carbon dioxide is considered to be a greenhouse gas because it _______.

Answer:

The power plants

are inexpensive to build

The enthalpy change when 8.50 L of ozone at a pressure of 1.00 atm and 25°C reacts with 12.00 L of nitric oxide at the same initial pressure and temperature is -277.5 kJ/mol.

The enthalpy change when 8.50 L of ozone at a pressure of 1.00 atm and 25°C reacts with 12.00 L of nitric oxide at the same initial pressure and temperature can be calculated by the given equation. The balanced equation for the reaction is:2O3(g) + 2NO(g) → 2NO2(g) + 3O2(g)The enthalpy change for the given reaction can be determined using Hess’s law. Hess’s law states that the enthalpy change of a reaction is independent of the route taken, provided that the initial and final conditions are the same.

Since the given reaction can be expressed as a sum of a series of known reactions, Hess’s law can be used to calculate the enthalpy change.Using the given data, the enthalpy change for the reaction can be calculated as follows:δH° = 2 × [ΔH°f(NO2(g))] + 3 × [ΔH°f(O2(g))] - 2 × [ΔH°f(O3(g))] - 2 × [ΔH°f(NO(g))]δH° = 2 × [33.85 kJ/mol] + 3 × [0 kJ/mol] - 2 × [142.2 kJ/mol] - 2 × [90.4 kJ/mol]δH° = - 277.5 kJ/mol

To know more about enthalpy change visit:-

https://brainly.com/question/28039996

#SPJ11

The concentration of OH- for a 0.0545 M solution of hydrochloric acid (HCl) is 7.21 x 10^-13 M.

Let's first understand the concepts of acids and bases and strong acids and bases.

Acids are proton donors, and bases are proton acceptors. The strength of an acid or a base is determined by the extent to which it donates or accepts protons. Strong acids and bases dissociate completely in water, while weak acids and bases dissociate only partially.

Thus, a strong acid or base has a high concentration of H+ or OH-, respectively.
Now let's solve the problem. We are given a 0.0545 M solution of hydrochloric acid (HCl).

Since HCl is a strong acid, it dissociates completely in water according to the equation:

HCl → H+ + Cl-

The concentration of H+ in the solution will be equal to the concentration of HCl, which is 0.0545 M.
Since we know that

pOH + pH = 14,

we can calculate the pOH of the solution using the pH:

pH = -log[H+]

pH = -log(0.0545)

pH = 1.2648
Now,

pOH + pH = 14

can be rewritten as:

pOH = 14 - pH

pOH = 14 - 1.2648

pOH = 12.7352
The concentration of OH- can be calculated using the pOH:

pOH = -log[OH-]

12.7352 = -log[OH-]

[OH-] = 7.21 x 10^-13
Therefore, the concentration of OH- for a 0.0545 M solution of hydrochloric acid (HCl) is 7.21 x 10^-13 M.

To know more about hydrochloric acid visit:

https://brainly.com/question/24784580

#SPJ11

a) The Cation Exchange Capacity, CEC, of the soil is 16 cmolc.

b) The aluminum saturation of the soil is approximately 18.75%.

(a) The CEC (Cation Exchange Capacity) of the soil is calculated from the sum of the exchangeable cations present in the soil.

CEC = Ca²⁺ + Mg²⁺ + K⁺ + Al³⁺

CEC = 9 cmolc + 3 cmolc + 1 cmolc + 3 cmolc

CEC = 16 cmolc

(b) To calculate the aluminum saturation of the soil, we need to determine the percentage of the CEC occupied by Al³⁺ ions.

Aluminum Saturation = (Al³⁺ / CEC) * 100

Aluminum Saturation = (3 cmolc / 16 cmolc) * 100

Aluminum Saturation ≈ 18.75%

Learn more about cation exchange capacity at: https://brainly.com/question/30689981

#SPJ4

Answer:

The new volume will be 8.2 x 10⁻³ L or 0.0082 L.

Explanation:

Since our temperature remains constant, apply Boyle's Law:

P₁V₁ = P₂V₂

Plug in the initial pressure and volume on the left side, and the new pressure on the right:

9.9(1.033) = 1245(V₂)

V₂ = (9.9(1.033)) / 1245

V₂ = 8.2 x 10⁻³ L or 0.0082 L

In 0.750 moles of aluminum oxide (Al2O3), there are 2.25 moles of O2- ions. This is determined by the balanced chemical equation for the formation of aluminum oxide, which states that for every 1 mole of Al2O3, there are 3 moles of O2- ions.

By using a simple mole-to-mole conversion, we can calculate the number of moles of O2- ions present. Thus, with 0.750 moles of Al2O3, multiplying by the ratio of 3 moles O2- ions to 1 mole Al2O3 yields 2.25 moles of O2- ions. To determine the number of moles of O2- ions in 0.750 moles of aluminum oxide (Al2O3), we need to consider the balanced chemical equation for the formation of aluminum oxide. The formula for aluminum oxide indicates that for every 1 mole of Al2O3, there are 3 moles of O2- ions. Therefore, if we have 0.750 moles of Al2O3, we can calculate the number of moles of O2- ions as follows:

0.750 moles Al2O3 × (3 moles O2- ions / 1 mole Al2O3) = 2.25 moles O2- ions

Therefore, there are 2.25 moles of O2- ions in 0.750 moles of aluminum oxide, Al2O3.

Learn more about moles here : brainly.com/question/30885025
#SPJ11

The mass of carbon dioxide produced by the combustion of octane can be calculated using the balanced chemical equation for the reaction and the molar mass of octane and carbon dioxide.

The balanced chemical equation for the combustion of octane (C8H18) is:

2 C8H18 + 25 O2 → 16 CO2 + 18 H2O

From the balanced equation, we can see that for every 2 moles of octane burned, 16 moles of carbon dioxide are produced. To calculate the mass of carbon dioxide, we need to convert the moles of octane to moles of carbon dioxide using the molar ratio.

The molar mass of octane is approximately 114.22 g/mol, and the molar mass of carbon dioxide is approximately 44.01 g/mol. Therefore, the molar ratio of octane to carbon dioxide is 2:16 or 1:8.

To calculate the mass of carbon dioxide produced, we can use the formula:

Mass of carbon dioxide = (moles of octane) × (molar ratio) × (molar mass of carbon dioxide)

The exact mass calculation would require the quantity of octane, but once the moles of octane are known, the mass of carbon dioxide can be determined using the formula above.

Learn more about molar mass, below:

https://brainly.com/question/31545539

#SPJ11

Answer:chain reaction

Explanation:

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

net force = 2400 × 3.6

We have the final answer as

Hope this helps you

If the scientist intends to apply the combined gas law to determine various attributes, the following statement is accurate: (A) The pressure must remain at 200 kPa, but the volume, temperature, and amount can change.

Among the statements provided:

A. The statement "The pressure must stay at 200 kPa, but the volume, temperature, and amount can change" is true regarding the remainder of the experiment if the scientist wants to use the combined gas law to calculate different properties. In the combined gas law, the pressure is a constant value, while the volume, temperature, and amount of gas can vary.

B. The statement "The volume must stay at 300 mL, but the pressure, temperature, and amount can change" is not true regarding the remainder of the experiment if the scientist wants to use the combined gas law. The combined gas law allows for changes in all four variables: pressure, volume, temperature, and amount of gas.

C. The statement "The temperature must stay at 900 K, but the pressure, temperature, and amount can change" is not true regarding the remainder of the experiment if the scientist wants to use the combined gas law. The combined gas law considers variations in temperature along with other variables.

D. The statement "The amount must stay at 0.008 mol CO₂, but the temperature, pressure, and volume can change" is not true regarding the remainder of the experiment if the scientist wants to use the combined gas law. The combined gas law takes into account changes in all four variables, including the amount of gas.

In summary, only statement A is true regarding the remainder of the experiment if the scientist wants to use the combined gas law.

To know more about the combined gas law refer here :

https://brainly.com/question/13154969#

#SPJ11

Complete question :

Which of the following statements are true regarding the remainder of the experiment if the scientist wants to use the combined gas law to calculate different properties?

A. The pressure must stay at 200 kPa, but the volume, temperature, and amount can change.

B. The volume must stay at 300 mL, but the pressure, temperature, and amount can change.

C. The temperature must stay at 900 K, but the pressure, temperature, and amount can change.

D. The amount must stay at 0.008 mol CO2, but the temperature, pressure. and volume can change. are filled with comcsodiocodec

a. ΔG>0 - 4. Q < K - This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium.

a. ΔG>0 - 4. Q < K

b. ΔG<ΔG∘ - 1. Q > K

c. equilibrium - 5. Q = K

d. K=0 - Not applicable

e. ΔG>ΔG∘ - 2. Q > 1

f. standard state - Not applicable

g. ΔG<0 - 6. Q < 1

a. ΔG>0 - 4. Q < K

This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium. In terms of the reaction quotient (Q) and the equilibrium constant (K), if Q is less than K, it means the reaction is not yet at equilibrium. This is because the ratio of the concentrations of the reactants and products, as represented by Q, is smaller than the equilibrium constant K, indicating that the reaction has not reached a state of equilibrium.

b. ΔG<ΔG∘ - 1. Q > K

When the change in Gibbs free energy (ΔG) for a reaction is less than the standard Gibbs free energy change (ΔG∘), it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is greater than K, it means that the reaction has proceeded further than the equilibrium position, indicating that the reaction is spontaneous in the forward direction.

c. equilibrium - 5. Q = K

At equilibrium, the reaction quotient (Q) is equal to the equilibrium constant (K). This means that the concentrations of the reactants and products in the reaction have reached a balance, and there is no net change in the system over time.

d. K=0 - Not applicable

This label does not have a corresponding match. K=0 would indicate that the equilibrium constant is zero, which is not a valid scenario as equilibrium constants are always positive values.

e. ΔG>ΔG∘ - 2. Q > 1

When the change in Gibbs free energy (ΔG) for a reaction is greater than the standard Gibbs free energy change (ΔG∘), it indicates that the reaction is non-spontaneous in the forward direction. In terms of Q and K, if Q is greater than 1, it means that the reaction has proceeded further in the forward direction than it would be at equilibrium, indicating that the reaction is non-spontaneous in the forward direction.

f. standard state - Not applicable

This label does not have a corresponding match in the given options.

g. ΔG<0 - 6. Q < 1

If the change in Gibbs free energy (ΔG) for a reaction is less than zero, it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is less than 1, it means that the reaction has not proceeded as far as it would be at equilibrium, indicating that the reaction is spontaneous in the forward direction.

The correct question is:

Match the following (a-g with 1.-6).  Note: not all labels will be used.

a. ΔG>0,

b. ΔG<ΔG∘

c. equilibrium

d. K=0

e. ΔG>ΔG∘

f. standard state

g. ΔG<0

1. Q > K

2. Q > 1

3. Q = 1

4. Q < K

5. Q = K

6. Q < 1

To know more about Gibbs free energy (ΔG) follow the link:

https://brainly.com/question/30870882

#SPJ4

Based on the reduction potential data, the standard cell potential for the electrochemical cell reaction is +1.10 V. The correct answer is B.

The standard cell potential is the difference between the standard reduction potentials of the two half-reactions. In this case, the half-reactions are:

Zn(s) + 2e- -> Zn²⁺(aq) E° red = -0.763 V

Cu²⁺(aq) + 2e- -> Cu(s) E° red = +0.340 V

The standard cell potential is therefore:

E° cell = E° red (cathode) - E° red (anode)

E° cell = +0.340 V - (-0.763 V)

E° cell = +1.10 V

Therefore, the correct option is B, +1.10 V.

To know more about standard cell potential, refer here:

https://brainly.com/question/29797132#

#SPJ11

The elements that can form acidic compounds are sulfur, arsenic, selenium, and antimony.

Sulfur (S), arsenic (As), selenium (Se), and antimony (Sb) are the elements that can form acidic compounds. These elements have the ability to gain electrons or donate hydrogen ions, resulting in the formation of acidic species.

Sulfur is commonly found in various acidic compounds, such as sulfuric acid (H_{2}SO_{4}), sulfurous acid ([tex]H_{2}SO_{3}[/tex]), and sulfides (e.g., hydrogen sulfide, H2S). Arsenic can form acids like arsenic acid ([tex]H_{3}AsO_{4}[/tex]) and arsenous acid (H_{3}AsO_{}). Selenium can form selenous acid ([tex]H_{2}SeO_{3}[/tex]) and selenic acid (H_{2}SeO_{4}). Antimony can react with oxygen to form antimony pentoxide ([tex]Sb_{2}O_{5}[/tex]), which can further react with water to produce antimony acid (HSb([tex]OH_{6}[/tex])).

On the other hand, rubidium (Rb), silicon (Si), and xenon (Xe) do not typically form acidic compounds. Rubidium is an alkali metal and is more likely to form basic compounds. Silicon is a nonmetal and is commonly found in covalent compounds rather than acidic ones. Xenon is a noble gas and is generally inert, meaning it does not readily form compounds, including acidic ones.

In summary, sulfur, arsenic, selenium, and antimony are the elements that can form acidic compounds, while rubidium, silicon, and xenon do not typically exhibit acidic properties.

Learn more about compounds here: https://brainly.com/question/13762398

#SPJ11

1. Criteria used to distinguish viable organisms from nonviable suspended debris are motility, shape and structure.

2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period.

3. We can use Visual Examination and Smell Test to ascertain whether your suspicion is justified.

1. To distinguish viable organisms from nonviable suspended debris in a drop of stagnant pond water during microscopic observation, the following criteria can be used:

2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period. Gram staining is a differential staining technique used to categorize bacteria into two major groups: Gram-positive and Gram-negative, based on their cell wall composition.

3. To ascertain whether a nutrient agar slant culture is contaminated, the following steps can be followed:

By following these steps, you can gather evidence to determine whether a nutrient agar slant culture is contaminated or not.

The correct question is:

1. During the microscopic observation of a drop of stagnant pond water, what criteria would you use to distinguish viable organisms from nonviable suspended debris?

2. Because of a snowstorm, your regular laboratory session was canceled and the Gram staining procedure was performed on cultures incubated for a longer period of time. Examination of the stained B. cereus slides revealed a great deal of color variability, ranging from an intense blue to shades of pink Account for this result.

3. Upon observation of the nutrient agar slant culture, you strongly suspect that the culture is contaminated. Outline the method you would follow to ascertain whether your suspicion is justified.

To know more about Gram staining follow the link:

https://brainly.com/question/4129405

#SPJ4

In both cases, the change in pH is 0.18 because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution.

The buffer solution is a weak base-weak acid buffer. The pH of a buffer solution is given by the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where:

pH = pH of the solution

pKa = negative logarithm of the acid dissociation constant

[A⁻] = concentration of the conjugate base

[HA] = concentration of the acid

The pKa of ammonia is 9.25. The concentration of ammonia is 0.100 M and the concentration of ammonium chloride is 0.100 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log([NH₃]/[NH₄Cl])

pH = 9.25 + log(0.100/0.100)

pH = 9.25

When 9.00 mL of 0.100 M HCl is added to the buffer solution, the concentration of HCl is 0.0090 M. The HCl will react with the ammonia in the buffer solution to form ammonium chloride. The reaction is:

HCl + NH₃ ⇔ NH₄Cl

The concentration of ammonia will decrease and the concentration of ammonium chloride will increase. The new concentration of ammonia will be 0.091 M and the new concentration of ammonium chloride will be 0.109 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log(0.091/0.109)

pH = 9.07

The change in pH is:

ΔpH = 9.25 - 9.07 = 0.18

Calculating the change in pH when 9.00 mL of 0.100 M NaOH is added to the original buffer solution:

The NaOH will react with the ammonium chloride in the buffer solution to form ammonia and water. The reaction is:

NaOH + NH₄Cl ⇔ NH₃ + H₂O + NaCl

The concentration of ammonia will increase and the concentration of ammonium chloride will decrease. The new concentration of ammonia will be 0.109 M and the new concentration of ammonium chloride will be 0.091 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log(0.109/0.091)

pH = 9.43

The change in pH is:

ΔpH = 9.43 - 9.25 = 0.18

In both cases, the change in pH is 0.18. This is because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution. The buffer capacity is the amount of acid or base that can be added to a buffer solution before the pH changes by 1 unit.

Find out more on pH here: https://brainly.com/question/26424076

#SPJ4

The minimum number of atoms that could be contained in the unit cell of an element with a body-centered cubic (BCC) lattice is 2 atoms.

In a body-centered cubic lattice, each corner of the cube is occupied by one atom, and there is an additional atom at the center of the cube. This arrangement gives rise to a total of 2 atoms per unit cell.

The corner atoms are shared between adjacent unit cells, contributing 1/8th of an atom to each cell, while the atom at the center is fully contained within the unit cell.

Therefore, the minimum number of atoms in the unit cell of a BCC lattice is 2.

To learn more about unit cell here brainly.com/question/13110055

#SPJ11

Given that the mole fraction of O2 in the air is 0.21, the total pressure is 0.83 atm, and Henry's law constant (kH) for O2 in water is 1.3 x 10-3 M/atm, the solubility of O2 in water can be calculated to be 2.7 x 10⁻⁴ M.

According to Henry's law, the solubility of a gas (in this case, O2) in a liquid (water) is given by the equation: C = kH * P, Where: C is the concentration of the gas in the liquid (solubility),kH is Henry's law constant for the specific gas, P is the partial pressure of the gas. Given that the mole fraction of O2 in the air is 0.21, we can calculate the partial pressure of O2 in the air as follows: PO2 = XO2 * PT, Where: PO2 is the partial pressure of O2, XO2 is the mole fraction of O2 in air, PT is the total pressure. Substituting the given values, we have PO2 = 0.21 * 0.83 atm = 0.17343 atm. Now, we can calculate the solubility of O2 in water using Henry's law: C = kH * P = (1.3 x 10-3 M/atm) * (0.17343 atm) ≈ 2.7 x 10⁻⁴ M.

To learn more about Henry's law, click here: brainly.com/question/30636760

#SPJ11

Answer:

9.05 g

Explanation:

PV=nRT

Use the ideal gas equation. Substitute values.

P = 5 atm

V = 1.50 L

n = ?

R (gas constant) = 0.08206 L-atm/mol-K

T = 20.0°C

*Always convert °C to K.

T = 20.0° + 273 = 293K

Substitute values.

(5 atm)(1.50 L) = n(0.08206 L-atm/mol-K)(293K)

n = (5 atm)(1.50 L) / (0.08206 L-atm/mol-K)(293K)

n = 0.3119335... mol

Convert to grams with the given average mass of air.

0.3119335... mol x (29.0 g/1 mol) = 9.05 g

The correct option is (d.) Amino Acid Analysis. While a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation.

Amino Acid Analysis is not a colorimetric method for protein quantitation. It is a technique used to determine the composition and concentration of amino acids in a protein sample, but it does not rely on colorimetric reactions to quantify the protein content.

The other options listed (a. Biuret Test, b. Folin-Ciocalteu (Lowry) Assay, c. Bradford Assay, and e. Bicinchoninic Acid (BCA) Assay) are all colorimetric methods commonly used for protein quantitation.

Amino Acid Analysis, while a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation. The other methods mentioned are commonly used for protein quantitation and rely on colorimetric reactions to measure protein concentration.

To know more about colorimetric , visit:

https://brainly.com/question/30227806

#SPJ11

Change in entropy of the system ΔSsys would be positive, negative, negative, negative respectively.

The term "ΔSsys" refers to the change in entropy of the system. The entropy change of a system is determined by considering the system's state before and after the reaction occurred. Here are the sign of ΔSsys for each of the given chemical reactions:

a) 2H3O+ (aq) + CO32- (aq) → CO2 (g) + 3H2O (l)

The reaction involves the formation of one gas molecule and three liquid molecules from two aqueous solutions. Because gas molecules have a higher entropy than liquids, the entropy of the system would rise if the reaction were to take place. Therefore, ΔSsys would be positive.

b) CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l)

The reaction involves the formation of one gas molecule and two liquid molecules from two gas molecules. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.

c) PCl3 (l) + Cl2 (g) → PCl5 (s)The reaction involves the formation of a solid product from a liquid and a gas. Because solids have lower entropy than liquids or gases, the entropy of the system would decrease. Therefore, ΔSsys would be negative.

d) SO3 (g) + H2O (l) → H2SO4 (l)The reaction involves the formation of a liquid from two gases. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.

Learn more about Change in entropy here:

https://brainly.com/question/28244712

#SPJ11

Answer:

24,000 years

Explanation:

The mole ratio for 82% nitrogen (N) and 18% hydrogen (H) is roughly 1:3. As a result, the compound's empirical formula is NH₃ (one nitrogen and three hydrogen atoms).

To calculate the empirical formula from the given percent compositions, we need to convert the percentages into moles and find the simplest whole-number ratio between the elements. Here's the calculation:

Assuming we have 100 grams of the compound, we would have:

- 82 grams of nitrogen (N)

- 18 grams of hydrogen (H)

Now, we need to convert these masses into moles using the molar mass of each element:

- Nitrogen (N): 1 mole of N = 14.01 grams

[tex]\begin{equation}\text{Moles of N} = \frac{82 \text{ grams}}{14.01 \text{ g/mol}} \approx 5.85 \text{ mol}[/tex]

- Hydrogen (H): 1 mole of H = 1.01 grams

[tex]\[\text{Moles of H} = \frac{18 \text{ g}}{1.01 \text{ g/mol}} \approx 17.82 \text{ mol}\][/tex]

Next, we need to find the simplest whole-number ratio between nitrogen and hydrogen by dividing each number of moles by the smaller value (5.85 mol, in this case):

[tex]\[\text{Moles of N (rounded)} = \frac{5.85 \text{ mol}}{5.85 \text{ mol}} = 1\][/tex]

[tex]\[\text{Moles of H (rounded)} = \frac{17.82 \text{ mol}}{5.85 \text{ mol}} \approx 3.04\][/tex]

The ratio between N and H is approximately 1:3, so the empirical formula of the compound is NH₃ (1 nitrogen atom, 3 hydrogen atoms).

To know more about the mole ratio refer here :

https://brainly.com/question/32125056#

#SPJ11

Compound A is likely a compound containing a central carbon atom bonded to two methyl groups, followed by a carbon chain of three carbons ending with a carbonyl group.

Based on the given reaction of oxidative cleavage with KMnO₄ in an acidic solution, the products formed are:

Compound A → (CH₃)₂C=O + CH₃CH₂CH₂CO₂H

From this, we can deduce that Compound A must be a compound that, upon oxidative cleavage, yields acetone [(CH₃)₂C=O] and a carboxylic acid (CH₃CH₂CH₂CO₂H).

To propose a structure for Compound A, we need to consider the functional groups and the products formed.

1. Acetone (CH₃)₂C=O: This is a ketone functional group, consisting of a carbon double-bonded to an oxygen atom, with two methyl groups attached to the same carbon atom.

2. Carboxylic acid (CH₃CH₂CH₂CO₂H): This is a carboxylic acid functional group, consisting of a carbon double-bonded to an oxygen atom (carbonyl group) and a hydroxyl group (-OH) attached to the same carbon atom. The carbon atom is further bonded to an ethyl group (CH₂CH₂) and a hydrogen atom (H).

Based on these products, a possible structure for Compound A is:

In this structure, the central carbon atom is bonded to two methyl groups (CH₃) and is connected to an ethyl group (CH₂CH₂) and a carboxylic acid group (COOH).

Learn more about oxidative cleavage here:

https://brainly.com/question/32677709

#SPJ4

Answer:

D. 18g

Explanation:

To get the answer, we will use an equation to convert the grams of C2H5OH to moles of C2H5OH, then I will convert the moles of C2H5OH to moles of CO2, and then I will convert the moles of CO2 to grams of CO2.

9.2g C2H5OH / 46.07g C2H5OH = 0.199 mol C2H5OH

0.199 mol C2H5OH (2 mol CO2 / 1 mol C2H5OH) = 0.398 mol CO2

0.398 mol CO2 (44.01g CO2 / 1 mol CO2) = 17.515g CO2

The answer closest to our answer is answer choice D. 18g

Therefore, the answer is D

In normal temperatures, carbon dioxide is a colorless, non-flammable gas, its calculated value is "18 gram".

Equation:

[tex]\to \bold{C_2H_5OH\ (l)+3O_2\ (g) \to 2CO_2\ (g)+3H_2O\ (g)}[/tex]

In the above-given scenario, We'll utilize an equation that converts grams of ethanol to moles of ethanol, then converts moles of ethanol to moles of carbon dioxide, and finally, transforms the moles of carbon dioxide into grams of carbon dioxide to get the result.

Following are the calculation of the conversion of carbon dioxide:

[tex]\to \frac{9.2\ g\ C_2H_5OH }{46.07\ g\ C_2H_5OH} = 0.199\ mol C_2H_5OH\\\\\to 0.199\ mol\ C_2H_5OH \ (\frac{2\ mol\ CO_2}{ 1\ mol\ C_2H_5OH}) = 0.398\ mol\ CO_2\\\\\to 0.398\ mol \ CO_2 \ (\frac{44.01\ g\ CO_2}{1 \ mol\ CO_2}) = 17.515\ g\ CO_2 \approx 18\ g \ CO_2\\\\[/tex]

Therefore, the answer is "Option D".

Find out more about the CO2 here:

brainly.com/question/867804

1. The type of polymer that would you obtain if sorbitol is a polyol.

2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects.

2b. Yes, these polymers are considered to be biodegradable.

1. The type of polymer that would you obtain if sorbitol (a sugar alcohol found in sugar-free gum) was used as a plasticizer additive is a polyol. This is because sorbitol is a polyol, which is a substance used to modify the properties of polymers. The process of polymer modification involves adding polyols to the polymer matrix, which helps to reduce the glass transition temperature of the polymer. Sorbitol can be used as a plasticizer addictive because it is a natural and non-toxic compound that is biodegradable.

2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects. These polymers are natural and non-toxic, and they are biodegradable, which means that they do not pose a risk to the environment. Additionally, they can be used to modify the properties of the drugs or pesticides, making them more effective and reducing their toxicity.

2b. Yes, these polymers are considered to be biodegradable. This is because they are made from natural materials that can be broken down by biological processes. Starch-borate and starch-glycerol polymers are particularly attractive for use in biodegradable materials because they are non-toxic and biocompatible. They can be used in a variety of applications, including packaging materials, agricultural films, and medical devices, where their biodegradability is an important factor.

To know more about polyol visit:

https://brainly.com/question/32067095

#SPJ11

Diffusion is the process by which particles (such as molecules, ions, or atoms) move from an area of higher concentration to an area of lower concentration, driven by the concentration gradient.

A concentration gradient refers to the difference in concentration between two regions. In diffusion, particles move randomly and collide with each other, causing them to spread out and distribute themselves evenly.

As particles move from higher concentration to lower concentration, the concentration gradient decreases, resulting in the equalization of concentrations over time. This movement occurs due to the natural tendency of particles to achieve a state of equilibrium, where there is no net movement of particles across the concentration gradient.

Diffusion plays a crucial role in various biological, physical, and chemical processes, such as gas exchange in the lungs, the transport of nutrients across cell membranes, and the mixing of substances in solutions.

To know more about the concentration gradient refer here :

https://brainly.com/question/13680237#

#SPJ11

The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.

Upper and lower bounds for an Al2O3 particle - Al matrix composite E(Al)-69 GPa, E(AlbO3)-380 GPa, Volume fraction(Al)-0.40The rule of mixtures is a tool that is used to estimate the properties of composites. This rule is based on the following equation:Em=E1V1+E2V2Where, E is the modulus of elasticity, V is the volume fraction, and the subscripts 1 and 2 denote the individual phases. For this case, we have two phases: Al and Al2O3 particles.To find the upper and lower bounds, we'll use the following equation:Em=V1E1+V2E2Lower bound:Em = 0.4(69) + 0.6(380) = 243 GPaUpper bound:Em = 0.6(69) + 0.4(380) = 177 GPab) Calculate the upper bound for the specific stiffness of this composite.p(Al)-2.71 g/cm3, pAl2O3 3.98 g/cm3Specific stiffness is defined as the ratio of the elastic modulus to density.Specific stiffness, E/ρ = Em/Vm, where Vm is the total volume and can be calculated as:Vm = V1 + V2 = 0.4 + 0.6 = 1.E/ρ= Em/VmSo the upper bound is:E/ρ=177/((0.4 x 2.71) + (0.6 x 3.98))=25.36 x 10^6 N/m3Ans: The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.

Learn more about stiffness here:

https://brainly.com/question/31172851

#SPJ11

Answer:

The first one is correct.

Explanation: Eh Are you cheating on quiz?