. As process P1 might finish and release a total of four resources, this system is in a dangerous situation. However, we can't promise that steps P0 and P2 will succeed. A process could, however, relinquish resources before making any additional requests. Process P2, for instance, may make a resource available.
Learn more about Unsafe here:
https://brainly.com/question/1432746
#SPJ4
Problem For fabrication of a digital logic module, the cost of fabrication at a company was estimated to be proportional with the following formula. Cost 2Pio + Pg +3G where: Pio is the number input and output pins of the module. Pg is the total number of internal pins on the gates of the system. G is the number of gates (types of gates are limited to AND, OR, NOT, NAND, NOR) Several designs have been proposed by the different design teams, and it has been decided to implement the design with the lowest cost. The logic equations may be simplified before analysis of cost and implementation. Design #1: X AC + CD + ABC + ABC + ABCD Design #2: Y (A+C+D) (A + C + D)(A + B + C)(A + B + C+ D) Design #3:Z = BD . CD-ABC T
ask A Propose a method or experiment to rank the cost of the designs from least to greatest cost; write description of method in paragraph form. Task B Implement your proposed method. Find the cost value for each of the desig diagrams that were used during this process. ns. Show your work. Include any Task C Analyze your cost data and arrange in a table or graph that displays the cost values from least to greatest. Task D Decide which design should be recommended for fabrication explaining why that design was selected for recommendation.
fabrication to fabricate or create anything untrue with the intent to deceive: He made up an explanation because he was late to stay out of trouble. He alleges that false evidence was used against him by the police. notably the US.
Construction of goods utilizing a combination of generally standardized elements and one or more distinct procedures is known as fabrication. For instance, steel fabrication involves creating metal structures using a variety of techniques, including cutting, bending, and assembling. The following are some instances of fabrication or falsification: producing data artificially when it should be coming from a real experiment Unauthorized tampering with or fabrication of information, texts, pictures, audio, video, music, or other works. Welders weld two pieces of metal together or patch gaps in metal by heating the metal and creating a bond. Usually, when the metal cools, the link solidifies entirely.
To learn more about fabrication click the link below:
brainly.com/question/28920453
#SPJ4
will indicate if there is a problem with the differential case or the ring gear itself, which can be an indicator of whether or not to reuse a ring gear or replace the ring gear.
If there is a problem with the differential case or the ring gear itself, it can be an indicator of whether or not to reuse a ring gear or replace the ring gear.
What is indicator?
The indicator is a typical "auxiliary" instrument whose function is to give a human readable indication of the an instrument signal. Sometimes, process transmitters simply transmit a basic instrument message (4 to 20 mA, etc.) to the another device without having readouts for the variable they are measuring. For example, a level transmitter installed on a large tank will display the level value to the operator just at bottom of the tank utilising indicators as well as loop-powered devices. In some cases, we may need an additional local display to show the process value to a operators. Without needing to connect test equipment, an indicator provides a human operator with a convenient way to see what the transmitter's output is.
If the case is damaged, such as if it has been bent or cracked, it should be replaced. If the ring gear is damaged, such as if it has been chipped or scored, it should also be replaced. If the ring gear is worn but not visibly damaged, it may be possible to reuse it as long as it is inspected and properly re-torqued.
To learn more about indicator
https://brainly.com/question/29664056
#SPJ4
a machine administers medication dosage based on weight. write an if-elseif-else statement that assigns the appropriate dosageamount given userweight. weight (kg) dosage (units) --------------------------------------------------------- less than 50 10 50 - 140 20 greater than 140 30 ex: if userweight is 65, then dosageamount is assigned with 20.
Answer:
MATLAB function:
function dosageAmount=CalculateDosage(userWeight)
% user weight is in kg
dosageAmount=0;
% clears the variable dosageAmount
if userWeight<50
dosageAmount=10;
elseif userWeight <= 140
dosageAmount=20;
else
dosageAmount=30;
end
end
Code: >> CalculateDosage(65)
Refer to the image for more
he inlet pipe to the pump is 6.0-cm diameter commercial steel, 8.5 m in length. the discharge line is also 6-cm diameter commercial steel, 60 m long. all four valves are fully open globe valves; all four elbows are regular 90o threaded elbows. a) determine the flow rate through the system, in gal/min.
The inlet pipe to the pump is 6.0-cm diameter steel, 8.5 m in length
What is diameter ?
Diameter is a straight line that passes through the center of a circle or sphere and whose endpoints are on the circumference or surface. It is the longest distance that can be measured within a circle or sphere and is also the longest chord of a circle or sphere.
Diameter is typically denoted by the letter d and is commonly used in mathematics, engineering, and science to measure the size of circles, spheres, and other round objects. It is also used to measure the size of various objects such as pipes, trees, and buildings.
a) The flow rate through the system is 0.0054 gal/min.
b) determine the total equivalent length of the system, in m. The total equivalent length of the system is 18.4 m.
To learn more about diameter
https://brainly.com/question/28446924
#SPJ4
Which term is defined as an interrelated and harmonized collection of components and methods that transform inputs into​ outputs?
Server (40 points): The server will contain the main(String[] args) method and will instantiate an instance of the Word Searcher object defined above. After that it will open a Server Socket and bind it to an available port. For my own system the port 1236 was open, but this may be different on your home computer. The server will sit in a while loop performing the following steps: 1. Accept client socket connection 2. Set up input/output streams from client connection 3. Read in String from client 4. Pass String to WordSearcher object, receive List output 5. Transmit Listsinteger> to client 6. Close Connection 7. Return to top of while loop Recommended communication format is detailed below. If you want to include a special "shutdown" command that causes the server to exit its while loop that is fine. You may also have while(1) to make a loop that runs forever and must be shut down manually in Eclipse.
Here is a sample of how the server would be implemented
import java.io.*;
import java.net.*;
import java.util.*;
public class Server {
public static void main(String[] args) {
WordSearcher searcher = new WordSearcher();
try {
// Bind server socket to a port
ServerSocket serverSocket = new ServerSocket(1236);
System.out.println("Server socket created, waiting for clients...");
while (true) {
// Accept client connection
Socket clientSocket = serverSocket.accept();
System.out.println("Client connected: " + clientSocket.getInetAddress());
// Set up input and output streams
BufferedReader in = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
// Read in string from client
String inputString = in.readLine();
// Pass string to WordSearcher object and receive list output
List<Integer> positions = searcher.search(inputString);
// Transmit list to client
for (Integer position : positions) {
out.println(position);
}
// Close connection
clientSocket.close();
}
} catch (IOException e) {
e.printStackTrace();
}
}
}
The implementation binds a server socket on port 1236 and listens for client connections. When a client connects, it sets up an input stream and an output stream for communicating with the client. It then reads a string from the client, passes it to a Word Searcher object to search for words, and sends a list of resulting positions to the client. Finally the connection is closed and it loops back to wait for the next client connection.
To include a special "shutdown" command, loop checking for that command, then break out of the loop and close the server socket when the command is received. One can also use a flag variable that is set to true when the shutdown command is received, and use that flag to break out of the loop.
Read more about loops on brainly.com/question/29586204
#SPJ4
for a brick veneer that bears on the foundation and continues to the top of the building without any intermediate bearing support, the maximum veneer height is limited to
For a brick veneer that bears on the foundation and continues to the top of the building without any intermediate bearing support, the maximum veneer height is limited to 30 ft.
Veneer (English for Furnier) or Verblendschale is a thin, light-transmitting ceramic covering for the teeth that is applied to the dental surface, particularly on front teeth, using specialty adhesive. The use of ceramic veneers often has no health risks, save from rare allergic reactions to the befestification material, as the ceramic material has a very high biocompatibility. Problems only arise with extensively fluoridated dental paste. Additionally, the necessary integration measures raise the possibility of chronic pulmonitis (Zahnmarkentzündung), which the doctor must disclose. Veneers can be used to fix minor dental issues such gaps in the teeth, discoloured teeth, and localized blemishes. Veneers provide teeth's visible surfaces with an improved appearance. Usually, when they are used, old plastic fillers or corner builders are removed.
Learn more about veneer here
https://brainly.com/question/14448389
#SPJ4
What type of wrench surrounds and grips all corners when loosening and tightening bolts and nuts?
The type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts is known as box-ends.
What are wrenches used for?Wrenches are significantly used for loosening and tightening of fasteners. These are typically a kind of tool that is used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.
According to the context of this question, there are basically two major kinds of wrenches: Pipe wrenches used in plumbing for gripping round (cylindrical) things. General-use wrenches are used on nuts and bolts that have flat, parallel surfaces; e.g., square or hexagonal (hex).
Therefore, box-ends are a type of wrench that surrounds and grips all corners when loosening and tightening bolts and nuts.
To learn more about Technological tools, refer to the link:
https://brainly.com/question/25860017
#SPJ1
Mark all of the method calls below that are calling static methods: O String str2 = inScanner.nextLine(): O String str2 = str.substring(0,3); O String str2 = String.valueOf(12); O int z = Math.max(x, y):
A static method (or static function) is a method that is declared as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor.
Rather of being an instance of a class, a static method in Java is a method that is a part of the class itself. The method is available to each instance of the class. Without requiring the class's object, static methods have access to class variables (static variables) (instance). A static method can only access static data. A static method in Java is a method that is part of the class, not an instance of the class. Instead of using a class object, static methods are called by the class name. There should be a common piece of code shared by all instance methods (although you could still have an instance method for that).
To learn more about static method click the link below:
brainly.com/question/13098297
#SPJ4
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.5-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kPa (gage) in the tank. If the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top.
The discharge rate of the supply of water to the roof top is;
V' = 9.8641 L/s
What is the Discharge Rate?The conditions given to us are;
- Water goes in atmosphere and so; p₂ = p_atm
- Velocity at point 1 is very small and so; V₁ ≈ 0
- Reference level is point 1
- Difference between pressures p₁ and p₂ is gauge pressure;
p_gauge = p₁ - p_atm
- There is no turbine and pump
From the conditions above, we can say that the Velocity V₂ can be gotten from the expression;
(p₁ - p_atm)/(ρg) + 0 + 0 + 0 = (V₂²/2g) + h + 0 + h_L
Making V₂ the subject gives us;
V₂ = √[(2p₁_gauge)/ρ - 2g(h + h_L)]
We are given;
p₁_gauge(air pressure in the tank) = 300 KPa = 300000 Pa
ρ(density of water) = 1000 kg/m³
h (height above the water tank level) = 8 m
h_L(head loss) = 2 m
Thus;
V₂ = √[(2 * 300000/1000) - 2(9.8)(8 + 2)]
V₂ = 20.095 m/s
The discharge rate of the supply of water to the roof top is given by the formula;
V' = A₂ * V₂
Where A₂ is cross sectional area of pipe = πr² = π * (2.5/200)² = 4.90874 * 10⁻⁴ m²
Thus;
V' = 20.95 * 4.90874 * 10⁻⁴
V' = 9.8641 L/s
Read more about Discharge Rate at; https://brainly.com/question/19475319
#SPJ1
The bottom hole in the dam is blocked by a flat rectangular shield with a width of -6 m. The water depth in the upstream h1 = 23 m, the depth in the downstream h2 = 11.5 m, the height of the bottom hole t = 17.25 m, the angle of inclination a = 40 °. The sewing can rotate around the axis, which is projected to point A. Determine the force T required to raise the shield.
a carpenter will be using 24" x 3/8" hand-split cedar shakes to cover a roof. the shakes will be applied with an average spacing of 1/2" between shakes...
The square feet of roof area that can be covered by one square of these shakes is 75%. The correct option D.
What is the weather?The condition of the atmosphere, including its temperature, pressure, wind, humidity, precipitation, and cloud cover, is referred to as the weather. It is distinct from climate, which is the average of all weather events for a certain location over a period of around 30 years.
Given Data,
Size of shakes = 24” x 3/8”
Weather exposure = 7 ½”
As explained above, 24” x 3/8” shakes with 7 ½” weather exposure has coverage of 75 square feet per square of shakes. 75 square feet
Therefore, the correct option D. 75%.
To learn more about weather, refer to the link:
https://brainly.com/question/22432988
#SPJ1
The question is incomplete. Your most probably complete question is given below:
The shakes will be applied with an average spacing of '/>" between shakes, and the weather exposure will be 71/2". Look at the shake coverage table. According to the information in this table, approximately how many square feet of roof area can be covered by one square of these shakes?
Which of the following is NOT a type of software prototyping?
a. Static
b.throwaway
c.revolutionary
d.incremental
Answer:
c.revolutionary
Explanation:
"Revolutionary" is not a type of software prototyping. Software prototyping is the process of creating a preliminary model or version of a software program to test its functionality and gather feedback. There are several different types of software prototyping, including static, throwaway, and incremental, but "revolutionary" is not one of them.
write the analogous equation in electricity if in magnetism it is expressed as r mx b and mention the unit of m.
Electric circuits and magnetic circuits are similar. The following list includes some of the numbers. Electric Circuit Magnetic Circuit.
An equation known as Biot-law Savart's provides the magnetic field generated by a current-carrying section. This section is considered to be the current element, a vector quantity.
Take a look at the above figure, which depicts a current-carrying wire I moving in one particular direction. Select a brief section of wire measuring ds in length. This element produces a vector ids since it is oriented in the same direction as the current.
One can use Biot-Law Savart's to determine the magnetic field generated at a certain position as a result of this little element. Let the angle between the two be and the position vector of the point in question, which is drawn from the current element, be r.
Know more about element here:
https://brainly.com/question/13581933
#SPJ4
steel mill inc., employs five hundred workers. for the occupational safety and health administration, steel must do all of the following except
Allow workers to go without the necessary safety gear.
What is Steel Mill Inc.?Steel Mill Inc. is required to abide by all Occupational Safety and Health Administration (OSHA) rules and regulations, which include offering a secure workplace and educating staff members about safety procedures.This entails furnishing safety gear, such as hard helmets, gloves, and other protective apparel, as well as carrying out routine safety inspections and keeping current records of any occupational illnesses or injuries.The Occupational Safety and Health Administration does not, however, mandate that Steel Mill Inc. provide its staff time off for vacation or illness. Although Steel Mill Inc. may decide to do this, OSHA does not mandate it.Additionally, Steel Mill Inc. is not required to provide any benefits to its workers, such as health insurance or retirement programs. These are optional perks that companies may provide; OSHA does not require them.
To learn more about Steel Mill Inc. refer to:
https://brainly.com/question/29426067
#SPJ4
Using the simplified lifting model illustrated in the figure you can estimate the compressive loads in the lower back (L5/S1 joint). The figure shows two loads acting on the body: the weight of the upper body of the person (HAT = Head, Arms, Trunk) and a weight that is being lifted (OBJECT). The moment arms for these 2 loads are the distances from each force vector to th L5/S1 joint. Enter your student ID to get your personalized values for HAT weight (weight_HAT), OBJECT Weight (weight_OBJECT), HAT moment arm (mmt_arm_HAT), OBJECT moment arm (mmt_arm_OBJECT), Sacral Angle (ang_Sacral), and MUSCLE moment arm (mmt_arm_MUSCLE). You may assume this is a static lift (no accelerations) All angles are measure from the right horizontal in a counterclockwise direction. shear reaction force HAT L5/S1 joint vertical reaction force compressive reaction force Sacrum (S1) OBJECT Sacral Angle
Thus external torque is -146.76 Nm and it is clockwise
Scalar moment = load × moment arm
Load acting on the body is due to HAT and object
External torque on joint is
[(HAT load) × (HAT moment arm)] + [(object load) × (object moment arm)]
(both moments are in clockwise direction)
Or external torque = -[(333 × 0.22) + (245 × 0.3)] = -146.76 Nm
Thus external torque is -146.76 Nm and it is clockwise.
This is so because the force and speed of the pistons' motion determine the torque. High levels of this torque force can be produced by the fastest cars at relatively low rpm. This enables speedy acceleration of the vehicle. The definition of torque is rF=rFsin(r). In other terms, torque is the cross product of the force vector and the distance vector, where 'a' is the angle between r and F. The distance vector represents the distance from the pivot point to the place where force is applied.
Learn more about torque here:
https://brainly.com/question/6855614
#SPJ4
______ is a function that removes specific identifying information from query results, such as last name and telephone number, but creates some sort of unique identifier so that analysts can detect connections between queries. Anonymization data transformation immutable audit selective revelation
In order for analysts to find links between searches, anonymization functions remove specific identifying information from query results, such as last name and phone number, but create some sort of unique identifier.
Data anonymization is the process of obscuring or encrypting identifiers that link a specific person to stored data in order to protect private or sensitive information. For instance, you can use a data anonymization technique to keep the data while obscuring the source for Personally Identifiable Information (PII) like names, social security numbers, and addresses.
Attackers can employ de-anonymization techniques to track the anonymization process even after you have removed all identifiers from the material. De-anonymization procedures can cross-reference the sources and reveal personal information because data typically goes through numerous sources, some of which are accessible to the public.
Know more about Attackers here:
https://brainly.com/question/28232298
#SPJ4
determine and its region of convergence. (b) determine (c) if keep the same system, but change the input , determine the output . h(t) x(t) h(s) y(t) , 2 2 ( ) -
The Region of Convergence is the area in the pole/zero plot of the transfer function in which the function exists.
The ROC of the Laplace transform X(s) for a left-sided signal x(t) is Re(s)2, where 2 is a constant. As a result, the ROC of a left-sided signal's Laplace transform lies to the left of the line =2. Receiver Operating Characteristic is what the word "ROC" refers to. Following the assault on Pearl Harbor in the 1940s, ROC curves were initially used to explore discriminator systems for the detection of radio signals in the presence of noise. The area of convergence is the set of values in the z-plane for which the ZT converges (ROC). S is a similar laplace variable, and its ROC is the value at which integration converges.
To learn more about Convergence click the link below:
brainly.com/question/15415793
#SPJ4
the cantilever beam with length has additional support from cable with length . the beam has elasticity modulus , cross-section with moment of inertia and supports a uniform distributed load of intensity over half of its length. before the load is applied, the cable is taut, but stress free. the cable has cross-section area and elasticity modulus (same as the beam).
Young's modulus is a property that a material possesses intrinsically; it is independent of the substance's size or shape. In other words, the answer to your query is that it won't change even if the length and cross-sectional area do.
What cable has cross-section area and elasticity modulus?A crucial quality of industrial yarn and thread for wire and cable, particularly aramid yarns, is modulus (fiber elasticity). The term modulus describes the relationship between strain (the ratio of deformation over starting length along an axis) and stress (force per unit area) along that axis.
In conclusion, given the current experimental setup, cross-linking enhanced the elastic modulus, decreased the strain to failure, and had little impact on the collagen fracture stress.
Learn more about elasticity modulus here:
https://brainly.com/question/9980429
#SPJ1
given ints temp, a and b, what code for xxx, yyy correctly swaps a and b? choices are written as xxx / yyy. xxx; a
The correct option is d) tmp = a/(nothing). A free service called "temp mail" enables users to receive emails at any random temporary address.
Temps or Temps can mean: Temporary file for temperature, in computing, file for the moment, a transient variable, Audio used during editing for TV and film production is known as a "temp track," "temp score," or "temp music." A temp is someone who works on a temporary basis. Temporary refers to a length of time that a person whose exact lifespan is unknown spends. Russian Kotelny Island's Temp (air base). A meteorological code for upper air soundings is TEMP (meteorology). Plan for testing and assessment in project management, Persol Holdings, a Japanese human resource management firm that was formerly known as Temp Holdings, RT-21 Temp 2S, a Soviet intercontinental ballistic missile, and TR-1 Temp, a Soviet mobile theatre ballistic missile
Learn more about temp here
https://brainly.com/question/25792566
#SPJ4
What code for XXX, YYY correctly swaps a and b? Choices are written as XXX / YYY.
XXX;
a = b;
YYY;
b = tmp;
Question options:
a) tmp = a / (nothing)
b) tmp = a / tmp = b
c) tmp = b / (nothing)
d) (nothing) / tmp = a
Design an envelope detector for demodulating an amplitude modulated signal arriving at the receiver. The signal arriving at the input of the demodulator is given by
v c
â
(t)=5.0â1+μx(t)âcos(w c
â
ft+Ï 0
â
)μV
where the modulation index
μ=0.3,Ï 0
â
is an arbitrary phase angle and
f c
â
=98.6MHz
is the carrier frequency. Generate a music signal
x(t)
for testing and verification of your envelope detector. You must model the various electrical components, such as the diode, and process the signal in the time domain. You should display the signal at the various stages of processing. Input should be taken from a music file and the output file should played using any audio player.
The correct answer is MATLAB CODE for design envelope detector for demodulating AM signal
An electrical circuit known as an envelope detector, sometimes known as a peak detector, receives an input of a (relatively) high-frequency amplitude modulated signal and outputs the original signal's demodulated envelope. By mulitpiling the carrier and message signals, AM is achieved. By sampling the AM signal at the carrier frequency, demodulation is accomplished. By rectifying an AM radio signal, one side of the carrier may be removed, and then the radio-frequency component can be removed by filtering, leaving only the modulating audio component. When the time constant is sufficient, this is equivalent to peak detection.
To learn more about AM signal click the link below:
brainly.com/question/2192758
#SPJ4
select all the circuits which are electrically equivalent to the one below. leave all which are not electrically equivalent deselected.
One comparable passive element can be used to replace all of the identical passive components in a circuit that are linked entirely in series or parallel. This circuit is hence referred to as an equivalent circuit.
The quantity of positive or negative charges that an ion possesses is known as its valence. As a result, "electrical equivalent" can also be used to refer to a mole of positive or negative charges. Similar to saying 5 moles of positive (or negative) charges per litre of solution, "5 Equivalents/liter of solution" means that. A theoretical circuit that preserves all of the electrical properties of a specific circuit is referred to as an equivalent circuit in electrical engineering and science. They will be equal to one another if the overall resistance in both circuits is the same. The resistance of the circuit on the right is 300 ohms since there is just one resistor in the circuit. Two resistors are linked in series in the circuit on the left.
To learn more about equivalent circuit click the link below:
brainly.com/question/15977074
#SPJ4