Can someone explation for me ? I can’t understand.
Thanks

Answer:

The magnification of the microscope is equal to the magnification of the ocular lens times the magnification of the objective lens. Since the objective lens has 10x printed on them at "low power". The total magnification would be 10 times 10.

Explanation:

i hope this helps C:

Answer:

I,II, III

Explanation:

Firstly, the magnitude of nuclear charge affects the first ionization energy of an element. Hence,as effective nuclear charge increases, the attraction between the nucleus and the outermost electron increases and ionization energy consequently increases. Thus Mg has a higher first ionization energy than Be.

Secondly, oxygen has an electron configuration of 1s2 2s2 2p4 while nitrogen has an electron configuration of 1s2 2s2 2p3. Now, recall that extra energy is often associated with half filled orbitals hence nitrogen has a higher first ionization energy than oxygen. Furthermore, the addition of electron to an already half filled 2p orbital in oxygen (pairing) leads to inter electronic repulsion and drastic fall in first ionization energy. Therefore, as we move from nitrogen to oxygen in the periodic table, greater inter-electron repulsion between two electrons in the same p-orbital counter balances the increase in effective nuclear charge hence nitrogen has a greater first ionization energy than oxygen.

Lastly, the 3p orbital is far away from the nucleus hence we expect it to feel less of nuclear attraction than a 2p orbital. Hence the first ionization energy of Ar is less than that of Ne.

Answer:

Waves are any vibration that transfers energy from place to place.

Explanation:

IM NOT SURE ABOUT THE VIBRATION BIT BUT I AM ABOUT THE ENERGY

Answer:

C. equals the mass of 1 mL of water at 4°C

Explanation:

Answer:

m = 455,6 g

Explanation:

The mass can be determined by calculating the amount of substance times the molar mass:

m = n * M

To do this, you first have to calculate the molar mass of sodium oxalate. It is made up of the molar masses of the individual atoms. The molecular formula of sodium oxalate is:

[tex]Na_{2}C_{2}O_{4}[/tex]

M(Na) = 23 g/mol; M(C) = 12 g/mol; M(O) = 16 g/mol

M(Na2C2O4) = 2 * M(Na) + 2 * M(C) + 4 * M(O)

M(Na2C2O4) = 2 * 23 g/mol + 2 * 12 g/mol + 4 * 16 g/mol

M(Na2C2O4) = 134 g/mol

m = n * M

m = 3,4 mol * 134 g/mol

m = 455,6 g

Answer:

i did this in school :) but Hot water will rise to the top because it is less dence and cold water will sink to the bottom because it is more dence

Explanation:

Answer:

4.98/5 = 0.996 (don't forget to add your units)

Explanation:

Density= Mass/Volume

4.98/5= 0.996 (don't forget to add your units)  

Answer:

Chemical energy is energy stored in the bonds of chemical compounds, like atoms and molecules. This energy is released when a chemical reaction takes place. Usually, once chemical energy has been released from a substance, that substance is transformed into a completely new substance.

Explanation:

Answer:

epithelial tissue, connective tissue, muscle tissue, and nerve tissue

Explanation:

Answer:

Hydrogen.

Explanation:

You've probably seen "[tex]H_{2}0[/tex]" which is the formula for water. It means that there's 2 hydrogen atoms, and one oxygen atom, in one molecule of water.

Hope this helps! Feel free to mark me Brainliest if you feel this helped. :)

Answer:

the answer is H. (hydrogen)

Answer:

Boiling

Explanation:

would be your answer because it releases other cells out and causes the needy of cells to evaporate and sink.

sublimation is the phase transition do molecules move directly from a state involving vibration of particles in a fixed position to a state involving random movement of high-speed particles.

In the process of printing sublimation shirts, an image is first printed on a special sheet of paper before being transferred to a different material, typically polyester or a polyester blend. After that, heat is applied to the ink until it fuses with the fabric.

Sublimation shirt printing is more expensive than other procedures, but it produces shirts that stay longer and don't peel or crack over time.

he primary distinction between sublimation and heat transfer is that during sublimation, just the ink transfers to the substrate. A transfer layer is frequently also transferred to the material during the heat transfer procedure.

Therefore, sublimation is the phase transition do molecules move directly from a state involving vibration of particles in a fixed position to a state involving random movement of high-speed particles.

To learn more about Sublimation, refer to the link:

https://brainly.com/question/29304516

#SPJ7

Answer:

3 - coefficient

2 subscripr

6 total #

cl- element symbol

Answer:

Sum of both value is  101.63 km

Explanation:

Given data:

1st value = 92.2 km

2nd value = 9426 m

Sum of both value in km = ?

Solution:

We know that there are 1000 m in 1 km. Thus,

   92.2 km + 9426 m/1000 m × 1 km   = 101.63 km

Thus, sum of both value is  101.63 km

Answer:

d. Sulfur and chlorine.

Explanation:

A covalent bond is formed by two non-metals with similar electronegativities. As a consequence, they share one or more pairs of electrons between their nuclei.

Which of the following pairs of elements is most likely to share one or more pairs of electrons between  their nuclei?

a. Lithium and iodine. NO. Lithium is a metal and iodine a non-metal.

b. Sodium and lead. NO. Both sodium and lead are metals.

c. Copper and oxygen. NO. Copper is a metal and oxygen is a non-metal.

d. Sulfur and chlorine. YES. Both  are non-metals.

Answer:a, c, d

Explanation: just did it on edge

Answer:

When something is stable, it's fixed and steady. If you needed advice, you'd probably go to your most stable friend, the one least likely to act crazy or be easily upset.

Explanation:

Whether you're talking about an object or a person, the adjective stable implies reliability and strength. You can describe a government as stable, or a relationship, or a desk. A completely different meaning of stable is the noun "building used for housing horses or other animals." Both senses of the word come from the Latin stabilis, "firm or steadfast."

Answer:

the answer is D

Explanation:

hope it helps

Answer:

Three energy levels

The Bohr model for aluminum shows its thirteen protons and neutrons inside the nucleus, with thirteen electrons orbiting in three energy levels.

Answer:

Scatter plot

Explanation:

Because the plot is scattered all over the place

Answer:

This statement is the definition of law of conservation of mass.

Explanation:

Law of conservation of mass:

According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.

This law was given by French chemist  Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.

For example:

In given photosynthesis reaction:

6CO₂ + 6H₂O   →   C₆H₁₂O₆ +  6O₂

there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.

Let us consider the general chemical reaction.

A   +   B    →      C

5g +  5g           10g

Answer:

question 1 answer is b

Explanation:

istopes equal to same atomic number but different mass number

Answer:

One of the most important characteristics of non-vascular plants is the absence of vascular tissues. Non-vascular plants do not have the vascular tissues known as xylem and phloem. ... As they do not have any vascular tissue, they cannot retain water for long time or transport it to other parts of the plant.

Explanation:

Answer:

fern

Explanation:

Answer:

See explanation for detailed solution

Explanation:

The balanced reaction equation is Ba(NO3)2 + 2HSO3NH2 → Ba(SO3NH2)2 + 2HNO3

Number of moles of Ba(NO3)2 = 1.4 g/ 261.337 g/mol = 5.36 × 10^-3 moles

From the reaction equation;

1 mole of Ba(NO3)2 yields 1 mole of Ba(SO3NH2)2

5.36 × 10^-3 moles of Ba(NO3)2 yields 5.36 × 10^-3 moles of Ba(SO3NH2)2

For HSO3NH2

Number of moles = 2.4g/97.10 g/mol =0.0247 moles

2 moles of HSO3NH2 yields 1 mole of Ba(SO3NH2)2

0.0247 moles of HSO3NH2 yields 0.0247 ×1/2 = 0.0137 moles

Hence, Ba(NO3)2 is the limiting reactant

The theoretical yield of Ba(SO3NH2)2 is 5.36 × 10^-3 moles × 329.4986 g/mol = 1.766 g

b)

Number of moles = mass/ molar mass

Molar mass = mass/ number of moles

Molar mass = 1.6925 g/5.36 × 10^-3 moles = 315.76 g

Answer:

The specific heat of the mineral is 0.1272J/g°C

Explanation:

The sample is given energy to the calorimeter and the sample of water.

The energy released for the sample is equal to the energy absorbed for both the calorimeter and the water:

C(Sample)*m*ΔT = C(Calorimeter)*ΔT + C(water)*m*ΔT

Where C is specific heat

m is mass of the sample and water

And ΔT is change in temperature

C(Sample)*149g*(92.7°C-23.7°C) = 12.8J/K*(23.7°C-20.0°C) + 4.184J/g°C*81.4g*(23.7°C-20.0°C)

C(Sample)*10281g°C = 47.36J + 1260.1J

C(Sample) = 0.1272J/g°C

The specific heat of the mineral is 0.1272J/g°C

The energy released for the sample should be equivalent to the energy absorbed for both the calorimeter and the water:

So,

C(Sample)*m*ΔT = C(Calorimeter)*ΔT + C(water)*m*ΔT

here C is specific heat

m is mass of the sample and water

And ΔT is change in temperature

Now

C(Sample)*149g*(92.7°C-23.7°C) = 12.8J/K*(23.7°C-20.0°C) + 4.184J/g°C*81.4g*(23.7°C-20.0°C)

C(Sample)*10281g°C = 47.36J + 1260.1J

C(Sample) = 0.1272J/g°C

learn more about heat here: https://brainly.com/question/15873257

Answer:

Explanation:

shallow sea  

A shallow sea is best choice, although both are evaporites and would most likely be formed as either the sea evaporated, or in a playa setting (dry lake bed in a desert)

Answer:

oxygen and silicon

Explanation:

https://courses.lumenlearning.com/earthscience/chapter/minerals-and-mineral-groups/

"Nearly all (98.5%) of Earth’s crust is made up of only eight elements – oxygen, silicon, aluminum, iron, calcium, sodium, potassium, and magnesium – and these are the elements that make up most minerals."

Of available answers:

a) nitrogen and oxygen

b) sulfur and hydrogen

c) silicon and nitrogen

d) oxygen and silicon

Only oxygen and silicon are both included on the list

Answer:

The baking soda and vinegar react to create carbon dioxide, which inflates the balloon.

Explanation: