The order of elution in reversed-phase HPLC is different from that in a normal-phase separation, with more polar solutes eluting first. The mobile phase's polarity is increased to produce longer retention periods.
What is HPLC ?A method in analytical chemistry called high-performance liquid chromatography, formerly known as high-pressure liquid chromatography, is used to separate, recognize, and quantify each component in a mixture.
To obtain a consistent increase in the organic solvent (usually methanol or acetonitrile) over the course of the study, gradients in reversed-phase HPLC typically use on-line (dynamic) mixing of solvents. This increases the elution strength of the eluent over time.
Thus, In contrast to the normal phase HPLC, which employs a polar stationary phase and a less polar mobile phase, the reverse phase HPLC makes use of a nonpolar stationary phase and a polar mobile phase.
To learn more about HPLC, follow the link;
https://brainly.com/question/2292345
#SPJ1
An organic compound (CaHbNcOdCle) was synthesized and a sample of it was analyzed and found to contain only C, H, N, O, and Cl. It was observed that when a 0.150-g sample of the compound was burned, it produced 0.138 g CO2 and 0.0566 g H2O. All the nitrogen in a different 0.200-g sample of the compound was converted to NH3, which found to weigh 0.0238 g. Finally, the chlorine in a 0.125-g sample of the compound was converted to Cl- and by reacting it with AgNO3, all the chlorine was recovered as AgCl. The AgCl, when dried, was found to weigh 0.251 g. Calculate
the weight percent of each element in the compound.
The weight percent of each element in the compound. is given below.
The mass percent of C = 24%
The mass percent of H = 4%
The mass percent of Cl = 50%
The mass percent of N = 9.8%
The Mass percent of oxygen = 12.2%
The weight percent of the element in the compound?The following formula is used to calculate the mass of each component element in a sample of the compound:
The weight of C:
In 1 mole of CO2, there is 1 mole of carbon.
In 0.138 g of CO2, there will be:
0.138 g / 44 g * 12 g = 0.0368 g
H's mass:
1 mole of H2O contains 2 moles of hydrogen.
0.0566 g of H2O will contain the following quantity of H:
0.0566 g / 18 * 2 * 1 = 0.00628 g
volume of Cl;
In 1 mole of AgCl, there is 1 mole of Cl.
In 0.251 g of AgCl, the mass of Cl will be:
0.251 g / 143.5 g * 35.5 g = 0.0621 g
N's mass:
In 1 mole of NH3, there is 1 mole of N.
In 0.251 g of NH3, the mass of N will be:
0.0238g / 17.0 g * 14 g = 0.0196 g
Each element's mass percentage will be:
Mass proportion of C:
mass percent is equal to 0.0368/0.15 * 100.
24% mass percent
Mass proportion of H:
mass percent is equal to 0.00628/0.15 * 100%.
4% mass percent
Cl mass percentage;
Mass proportion of Cl:
mass percent is equal to 0.0621/0.125 * 100%.
50% mass percentage
N mass percentage:
Mass percent is equal to 0.0196/0.2*100%.
9.8% mass percent
Oxygen mass percentage equals 100 minus (24 + 4 + 50 + 9.8)
oxygen mass percentage: 12.2%
Learn more about organic compound from
https://brainly.com/question/6279332
#SPJ1
Goal: Atoms are composed of electrons, protons, and neutrons. It is the difference in the numbers of protons in the atoms that determine the different elements. You can determine the composition of an atom of any element from its atomic number and its mass number.
The given statement is correct. What atom we are looking at is determined by the number of protons.
How would you calculate an atom's or element's proton count?The atomic number of an element is equal to the number of protons in an atom. Use oxygen as an example. The periodic table states that oxygen has an atomic number of eight. The element's symbol is placed above the atomic number.
How can the abundance of protons within an atom be determined? How can the abundance of neutrons in such an atom be determined?A neutral atom has the same number of protons and electrons as protons. The total of the protons and neutrons with in atom's nucleus determines its mass, which is denoted by the letter M. The number of neutrons is equivalent to the discrepancy between the atomic number and the mass number of the atom (M) (Z).
To know more about protons visit
brainly.com/question/12535409
#SPJ4
Complete and balance the given precipitation reactions, including the physical states of the products as predicted by the solubility rules.
Ba(NO3)2 (aq)+ CuSO4(aq)-------->
K3 PO4 (aq)+ MgCl2 (aq)----------->
BaSO4 (s) + Cu(NO3)2 (aq) and KCl (s) + Mg3(PO4)2 (s) is the product of given precipitation reactions.
What is precipitation reactions ?Precipitation is the process of changing a dissolved substance from a super-saturated solution to an insoluble solid in an aqueous solution. Precipitate refers to the produced solid.The Ba2+ ions from the barium nitrate solution would react with the SO42- ions from the copper sulfate solution to form BaSO4, a white solid precipitate. The Cu2+ ions from the copper sulfate solution would react with the NO3- ions from the barium nitrate solution to form Cu(NO3)2, a blue solutionBa(NO3)2 (aq) + CuSO4 (aq) → BaSO4 (s) + Cu(NO3)2 (aq)
The K+ ions from the potassium phosphate solution would react with the Cl- ions from the magnesium chloride solution to form KCl, a white solid precipitate. At the same time, the Mg2+ ions from the magnesium chloride solution would react with the PO43- ions from the potassium phosphate solution to form Mg3(PO4)2K3 PO4 (aq) + MgCl2 (aq) → KCl (s) + Mg3(PO4)2 (s)
To learn more about precipitation reactions refer :
https://brainly.com/question/28182226
#SPJ1
Please, help me with this question !! Thank you so much.
Translation in the picture:
Among the 6 electronic structures, there is only one that is correct, in 5 that remain, each one has one fault, then directly to the figure, make a round around each fault (I've circled it, but I don't know how to explain it simply most), and give a simple explanation of what is the fault. (Answer in English)
Answer:
Explanation:
In this figure, the six electronic structures represent the electron configurations of six different elements: Li, Be, B, C, N, and O. The correct electron configurations are shown in green, and the incorrect ones are shown in red.
In the electron configuration for Li (top left), the fault is that the 2s orbital is not completely filled. The correct electron configuration for Li should have two electrons in the 1s orbital and one electron in the 2s orbital.
In the electron configuration for Be (top center), the fault is that the 2s orbital is not completely filled. The correct electron configuration for Be should have two electrons in the 1s orbital and two electrons in the 2s orbital.
In the electron configuration for B (top right), the fault is that the 2s orbital is not completely filled. The correct electron configuration for B should have two electrons in the 1s orbital, two electrons in the 2s orbital, and three electrons in the 2p orbital.
In the electron configuration for C (bottom left), the fault is that the 2p orbital is not completely filled. The correct electron configuration for C should have two electrons in the 1s orbital, two electrons in the 2s orbital, and four electrons in the 2p orbital.
In the electron configuration for N (bottom center), the fault is that the 2p orbital is not completely filled. The correct electron configuration for N should have two electrons in the 1s orbital, two electrons in the 2s orbital, and five electrons in the 2p orbital.
In the electron configuration for O (bottom right), the fault is that the 2p orbital is not completely filled. The correct electron configuration for O should have two electrons in the 1s orbital, two electrons in the 2s orbital, and six electrons in the 2p orbital.
I hope this helps! Let me know if you have any questions or need further clarification.
Consider a metal ion with the outer electron configuration of d4. In a coordination complex, the number of unpaired electrons in that metal ion depends on the orientation and type of ligands that surround it. Classify each description of a complex by the number of unpaired electrons in the d4 metal ion. Hint: read pages 1061 and 1062 in the 8th edition Silberberg book. 1. square planar strong field [Select] 2. octahedral weak field [Select] < 3. tetrahedral strong field [Select] 4. octahedral strong field [Select] 5. tetrahedral weak field [Select ] 6. square planar weak field [Select]
complexes can be classified based on number of unpaired electron as follows square planar strong field: 2 unpaired electrons, octahedral weak field: 4 unpaired electrons, tetrahedral strong field: 2 unpaired electrons, octahedral strong field: 0 unpaired electrons, tetrahedral weak field: 4 unpaired electrons, square planar weak field: 4 unpaired electrons.
In a coordination complex, the number of unpaired electrons in the metal ion depends on the strength of the ligand field and the orientation of the ligands. Strong field ligands have a higher affinity for the d orbitals and can more effectively stabilize them, leading to a lower number of unpaired electrons in the metal ion.
Weak field ligands have a lower affinity for the d orbitals and do not stabilize them as effectively, leading to a higher number of unpaired electrons in the metal ion. The number of unpaired electrons also depends on the orientation of the ligands, with an octahedron (6 ligands) and a tetrahedron (4 ligands) leading to different numbers of unpaired electrons.
To know more about coordinate bond
https://brainly.com/question/23847201
#SPJ4
The corrosion (rusting) of iron is represented as follows: 3 O2 (g) + 4 Fe (s) —> 2 Fe,O3 (s).
What volume (in liters) of Oxygen gas would be required to produce 32.0 g of Fe2O3?
Answer:
0.068 liters of Oxygen gas would be required to produce 32.0 g of Fe2O3.Explanation:
To calculate the volume of Oxygen gas that would be required to produce a given amount of Fe2O3, we need to use the balanced chemical equation for the corrosion (rusting) of iron. The equation is:
3 O2 (g) + 4 Fe (s) —> 2 Fe,O3 (s)
This equation tells us that for every 3 molecules of Oxygen gas that react with 4 molecules of Iron, 2 molecules of Iron (III) oxide (Fe2O3) are produced. Since the atomic weight of Oxygen is 16.0 g/mol and the atomic weight of Iron is 56.0 g/mol, the molar ratio of Oxygen to Iron in the equation is 3/16 = 0.1875.
We can use this molar ratio to calculate the volume of Oxygen gas that would be required to produce a given amount of Fe2O3. To do this, we first need to convert the mass of Fe2O3 to moles. Since the atomic weight of Fe2O3 is 159.7 g/mol, 32.0 g of Fe2O3 is equivalent to 32.0 / 159.7 = 0.201 moles of Fe2O3.
We can then use the molar ratio of Oxygen to Iron to calculate the number of moles of Oxygen gas that would be required to produce 0.201 moles of Fe2O3. Since the molar ratio of Oxygen to Iron is 0.1875, 0.201 moles of Fe2O3 would require 0.201 * 0.1875 = 0.0376 moles of Oxygen gas.
Finally, we can use the molar volume of a gas at standard temperature and pressure (STP) to convert the number of moles of Oxygen gas to volume. At STP, one mole of a gas occupies a volume of 22.4 liters, so 0.0376 moles of Oxygen gas would occupy a volume of 0.0376 * 22.4 = 0
Geh lang
Calculate the specific heat capacity of a metal if a 17.0 g sample requires 481 J to change the temperature from 25°C to 67°C
Answer:
The specific heat capacity of the metal is 0.529 J/g · C.
Explanation:
To calculate the specific heat capacity of a metal, you can use the following formula:
c = Q / (m * ΔT)
Where c is the specific heat capacity of the metal, Q is the amount of heat required to change the temperature of the metal, m is the mass of the metal sample, and ΔT is the change in temperature.
In your case, the amount of heat required to change the temperature of the metal is 481 J, the mass of the metal sample is 17.0 g, and the change in temperature is 67°C - 25°C = 42°C. Plugging these values into the formula, we get:
c = 481 J / (17.0 g * 42°C) = 0.529 J/g · C
Therefore, the specific heat capacity of the metal is 0.529 J/g · C.
The specific heat capacity can be calculated using the calorimetric equation. The specific heat capacity of the metal is calculated to be 0.67 J/ °C g.
What is specific heat capacity?The specific heat capacity of a substance is the heat energy required to rise its temperature by one degree celsius per one gram of the substance. It is an intensive property.
The calorimetric equation connecting the heat energy q to mass m, temperature difference ΔT and specific heat c is given below:
q = m c ΔT
Given mass = 17 g
heat energy q = 481 J
temperature difference = 67 - 25 = 42° C
Then c = 481 / (17 g × 42° C ) = 0.67 J/ °C g.
Therefore, the specific heat of the metal is 0.67 J/ °C g.
.
To find more on specific heat, refer here:
https://brainly.com/question/21041726
#SPJ2
FILL IN THE BLANK Collision frequency provides an upper limit on how fast a reaction can take place. The laws of probability tell us that the number of collisions depends on the _____ of the number of reactant particles, not their _____.
that the number of collisions depends on the energy, of the number of reactant particles, not their orientation.
How is energy defined?Energy is referred to by scientists as the capacity for work.People have figured out how to transform energy from one type to the other and use it to accomplish tasks, making modern civilization possible.
What function does orientation serve?boosts employee confidence and enables new hires to settle in more quickly; results in a more efficient and successful staff; increases employee retention; andencourages dialogue between the new employee and the supervisor.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ4
Which of the following electron transitions in a hydrogen atom emits radiation of the shortest wavelength?
A. n = 4 to n = 1
B. n = 2 to n = 8
C. n = 5 to n = 4
D. n = 2 to n = 1
E. n = 4 to n = 2
F. n = 1 to n = 5
The electron transition from n = 4 to n = 1 emits radiation of the shortest wavelength in a hydrogen atom.
How transition from n = 4 to n = 1 emits radiation of the shortest wavelength?Energy is either released or absorbed as an electron moves from one shell to another. The formula for calculating the wavelength produced by electron transfer is as follows:
1/λ = R ([tex]\frac{1}{n_{1} ^{2} } - \frac{1}{n_{2} ^{2} }[/tex])
where,
λ = wavelength of the photon (wavenumber = 1/wavelength)
R = Rydberg's constant (1.0973731568539(55) x 107 m-1)
[tex]n_{1}[/tex] and [tex]n_{2}[/tex] are integers where [tex]n_{2}[/tex] > [tex]n_{1}[/tex]
Therefore, on putting the respective values of [tex]n_{1}[/tex] and [tex]n_{2}[/tex], we can find out that the transition of electron from n = 4 to n = 1 radiates the shortest wavelength in a hydrogen atom.
Know more about hydrogen and electron transition:
https://brainly.com/question/15859557
#SPJ1
A molecule with the formula AB2 has a linear molecular geometry. Which of the following could represent the hybridization of the central atom?
In a molecule with the formula AB2, the hybridization of the central atom is typically sp hybridization. This type of hybridization allows for the formation of two single bonds in opposite directions, which gives the molecule its linear molecular geometry.
A molecule with the formula AB2, such as carbon dioxide (CO2), is an example of a linear molecular geometry. In this type of molecule, the central atom is bonded to two other atoms, forming a straight line. The hybridization of the central atom, which is the process of mixing different types of atomic orbitals to form new hybrid orbitals, is determined by the number and types of bonds formed with the atoms around it.
In a molecule with the formula AB2, the hybridization of the central atom is typically sp hybridization. This is because there are two single bonds formed with two different atoms, which would require the combination of one s orbital and one p orbital. The s orbital is used to form the sigma bond between the central atom and the two other atoms, while the p orbital is used to form the two pi bonds.
The sp hybridization of the central atom also allows the molecule to have a linear molecular geometry. This is because the two single bonds formed by the sp hybrid orbitals are in opposite directions and create a straight line, giving the molecule its linear shape.
Learn more about hybridization at : https://brainly.com/question/14140731
#SPJ4
How can you reduce the amount of waste you send to landfills?
Answer:
for reducing your landfill contribution
Reduce and reuse: The most obvious and easiest way to reduce your landfill contribution is by reducing and reusing as much as possible. ...
1,Recycle: ...
2,Compost: ...
3,Electric or gas dryer: ...
4,Drive less: ...
5,Reusable water bottle: ...
6,Plant a tree: ...
7,Recycle electronics
There are several ways you can reduce the amount of waste you send to landfills:
Reduce your consumption: One of the most effective ways to reduce waste is to simply consume less. This can involve reducing your use of single-use plastics, choosing products with minimal packaging, and opting for products that are made to be reused or recycled.
Recycle: Recycling is a process that converts waste materials into new products. By recycling, you can help to conserve natural resources and reduce the amount of waste that goes to landfills.
Compost: Composting is the process of breaking down organic material, such as food waste and yard trimmings, into a soil-like substance called compost. This can be used to enrich the soil and help plants grow.
Donate or sell gently used items: Rather than throwing away gently used items, consider donating them to a thrift store or selling them online. This can help to extend the life of these items and reduce the amount of waste that ends up in landfills.
Reuse: Look for ways to reuse items rather than throw them away. For example, you can use a reusable water bottle instead of disposable plastic bottles, or bring a reusable bag to the grocery store instead of using plastic bags.
Learn more about Chemical landfills here: https://brainly.com/question/9085477
ased on the data above, what can be concluded regarding the strength of the C-H, N-H, and O-H bonds in the molecules shown? (A) The C-H bond is the strongest. (B) The N-H bond is the strongest. (C) The O-H bond is the strongest. (D) Nothing can be concluded without knowing the strength of the H-CI bond.
The O-H bond is the strongest due to high electronegativity difference.
Bond energy, also known as mean bond enthalpy or average bond enthalpy in chemistry, is a measure of bond strength in a chemical bond. Bond energy is defined by the International Union of Pure and Applied Chemistry as the average value of the gas-phase bond-dissociation energy for all bonds of the same type within the same chemical species. The greater the difference in electronegativity, the greater the bond polarity and thus bond strength.
As the difference in the electronegativities of the bonded atoms grows, so does the bond dissociation energy. The electronegativity of the atoms in a compound influences the ionic bonds. More electronegative elements have a higher proclivity to form ionic character bonds with other elements.
To learn more about bond strength, here
https://brainly.com/question/20590677
#SPJ4
Which of these energies are most suited for study of the NaCl crystal structure? (Select all that apply.)
20.0eV
200eV
2.00keV
20.0keV
0.200MeV
2.00MeV
None of these
The NaCl crystalline nature can be studied best at energies between 20.0 and 200 eV.
What is an example of a structure?Examples of huge pile structures include bridges, anthills, skeletons, buildings, airplanes, beaver dams, and salt domes. The infrastructure of a human civilization is composed of the outcomes of construction, which are classified as buildings and non-building structures.
What class of words are structures?Structure is a noun or a verb, as was said before. I'm working on better time management so I won't be running behind schedule. I set up the agreement to keep our potential losses to a minimum. Use of the noun: The birds had created an impressive building out of sticks and other abandoned materials.
To know more about Structures visit:
https://brainly.com/question/25089140
#SPJ4
Draw the following neutral molecules and then indicate their charge and how they change when binding metal ions. Name an important protein or bioinorganic complex in which an analogue of each is found. Porphine (or porphyrin) Corrin Chlorin
1. Porphyrin[ formal charge=0, found in haemoglobin also found in cytochrome p-450.
2. Corrin [formal charge=0,found in vitaminB12]
3. Chlorin[formal charge =0,found in chlorophyll as Mg2+chlorin]
What is protein?
Proteins are substantial, intricate molecules that are essential to numerous bodily processes. They perform the majority of their work within cells and are necessary for the development, maintenance, and control of the body's tissues and organs.
For structures please refer attached file
For more information about protein please visit:
https://brainly.com/question/29553607
#SPJ4
Cytochrome p-450 and hemoglobin both include porphyrin; Vitamin B12 contains corrin; Chlorophyll contains chlorin.
Neutral molecules: What are they?
A neutral molecule is one that has an equal number of protons and electrons, which prevents it from having a positive or negative electrical charge.
When an atom has an equal amount of protons and electrons, it also has an equal number of positive and negative electric charges . The atom is referred to as neutral since its overall electric charge is zero.
Structure in attachment
To know more about neutral molecules use link below:
https://brainly.com/question/10204722
#SPJ4
put the enzymes of the first half of the citric acid cycle in order from left to right. rank the items from first to last. to rank items as equivalent, overlap them.
succinate dehydrogenase, malate dehydrogenase, fumarase, and succinyl CoA synthetase. As a cofactor, it uses NAD+ or NADP+ to catalyze the interconversion of malate and oxaloacetate.
What function does malate dehydrogenase have in the gluconeogenic process?The process of creating glucose from smaller molecules, known as gluconeogenesis, also involves malate dehydrogenase. Oxaloacetate, a citric cycle intermediate, is created in the mitochondria by the action of pyruvate carboxylase on pyruvate.
What role does malate play?In addition to being a TCA cycle intermediary, malate is a key component of mitochondrial energy homeostasis and the source of carbon skeletons transferred from mitochondria to promote amino acid production.
To know more about malate dehydrogenase visit:
https://brainly.com/question/16321635
#SPJ4
How do i know how many valence electrons a metal has?
Answer:
Valence electrons are the outermost electrons of an atom, and the number of valence electrons in a metal can be determined by looking at the element's position on the periodic table. Generally, the columns on the periodic table are arranged in order of increasing valence electrons, except for the transition metals. The element's oxidation state can determine the valence electrons for transition metals.
Explanation:
The above graph shows the journey of squirrel for a certain interval. Which of the following describes the motion of the squirrel between 5 s and 8 s?
The statement that describes the motion of the squirrel between 5s and 8s is as follows: The squirrel's speed did not change (option C).
What is a graph?A graph in mathematics and statistics is a data chart (graphical representation of data) intended to illustrate the relationship between a set (or sets) of numbers (quantities, measurements or indicative numbers) and a reference set, whose elements are indexed to those of the former set(s) and may or may not be numbers.
According to this question, a graph is used to illustrate the relationship between the distance moved by a squirrel and the time it took it to move i.e. the journey of squirrel for a certain interval or period of time.
Based on the graph above, the speed increased with time up until 5 seconds, however, from 5seconds till 8 seconds, the speed of the squirrel remained constant i.e. did not change until it picked up again.
Therefore, option C is the correct description of the situation of the squirrel between 5s to 8s.
The options to the incomplete question are as follows:
A. The squirrel's speed increased
B. The squirrel's speed decreased
C. The squirrel's speed did not change
D. The squirrel moved backward
Learn more about graph at: https://brainly.com/question/17267403
#SPJ1
Suppose that a certain fortunate person has a net worth of $77.0 billion ($ 7.70×1010 ). If her stock has a good year and gains $3.20 billion ( 3.20×109 ) in value, what is her new net worth?
Express your answer to three digits.
her new network is $80.20 billion
An organic compound (CaHbNcOdCle) was synthesized and a sample of it was analyzed and found to contain only C, H, N, O, and Cl. It was observed that when a 0.150-g sample of the compound was burned, it produced 0.138 g CO2 and 0.0566 g H2O. All the nitrogen in a different 0.200-g sample of the compound was converted to NH3, which found to weigh 0.0238 g. Finally, the chlorine in a 0.125-g sample of the compound was converted to Cl- and by reacting it with AgNO3, all the chlorine was recovered as AgCl. The AgCl, when dried, was found to weigh 0.251 g. Calculate the weight percent of each element in the compound.
The mass percent of each element is:
mass percent of C is 24%
mass percent of H is 4%
mass percent of Cl is 50%
mass percent of N is 9.8%
Mass percent of oxygen is 12.2%
What is the mass of each of the constituent elements in a sample of the compound?The mass of each of the constituent elements in a sample of the compound is determined as follows:
mass of C:
1 mole of C is present in 1 mole of CO₂
The mass of C in 0.138 g of CO₂ will be:
0.138 g / 44 g * 12 g = 0.0368 g
mass of H:
2 moles of H are present in 1 mole of H₂O
The mass of H present in 0.0566 g H₂O will be:
0.0566 g / 18 * 2 * 1 = 0.00628 g
mass of Cl;
1 mole of Cl is present in 1 mole of AgCl
The mass of Cl in 0.251 g of AgCl will be:
0.251 g / 143.5 g * 35.5 g = 0.0621 g
mass of N:
1 mole of N is present in 1 mole of NH₃
The mass of N in 0.251 g of NH₃ will be:
0.0238g / 17.0 g * 14 g = 0.0196 g
Mass percent of each element will be:
mass percent of C:
mass percent = 0.0368/0.15 * 100
mass percent = 24%
mass percent of H:
mass percent = 0.00628 / 0.15 * 100%
mass percent = 4%
mass percent of Cl;
mass percent of Cl:
mass percent = 0.0621 / 0.125 * 100%
mass percent = 50%
mass percent of N:
mass percent = 0.0196 / 0.2 * 100%
mass percent = 9.8%
Mass percent of oxygen = 100 - (24 + 4 + 50 + 9.8)
Mass percent of oxygen = 12.2%
Learn more about mass percent at: https://brainly.com/question/29565632
#SPJ1
Name the compound Al2O3.
A) Aluminum oxide
B) Aluminum (II) oxide
C) Dialuminum trioxide
D) Aluminum trioxide
E) Aluminum (I) oxide
Answer:
A
Explanation:
Aluminum has only one oxidation state, +3, so no need to specify its oxidation state (III) in its name. Also, ionic compound--between metals and non-metals--do not need a mono, di, or tri added to the beginning of each element's name.
In a galvanic cell, positively charged ions migrate from the salt bridge to the ______ compartment, while negatively charged ions migrate from the salt bridge to the ______ compartment.
Positively charged ions move from a salt bridge to the anode compartment in a galvanic cell, whereas negatively charged ions move from a salt bridge to a cathode compartment.
A Galvanic Cell is what?Galvanic or voltaic cells are two types of electrochemical devices that use chemical energy from spontaneous redox reactions to produce electricity. Convectional cell An electrochemical device known as a voltaic cell uses chemical reactions to produce electricity.
A galvanic cell's mechanism of operationThe electrical energy generated by the transfer of electrons during a redox reaction is used by galvanic cells to carry out practical electrical operations. Separating the oxidation / reduction half-reactions and connecting them with a wire makes it possible to collect the electron flow since the electrons must pass through the wire in order to move between the two half-reactions.
To know more about Galvanic Cell visit;
https://brainly.com/question/13031093
#SPJ4
given that the measured pH of a 0.10 M NH3(aq) = 11.15 and that of the 0.10 M NaOH(aq)= 12.85
A.) Which solution is more basic, explaining based on pH values?
B.) Considering the strength of each base and the identical solution Molarities, why is one so much more basic than the other ?
a) The more basic solution is NaOH
b) The reason for this is that NaOH is a strong bas and dissociates completely in solution.
What is the pH?We know that the pH has to do with the degree of acidity or alkalinity of the solution. The more the pH of the solution the more basic the solution is. The lesser the pH of the solution, the more acidic the solution is.
Drawing form the explanation above, the solution that is more basic is the sodium hydroxide solution. The sodium hydroxide solution is a strong base so it would ionize completely in solution.
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
The first the principal quantum number consider what property of an electrons?
a) direction of spin
b) orientation in space
c) distance from the nucleus
Answer:
Orientation in space.
Explanation:
I had a similar question.
Magnesium parts are typically attached using
Magnesium parts are typically attached using mechanical fasteners.
What are mechanical fasteners?A tool used to mechanically attach (or fasten) two or more things together is known as a mechanical fastener. Although there are many distinct kinds of mechanical fasteners, they can generally be split into two groups: permanent and non-permanent fastening.
There are many different kinds of mechanical fasteners, such as screws, nails, nuts, bolts, washers, anchors, and rivets.
Since World War II, magnesium sheet has been utilized in the transportation sector as a structural material.
For the purpose of attaching magnesium components to various metal substrates, upset protrusion joining was created. Cast and wrought alloys are the two primary divisions of magnesium alloys. Cast alloys made of magnesium are the most common use. Many industries use parts and components made of magnesium and magnesium alloys.
Read more on magnesium here:https://brainly.com/question/25860912
#SPJ1
provide the missing reagents and aromatic compounds in the reaction scheme. show formal charges if applicable. the nitro group can be found in the groups menu. note that this question provides no targeted feedback.
One of the most widely used explosophores—functional groups that give a compound its explosive properties—in the world is the nitro group. Also strongly electron-withdrawing is the nitro group. This property allows for the possibility of acidic C-H bonds that are alpha to the nitro group (nearby).
How can you recognize a nitro group?The silver-mirror appearance that develops at the end of the reaction serves as a marker for the Nitro group. Tollen's reagent is used to heat hydroxylamine even more. Heating causes hydroxylamine to oxidize into the appropriate nitroso compound and reduce Tollen's reagent to metallic silver.
A nitro functional group has what name?The prefix "nitro" is added to the name of the matching alkane or arene to create the name of any nitro compound.
To know more about nitro group visit:-
https://brainly.com/question/13028455
#SPJ4
question:-
What type of group is nitro group?
Now you shine light with a continuous energy distribution and you observe absorption lines at the following photon energies: 1eV, 3eV, 4eV, and 7eV. Using the information from the two experiments described, select the energies that correspond to all the energy levels of this atom. Hint: Similar to potential energy, the absolute values of the energy levels are arbitrary to a constant, but the difference in energies between levels is not. Follow the convention that the ground state energy (the lowest energy state) is the negative of the ionization energy and base your other answers around this. O eV -1 eV ✓-2 eV -3 eV -4 eV ✓-5 eV ✓-6 eV -7 eV -8 eV ✓-9 eV -10 eV -11 eV | -12 eV Now you turn off the light and run a beam of electrons through the gas. The kinetic energy of the electrons is 3.5 eV. Collisions of the electrons in the beam with the atoms in the gas exite the atoms to states above the ground state. Select all the possible energies of the emitted photons from this gas. 1 eV 2 eV 3 eV 4 eV 5 eV 6 eV 7 eV 8 eV 9 eV 10 eV
Answer:
help what is this im so sorry u have to do this
Explanation:
omg
An atomic nucleus, atom, or molecule's ground state is its lowest energy state. Excited states are referred to as higher energy states. Any particle property that has been quantized falls under the ground state.
What is Ground state energy?Atomic ground states and Ground states of vibration, Rotational ground conditions of atoms and molecules, as well as their excited states, are significant.
Most molecules are in their electron and vibrational ground states at ambient temperature; they must be heated to enter excited states.
Since a molecule requires less energy to enter a rotational excited state than an electron or vibrational excited state, the majority of molecules are in an excited rotational state at room temperature.
Therefore, An atomic nucleus, atom, or molecule's ground state is its lowest energy state. Excited states are referred to as higher energy states. Any particle property that has been quantized falls under the ground state.
To learn more about Ground state, refer to the link:
https://brainly.com/question/2289096
#SPJ2
lattice energy is associated with forming a crystalline lattice of alternating cations and anions from the blank ions. because the cations are positively charged and the anions are negatively charged, there is a blank of potential - as described by coulomb's law - when the ions come together to form a lattice. that energy is blank when the lattice forms.
In order to create a crystalline lattice of alternate cations and anions from the blank ions, lattice energy is required.
Ion charge and lattice energy: what's the connection?The lattice energy increases with increasing ion charge. The implication of this is that ions with higher charge values will result in ionic compounds with higher lattice energies. The lattice energies of the compounds that include ions with lesser charges are thus reduced.
How do ionic radii, lattice energy, and ion charge relate to one another?Ionic radii and lattice energy are inversely related. The gap between the positive and negative charges widens as ionic radii rise. As a result, the potential energy is less negative. Lattice energy thus declines.
To know more about lattice energy visit:-
https://brainly.com/question/29441166
#SPJ4
question:-
What is lattice energy?
which of these electron configurations are valid: i. 1s2 2s2 2p6 3s2 3p6 4s2 3d5 ii. 1s2 2s2 2p6 3s1 3p6
The valid electronic configuration among the following is 1s2 2s2 2p6 3s2 3p6 4s2 3d5.
The electronic configuration of shell of an atom is based on certain rules of atomic stability and chemical nature. In the Aufbau principle, the orbitals are filled in accordance with the atoms' increasing energies in their ground state. In Pauli's principle, there can never be two identical sets of four quantum numbers for an atom's electrons. In Hund's rule, Prior to each orbital in that subshell having one electron each, the electrons in the orbitals that belong to the same subshell (p, d, or f) pair. These rules must be followed while filling electrons in an orbital.
Hence, electron are filled in sub-shell in designated order.
To know more about Shell.
https://brainly.com/question/12783787
#SPJ
At constant temperature, the behavior of a real gas more closely approximates that of an ideal gas as its volume increases due to which of the following?
At Constant temperature, the behavior of a Ideal gas more closely approximates that of an ideal gas as its volume increases due to the average distance between the molecule becomes greater.
According to the Molecular Theory of gases, at constant temperature the behavior of a sample of a real gas more closely approximates that of an ideal gas as its volume is increased because the average distance between molecules becomes greater. The temperature did not change, so the average kinetic energy and average molecular speed did not change. The molecule size does not change either, so the molecule could not have expanded. The distance between the molecules increases causing a decrease in intermolecular forces, thus reducing the interaction between the molecules.
To learn more about Molecular theory of gases please visit:
https://brainly.com/question/134712
#SPJ4
Explain how the ionic bond is formed in Lithium Fluoride.
( I underlined the important part the rest is extra info that can help you understand)
Answer
Lithium is a metal (Alkali metal) it will donate one of its electrons to fluoride so then it becomes positively charged (cation).
(atoms are neutral because protons (p+) and electrons (e-) are equal taking one electron from an atom will make it positive)
Flouride is a nonmetal so it will accept the electron from lithium so then it becomes negatively charged (anion)
lithium is in group 1 so its charge is +1
Flouride is in group 17 so its charge is -1
both cancel each other so there are no subscripts