can somebody help?pls.
A PVC (plastic) rod is rubbed with a nylon cloth. This process causes electrons to be transferred between the rod and the cloth, causing both objects to become charged.

Which of the rows in the table below correctly gives the nature of the charges on both the cloth and the rod, and the effect the objects have on each other after becoming charged?

Answer:

-2.5 is the answer to your question

Answer:

For the first picture the answer is A. and the second picture answer is also A

Explanation:

Answer:

Part 1

C. 10 Coulombs

Part 2

A. The strength of the magnet increased as the amount of current increased.

Explanation:

1. When a voltage is applied to these plates an electrical current flows charging up one plate with a positive charge with respect to the supply voltage and the other plate with an equal and opposite negative charge.

If the capacitors are connected by a conductor they must have equal potentials. If their charges are not +/- Q there will be a potential difference and charges will flow until they are +/- .

2. Based upon the results of the experiment which is graphed, an increase in current increases the number of paperclips picked up. The increase in current produced a stronger magnetic field from the electromagnet created. The ability to pick up paperclips testifies to the strength of the magnet and this strength is because of the current emitted to the coils which in turn magnetizes the nail

Answer: Aux Ht or Auxiliary heat is the backup heat that turns on to help the compressor for first stage maintain your temperature setting. ... When the thermostat is in this position the compressor does not run, only the Emergency heat runs

Explanation:

What does auxiliary heat mean on a Honeywell thermostat.

What does aux heat mean on a Honeywell system? Short for auxiliary heat, this system is designed to heat your home up quickly instead of waiting for the cold heat pump on the exterior of your home. Unfortunately, using the auxiliary heat is significantly more expensive than using your heat pump.

Aux on the thermostat stands for auxiliary heat. Auxiliary heat is the electric heat strip in your air handler that is supplemental heat. Emergency heat is the same thing as auxiliary heat. Auxiliary heat/ Emergency heat help the heat pump keep up when cold outside or the temperature differential on the thermostat is large.

Answer: Acceleration = Force/Mass

Explanation:

F = ma

a = F/m

Acceleration = Force/Mass

Answer:

energy

Explanation:

the energy is the substance

Answer:

Medium

Explanation:

Answer:

Physical conditions like temperature and pressure affect state of matter. ... When the pressure exerted on a substance increases, it can cause the substance to condense. Decreasing pressure can cause it to vaporize. For some types of rock, decreasing pressure can also cause them to melt.

Answer:

repel each other

Explanation:

The magnitude of the charge of an electron is called... ... If a positively-charged glass rod is suspended so that it turns easily and another positively-charged glass rod is brought close to it, the two rods will... Repel each other.

Explanation:

(D) i think there you go have a good day

Answer:

1. 5 m/s

2. 5 m/s/s

Explanation:

1. 50 - 5 = 45

45/9 = 5

2. 25 - 0 = 25

25/5 = 5

hope this helps!

Answer:

what do you mean by blanks??

Explanation:

i don't get

it

Answer:

ikoon

Explanation:

i think so it ikoon

Answer:

it is c

Explanation:

the car is moving back to its original position

Answer:

The sun stays in its position at the center of our solar system. It doesn't rise and set. But it appears to rise and set because of the Earth's rotation on its axis

Explanation:

Hope this helps :)

Answer:

0. 174 A

Explanation:

This is similar to your other question

[tex]\boxed{\mathfrak{Power(P)=Voltage(V) \times Current(I)}}[/tex]

=> 40 = 230 × I

=> [tex]\mathsf{I=\frac{40}{230} }[/tex]

=> I = [tex]\mathsf{\frac{4}{23} }[/tex]

=> I = 0.174 A

I is the current, the computer draws when connected to a 230 V mains supply, and it's SI unit is Amperes.

[tex]\mathfrak{\overline{There\: you \: are!}}[/tex]

proportional to the variation of the linear momentum

(hope this helps) :)

Answer:

Sketch the situation.

b. Calculate the potential energy, the kinetic energy, and the total energy of the car as it leaves the cliff.

c. Make a graph displaying the kinetic, gravitational potential, and total energy of the car at each 10 m

increment of height as it drops

Explanation:

The potential energy of the car at that position is 10.6 x 10⁵ J.

Potential energy of an object is defined as the energy acquired by the object by virtue its position.

Here,

Mass of the car, m = 1200 kg

Speed of the car, v = 29 m/s

Height of the cliff, h = 90 m

Therefore,

Potential energy of the car, PE = mgh

PE = 1200 x 9.8 x 90

PE = 10.6 x 10⁵ J

Hence,

The potential energy of the car at that position is 10.6 x 10⁵ J.

To learn more about potential energy, click:

https://brainly.com/question/21288807

#SPJ3

Answer:

1.127,56,000m

2. 347,600,000

3. 384,000

4. 200000000

5.  16,000,000cm

6. 36,000,000cm

7. 125,000m long, 400m deep, 1,500m wide

8. 11.18km/sec

9. 5,400,000

10.  2g

11. 1,200 mg to 2700 mg

12.   158000 kg

13. 450000000 mg

14.    23,000g to 90,000g

15.   40,000 ML

16.  1,000 ML

17.  26,600 KL

18. 1,558,000 L

19. 60 ML

20. 0.947

Answer:

the density of seawater is thousand kg

Explanation:

The frictional force opposes the forward motion of the crate. The coefficient of static friction is 0.2.

Using the formula;

Fa = - Ff + mgsinθ

but Ff = μsFN and N = mgcosθ

Hence;

Fa = mgsinθ - μsmgcosθ

μsmgcosθ = mgsinθ - Fa

μk =  mgsinθ - Fa/mgcosθ

μk =  coefficient of static friction = ?

Fa = horizontal force = 100N

m = mass = 30.6 kg

θ = angle = 30°

g = acceleration due to gravity = 10 m/s^2

Substituting values;

μk =  [(30.6 × 10) sin 30°] - 100 / (30.6 kg × 10) cos 30°

μk = 153 - 100/265

μk = 0.2

Learn more: https://brainly.com/question/17237604

Answer:

[tex] s = ut + \frac{1}{2} a {t}^{2} \\ u = 0 \\ a = 4.2 \: m {sec}^{ - 2} \\ t = 10sec \\ s = 0 + \frac{1}{2} (4.2) {10}^{2} \\ = 1.2 \times 100 \\\boxed{ s = 120 \: m}[/tex]

Answer:

C

Explanation:

because C should be the correct one

Answer:

Hello, Rotting, burning, cooking, and rusting are all further types of chemical changes because they produce substances that are entirely new chemical compounds. For example, burned wood becomes ash, carbon dioxide, and water. When exposed to water, iron becomes a mixture of several hydrated iron oxides and hydroxides.

Explanation:

I hape this helps remember to make someone smile today

Answer:

can u repost the question properly

Answer:

It's a fact

Explanation:

There are different types of sciences for every problem that could happen on earth

Answer:

hope this helps!

Explanation:

Volume of the air bubble, V1=1.0cm3=1.0×10−6m3

Bubble rises to height, d=40m

Temperature at a depth of 40 m, T1=12oC=285K

Temperature at the surface of the lake, T2=35oC=308K

The pressure on the surface of the lake: P2=1atm=1×1.103×105Pa 

The pressure at the depth of 40 m: P1=1atm+dρg

Where,

ρ is the density of water =103kg/m3

g is the acceleration due to gravity =9.8m/s2

∴P1=1.103×105+40×103×9.8=493300Pa

We have T1P1V1=T2P2V2

Where, V2 is the volume of the air bubble when it reaches the surface.

V2=

Answer:

increase in hydrostatic pressure

Explanation:

he force per unit area exerted by a liquid on an object. The deeper you go under the sea, the greater the pressure of the water pushing down on you. For every 33 feet (10.06 meters) you go down, the pressure increases by one atmosphere .

Brainliest pls

Answer:

as the mass of an object is increased, the acceleration of the object is decreased & vice-versa.

Explanation:

hope this helps!