Complete two examples of how scientists, technologists, engineers, and mathematicians may work together to create a new product invention or innovation

Answers

Answer 1
One example for why or how Scientist, Engineers, Mathematicians, & Technologists may work together is to create something that doesn't already exists. Sometimes Engineers may call a Scientist to get help on how or why a certain product is made or used for something. There could be times where a Scientists & engineer may call a Mathematicians to help with the math

Related Questions

what year is gas powered cars expected stop being produced

Answers

Answer:

2035

Explanation:

The governors of a dozen U.S. states including California, New York, Massachusetts and North Carolina called on President Joe Biden on Wednesday to back ending sales of new gasoline-powered vehicles by 2035, a dramatic shift away from fossil fuels.

Answer:(:

Explanation:

Joe Biden on Wednesday to back ending sales of new gasoline-powered vehicles by 2035, a dramatic shift away from fossil fuels

on gasoline powered boats, when should the blower be operated?

Answers

Ans: 4 minutes


Explanation: It is recommended that you use a blower at least 4 minutes before you ever start the engine, and especially after fueling.

On gasoline powered boats, the blower should be operated before starting the engine, during fueling, etc.

In the following circumstances, the blower should be used on boats powered by petrol:

It's crucial to run the blower for a few minutes before starting the engine.It is advised to keep the blower going while you are fueling.When the vessel is in motion: Some marine safety recommendations advise running the blower continuously while the boat is underway, especially in enclosed engine compartments, however this is not required.

Thus, during these conditions, one should operate the blower.

For more details regarding gasoline powered boats, visit:

https://brainly.com/question/4143582

#SPJ6

2. How were scientists able to access a car's computer system?
3. What other looming dangers are there for drivers of newer, computer controlled

Answers

Ans:

2. The wireless hacking was done by taking advantage of the sensors inside each tire that broadcast a brief radio signal every 60 to 90 seconds. The signal tells one of the car's computer systems the pressure of each.

What are the rules for maintaining a time margin for safe driving?

Answers

Answer:

We should keep a good distance between the vehicle infront of us and from ours to avoid any type of accident.

3-second rule=>allowing a minimum of 3 seconds of travel between our vehicle and the vehicle we are behind.

Explanation:

HOPE IT HELPS YOU!!

Which of these systems creates and delivers high voltage sparks at the right time to ignite the air-fuel
mixture in the combustion chamber?

Answers

Answer:  Ignition System

Explanation:

Ignition System is the systems creates and delivers high voltage sparks at the right time to ignite the air-fuel mixture in the combustion chamber.

What are the 3 types of ignition systems?

Automotive ignition systems can be categorised: coil-on-plug, distributor-based, and distributor-free (COP). Early ignition systems delivered the spark at the appropriate time using entirely mechanical distributors.

Thus, it is Ignition System

For more details about types of ignition systems, click here:

https://brainly.com/question/14094081

#SPJ2

_____________ designers want to modernize the ao dai in many different ways. *
1 điểm
A. Fashion
B. Fashionable
C. Fashionably
D. Lot of

Answers

Answer:

fashion designers is the answer

Answer:

Fashion

Explanation:

hope my answer helps you .

Which type of material is known as elastomers to materials scientists and engineers

Answers

Answer:

Rubber-like solids with elastic properties are called elastomers.

Explanation:

Answer:

Rubber-like solids with elastic properties are called elastomers.

Explanation:

draw perpendicular lines based on the info in the image.

Answers

Wait let me try it…..

tech a says that all wheels must be torqued to prevent wheels from loosening up and falling off. tech b says that all wheels must be torqued to prevent over tightening, which can weaken lug studs and warp brake rotors. who is correct

Answers

Answer: New wheels should be re-torqued after the first 50 to 100 driving miles. This should be done in case the clamping loads have changed following the initial installation due to the metal compression/elongation or thermal stresses affecting the wheels as they are breaking in, as well as to verify the accuracy of the original installation.

Answer:

I thinkC

Explanation:

Based on your client's request, you will now create a sketch model of your designed pet toy. You will use your technical sketch and scale dimensions to create a computer model according to the same scale. However, the creation of the sketch model is only part of the engineer's responsibility. You must create a 300- to 500-word script for a persuasive presentation of your sketch model to your audience (client) and convince him or her that this new pet toy is a product that the company will want to sell. Be sure to incorporate design elements and materials into your reasoning in your presentation.

Answers

Answer:

From this in-depth examination we aimed to draw out some of the key ... closely their business case and employ model makers to create a 3D prototype.

Explanation:

BTSAUDY5 NAME STARTS FROM THIS

Answers

What is your question

Which of these statements is true about Newton's First Law of Motion?

If the net force on an object is zero, its velocity will remain constant
An unbalanced force on an object will always impact the objects speed
an unbalanced force on an object will always change the objects direction

Answers

Answer:

the second one is correct

Explanation:

Explanation:

» If the net force on an object is zero, its velocity will remain constant

Technician A says that the connecting rod and main bearing caps should be marked before removing to ensure that they can be installed in the exact same location when reassembled. Technician B says that the tip of the valve stem should be filed before removing valves from the cylinder head to help prevent damage to the valve guide. Who is right

Answers

Answer:

Technician A

Explanation:

This is because when the dimacations are made, the surface area and length respectively can be maintained to reduce to idea of force which may lead to damage

Write a short summary of the power of dreams

Answers

Answer:

Walker went on to front Paranoid Saints, the Ex-Kings and the Bollox.

Reunion

In November 2009, Power of Dreams announced a reformation and tour to promote the 20th anniversary re-release of their first album (on 100% Music)[8] in March 2010.[9] In December 2010, a further tour of Ireland took place with Sultans of Ping and The Frank and Walters to support the release of a compilation album, 1989: The Best of Power of Dreams, which included a new track.[10] Power of Dreams' most recent gig was as part of "Indie Daze" at London's Forum in September 2014.

In March 2011, Keith Walker announced an amicable departure from the band and has gone on to play with Sister Cities,[11] Being Cool Is Lonely and The Holy Coast.[12] Olney plays with a new band, Cat Meat.[13] Walker continued to perform as Power of Dreams and to work on new material alongside his new project, Mineral, based in Paris.[14] In 2014, The Avener had a chart-topping hit single in several European countries with "Fade Out Lines", a remix of a song written by Walker and Phoebe Killdeer (ex-Nouvelle Vague) for Phoebe Killdeer and the Short Straws' second album Innerquake, released in 2012.

In December 2011, Immigrants, Emigrants and Me appeared in the book 101 Irish Records You Must Hear Before You Die.[15] In April 2013, the album was in the Irish Independent's top 30 albums of all time.[16]

In 2020, Power of Dreams released two new singles, "America"/"Across the Shannon",[17][18] and "Hurricane",[19] to promote forthcoming album Aüslander.

In July 2021, Aüslander, their first album in 27 years was released by The state51 Conspiracy and became a new entry on the Official Irish Albums Chart Top 50 when it charted at Number 22 on the chart of 05 August 2021

what kind of abilities are needed to run a business

Answers

Answer:

Essential business skills:

1. Financial management. Being able to effectively manage your finances is critical. ...

2. Marketing, sales and customer service. ...

3. Communication and negotiation. ...

4. Leadership. ...

5. Project management and planning. ...

6. Delegation and time management. ...

7. Problem solving. ...

8. Networking.

on some early automobiles both headlights went out when one bulb burned out. the headlights must have been connected in

Answers

The light bulbs were connected to the same relay. When one headlight goes out, both go out at the same time. Now days, each headlight are on its own relay so if one headlight goes out, that light bulb goes out. That way you still have light.

what is the largest, low-cost airline carrier in the world, which recently canceled thousands of flights for reasons partially disputed by the federal aviation administration?

Answers

The largest, low-cost airline carrier in the world that recently canceled thousands of flights for reasons partially disputed by the federal aviation administration (FAA) is Southwest Airlines.

Southwest Airlines canceled 2,500 flights in just a few days.

According to Southwest Airlines, the cause of the cancellation is due to air traffic control problems and disruptive weather.

While FAA claimed that nothing like a reported case of air traffic and staffing shortages.

Southwest Airlines is the world's largest low-cost carrier and has its main office is located in Dallas, Texas.

Hence, in this case, it is concluded that the correct answer is "Southwest Airlines."

Learn more here: https://brainly.com/question/24782945

in the multiple pipe system shown below, which of the following is true concerning the linear system?.

Answers

Answer:

maybe

Explanation:

th liner pupe us it it had ore moecuke and tepiract

List Examples of what an engineer does

Answers

Answer:

The engineers below do it all: design, invent, fix, improve, research, travel, present, inspect, draw, write, calculate—but most of all, they work with really interesting people on great projects that are changing the world for the better.

what happen when position and crest of a light wave decreases

Answers

Answer:

All photons travel at the speed of light. ... From this equation, it is clear that the energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. Thus as frequency increases (with a corresponding decrease in wavelength), the photon energy increases and visa versa.

Explanation:

a ventilation blower should be operated for how long after fueling?

Answers

Ans: four minutes

Explanation: After fueling: Put the fill cap on tightly to prevent vapors from escaping. Open all windows, ports, doors, and other openings. If your boat is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine.
Other Questions
tightening of grip on slavery meaning Which expression is equivalent to -19-11? HURRY PHOENIX! Hey Phoenix It's worth 100 points!What should the following equation be multiplied by to eliminate the decimals? -200k 3.01 = 3.310010220 Given (x 7)2 = 36, select the values of x. Please answer the following question in Verilog.To test our functions we will generate a 3-bit vector that counts up by one every cycle which we will use as the inputs to the decoder. The decoder output will then be fed into the inputs of the encoder to produce an inverted version of the original 3-bit test vector. For every input vector you should toggle the enable signal to both the encoder and decoder function which can be easily done by using the clock waveform used to determine when to increment the input vector as the enable signal as well. Where is the highest outdoor observation deck in the western hemisphere? As the volume of a gas at 101.3kPa changes from 30mL to 95mL the volume of the gas will?1)Increases2) Decreases 3 Remains the same Choose the correct answer a is a negative odd numberchoose two words from the list which describe a^2NegativePositiveOddEven 6. What is the male equivalent of the word 'tart?(This is for the book of mice and men so if you know anything about this question please say.thank you! In Of Wolves and Men, the author describes wolves as term for the biceps brachii during forearm flexion How do prions make more of themselves? What syndrome did you researched I am buying a book now. How this sentence will be in passive voice? Creation of Israel - Sequence of EventsDirections: Put the following events in the order that they occurred. Number one's done___1___God commanded Abraham to leave his land inMesopotamia and go to the land that is present dayIsrael________The United Nations helped in dividing up the land thatwas promised to both the Jews and the Arabs at therequest of Great Britain._____During the British occupation of Palestine, the numberof Jewish settlers increased to 1 Jew to every 10 Arabs.________Palestine lost the Israeli War for Independence; theirland was divided among their Arab neighbors, leavingPalestine with nothing._______The British promised their support for the establishment of a Jewish homeland in Palestine in the BalfourDeclaration_______While under attack by Arab forces, the State of Israelwas created________Jews were forced out of their traditional lands tolocations throughout the world due to Romanpersecution_______Great Britain and France took over the Arab sections ofthe Ottoman Empire after its collapse. what is the distance between the two numbers on a number line 7,3 2/3 Solve for nn - 17=3 when does the right to enforce patent protection begin This graph represents 2x+y=4.Which ordered pair is in the solution set of 2x+y4?Question 6 options:(2, 2)(2, 2)(2, 2)(2, 2)