Complete the table below by writing the symbols for the cation and anion that make up each ionic compound.

Answer:

11.9

Explanation:

ph=poh-14 and vice versa. Always subtract by 14

Answer:

2

Explanation:

There are  3 carbons on the right side

there are only two on the left side....you need one more ...so add one more... change the '1' coefficient in front of C   to  '2'

Property of water:

Due to the water's ability to stick together (Cohesion), droplets form instead of being spread evenly.  

The strong cohesion between water molecules:  

Learn more about cohesion here:

https://brainly.com/question/1928484

#SPJ4

An inert gas is used as an electrical insulator.

Sulfur hexafluoride (SF 6)) is a very potent and long-lasting greenhouse gas that is primarily used as an electrical insulator and arc suppressor. It is non-flammable, non-toxic, inorganic, colorless, and odorless.

The sulfur atom's steric hindrance plays a significant role in the inertness of SF6, whereas SeF 6 and other heavieSFroup 16 equivalents are more reactive than SF 6 due to less steric hindrance.

However, it reacts exothermically with lithium and does not interact with molten sodium below its boiling point.

Learn more about SF6 (sulfur hexafluoride) here:-

https://brainly.com/question/11559180

#SPJ4

The pressure she exerts on the carpet sample:-5.8279 MPa

P = F/A

Where,

F= Force

A = Area

Given that;

d= 0.987 cm =0.987  x 10^-2 m

m= 45.5 kg

Area = πr^2= (π(0.987  x 10^-2)^2/2)

       =7.6511 x 10^-5  square meter

Force= mg

        = 45.5 x 9.8

        =445.9 N

Pressure = force/ area

              =445.9/7.6511 x 10^-5

              =5.8279 MPa

The pressure she exerts on the carpet sample:-5.8279 MPa

Learn more about Pressure here:-

https://brainly.com/question/13502302

#SPJ4

The answer is that they were were not based on evidence and experiment and that made alchemy unscientific in its practices.

Alchemy is an old practice that might be thought of as a forerunner of chemistry.

The term alchemy is derived from the Arabic al-kimiyya, which is derived from Greek. Alchemy's fundamental notions focus around the transformation of one substance into another, often transforming a basic metal like lead or iron into a "noble" metal like silver or gold

The alchemist's main ambitions were to find the Stone of Knowledge, the medium of Eternal Youth and Health, and metal transmutation.

To conclude with we can say Alchemy is based on magic and occultism rather than true investigation and facts. Many of the items in it have been utilised as fundamentals for certain chemistry, although the vast majority of them are wrong and inaccurate.

Learn more about alchemy here:

https://brainly.com/question/5997100

#SPJ10

Answer:

C.) n

Explanation:

-----> P = pressure (atm)

-----> V = volume (L)

-----> T = temperature (K)

-----> n = number of moles

According to the problem, it seems like pressure (P), volume (V), and temperature (T) are all changing. The problem never brings up whether the number of moles (n) has changed. Therefore, the number of moles (n) must have been held constant.

________________________________________________________

If you need to know what the temperature changes to....

When the number of moles is held constant, you can find the change in the other variables using the Combined Gas Law equation:

P₁V₁ / T₁ = P₂V₂ / T₂

In this formula, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure, volume, and temperature. You can find the final temperature by plugging in the given values and simplifying.

P₁ = 1.21 atm                      P₂ = 2.52 atm

V₁ = 3.75 L                        V₂ = 1.72 L

T₁ = 293 K                         T₂ = ? K

P₁V₁ / T₁ = P₂V₂ / T₂                                       <----- Equation

(1.21 atm)(3.75 L) / (293 K) = (2.52 atm)(1.72 L) / T₂         <----- Insert values

0.015486 =  (2.52 atm)(1.72 L) / T₂              <----- Simplify left side

0.015486 = 4.3344 / T₂                               <----- Multiply 2.52 and 1.72

0.015486 x T₂ = 4.3344                               <----- Multiply both sides by T₂

T₂ = 279.885                                                <----- Divide both sides by 0.015486

T₂ = 280 K                                                   <----- Answer in correct sig figs

Cooperative binding of oxygen occurs for hemoglobin.

Cooperative binding refers to the process whereby binding of one molecule of oxygen results in more binding of oxygen molecules due to increased affinity of oxygen by the ligand.

Cooperative binding of oxygen occurs in hemoglobin.

In conclusion, cooperative binding enables hemoglobin to carry oxygen efficiently.

Learn more about hemoglobin at: https://brainly.com/question/816005

#SPJ1

The rate of change of [tex]SO_2[/tex](g)=0.024M/s when the rate of change of [tex]CS_2(g)[/tex] is – 0.012 M/s.

Reaction rate, in chemistry, is the speed at which a chemical reaction proceeds.

[tex]CS_2(l)+3O_2(g)[/tex] → [tex]CO_2(g)+2SO_2(g)[/tex]

[tex]Rate = \frac{-dcs_2}{dt} =\frac{-do_2}{dt} =\frac{+dco_2}{dt} =\frac{1dso_2}{dt}[/tex]

Rate = \frac{-dcs_2}{dt}  =\frac{-do_2}{dt} =\frac{+dco_2}{dt} =\frac{1dso_2}{dt}

Given:

[tex]\frac{-dcs_2}{dt} =-0.012 M/s[/tex]

[tex]\frac{-dcs_2}{dt} =\frac{dso_2}{dt}[/tex]

[tex]\frac{dso_2}{dt}=0.024M/s[/tex]

The rate of change of [tex]SO_2[/tex](g)=0.024M/s

Hence, the rate of change of [tex]SO_2[/tex](g)=0.024M/s

Learn more about the rate of change here:

https://brainly.com/question/13103052

#SPJ1

River samples may evidence problems with the water treatment plant because it may contain an excessive amount of certain substances which are filtered during this procedure.

A water treatment plant is a place where wastewater from a city is processed and purified in order to obtain potable water.

Water treatment procedure generally involves the collection, chemical substance addition, filtration, and disinfection.

Any type of problem in these steps can be evidenced by taking a sample of the water after treatment.

In conclusion, river samples evidence problems due to an excessive amount of certain substances which are filtered during this procedure.

Learn more about water treatment here:

https://brainly.com/question/13348717

#SPJ1

Answer:

The total energy that an electron and positron share is 5 Mev    

Explanation:

One of the potential ways that gamma rays interact with matter is by the formation of positron-electron pairs.

The pair production requires a minimum gamma-energy of 1.02 MeV since an electron's rest mass is equal to 0.511 MeV of energy. The electron-positron pair receives any extra kinetic energy from the pair-producing gamma ray.

The reaction is represented by γ =(. - 1e⁰) +  (. + 1e⁰)

E = m₀C² + [tex]KE_{electron}[/tex] + m₀C² + [tex]KE_{positron}[/tex]

10 MeV = 2m₀C² + [tex]KE_{electron}[/tex] + [tex]KE_{positron}[/tex]

[ 2m₀C²= 1.02 ] and since the mass of electron and positron is the same, the Kinetic energy (KE), 1/2 mv² will also be the same

Therefore,

KE = 1/2(10 - 1.02)

    =4.49 MeV

[ 2m₀C²= 1.02 so, m₀C² = 1.02/ 2 = 0.51]

Total energy shared = m₀C² + KE

                                  =  0.51 + 4.49

                                  = 5 Mev

Learn more about the total energy of an electron and positron here

https://brainly.com/question/1615969

#SPJ4

Answer:

10 million years

Explanation:

For a sample to decay to 25% of its original amount, 2 half lives must have passed. Since one half life is 5 million years, multiplying this by 2 gives us that 2 half lives is 10 million years.

[tex]\huge\purple{Hi!}[/tex]

carbon atom can form four covalent bonds.

The relative molecular mass of an element is a proportion of the mass of the unified amu. The relative molecular mass of sodium hydroxide is 40.

The molecular mass of a substance is an addition of the individual masses of the element that makes the compound.  

Moles of NaOH = 8 mole

Molarity = 0.2 M

Moles of sodium hydroxide in 25 cm³: 25 × 0.2 = 0.005 moles

The mole ratio between the two moles:

0.2 ÷ 0.005 = 40

Therefore, 40 is the relative molecular mass of the acid.

Learn more about relative molecular mass here:

https://brainly.com/question/20382674

#SPJ1

Refrigeration will prevent bacterial growth which may result in uricase production and breakdown of uric acid in the sample.

An enzyme called uricase is responsible for catalyzing the change of uric acid into allantoin. Your body excretes uric acid, an acidic waste product, through urine. It is a typical result of the digestion of purine-rich meals.

Only media containing uric acid, allantoin, or allantoate as the primary or only source of carbon, nitrogen, and energy support the growth of the bacteria Bacillus fastidious. Raw extract of cells cultivated on uric acid had significant amounts of uricase.

Alcaligenes eutrophus, Pseudomonas aeruginosa, and Micrococcus denitrificans all displayed increased uricase activity after being placed in conditions containing uric acid, according to Kaltwasser. The ability of microorganisms to degrade uric acid and to use it for growth is an inducible property of various bacteria. Uricases of Bacillus fastidious and of Aspergillus nidulans were reported to be induced by uric acid.

Learn more about uricase here:

brainly.com/question/9332755

#SPJ4

Issues that should be taken into account:

"Urbanization implications" are the issues that governments must consider before passing conservation policies.  

Conservation policies:

It is a policy intended to preserve or restore a community, ecosystem, endangered species, or a natural or semi-natural environment.

Protecting the planet's natural resources for the benefit of present and future generations is known as conservation.

Urbanizations implications:

Learn more about the urbanizations implications here,

https://brainly.com/question/26946165

#SPJ4

Which holds true for nuclear fission? Check all that apply.

Which holds true for nuclear fusion? Check all that apply.

What is nuclear fission?

An unstable nucleus splitting into two smaller, more stable nuclei is known as nuclear fission. Large amounts of energy are released during this process since a smaller nucleus's structure requires a lot less energy to maintain. This mechanism is exploited by turning the thermal energy released into electrical energy.

What is nuclear fusion?

The alternative is nuclear fusion. It entails joining two smaller, less stable nuclei into one larger, more stable nucleus. The sun is where this process takes place because it needs so much energy. Moreover, a tremendous amount of energy is released. Helium, a two-proton element, is the smallest element that can be created using this procedure. The smallest element has one proton (H).

Learn more about nuclear fission here,

https://brainly.com/question/913303

#SPJ4

Answer:

A B D E

Explanation:

Edge 2023

Glucose is a sugar that can be reduced to produce an alcohol (option B). Details about glucose reduction can be found below.

Reduction is a reaction in which electrons are gained and valence is reduced.

Reduction can also mean the removal of oxygen or the addition of hydrogen to a substance.

Glucose is a chemical compound and sugar with the chemical formula of C6H12O6, however, it can undergo reduction reaction to produce alcohol/ethanol (C2H5OH) in a process called fermentation.

Learn more about reduction reaction at: https://brainly.com/question/19528268

#SPJ1

Answer:

1:loses or gains energy

Guanine pairs with cytosine using three noncovalent hydrogen bonds, while adenine pairs with thymidine using two noncovalent hydrogen bonds.

Cytosine and guanine are joined by three hydrogen bonds. The Watson and Crick bases differ from one another in strength as a result. Thymine and adenine bonded base pairs in DNA are weaker than guanine and cytosine bonded base pairs. Size and structure of the specific nucleotides cause Adenine and Thymine to always pair together while Cytosine and Guanine always pair together.

Adenine and thymine can make two hydrogen bonds, while cytosine and guanine can form three hydrogen bonds. Or, to put it more simply, A and G form bonds. Because each base can only link with one other base, the process is known as complementary base pairing.

Learn more about hydrogen bonds here:

brainly.com/question/9790513

#SPJ4

Answer:

3 moles Al2O3

Explanation:

See attached image.

A 20.0 g sample of methyl alcohol (CH₃OH, molar mass 32.0 g/mol) was dissolved in 21.6 g of water. The mole fraction of CH₃OH is 0.342.

Number of moles = [tex]\frac{\text{Given Mass}}{\text{Molar Mass}}[/tex]

Number of moles of CH₃OH = [tex]\frac{20\ g}{32\ g/mol}[/tex]

                                               = 0.625 mol

Number of moles of H₂O = [tex]\frac{21.6\ g}{18\ g/mol}}[/tex]

                                          = 1.2 mol

Mole Fraction = [tex]\frac{\text{Moles of solute}}{\text{Moles of solute + Moles of solvent}}[/tex]

                       = [tex]\frac{0.625}{0.625 + 1.2}[/tex]

                       = [tex]\frac{0.625}{1.825}[/tex]

                       = 0.342

Thus from the above conclusion we can say that A 20.0 g sample of methyl alcohol (CH₃OH, molar mass 32.0 g/mol) was dissolved in 21.6 g of water. The mole fraction of CH₃OH is 0.342.

Learn more about the Mole Fraction here: https://brainly.com/question/14498215
#SPJ4

55.2218 grams of magnesium chloride must be added to 725 mL of water to create a solution with an anion concentration equal to 0.800 M.

To calculate the number of moles from molarity as

[tex]\frac{\text{x moles}\ MgCl_2}{0.725\ \text{L solution}} = \frac{0.8\ \text{moles}\ MgCl_2}{1.0\ \text{L solution}}[/tex]

x moles MgCl₂ = [tex]\frac{0.8\ \text{moles}\ MgCl_2}{1.0\ \text{L solution}} \times 0.725\ \text{L solution}[/tex]

                         = 0.58 moles MgCl₂

Mass of one mole of substance is known as molar mass.

Molar mass of MgCl₂ = Atomic mass of Mg + 2 (Atomic mass of Cl)

                                   = 24.31 + 2 (35.5)

                                   = 95.21

Convert moles to grams

0.58 moles MgCl₂ × [tex]\frac{95.21\ g}{1\ \text{mole}\ MgCl_2}[/tex]

= 55.2218 grams

Thus from the above conclusion we can say that 55.2218 grams of magnesium chloride must be added to 725 mL of water to create a solution with an anion concentration equal to 0.800 M.

Learn more about the Molar mass here: https://brainly.com/question/837939

#SPJ4

The height of water column would be stable on Mars is 1.89 m

To answer the question, we need to know what the pressure on mars is

The pressure on mars P = ρgh where

Making h subject of the formula, we have

h = P/ρg

Since

Substituting the values of the variables into the equation, we have

h = P/ρg

h = 700 Pa/(1000 kg/m³ × 3.7 m/s²)

h = 700 Pa/370 kg/m²s²

h = 1.89 m

So, the height of water column would be stable on Mars is 1.89 m

Learn more about height of water column here:

https://brainly.com/question/12451614

#SPJ1

Answer:

c. because it lacks oxygen which might support life of the bacteria

Answer:

Carbonate

Explanation:

Carbonate is a combination of a carbon atom and two oxygen atoms for form a compound.

Answer:

- 0.57138096 M

- 0.571mol

- 0.571 M NaHCO3

- 0.571 mol/NaHCO3

(these are just different ways to identify the units but they all work and mean the same thing)

Explanation:

- molarity is measured by the ratio of the moles of a solute per liters of a solution

- the formula for molarity is: [tex]M = \frac{mol (s) solute}{L solution}[/tex]__________________________________________________________

- first, you need to convert 250mL to L so, [tex]250/1000=0.25[/tex]

- when it comes to converting g to mol you can do it in a separate equation but i prefer to do it all in one equation

__________________________________________________________

- so the equation for this specific problem would be set up like this:[tex]\frac{12.0g}{.25L} x \frac{1mol}{84.007 g} = x[/tex]

__________________________________________________________

- now to actually solve it:

[tex]\frac{12.0g}{.25L} x \frac{1mol}{84.007 g} = \frac{12.0}{21.00175} = 0.57138096(or)/0.571mol/0.571 M NaHCO3/(0.571 mol/NaHCO3)[/tex]

hope this helps :)

The chemical separation method for two of the above named mixtures or compound indicated above are explained below.

A chemical compound is a material generated by the chemical union of two or more elements in set quantities.

Benzophenone and tributylamine

The combination of benzophenone and tributylamine is in diethyl ether (given in question). Tributylamine is a base that may readily be changed to a water soluble salt by adding an aqueous acid.

Add dilute aqueous acid to the solution. The amine salt will be present in the aqueous layer, whereas benzophenone will be present in the ether layer. A separatory funnel will isolate levels.

Fluorenone, octanoic acid, and dicyclohexylamine

Fluorenone, Octanoic acid, and dicyclohexyl amine: The combination comprises both an acid (octanoic acid) and a base (dicyclohexyl amine) (dicyclohexyl amine).

Add the diluted aqueous base to the solution (like NaCO3). Divide the two layers.

The acid is present in the aqueous layer as a salt, while the fluorenone and amine are present in the ether layer.

Add weak aqueous acid to this combination of fluorenone and dicyclohexyl amine.

Divide the two layers. The amine is present in the aqueous layer, and fluorenone is present in the ether.

Learn more about chemical separation at;
https://brainly.com/question/17143033
#SPJ1

Answer:

72264x10²³moles

Explanation:

By Avogadro constant one mole of a substance is equal to 6022x10²³. so 12 hydrogen atoms =

12×6022x10²³=72264x10²³ moles.

The molecule expand to relieve steric strain before undergoing torsion to a non-planar structure in order to have several resonating structures.

It should be noted that a molecule simply mean the group of atoms that are bonded together that represents the smallest fundamental unit if the chemical compound.

It should be noted that structures containing fused benzene rings have extensive conjugation. Due to this, they can undergo resonance.

This is vital in decreasing the overall energy of the molecule and helps increase its stability. When there's a change in torsion angle to relieve the steric strain, the molecule won't be planar, hence, the energy will increase and the stability will reduce.

Learn more about molecules on:

brainly.com/question/26044300

#SPJ1