The correct statement is that beef contributes to green house effect. As a result of fermentation in cows' digestive tracts, which emits methane gas, producing beef results in a greater greenhouse gas contribution than producing chickens.
India, for instance, consumes the least meat of any nation despite having the biggest population of cattle worldwide. Cows live longer as a result, and they produce more methane overall. Additionally, cows in tropical areas produce less milk and meat, which increases the time it takes for them to reach the market. The greenhouse effect explains how heat is trapped at the Earth's surface by "greenhouse gases."You may think of these heat-trapping gases as a blanket keeping the Earth warmer than it otherwise would be. Examples of greenhouse gases include carbon dioxide, methane, nitrous oxides, and water vapor. “Feedback” is a type of water vapor that reacts physically or chemically to changes in temperature. Scientists have found that the warming effect of carbon dioxide contributes to the stabilization of Earth's atmosphere.
Learn more about methane gas here:
https://brainly.com/question/12645626
#SPJ4
As a result of fermentation in cows' digestive systems, which emits methane gas, producing beef results in a greater greenhouse gas contribution than producing chickens.
When comparing the emissions of different greenhouse gases (GHGs) based on their global-warming potential (GWP), carbon dioxide equivalents, also known as CO2e, are used to convert levels of other gases to the equivalent quantity of carbon dioxide with the same GWP.While this is going on, global-warming potential explains the relative potency of a greenhouse gas, molecule for molecule, taking into account how long it remains active in the atmosphere. The following are some of the greenhouse gases included in the Kyoto Protocol: Carbon dioxide (CO2). Nitrous oxide, methane (CH4) (N2O). Hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride are examples of fluorinated gases (NF3).
To know more about greenhouse gas click here brainly.com/question/4509458
#SPJ4
This data table shows how quickly rope will rot away in freshwater and saltwater. what can you conclude about the rates of the rotting reaction?
A. The reaction occurs more slowly when the concentration of salt is higher.
B. The reaction occurs more quickly when the concentration of salt is higher.
C. The reaction occurs at the same rater, regardless of the concentration salt.
D. There is not enough information to conclude anything about the reaction rates.
From the available data in the table provided, we can conclude that high salt concentration caused the rope to rot more quickly—option B.
Factors affecting reaction ratesThe rate at which the reactants of a reaction become products is influenced by various factors. Some of the factors include:
pressureconcentration of reactantspresence of catalyststhe surface area of reactantsIn the provided table, it took the rope 10 years to decay in lake water while the same rope decayed in just 4 years in ocean water.
Assuming that all other factors have been considered and kept constant, the only difference between the two water bodies is the salt concentration. While the lake had almost zero salt concentration on average, the ocean water had a very high salt concentration on average.
Thus, one can logically conclude that the difference in the amount of time it took for the rope to rot is due to the difference in salt concentration between the two water bodies.
In other words, the conclusion would be that the reaction occurs more quickly when the concentration of salt is higher.
More on rate of reactions can be found here: https://brainly.com/question/28566775
#SPJ1
An atom of the isotope bromine-80 consists of how many protons (p), neutrons (n), and electrons (e)? a) 45p, 35n, 45e b) 45p, 45n, 35e c) 35p, 45n, 35e d) 35p, 35n, 45e e) none of the above
An atom of the isotope bromine-80 consists of protons (p) = 35 neutrons (n) = 45 and electrons (e) =35. So option c is correct.
Calculation of number of protons and electrons as mentioned in the question will be as follows
For Br - 80
Z=35 and A = 80
A = mass number
Z = number of protons
As it is a neutral species, so
number of protons = number of electrons = z = 35
Calculation of number of neutrons
We know, Mass number (A) = number of protons (Z)+ number of neutrons (n)
So, number of neutrons =A−Z =80 − 35 = 45
So the answer will be
p=35
e−= 35
n= 45
To look more about bromine click here
brainly.com/question/29028678
#SPJ4
pollution concentration is group of answer choices always higher during the day than at night. determined solely by the wind speed.
Daytime pollution levels are always higher than nighttime levels. the amount of a contaminant contained in a certain amount of air.
Does pollution increase at night?
This is because as the temperature drops at night, the atmosphere traps pollutants such as CO2 from cars and other sources in the home and close to the ground. If the home's interior areas are inadequately ventilated, the effect is even more pronounced.
How does wind speed affect air pollution?
Air pollutants spread when the wind moves them away from their source. In general, the more contaminants are spread and the lower their concentration, the higher the wind speed.
To know more about pollution visit
https://brainly.com/question/19221096
#SPJ4
Question 4
How many moles of CuSO4 are there in 7.87 x 1024 molecules of CuSO4?
Answer:
8058.88
Explanation:
7.87 x 1024=8058.88
you got this bro!
consider carbon balance in the citric acid cycle. how many co2 molecules leave the cycle for each acetic acid molecule that enters? for this question, assume that carbon only enters as acetic acid and exits as co2 . note that acetic acid has two carbon atoms. you can determine the number of carbon atoms in carbon dioxide from its formula, co2 .
Two carbon dioxide molecules are formed during citric acid cycle. Two acetyl-CoA molecules enter the cycle, and each has two carbon atoms, so four carbon dioxide molecules will form.
With each turn of the citric acid cycle, two carbon atoms from the acetyl group of acetyl CoA join with the four-carbon oxaloacetate, the last intermediate in the citric acid cycle to form citrate, a six-carbon acid.
Each turn of the cycle forms three NADH molecules and one FADH2 molecule. These carriers will connect with the last portion of aerobic respiration to produce ATP molecules. One GTP or ATP is also made in each cycle.
Learn more about citric acid cycle here:- https://brainly.com/question/14900762
#SPJ4
codeine is usually produced as a. slight chemical modification of opium. b. slight chemical modification of morphine. c. completely synthetic drug. d. slight chemical modification of cocaine.
codeine is usually produced as option B . slight chemical modification of morphine.
Codeine is an opioid painkiller that is used to manage mild to moderate pain in the near term. It is not typically recommended again for treatment of long-term (long-term) pain. Codeine is only available with the a prescription from a doctor. Codeine is a painkiller with alternate uses to morphine, but it is significantly less potent as a pain reliever and only has mild soothing properties. It is also used to treat coughs and diarrhoea. Codeine is a sympathomimetic weak analgesic. Drugs are a class of natural and synthetic compounds which are widely used to relieve pain. There are 3 kinds of opioid drugs: found naturally, synthetic, and illicit. Naturally occurring: This is made from the liquid extracted from of the unpeeled pods of the poppy plants flower.
Learn more about Codeine here:
https://brainly.com/question/14343238
#SPJ4
Conducting rod Wil be given positive charge 4, procedure that uses some or all of the following steps in an appropriate order: Step W: Rod A is connected t0 ground: Step X: Negatively charged rod B is brought near, but does not touch rod Step Y: The connection between ground and rod IS removed Step Z: Rod B is moved away- Which of the following lists sufficient steps in an order that will give rod A positive charge? Select two answers. (A) WXY (B) WXZ W,XYZ (D) W,XZ Y Which of the following accurately describe how the kinetic energy of atoms in sample 20. ,of monatomic ideal gas changes when the temperature is increased? Select two answers __ Thc kinctic encrgy of euch individual atom in the gas increases: (B) The kinetic energy of each individual atom in the gas may increase Or decrease_ (C) The average kinetic energy of the whole sample of atoms increases- (D) The kinetic energy of some individual atoms increases, but the average kinetic energy of the whole sample of atoms does not change.
The steps in order that will give rod A positive charge are W,XYZ and WXZY. The correct option to this question is C and D.
The average kinetic energy of the whole sample of atoms increases when there is increase in temperature. The correct option to this question is C.
When the temperature of monotonic gases rises, the kinetic energy of the entire sample of the gas rises in a direct proportion to the temperature at which the sample is moving. We can infer that the temperature increases and has a direct proportional effect on the entire sample of gas. Additionally, kinetic energy rises.
For more information on Kinetic energy of atoms kindly visit visit to
https://brainly.com/question/2948463
#SPJ4
Using the ionization constants (ka and kb) tables in your online textbook's appendix, calculate the ph of a 1.32 m ammonium chloride (nh4cl) aqueous solution. (enter the numerical value in the space provided below.)
The pH of the 1.32 M ammonium chloride (NH4Cl) aqueous solution is 9.12.
To determine the pH of the 1.32 M ammonium chloride (NH4Cl) aqueous solution we need the values of ionization constants (ka and kb) and the concentration of ammonium chloride which is 1.32 M.
The values of ionization constants (ka and kb) are
Ka of NH4+ = 5.6 x 10-10
Kb of Cl- = 1.0 x 10-7
Calculate the concentrations of NH4+ and Cl- in the solution.
NH4+ = 1.32 M
Cl- = 1.32 M
Calculate the equilibrium concentrations of H3O+ and OH- using the ionization constants.
Ka = [H3O+][NH4+]/[NH4+]
[H3O+] = Ka x [NH4+] = (5.6 x 10-10)(1.32) = 7.37 x 10-10
Kb = [OH-][Cl-]/[Cl-]
[OH-] = Kb x [Cl-] = (1.0 x 10-7)(1.32) = 1.32 x 10-7
Calculate the pH of the solution.
pH = -log[H3O+] = -log(7.37 x 10-10) = 9.12
The pH of the 1.32 M ammonium chloride (NH4Cl) aqueous solution is 9.12.
For more questions like pH calculation click the link below:
https://brainly.com/question/9278932
#SPJ4
Using the count data and observational data you acquired, calculate the number of CFUs in the original sample. Number of CFUs - 54000000 CFUS You discover that the plate you selected had only been inoculated with 0.1mL of the dilution instead of 1ml. Using the count data and observational data you acquired, re-calculate the number of CFUs in the original sample. Number of CFUS = 1540000000 CFUS
The number of CFU's in the original sample is 540000000.
The colony forming unit stands for (CFU) is a measure of viable colonogenic cell numbers in CFU/mL. CFU's are an indication of the number of cells that remain viable enough to proliferate and form small colonies.
CFU/ml = [Number of colonies ][Dilution factor]/Volume of cultre plate
In the question , Volume of cultre sample=0.1 ml
Dilution factor = Final volume/Sample volume
= 0.1 ml/1 ml
= 0.1 ml
Let x be the number of colonies,
CFU =[x 1/10] /0.1 =540000000
x = 540000000 × 0.1 × 10
= 540000000
Therefore CFU in the original sample = [540000000 × 1/10 ] /0.1
= 540000000
Learn more about CFU's from the link given below.
https://brainly.com/question/27056503
#SPJ4
26. In Rutherford's alpha scattering experiment, a few of the alpha particles aimed at a thin gold foil bounced back because
A. The positively charged alpha particles were repelled by a negatively charged nucleus in the gold atom.
B. The positively charged alpha particles were repelled by a positively charged nucleus in the gold atom.
C. The negatively charged alpha particles were repelled by a negatively charged nucleus in the gold atom.
D. The negatively charged alpha particles were attracted to a positively charged nucleus in the gold atom.
Answer:
A
Explanation:
The positively charged alpha particles were repelled by a negatively charged nucleus in the gold atom.
How many moles of H2SO4 are in a 25ml sample of 0.25M H2SO4?
Answer:
Hope this answer will help you.
Explanation:
As we know that
morality =moles/vol.in liter
in order to no.of moles we simply multiply molarity with volume which is 0.025L
0.25×0.025=0.00625moles
if the manipulation of the iv is weakened and all else is held constant, which of the following would be expected to occur?
Option ( a) is correct because In F ratio, numerator is the mean sum of square due to regression or controlled variable. And of we manipulate or weakened the independent variable, then numeretor is also weekened or week. if the manipulation of the iv is weakened and all else is held constant
Regression analysis is a statistical method for connecting a dependent variable to one or more independent (explanatory) variables. A regression model can demonstrate whether variations in the dependent variable are related to variations in one or more explanatory variables. Regress is derived from the Latin word "regressus," which means to return (to something). Regression is the method that, in this way, enables "going back" from muddled, difficult-to-interpret data to a clearer and more significant model.
Learn more about regression here:
https://brainly.com/question/15404525
#SPJ4
The equilibrium constant, K, determines the position of equilibrium in an esterification reaction. Which of these K values describes the most efficient reaction?
a) K = 0.0056
b) K = 5.4
c) K = 0.079
d) K = 1
Answer:
The correct answer is "d) K = 1."
Explanation:
This is because a value of K = 1 indicates that the reaction has reached equilibrium, meaning that the rates of the forward and reverse reactions are equal and the concentration of reactants and products is not changing. This is the most efficient state for the reaction because it means that the maximum amount of product has been produced with the least amount of reactant consumed. By contrast, values of K less than 1 indicate that the reaction has not yet reached equilibrium, and the concentration of reactants and products is still changing. This means that the reaction is not yet efficient, and more reactants will be needed to produce the same amount of product. Finally, values of K greater than 1 indicate that the reaction has passed equilibrium, and the concentration of products is starting to decrease. This means that the reaction is no longer efficient, and the excess products will be wasted.
Jack suggests that substances burn because they contain a fiery liquid substance he calls phlogiston. His __ explains why there are visible flames around a burning substance (that's the phlogiston escaping) and also why most burning substances lose weight when they burn (the phlogiston escapes).hypothesis
His hypothesis explains why there are visible flames around a burning substance (that's the phlogiston escaping) and also why most burning substances lose weight when they burn (the phlogiston escapes).
What is hypothesis?Hypothesis is defined as the statement that is being made by a researcher between two or more variables which can further be tested using experimentation.
The characteristics of hypothesis include the following:
It should be a clear statement without bias.It should bear scope that allows further testing.It should specify variables between which the relationship is to be established.The hypothesis of Jack can be said to contain two variables and their relationship, such as visible flames and phlogiston.
His hypothesis gave room for further testing to prove that there are visible flames around a burning substance (that's the phlogiston escaping) and also why most burning substances lose weight when they burn (the phlogiston escapes).
Learn more about hypothesis here:
https://brainly.com/question/27809115
#SPJ1
Using the thermodynamic information in the ALEKS Data tab; calculate the standard reaction free energy of the following chemical reaction: P4010 (s)+6H,0 () _ 4H,PO4Round your answer to zero decimal places_
The standard reaction free energy of the following chemical reaction is -399.4 KJ/mol.
Define standard reaction free energy.
The distance between the standard-state and equilibrium is determined by the standard-state free energy of reaction. Go is influenced by the reaction's temperature.
The chemical reaction is given as,
P4O10 (s)+6H2O (l) _ 4H3PO4(s)
Standard free energy change,
ΔG rxn = ∑ ΔG (product)- ∑ ΔG (reactant)
ΔG rxn = 4 x ΔG (H3PO4)- [ΔG (P4O10) + 6 ΔG (H2O)
ΔG rxn = 4 (-1124.3) - [-2675.2 + 6 (-237.1)]
ΔG rxn = -399.4 KJ/mol
Therefore, the standard reaction free energy of the following chemical reaction is -399.4 KJ/mol.
To learn more about standard reaction free energy from the given link.
https://brainly.com/question/8169292
#SPJ4
Carbonated beverages are infused withnitrogen gascarbon dioxide gasoxygen gasxenon gas
Drinks that have carbon dioxide dissolved in the water are referred to as carbonated beverages. The presence of this gas causes the liquid to froth and bubble.
Carbonation can happen underground naturally or artificially by applying pressure. Spring water, beer and soda, and pop are a few examples of carbonated beverages. Additionally, when carbon dioxide gas is absorbed in a liquid, such as spring water, which absorbs CO2 from the subsurface, carbonation can happen naturally. Beer is another naturally carbonated beverage because the brewing process produces carbon dioxide. soda with carbonation. There are several reasons why beverages are carbonated.
The carbon dioxide that the carbonated beverage is made up of is primarily taken into account while evaluating its qualities. Between myth and reality: carbonated beverages and the gastrointestinal system.
To learn more about carbonated beverages please click on below link
https://brainly.com/question/2029096
#SPJ4
Propranolol is metabolized to a number of metabolites, the primary metabolite in man being napthoxylactic acid: Utilizing your knowledge of drug metabolism principles, describe the metabolic reactions involved.
Initial metabolism of propranolol occurs primarily through three pathways: glucuronidation (17%), side chain oxidation (20%), and ring oxidation (around 33% of dosage).
A beta blocker is a category of medication that includes propranolol. Propranolol functions similarly to other beta blockers by altering how your body reacts to certain nerve impulses, particularly those in the heart. It lowers your heart rate and makes it simpler for your heart to flow blood throughout your body.
Infants, children, and adults without diabetes may also experience low blood sugar as a result of this medication. This is particularly probable following extended periods of exercise or if you have kidney issues. Propranolol should not be taken by anyone who has asthma or other respiratory issues. Your asthma may deteriorate as a result.
To learn more about propranolol. Please visit the below link.
https://brainly.com/question/29309921
#SPJ4
Cells that have a high level of reactive oxygen species would need which of the following pathway(s) to be active in order to reduce the high level of oxidative stress?
A. Oxidative Phase of PPP
B. Non-Oxidative Phase of PPP
C. Glycolysis
D. Gluconeogenesis
More NADPH --> oxidative phase
non-oxidative phase--> fructose 6- bisphosphate and 3 glyceraldehyde
gluconeogensis: convert it to fructose 6- bisphosphate and 3 glyceraldehyde to make even more glucose
Since the cell needs high levels of NADPH. The pathways that would provide the most NADPH would be the oxidative phase of PPP, the non-oxidative phase of PPP producing fructose 6-phosphate and glyceraldehyde 3-phosphate, and gluconeogenesis using fructose 6-phosphate and glyceraldehyde 3-phosphate to produce more glucose 6-phosphate that can be used to generate more NADPH.
The oxidative segment PPP is the pathway(s) to be active in order to reduce the high level of oxidative stress.
This segment is made up of two irreversible steps: Step 1: Glucose-6-phosphate is oxidized to shape lactone. NADPH is produced as a byproduct of this response as NADP +begin superscript, plus, cease superscript is decreased as glucose-6-phosphate is oxidized.
More NADPH --> oxidative phasenon-oxidative segment--> fructose 6- bisphosphate and three glyceraldehydegluconeogensis: convert it to fructose 6- bisphosphate and three glyceraldehyde to make even extra glucose
Since the mobileular wishes excessive ranges of NADPH. The pathways that might offer the maximum NADPH will be the oxidative segment of PPP, the non-oxidative segment of PPP generating fructose 6-phosphate and glyceraldehyde 3-phosphate, and gluconeogenesis the usage of fructose 6-phosphate and glyceraldehyde 3-phosphate to provide extra glucose 6-phosphate that may be used to generate extra NADPH.
Read more about glycolysis;
https://brainly.com/question/28874793
#SPJ4
Consider the reaction: 2H20l^2H2(g) +02(g) Using standard thermodynamic data at 298K, calculate the free energy change when 2.47 moles of H20) react at standard conditions. xn
The free energy change when 2.47 moles of H20) react at standard conditions is -585.884 KJ/mol.
[tex]\Delta G reaction = \Delta G of product - \Delta G of reactant[/tex]
[tex]\Delta G of H2 (g) = 0 kJ/mol , \Delta G of O2(g) = 0 KJ/mol , \Delta G of H2O(l) = -237.2 KJ/mol[/tex]
[tex]\Delta G of reaction[/tex] = (2 x 0+ 0) + ( 2 * -237.2)
= 0 + (- 474.4)
= -474.4 KJ/Mol
[tex]\Delta[/tex]G of reaction for 2 moles of water = -474.4 KJ/mol
[tex]\Delta[/tex]G of reaction for 2.47 moles water = -474.4 * 2.47/2
= -585.884 KJ/mol
As there are 2 moles of hydrogen gas and 1 mole of oxygen gas in the product but only 2 moles of liquid in the reactant. Therefore the entropy of the reaction is increasing in the product. Hence the reaction is Product favored.
[tex]\Delta G of reaction = \Delta H - T\Delta S[/tex]
485 KJ = 571.6 KJ - 265 [tex]\Delta S[/tex]
485 - 571.6 = -265[tex]\Delta S[/tex]
-86.6 = -265[tex]\Delta S[/tex]
-86.6/-265 = [tex]\Delta S[/tex]
0.32679 KJ/mol =[tex]\Delta S[/tex]
0.32679 *1000 =[tex]\Delta S[/tex]
326.79 J/K = [tex]\Delta S[/tex]
[tex]\Delta[/tex]S for 2 moles of water is =326.79 J/K
[tex]\Delta[/tex]S for 2.47 moles of water = 326.79 * 2.47/ 2
[tex]\Delta S[/tex] = 403.58 J/ K
Learn more about The reaction here:- https://brainly.com/question/11231920
#SPJ4
when determining the absolute age of a rock, scientists measure the radioactive decay of isotope to isotope. this process is called dating.
i) Absolute dating method is used to measure absolute age of a rock using radioactive decay of isotope.
ii) The working of this Absolute dating was discussed below:
Working of absolute datingBy monitoring the radioactive decay of isotopes or the effects of radiation on the crystal structure of minerals, absolute dating techniques estimate the amount of time since rocks first formed. To help establish the age of rocks, paleomagnetism measures the ancient orientation of the Earth's magnetic field.
To know more about paleomagnetism click on below link:
https://brainly.com/question/3649885#
#SPJ4
Complete question:
To determining the absolute age of a rock, scientists measure the radioactive decay of isotope
i) What is name of this method?
ii) How this method works?
Question 3 (6 points)
Magnesium metal reacts quantitatively with oxygen to give magnesium oxide, MgO. If 5.00 g of Mg and 5.00 g of O2 are allowed to react, what weight of MgO is formed, and what weight of which reactant is left in excess?
Question 4 (6 points)
Mr.T thinks the windows need cleaning (instead of preparing his lesson), (What a mistake!). So instead he starts cleaning his office because it is a disaster. He pulls out the ammonia (NH3) and gets to work. It takes him 5 hours!! During that time he decides to do a little chemistry, because he doesn't want to fall behind. He weighs his bottle of ammonia before (32.3g) and after (30.7g) he cleans. Using this information, he calculates how many atoms are present in the ammonia he used during cleaning.
Question 5 (6 points)
Mr.T keeps getting in trouble for not cleaning his plate completely after supper every night. He argues that it is because there is water-insoluble compounds on his plate so the water won't clean it. Being the cheeky chemist that he is he comes up with a method to make carbon disulfide, a natural solvent for water-insoluble compounds like fats, oils, and waxes. He is going to make millions!! The unbalanced reaction is shown below. When 27.5 g of carbon reacts with 235 g of sulfur dioxide, what mass of carbon disulfide can Mr.T make? Balance the following equation and use it to determine the limiting reagent in order to answer the problem.
To produce MgO, two moles of Mg are required for one mole of oxygen gas. The number of moles of O₂ in 5 g is 0.15 and needs 0.31 moles of Mg. But there is only 0.20 moles of Mg in 5 g. Hence, 0.11 mole of oxygen goes excess.
What is magnesium oxide?Magnesium oxide is formed by the reaction of Mg metal with oxygen gas as written below:
[tex]\rm 2Mg + O_{2} \rightarrow 2 MgO[/tex]
Mass of Mg = 24 g/mol
number of moles in 5 g = 5/24 = 0.20
mass of oxygen = 32 g/mol
number of moles in 5 g = 5 /32 = 0.156
one mole of oxygen gas needs 2 moles of Mg. Hence, 0.15 moles needs 0.31 moles. There is only 0.20 moles. Hence Mg is the limiting reactant. And oxygen goes excess by 0.11 moles.
Two moles of Mg produces 2 moles of MgO. Hence, 0.208 moles produces 0.20 moles or 8.32 g of MgO (molar mass- 40 g/mol).
To find more on MgO, refer here:
https://brainly.com/question/29769894
#SPJ1
Which of the following amino acids would most likely be found on the exterior of a protein molecule, interacting with an aqueous environment?A. valineB. serineC. alanineD. prolineE. leucine
(Option B.) Serine is an amino acid that is found on the exterior of a protein molecule, interacting with an aqueous environment. This is because serine has a non-polar side chain that is hydrophilic, allowing it to interact with the aqueous environment.
Amino Acids Found on the Exterior of a Protein Molecule Interacting with an Aqueous EnvironmentOption B. SerineSerine is an amino acid that is found on the exterior of a protein molecule and interacts with an aqueous environment due to its non-polar side chain that is hydrophilic. This allows it to bind with water molecules, giving it an affinity for aqueous environments. As a result, Serine is the most likely amino acid to be found on the exterior of a protein molecule, interacting with an aqueous environment. It is also important in many biological processes, such as protein synthesis, as it is essential for the formation of peptide bonds.
Learn more about Amino acid: https://brainly.com/question/2526971
#SPJ4
Starting with a primary alkyl bromide, which of the following results in an overall decrease in the length of the carbon skeleton by one carbon? a) substitute bromide with methoxide b) eliminate hydrogen bromide to produce an alkene, then cleave the double bond c) substitute bromide with acetylide, then reduce the alkyne to an alkene d) substitute bromide with acetylide, then cleave the triple bond
The number of carbons that are immediately surrounding the carbon to which the halide group is connected determines whether alkyl halides are primary, secondary, and tertiary. Therefore, the correct option is option B.
What is alkyl halide?Haloalkanes are another name for alkyl halides. Alkyl halides are substances in which halogen atoms have taken the place of hydrogen atoms in an alkane. The halogens can be chlorine, bromine, fluorine etc.
Starting with a primary alkyl bromide, if we want to reduce the length of the carbon skeleton by one carbon then we need to eliminate hydrogen bromide to produce an alkene, then cleave the double bond.
Therefore, the correct option is option B.
To learn more about alkyl halide, here:
https://brainly.com/question/17063582
#SPJ1
When aqueous solutions of ki (aq) and pb(no3)2(aq) are mixed, an insoluble salt forms. which one of the following is the net ionic equation which describes this reaction?
Lead nitrate (Pb(NO3)2) and potassium iodide (KI) two solutions react to form soluble potassium nitrate (KNO3) and insoluble lead iodide (PbI2). This manifests itself in the solution as a yellow precipitate. This is Precipitation Reaction.
What is Precipitation Reaction?
Burning, corrosion, food preparation, and digestion are typical examples of these reactions. Precipitation reactions are a significant family of chemical reactions. Two distinct soluble salts that are in aqueous solutions mix in these reactions to create two products. One of these products, which is referred to as the "precipitate," is insoluble in the solution and precipitates out.
In The term "precipitation reaction" refers to a "chemical process occurring in an aqueous solution when two ionic bonds join, resulting in the production of an insoluble salt." The insoluble salts produced by precipitation processes are known as precipitates.
The creation of insoluble salts that precipitate out of the solution results from these reactions when two or more solutions with various salt concentrations are mixed.
The chemical reaction between potassium chloride and silver nitrate, in which solid silver chloride is precipitated out, is one of the greatest examples of precipitation reactions.
Learn more about Precipitation Reaction from given link
https://brainly.com/question/13016165
#SPJ4
a proton is created in the electron transport chain where protons move from the to the through an enzyme called where is made.
In the electron transport chain, a proton is produced as protons flow from one to the other through an enzyme called ATP synthase.
ATP synthase works in the F1 sector to create ATP from ADP and inorganic phosphate (Pi). Energy from a gradient of protons that pass through the inner mitochondrial membrane from the intermembrane gap into the matrix through the Fo section of the enzyme makes this possible.
During the process of cellular respiration, an enzyme called ATP synthase produces adenosine triphosphate (ATP) directly. The primary energy molecule used by cells is ATP.
The process of making ATP entails the movement of electrons from the intermembrane region back to the matrix via the inner membrane. The pH difference between the membrane's two sides is caused by the transport of electrons from the matrix to the intermembrane gap (about 1.4 pH units).
To learn more about ATP synthase. Please visit the below link.
https://brainly.com/question/12454295
#SPJ4
the (partial) pressures of nitrogen (n2) and hydrogen (h2) that are left at the end of the reaction. *hint: one of these amounts is readily determined.
The partial pressure of nitrogen N2 and hydrogen H2 that are left at the end of the reaction is 5 atm and 1 atm respectively.
Each gas in a mixture of gases has a partial pressure, which is the pressure that would exist if that gas alone filled the entire volume of the original combination at the same temperature. Dalton's Law states that the overall pressure of a perfect gas mixture is equal to the sum of the partial pressures of its constituent gases. The partial pressure of a gas serves to measure its molecules thermodynamic activity. Instead of their concentrations in liquids or other gas mixtures, gases react, distribute, and dissolve according to their partial pressures. In interactions between gases and biological chemicals, this property of gases generally holds true. As a result, volume, rather than weight or mass, is used to describe mixture ratios, such as those of breathing 20% oxygen and 80% nitrogen. This is true for a very broad range of varying oxygen concentrations found in different inhaled breathing gases or dissolved in blood. [3] Additionally, the partial pressures of oxygen and carbon dioxide are important considerations in arterial blood gas measurement. However, identical pressures can also be found in other fluids, such as cerebral fluid.
To know more about partial pressure please refer: https://brainly.com/question/15075781
#SPJ4
Based on valence bond theory, which statement best describes the electron geometry, bonding and hybridization of the central atom in carbon tetrachloride? The electron geometry of carbon in carbon tetrachloride is tetrahedral with a sp3 hybridization.
Based on valence bond theory, which statement best describes the electron geometry, bonding and hybridization of the central atom in carbon tetrachloride? The electron geometry of carbon in carbon tetrachloride is tetrahedral with a sp3 hybridization.
The bonding in carbon tetrachloride involves the overlap of the valence orbitals on the carbon atom with the valence orbitals on the four chlorine atoms. The hybridization of the carbon atom in carbon tetrachloride is sp3, meaning that the four valence orbitals on the carbon atom are mixed together to form four equivalent sp3 hybrid orbitals. These hybrid orbitals are used to form the four bonds with the chlorine atoms. Therefore, the statement "The electron geometry of carbon in carbon tetrachloride is tetrahedral with a sp3 hybridization" accurately describes the electron geometry, bonding, and hybridization of the central atom in carbon tetrachloride.
to know more about hybridization-
https://brainly.com/question/23038117
#SPJ4
in an oxide of tungsten, the oxygen anions (o2-) are located halfway along all of the edges of the cubic unit cell, and the tungsten cations occupy positions at each corner of the unit cell. the density of the oxide is 6.013 g/cm3. the molar mass of w is 183.80 g/mol and the molar mass of o is 16.00 g/mol. (a) Provide the empirical formula of the oxide.
(b) Calculate the lattice parameter of the cubic unit cell.
The Edge length of unit cell is 4*10⁻⁸ cm.
What is tungsten?
Chemical element tungsten (W), often known as wolfram, is a Group 6 (VIb) refractory metal that is incredibly strong and is used to make lamp filaments and to boost the hardness and strength of steels.
What is cations ?
A positively charged cation is an atom or molecule with more protons than electrons. Eg: Na+ 3. An anion is an atom or molecule that is negatively charged, meaning it contains more electrons than protons.
O⁻²⇒ mid of all edges
no.of ion shared from 1 edge = 1/4
total edges = 12
total o⁻² ions = 12*1/4
total o⁻² ions = 3
tungsten caution ⇒ each corner
no.of ions shared from corner = 1/8
total corner = 8
total tungsten ion = 8*1/8
total tungsten ion = 1
empirical formula = wo₃
b) density = Z*M/Na * a³
Here, Z= 1( number of molecule in 1 Unit cell)
M= molar mass of WO₃= 231.84 gm / mole
Na = Avogadro number = 6.022*10²³
a= edge length
6.013= 1*231.84/ 6.022*10²³ *a³
a³= 231.84 * 10⁻²³ / 6.013 * 6.022
a³= 6.403 * 10⁻²³
a³= 6.403 * 10⁻²⁴
a= 4*10⁻⁸ cm
Therefore, the Edge length of unit cell is 4*10⁻⁸ cm.
Learn more about tungsten from the given link.
https://brainly.com/question/29624740
#SPJ4
all of the following statements are true except some enzymes change shape and regular molecules either activators or inhibitors. enzymes are carbohydrates. enzymes are very sensitive
The invalid option is Enzymes are carbohydrates. Because the enzymes are generally proteins.
Enzymes are the protein molecules. Enzymes are the biological catalyst which can increases the rate of reaction by lowering the activation energy for the reaction by combining with the reagents but without undergoing any permanent chemical change.
Enzymes lower the activation energy necessary for the reaction to occur. This allows the reaction to happen more quickly than it would without an enzyme present.
The enzyme is not destroyed during the reaction and can be reused.
So, we can state that the wrong answer is enzymes are carbohydrates.
To learn more about Enzymes, Here :
https://brainly.com/question/13554219?referrer=searchResults
#SPJ4
Arrange the compounds below in decreasing order of the ionic character of the bonds in them. That is, pick 1 for the compound with the most ionic bonds, pick 2 for the compound with the next most ionic bonds, and so on. PC13 (Choose one) Cl2 (Choose one) Cscl (Choose one) SCI4 (Choose one)
According to the ionic character of the bonds in the given compound, The descending order is CsCl > PCl3 > SCl4 > Cl2 .
Ionic character is the measurement of polarity of the bond which can be calculated using the electronegativity of the cation and anions in the compound by substracting electronegativity of anion with electronegativity of cation.
Greater the difference between electronegativity of cations and anions then greater the polarity and greater the ionic character.
As the anion is chloride which is common in all the above molecules like PCl3, Cl2, CsCl and SCl4. Hence the smaller the electronegativity value of cation greater the polarity i.e. large the difference of electronegativity between cations and anions.
Ionic character of PCl3 = Electronegativity of chlorine - Electronegativity of Phosphorous = 3.0 - 2.1 = 0.9
Ionic character of Cl2 = 3-3 = 0
Ionic character of CsCl = 3-0.7 = 2.3
Ionic character of SCl4 = 3-2.5 = 0.5
From above calculations we can say that :
CsCl > PCl3 > SCl4 > Cl2 ( decreasing order of ionic character)
Learn more about Ionic Character here :
https://brainly.com/question/7317183
#SPJ4