chemicals such as ozone or sulfate/nitrate, which are transformed in the presence of sunlight, water, oxygen or other compounds are known as:

Molarity x volume = 0.585 M x 39.29 mL = 22.984 mmol

At half equivalence point, half of base is neutralized.

Amount of methylamine neutralized: 22.984 /2 = 11.492 mmol

Volume = moles/ molarity = 11.492mmol/0.644M = 17.84mL

We divide the total number of moles of solute by the sum of the solution's liters to determine the molarity of the solution. A chemical species' concentration in a solution, specifically the volume of a solute per unit volume of solution, is measured by its molar concentration. The number of moles per liter is the most often used unit for molarity in chemistry.

learn more about molarity here:

https://brainly.com/question/17138838

#SPJ4

The probability density goes to zero al0ng the 'XY' and 'XZ' planes. Therefore, options A:  XY and B:  XZ are correct.

The probability density is a function for which the integral is calculated to find probabilities associated with a continuous random variable. The graph of the probability density is a curve above the horizontal axis that indicates a total area, between itself and the axis, of 1.

Along XY and XZ planes, the probability density goes to zero. Zero probability density means zero chance of noticing the particle in that state.

You can learn more about probability density at

https://brainly.com/question/28705601

#SPJ4

There are a few different activities that a student can perform to demonstrate the formation of soil through chemical processes. Here are two examples:

Soil acidification experiment: In this activity, students can observe the effect of acid rain on soil pH. They can set up a controlled experiment using soil samples and different concentrations of an acidic solution (such as vinegar). They can measure the pH of the soil before and after adding the acidic solution and observe any changes in the pH over time. This can help students understand how chemical processes, such as the reaction of acid rain with minerals in the soil, can alter the chemical properties of soil.

Soil mineralization experiment: In this activity, students can observe the formation of soil minerals through the process of weathering. They can set up a controlled experiment using different types of rocks and soil samples, and expose them to various weathering agents (such as water, sunlight, and temperature changes). They can then observe any changes in the composition of the rocks and soil over time, and compare the results to see which weathering agents are most effective at breaking down the rocks and forming soil minerals. This can help students understand how chemical processes, such as the reaction of water and minerals in the rock, can lead to the formation of soil over time.

To know more about soil formation visit :

https://brainly.com/question/545586?referrer=searchResults

#SPJ4

There are a few different activities that a student can perform to demonstrate the formation of soil through chemical processes. Here are two examples:

Soil acidification experiment: In this activity, students can observe the effect of acid rain on soil pH. They can set up a controlled experiment using soil samples and different concentrations of an acidic solution (such as vinegar). They can measure the pH of the soil before and after adding the acidic solution and observe any changes in the pH over time. This can help students understand how chemical processes, such as the reaction of acid rain with minerals in the soil, can alter the chemical properties of soil.

Soil mineralization experiment: In this activity, students can observe the formation of soil minerals through the process of weathering. They can set up a controlled experiment using different types of rocks and soil samples, and expose them to various weathering agents (such as water, sunlight, and temperature changes). They can then observe any changes in the composition of the rocks and soil over time, and compare the results to see which weathering agents are most effective at breaking down the rocks and forming soil minerals. This can help students understand how chemical processes, such as the reaction of water and minerals in the rock, can lead to the formation of soil over time.

To know more about soil formation visit :

brainly.com/question/545586?referrer=searchResults

#SPJ4

Neither of the two systems on the right, upland or lowland, is characterized by a stable equilibrium.

Uplands and lowlands are parts of plains that are classified based on their height above sea level. Lowlands are usually below 200 m (660 ft), while highlands range from 200 m (660 ft) to 500 m (1,600 ft).

Upland soils have a sandy loam texture, but vary in rock and organic matter content depending on the location of the landscape. Upland soils develop on top of moraine deposits of base-rich volcanic rock and support orthotic, brunisolein, or dark gray rubisol.

The Lowland series consists of very deep and well-drained soils formed by great volcanic and slope flooding. These soils are found in fans, mountains and hills. The slope is 4-60%.

For more information on Uplands and lowlands plains , visit :

https://brainly.com/question/28648259

#SPJ4

Answer:

b. h and o are likely to form covalent bond

An electron will not posses  the quantum numbers n = 1, l = 1, ml = 1.

Quantum numbers may be the number sequence utilized to express the location and velocity of an electron within an atom. The primary, azimuthal, magnetic, as well as spin quantum numbers are just the four types of quantum numbers.

Wolfgang Pauli established the Pauli Exclusion Principle in 1926, which states that each electron has a special combination of quantum numbers. In other words, the values of n, l, ml, and ms cannot be like for pair of electrons.

-- The given question is incomplete, the complete question is:

"An electron cannot have the quantum numbers__"n = ________, l = ________, ml = ________.

A) 2, 0, 0

B) 2, 1, -1

C) 3, 1, -1

D) 1, 1, 1

E) 3, 2, 1" --

To know more about quantum numbers here

https://brainly.com/question/16979660

#SPJ4

Answer:

Temperature <3

Explanation:

Since it's use to measure kinetic energy, have a nice day! :)

The NMDA receptor is unusual in that it is voltage-dependent and neurotransmitter- dependent.

N-methyl-D-aspartate receptors (also known as NMDA receptors or NMDARs) are glutamate receptors and ion channels found in neurons. The NMDA receptor is one of three ionotropic glutamate receptors, the other two being the AMPA and kainate receptors. Depending on its subunit composition, its ligands are glutamate and glycine (or D-serine). However, ligand binding is usually not sufficient to open the channel, as it can be blocked by Mg2+ ions, which are removed only when the neuron is sufficiently depolarized.

Functional NMDA receptors are heterotetramers composed of two GluN1 subunits and usually two GluN2 subunits. There are one GluN1, four GluN2, and two GluN3 subunits encoding genes, and each gene can generate multiple splice variants. NMDA receptors regulate the development of neuron-specific excitability through cell-autonomous mechanisms. The maturation of neuronal and synaptic functions during childhood is essential for neural circuit and behavioral development.

To learn more about NMDA receptor, here

https://brainly.com/question/12897517

#SPJ4

The pressure inside the tank would be approximately 308 atm if it were left outside in the sun at a temperature of 37C.

The pressure inside the tank will increase if the temperature increases. This is because the oxygen molecules in the tank will have more energy and will collide with the walls of the tank more frequently, resulting in higher pressure.

To calculate the new pressure, you can use the ideal gas law, which states that the pressure of a gas is directly proportional to its temperature and the number of molecules present (assuming the volume is constant).

So, the new pressure can be calculated using the following equation:

P1/T1 = P2/T2

Where:

Solving for P2, we get:

P2 = (P1 * T2) / T1

= (204 atm * 37C) / 23C

= approximately 308 atm

So the pressure inside the tank would be approximately 308 atm if it were left outside in the sun at a temperature of 37C.

It's worth noting that this calculation assumes that the gas in the tank is an ideal gas, which means it follows the ideal gas law perfectly. In reality, the behavior of gases can deviate from the ideal gas law due to the presence of intermolecular forces, and the pressure in the tank may not exactly match the value calculated using the ideal gas law.

To know more about pressure visit :

https://brainly.com/question/21611721?referrer=searchResults

#SPJ4

The pressure inside the tank would be approximately 308 atm if it were left outside in the sun at a temperature of 37C.

The pressure inside the tank will increase if the temperature increases. This is because the oxygen molecules in the tank will have more energy and will collide with the walls of the tank more frequently, resulting in higher pressure.

To calculate the new pressure, you can use the ideal gas law, which states that the pressure of a gas is directly proportional to its temperature and the number of molecules present (assuming the volume is constant).

So, the new pressure can be calculated using the following equation:

P1/T1 = P2/T2

Where:

P1 is the initial pressure (204 atm)

T1 is the initial temperature (23C)

P2 is the final pressure (what we want to find)

T2 is the final temperature (37C)

Solving for P2, we get:

P2 = (P1 * T2) / T1

= (204 atm * 37C) / 23C

= approximately 308 atm

So the pressure inside the tank would be approximately 308 atm if it were left outside in the sun at a temperature of 37C.

It's worth noting that this calculation assumes that the gas in the tank is an ideal gas, which means it follows the ideal gas law perfectly. In reality, the behavior of gases can deviate from the ideal gas law due to the presence of intermolecular forces, and the pressure in the tank may not exactly match the value calculated using the ideal gas law.

To know more about pressure and temperature relation visit :

https://brainly.com/question/29460007?referrer=searchResults

#SPJ4

The mass of an electron in atomic mass units is 0.000549 u

A negatively charged subatomic particle known as an electron can either be free or attached to an atom which is not bound. One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons.

The atomic mass unit (AMU), which is a unit of mass used to express the masses of atoms and molecules, should be noted. The mass of an electron in atomic mass units is 0.000549 u.  In physics and chemistry, this unit is frequently used to denote the masses of atoms, molecules, and subatomic particles like protons, neutrons, and electrons. This value is based on the most precise measurements of the mass of the electron available.

Read more about electron on:

https://brainly.com/question/28420589

#SPJ4

Contrary to kegend, caneks di bit store water in their humps, which actually consist of large fat deposits. These fat deposits serve as a source of water because oxidation of fats releases metabolic water.

During the oxidation of organic substances (fats) releases metabolic water along with release of energy which will be explained with the example below

For example –  

Oxidation of one mole of Palmitic acid (C16H32O7) acid releases 146 mole of H2O. In Tri palmitoyl glycerol (fat C51H98O6) , there are 3 palmitic acid residues connected to glycerol molecule via ester bonds.

The equation of Oxidation of Palmitoyl CoA will be as follows;

palmitoyl-CoA + 23O2 + 108Pi + 108 ADP => 88nCoA + 108 ATP + 16CO2 + 23 H2O

To look more about fats click here

brainly.com/question/18934340

#SPJ4

The reaction that shows the combustion of methane is given by;

[tex]CH_{4} (g) + 2O_{2} (g) --------- > CO_{2}(g) + 2H_{2}O(g)[/tex]

We know that a combustion reaction is the kind of reaction that occurs when a substance is burnt in oxygen. We know that the burning of a substance on oxygen would lead to the oxidation of the product.

In the case of an organic compound like methane, when the substance has been burnt in oxygen, the products of the reaction are now carbon dioxide and water. This are the oxidation products of the combustion.

Learn more about combustion reaction:https://brainly.com/question/3588292

#SPJ1

The statement 'reactive oxygen intermediates and reactive nitrogen intermediates produced by phagocytic cells are effective in killing invading microorganisms' is true.

Phagocytic cells are the kind of cells that consume or destroy microorganisms by producing substances that are harmful to them, according to the study of biology.

The phagocytic cells produce oxygen and nitrogen intermediates, and these intermediates are reactive enough to bind to the chemicals in the microbe and inhibit their function. The microorganism dies when its activities are impeded to the point where it is unable to carry out the fundamental functions of life. Thus, the above statement is accurate.

To learn more about phagocytic cells, visit the link below:

brainly.com/question/29832465

#SPJ4

The right response, according to the definition of the heat of vaporization, is that 52.8 kJ is required to totally evaporate 23.4 g of water.

40.6 kJ/mole is the heat of vaporization for water at its boiling point. In other words, 40.6 kJ of energy is needed to convert a mole of liquid water into a mole of gas at a constant temperature.

The amount of mass that a substance holds in one mole is known as its molar mass. The water in this instance has a molar mass of 18 g/mol. The following formula can be used to determine how many moles 23.4 g of the chemical contains:

[tex]23.4 grams x\frac{1 mole}{18 grams} = 1.3 moles[/tex]

Then you can use the rule of three as follows: How much heat of vaporization is needed to vaporize 1.3 moles of water if 1 mole of water costs 40.6 kJ?

[tex]heat = \frac{1.3 moles * 40.6kJ}{1 mole}[/tex]

52.78 kJ 52.8 kJ = heat

To learn more about vaporization, refer:-

https://brainly.com/question/14480429

#SPJ4

The process that is responsible for moving molecules from an area of high concentration to an area of low concentration is diffusion. The part of the circulatory system in which this happen is the alveoli.

Diffusion is a passive process of transport. A single substance tends to move from an area of high concentration to an area of low concentration until the concentration is equal across the space.

For example, someone is opening a bottle of perfume in a room filled with people. The perfume is at its highest concentration in the bottle and is at its lowest at the edges of the room. The perfume vapor will diffuse, or spread away, from the bottle, and gradually, more and more people will smell the perfume as it spreads.

In a process called diffusion, oxygen moves from the alveoli to the blood through the capillaries (tiny blood vessels) lining the alveolar walls.

To look more about diffusion click here

brainly.com/question/29787215

#SPJ4

Answer: the constant process of photosythesis

Explanation:

it say in the etxt book

There are several activities that a student can perform to show the formation of soil through chemical processes. Here are two examples:

Soil pH experiment: In this activity, the student can measure the pH of soil samples collected from different locations or layers. The pH of the soil is an indicator of the soil's acidity or alkalinity, which is influenced by chemical processes such as the breakdown of organic matter and the weathering of minerals. By comparing the pH of different soil samples, the student can observe how chemical processes can affect the properties of soil.

Soil horizons experiment: In this activity, the student can create a soil profile by layering soil samples collected from different depths in a jar or container. The student can then observe the different layers, or horizons, that form in the soil profile over time. These horizons are formed through a variety of chemical processes, including the weathering of minerals, the breakdown of organic matter, and the leaching of nutrients. By observing these horizons, the student can see how chemical processes contribute to the formation and development of soil.

It's important to note that these are just a couple of examples, and there are many other activities that a student can perform to demonstrate the formation of soil through chemical processes.

To know more about soil formation visit :

https://brainly.com/question/545586?referrer=searchResults

#SPJ4

There are several activities that a student can perform to show the formation of soil through chemical processes. Here are two examples:

Soil pH experiment: In this activity, the student can measure the pH of soil samples collected from different locations or layers. The pH of the soil is an indicator of the soil's acidity or alkalinity, which is influenced by chemical processes such as the breakdown of organic matter and the weathering of minerals. By comparing the pH of different soil samples, the student can observe how chemical processes can affect the properties of soil.

Soil horizons experiment: In this activity, the student can create a soil profile by layering soil samples collected from different depths in a jar or container. The student can then observe the different layers, or horizons, that form in the soil profile over time. These horizons are formed through a variety of chemical processes, including the weathering of minerals, the breakdown of organic matter, and the leaching of nutrients. By observing these horizons, the student can see how chemical processes contribute to the formation and development of soil.

It's important to note that these are just a couple of examples, and there are many other activities that a student can perform to demonstrate the formation of soil through chemical processes.

To know more about soil formation visit :

brainly.com/question/545586?referrer=searchResults

#SPJ4

The half-life for the radioactive decay of plutonium-239 is 24,000 years. 1.896 x 10⁶ years it will take for one mole of this radioactive material to decay.

Half life of plutonium-239 = 24,000 years

Number of years of one-mole material decay = ?

For this, we will use the following equation

k = 0.693 ÷ t 1/2

k = 0.693 ÷ 24000 years

k = 0.000028875

Now find it for 1 atom

n = 6.023 x 10²³ atoms which is equal to 1 mole

There for n-x = 1

now

t = ( 1 ÷ k) × ln( n ÷ n-x)

t = ( 1 ÷ 0.000028875) × ln( 6.023 x 10²³ ÷ 1)

t = 1.896 x 10⁶ years

You can also learn about Half life from the following question:

https://brainly.com/question/24710827

#SPJ4

The thermodynamic equilibrium constant In a chemical equilibrium, K is the appropriate quotient of species activities. At normal temperatures and pressures, an activity cannot be very many orders of magnitude more than one.

The definition of thermodynamic properties is "system characteristics that can specify the state of the system." Some constants, like R, are not attributes since they do not describe the state of a system. Thermodynamics states that the conversion of diamond to graphite occurs spontaneously and is favourable. However, this reaction moves extremely slowly because kinetics, not thermodynamics, regulates it. As a result, diamond is thermodynamically unstable but kinetically stable. An axiomatic idea in thermodynamics is the concept of equilibrium. One thermodynamic system's internal state, or a relationship between numerous thermodynamic systems, is what it is.

Learn more about Thermodynamics here

https://brainly.com/question/1368306

#SPJ4

Answer:

Compounds are substances composed of two or more elements chemically combined that can be separated into simpler substances only by chemical means. Water, for example, is a compound because pure water is composed of only H2O molecules.

Pls choose me as brainliest!

Answer

All of the above are the routes of chemical exposure to the body.

There are 3 routes  of chemical  exposure and pollutants:

inhaling

absorption

ingesting

One is  exposed to chemicals and pollutants when one  inhale (breathe in).  This number can be much higher for infants and children. The chemicals and pollutants you inhale can end up in your lungs and blood stream.

Absorption

One can be exposed to chemicals and pollutants by coming into contact with them through your skin and eyes. These organs can be more sensitive to chemicals and may react more quickly than the rest of your body.

Ingesting

One is exposed to chemicals and pollutants when you eat and drink. Chemicals and pollutants are found in both our food and water sources.

Learn more about chemical exposure,here:

https://brainly.com/question/29797570

#SPJ2

The noble gas core that would be used when writing the ground state electron configuration for magnesium is Ne.

A noble gas that precedes the elements in the periodic table. We write the noble gas configuration by writing the valence electrons followed by the noble gas nucleus. They are called noble gases because they are very majestic and generally do not react to anything.

Noble gases are colorless odorless tasteless and non-flammable under normal conditions. They were called group 0 in the periodic table because they were believed to have zero valences, meaning that the atoms cannot combine with atoms of other elements to form compounds. It is very inert because the valence shell is filled.

Learn more about Noble gas here:- https://brainly.com/question/13715159

#SPJ4

22.7 liters approx volume of hydrogen gas is produced when 96.7 g of sodium reacts completely according to the following reaction at 25 degree C and 1 atm.

The chemical equation for the reaction is:

2Na(s) + 2H2O(l) -> 2NaOH(aq) + H2(g)

To calculate the volume of hydrogen gas produced, we first need to determine the number of moles of hydrogen produced. We can do this by using the molar mass of hydrogen and the mass of sodium that reacts. First, we convert the mass of sodium from grams to moles:

49.7 g Na / 22.99 g/mol = 2.17 mol Na

Since the chemical equation tells us that 2 mol of Na produce 1 mol of H2, we can use the mole ratio to calculate the number of moles of hydrogen produced:

2.17 mol Na * (1 mol H2 / 2 mol Na) = 1.09 mol H2

Next, we use the ideal gas law to calculate the volume of hydrogen gas produced at a temperature of 25 °C and a pressure of 1 atm:

V = (n * R * T) / P

where V is the volume of the gas, n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and P is the pressure.

Putting values, we get:

V = (1.09 mol * 8.31 J/mol*K * 298 K) / 1 atm

= 22.7 L

So, the volume of hydrogen gas produced is approximately 22.7 liters.

It's important to note that this calculation assumes that the reaction goes to completion and that the hydrogen gas behaves as an ideal gas. In real-world situations, these assumptions may not always hold, so the actual volume of hydrogen gas produced may be different.

To know more about hydrogen gas please refer: https://brainly.com/question/12745309

#SPJ4

Question - What volume of hydrogen gas is produced when 49.7 g of sodium reacts completely according to the following reaction at 25 °C and 1 atm?

2Na(s) + 2H2O(l) -> 2NaOH(aq) + H2(g)

No, they are not, compounds are uniquely different from the elements from which they are made.

When studying chemistry, you often encounter the terms elements and compounds. Elements and compounds are often mistaken for the same thing, but they are very different.

The difference between elements and compounds can be seen from their definitions. Reporting from the Encyclopedia Britannica, elements are substances that cannot be broken down into simpler substances by ordinary chemical processes.

The elements are the basic ingredients that make up all kinds of matter. Meanwhile, a compound is a substance consisting of two or more elements. Thus, a compound can be broken down into its constituent elements.

Elements consist of only one type of atom. Meanwhile, compounds consist of more than two atoms of the same type, or more than two atoms of different types. The composition of the atoms that make up the compound has a certain ratio that is bound in chemical bonds.

Elements and compounds have different symbols to represent their identity. Elements are represented by symbols in the form of abbreviated atomic names, for example H for hydrogen and Na for sodium. Meanwhile, compounds are represented by chemical formulas or empirical formulas. Reporting from Thought Co, the empirical formula is a formula that shows the ratio of elements forming a compound. Ratios are represented by the symbol of the element and the subscript number. For example, glucose has the empirical formula CH2O. Meanwhile, glucose has the molecular formula C6H12O6 which symbolizes the number of atoms in it.

The difference between elements and compounds is the amount. Reporting from Science Notes, there are 118 elements listed in the periodic table. Meanwhile, compounds that are combinations of elements have more numbers. It is estimated that there are about 350 thousand existing compounds. However, this number can continue to increase along with the development of science.

Examples of elements:

Hydrogen (H), Boron (B), Iron (Fe), Gold (Au), Copper (Cu)

Examples of compounds:

Water (H2O), Methane (CH4), Hydrochloric acid, (HCl) Sodium chloride (NaCl) ,Sucrose (C12H22O11)

Learn more about Elements and compounds at https://brainly.com/question/16084453.

#SPJ4

Answer:

Explanation:

as we know in a face-centered unit each atom give1/2 a portion at the face

and fully atom involvement at center therefore  

1/2( total face of cube )+ 1(centre)

1/2 ×6 + 1

3+ 1

4 atoms per cell

The enthalpy of fusion is defined as the enthalpy change that occurs when a substance changes from a solid to a liquid at its melting point. The value of ΔS for molten gallium is 1.29 J/K.

The equation for calculation of ΔS is given as,

ΔS = ΔHfus / T

where, ΔHfus is the molar enthalpy of fusion and T is the temperature at which the process occurs.

In the above case, given that,

T = 29.8° C = 303.15 K

Substituting these values we get,

ΔS = (5.59 kJ/mol) / (303.15 K) = 0.0185 J/K

The change in entropy is positive which is because the substance is changing from a more ordered state (a solid) to a less ordered state (a liquid).

For calculating the change in entropy when 70.0 g of Ga(l) solidifies at 29.8° C, we can use the equation given below,

ΔS = m × ΔS/mol

where, m is the mass of the substance in grams, and ΔS/mol is the change in entropy per mole of the substance.

In the above case, given that

m = 70.0 g

ΔS/mol = 0.0185 J/K

Substituting the values we get,

ΔS = (70.0 g) × (0.0185 J/K) = 1.29 J/K

Learn more about change in entropy from the link given below.

https://brainly.com/question/9808515

#SPJ4

The boiling requires overcoming air pressure with vapor pressure, the boiling temperature of water depends on your height from sea level. Additionally, although this tends to raise the boiling point, it relies on the presence of contaminants in the water.

However, water boils at sea level at a temperature of 100 degrees Celsius. It serves as a definition. Because that is what the Celsius system is founded on, that temperature was picked. Actually, the temperature that pure liquid water at sea level cannot get above is 100 degrees Celsius, which is the most that it can be heated to before plateauing. The "boiling point" measures the actual object in question.

If you gauge the temperature from the first sign of boiling, it may occur at a little lower levels. Whisps of vapor may be seen around 90–95 degrees, but if you are at sea level with a reliable thermometer and clear water, the temperature should increase to 100 and remain there until the water starts to boil.

To learn more about boiling temperature, refer to:

https://brainly.com/question/13633272

Starting with a 1.35 m HCl stock solution, five standard solutions are prepared by sequentially diluting 5.00 ml of each solution to 100.0 ml. The concentration of the final solution after 5 dilutions is [tex]\rm 4.22 \times 10^{-7} M[/tex].

Dilution in chemistry is the process of lowering a solute's concentration in a solution by incorporating more solvent. Dilution is the process of lowering the solute concentration per unit volume while maintaining a constant solute concentration overall. As a result, the fluid becomes less concentrated or more diluted.

Volume of Stock Solution = 5 mL

                                          = (5 mL)(1 L/1000 mL)

                                           = 0.005 L

Moles of HCl = (1.35 mol/L)(0.005 L)

                     = [tex]\rm 6.75 \times 10^{-3}[/tex] mol

Dilution 1:-

Volume of Solution = 100 mL

                                = (100 mL)(1 L/1000 mL)

                                = 0.100 L

Molarity After 1st Dilution = ([tex]\rm 6.75 \times 10^{-3}[/tex] mol)/(0.100 L)

                                         = [tex]\rm 6.75 \times 10^{-2}[/tex] mol/L

Volume of Solution Taken = 5 mL

                                          = (5 mL)(1 L/1000 mL)

                                          = 0.005 L

Moles of HCl = ([tex]\rm 6.75 \times 10^{-4 }[/tex]mol/L)(0.005 L)

                    =[tex]\rm 3.375 \times 10^{-4}[/tex] mol

Dilution 2:-

Volume of Solution = 100 mL

                                = (100 mL)(1 L/1000 mL)

                                = 0.100 L

Molarity After 2nd Dilution = ([tex]\rm 3.375 \times 10^{-4 }[/tex]mol)/(0.100 L)

                                            =[tex]\rm 3.375 \times 10^{-3}[/tex] mol/L

Volume of Solution Taken = 5 mL

                                            = (5 mL)(1 L/1000 mL)

                                          = 0.005 L

Moles of HCl = ([tex]\rm 3.375 \times 10^{-3}[/tex] mol/L)(0.005 L)

                     = [tex]\rm 1.6875 \times 10-5[/tex] mol

Dilution 3:-

Volume of Solution = 100 mL

                                = (100 mL)(1 L/1000 mL)

                               = 0.100 L

Molarity After 3rd Dilution = ([tex]\rm1.6875 \times 10^{-5 }[/tex]mol)/(0.100 L)

                                           = [tex]\rm 1.6875 \times 10^{-4}[/tex] mol/L

Volume of Solution Taken = 5 mL

                                           = (5 mL)(1 L/1000 mL)

                                           = 0.005 L

Moles of HCl = ([tex]\rm 1.6875 \times 10^{-4}[/tex] mol/L)(0.005 L)

                      = [tex]\rm 8.4375 \times 10^{-7}[/tex] mol

Dilution 4:-

Volume of Solution = 100 mL

                               = (100 mL)(1 L/1000 mL)

                               = 0.100 L

Molarity After 4th Dilution = ([tex]\rm 8.4375 \times 10^{-7 }[/tex]mol)/(0.100 L)

                                          =[tex]\rm 8.4375 \times 10^{-6}[/tex] mol/L

Volume of Solution Taken = 5 mL

                                            = (5 mL)(1 L/1000 mL)

                                            = 0.005 L

Moles of HCl = ([tex]\rm 8.4375 \times 10^{-6 }[/tex]mol/L)(0.005 L)

                      = [tex]\rm 4.21875 \times 10^{-8}[/tex] mol

Dilution 5:-

Volume of Solution = 100 mL

                                 = (100 mL)(1 L/1000 mL)

                                = 0.100 L

Molarity After 5th Dilution = ([tex]\rm 4.21875 \times 10^{-8}[/tex] mol)/(0.100 L)

                                           =[tex]\rm 4.21875 \times 10^{-7}[/tex] mol/L

                                          = [tex]\rm 4.22 \times 10^{-7}[/tex] mol/L

                                          =[tex]\rm 4.22 \times 10^{-7}[/tex] M

To know more about dilution, here:

https://brainly.com/question/28548168

#SPJ12

The distribution of electrons among the orbital shells and subshells is shown in the electron configuration of an atom.

What electron configuration exists in group 18 of period 3?

• According to the Periodic Table, P3- has the same electrical configuration as argon, the following Noble gas (Group 18) element, which is 2,8,8.

• The number of valence electrons in groups 1-2 and 13-18 rises by one from one element to the next across the periodic table's rows, or periods.

•There are several different arrangements for electrons. There should be two distinct trends or patterns: The number of valence shell electrons is constant for elements belonging to the same Group. Along a Periodic Table period, valence electrons are added in increasing numbers from left to right.

• Phosphorus (symbol P) has an atomic number of 15, according to a periodic table or table of elements.

Thus, there are 15 protons in each atom. Lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium are the chemical elements that make up alkali metals (Fr).

To learn more about electron configuration https://brainly.com/question/26084288

#SPJ4

The name of the region around the nucleus where electrons are found is orbital

An atom is the smallest component of ordinary matter with chemical elemental characteristics. Protons and neutrons, which make up its nucleus, and electrons, which orbit around them, are the subatomic particles that make up every atom. Electrons have a negative charge, neutrons have a neutral charge, and protons have a positive charge.

In other words, every atom has an electron-rich energy level and a nucleus where protons and neutrons interact. This is because electrons are present in the orbitals, or peripheral region, as opposed to the atomic nucleus, which is the centre region of the atom made up of protons and neutrons. Thus, the region around the nucleus where electrons are found is orbital

Read more about orbital on:

https://brainly.com/question/20319149

#SPJ4