4.1 g grams of PCl5 are produced from 3.5 g of Chlorine gas and excess P.
To solve this problem, we need to use stoichiometry to determine the amount of PCl5 produced from the given amount of Cl2.
First, we need to balance the chemical equation:
5Cl2(g) + 2P(s) → 2PCl5(s)
This tells us that 5 moles of Cl2 react with 2 moles of P to produce 2 moles of PCl5.
Next, we need to convert the given mass of Cl2 to moles:
3.5 g Cl2 ÷ 70.9 g/mol Chlorine gas= 0.0494 mol Cl2
Now we can use the mole ratios from the balanced equation to find the moles of PCl5 produced:
0.0494 mol Cl2 × (2 mol PCl5 ÷ 5 mol Cl2) = 0.0198 mol PCl5
Finally, we can convert the moles of PCl5 to grams:
0.0198 mol PCl5 × 208.2 g/mol PCl5 = 4.12 g PCl5
Therefore, the answer is B) 4.1 g.
Learn more about Chlorine here
https://brainly.com/question/14934764
#SPJ11
Question 69
The main source of childhood exposure to particulate pollution is:
a. Radon
b. Tobacco smoke
c. Burning coal
d. Natural gas
Option C, burning coal, is the primary cause of particle pollution exposure in children.
Developmental delays, cardiovascular problems, cognitive decline, and respiratory and cardiovascular disorders can all result from particulate pollution exposure. In addition to coal, industrial activities, wildfires, and vehicle emissions are additional sources of particle pollution. Children are very prone to the harmful effects of the particle air pollution like burning coal as we know that they have developing lungs that breathes more air. We have to prevent the children from getting exposed to the particulate pollution.
To know more about Air pollution, visit,
https://brainly.com/question/1187636
#SPJ4
Question 48
In terms of avoiding acid rainfall, in which of the areas would it be best to live?
a. Southern California
b. Upstate New York
c. Rocky Mountain Region of Colorado
d. Southern tip of Florida
In term of avoiding he acid rainfall, the best area to live would be option A, Southern California.
Acid rain is mixture of nitrides, sulfide and other harmful air pollutants. Then, like acid rain, these corrosive substances fall to the earth. Acid rain is more likely to occur in regions with large emissions of these pollutants and a climate that supports their development.
In comparison to the other places listed, Southern California should be one of the best places to avoid acid rain because of the environment of the Sothern California as it has lower rain levels and does not have a climate that supports pollutants. Living in Southern California would therefore be the greatest choice to prevent acid rain.
To know more about acid rain, visit,
https://brainly.com/question/22143130
#SPJ4
Hooke's law states that a linear relationship exists between stress and strain upto proportional limit.
True or False?
Yes, that's correct. Hooke's law is a fundamental principle of mechanics that states that within the elastic limit of a material, the stress applied to it is directly proportional to the strain it produces.
This means that if a material is subjected to a force (stress), it will deform (strain) in proportion to that force, as long as the deformation does not exceed a certain limit, known as the proportional limit.
Mathematically, Hooke's law can be expressed as:
stress = modulus of elasticity × strain
where the modulus of elasticity is a constant that depends on the material's properties and is unique to each material. The proportionality constant between stress and strain is valid only up to the proportional limit, beyond which the relationship becomes non-linear and the material exhibits plastic deformation.
learn more about stress here:
https://brainly.com/question/31366817
#SPJ11
#27. When two amino acids are joined via a peptide bond, what is the mass of the byproduct of the reaction?
When two amino acids join via a peptide bond, the mass of the byproduct, which is a water molecule, is approximately 18 atomic mass units.
When two amino acids are joined via a peptide bond, a byproduct is formed as a result of the reaction. This process, called dehydration synthesis, involves the removal of a water molecule (H2O) as the amino acids form the peptide bond.
To create a peptide bond, the carboxyl group (COOH) of one amino acid reacts with the amino group (NH2) of another amino acid. During this reaction, the carboxyl group loses a hydroxyl group (OH) while the amino group loses a hydrogen atom (H). The two amino acids are then linked by the peptide bond, and the released hydroxyl group and hydrogen atom combine to form a water molecule.
The mass of the byproduct, which is a water molecule, can be calculated by adding the atomic masses of its constituent atoms.
A water molecule consists of one oxygen atom and two hydrogen atoms. The atomic mass of oxygen is approximately 16 atomic mass units (amu), and the atomic mass of hydrogen is approximately 1 amu. Therefore, the total mass of a water molecule is:
1 oxygen atom × 16 amu/oxygen atom + 2 hydrogen atoms × 1 amu/hydrogen atom = 16 amu + 2 amu = 18 amu.
In summary, when two amino acids join via a peptide bond, the mass of the byproduct, which is a water molecule, is approximately 18 atomic mass units.
Know more about amino acids here:
https://brainly.com/question/28362783
#SPJ11
Select all the options that correctly relate electron transitions to changes of energy in the Bohr model of the hydrogen atom.A. The difference in energies between two different orbits is represented by ΔE = Efinal - Einitial.
B. An electron in an orbit close to the nucleus can absorb energy and move to a higher-energy obit that is farther from the nucleus
Both the options are correct. In the Bohr-model of the hydrogen atom, electrons can exist only in certain discrete energy levels or orbits. It will be around the nucleus.
A. The difference in energies between two different orbits is represented by ΔE = E_final - E_initial is correct.
B. An electron in an orbit close to the nucleus can absorb energy and move to a higher-energy orbit that is farther from the nucleus is also correct.
When an electron gets energy it will absorb it. Electron then can move from a lower-energy orbit to a higher-energy orbit farther from the nucleus. Like that electron loses energy also.
Electron can move from a higher-energy orbit to a lower-energy orbit closer to the nucleus by emitting energy. This energy will be in the form of photon. This photons will have characteristic frequency and wavelength.
The energy difference between two different orbits is given as ΔE = E_final - E_initial.
Learn more about Bohr-model:
https://brainly.com/question/3964366
#SPJ4
Question 56
The primary reason for fish disappearing from bodies of water becoming acidified is:
a. They are killed by the acidity of the water
b. They can't breathe in the low oxygen environment that is created
c. Their reproductive cycle is disrupted
d. They migrate to less acidic waters
a. They are killed by the acidity of the water. When bodies of water become acidified, the pH level drops and becomes too low for many species of fish to survive.
The acidified water can damage the fish's gills, making it difficult for them to breathe, and can also affect their ability to regulate their internal pH levels. This leads to the death of fish and the disappearance of their bodies from the affected bodies of water.When water becomes more acidic, it can interfere with the reproductive cycle of fish, making it difficult for them to reproduce successfully. This leads to a decline in fish populations in acidified bodies of water.
learn more about acidified Refer: https://brainly.com/question/28529228
#SPJ11
The bubbles formed in a positive multiple tube fermentation test are?
a. Oxygen
b. Chloramines
c. Hypochlorous acid
d. Carbon dioxide
The bubbles formed in a positive multiple tube fermentation test are most carbon dioxide (CO2).
What happens in the fermentation test?The multiple tube fermentation test is a microbiological test used to detect the presence of coliform bacteria in water or other samples. Coliform bacteria are a group of bacteria commonly found in the intestinal tract of humans and animals.
In the fermentation process, microorganisms break down sugars and other organic compounds to produce energy and various byproducts, including carbon dioxide.
The presence of gas (CO2) in the Durham tube of multiple tube fermentation test indicates that fermentation has occurred, and the organism being tested is capable of utilizing specific carbohydrate in the medium. Therefore, the correct answer is option d, carbon dioxide.
To know more about fermentation test, refer
https://brainly.com/question/31179283
#SPJ1
What factors promote SN2 in the NaI in acetone reaction?
The stabilizing the transition state, and reducing steric hindrance around the site of the leaving group.
Why are SN2 in the NaI in acetone reaction?The [tex]SN2[/tex] (substitution nucleophilic bimolecular) reaction between NaI and an alkyl halide in acetone solvent is promoted by several factors. These factors include:
Nucleophile strength: In the [tex]SN2[/tex] reaction, a strong nucleophile is required to attack the alkyl halide and displace the leaving group. Iodide ion[tex](I-)[/tex]is a strong nucleophile and can effectively attack the alkyl halide.Solvent polarity: The acetone solvent used in this reaction is polar, which helps to stabilize the transition state and facilitate the [tex]SN2[/tex] reaction.Leaving group ability: The leaving group in the alkyl halide should be a good leaving group to facilitate the [tex]SN2[/tex] reaction. In this case, the leaving group is a halogen atom [tex](e.g. Cl, Br)[/tex] which is a good leaving group.Steric hindrance: The degree of steric hindrance in the alkyl halide can affect the rate of the [tex]SN2[/tex] reaction. The reaction is faster when there is less steric hindrance around the site of the leaving group, which allows for easier access of the nucleophile to the carbon center.Overall, these factors promote the [tex]SN2[/tex] reaction between NaI and an alkyl halide in acetone solvent by enhancing the strength and reactivity of the nucleophile
Learn more about reducing steric
brainly.com/question/29401030
#SPJ11
How did early chemists determine which substances were elements?
a. By observing chemical reactions
b. By finding the atomic mass
c. By counting neutrons
d. By counting protons
Early chemists determined substances were elements by observing the chemical reactions. Option A is correct.
They will notify that certain substances, such as gold, copper, silver and lead, could not be broken down into simpler substances by chemical means. These substances were considered to be the elements, and their given symbols based on their names, such as Au for gold and Ag for silver.
The concept of the atomic mass and the discovery of the isotopes came much later, and were very important in refining our understanding of the elements and their properties. Counting protons and neutrons in the nucleus of an atom is now a common way to identify and characterize the different isotopes of an element, but it was not a method which is used by early chemists to identify elements.
Hence, A. is the correct option.
To know more about elements here
https://brainly.com/question/13025901
#SPJ4
nitrogen and hydrogen gas react to form ammonia gas. suppose you have 13.0 mol of n2 and 9.0 mol of h2 in a reactor. suppose as much of the n2 reacts. how much will be left
13.0 mol of N2 will be used up in the reaction, and there will be no N2 left over. Therefore, the answer to your question is that none of the N2 will be left over after the reaction is complete.
The balanced chemical equation for the reaction of nitrogen and hydrogen gas to form ammonia gas is:
N2 + 3H2 -> 2NH3
From this equation, we can see that one mole of N2 reacts with three moles of H2 to produce two moles of NH3.
So, if we have 13.0 mol of N2 and 9.0 mol of H2, the limiting reactant is N2 because it is in excess. This means that all of the H2 will react with the N2, and some of the N2 will be left over.
To calculate how much N2 is left over, we first need to determine how many moles of NH3 are produced. Since one mole of N2 reacts with three moles of H2 to produce two moles of NH3, we can use the mole ratio to calculate the number of moles of NH3 produced:
13.0 mol N2 x (2 mol NH3 / 1 mol N2) = 26.0 mol NH3
So, 26.0 mol of NH3 will be produced from the reaction of 13.0 mol of N2 and 9.0 mol of H2.
Next, we need to use the mole ratio again to determine how much N2 is left over. Since one mole of N2 reacts with two moles of NH3, we can use the mole ratio to calculate how many moles of N2 are needed to produce 26.0 mol of NH3:
26.0 mol NH3 x (1 mol N2 / 2 mol NH3) = 13.0 mol N2
This means that all 13.0 mol of N2 will be used up in the reaction, and there will be no N2 left over.
Therefore, the answer to your question is that none of the N2 will be left over after the reaction is complete.
Visit here to learn more about balanced chemical equation : https://brainly.com/question/28294176
#SPJ11
If a marathon race is 26.2 miles, what is the distance in kilometers? (Given: 1 mile = 1.61 kilometer)
The distance of a marathon race in kilometers is 42.1642.
To convert miles to kilometers, we need to multiply the distance by the conversion factor of 1.61. So, for a marathon race of 26.2 miles, we can multiply 26.2 by 1.61 to get the distance in kilometers.
26.2 miles x 1.61 kilometers/mile = 42.1642 kilometers
This conversion factor is important when dealing with international races or when communicating with people from different countries. While the United States commonly uses miles for measuring distance, many other countries use kilometers. It is important to be familiar with both systems of measurement and know how to convert between them. This can prevent misunderstandings and ensure accurate communication and planning.
You can learn more about the distance at: brainly.com/question/15172156
#SPJ11
Question 55
When a body of water becomes acidified, the first aquatic species to disappear are generally:
a. Bacterial decomposers
b. Phytoplankton
c. Fish d. Freshwater shrimp
The correct answer is b. Phytoplankton. When a body of water becomes acidified, it can affect the pH levels, making it difficult for certain species to survive.
Phytoplankton, which are important producers at the base of the food chain in aquatic ecosystems, are particularly sensitive to changes in pH and are often the first to disappear. This can have a cascading effect on the entire ecosystem, as other species that depend on phytoplankton for food may also struggle to survive. When a body of water becomes acidified, the pH level decreases significantly and the water becomes more acidic. This causes a disruption in the aquatic environment, with the most sensitive species being the first to suffer.
To learn more about acidified click here https://brainly.com/question/28529228
#SPJ11
1. For the hypothetical reaction A + 3 B → 2 C, the rate of appearance of C given by
∆[C]/∆t may be expressed as:
A. ∆[C]/∆t = ∆[A]/∆t C. ∆[C]/∆t = -2/3∆[B]/∆t
B. ∆[C]/∆t = 3/2∆[B]/∆t D. ∆[C]/∆t = -1/2∆[A]/∆t
For the reaction A + 3 B → 2 C, the rate of appearance of C can be related to the rate of disappearance of B using the stoichiometric coefficients, resulting in the equation ∆[C]/∆t = -2/3∆[B]/∆t. The correct answer is option C.
For the hypothetical reaction A + 3 B → 2 C, the rate of appearance of C, given by ∆[C]/∆t, can be related to the rate of disappearance of A and B by considering their stoichiometric coefficients. The rate of disappearance of A and B are -∆[A]/∆t and -∆[B]/∆t, respectively.
Using the stoichiometric coefficients, we can express the rate of appearance of C as:
∆[C]/∆t = (-1/2) × ∆[A]/∆t
= (-2/3) × ∆[B]/∆t
Thus, the correct option for this problem is: C. ∆[C]/∆t = -2/3∆[B]/∆t
For more such questions on rate of appearance, click on:
https://brainly.com/question/30578902
#SPJ11
: 1 59) Isotopes of what element are the stable, end products of both uranium decay series?
The isotopes of lead (specifically lead-206 and lead-208) are the stable end products of both uranium decay series.
This is because as uranium undergoes radioactive decay, it eventually transforms into lead through a series of intermediate isotopes. Lead-206 is the final product of the uranium-238 decay series, while lead-208 is the final product of the uranium-235 decay series. These isotopes are considered stable because they do not undergo radioactive decay themselves.
The final component of the "radium series" or "uranium series," the decay of 238U, is 206Pb. 206Pb will eventually result from the gradual decay of a given mass of 238U in a closed system. Although it takes a while because 234U has a half-life of 245,500 years, the synthesis of intermediate compounds finally reaches equilibrium. The ratio of 238U to 206Pb will progressively drop after this stabilised system is attained, while the ratios of the other intermediate products to one another stay constant.
To know more about isotopes of lead click here:
https://brainly.com/question/11910079
#SPJ11
A sample of methane gas (CH₂) having a volume of 2.80 L at 25 °C and 1.65 atm was mixed with a
sample of oxygen gas having a volume of 35.0 L and 1.25 atm. The mixture was then ignited to form carbon
dioxide and water. Calculate the volume of CO₂ formed at a pressure of 2.50 atm and a temperature of 125
°C.
Recommended Steps:
1. Write and Balance the chemical reaction equation
2. Determine the number of moles of each gas
3. Determine the limiting reactant (if there is one)
4. Perform the stoichiometry calculation for the reaction
5. Determine the final volume based on the number of moles, pressure and temperature requirements.
what’s the number of moles 105.9 g NaCl
the number of moles 105.9 g NaCl is 1.8121.
How does NaCl function?The substance our body needs to absorb and transfer tape is chloride (NaCl), also referred to as salt. keep the heart rate steady. keep the appropriate fluid balance.
How do NaCl and regular salt differ from one another?The chemical formula for both is NaCl. However, sodium chloride is just a salt that is composed of one metal and one non-metal i.e., sodium metal, and chlorine non-metal, whereas table salt is indeed a refined salt that contains 97 to 98% sodium chloride.
To know more about NaCl visit:
https://brainly.com/question/1550455
#SPJ1
What is the molar solubility, S , of AgCl in a solution that has [Cl−] = 2.0 × 10^−2M.
Ksp = 1.8 × 10^−10
The molar solubility of AgCl in a solution that has [Cl−] = 2.0 × 10^−2M is 9.0 × 10^−9 M.
The molar solubilityThe solubility product constant, Ksp, for AgCl is given as 1.8 × 10^−10 at a certain temperature. The expression for Ksp is:
Ksp = [Ag+][Cl−]
where [Ag+] is the concentration of Ag+ ions in the solution, and [Cl−] is the concentration of Cl− ions in the solution.
For AgCl, the dissociation reaction is:
AgCl(s) ⇌ Ag+(aq) + Cl−(aq)
Let the molar solubility of AgCl be S. Then, at equilibrium, the concentrations of Ag+ and Cl− ions in the solution will be S and 2.0 × 10^−2 M, respectively.
So, the equilibrium expression for Ksp is:
Ksp = [Ag+][Cl−] = S × 2.0 × 10^−2
Substituting the given values, we get:
1.8 × 10^−10 = S × 2.0 × 10^−2
S = (1.8 × 10^−10) / (2.0 × 10^−2) = 9.0 × 10^−9 M
Therefore, the molar solubility of AgCl in a solution that has [Cl−] = 2.0 × 10^−2M is 9.0 × 10^−9 M.
Learn more on solubility constant here https://brainly.com/question/7176737
#SPJ1
The formula for magnesium sulfate isA) MnS B) MgS C) MnSO3 D) MgSO4 E) MgSO3
The formula for magnesium sulfate is MgSO₄. Option D is correct.
Magnesium sulfate is an inorganic salt which consists of magnesium cations (Mg²⁺) and sulfate anions (SO₄²⁻). The formula for magnesium sulfate is derived from the combination of the chemical symbols for magnesium (Mg) and sulfate (SO₄), with the appropriate subscripts to indicate the ratio of atoms in the compound. The "4" in MgSO₄ indicates that there are four oxygen atoms in the sulfate ion.
Magnesium sulfate is commonly known as Epsom salt and it is used as a medication to treat conditions such as eclampsia, pre-eclampsia, and asthma. It can also be used as a laxative and to relieve muscle aches and pains.
Hence, D. is the correct option.
To know more about magnesium sulfate here
https://brainly.com/question/22370698
#SPJ4
Inspect the following SN2 reaction. What happens to the reaction rate in each of the following instances? (a)The leaving group is changed from Br-to I- (b) The solvent is changed from acetone to CH3CH2OH (c) The alkyl halide is changed from CH3(CH2)4Br to CH3CH2CH2CH(Br)CH3 (d) Theconcentration of CN- is increased by a factor of five ;and (e) The concentrations of both the alkyl halide and -CN are increased by a factor of five.
The SN2 reaction is a second-order nucleophilic substitution reaction where a nucleophile attacks a carbon atom with a leaving group. The reaction rate depends on several factors including the strength of the nucleophile, the leaving group, the solvent, and the concentration of the reactants.
In the following instances, the reaction rate will be affected in the following ways:
(a) If the leaving group is changed from Br- to I-, the reaction rate will increase. This is because I- is a better leaving group than Br- due to its larger size and weaker bond with carbon.
(b) If the solvent is changed from acetone to CH3CH2OH, the reaction rate will decrease. This is because CH3CH2OH is a polar protic solvent, which stabilizes the nucleophile and hinders its attack on the alkyl halide.
(c) If the alkyl halide is changed from CH3(CH2)4Br to CH3CH2CH2CH(Br)CH3, the reaction rate will decrease. This is because the bulkier alkyl halide hinders the approach of the nucleophile to the carbon atom, making it harder for the reaction to take place.
(d) If the concentration of CN- is increased by a factor of five, the reaction rate will increase. This is because the nucleophile is the limiting reagent in the reaction, and increasing its concentration will increase the frequency of successful collisions with the alkyl halide.
(e) If the concentrations of both the alkyl halide and -CN are increased by a factor of five, the reaction rate will increase. This is because increasing the concentrations of both reactants increases the frequency of successful collisions between them, leading to a higher reaction rate.
the reaction rate of an SN2 reaction is affected by several factors, including the leaving group, solvent, alkyl halide, and concentration of reactants. Understanding these factors is important in predicting and optimizing reaction rates.
to learn more about SN2 reaction
https://brainly.com/question/29589832
#SPJ11
A molecule that is made up of more than one type of atom is known as:
an element
an isotope
a compound
a subatomic particle
A molecule that is made up of more than one type of atom is known as a compound. Isotopes refer to atoms of the same element that have different numbers of neutrons.
Subatomic particles refer to the building blocks of atoms, including protons, neutrons, and electrons. A molecule that is made up of more than one type of atom is known as a compound. In contrast, an isotope refers to different forms of the same element with varying numbers of neutrons, while subatomic particles are the smaller components that make up an atom, such as protons, neutrons, and electrons. An element consists of only one type of atom.
To know more Isotopes please vist :-
https://brainly.com/question/11680817
#SPJ11
A molecule that is made up of more than one type of atom is known as a compound. Isotopes refer to atoms of the same element that have different numbers of neutrons.
Subatomic particles refer to the building blocks of atoms, including protons, neutrons, and electrons. A molecule that is made up of more than one type of atom is known as a compound. In contrast, an isotope refers to different forms of the same element with varying numbers of neutrons, while subatomic particles are the smaller components that make up an atom, such as protons, neutrons, and electrons. An element consists of only one type of atom.
To know more Isotopes please visit:-
brainly.com/question/11680817
#SPJ4
The photoelectron spectra of the 1s electrons of two isoelectronic species, Ca2+ and Ar, are above. Which of the following correctly identifies the species associated with peak X and provides a valid justification?
Select one:
a. Ar, because it has completely filled energy levels
b. Ca2+, because its nucleus has two more protons than the nucleus of Ar.
c. Ar, because its radius is smaller than the radius of Ca2+
d. Ca2+, because its nuclear mass is greater than that of Ar
The correct answer is b. Ca2+, because its nucleus has two more protons than the nucleus of Ar.
This is because the peak X in the photoelectron spectra represents the ionization energy required to remove the 1s electron from the innermost shell of the isoelectronic species. Since both Ca2+ and Ar have the same number of electrons, the difference in peak X can be attributed to the difference in their nuclear charge.
Ca2+ has two more protons in its nucleus compared to Ar, which results in a greater nuclear charge and a higher ionization energy required to remove the 1s electron. Therefore, peak X is associated with Ca2+. b. Ca2+, because its nucleus has two more protons than the nucleus of Ar.
To learn more about nuclear charge click here
brainly.com/question/15874485
#SPJ11
An aspirator uses the laminar flow of water through a tube to pull air outside the tube into the tube. Use Bemoulli's principle to explain how an aspirator works.
Answer:
as water moves into a more narrow space and accelerates causing air to speed up with the tube.
hope this helps ;)
Which is a closed fire line?
a.) Broken fire hydrant or pipeline that feeds a fire hydrant
b.) Unmetered connection for a fire protection system
c.) Closed valve to a fire hydrant
d.) Closed valve to a fire sprinkler system
Closed valve to a fire sprinkler system is a closed fire line. Option D is correct
A fire sprinkler system is a network of water pipes, valves, and sprinkler heads installed in a building to quickly extinguish or control fires. The system is designed to automatically activate when a certain temperature or amount of heat is detected, and water is released through the sprinkler heads to suppress or extinguish the fire.
Fire sprinkler systems are an important aspect of fire protection in buildings and can greatly reduce the risk of property damage and loss of life in the event of a fire.
To know more about Hydrogen sulfide here
https://brainly.com/question/28819363
#SPJ1
Protons may determine the identity of an element, but _________________ rule its reactivity.
Protons may determine the identity of an element, but it is the electrons that rule its reactivity. The number of protons in an atom's nucleus gives it a unique atomic number, which defines its place on the periodic table and determines its fundamental properties.
It is the number and arrangement of electrons in an atom's outermost energy level that determines its chemical behavior. This is because electrons are involved in chemical reactions, forming and breaking chemical bonds to create new substances.
Atoms with full outer electron shells tend to be stable and unreactive, while those with partially filled shells are more likely to form chemical bonds in order to achieve a stable configuration. Elements that are close to each other on the periodic table often have similar outer electron configurations and therefore exhibit similar chemical properties.
Understanding the reactivity of elements is essential in many areas of chemistry, including designing new drugs, creating new materials, and developing sustainable energy sources.
to learn more about Protons
https://brainly.com/question/148809
#SPJ11
Which step of the Calvin cycle requires no extra energy? - chemiosmosis of ATP - generation of G3P - generation of NADPH - splitting of water - carbon fixation by rubisco - regeneration of RuBP
Carbon fixation by Rubisco requires no extra energy. This is the first step of Calvin's cycle.
In the Calvin cycle, there are three steps involved:
1. Carbon Fixation: In this step, the carbon molecule is fixed that is the Carbon atom from carbon dioxide is fixed by conjugation with RuBP. In this step, no ATP molecules are required.
2. Reduction: This step involves the reduction of the fixed carbon, into the formation of carbohydrates. This step requires 2 ATP for each G3P molecule.
3. Regeneration of RuBP: This step is used to regenerate the used RuBP molecule used in the first step which is the fixation of carbon. This step requires one ATP per G3P molecule.
Splitting of water and chemiosmosis of ATP aren't steps of the Calvin cycle.
Learn more about the Calvin cycle:
brainly.com/question/920840
#SPJ4
Question 72 Marks: 1 The type of water that makes it difficult to produce suds or to rinse laundry, dishes or food equipment isChoose one answer. a. soft water b. hard water c. spring water d. distilled water
The type of water that makes it difficult to produce suds or to rinse laundry, dishes or food equipment is hard water. Therefore, the correct answer is (b) hard water.
Hard water contains high levels of dissolved minerals, such as calcium and magnesium ions, which can interfere with the formation of suds and make it difficult to rinse soap or detergent from surfaces. Soft water, on the other hand, has a low concentration of dissolved minerals and is more effective at producing suds and rinsing away soap or detergent. Also, it lathers easily with soap and rinses away cleanly. Spring water and distilled water are both types of purified water that do not contain significant amounts of dissolved minerals, but they may not be suitable for all purposes due to their lack of minerals and other dissolved substances.
To know more about hard water, please click on:
https://brainly.com/question/28178305
#SPJ11
the amount of energy required to break a covalent bond between atoms
(structural formula, Single covalent bond, polyatomic ion, bond dissociation energy, coordinate covalent bond)
The amount of energy required to break a covalent bond between atoms single covalent bond.option (b)
In a single covalent bond, two atoms share one pair of electrons in order to achieve a stable outer electron configuration. This type of bond is typically formed between nonmetallic elements and is represented in structural formula by a single line between the two atoms.
The strength of a covalent bond is measured by its bond dissociation energy, which is the amount of energy required to break the bond and separate the atoms. Single covalent bonds have a lower bond dissociation energy than double or triple covalent bonds, meaning they are easier to break.
Another type of covalent bond is a coordinate covalent bond, in which both electrons in a shared pair come from the same atom.
Learn more about single covalent bond
https://brainly.com/question/19382448
#SPJ4
Full Question: The amount of energy required to break a covalent bond between atoms
structural formula, Single covalent bond, polyatomic ion, bond dissociation energy, coordinate covalent bondWhich statement identifies how the particles of gases affect one another’s motion?
They affect one another’s motion only if there are forces of attraction between them.
They do not affect one another’s motion.
They affect one another’s motion only when they collide.
The point of view outlines the way the movement of gas molecules affects one another. They only change each other's movement when they collide.
Which of these claims regarding gas particles is correct?Solution in detail. The proper response is Gases possess neither a fixed volume nor a fixed shape. Gases have no clear shape and dimension because their molecules are so widely apart when compared to solid or liquid molecules.
Which of these statements best defines the motion of liquid particles?Its particles are near together and move randomly, hence the solution is e). Liquid particles are close to one another and move haphazardly. This is in contrast to solids, wherein particles do not move, and gases, wherein the particles are widely apart.
To know more about molecules visit:
https://brainly.com/question/30465503
#SPJ1
Question 9
The factor used to determine the bromine residual with the chlorine test kit (DPD):
a. multiply chlorine residual by 2.25
b. multiply chlorine residual by 4
c. divide chlorine residual by 4
d. divide chlorine residual by 2.5
The factor used to determine the bromine residual with the chlorine test kit (DPD) is to multiply the a. chlorine residual by 2.25.
To calculate the bromine residual in a water sample using the DPD chlorine test kit, you first need to measure the chlorine residual. Once you have obtained the chlorine residual, you can use the conversion factor of 2.25 to convert the chlorine residual to bromine residual. This is done because bromine has a different molecular weight and reactivity compared to chlorine, and the conversion factor helps to account for these differences.
By using this factor, you can accurately determine the bromine residual in your sample, which is essential for maintaining water quality and ensuring that the water is safe for use. The factor used to determine the bromine residual with the chlorine test kit (DPD) is to multiply the a. chlorine residual by 2.25.
learn more about water quality here:
https://brainly.com/question/8920269
#SPJ11
Why did we add laemmli buffer to the fish sample?
Answer:
To linearize the proteins
Explanation:
Laemmli buffer, which contains SDS, was added to fish samples to linearize the proteins by breaking up secondary and tertiary protein structure, ensuring that proteins will only move by size. Also, coats proteins to be electrically charged so it will migrate down the gel