The rate limiting step is calcium phosphide, 4.86g of calcium oxide is formed, 1.49g of phosphate is formed and 2.05 g of water is unrected.
How to identify limiting agentIt follows that Calcium Phosphide is the limiting reagent since the ratio of the masses of Calcium Phosphide to those of water is lower in the balanced chemical equation than it is for the provided masses.Ans. b 122 g of calcium phosphate produces 22 g of calcium oxide. Hence, 3.981 g of calcium phosphate will produce 222 /182 3.981 = 4.86 g of calcium oxide.Ans b 122 g of calcium phosphonate yields 68 g of phosphonate; hence, 3.981 g of calcium phosphonate will yield 68 /182 3.981 = 1.49 g of phosphonate.As a result, 182 g of calcium phosphate will react with 108 g of water, resulting in a reaction of 3.981 g of calcium phosphate and 2.36 g of water.So, unreacted water = 4.412 - 2.36 = 2.05 gFor more information on limiting agent kindly visit to
https://brainly.com/question/26943650
#SPJ1
consider a mixture containing equal number of moles of he o2 ch4. determine the multicomponen diffusion coefficients associated with this mixture at 500 k and 1 atm
the multicomponent diffusion coefficients associated with the given mixture at 500 K and 1 atm are: - DHeO2 = 1.36*10^-5 m^2/s ;- DHeCH4 = 1.44*10^-5 m^2/s ;- DO2CH4 = 0.90*10^-5 m^2/s
To determine the multicomponent diffusion coefficients associated with the mixture containing equal number of moles of He, O2, and CH4 at 500 K and 1 atm, we need to use the Stefan-Maxwell equations. These equations describe the flux of each component in a mixture and are based on the molecular weights and diffusion coefficients of each component.
The multicomponent diffusion coefficient (Dij) is defined as the rate at which a component i diffuses relative to a component j. To calculate the Dij values for the given mixture, we can use the following equation:
Dij = (1/P)*[(1/Mi) + (1/Mj)]^0.5 *[(8*k*T)/(π*μij)]
Where P is the pressure of the mixture, Mi and Mj are the molecular weights of components i and j, k is the Boltzmann constant, T is the temperature, and μij is the average viscosity between components i and j.
For the given mixture, we have:
- He: Mi = 4 g/mol
- O2: Mi = 32 g/mol
- CH4: Mi = 16 g/mol
We also need to calculate the average viscosity (μij) between each pair of components. This can be done using the Wilke-Chang equation:
μij = [∑(xi*xj*(Mi+Mj)^0.5)/(∑(xi*Vi^0.5))]^2 * [∑(xi*Vi)/(∑(xi*Vi^0.5))]
Where xi and xj are the mole fractions of components i and j, and Vi is the molar volume of component i.
At 500 K and 1 atm, we can assume ideal gas behavior and use the ideal gas law to calculate the mole fractions of each component:
- He: xi = 1/3
- O2: xi = 1/3
- CH4: xi = 1/3
We also need to calculate the molar volumes of each component at 500 K using the ideal gas law:
- He: Vi = (k*T)/P = (1.38*10^-23 J/K * 500 K)/(1 atm * 1.01325*10^5 Pa/atm) = 2.710*10^-5 m^3/mol
- O2: Vi = (k*T)/P = (1.38*10^-23 J/K * 500 K)/(1 atm * 1.01325*10^5 Pa/atm) = 2.155*10^-5 m^3/mol
- CH4: Vi = (k*T)/P = (1.38*10^-23 J/K * 500 K)/(1 atm * 1.01325*10^5 Pa/atm) = 5.387*10^-5 m^3/mol
Using these values, we can calculate the Dij values for each pair of components:
- DHeO2 = 1.36*10^-5 m^2/s
- DHeCH4 = 1.44*10^-5 m^2/s
- DO2CH4 = 0.90*10^-5 m^2/s
Therefore, the multicomponent diffusion coefficients associated with the given mixture at 500 K and 1 atm are:
- DHeO2 = 1.36*10^-5 m^2/s
- DHeCH4 = 1.44*10^-5 m^2/s
- DO2CH4 = 0.90*10^-5 m^2/s
Note that these values indicate that He and CH4 diffuse faster than O2 in this mixture.
Visit here to learn more about mole fractions : https://brainly.com/question/29808190
#SPJ11
At 25 Celsius does hydrogen or nitrogen have the greater velocity?
Answer:
hydrogen.
Explanation:
Use the standard free energies of formation in Appendix B to calculate the standard cell potential for the reaction in the hydrogen-oxygen fuel cell:
2H2(g)+O2(g)→2H2O(l)
The standard potential for the following galvanic cell is 1.73 V:
Zn(s)|Zn2+(aq)||Pu4+(aq),Pu3+(aq)|Pt(s)
(Plutonium , Pu, is one of the actinide elements.) The standard reduction potential for the Zn2+/Zn half-cell is −0.76 V.
Calculate the standard reduction potential for the Pu4+/Pu3+half-cell.
The driving force of the electron flow from anode to cathode shows a potential drop in the energy of the electrons moving into the wire. The standard cell potential, also known as the electromotive force (emf). Here standard cell potential for the reaction 2H2(g) + O2(g) → 2H2O(g) is -1.48V.
The difference in potential energy between the anode and cathode is defined as the cell potential in a voltaic cell. It is the measure of the potential difference between two half-cells of an electrochemical cell when all reactants and products are present at the standard state.
E°cell = Ecathode - Eanode
E°cell = -0.824 - +0.656 = -1.48 V
To know more about cell potential, visit;
https://brainly.com/question/1313684
#SPJ1
draw the two possible enols that can be formed from 3-methyl-2-butanone:
CH₂=C(OH)CH(CH₃)CH₃ and CH₃C(OH)=CHCH(CH₃)₂ can be formed from 3-methyl-2-butanone.
Step 1: Start with the structure of 3-methyl-2-butanone. It has the formula: CH₃C(O)CH(CH₃)CH₃.
Step 2: Identify the alpha carbons. These are the carbons directly adjacent to the carbonyl carbon (C=O). In this case, there are two alpha carbons: one is bonded to the CH₃ group, and the other is bonded to the CH(CH₃)₂group.
Step 3: Remove a hydrogen from each of the alpha carbons and replace the carbonyl bond (C=O) with a double bond between the alpha carbon and the oxygen (C-OH).
Enol 1: CH₂=C(OH)CH(CH₃)CH₃
Enol 2: CH₃C(OH)=CHCH(CH₃)₂
These are the two possible enols that can be formed from 3-methyl-2-butanone.
To learn more about enol https://brainly.com/question/27749729
#SPJ11
The electrical properties of the Atlantic Ocean are given by , , . Show that it is a conductor up to a frequency of about 10 MHz. What is the longest electromagnetic wavelength you would expect to propagate under water?
The Atlantic Ocean has electrical conductivity due to the presence of dissolved salts, making it a conductor up to a frequency of around 10 MHz.
The longer the wavelength of an electromagnetic wave, the more it interacts with the medium it passes through, leading to attenuation. In water, the longest wavelength that can propagate is around 2000 meters, corresponding to a frequency of 150 kHz.
This is because at longer wavelengths, the water molecules cannot respond quickly enough to the changing electromagnetic field, leading to significant energy loss through absorption and scattering.
Therefore, for underwater communication or sensing applications, frequencies below 10 MHz would be ideal to maximize propagation distance and reduce signal loss.
To know more about electrical conductivity click on below link:
https://brainly.com/question/31668005#
#SPJ11
a buffer contains 0.15 mol of propionic acid (c2h5cooh ka = 1.3 × 10−5) and 0.10 mol of (nac2h5coo) in 1 l. (a) what is the ph of this buffer?
The pH of a buffer containing 0.15 mol of propionic acid and 0.10 mol of sodium propionate in 1 L is approximately 4.59.
To find the pH of the buffer solution containing 0.15 mol of propionic acid (C₂H₅COOH, Ka = 1.3 × 10⁻⁵) and 0.10 mol of sodium propionate (NaC₂H₅COO) in 1 L, you can use the Henderson-Hasselbalch equation:
pH = pKa + log ([A⁻] / [HA])
Here, pKa = -log(Ka) and [A⁻] is the concentration of the conjugate base (sodium propionate), and [HA] is the concentration of the weak acid (propionic acid).
First, let's calculate the pKa:
pKa = -log(1.3 × 10⁻⁵) ≈ 4.89
Now, plug in the concentrations of the weak acid and its conjugate base:
pH = 4.89 + log(0.10 / 0.15)
pH = 4.89 + log(2/3) ≈ 4.59
Therefore, the pH of the buffer solution is approximately 4.59.
Learn more about Henderson-Hasselbalch equation here: https://brainly.com/question/26746644
#SPJ11
Draw the major organic products of this reaction, showing any nonzero formal charges. Then answer the question that follows.
1. NaOH 2. CH3CH2Br 3. H30, heat NH
There are two parts to this question. Both are required.
Draw the product with the higher molecular weight here:
Draw the product with the lower molecular weight here:
The products of the given SN2 reaction are ethyl alcohol (CH3CH2OH) and bromide ion (Br-). Ethanol has a higher molecular weight of 46 g/mol compared to the lower molecular weight of Br- which is 80 g/mol.
The given reaction is an SN2 reaction between ethyl bromide (CH3CH2Br) and hydroxide ion (OH-) followed by protonation with H3O+ under heat. The mechanism and products are:
Step 1: The nucleophilic OH- attacks the electrophilic carbon of the ethyl bromide to displace the bromide ion and form the intermediate alkoxide.
CH3CH2Br + NaOH → CH3CH2O- Na+ + Br-
Step 2: The alkoxide ion is protonated by the acidic H3O+ to give the alcohol product.
CH3CH2O- + H3O+ → CH3CH2OH + H2O
The product with the higher molecular weight is CH3CH2OH (ethanol) with a molecular weight of 46 g/mol. The product with the lower molecular weight is Br- with a molecular weight of 80 g/mol.
Therefore, the answer is:
Draw the product with the higher molecular weight here: CH3CH2OH
Draw the product with the lower molecular weight here: Br-
learn more about ethyl alcohol here:
https://brainly.com/question/29153788
#SPJ11
write out symbolic solution aluminum temperature as a function of time
"T(t) = T0 + (Q/k) * t" this equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
To write out a symbolic solution for the temperature of aluminum as a function of time, we can use the following terms:
- T(t): temperature of aluminum at time t
- T0: initial temperature of aluminum
- k: thermal conductivity of aluminum
- t: time
- Q: heat transferred
The temperature of aluminum as a function of time can be represented using the heat equation. In a simplified form, the equation can be written as:
T(t) = T0 + (Q/k) * t
This equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
Visit here to learn more about thermal conductivity : https://brainly.com/question/23897839
#SPJ11
"T(t) = T0 + (Q/k) * t" this equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
To write out a symbolic solution for the temperature of aluminum as a function of time, we can use the following terms:
- T(t): temperature of aluminum at time t
- T0: initial temperature of aluminum
- k: thermal conductivity of aluminum
- t: time
- Q: heat transferred
The temperature of aluminum as a function of time can be represented using the heat equation. In a simplified form, the equation can be written as:
T(t) = T0 + (Q/k) * t
This equation represents the temperature of aluminum (T) at a given time (t) as a function of its initial temperature (T0), heat transferred (Q), and thermal conductivity (k).
Visit here to learn more about thermal conductivity : https://brainly.com/question/23897839
#SPJ11
True or False? the 1h nmr spectrum of this compound −60°c shows a peak at 7.6 ppm, this would indicate aromaticity.
The 1H NMR spectrum of this compound −60°C shows a peak at 7.6 ppm, this would indicate aromaticity - True.
Nuclear magnetic resonance is used in proton nuclear magnetic resonance (proton NMR, hydrogen-1 NMR, or 1H NMR), which uses hydrogen-1 nuclei inside a substance's molecules to determine the structure of those molecules. Almost all of the hydrogen in samples containing natural hydrogen (H) is the isotope 1H (hydrogen-1; that is, hydrogen with a proton for a nucleus).
Solvent protons must not be permitted to obstruct the recording of simple NMR spectra since they are done in solutions. Deuterated solvents, such as deuterated water, D2O, deuterated acetone, (CD3)2CO, deuterated methanol, CD3OD, deuterated dimethyl sulfoxide, (CD3)2SO, and deuterated chloroform, CDCl3, are favoured for use in NMR. Deuterium, or 2H, is typically represented by the letter D. However, a non-hydrogen solvent, such as carbon tetrachloride (CCl4) or carbon disulfide, CS2, may also be used.
Learn more about 1H NMR spectrum:
https://brainly.com/question/30583972
#SPJ4
HCl and zinc are added to the tube in order to detect the presence of O nitrites O nitrous oxide O nitrates
When HCl and zinc are added to a test tube, it is typically done to detect the presence of nitrites (NO₂⁻) in the sample. The reaction between zinc and HCl generates hydrogen gas, which then reduces any nitrites present to form nitrogen gas (N₂). The production of nitrogen gas can be observed as bubbles, indicating the presence of nitrites in the sample.
HCl and zinc are added to the tube in order to detect the presence of nitrites (NO2-). When nitrites are present, they react with HCl and zinc to form a pink color solution, indicating the presence of nitrites. However, HCl and zinc are not effective in detecting the presence of nitrous oxide (N2O) or nitrates (NO3-). Other methods, such as chemiluminescence, are used to detect the presence of these compounds.
When HCl and zinc are added to a test tube, it is typically done to detect the presence of nitrites (NO₂⁻) in the sample. The reaction between zinc and HCl generates hydrogen gas, which then reduces any nitrites present to form nitrogen gas (N₂). The production of nitrogen gas can be observed as bubbles, indicating the presence of nitrites in the sample.
To learn more about nitrites, click here:
brainly.com/question/30466459
#SPJ11
Classify each of the following reactants and products as an acid or base according to the Bronsted theory: hno3 + (ch3)3co (ch3)3coh + no3 HN03 (CH3)3Co (ch3)3coh no3
HNO3 is an acid, (CH3)3CO is a base, (CH3)3COH is a conjugate acid, and NO3^- is a conjugate base according to the Bronsted theory.
According to the Bronsted theory, an acid is a substance that donates a proton (H+) and a base is a substance that accepts a proton (H+). Let's classify each reactant and product in the given reaction: HNO3 + (CH3)3CO ⇌ (CH3)3COH + NO3^-
1. HNO3 (nitric acid): It donates a proton (H+) to the other reactant, so it is an acid according to the Bronsted theory.
2. (CH3)3CO (tert-butoxide ion): It accepts a proton (H+) from HNO3, so it is a base according to the Bronsted theory.
3. (CH3)3COH (tert-butanol): It is formed after the base (CH3)3CO accepts a proton, so it can be considered as the conjugate acid of the base (CH3)3CO.
4. NO3^- (nitrate ion): It is formed after the acid HNO3 donates a proton, so it can be considered as the conjugate base of the acid HNO3.
Learn more about Bronsted theory here, https://brainly.com/question/15516010
#SPJ11
1. For parts of the free response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. Answer the following questions related to CO2. 30-C=0 0=c=0 Diagram X Diagram z (a) Two possible Lewis electron-dot diagrams for CO2 are shown above. Explain in terms of formal charges why diagram 2 is the better diagram. (b) Identify the hybridization of the valence orbitals of the Catom in the CO2 molecule represented in diagram 2 (c) A 0.1931 mol sample of dry ice, CO2(s), is added to an empty balloon. After the balloon is sealed, the CO2(8) sublimes and the CO2(g) in the balloon eventually reaches a temperature of 21.0°C and pressure of 0.998 atm. The physical change is represented by the following equation. CO2(8) + CO2(9) AHyublimation =? (1) What is the sign (positive or negative) of the enthalpy change for the process of sublimation? Justify your answer. (11) List all the numerical values of the quantities, with appropriate units, that are needed to calculate the volume of the balloon. (iii) Calculate the final volume, in liters, of the balloon.
V = Vf Vi = 18 cm3 18000 cm3 = 17982 cm3, for example. Since the volume in the final state is less than the volume in the starting state, the change is negative.
(a) Because K is in the fourth period whereas Na is in the third, K has a substantially higher atomic radius (280 pm vs. 227 pm). K has a bigger size since it has an additional shell.
(b) Because the K+ ion is significantly more stable than the Ca+ ion, the first-ionization energy of K is lower than that of Ca. K has the following electronic configuration: 1s2 2s2 2p6 3s1. The cation achieves the stable structure of a noble gas after losing an electron.
(c) The brittle, ionic compound Na2O also has the formula M2O. This is true because potassium and sodium are both members of the same periodic table group. They are chemically similar since they both have valency+1.
(d) The chemist has the ability to identify the substance in the sample. The chemist can determine the mass of K in the sample using elemental analysis because he is aware of its mass. The ratio of K to O in the sample can then be calculated, and it can be compared to ratios of K2O or K2O2.
To know more about electronic configuration, click here:
https://brainly.com/question/29757010
#SPJ4
Consider the reaction: 2H2O(l)2H2(g) + O2(g) Using standard absolute entropies at 298K, calculate the entropy change for the system when 2.21 moles of H2O(l) react at standard conditions. S°system = ?J/K
The entropy change for the system when 2.21 moles of H2O(l) react at standard conditions is 538.1 J/K.
The entropy change of the system can be calculated using the standard molar entropies of the reactants and products:
ΔS° = ΣnS°(products) - ΣmS°(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and S° is the standard molar entropy.
For the given reaction:
2H2O(l) → 2H2(g) + O2(g)
The standard molar entropies at 298K are:
S°(H2O,l) = 69.91 J/mol·K
S°(H2,g) = 130.68 J/mol·K
S°(O2,g) = 205.03 J/mol·K
Using the equation above, we can calculate the entropy change of the system:
ΔS° = 2 × S°(H2,g) + S°(O2,g) - 2 × S°(H2O,l)
ΔS° = 2 × 130.68 J/mol·K + 205.03 J/mol·K - 2 × 69.91 J/mol·K
ΔS° = 243.57 J/mol·K
The reaction involves the conversion of 2.21 moles of water, so the entropy change for the system will be:
S°system = ΔS° × n = 243.57 J/mol·K × 2.21 mol = 538.1 J/K
learn more about entropy change here:
https://brainly.com/question/30691597
#SPJ11
The equilibrium constant for the gas phase reaction N2(g) + 3H2(g) <---> 2NH3(g) is Keq = 4.34x10^-3 at 300 degrees Celsius. At equilibrium
a) products predominate
b) roughly equal amounts of products and reactants are present
c) only products are present
d) only reactants are present
e) reactants predominate
Okay, let's break this down step-by-step:
The equilibrium constant, Keq, indicates the ratio of products to reactants at equilibrium.
A Keq of 4.34x10^-3 means the products (2NH3) will predominate, but the reactants (N2 and 3H2) will still be present.
So the options are:
a) products predominate - Correct. The products predominate since Keq > 1.
b) roughly equal amounts of products and reactants are present - Incorrect. For Keq = 4.34x10^-3, the amounts of products and reactants will not be equal.
c) only products are present - Incorrect. There will still be some reactants at equilibrium.
d) only reactants are present - Incorrect. There will be some products formed at equilibrium.
e) reactants predominate - Incorrect. The products will predominate.
Therefore, the correct option is:
a) products predominate
Let me know if this makes sense! I can provide more details or explanations if needed.
a)benzoic acid (pka=4.2) and b)phenol (pka=10) is a stronger acid. a)citric acid (pka=3.08) and b)phosphoric acid (pka=2.10) is a stronger acid.
Answer:
Phosphoric Acid
Explanation:
Phosphoric Acid is the strongest acid. The lower the pKa the stronger the acid.
You can justify this by calculating Ka, which Ka = 10^-pKa
The higher the Ka value, the greater the dissociation of the acid, the more hydrogen protons will be formed and the lower the pH making it a stronger acid.
write the electron configuration for an argon cation with a charge of 2
An argon cation with a charge of 2+ has the following electron configuration: 1s2 2s2 2p6 3s2 3p6
The argon cation's current electron configuration shows that it has lost two electrons from its initial state of 1s2 2s2 2p6 3s2 3p6. It has specifically lost the two electrons in its outermost shell, leaving the filled inner shells in place. An atom becomes a positive-charged cation when one or more of its electrons are lost. The argon cation has lost two electrons in this instance, giving it a 2+ charge. The final form resembles the stable noble gas configuration of the element neon. The chemical characteristics of an argon cation with a 2+ charge, which has a decreased affinity for electrons and a greater propensity to interact with other elements in order to recoup electrons and reach a stable configuration, are explained by this configuration.
learn more about electrons here:
https://brainly.com/question/28977387
#SPJ11
Draw all of the expected products for each of the following solvolysis reactions: Get help answering Molecular Drawing questions. X Your answer is incorrect. Try again. (a) Br ? E1OH heat Edit Get help answering Molecular Drawing questions. X Your answer is incorrect. Try again. (b) ? Hо heat CI (c) Br ? МеОн heat Edit Get help answering Molecular Drawing questions. Your answer is incorrect. Try again. (d) CI ? МеОн heat Edit
(a) The solvolysis reaction of Br with E1OH in the presence of heat will result in the formation of two products - 1-bromoethanol and hydrogen bromide (HBr). The molecular drawing of the products is:
CH2OH-CH2Br + HBr
(b) The solvolysis reaction of Cl with H2O in the presence of heat will result in the formation of two products - 2-chloroethanol and hydrogen chloride (HCl). The molecular drawing of the products is:
CH3-CH(OH)-Cl + HCl
(c) The solvolysis reaction of Br with MeOH in the presence of heat will result in the formation of two products - methyl bromide and methanol. The molecular drawing of the products is:
CH3Br + CH3OH
(d) The solvolysis reaction of Cl with MeOH in the presence of heat will result in the formation of two products - methyl chloride and methanol. The molecular drawing of the products is:
CH3Cl + CH3OH
Learn more about solvolysis reaction here:
https://brainly.com/question/21796580
#SPJ11
All of the following statements concerning acid-base buffers are true EXCEPT buffers are resistant to pH changes upon addition of small quantities of strong acids or bases.
Acid-base buffers are solutions that resist changes in pH when small amounts of acids or bases are added. They work by containing a weak acid and its conjugate base or a weak base and its conjugate acid.
When a strong acid or base is added to the buffer solution, the weak acid or base reacts with it to form its conjugate and thus maintains the pH of the solution.
However, the statement "buffers are resistant to pH changes upon addition of small quantities of strong acids or bases" is incorrect. Buffers do resist changes in pH, but only to a certain extent.
When large quantities of strong acids or bases are added to the buffer solution, they can overcome the buffering capacity and cause significant changes in pH.
Therefore, the statement should read, "Buffers are resistant to pH changes upon the addition of moderate quantities of strong acids or bases." It is important to note that the buffering capacity of a solution depends on the concentration and pKa value of the weak acid or base used in the buffer.
To know more about Acid-base buffers refer here:
https://brainly.com/question/24317038#
#SPJ11
efore the first titration is performed you must mix the ascorbic acid powder sample with 1.5 m h2so4and kbr. what role do these reagentsplay in this initial mixing?
The 1.5 M H2SO4 and KBr reagents play a crucial role in the initial mixing of the ascorbic acid powder sample. The H2SO4 serves as a catalyst for the reaction between ascorbic acid and iodine in the subsequent titration process. Additionally, it helps to maintain a low pH, which is necessary for the stability of the iodine.
The KBr is added to help dissolve the iodine that will be used in the titration. Together, these reagents create an ideal environment for accurate and precise titration results.
Hi! In the initial mixing before the first titration, the reagents 1.5 M H2SO4 and KBr play specific roles. H2SO4, a strong acid, helps dissolve the ascorbic acid powder and creates an acidic environment that prevents oxidation of ascorbic acid. KBr acts as a catalyst, promoting the reaction between ascorbic acid and the titrant, leading to a more accurate titration result.
Visit here to learn more about ascorbic acid brainly.com/question/28783204
#SPJ11
Calculate the pH of a solution that is 0.065 M in potassium propionate (C2H5COOK or KC3H5O2) and 0.090 M in propionic acid (C2H5COOH or HC3H5O2).
Calculate the pH of a solution that is 0.070 M in trimethylamine, (CH3)3N, and 0.13 M in trimethylammonium chloride, ((CH3)3NHCl).
Calculate the pH of a solution that is made by mixing 50.0 mL of 0.14 M acetic acid and 50.0 mL of 0.23 M sodium acetate.
The solution has a pH of 5.42. This means that the solution is slightly acidic, with a pH that is lower than 7.0.
The pH of a solution made by mixing 50.0 mL of 0.14 M acetic acid and 50.0 mL of 0.23 M sodium acetate can be calculated by using the Henderson-Hasselbalch equation.
The equation states that pH = pKa + log([salt]/[acid]), where pKa is the acid dissociation constant of acetic acid and [salt] and [acid] are the concentrations of sodium acetate and acetic acid, respectively.
Since the concentration of acetic acid is 0.14 M and the concentration of sodium acetate is 0.23 M, the pH of the solution can be calculated as follows: pH = 4.76 + log(0.23/0.14) = 5.42.
Know more about pH here
https://brainly.com/question/15289741#
#SPJ11
write the formula of three different lewis acids
Answer:
AlCl3 / SO2 / NO2
Explanation:
Lewis acid are species that have lack of electrons
The pH of a 0.25 M solution of HCN is 4.90. Calculate the Kavalue for HCN.a. 6.3 x 10−10b. 1.26 x 10−5c. More information is needed.d. 2.29 x 10−4e. 7.94 x 10 −10
The Ka value for HCN is 6.3 x [tex]10^{-10[/tex] given the pH of a 0.25 M solution of HCN is 4.90. The correct option is a.
To calculate the Ka value for HCN, we first need to determine the concentration of H+ ions using the given pH value. Then, we can set up an equilibrium expression and solve for Ka.
1. Calculate the concentration of H+ ions:
pH = 4.90
[H+] = [tex]10^{(-pH)} = 10^{(-4.90)} = 1.26 * 10^{-5} M[/tex]
2. Set up the equilibrium expression for HCN:
HCN ↔ H+ + CN-
Initial concentration: 0.25 M ----- 0 ----- 0
Change in concentration: -x ----- +x ----- +x
Equilibrium concentration: 0.25-x ----- x ----- x
Since x (concentration of H+) is much smaller than 0.25, we can assume that (0.25 - x) ≈ 0.25.
3. Write the expression for Ka:
Ka = ([H+][CN-])/[HCN] = (x)(x)/(0.25)
4. Solve for Ka:
Ka = (1.26 x[tex]10^{-5[/tex])(1.26 x [tex]10^{-5[/tex])/0.25 ≈ 6.3 x [tex]10^{-10[/tex]
Therefore, the Ka value for HCN is approximately 6.3 x [tex]10^{-10[/tex] (option a).
For more such questions on Ka.
https://brainly.com/question/29006496#
#SPJ11
calculate the concentration of c6h5nh3 c6h5nh3 and cl−cl− in a 0.215 mm c6h5nh3clc6h5nh3cl solution.
The concentration of c6h5nh3 and cl− in the 0.215 mm c6h5nh3clc6h5nh3cl solution is 0.001 mol/L for both. To calculate the concentration of c6h5nh3 and cl− in a 0.215 mm c6h5nh3clc6h5nh3cl solution, we need to use the equation:
concentration = moles of solute / volume of solution
First, we need to determine the moles of c6h5nh3 in the solution:
moles of c6h5nh3 = (0.215 mm) * (1 mol / 1000 mm) = 0.000215 mol
Next, we need to determine the moles of cl− in the solution. Since there is an equal number of moles of cl− as there are moles of c6h5nh3, we can simply use the same value:
moles of cl− = 0.000215 mol
Finally, we can use the same equation to calculate the concentration of c6h5nh3 and cl−:
concentration of c6h5nh3 = 0.000215 mol / 0.215 L = 0.001 mol/L
concentration of cl− = 0.000215 mol / 0.215 L = 0.001 mol/L
Therefore, the concentration of c6h5nh3 and cl− in the 0.215 mm c6h5nh3clc6h5nh3cl solution is 0.001 mol/L for both.
Learn more about concentration here:
https://brainly.com/question/13872928
#SPJ11
When 50 mL (50 g) of 1.00 M HCl at 22 degrees Celsius is added to 50 mL (50 g) of 1.00 M NaOH at 22 degrees Celsius in a coffee cup calorimeter, the temperature increases to 28.87 degrees Celsius. How much heat is produced by the reaction between HCl and NaOH? (The specific heat of the solution produced is 4.18 J/g°C.)
The heat produced by the reaction between HCl and NaOH is 2874.46 Joules.
How to determine the heat produced by reaction?To know how much heat is produced by the reaction between 50 mL (50 g) of 1.00 M HCl at 22 degrees Celsius and 50 mL (50 g) of 1.00 M NaOH at 22 degrees Celsius in a coffee cup calorimeter, given that the temperature increases to 28.87 degrees Celsius and the specific heat of the solution produced is 4.18 J/g°C.
To calculate the heat produced (q) by the reaction, we will use the following formula:
q = mass x specific heat x change in temperature
Step 1: Determine the mass of the solution
The mass of the solution is the sum of the mass of HCl and the mass of NaOH:
mass = 50 g + 50 g = 100 g
Step 2: Determine the change in temperature
The change in temperature is the final temperature minus the initial temperature:
ΔT = 28.87°C - 22°C = 6.87°C
Step 3: Calculate the heat produced
Now, we can use the formula to calculate the heat produced:
q = mass x specific heat x change in temperature
q = 100 g x 4.18 J/g°C x 6.87°C
q = 2874.46 J
To know more about Specific Heat:
https://brainly.com/question/14225113
#SPJ11
A typical polyethylene grocery bag weighs 12.4 g. How many metric tons of CO2 would be released into the atmosphere if the 102 billion bags used in one year in the United States were burned?[1 metric ton = 1000 kg]
Assuming that burning one polyethylene grocery bag releases 0.04 kg of CO2 (as estimated by the EPA), the total amount of CO2 released from burning 102 billion .
bags would be 4.08 billion kg or 4.08 million metric tons (since 1 metric ton = 1000 kg). This calculation assumes that all 102 billion bags are burned and that all the carbon in the bags is converted to CO2 during the combustion process. However, it is important to note that recycling or properly disposing of plastic bags can significantly reduce their environmental impact and prevent the release of greenhouse gases.metric tons of CO2 would be released into the atmosphere if the 102 billion bags used in one year in the United States were burned?[1 metric ton = 1000 kg]
Learn more about CO2 here:
https://brainly.com/question/28870590
#SPJ11
From the GC obtained in today's experiment, please complete the following statements: 1. For the fraction injected in the video to demonstrate the use of the GC, the hexane had a Select ] retention time compared with the toluene peak. 2. The fraction used to demonstrate the use of the GC gave two peaks with short retention time and one peak with longer retention time. The smallest of the short retention time peaks was [ Select ] 3. For the Fraction 1 (the fraction that distilled first), we expect the toluene peak to be the one with [Select] area. 4. For the fraction 3, we expect that the hexane peak would be the one with the [ Select] area. 5. The component with larger Boiling Point will have a [ Select] retention time. 6. Fraction 2 (if it was injected) will show that the peak of hexane would have [Select ] area than the peak of toluene. 7. To assign peaks in a GC one of the factors to consider is the [Select] [ V of the components. The [Select ] the boiling point, the slower will elute and [ Select) the retention time. 8. In a distillation, the [Select] volatile will distill first. While the distillation progresses, the temperature will raise and the [Select ] volatile will distill and
For the fraction injected in the video to demonstrate the use of the GC, the hexane had a shorter retention time compared with the toluene peak.
The fraction used to demonstrate the use of the GC gave two peaks with short retention time and one peak with longer retention time. The smallest of the short retention time peaks was the peak of hydrogen (H₂).
For Fraction 1 (the fraction that distilled first), we expect the toluene peak to be the one with the largest area.
For fraction 3, we expect that the hexane peak would be the one with the largest area.
The component with a larger boiling point will have a longer retention time.
Fraction 2 (if it was injected) will show that the peak of hexane would have a larger area than the peak of toluene.
To assign peaks in a GC, one of the factors to consider is the volatility (V) of the components. The higher the boiling point, the slower it will elute and the longer the retention time.
In a distillation, the more volatile compound will distill first. As the temperature rises, the less volatile compound will then distill.
The GC video showed that hexane had a shorter retention time compared to the toluene peak. Retention time is the time taken for a component to elute from the GC column and reach the detector. Compounds with shorter retention times elute faster and are detected earlier.
The fraction demonstrated in the GC had two peaks with short retention times and one peak with a longer retention time. The smallest of the short retention time peaks was the peak of hydrogen (H₂). Peaks on a GC chromatogram correspond to different compounds or components in the sample.
For Fraction 1 (the fraction that distilled first), the toluene peak is expected to have the largest area since it is the major component in the mixture and is expected to elute first.
For fraction 3, the hexane peak is expected to have the largest area since it is the major component in the fraction and is expected to elute first.
The component with a larger boiling point will have a longer retention time. Boiling point is the temperature at which a liquid turns into a gas. Compounds with higher boiling points will require more energy to turn into gas and will, therefore, take longer to elute from the GC column.
Fraction 2 (if injected) would show that the peak of hexane would have a larger area than the peak of toluene since hexane is the major component in the fraction and is expected to elute first.
To assign peaks in a GC, one of the factors to consider is the volatility (V) of the components. Volatility is the tendency of a compound to evaporate. Compounds with higher boiling points are less volatile and will take longer to elute from the GC column, resulting in longer retention times.
In a distillation, the more volatile compound will distill first. As the temperature of the mixture is raised, the boiling point of the components increases. The less volatile compound will then distill as the temperature continues to rise.
For more questions like Temperature click the link below:
https://brainly.com/question/11464844
#SPJ11
T19. What is the main difference in the degree of electron delocalization between a 4-dimethylamino-4'nitrostilbene and a 4-dimethylamino-3'-nitrostilbene? Draw the relevant resonance contributors.
The main difference in the degree of electron delocalization between a 4-dimethylamino-4'nitrostilbene and a 4-dimethylamino-3'-nitrostilbene is their resonance structure.
In 4-dimethylamino-4'-nitrostilbene, the electron-donating dimethylamino group and electron-withdrawing nitro group are located on opposite ends of the stilbene molecule, both para to the central double bond. This allows for greater resonance stabilization and extended electron delocalization across the entire molecule.
In contrast, in 4-dimethylamino-3'-nitrostilbene, the nitro group is meta to the central double bond. This arrangement disrupts the resonance stabilization, resulting in reduced electron delocalization.
So, the main difference is that the 4-dimethylamino-4'-nitrostilbene has greater electron delocalization due to its para positioning, while the 4-dimethylamino-3'-nitrostilbene has reduced electron delocalization due to its meta positioning.
To know more about electron delocalization:
https://brainly.com/question/28039656
#SPJ11
a buffer solution is 0.341 m in hcn and 0.345 m in nacn . if ka for hcn is 4.0×10-10 , what is the ph of this buffer solution?
The pH of the buffer solution is 9.06.
To solve this problem, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the concentrations of the acid and its conjugate base:
pH = pKa + log([A-]/[HA])
where pKa is the acid dissociation constant, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
In this case, HCN is the acid and CN- is its conjugate base. The dissociation constant for HCN is given as Ka = 4.0×10^-10. The concentrations of HCN and CN- in the buffer solution are 0.341 M and 0.345 M, respectively.
We can first calculate the ratio of [CN-]/[HCN]:
[Cn-]/[HCN] = 0.345/0.341 = 1.017
Next, we can calculate the pKa using the formula:
Ka = [H+][CN-]/[HCN]
Rearranging this equation gives:
pKa = -log(Ka) + log([HCN]/[CN-])
Substituting the values given:
4.0×10^-10 = [H+][0.345]/[0.341]
[H+] = 2.99×10^-5 M
pKa = -log(4.0×10^-10) + log(0.341/0.345) = 9.21
Finally, we can plug in the values of pKa and [CN-]/[HCN] into the Henderson-Hasselbalch equation to solve for the pH:
pH = 9.21 + log(1.017) = 9.06
Therefore, the pH of the buffer solution is 9.06.
Know more about Henderson-Hasselbalch Equation here:
https://brainly.com/question/13423434
#SPJ11
calculate enthalpy change between saturated vapor and superheated steam
To calculate the enthalpy change between saturated vapor and superheated steam, you'll need to know the initial and final temperatures.
As well as the specific heat capacity of steam. The enthalpy change (ΔH) can be calculated using the formula:
ΔH = m × Cp × ΔT
Where:
- ΔH is the enthalpy change
- m is the mass of steam
- Cp is the specific heat capacity of steam (around 2.0 kJ/kg·K for superheated steam)
- ΔT is the change in temperature (final temperature - initial temperature)
First, find the initial temperature at which the steam is saturated (this can be found in steam tables). Then, determine the final temperature of the superheated steam.
Subtract the initial temperature from the final temperature to get ΔT. Finally, multiply the mass, specific heat capacity, and ΔT to calculate the enthalpy change.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
To calculate the enthalpy change between saturated vapor and superheated steam, you'll need to know the initial and final temperatures.
As well as the specific heat capacity of steam. The enthalpy change (ΔH) can be calculated using the formula:
ΔH = m × Cp × ΔT
Where:
- ΔH is the enthalpy change
- m is the mass of steam
- Cp is the specific heat capacity of steam (around 2.0 kJ/kg·K for superheated steam)
- ΔT is the change in temperature (final temperature - initial temperature)
First, find the initial temperature at which the steam is saturated (this can be found in steam tables). Then, determine the final temperature of the superheated steam.
Subtract the initial temperature from the final temperature to get ΔT. Finally, multiply the mass, specific heat capacity, and ΔT to calculate the enthalpy change.
To know more about temperature click here
brainly.com/question/29072206
#SPJ11
What would be the major product of the following reaction? i) NaBH4 ii) NaH, Et20 A O=S=0 OCH2CH3 1) CH3CH2OCH(CH3)CH2CH2CH2CH3 II) (CH3CH20)2CHCHOHCH2CH2CH3 III) (CH3CH2)2CHOHCH2CH2CHOHCH3 IV) CH3OCH(C2H5)CH2CH2CH2CH3 V CH3CH2CH(OCH3)CH2CH2CHOHCH3
The major product of the reaction with reagents i) NaBH₄ and ii) NaH, Et₂0 is III) (CH₃CH₂O)₂CHCHOHCH₂CH₂CH₃.
In this reaction, we have two steps. First, NaBH₄ reduces the carbonyl group of the original compound A (an ester) to an alcohol. The reduction proceeds through a hydride transfer from the borohydride to the carbonyl carbon, resulting in an alkoxide intermediate, which subsequently picks up a proton to form the alcohol.
In the second step, NaH (a strong base) deprotonates the newly formed alcohol, forming an alkoxide anion.
The alkoxide then undergoes an intramolecular nucleophilic attack on the sulfur atom of the remaining ester group in a 5-membered ring transition state, leading to the formation of the final product III) (CH₃CH₂O)₂CHCHOHCH₂CH₂CH₃ through an S₃N-type reaction mechanism.
To know more about nucleophilic attack click on below link:
https://brainly.com/question/31279781#
#SPJ11