Calculating Heat from Thermochemical Equations 100 points
The balanced thermochemical equation for the combustion of methane gas is: (Picture Below)

Calculate much heat is released when 4.5 moles of methane gas undergo a combustion reaction.

The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes.

The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes. Oligotrophic lakes are generally low in nutrients and productivity, resulting in clear water, high oxygen levels, and limited biological productivity.

These  lakes are often deep and have a low rate of nutrient input, usually from sources such as rainfall or groundwater. The opposite of oligotrophic lakes is eutrophic lakes, which are high in nutrients and productivity, resulting in murky water, low oxygen levels, and high biological productivity.

Visit to know more about Oligotrophic:-

brainly.com/question/5552139

#SPJ11

The syrup moves down the bottle slowly when it is turned upside down as a result of the high viscosity, cohesion, and stickiness.

Gravity pulls the syrup downhill when the syrup bottle is turned on its side. The syrup does not, however, readily flow out of the bottle due to its high viscosity.

It is challenging for the syrup molecules to slip past one another and flow out of the bottle due to the high cohesiveness between them. Furthermore, it is challenging for the syrup to separate from the bottle and flow out due to the high adhesion between the molecules of the syrup and the surface of the bottle.

The ideas of viscosity, adhesion, and cohesion can be used to explain the syrup's gradual descent down the bottle when it is turned upside down.

The term "viscosity" describes a fluid's reluctance to flow. Syrup has a high flow resistance since it is a highly viscous liquid. Cohesion is the attraction of the same molecules, whereas adhesion is the attraction of distinct molecules.

Syrup's molecules are highly attracted to one another and to the surfaces of the bottle, resulting in high cohesion and adhesion, respectively.

learn more about viscosity here

https://brainly.com/question/2568610

#SPJ1

Any reaction that releases 265 kcal of energy can be classified as exothermic, which means that it releases energy in the form of heat.

This release of energy is typically the result of an oxidation reaction, where a substance loses electrons and becomes oxidized, while another substance gains electrons and becomes reduced. The process of oxidation can be a major source of energy in biological systems, such as during cellular respiration, where glucose is oxidized to release energy that is used by cells to carry out various functions.

A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. This is because exothermic reactions involve the release of energy, whereas endothermic reactions absorb energy. Oxidation and reduction are related to the transfer of electrons, and activation refers to the energy required for a reaction to proceed.

To know more about reduction click here

brainly.com/question/30281969

#SPJ11

Any reaction that releases 265 kcal of energy can be classified as an exothermic reaction. Exothermic reactions release energy in the form of heat, light or sound, while endothermic reactions absorb energy from the surroundings.

A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. In an exothermic reaction, energy is released in the form of heat, resulting in a net decrease in the system's total energy.

Reduction and oxidation are chemical processes that involve the transfer of electrons between molecules, but they do not necessarily involve the release or absorption of energy. Activation energy is the energy required to start a chemical reaction, but it does not determine whether a reaction is exothermic or endothermic.

To know more about Exothermic reactions :

https://brainly.com/question/28546817

#SPJ11

Starting with a 2n=32 cell, at the end of meiosis II there will be four cells, each n=16.

Starting with a 2n=32 cell, meiosis will result in the formation of four cells at the end of meiosis II. In meiosis I, the chromosome number is reduced by half from 2n to n. So, the initial 2n=32 cell will have two sets of 16 chromosomes. During meiosis I, the homologous chromosomes will separate, resulting in two haploid cells, each with n=16 chromosomes.

In meiosis II, the sister chromatids will separate, resulting in the formation of four cells. Since each cell now has only one copy of each chromosome, the chromosome number remains n=16. Therefore, the answer is four cells, each n=16.

It is important to note that meiosis results in genetic diversity due to crossing over during meiosis I and random alignment of chromosomes during meiosis II. This genetic variation is important for evolution and the survival of species. Additionally, errors during meiosis can lead to chromosomal abnormalities such as Down syndrome, which occurs when there is an extra copy of chromosome 21.

For more such questions on meiosis II, click on:

https://brainly.com/question/30150685

#SPJ11

NaCl and KBr crystals that are used in cell holders in IR spectroscopy should be kept away from aqueous solutions because it will be evaporated while its spectrum is being obtained.

Generally Infrared Spectroscopy is defined as the analysis of infrared light interacting with a molecule. Basically, this spectroscopy can be observed in three ways by measuring absorption, emission and reflection. So, the main use of this technique is found in the organic and inorganic chemistry. IR spectroscopy is basically used by chemists to determine functional groups present in the molecules.

Basically, volatile liquid can't be prepared with this method, because volatile liquid gets evaporated while its spectrum is being obtained. For instance, if the liquid sample is toxic or smelly, we should not use this method. Therefore, NaCl and KBr are dissolved into water, and thus they can't be used for aqueous samples.

Learn more about IR spectroscopy from the link given below.

https://brainly.com/question/28523860

#SPJ4

A muonic atom is created when a muon, which has a mass of 105.7 MeV/c, combines with a proton. Muons and electrons are similar in nature, but muons are more massive than electrons.

Answers of the given questions are below :

(a) The radius of the first Bohr orbit of a muonic atom can be calculated using the formula for the Bohr radius:

r = ε₀h² / πmeμ

where ε₀ is the vacuum permittivity, h is Planck's constant, me is the mass of the electron, and μ is the reduced mass of the muonic atom.

Using the given mass of the muon and the mass of the proton, we can calculate the reduced mass:

μ = meMp / (me + Mp) = 186.6 MeV/c²

Substituting the values and solving for r, we get:

r = 0.00054 nm

(b) The magnitude of the lowest energy state can be calculated using the formula:

E = -μe⁴/8ε₀²h²n²

where e is the elementary charge and n is the principal quantum number.

For n=1, we get:

E = -207.2 eV

(c) The shortest wavelength in the Lyman series can be calculated using the formula:

1/λ = R∞(1/n₁² - 1/n₂²)

where R∞ is the Rydberg constant and n₁ and n₂ are the initial and final quantum numbers, respectively.

For the Lyman series, n₁=1 and n₂=2. Substituting the values and solving for λ, we get:

λ = 187.5 nm

To know more about the muonic atom refer here :

https://brainly.com/question/28529640#

#SPJ11

The molecule that has a trigonal-pyramidal molecular geometry is B. [tex]NH_{3}[/tex]

To understand why [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry, we need to look at its Lewis structure. The nitrogen atom has five valence electrons, and each hydrogen atom has one valence electron. Therefore, the total number of valence electrons in [tex]NH_{3}[/tex] is 8. In the Lewis structure, the nitrogen atom is placed in the center with three hydrogen atoms surrounding it, each forming a single covalent bond with the nitrogen atom. This structure has one lone pair of electrons on the nitrogen atom.

To determine the molecular geometry, we use the VSEPR theory, which states that electron pairs around a central atom will arrange themselves in such a way as to minimize repulsion. In [tex]NH_{3}[/tex], there are four electron pairs around the nitrogen atom - three bonding pairs and one lone pair. The bonding pairs repel each other, as do the lone pair and bonding pairs. The repulsion causes the molecule to take on a trigonal-pyramidal shape, with the three hydrogen atoms at the base and the lone pair at the apex of the pyramid.

In summary, [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry because of the repulsion between the bonding and lone pairs of electrons around the nitrogen atom. Therefore, Option B is correct.

Know more about Lewis Structure here:

https://brainly.com/question/20300458

#SPJ11

Option(A) and option(B) are the options that are correctly describe the electronic configuration 1s²2s²2p⁴, that is oxygen and N⁻ atoms.

In a modern periodic table which is organized by increasing atomic number. The atomic number is refer as the number of electrons present in the ground state of atom. Thus, the electronic configuration can be used to identify the atoms or ions. The electronic configuration is used to describe the distribution of electrons in different energy level around the nucleus. We have an electronic configuration is written as 1s²2s²2p⁴.

Hence, required answer are option(A) and (B).

For more information about electronic configuration, visit:

https://brainly.com/question/21977349

#SPJ4

Complete question:

Select all the options that correctly describe the electron configuration 1s^2 2s^2 2p^4

A) Oxygen

B) [tex]N^{ -}[/tex]

C) [tex]O^{2 -}[/tex]

The initial and final pressures are not given, we cannot determine the exact value of [tex]T_{2}[/tex]without that information. The pressure values would be needed to complete the calculation.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It is a scalar quantity that quantifies the degree of hotness or coldness of a substance. Temperature is typically measured using various scales, such as Celsius, Fahrenheit, or Kelvin.

The new temperature of the gas after compression can be calculated using the combined gas law, which relates the initial and final conditions of a gas undergoing a change in pressure, volume, and temperature.

The combined gas law is given by:

We can rearrange the equation to solve for [tex]T_{2}[/tex]:

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be 277.05K

What is ideal gas law ?

The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles (a) do not interact with one another and (b) occupy no space (have no volume).

The law states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.

V1/T1 ⇒ V2/T2

V1 ⇒ 560ml

T1 ⇒ 43.0 C

V2 ⇒ 52ml

T2⇒?

T2 ⇒ V2T1/V1

T2 ⇒ 52*43/560

T2 ⇒ 3.9 degree C i.e. 277.05K

To learn more about ideal gas law use:

https://brainly.com/question/1056445

#SPJ1

Answer:zinc

Explanation:zinc is more reactive than hydrogen

Chemical leaveners, such as baking powder and baking soda, are commonly used in muffin recipes to provide a light, airy texture.

Baking powder is a combination of an alkaline compound (typically sodium bicarbonate) and an acidic compound (such as cream of tartar), while baking soda is pure sodium bicarbonate.

These leaveners work through a chemical reaction that releases carbon dioxide gas when combined with moisture and heat during the baking process.

The gas forms bubbles in the batter, causing it to expand and rise, resulting in a fluffy, tender muffin. The choice of leavening agent depends on the ingredients and desired taste, as baking soda requires an acidic component (like buttermilk) to activate,

while baking powder is self-contained and works with non-acidic liquids. In summary, chemical leaveners are essential for creating the desired texture in muffins by producing gas bubbles that cause the batter to rise.

To learn more about : leaveners

https://brainly.com/question/30762079

#SPJ11

The device that serves the same function as the packing is mechanical seal . Option (c) is correct.

Packing is the most common form of sealing used in controlling devices. A mechanical seal is considered as a method in which fluid is contained in a vessel for example: pumps and mixers, where one rotating shaft passes through one stationary housing. Mechanical seal is of comparatively low cost. These kind of seals lasts longer than packing.

Therefore, mechanical seals are generally preferred over the commonly used traditional packing seals in applications which controls or prevents leakage problems .Some other advantages of  mechanical seals are that these seals are more durable and they use multiple sealing points in order to eliminate any kind of  leakage.

Thus, the correct option is (c)

To know more about packing seal here

https://brainly.com/question/17404727

#SPJ4

Coal emits the most carbon dioxide when burned. Coal is a fossil fuel that is commonly used in power plants to generate electricity.

When burned, coal releases carbon dioxide as well as other pollutants such as sulfur dioxide, nitrogen oxides, and particulate matter. These emissions contribute to air pollution and climate change.

In contrast, burning natural gas emits less carbon dioxide than coal. Natural gas is composed mainly of methane, which has a lower carbon content than coal. Oil also emits less carbon dioxide than coal but more than natural gas. Burning wood also releases carbon dioxide but is considered to be carbon-neutral because the carbon dioxide released is equal to the amount absorbed by the tree during its lifetime.

However, burning wood can still contribute to air pollution and is not a sustainable long-term energy source. Overall, coal is the most carbon-intensive fossil fuel and a major contributor to climate change. The transition to cleaner energy sources such as renewable energy and natural gas can help reduce carbon emissions and mitigate the impacts of climate change.

To learn more about, carbon dioxide

https://brainly.com/question/21256960

#SPJ11

The current 0.65 A and time 20 min = 1200 seconds. We also need the atomic mass of silver Ag, which is 107.87 g/mol. Finally, we need to use Faraday's constant, which is 96,485 coulombs per mole of electrons. mass in grams = current in amperes x time in seconds x atomic mass in grams / Faraday's constant.

The mass of Ag plated out after electrolysis can be calculated using Faraday’s law of electrolysis which states that the mass of a substance produced at an electrode during electrolysis is directly proportional to the quantity of electricity passed through the cell and inversely proportional to the equivalent weight of the substance. The equivalent weight of Ag is 108 g/mol. mass = current × time × atomic weight / number of electrons × Faraday Constan where, current = 0.65 A time = 20 min = 1200 s atomic weight = 108 g/mol number of electrons = 1 since Ag+ ion gains one electron to form Ag Faraday constant = 96,485 C/mol mass = 0.65 A × 1200 s × 108 g/mol / 1 × 96485 C/mol mass ≈ 0.78 g Therefore, the mass of Ag plated out after 20 minutes is approximately 0.78 g.

learn more about electrons here.

https://brainly.com/question/6663044

#SPJ11

The term for the value corresponding to the number of atoms in 12.01 g of carbon is Avogadro's number.

Avogadro's number is defined as the number of atoms or molecules in one mole of a substance. One mole of any substance contains 6.022 x 10²³ atoms or molecules. This value is essential in chemistry as it allows scientists to relate the mass of a substance to the number of atoms or molecules present.

For example, if we know the mass of a substance, we can calculate the number of atoms or molecules present using Avogadro's number. Similarly, if we know the number of atoms or molecules present, we can calculate the mass of the substance using the molar mass.

Avogadro's number is named after Italian scientist Amedeo Avogadro, who first proposed the concept of molecules in 1811. It is a fundamental constant in chemistry and is used in many calculations, including those related to stoichiometry, gas laws, and solutions.

Learn more about Avogadro's number here: https://brainly.com/question/30340398

#SPJ11

The right response is a. 180F. In order to guarantee that the surface of the dishes and utensils reaches a temperature high enough to properly sanitise them, the final rinse water temperature of a heat sanitising warewashing machine should be at least 180F (82C). This is based on the FDA Food Code's criteria.

Water used to rinse or clean items like dishes or clothing is referred to as rinse water. To get rid of any last bits of dirt, soap, or other cleaning agents from the item being cleaned, it is frequently used as the last step in a cleaning procedure. Depending on the item being cleaned and the cleaning product being used, the rinse water might be either cold or warm. Rinse water can occasionally be recycled, such as when washing many loads of dishes or clothing, but it must still be sufficiently clean to be effective. It's crucial to properly dispose of wasted rinse water to prevent water sources from being contaminated.

Learn more about Rinse here:

https://brainly.com/question/6677548

#SPJ11

Breath analyzers can not effectively measure non potable alcohols or organic vapors because they may have different chemical properties and concentrations which can result in inaccurate readings.

Breath analyzers are designed to measure the concentration of ethanol in a person's breath to estimate their blood alcohol content (BAC). Its work by detecting and analyzing the alcohol molecules in the breath sample provided by the user.

But most breath analyzers are not capable of accurately measuring non-potable alcohols or organic vapors because their sensors are specifically calibrated to detect ethanol.

Read more about breath analyzers

brainly.com/question/13339812

#SPJ1

4000 g of neon will contain the same number of atoms as 1,000 g of bromine.

Hence, the correct option is E.

The mass of one Br atom is four times greater than the mass of one Ne atom. Therefore, the number of Ne atoms that would have the same mass as 1,000 g of Br is

(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)

To find the number of Br atoms in 1,000 g Br, we divide 1,000 g Br by the molar mass of Br

1,000 g Br / 79.904 g/mol = 12.51 mol Br

One mole of any substance contains Avogadro's number (6.02 x 10^23) of particles (atoms, molecules, etc.).

Therefore, the number of Br atoms in 12.51 mol Br is

12.51 mol Br x (6.02 x 10^23 atoms/mol) = 7.53 x 10^24 Br atoms

Now we can calculate the mass of Ne that would contain the same number of atoms as 1,000 g Br

(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)

= (7.53 x 10^24 atoms) x (79.904 g/mol) / (20.180 g/mol)

= 2.99 x 10^25 g Ne

Therefore, 4,000 g Ne (rounded to the nearest thousand) has same number of atoms as 1,000 g of bromine.

Hence the correct option is E.

To know more about neon here

https://brainly.com/question/20365054

#SPJ4

The word equation for the given reaction is:

Zinc + Copper (II) Sulfate → Copper + Zinc Sulfate

The chemical interaction between zinc (Zn) and a solution of copper (II) sulfate is described by the word equation that is presented. In this reaction, the copper ions from the copper sulfate solution are reduced, which means they gain electrons, while the zinc metal is oxidized, which means it loses electrons.

Copper (Cu) and zinc sulfate are the two products that are produced as a result of the reaction. Zinc sulfate is a white crystalline solid that is soluble in water, whereas copper is a reddish-brown metal that is solid at normal temperatures.

The stoichiometry of the reaction—that is, the proportion of reactants to products in terms of the number of moles—is revealed by the coefficients in the balanced equation.

learn more about zinc sulfate here

https://brainly.com/question/29708158

#SPJ1

Answer:

30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.

Explanation:

The balanced chemical equation for the reaction between H2SO4 and Fe(OH)3 is: Fe(OH)3 + 3H2SO4 → Fe2(SO4)3 + 3H2O According to the equation, 1 mole of Fe(OH)3 reacts with 3 moles of H2SO4. Therefore, to determine how many moles of H2SO4 are needed to react with 10.0 mol of Fe(OH)3, we need to use the mole ratio between Fe(OH)3 and H2SO4: 10.0 mol Fe(OH)3 x (3 mol H2SO4 / 1 mol Fe(OH)3) = 30.0 mol H2SO4.

Therefore, 30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.

Cobalt-60 is more likely to be used in external radiotherapy than in internal radiotherapy for the treatment of cancer.

Using a machine like a linear accelerator, external radiotherapy involves projecting high-energy radiation beams towards the tumor from outside the body. Cobalt-60 is one of the radiation sources that can be used to produce these beams.

The cobalt-60 source is housed in a device called a teletherapy unit that emits radiation beams in a precise and controlled manner. This allows the radiation to be aimed specifically at the tumor while minimizing exposure to nearby healthy tissues.

Learn more about Cobalt - 60:https://brainly.com/question/14253921

#SPJ1

The balanced chemical equation for the reaction of calcium chloride (CaCl₂) with a fatty acid (R-COOH) to form soap (R-COONa) and carbon dioxide (CO₂) is:

CaCl₂ + 2 R-COOH → R-COONa + CO₂ + 2 HCl

In this reaction, calcium chloride (CaCl₂) reacts with a fatty acid (R-COOH), which is the structure of a typical soap molecule, to form soap (R-COONa) and carbon dioxide (CO₂) as products. The balanced equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation.

To balance the equation, the coefficients of the reactants and products are adjusted. In this case, two molecules of the fatty acid are required to react with one molecule of calcium chloride to form two molecules of soap, one molecule of carbon dioxide, and two molecules of hydrochloric acid (HCl) as a byproduct.

The balanced equation represents a stoichiometric ratio between the reactants and products in the chemical reaction.

To know more about calcium chloride refer here:

https://brainly.com/question/28944725#

#SPJ11

B. The major source of sulfur dioxides is fuel combustion, such as burning coal and oil in power plants and other industrial processes.

The fundamental chemical process of releasing energy from a fuel and air combination is combustion, sometimes referred to as burning. While natural erosion of soils can release small amounts of sulfur dioxide, it is not a significant contributor to the levels we see in the atmosphere. Industrial processing, such as refining metals and producing chemicals, can also release sulfur dioxide, but to a lesser extent than fuel combustion. Road traffic can contribute to air pollution, but sulfur dioxide emissions from cars and trucks are generally lower than those from industrial sources.

Learn more about combustion here:

brainly.com/question/24703998

#SPJ11

If the concentration of B is doubled while that of A is unchanged, the reaction rate will increase by eight times. option (d) is correct

The speed at which a chemical reaction occurs to yield products is called the rate of reaction. The rate of the reaction depends on the concentration and depicts the rate of the change of the reactants into products during the chemical changes.

The reaction is shown as,

A+ 2B → P

The rate of reaction is shown as,

rate =K [A][B]³

The concentration of A is constant and of B is doubled.

Let the concentration be,

Concentration of A = 1

Concentration of B = 2

So, the rate of reaction will be,

rate =K [A][B]³

rate= K [1] [2]³

rate= 8K

When the concentration of the B is doubled i.e the concentration of B = 4

Now the rate of reaction will be,

rate =K [A][B]³

rate= K [1] [4]³

rate= 64K

Comparing the rate of the reactions we get, the ratio of 8:1.

Therefore, the factor increases by 8 times.

Option (d) is correct

To know more about reaction rate here

https://brainly.com/question/14766971

#SPJ4

The amount by which a solution's vapor pressure, freezing point, and boiling point differ from those of the pure solvent depends on the concentration of solute particles in the solution. This is known as colligative properties.

Colligative properties are physical properties of solutions that depend only on the number of solute particles in the solution, regardless of the chemical identity of the solute particles. The colligative properties include vapor pressure lowering, freezing point depression, boiling point elevation, and osmotic pressure.

For example, in the case of vapor pressure lowering, the presence of solute particles in a solution decreases the number of solvent molecules at the surface of the solution, thereby reducing the vapor pressure of the solution compared to that of the pure solvent.

The amount of vapor pressure lowering is proportional to the concentration of solute particles in the solution, but is independent of the identity of the solute particles.

Similarly, the amount of freezing point depression and boiling point elevation is proportional to the concentration of solute particles in the solution. The colligative properties are important in various fields, such as in the determination of molar mass of unknown solutes or in the process of freeze-drying of food and pharmaceuticals.

For more question on vapor pressure click on

https://brainly.com/question/30459262

#SPJ11

Reactions tend to run to completion if a product precipitated as a solid. Option B is correct.

When one of the products is taken out of the reaction mixture, reactions frequently proceed to completion. If a product is precipitated as a solid, it is no longer in the reaction mixture and is effectively removed from the system. This drives the reaction to completion in order to produce more of the solid product.

On the other hand, the physical state of a product (high melting point, liquid, or ionic) does not necessarily affect the extent to which a reaction runs to completion. While a high melting point may make it difficult to remove the product from the reaction mixture, it does not necessarily prevent the reaction from reaching completion.

Hence, B.is the correct option.

To know more about reaction mixture here

https://brainly.com/question/15541433

#SPJ4

The complete conversion of three moles of glucose by aerobic fermentation yields 6 moles of acetic acid.

Generally, aerobic fermentation or aerobic glycolysis is defined as a metabolic process by which cells metabolize sugars via the process of fermentation in the presence of oxygen and occurs through the repression of normal respiratory metabolism. This method is referred to as the Crabtree effect in yeast and also it is a part of the Warburg effect in tumor cells.

Generally, Reaction 1 of aerobic fermentation shows that 1 mole of glucose is converted to 2 moles of ethanol. And those 2 moles of ethanol are then converted in the Reaction 2 of aerobic fermentation into 2 moles of acetic acid. Hence, the complete conversion of glucose yields two acetic acid molecules per glucose molecule. Also, given that the ratio, when completely converted, three moles of glucose will yield six moles of acetic acid.

Learn more about aerobic fermentation from the link given below.

https://brainly.com/question/3928558

#SPJ4

The vapour pressure of water is 21.1 mm hg at the collection temperature,776.5 mmHg is the pressure of the collected gas.

A liquid's vapour pressure drops as the temperature drops.The link between vapour pressure and temperature is described by the Clausius-Clapeyron equation. The vapour pressure of a substance is exactly proportional to the temperature and this relationship is linear, according to the Clausius-Clapeyron equation.

To find the pressure of the collected gas, we need to subtract the vapor pressure of water at the collection temperature from the total pressure reading.
Total pressure reading = 797.6 mmHg
Vapor pressure of water at 23°C = 21.1 mmHg
Pressure of collected gas = Total pressure reading - Vapor pressure of water
Pressure of collected gas = 797.6 mmHg - 21.1 mmHg
Pressure of collected gas = 776.5 mmHg
Therefore, the pressure of the collected gas is 776.5 mmHg.

The boiling point rises as the chain length does, and the relationship between boiling point and vapour pressure is opposite.

Learn more about vapour pressure here

https://brainly.com/question/2510654

#SPJ11

If the primary concern for a structure is fire resistance, one should use B.

Answer - If the primary concern for a structure is fire resistance, one should use heavy timber framing. This type of framing is made up of large, solid wood members that can withstand high temperatures and remain stable in case of a fire. that have a slower burn rate and better fire resistance compared to other framing techniques.Post and beam framing, platform framing, and balloon framing do not offer the same level of fire resistance as heavy timber framing.

to know more about fire resistance, click on this -

brainly.com/question/11471571

#SPJ11