Class A foam can be used​

Answers

Answer 1

Class A foam is a specialized firefighting foam that is primarily used for extinguishing fires involving ordinary combustible materials, such as wood, paper, fabric, and plastics.

It is designed to enhance the effectiveness of water by reducing surface tension and increasing its ability to penetrate and wet these materials.

Class A foam can be used in various firefighting scenarios, including structural fires, wildland fires, and vehicle fires. It is particularly effective in situations where water alone may not be sufficient to control or extinguish the fire.

The use of Class A foam can improve firefighting operations by increasing the efficiency of water application, reducing water usage, and enhancing fire suppression capabilities. It helps to cool down the fire, minimize heat transfer, and reduce the generation of smoke and hazardous gases.

Overall, Class A foam is a valuable tool in the firefighting arsenal and can greatly aid in the extinguishment of fires involving ordinary combustible materials. Its application should be done in accordance with proper firefighting protocols and guidelines.

For more such questions on foam visit:

https://brainly.com/question/19842181

#SPJ8


Related Questions

Which of the following must be overcome by a rocket's thrust?

Answers

Answer:

the payloads weight

Explanation:

a p e x on the ground stream

Answer:

The payload's weight

Explanation:

i just took the test on a pex :)

. Which one is NOT an INDICATOR that a chemical has occurred
A) Gas is produced
B) Precipitate is produced
C) Change in energy
D) Change in mass

Answers

Ima guess D) change in mass

2. Some nitrogen at a pressure of 35.75 p.s.i is in a 100 L container. If the container's volume is reduced to 2250 ml then what is the resulting pressure?​

Answers

Answer:

1455.6

Explanation: you first convert 2250ml to l by dividing by 1000 so you get 2.25l then you use Boyles law which is p1v1=p2v2 then insert values

35.75*100=p2*2.25 then divide both sides by 2.25 then you get 1455.6

A 0.10M NH3 solution is 1.3% ionized, calculate the hydrogen ion concentration

Answers

Answer:NH3 + H2O <==> NH4+ + OH-

0.10 x 0.013 = 0.0013 M (this is the hydroxide concentration)

Kw = [H+] [H-]

1.00 x 10^-14 = (x) (0.0013)

x = 7.7 x 10^-12 M

Explanation:


PLEASE HELP!!!!!!!

Answers

Answer:

2nd option

Explanation:

Which one is it for a brialiest

Answers

I’m confused about the question

different between intermolecular and intra molecular dehydration​

Answers

Answer: Intermolecular bonds are the forces between the molecules. Intramolecular are the forces within two atoms in a molecule.

Explanation:

As mentioned in the kinetic molecular theory, what is the main reason that the volume of gas particles can be considered zero?
a)The bonds present in gas particles are stronger than other bonds, pulling atoms in closer to each other, causing a shorter bond length which greatly decreases the volume.
b)When atoms enter the gas phase, they are less affected by gravity, which lowers their mass and in turn, their volume.
c)The real volume of the gas particles is extremely small when compared to the entire volume of their container.
d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained.

Answers

Answer:

The real volume of the gas particles is extremely small when compared to the entire volume of their container.

d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained

Explanation:

Compare Dalton’s and Democritus’ ideas.

Answers

Answer:

please give me brainlist and follow

Explanation:

The key difference between Democritus and Dalton atomic theory is that the Democritus atomic theory is an ancient theory that scientists later refined and elaborated whereas Dalton atomic theory is a comparatively modern, scientific theory that we cannot discard due its important statements.

Cosmic rays are

A. High energy radiation produced in the ozone layer.
B. High energy radiation produced by the earth’s core.
C. None of these.
D. High energy radiation produced by the sun.

Answers

A. High energy radiation produced in the ozone layer. (:

3. The name of the functional group in the following compound
CH3 - CH2 - CH2 - CH-CH2 - CH3
1
CH3 – CH2
a. Methyl
b. Ethyl
C. Propyl
d. Isopropy!

Answers

Answer: a.) Methyl would be the answer.

Explanation:

A car generates 2552 N and weighs 2250 kg. What is its rate of acceleration

2 m/s ^2
0.88m/s^2
5,742,000m/s^2
1.13m/s^2

Answers

Answer:

[tex]a=1.134\frac{m}{s^2}[/tex]

Explanation:

Hello there!

In this case, by considering the physical definition of force in terms of mass and acceleration:

[tex]F=m*a[/tex]

Given the generated force and the involved mass, we can compute the required acceleration as shown below:

[tex]a=\frac{F}{m}\\\\a=\frac{2552N}{114kg}[/tex]

Yet it is necessary to break out Newtons to:

[tex]a=\frac{2552\frac{kg*m}{s^2} }{114kg}\\\\a=1.134\frac{m}{s^2}[/tex]

Best regards!

What is the source of Earth's magnetic field according to what you have read in chapter 222

Answers

Answer:

Scientists know that today the Earth's magnetic field is powered by the solidification of the planet's liquid iron core. The cooling and crystallization of the core stirs up the surrounding liquid iron, creating powerful electric currents that generate a magnetic field stretching far out into space.

What would you call the bright blue liquid?​

Answers

Answer: Also known as ‘blue nitro’. (Hope it’s right!)

What type of Weathering is important to sand storms on Mars? Physical or
Chemical?

Why would 3D printing be important on Mars and why would you use material from the surface of Mars.

We could "print" things that we need on Mars.
We could print things that we need on Mars and use material that is already on the planet
It would be so cool
The cost would be less expensive.

Answers

Answer:

1. Physical Weathering

2. Option B

Explanation:

1. Physical weathering

On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering

2. Option B

3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.

visible light travels from place to place as a

Answers

Answer:

Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.

Explanation:

A student dissolves 10.7 g of lithium chloride (LiCl) in 300. g of water in a well-insulated open cup. He then observes the temperature of the water rise from 22.0 °C to 28.6 °C over the course of 3.8 minutes. Use this data, and any information you need from the ALEKS Data resource:
LiCl(s) rightarrow Li+(aq) + Cl-(aq)
You can make any reasonable assumptions about the physical properties of the solution. Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.
1) Is this reaction exothermic, endothermic, or neither?
2) If you said the reaction was exothermic or endothermic, calculate the amount of heat that was released or absorbed by the reaction in this case.
3) Calculate the reaction enthalpy delta Hrxn per mole of LiCl.

Answers

Answer:

1) Exothermic.

2) [tex]Q_{rxn}=-8580J[/tex]

3) [tex]\Delta _rH=-121.0kJ/mol[/tex]

Explanation:

Hello there!

1) In this case, for these calorimetry problems, we can realize that since the temperature increases the reaction is exothermic because it is releasing heat to solution, that is why the temperature goes from 22.0 °C to 28.6 °C.

2) Now, for the total heat released by the reaction, we first need to assume that all of it is absorbed by the solution since it is possible to assume that the calorimeter is perfectly isolated. In such a way, it is also valid to assume that the specific heat of the solution is 4.184 J/(g°C) as it is mostly water, therefore, the heat released by the reaction is:

[tex]Q_{rxn}=-m_{Total}C(T_2-T_1)\\\\Q_{rxn}=-(300g+10.7g)*4.184 \frac{J}{g\°C} (28.6\°C-22.0\°C)\\\\Q_{rxn}=-8580J[/tex]

3) Finally, since the enthalpy of reaction is calculated by dividing the heat released by the reaction over the moles of the solute, in this case LiCl, we proceed as follows:

[tex]\Delta _rH=\frac{Q_{rxn}}{n_{LiCl}} \\\\\Delta _rH=\frac{-8580J}{10.7g*\frac{1mol}{150.91g} }*\frac{1kJ}{1000J} \\\\\Delta _rH=-121.0kJ/mol[/tex]

Best regards!

which bond does water atom share​

Answers

Answer:

Covalent bonds

Explanation:

A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.

Nitric oxide (NO) reacts with oxygen gas to produce nitrogen dioxide. A gaseous mixture contains 0.66 g of nitric oxide and 0.58 g of oxygen gas. After the reaction is complete, what mass of nitrogen dioxide is formed? Which reactant is in excess? How do you know? Suppose you actually recovered 0.91 g of nitrogen dioxide. What is your percent yield?

Answers

Answer:

NO is the limiting reagent.  

In this reaction 0.886 mole of NO2 is produced

Explanation:

The chemical equation for this reaction is  

2NO(g) + O2(g) → 2NO2(g)

In this limiting reagent reaction, 2 moles of NO reacts with one mole of O2  to produce 2 mole of 2NO2

0.886 mole of NO * (2 mole of NO2/2 mole of NO) = 0.886 mole of NO2

0.503 mole of O2 * (1 mole of NO2/1 mole of O2) = 1.01 mole of NO2

Hence, NO is the limiting reagent.  

In this reaction 0.886 mole of NO2 is produced

Atoms of which elements form bonds without satisfying the octet rule?

Answers

Answer:

Helium and hydrogen......

1. (An example of non-point-source pollution is
A. Wastewater from a leaking pipe.
B. Fertilizer runoff from lawns.
C. Oil from a leaking underground tank.
D. Chemicals released from a paper mill

Answers

Answer:

i think the answer is c.

Explanation:

Rusting is a chemical reaction between Iron metal [Fe(s)] and oxygen gas [O2(g)] in a slightly acidic environment. Rusting is actually a multi-step reaction, however it has the net overall reaction of:

4Fe+3O2--->2FeO3

If 100.0 g of iron metal are converted into rust, how many moles of rust will have formed? (Assume unlimited oxygen gas.)
*Hint* You already converted 100.0 g of Fe into moles of Fe in a previous question, start there.

Answers

Answer:

0.895 mole of Fe₂O₃.

Explanation:

We'll begin by calculating the number of mole in 100 g of Fe. This can be obtained as follow:

Molar mass of Fe = 56 g/mol

Mass of Fe = 100 g

Number of mole of Fe =?

Mole = mass / molar mass

Number of mole of Fe = 100 / 56

Number of mole of Fe = 1.79 mole

Finally, we shall determine the number of mole of Fe₂O₃ produced by the reaction of 100 g (i.e 1.79 moles) of Fe. This can be obtained as follow:

4Fe + 3O₂ — > 2Fe₂O₃

From the balanced equation above,

4 moles of Fe reacted to produce 2 moles of Fe₂O₃.

Therefore, 1.79 moles of Fe will react to produce = (1.79 × 2)/4 = 0.895 mole of Fe₂O₃.

Thus, 0.895 mole of Fe₂O₃ was obtained from the reaction.

What keeps the Earth orbiting on its current path
in our solar system?

Answers

gravity is the correct answer
Gravitational pull I think

I have a lab report I have to do for Chemistry on Edge, the lab is on Enthalpy.
please let me know if you need further information.

Answers

Answer:

I need further information.

Explanation:

Extra information is needed for you to know the correct information.

What is Enthalpy?

It is a thermodynamic quantity that is equal to the total heat content of a system. It is equal to the internal energy of the system plus the product of pressure and volume.

Enthalpy is nothing but energy and they are of 4 types in thermodynamics-

1. Internal Energy, U

2. Heat enthalpy, H

3. Helmholtz enthalpy, A

4. Gibb's Free enthalpy, G

The total energy of a system cannot be measured directly because the internal energy contains components that are unknown, not easily accessible, or are not of interest in thermodynamics. Generally, a change in enthalpy is the expression for measurements at constant pressure because it simplifies the information of energy transfer.

Therefore, Extra information is needed for you to know the correct information.

Learn more about Enthalpy, here:

https://brainly.com/question/3393755

#SPJ3

When NH3(g) reacts with O2(g) to form N2O(g) and H2O(l), 342 kJ of energy are evolved for each mole of NH3(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.

Answers

Answer: [tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]

Explanation:

The skeletal thermochemical equation for the reaction is:

[tex]NH_3(g)+O_2(g)\rightarrow N_2O(g)+H_2O(l)+342kJ[/tex]

The balanced  thermochemical equation for the reaction is:

[tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]

When 1 mole of [tex]NH_3[/tex] reacts with oxygen , heat released = 342 kJ

Thus when 2 moles of [tex]NH_3[/tex] reacts with oxygen , heat released = [tex]\frac{2}{1}\times 342 kJ=684kJ[/tex]

The dehydration of the alcohol functional group is a widely used reaction in organic chemistry. The mechanism is generally accepted to always operate via an ______ step-wise process. The _____ mechanism process will always produce (after dehydration) a ________________ style alkene as major product. The driving force for the production of this ________________ style alkene product is generally going to be determined by stability of the ________ ____________.

Answers

Answer:

EliminationEliminationZaitsevZaitsevCarbocation

Explanation:

The mechanism is generally accepted to always operate via an ELIMINATION step-wise process. The ELIMINATION mechanism process will always produce (after dehydration) a ZAITSEV style alkene as major productThe driving force for the production of this ZAITSEV style alkene product is generally going to be determined by stability of the CARBOCATION

Elimination mechanism is the removal of two substituents  from a molecule in either a one- or two-step mechanism

Carbocation is a molecule containing a positive charged carbon atom and three bonds

The mechanism is generally accepted to always operate via an elimination step-wise process. The elimination mechanism process will always produce (after dehydration) a Zaitsev style alkene as major product. The driving force for the production of this Zaitsev style alkene product is generally going to be determined by stability of the carbocation.

What is dehydration?

Dehydration is a process in which a water molecule releases from the given compound to form an unsaturated compound.

Dehydration process of alcohol is done by the elimination reaction in which water molecule eliminate and due to this dehydration we get an unsaturated product alkene. This dehydration process is go through the formation of carbocation which in turn forms the product. Stability of the product is determined by the Zaitsev rule and according to this rule most substituted product is the major and stable product.

Hence correct options are: Elimination, elimination, Zaitsev, Zaitsev and carbocation.

To know more about Zaitsev rule, visit the below link:
https://brainly.com/question/10099008

How much energy ( in joule ) does the Sun emit in one day (24 hours)? I've previously answered with 3.32, but it was incorrect. Please help thanks.

Answers

It is about 3.86 which is 10⁶⁶ watts

Answer:

410 quintillion Joules or 430,000,000,000,000,000,000 Joules

Which of the following forces has the smallest energy per bond?
A) iconic bonds
B) covalent bonds
C) hydrogen bonds
D) dispersion bonds

Answers

......A) iconic bonds........

The attractive forces existing between the molecules of a substance are known as the intermolecular forces. Among the given forces dispersion bonds has the smallest energy per bond. Thus option D is correct.

What is Dispersion forces?

The forces which are found in nonpolar molecules like O₂, N₂, Cl₂ etc. as well as in monoatomic gases such as 'He', 'Ne' etc. are called dispersion forces or London forces.

The London force is found to be the weakest intermolecular force and it is known to operate in all types of molecules. This force is also called the induced dipole - induced dipole attraction.

This force is generally resulted from the movement of electron cloud which creates a temporary instantaneous dipole. This distorts the arrangement of electrons of other atoms or molecules which are close to it and also induces a dipole in them.

In this way a large number of nonpolar molecules become polar temporarily and they are attracted by weak attractive forces. The dispersion bonds are easy to form and break.

The dispersion force is the weak attractive force and has the smallest energy per bond.

Thus the correct option is D - Dispersion bonds.

To know more about the dispersion bonds, visit;

https://brainly.com/question/30402657

#SPJ6      

     

is sublimation a chemical change or chemical property or physical change?

Answers

Answer:

Physical Change

Explanation:

Sublimation is a physical change. When a substance sublimes, it changes from a solid to a gas without going through the liquid phase.

The iodide in a sample that also contained chloride was converted to iodate by treatment with an excess of bromine: The unused bromine was removed by boiling; an excess of barium ion was then added to precipitate the iodate: In the analysis of a 1.54-g sample, 0.0596 g of barium iodate was recovered. Express the results of this analysis as percent potassium iodide.

Answers

Answer: The percentage of potassium iodide in the sample is 2.63 %.

Explanation:

The chemical equation for the reaction of iodide ions with bromine gas follows:

[tex]I^-+3Br_2+3H_2O\rightarrow 6Br^-+IO_3^-+6H^+[/tex]                (i)

The chemical equation for the reaction of iodate ions with barium ions follows:

[tex]Ba^{2+}+2IO_3^-\rightarrow Ba(IO_3)_2[/tex]                 ......(ii)

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of barium iodate = 0.0596 g

Molar mass of barium iodate = 487.13 g/mol

Using equation 1:

[tex]\text{Moles of barium iodate}=\frac{0.0596 g}{487.13 g/mol}\\\\\text{Moles of barium iodate}=1.22\times 10^{-4} moles[/tex]

By Stoichiometry of the reaction (ii):

1 mole of barium iodate is produced by 2 moles of iodate ions

So, [tex]1.22\times 10^{-4} moles[/tex] of barium iodate will be produced by [tex]\frac{2}{1}\times 1.22\times 10^{-4} =2.44\times 10^{-4}moles[/tex] of iodate ions

By the stoichiometry of the reaction (i):

1 mole of iodate ions are produced by 1 moles of iodine ions

So, [tex]2.44\times 10^{-4} moles[/tex] of iodate ions will be produced by [tex]\frac{1}{1}\times 2.44\times 10^{-4} =2.44\times 10^{-4}moles[/tex] of iodine ions

Moles of potassium iodide = Moles of iodide ions = [tex]2.44\times 10^{-4}[/tex]

Since, the molar mass of potassium iodide = 166 g/mol

Using equation 1:

[tex]\text{Mass of potassium iodide}=2.44\times 10^{-4}mol\times 166 g/mol\\\\\text{Mass of potassium iodide}=0.0405 g[/tex]

To calculate the percentage by mass of a substance, the equation used is:

[tex]\text{Percent by mass}=\frac{\text{Mass of a substance}}{\text{Mass of solution}}\times 100[/tex]

Mass of a solution = 1.54 g

Mass of potassium iodide = 0.0405 g

Using above equation:

[tex]\text{Percent potassium iodide}=\frac{0.0405 g}{1.54g}\times 100\\\\\text{Percent potassium iodide}=2.63\%[/tex]

Hence, the percentage of potassium iodide in the sample is 2.63 %.

Expressing the results of potassium iodide in percentage = 2.63%

The chemical reaction of iodine ions with Bromine gas can be expressed as :

I⁻  + 3Br₂  + 3H₂O  -- > 6Br⁻ + IO₃ + 6H⁺ ----- ( 1 )

Chemical reaction between iodate ions with barium ions  can be expressed as :  Ba²⁺  + 2IO⁻₃ ------> Ba ( IO₃ )₂   --------- ( 2 )

Step 1 : Calculate the number of Barium iodate moles

mass of Barium iodate = 0.0596 g

molar mass of Barium iodate = 487.13 g/mol

from equation ( 1 )

moles of Barium iodate = ( 0.0596 ) / ( 487.13 ) = 1.22 * 10⁻⁴ moles

also from equation ( 1 ) the moles of potassium iodide = moles of iodide ions

= 2.44 * 10⁻⁴

molar mass of potassium iodide = 166 g/mol

Next step : Determine the mass of potassium iodide

moles of potassium * molar mass

= 2.44 * 10⁻⁴  * 166 g/mol  = 0.0405 g

Final step : Determine the percentage of potassium iodide in the solution

Percentage = ( mass of potassium iodide / mass of solution ) * 100

                   = ( 0.0405 / 1.54 ) * 100

                   = 2.63%

Hence we can conclude that potassium iodide in percentage = 2.63%

Learn more : https://brainly.com/question/3388761

Other Questions
Fill in the blankDNA IS NOT TURNED ON ALL OF THE _____ IN ALL OF THE CELLS. The data set below represents a sample of scores on a 10-point quiz. 7, 4, 9, 6, 10, 9, 5, 4 Find the sum of the mean and the median Please help! What is the population of people?? Answer and explanation please! no links :\ What is the area of this figure? (I give brainliest!) Provide an example of how a genetic mutation could be positive, then explain how that mutation could cause a change in a population over time. Pls no links can someone pls tell me what to put to fill in the blanks please someone????? Do you think that the Judicial Branch is truly independent from outside influences? (explain your response)Type Your response here: Claim Evidence Analysis 10 point!!!! The diameter of a circle is 20 centimeters. What is the circumference? Clarence has $90 in a savings account that earns 10% annually. The interest is notcompounded. How much will he have in 5 years? PLEASE HELP WILL MARK BRAINLIEST Decide whether each characteristic describes conditions in the North or the South at the end of the Civil War. I'll give brainliest please help Find the range of the function a sheriff of a rural county has noticed a rise in car thefts. he thinks the crimes may be perpetrated by young people who are bored. the sheriff sets up a program to speak in the local high school about the penalties for auto theft. what goal of law enforcement is the sheriff working on? group of answer choices general deterrence incapacitation punishment rehabilitation Which of the following is most likely to happen in a market economic system? (a) Storekeepers will try to give customers what they want. (b) Most stores will be owned by the government. (c) The price of goods and services will be set by the government. (d) Young people will take on the occupation of their parents when they grow up. Write 9.26 a.m in a 24-hour time format consumer federation of america. "credit card debt imposes huge costs on many college students." consumer federation of america. consumer federation of amer., 8 june 1999. web. 4 mar. 2001. The ratio of girls to boys in a grade is 6 to 5. If there are 24 girls in the grade, how many students are there altogether? plssssssssssssssss helpYou read Carl Sandburgs poem A Fence earlier in this module. Reread it below, paying close attention to the poets word choices.A Fence by Carl SandburgNow the stone house on the lake front is finished and the workmen are beginning the fence.The palings are made of iron bars with steel points that can stab the life out of any man who falls on them.As a fence, it is a masterpiece, and will shut off the rabble and all vagabonds and hungry men and all wandering children looking for a place to play.Passing through the bars and over the steel points will go nothing except Death and the Rain and To-morrow.Which phrase relies most on nuances of meaning to convey a tone or attitude toward the fence?a place to playcan stab the lifethrough the barsbeginning the fence The linear approximation at z = 0 to sin(42) is A + Bz where A is: How much work is done when a car is moved 10 m with a force of 3.4 N?