Choose the properties that the following element may have based n its location in the periodic table.

Magnesium (Mg):
- dull
- less reactive than sodium
- a gas

Answers

Answer 1
Answer: Less reactive than sodium

Why: Due to being in the second period, we can say that Mg has two electrons as opposed to one. More electrons generally means less reactive. Because Mg is a metal, dull might not make sense, and it wouldn’t be a gas.

Related Questions

Which of these would a chemist most likely study?


why airplanes are able to fly

how rain affects statues

why monkeys have tails

where earthquakes tend to occur

Answers

A chemist would most likely study the chemical properties and behaviors of elements and compounds. Therefore, a chemist would most likely study "why airplanes are able to fly." Although the study of earthquakes and animals such as monkeys could involve chemical elements and compounds, those areas of study would most likely be more closely aligned with geology or biology, respectively.
Final answer:

A chemist would most likely study how rain affects statues as it involves analyzing the physical and chemical changes caused by rainfall on different materials, such as metal or limestone.

Explanation:

A chemist would most likely study 'how rain affects statues'. This query falls under the domain of chemistry as it involves the study of physical and chemical changes caused by rainfall on different materials. Rainwater, due to the presence of various dissolved gases, can be slightly acidic. When this water comes in contact with statues, especially those made of certain metals or limestone, it can react causing corrosion or weathering, which a chemist would study.

In the case of metal statues, the acidic nature of rainwater can initiate corrosion processes, leading to the gradual degradation of the metal's surface. This phenomenon involves chemical reactions that a chemist is well-equipped to elucidate and study.

For statues crafted from limestone or other calcareous materials, rainwater can cause weathering, a process that involves chemical dissolution and physical erosion. Understanding the chemical intricacies of these reactions falls squarely within the purview of chemistry.

Hence, the study of 'how rain affects statues' inherently encompasses the investigation of the chemical alterations and transformations induced by rainfall, rendering it a quintessential domain of chemistry. This research not only sheds light on the impact of environmental factors on cultural artifacts but also contributes to the broader understanding of chemical interactions in the natural world.

Learn more about Chemistry here:

https://brainly.com/question/36629312

#SPJ2

Considering both the forward and reverse directions, identify the Bronsted acids in the reaction below:
CH₃NH₂(aq) + H₂S(aq) ⇄ CH₃NH₃⁺(aq) + HS⁻(aq)

A.) CH₃NH₂ and HS⁻
B.) H₂S and CH₃NH₃⁺
C.) CH₃NH₂ and N₂S
D.) H₂S and HS⁻
E.) CH₃NH₂ and CH₃NH₃⁺

Answers

Considering both the forward and the reverse directions,  the Bronsted acids in the reaction is  H₂S and CH₃NH₃⁺. The correct option is B.

The chemical reaction is as :

CH₃NH₂(aq) + H₂S(aq) ⇄ CH₃NH₃⁺(aq) + HS⁻(aq)

According to the Bronsted - Lowry theory, acids are the substance that will donates the H⁺ ion or the proton and it will forms the conjugate base.

In the forward reaction, the H₂S donates the proton to the CH₃NH₂.

In the reverse reaction, the CH₃NH₃⁺ will donates the proton to the HS⁻.

Hence, the Bronsted - Lowry acids in the reversible reaction are H₂S and CH₃NH₃⁺. The option B is correct.

To learn more about Bronsted acids here

https://brainly.com/question/148529

#SPJ1

cl-+peg=hcl+peg rate law, rate constant k

Answers

a. The rate law for this reaction is: Rate = k[Cl] [H₂]. This means that the rate of the reaction is directly proportional to the concentrations of both Cl and H₂ molecules.

What is rate law?

Rate law is an equation that describes the rate of a chemical reaction as a function of the concentrations of reactants. The rate law allows us to describe how the rate of a reaction changes when the concentrations of reactants are changed. It is derived from the rate equation, which is a mathematical expression that can be used to calculate the rate of a reaction from the concentrations of the reactants and the rate constant.

b. The rate law for this reaction is: Rate = k[O] [Os]. This means that the rate of the reaction is directly proportional to the concentrations of both O and Os molecules.
c. The rate law for this reaction is: Rate = k[NO₂]₂. This means that the rate of the reaction is directly proportional to the square of the concentration of NO₂ molecules.

To learn more about rate law
https://brainly.com/question/16981791
#SPJ1

Complete Question:

PLEASE HELP!!!!!!!!!!!!!!!!!! Oxygen is in the 16th period, and should therefore have a 2- charge. peroxide also has a charge of 2-. Are they supposed to have the same charge? If so in nomenclature, how do I choose which one to use?

Answers

Each oxygen atom in peroxide compounds like hydrogen peroxide (H2O2) has an additional electron that it shares with the other oxygen atom in the compound, giving the oxygen a charge of -1.

What is a compound?

Any substance comprised of two or more elements that are chemically linked together is known as a compound. A compound's constituent parts are always present in a specific ratio. As an illustration, the substance water (H2O) consists of two hydrogen atoms that are chemically bound to one oxygen atom.

Actually, oxygen belongs to the second period of the periodic table. It can create two covalent bonds with other elements to complete its octet and has six valence electrons.

Each oxygen atom in peroxide molecules like hydrogen peroxide (H2O2) has a charge of -1. This is due to the fact that each oxygen atom in the molecule has an additional electron that it shares with another oxygen atom.

To know more about compound visit:

brainly.com/question/14117795

#SPJ1

Question 1
This diagram shows Earth in four different positions during its yearly orbit around the sun. Which of the following accurately describes the position of the United States during the summer months?

Question 2
The diagram models 4 lunar phases. During which one is the tide the highest?

Question 3
An HR Diagram is shown below. A star that has a luminosity of 10^-2 is likely a…

Question 4
Earth's atmosphere blocks short wavelengths of the electromagnetic spectrum. Which telescopes DO NOT need to be placed in orbit around Earth to observe short-length radiation?

Question 5
A student models the relationship between the Earth and the Sun using string and a ball. Which of the following explains the relationship demonstrated?

Answers

Answer 1:

During the summer months in the northern hemisphere (where the United States is located), Earth is in position C, which is when the northern hemisphere is tilted towards the sun.

Answer 2:

The highest tide occurs during the full moon phase, which is represented by position C in the diagram.

Answer 3:

A star that has a luminosity of 10^-2 is likely a red dwarf.

Answer 4:

Telescopes that observe short-wavelength radiation, such as X-rays and gamma rays, do not need to be placed in orbit around Earth because these wavelengths are absorbed by the atmosphere. Therefore, telescopes that observe these wavelengths are typically placed in space, outside of Earth's atmosphere.

Answer 5:

The student is likely demonstrating the relationship between the Earth and the Sun's gravitational pull. The ball represents the Sun, and the string represents the gravitational force pulling the Earth towards the Sun. The demonstration shows how the Earth orbits the Sun due to this gravitational force.

What is gravitational force?

Gravitational force is described as a force that exists between any two objects in the universe that have mass.

It is the force that causes objects with mass to be attracted to each other. The magnitude of the gravitational force between two objects depends on their masses and the distance between them.

Along with the electromagnetic force, the strong nuclear force, and the weak nuclear force, gravity is one of the four fundamental forces of the universe.

Sir Isaac Newton initially introduced it in his law of universal gravitation, and Albert Einstein later elaborated on it in his theory of general relativity.

Learn more about Gravitational force at: https://brainly.com/question/27943482

#SPJ1

4. Pipettes used for the transfer of samples of solutions are always rinsed with a small portion of the solution before the actual sample is taken. Calculate the percent error likely to arise in an experiment if 5-mL, 10-mL, and 25-mL pipettes are used for transfer and each pipette contains 5 drops of water adhering to the inside of the barrel. A single drop of water has a volume of approximately 0.05 mL.​

Answers

The experiment employing these pipettes would most likely have a 5% error rate.

We use percent error because?

When your estimate aims at a known, accurate figure, percent error is a useful metric. Use it to measure how near an estimate is to the actual value, in general. When an approximation value is near to the true value, there are fewer mistakes.

What does percent error for percentages mean?

The percent error is the distinction between the estimated value and the actual value in relation to the actual value. In other words, the relative error is multiplied by 100 to calculate the percent error.

To know more about experiment visit:-

https://brainly.com/question/30055326

#SPJ1

If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution?

Answers

The concentration of NaOH in the resulting solution is 1.80 mol/L.To determine the concentration of NaOH in the resulting solution, we need to use the equation:

What is concentration ?

concentration (in units of mol/L) = moles of solute / volume of solution (in units of L)

First, we need to calculate the moles of NaOH added to the flask:

moles of NaOH = mass of NaOH / molar mass of NaOH

moles of NaOH = 36.0 g / 40.00 g/mol

moles of NaOH = 0.900 mol

Next, we need to determine the volume of the solution. We know that 36.0 g of NaOH were added to a 500.0 mL volumetric flask, but the final volume of the solution is not given. We can assume that the volume of the solution is 500.0 mL, since that is the volume of the flask. However, we also need to take into account the fact that the addition of NaOH may cause the volume of the solution to increase slightly due to the dissolution of the solute.

Assuming that the volume of the solution is 500.0 mL, we can convert this to units of liters:

volume of solution = 500.0 mL / 1000 mL/L

volume of solution = 0.500 L

Now we can use the equation above to calculate the concentration of NaOH in the resulting solution:

concentration = 0.900 mol / 0.500 L

concentration = 1.80 mol/L

Therefore, the concentration of NaOH in the resulting solution is 1.80 mol/L.

To know more about concentration, visit:

https://brainly.com/question/23158560

#SPJ1

Complete question is: If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, 1.80 mol/L concentration of NaOH in the resulting solution.

Use the kinetic-molecular theory to explain each observation given.
a. Wax melts near the flame of a burning candle.
b. Liquid water may be converted into ice cubes in a freezer.
c. Ginger ale flows to match the shape of a glass.
d. Water gradually evaporates from a swimming pool.
e. Water vapor condenses inside house windows on cold days.
f. Snow gradually disappears, even when the tem- perature remains below freezing. g. Solids and liquids cannot be compressed as much as gases.

Answers

a. Wax melts near the flame of a burning candle because the kinetic-molecular theory states that the higher the temperature, the faster the molecules move. Since the flame of a burning candle is hot, the wax molecules move faster, allowing them to take up more space and eventually melt.

What is kinetic-molecular theory?

The kinetic-molecular theory is based on the following five fundamental principles:

The average distances between the molecules that make up a gas are substantially bigger than the diameters of the individual molecules. When compared to the volume of the gas itself, the volume filled by the gas' molecules is insignificant.

In a perfect gas, neither the molecules nor the container walls are attracted to one another.

The molecules move randomly and continuously and, as physical objects, they are subject to Newton's laws of motion. Until they collide with one another or the container walls, the molecules move in a straight line.

Collisions are fully elastic; although two molecules' orientations and kinetic energies change when they collide, the overall kinetic energy is conserved. It is not "sticky" to collide.

The relationship between the average gas molecule kinetic energy and absolute temperature is direct. The word "average" is crucial in this context because individual molecules' velocities and kinetic energy will vary widely, with some even having zero velocities at specific times. This suggests that if the temperature were to drop to absolute zero, all molecular motion would stop.

Explanation:

b.  Since a freezer is much colder than room temperature, the water molecules move very slowly and become organized, allowing them to form ice cubes.

c. All matter is made up of many small particles that are in constant motion. When the ginger ale is poured into the glass, the molecules of the liquid spread out to fill the shape of the glass due to their motion.

d. The molecules in a liquid are in constant motion, and that when they move, they bump into each other, passing energy from one to the other. This energy causes the particles to move faster. As they move faster, they create turbulence that causes them to break away from the liquid surface. These particles then form a vapor, which is an invisible form of water called water vapor. As these particles accumulate together, they gradually evaporate from the swimming pool, eventually diminishing its water level.

e. Water vapor condenses inside house windows on cold days because the molecules of water vapor slow down and as they lose energy they no longer have enough kinetic energy to remain in the gaseous state. The molecules then condense and form liquid water droplets on cool surfaces such as windows.

f. Snow gradually disappears even when the temperature remains below freezing because the heat stored in the snow starts to melt the snow. This occurs even when the outside temperature remains at freezing or below because the heat is released from the snow and warms the surrounding air.

g. Solids and liquids cannot be compressed as much as gases because the particles of gases have more energy and thus more freedom of movement than particles of solids and liquids. The particles of gases can move around and can occupy larger spaces than particles of solids and liquids, allowing them to be compressed more effectively.

To know more about kinetic energy, visit:

https://brainly.com/question/15764612

#SPJ1

Determine the mass in grams of 7.55 × 1021 molecules of water H2O.
a.
7.14 × 10-4 g
d.
22.6 g
b.
2.59 x 102 g
e.
2.59 g
C.
0.226 g

Answers

The mass in grams of 7.55 × 10²¹ molecules of water H₂O is 1.25 × 10⁻² g.

This is using mole concept.

What is mole?

The International System of Units (SI) uses the mole (symbol mol) as the unit of material amount. How many elementary entities of a particular substance are present in an object or sample is determined by the quantity of that material.

Exact 6.02214076 × 10²³ basic entities make up the mole. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle like a proton depending on the makeup of the substance. For instance, although having differing volumes and masses, 10 moles of water (a chemical compound) and 10 moles of mercury (a chemical element) both have the same quantity of substance, and the mercury has exactly one atom for each molecule of the water.

The mass in grams of 7.55 x 10²¹ molecules of water H₂O can be calculated using Avogadro's number. Avogadro's number is 6.02 x 10²³molecules/gram-mole.

Mass (grams) = (7.55 x 10²¹ molecules) (1 Gram/6.02 x 10²³ molecules)

Mass (grams) =  1.25 x 10⁻² grams

To know more about Avogadro's number, visit:

https://brainly.com/question/11907018

#SPJ1

Which of the following choices fits in the blank to complete the equation?
ΔG° = ΔΗ°
OA. + AS
B. + TAS
O C. - AS⁰
.
OD. - TAS

Answers

The equation can be written as; ΔG = ΔH - TΔS

What is the equation of the free energy?

The equation for the free energy change (ΔG) in a system can be expressed in terms of the enthalpy change (ΔH) and entropy change (ΔS)

The Gibbs free energy equation links changes in enthalpy and entropy that occur during a process to changes in a system's free energy. If G is negative, the process can happen spontaneously and is thermodynamically beneficial.

If G is positive, the process requires an energy input and is not thermodynamically favorable. The system is in equilibrium if G is zero.

Learn more about free energy:https://brainly.com/question/15319033

#SPJ1

What is the pH of a solution that has a hydronium concentration of 4.8 x 10-12

Answers

The pH of a solution that has a hydronium concentration of 4.8 x 10⁻¹² is 11.32.

What is pH?

The term "potential of hydrogen" (sometimes known as "power of hydrogen") has historically been used to describe this property in chemistry. It is a scale used to describe how basic or how acidic an aqueous solution is. Lower pH values are recorded for acidic solutions (solutions with higher H+ ion concentrations) than for basic or alkaline solutions.The set of standard solutions whose pH has been defined by international agreement can be used to trace the pH scale.[4] Using a concentration cell with transference, the potential difference between a hydrogen electrode and a standard electrode, such as the silver chloride electrode, is measured to get the primary pH standard values. With the use of a glass electrode, a pH meter, or a color-changing indicator, the pH of aqueous solutions can be determined.

The pH of a solution is the negative log of its hydronium ion concentration. To calculate the pH of a solution, we can use the following equation:

pH = -log[H⁺]

Therefore, the pH of a solution with a hydronium ion concentration of 4.8 x 10⁻¹² is -log(4.8 x 10⁻¹²) = 11.32.

To know more about  pH meter, visit:

https://brainly.com/question/16017791

#SPJ1

complete the following bca table for the following reaction. 4.0 moles of silver nitrate is combined with an unknown amount of calcium bromide to produce two products in a double replacement reaction. name and provide the number of moles for each product.

Answers

4 moles of AgBr is produced

2 moles of Calcium nitrate is produced

What is the stoichiometry?

Stoichiometry is used in calculating the quantities of the reactants and products in a chemical reaction as well as identifying the limiting reactant are all part of this process.

The reaction equation is;

[tex]CaBr_{2} (aq) + 2 AgNO_{3} (aq) ---- > 2 AgBr (s) + Ca(NO_{3} )_{2} (aq)[/tex]

If 2 moles of [tex]AgNO_{3}[/tex] produces 2 moles of AgBr

4 moles of [tex]AgNO_{3}[/tex] will produce 4 * 2/2 = 4 moles of AgBr

If 2 moles of [tex]AgNO_{3}[/tex] produces 1 mole of  Calcium nitrate

4 moles of [tex]AgNO_{3}[/tex] will produce 4 * 1/2
2 moles of  Calcium nitrate

Learn more about moles:https://brainly.com/question/31597231

#SPJ1

I need the math to it to show how I got to the answer, please help

Answers

The volume (in liters) of ammonia, NH₃ produced from the reaction is 127 liters (option C)

How do i determine the volume of ammonia produced?

First, we shall determine the mole in 17 g of H₂. Details below:

Mass of H₂ = 17 grams Molar mass of H₂ = 2 g/mol Mole of H₂ =?

Mole = mass / molar mass

Mole of H₂ = 17/ 2

Mole of H₂ = 8.5 moles

Next, we shall determine the volume of H₂. Details below:

1 mole of hydrogen gas, H₂ = 22.4 Liters

Therefore,

8.5 moles of hydrogen gas, H₂ = (1.24 mole × 22.4 Liters) / 1 mole

8.5 moles of hydrogen gas = 190.4 liters

Finally, we shall determine the volume of ammonia, NH₃ produced. This is shown below:

N₂(g) + 3H₂(g) -> 2NH₃(g)

From the above equtaion,

3 liters of H₂ reacted with 2 liters of NH₃

Therefore

190.4 liters of H₂ will react = (190.4 liters × 2 liters) / 3 liters = 127 liters of NH₃

Thus, from the above illustration, we can conclude that the volume of ammonia, NH₃ produced  is 127 liters (option C)

Learn more about volume:

https://brainly.com/question/9614052

#SPJ1

10. How many moles are in 20 grams of Carbon (12 amu)?
11. How many moles are in 2.9 grams of Lithium (7 amu)?
12. How many moles are in 0.001 grams of Chlorine (35 amu)?
13. How many grams are in 10 moles of Beryllium (9 amu)?
14. How many grams are in 3.4 moles of Nitrogen (14 amu)?
15. How many grams are in 1.5 moles of Hydrogen (1 amu)?
16. How many atoms are in 10 moles of Helium?
17. How many atoms are in 0.003 moles of Neon?
18. How many atoms are in 2.7 moles of Sodium?
19. How many atoms are in 3.0 grams of Boron (9 amu)?
20. How many atoms are in 5.6 grams of Nitrogen?



i need help please for all of them

Answers

10. To calculate the number of moles in 20 grams of Carbon (12 amu), we need to use the formula:
moles = mass / molar mass

The molar mass of carbon is 12 g/mol. Substituting the given values:

moles = 20 g / 12 g/mol

moles = 1.67 mol

Therefore, there are 1.67 moles of Carbon in 20 grams.

11. To calculate the number of moles in 2.9 grams of Lithium (7 amu), we need to use the formula:
moles = mass / molar mass

The molar mass of Lithium is 7 g/mol. Substituting the given values:

moles = 2.9 g / 7 g/mol

moles = 0.414 mol

Therefore, there are 0.414 moles of Lithium in 2.9 grams.

12. To calculate the number of moles in 0.001 grams of Chlorine (35 amu), we need to use the formula:
moles = mass / molar mass

The molar mass of Chlorine is 35 g/mol. Substituting the given values:

moles = 0.001 g / 35 g/mol

moles = 2.86 x 10^-5 mol

Therefore, there are 2.86 x 10^-5 moles of Chlorine in 0.001 grams.

13. To calculate the number of grams in 10 moles of Beryllium (9 amu), we need to use the formula:
mass = moles x molar mass

The molar mass of Beryllium is 9 g/mol. Substituting the given values:

mass = 10 mol x 9 g/mol

mass = 90 g

Therefore, there are 90 grams of Beryllium in 10 moles.

14. To calculate the number of grams in 3.4 moles of Nitrogen (14 amu), we need to use the formula:
mass = moles x molar mass

The molar mass of Nitrogen is 14 g/mol. Substituting the given values:

mass = 3.4 mol x 14 g/mol

mass = 47.6 g

Therefore, there are 47.6 grams of Nitrogen in 3.4 moles.

15. To calculate the number of grams in 1.5 moles of Hydrogen (1 amu), we need to use the formula:
mass = moles x molar mass

The molar mass of Hydrogen is 1 g/mol. Substituting the given values:

mass = 1.5 mol x 1 g/mol

mass = 1.5 g

Therefore, there are 1.5 grams of Hydrogen in 1.5 moles.

16. To calculate the number of atoms in 10 moles of Helium, we need to use Avogadro's number:
number of atoms = moles x Avogadro's number

Substituting the given values:

number of atoms = 10 mol x 6.022 x 10^23 atoms/mol

number of atoms = 6.022 x 10^24 atoms

Therefore, there are 6.022 x 10^24 atoms in 10 moles of Helium.

17. To find the number of atoms in 0.003 moles of neon, we can use Avogadro's number which is 6.022 x 10^23 atoms per mole.
Number of atoms = 0.003 moles x 6.022 x 10^23 atoms/mole
Number of atoms = 1.8066 x 10^21 atoms

Therefore, there are approximately 1.8066 x 10^21 atoms in 0.003 moles of neon.

18. To find the number of atoms in 2.7 moles of sodium, we can use Avogadro's number again.
Number of atoms = 2.7 moles x 6.022 x 10^23 atoms/mole
Number of atoms = 1.62654 x 10^24 atoms

Therefore, there are approximately 1.62654 x 10^24 atoms in 2.7 moles of sodium.

19. To find the number of atoms in 3.0 grams of boron, we need to first find the number of moles of boron using its atomic mass. The atomic mass of boron is 10.81 g/mol.
Number of moles = 3.0 g / 10.81 g/mol
Number of moles = 0.2773 mol

Then, we can use Avogadro's number to find the number of atoms.

Number of atoms = 0.2773 mol x 6.022 x 10^23 atoms/mole
Number of atoms = 1.6684 x 10^23 atoms

Therefore, there are approximately 1.6684 x 10^23 atoms in 3.0 grams of boron.

20. To find the number of atoms in 5.6 grams of nitrogen, we need to first find the number of moles of nitrogen using its atomic mass. The atomic mass of nitrogen is 14.01 g/mol.
Number of moles = 5.6 g / 14.01 g/mol
Number of moles = 0.3997 mol

Then, we can use Avogadro's number to find the number of atoms.

Number of atoms = 0.3997 mol x 6.022 x 10^23 atoms/mole
Number of atoms = 2.4066 x 10^23 atoms

Therefore, there are approximately 2.4066 x 10^23 atoms in 5.6 grams of nitrogen

Hope this helps!

The compound NaOH is a base by all three of the theories we discussed
in class. However, each of the three theories describes what a base is in
different terms. Use your knowledge of these three theories to describe
NaOH as an Arrhenius base, a Brønsted-Lowry base, and a Lewis base.

Answers

Answer:

NaOH is a base through all 3 definitions of base: Arrhenius, Bronsted-Lowry, and Lewis.

Arrhenius

An Arrhenius base is defined as a compound that increases the OH⁻ concentration in an aqueous solution. In other words, Arrhenius bases are compounds that have an OH⁻ ion. NaOH does dissolve into Na⁺ + OH⁻, so it will increase the OH⁻ of a solution. This means the compound is an Arrhenius base.

Bronsted-Lowry

Bronsted-Lowry bases are defined as a species that can accept a proton. Remember that a proton can be shown as H⁺. As stated above, NaOH dissolves into Na⁺ + OH⁻. In this form, the OH⁻ can accept the H⁺ to create H₂O. Thus, NaOH is a Bronsted-Lowry base.

Lewis Base

Lewis bases are compounds that can donate an electron pair. The O in dissolved NaOH has 3 electron pairs, which is what causes the negative charge on OH⁻. The O is able to donate one of the electron pairs to another species during a reaction. So, NaOH is a Lewis base.

How many moles of ammonia would be required to react exactly with 0.470 moles of copper(I) oxide in the
following chemical reaction?
2 NH, (g) + 3 CuO (s) -> 3 Cu(s) + Na (8) + 3 H20 (g)

Answers

Answer: 0.313 mole of NH3

Explanation:

How many atoms are in 41.3 grams of Ag?

Answers

Explanation:

41.3 × (6.022 × 10²³)

248.7 × 10²³

2.487 × 10²⁵

Answer:

number of atoms = 2.31 × 10²³ atoms

Explanation:

To calculate the number of atoms in 41.3 grams of Ag (silver), we need to use the Avogadro's number (6.022 × 10²³ atoms/mol).

First, we need to find the number of moles of Ag in 41.3 grams:

moles of Ag = mass of Ag / molar mass of Ag
moles of Ag = 41.3 g / 107.87 g/mol
moles of Ag = 0.383 mol

Next, we can use the Avogadro's number to calculate the number of atoms:

number of atoms = moles of Ag x Avogadro's number

number of atoms = 0.383 mol x 6.022 × 10²³ atoms/mol

number of atoms = 2.31 × 10²³ atoms

Therefore, there are 2.31 × 10²³ atoms in 41.3 grams of Ag.

Calculate the number of valence electrons in methylene chloride, CH₂Cl₂.

Answers

Answer:

20 valence electrons

Explanation:

The number of valence electrons in carbon (C), hydrogen (H), and chlorine (Cl) are 4, 1, and 7, respectively. The number of total valence electrons (TVE) in CH₂Cl₂ is calculated as follows-

TVE in CH₂Cl₂ = valence electrons in C + 2(valence electrons in H) + 2(valence electrons in Cl)

= 4 + 2(1) + 2(7)

= 20

1. You need to take a medicine orally and want quick action. The medicine is available in the form of a compressed tablet or as a loose powder. Which form would give you the desired quick action? Why?

Answers

Compared to crushed pills, loose powder medications have a higher surface area, which allows for faster body absorption and disintegration, leading to a speedier effect.

What factors affect how quickly drugs dissolve from tablets?

The drug's surface area has a direct relationship with the dissolving rate. Higher dissolving rates may be attained by reducing the particle size since surface area grows as particle size decreases.

How can a tablet dissolve faster than it would otherwise?

Therefore, disintegration agents are added to formulations to encourage the breakdown of tablets into minute granules and their component particles. This enables a faster liberation of the drug particles from the tablet matrix, increasing the surface area for subsequent dissolving.

To know more about absorption visit:-

https://brainly.com/question/2496894

#SPJ1

What is the oxidation state of the underlined atom in the reaction:

Answers

The element with an underlined name has the oxidation state U2O74 in the specified compound state.

How do you calculate the oxidation number for non-chemists?

Each element's charge corresponds to its oxidation number in a binary ionic compound. Looking at the periodic chart will reveal the charge, which is determined by the element's group: Elements in group 1: +1 charge. components from group 2: +2 charge.

Carbon monoxide (CO), the only typical example of carbon in a +2 oxidation state, is a gas. Due to the ease with which carbon monoxide may be converted into carbon dioxide, which has a more thermodynamically stable oxidation state of +4, carbon monoxide is a powerful reducing agent.

learn more about oxidation state

https://brainly.com/question/25551544

#SPJ1

5. Given the following standard enthalpies of formation for the following substances,
H,O (1) = -285.8 kJ/mol
H2O (g) = -241.8 kJ/mol
KOH (aq)=-482.4 kJ/mol
KOH(s) =-425.8 kJ/mol
Determine the enthalpy of the reaction,
2 K(s) + 2 H20(1) - > 2 KOH (aq) + H2(g)
a.
b
-197 kJ/mol
d.
-280 kJ/mol
e.
-1538 kJ/mol
-368 kJ/mol
C
-393 kJ/mol

Answers

The enthalpy of the reaction is -393.2 kJ/mol. The answer is (C).

What is enthalpy?

Enthalpy of reaction (ΔHrxn) refers to the heat energy that is either absorbed or released during a chemical reaction, while the pressure remains constant. It is determined as the difference between the enthalpies of the products and the reactants, and enthalpy, in turn, refers to the heat energy stored within a substance.

Equation:

ΔHf°(H2O(l)) = -285.8 kJ/mol

ΔHf°(KOH(aq)) = -482.4 kJ/mol

ΔHf°(H2(g)) = 0 kJ/mol

ΔHf°(K(s)) = 0 kJ/mol

To calculate the enthalpy of the reaction, we first need to balance the equation:

The given equation is the balanced equation

ΔHrxn = [2ΔHf°(KOH(aq)) + ΔHf°(H2(g))] - [2ΔHf°(H2O(l))]

ΔHrxn = [2(-482.4 kJ/mol) + 0 kJ/mol] - [2(-285.8 kJ/mol)]

ΔHrxn = [-964.8 kJ/mol] - [-571.6 kJ/mol]

ΔHrxn = -393.2 kJ/mol

To know more about enthalpy, click here

https://brainly.com/question/13996238

#SPJ1

how does crushing the candy science.​

Answers

Although, a part of your question is missing, you might be referring to this full question "How does crushing a candy to smaller pieces affect its digestion?"

Crushing the candy into smaller pieces increases the surface area of the solvent which will result in the reduction of digestion or dissolution.

Digestion is the process in which food taken is broken down into smaller components that can be absorbed into the bloodstream. Digestion helps in converting food into molecules, like glucose so that the body can utilize that energy for its growth and development.

While Crushing the candy into smaller pieces, we are increasing the surface area of the solvent which will result in the reduction of digestion or dissolution of the candy. Thus, the larger the size of the pieces, the slower will be the process of digestion. This physical process in which large pieces of food are cut and crushed into smaller pieces is known as mechanical digestion.

To learn more about digestion;

https://brainly.com/question/16315420

The force that holds water molecules together in a raindrop is called.
OA. polar attraction
OB. magnetic attraction
OC. covalent bonding
OD. ionic bonding

Answers

A: Polar Attraction, because water molecules have a slightly positive charge on one end and a slightly negative charge on the other end, which causes them to be attracted to each other due to electrostatic forces.

What is Polar attraction?

Polar attraction is the attraction between two polar molecules. Polar molecules contain atoms with slightly different charges, resulting in a slightly positive end and a slightly negative end of the molecule. The attractive force that occurs between two polar molecules is the result of the positively charged end of one molecule being attracted to the negatively charged end of the other molecule. This type of attraction is known as a dipole-dipole interaction.

What are electrostatic forces?

Electrostatic forces are forces of attraction or repulsion between particles that are caused by their electrical charge. Electrically charged particles are either positively or negatively charged, and they exert a force on each other that is proportional to the magnitude of their charges, and inversely proportional to the square of the distance between them. Electrostatic forces can be used to explain phenomena such as the attraction of dust particles to surfaces and the clustering of ions in a solution.

To know more about dipole-dipole interaction, visit:

https://brainly.com/question/7545068

#SPJ1

Fill in the blanks to complete these sentences about rock characteristics.

A rock is an
natural
of minerals.

The
hardness
of a rock is a result of its mineral composition.

Most rocks contain more than one type of
.

Answers

The answers are:

accumulationhardnessmineralWhat is mineral?

A rock is a naturally occurring collection of minerals, and the kind and quantity of minerals it contains influence its hardness. Quartz, feldspar, mica, and calcite are just a few of the minerals that are present in all rocks. Additionally, rocks may include mineraloids and organic byproducts. Rocks are categorised based on their texture, mineral makeup, and additional features including colour, streak, lustre, and cleavage.

The three rocks are sedimentary, igneous, and metamorphic rocks. Rocks can be utilised in a variety of applications, including building, landscaping, and industrial activities.

A mineral assemblage forms a rock.A rock's mineral makeup determines how hard it is.The majority of rocks contain a variety of minerals.

To know more about metamorphic rocks, visit:

https://brainly.com/question/20475194

#SPJ1

A toy balloon has an internal pressure of 1.05 atm and a volume of 5.0 L. If the temperature where the balloon is released is 250 C, what will happen to the volume when the balloon rises to an altitude where the pressure is 0.65 atm and the temperature is –150 C?

Answers

The combined gas law, which links a gas's pressure, volume, and temperature, can be used to solve this issue. When the balloon reaches an altitude with a pressure of 0.65 atm and a temperature of -150 C, its capacity will fall to 4.9 L.

What's the current temperature?

The Centigrade scale, Celsius size, and Kelvin scale are the three scales that are most frequently used to measure temperature.Any item contains molecules that move or vibrate. Its temperature will rise when it is heated because the molecules are moving more quickly.A tool called a thermometer is used to measure it. the three units used to measure temperature.

To know more about ​temperature visit :

https://brainly.com/question/11464844

#SPJ1

Water rolls off a duck's back but thoroughly wets a head of human hair. What do these observations reveal about the chemical nature of these two sur- faces?

Answers

Explanation:

The observations that water rolls off a duck's back but thoroughly wets a head of human hair reveal that the surfaces of the duck feathers and human hair have different physical and chemical properties.

Duck feathers have a unique structure that helps them repel water. They are coated in a special oil that makes them hydrophobic, or water-repelling. The oil forms a layer on the surface of the feathers that prevents water from penetrating into the feather structure. Additionally, the feather structure is tightly packed and has a lot of surface curvature, which also helps to prevent water from sticking to the feathers. This is why water rolls off a duck's back.

In contrast, human hair does not have a hydrophobic coating, and its surface is relatively smooth. This means that water can easily stick to the surface of human hair and thoroughly wet it.

Overall, these observations reveal that the chemical nature of the surfaces of duck feathers and human hair are different, and that these differences have a significant impact on how they interact with water.

The substances in the table are combined, and Substance 1 loses 40 calories of heat. How many calories of heat will Substance 2
eventually gain?
A 0
B 20
C 40
D 80

Answers

Answer:

C: 40.

Explanation:

To answer this question, we need to use the concept of heat transfer and the law of conservation of energy, which states that energy cannot be created or destroyed, only transferred or transformed from one form to another.

When two substances are in contact, heat can flow from one substance to another until they reach thermal equilibrium (i.e., they have the same temperature). In this case, Substance 1 loses 40 calories of heat, which means it gives off 40 calories of heat to Substance 2. Therefore, Substance 2 will gain 40 calories of heat to reach thermal equilibrium.

Therefore, the correct answer is option C: 40.

In the following unbalanced combustion reaction how many grams of C8H18 will react with 24.78g of O2.

Answers

7.10 grams of C₈H₁₈ will react with 24.78 g of O₂ in this unbalanced combustion reaction.

What is meant by combustion reaction?

Type of chemical reaction that occurs when substance reacts with oxygen gas to produce energy in the form of heat and light is called combustion reaction .

To balance the combustion reaction: C₈H₁₈ + 12.5 O₂ -> 8 CO₂ + 9 H₂O

The coefficients show that 12.5 moles of  O₂ are needed to react with 1 mole of C₈H₁₈.

1 mole of  O₂ has a mass of 32 g, so 24.78 g of  O₂ is:

24.78 g / 32 g/mol = 0.774 mol of O₂

0.774 mol of  O₂ / 12.5 mol of  O₂/mol of C₈H₁₈ = 0.06192 moles of C₈H₁₈

0.06192 moles of C8H18 x 114.23 g/mol of C₈H₁₈ = 7.10 g of C₈H₁₈

Therefore, 7.10 grams of C₈H₁₈ will react with 24.78 g of  O₂ in this unbalanced combustion reaction.

To know more about combustion reaction, refer

https://brainly.com/question/13251946

#SPJ1

What is the molar solubility, S, of AgNO, if Ksp , = 6.00 × 10-4?

Answers

As a result, AgNO3 has a molar solubility of 0.0245 M.

what does molar solubility mean?

A compound's capacity to dissolve in a particular substance known as a solvent is indicated by a property termed molar solubility (M). It is specifically the most moles of a solute that may dissolve in one liter of solvent.

The Ksp (solubility product constant) formula, which is the product of the ion concentrations elevated to their stoichiometric coefficients in a saturated solution4, can be used to determine the molar solubility of AgNO3.

The formula for AgNO3 is AgNO3 → Ag+ + NO3-.

Therefore, Ksp = [Ag+][NO3-] = 6.00 × 10⁻⁴

Since AgNO3 dissociates completely in water, [Ag+] = [NO3-] = S (molar solubility).

Thus, Ksp = S² = 6.00 × 10⁻⁴.

Solving for S gives us S = √(Ksp) =√(6.00 × 10⁻⁴) = 0.0245 M⁴

To know more about molar solubility visit:

brainly.com/question/28170449

#SPJ1

Find reaction type and products for each equation please. FIRST CORRECT ANSWERS GETS BRAINLIEST HELP!!!

Answers

Reactant: C3H8 + O2 = Product:  CO2 + H2O

Reactant: Zn + HCI =  Product: ZnCl₂

Reactant: KI + Pb(NO3)2 = Product: KNO3 and PbI2

Reactant: Mg(CIO3)2 = Product: MgCl2 and O2

Reactant: F2 + KBr = Product: KF and Br2

What are chemical reactions?

Chemical reactions entail the conversion of one or more substances into novel species, thanks to the breaking and forging of chemical bonds.

Essentially, such transformations involve the reconfiguration of atoms and/or molecules, culminating in distinct chemical and physical attributes contrasting from those of the initial materials.

Learn about chemical reactions here https://brainly.com/question/11231920

#SPJ1

Other Questions
Find the magnitude of the emf E induced in the loop after exactly time 3.00 s has passed since the circumference of the loop started to decrease.Express your answer numerically in volts to three significant digits. Over the past five years a stock had returns of 21%, 13%, -8%, 0%, and 34%, respectively. What was the geometric average return on this stock WILL MARK BRAINLIEST!!!40 POINTS!!! A. Is energy exchanged between your system (the device) and its surroundings? B. Is matter exchanged between your system (the device) and its surroundings? C. Is it an open, closed or isolated system? Explain. 2. What is the law of conservation of energy? 3. Describe two examples of how the law of conservation of energy is demonstrated in the device you created. 4. In the lesson a thermos is presented as an example of an isolated energy system. How could you change the thermos into an open energy system? ______ enable those seeking a solution to communicate with one another with a degree of precision that otherwise might not be possible. Calculate the kinetic energy of a 0.300 kg baseball thrown at a velocity of 44.0 m/s How many planes of symmetry does a right pyramid with an isosceles triangle base have? Rank, in order, the evolution of a continental hot spot. A sorting algorithm is used to locate a specific item in a larger collection of data.TrueFalse lots of pointsQuestion refers to the excerpt below."And whereas great Quantities of the like Manufactures have of late been made and are daily increasing in the Kingdom of Ireland and in the English Plantations in America and are exported from thence to Forreigne Marketts heretofore supplyed from England which will inevitably sink the Value of Lands and tend to the ruine of the Trade and the Woollen Manufactures of this Realme Be it enacted by the Kings most Excellent Majesty by and with the Advice and Consent of the Lords Spirituall and Temporall and Commons in this present Parliament assembled and by the Authority of the same:That no Person or Persons shall directly or indirectly export out of or from the said Kingdom of Ireland into any Forreigne Realme States or Dominions other than the Parts within the Kingdom of England."Wool Act, 1699What did the Parliament of England's enactment of acts such as the Wool Act signify to the colonists? A weak attempt at economic equality An act of control and increasing taxation Endorsement of the superiority of Irish products Protection of British trade interests If alpha=0.05 1-tailed and the obtained result has a probability of 0.01 BUT it is in the opposite direction to that predicted by H1, we conclude by Connect In The Sparrow, what reason does the speaker give for why peopledont let the birds of peace and hope and love in? Question 52What is the most important step in the use of pesticides?a. use the right pesticide for the jobb. wear proper personal protective equipmentc. use the pesticide downwindd. read the label When running an MPI program with 10 processes that call MPI_Scatter using the default communicator, how many processes will receive a chunk of the data? "[T]he entire connotation of 'binge,"' writes Fallon, "a word tinged with the shame of eating an entire roll of cookie dough-Has changed into something prideful and brag-worthy" (par. 10). Do you agree? How/why has this change occurred? he U-shaped (or J-shaped) curve shows what? A coin is flipped at the start of every game to determine if Team A (heads) or Team B (tails) will get the ball first.Part A: Find the theoretical probability of a fair coin landing on heads.Part B: Flip a coin 14 times and record the frequency of each outcome. Be sure to include the frequency of each outcome in your answer. Then, determine the experimental probability of landing on heads and compare it to the theoretical probability. FCATOR EACH POLYNOMIAL. LOOK FOR A GCF FIRST.3x-3y Question 10(Multiple Choice Worth 5 points)(Identifying Functions LC)The graph represents a relation where x represents the independent variable and y represents the dependent variable.a graph with points plotted at negative 5 comma 1, at negative 2 comma 0, at negative 1 comma 3, at negative 1 comma negative 2, at 0 comma 2, and at 5 comma 1Is the relation a function? Explain. No, because for each input there is not exactly one output. No, because for each output there is not exactly one input. Yes, because for each input there is exactly one output. Yes, because for each output there is exactly one input. ____ describe what objects need to know about each other, how objects respond to changes in other objects, and the effects of membership in classes, superclasses, and subclasses. a. Aggregates c. Clustersb. Relationshipsd. Linkages The law requires insurers to be sufficiently (?)