calculate the ph of the solution resulting from the addition of 75.0 ml of 0.15 m koh to 35.0 ml of 0.20 m hcn (ka (hcn) = 4.9 × 10–10).

The pH of a 1.02 M solution of HI at 25⁰C is approximately 5.94.

the pH of a 0.035 M solution of HClO4 at 25⁰C is approximately 4.23.

(a) HI is a strong acid, meaning it completely dissociates in water. The dissociation of HI can be written as follows:

HI + H2O → H3O+ + I-

The equilibrium constant expression for this reaction is:

Ka = [H3O+][I-]/[HI]

Since HI is a strong acid, we can assume that [HI] ≈ [H3O+]. Thus, we can simplify the expression to:

Ka ≈ [H3O+]^2/[HI]

We can solve for [H3O+]:

[H3O+] = √(Ka*[HI])

The Ka value for HI is approximately 1.3 x 10^-10 at 25°C. Therefore:

[H3O+] = √(1.3 x 10^-10 * 1.02) = 1.16 x 10^-6 M

Taking the negative logarithm of this concentration gives us the pH of the solution:

pH = -log([H3O+]) = -log(1.16 x 10^-6) = 5.94

Therefore, the pH of a 1.02 M solution of HI at 25⁰C is approximately 5.94.

(b) HClO4 is also a strong acid, so we can assume that it completely dissociates in water. The dissociation of HClO4 can be written as:

HClO4 + H2O → H3O+ + ClO4-

The equilibrium constant expression for this reaction is:

Ka = [H3O+][ClO4-]/[HClO4]

Since HClO4 is a strong acid, we can again assume that [HClO4] ≈ [H3O+]. Thus, we can simplify the expression to:

Ka ≈ [H3O+]^2/[HClO4]

We can solve for [H3O+]:

[H3O+] = √(Ka*[HClO4])

The Ka value for HClO4 is approximately 1.0 x 10^-8 at 25°C. Therefore:

[H3O+] = √(1.0 x 10^-8 * 0.035) = 5.92 x 10^-5 M

Taking the negative logarithm of this concentration gives us the pH of the solution:

pH = -log([H3O+]) = -log(

5.92 x 10^-5) = 4.23

Therefore, the pH of a 0.035 M solution of HClO4 at 25⁰C is approximately 4.23.

Visit to know more about pH:-

brainly.com/question/172153

#SPJ11

The pH of the buffer is approximately 5.145.

To determine the pH of the buffer containing 0.17 mol of propionic acid ([tex]C_2H_5COOH[/tex]) and 0.22 mol of sodium propionate ([tex]C_2H_5COONa[/tex]) in 1.20 L, we can follow these steps:

Step 1: Calculate the concentrations of propionic acid and sodium propionate.
[Propionic acid] = (0.17 mol) / (1.20 L) = 0.1417 M
[Sodium propionate] = (0.22 mol) / (1.20 L) = 0.1833 M

Step 2: Determine the acid dissociation constant (Ka) for propionic acid.
The Ka for propionic acid is 1.3 x [tex]10^{-5[/tex].

Step 3: Use the Henderson-Hasselbalch equation to calculate the pH.
pH = pKa + log ([A-]/[HA])
Here, [A-] is the concentration of the conjugate base (sodium propionate) and [HA] is the concentration of the acid (propionic acid).

pH = -log(Ka) + log([0.1833]/[0.1417])

Step 4: Calculate the pH.
pH ≈ -log(1.3 x [tex]10^{-5[/tex]) + log(0.1833/0.1417)
pH ≈ 4.886 + 0.259
pH ≈ 5.145

To know more about "pH" refer here:

https://brainly.com/question/30761746#

#SPJ11

For a process where ΔH⁰sys < 0 and ΔS⁰sys > 0, the sign on ΔG⁰sys < 0 when:b. ΔG⁰sys < 0 for all temperatures.

This is because ΔG⁰sys = ΔH⁰sys - TΔS⁰sys,  and with a negative ΔH⁰sys and positive ΔS⁰sys, the resulting ΔG⁰sys will always be negative, regardless of the temperature (T).For a process where ΔH⁰sys < 0 and ΔS⁰sys > 0, the sign on ΔG⁰sys < 0 when:b. ΔG⁰sys < 0 for all temperatures.

ΔG stands for gibbs free energy, ΔH stands for enthalpy and ΔS stands for entropy. Gibbs free energy is used to measure the maximum amount of work done in a thermodynamic system as per the temperature and pressure conditions. Enthalpy is defined as a measurement of amount of energy the thermodynamic system holds and entropy defines the degree of randomness of the thermodynamic system.

Learn more about ΔG⁰sys : https://brainly.com/question/9179942

#SPJ11

24.36 g/L is the density of carbon tetrahydride at 685 torr and 65 °c  .

We can use the ideal gas law :

PV = nRT

where:

P = pressure (685 torr)

V = volume

n = number of moles

R = gas constant (0.0821 L atm/mol K)

T = temperature (65 °C = 338.15 K)

To find the molar mass of carbon tetrahydride, we add up the atomic masses of each element:

C = 12.01 g/mol

H = 1.01 g/mol

4H atoms x 1.01 g/mol = 4.04 g/mol

Total molar mass = 12.01 + 4.04 = 16.05 g/mol

Now we can calculate n:

n = molar mass / mass of 1 mole = 16.05 g/mol / 1 mol = 16.05 g

Next, we can put  the values into the equation:

(685 torr) x (1 L) = (16.05 g) x (0.0821 L atm/mol K) x (338.15 K)

Solving for volume:

V = (16.05 g) x (0.0821 L atm/mol K) x (338.15 K) / (685 torr) = 0.659 L

Finally, we can calculate density:

density = mass / volume = 16.05 g / 0.659 L = 24.36 g/L

Therefore, the density of carbon tetrahydride at 685 torr and 65 °C is 24.36 g/L.

To know more about density refer here :

https://brainly.com/question/26364788

#SPJ11

Answer:

9 moles

Explanation:

To find out how many moles of compound B are needed to have the same mass as 6.0 mol of compound A, we need to use the molar mass of each compound and set up a proportion:

Moles of A / Molar mass of A = Moles of B / Molar mass of B

We know that the molar mass of compound A is 20 g/mol and that we have 6.0 mol of it, so:

6.0 mol A / 20 g/mol A = Moles of B / 30 g/mol B

Simplifying this equation:

0.3 mol A = Moles of B / 30

Multiplying both sides by 30:

9 mol B = 0.3 mol A

So, we need 9 moles of compound B to have the same mass as 6.0 mol of compound A.

In the electrophilic aromatic substitution through iodination, the role of NaI is to generate the electrophile I+ and the role of NaOCl is to oxidize the vanillin to form the electrophilic species. The role of sodium thiosulfate in the work-up is to remove any remaining iodine in the reaction mixture.

The electrophilic aromatic substitution through iodination involves the use of sodium iodide (NaI) and sodium hypochlorite (NaOCl) as the reactants.

NaI serves as a source of iodine and generates the electrophile I+ which is an important component of the reaction. NaOCl oxidizes vanillin to form the electrophilic species. The reaction takes place in the presence of an acid catalyst and an organic solvent such as ethanol.

After the reaction, sodium thiosulfate is used in the work-up of the reaction. Sodium thiosulfate acts as a reducing agent and reacts with any remaining iodine in the reaction mixture to form harmless sodium iodide and sodium tetrathionate.

This helps to remove any unreacted iodine and prevents it from interfering with subsequent reactions or causing harm to the environment.

Overall, the role of each reactant in the transformation is to contribute to the formation of the electrophilic species and aid in the electrophilic aromatic substitution.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

The balanced equation for the neutralization reaction between hydrochloric acid (HCl) and potassium hydroxide (KOH) is:

A neutralization reaction is a chemical reaction between an acid and a base that results in the formation of a salt and water.

In this type of reaction, the H+ ions from the acid react with the OH- ions from the base to form water, while the remaining ions from the acid and base combine to form a salt.

The general equation for a neutralization reaction is:

acid + base → salt + water

The reaction between HCl and KOH produces potassium chloride (KCl) and water (H2O).

Learn more about titration at

https://brainly.com/question/13307013

#SPJ1

The polar molecules among the given options are H2O (water) and C2H6O (ethanol). These molecules exhibit a net dipole moment due to the difference in electronegativity between their constituent atoms.

CCl4 (carbon tetrachloride) is a nonpolar molecule, as its symmetrical structure cancels out any net dipole moment.

Ethanol (abbr. EtOH; also called ethyl alcohol, grain alcohol, drinking alcohol, or simply alcohol) is an organic compound. It is an alcohol with the chemical formula C2H6O.

Its formula can also be written as CH3−CH2−OH or C2H5OH (an ethyl group linked to a hydroxyl group).

To know more polar molecules click this link-

brainly.com/question/31023968

#SPJ11

The pH when 1.00 mL of 1.00 M HCl is added to:

a) Pure water is approximately 3.00, and

b) A buffer with [HOAc] = 0.700 M and [OAc-] = 0.600 M (pH 4.68) is approximately 4.65.


a) When 1.00 mL of 1.00 M HCl is added to 1.00 L of pure water, the HCl dissociates completely, providing 0.001 moles of H+. Since the total volume is 1.001 L, the H+ concentration becomes (0.001 moles / 1.001 L) ≈ 0.001 M. The pH is calculated as -log(0.001) ≈ 3.00.

b) For the buffer, use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). The pKa is -log(K) = -log(1.8x10⁻⁴) ≈ 3.74.

Adding 0.001 moles of HCl to the buffer will react with the OAc- ions, reducing [OAc-] by 0.001 moles and increasing [HOAc] by 0.001 moles. The new concentrations are [HOAc] = 0.701 M and [OAc-] = 0.599 M. The new pH is 3.74 + log(0.599/0.701) ≈ 4.65.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

It can be inferred that the temperature required for the specimen of -iron to be carburized for 2 hours and achieve the same diffusion result as at 900°C for 15 hours would be around 950-1000°C.

Carburization is the process of introducing carbon into a solid iron material to create a surface layer that is harder than the core. The temperature at which carburization occurs is critical to achieving the desired diffusion result.

At approximately what temperature a specimen of -iron would have to be carburized for 2 hours to produce the same diffusion result as at 900°C for 15 hours depends on several factors, such as the carbon content of the carburizing medium, the depth of the carburized layer, and the initial carbon content of the iron material.

Generally, the higher the carburizing temperature, the shorter the carburizing time required to produce the same diffusion result. For example, if the temperature is increased to 950°C, the time required for carburization will reduce by about half.

Learn more about carburization at

https://brainly.com/question/15888725

#SPJ11

The pair that cannot be mixed together to form a buffer solution is option A) NaCl, HCl. A buffer solution consists of a weak acid and its conjugate base or a weak base and its conjugate acid, which help maintain a constant pH.

A buffer solution is a solution that contains a weak acid and its conjugate base or a weak base and its conjugate acid. Buffers help to maintain a relatively constant pH when small amounts of acids or bases are added to the solution. In the pair NaCl and HCl, both compounds are strong electrolytes and do not contain a weak acid or a weak base. NaCl is a strong electrolyte because it dissociates completely into Na+ and Cl- ions in solution. Similarly, HCl is a strong acid that dissociates completely into H+ and Cl- ions. Since neither NaCl nor HCl contains a weak acid or a weak base, they cannot form a buffer solution. In order to form a buffer solution, it is necessary to have a weak acid and its conjugate base or a weak base and its conjugate acid. Other examples of compounds that cannot form a buffer solution include strong acids such as HNO3 and H2SO4, and strong bases such as NaOH and KOH. These compounds are also strong electrolytes and do not contain a weak acid or a weak base. In summary, a buffer solution requires a weak acid or a weak base and its conjugate base or acid, and strong electrolytes such as NaCl and HCl cannot form a buffer solution.

To know more about buffer please refer: https://brainly.com/question/22821585

#SPJ11

The false statement is: Vitamin K is covalently attached to proteins, but rather serves as a cofactor for the enzymes involved in blood coagulation.

1. Vitamin K1
2. Vitamin K is covalently attached to proteins.
3. Vitamin K is a water-insoluble molecule.
4. Vitamin K is important for blood coagulation.
5. Vitamin K is structurally related to warfarin.

Hence, The false statement is Vitamin K is covalently attached to proteins.

To know more about Vitamin K, visit:

https://brainly.com/question/12998225

#SPJ11

Butanoic acid (CH3CH2COOH)

Isobutanol (CH3CH(CH3)CH2OH)

These two compounds can react in the presence of catalytic acid to form methyl 3,3-dimethylbutanoate

In a Fischer esterification process, an alcohol and a carboxylic acid react to form an ester in the presence of a catalytic acid, typically sulfuric acid.

In this case, we want to form the ester methyl 3,3-dimethylbutanoate, which has the molecular formula CH3CH2CO2C(CH3)3.

To form this ester, we need to start with a carboxylic acid and an alcohol that can react to form the ester. One possible combination of reactants that would give us the desired product is:

Butanoic acid (CH3CH2COOH)

Isobutanol (CH3CH(CH3)CH2OH)

These two compounds can react in the presence of catalytic acid to form methyl 3,3-dimethylbutanoate:

CH3CH2COOH + CH3CH(CH3)CH2OH → CH3CH2CO2C(CH3)3 + H2O

Note that the acid catalyst (e.g. sulfuric acid) is not consumed in the reaction and serves only to facilitate the reaction.

To know more about Fischer esterification process here:

https://brainly.com/question/31041190#

#SPJ11

a. The E⁰ for the spontaneous redox reaction that occurs when the two half-reactions are coupled is 0.093 V.

b. The value of ΔG⁰ for the reaction is -54.1 kJ/mol.

c. The equilibrium constant for the reaction is 2.97 × 10²³.

a. To calculate E⁰ for the spontaneous redox reaction, you need to first identify the reduction and oxidation half-reactions. The half-reaction with the higher standard reduction potential (E⁰) will undergo reduction, and the other will undergo oxidation. In this case, N₂O has the higher E⁰ value (1.766 V), so it will be reduced. The MnO₄⁻ half-reaction will be oxidized, and its E⁰ value needs to be reversed (to -1.673 V). Now, add the two E⁰ values to find the overall E for the redox reaction:

E⁰ = E⁰(reduction) + E⁰(oxidation) = 1.766 V + (-1.673 V) = 0.093 V

b. To calculate the Gibbs free energy change (ΔG) for the reaction, use the following formula:

ΔG⁰ = -nFE

n is the number of electrons transferred (here, it's 2 for the N₂O half-reaction and 3 for the MnO₄⁻ half-reaction; find the least common multiple to balance the electrons: 6). F is Faraday's constant (96,485 C/mol). E is the cell potential we calculated in part a (0.093 V).

ΔG = -(6 mol e⁻)(96,485 C/mol e⁻)(0.093 V) = -54,052 J/mol = -54.1 kJ/mol

c. To determine the equilibrium constant (K) for the reaction, use the relationship between ΔG, K, and the gas constant (R = 8.314 J/mol·K) and the temperature (T, usually 298 K for standard conditions):

ΔG = -RTln(K)

Rearrange to solve for K:

K = e^(-ΔG/RT) = e^(54,052 J/mol / (8.314 J/mol·K)(298 K)) ≈ 2.97 × 10²³

Learn more about redox reaction here: https://brainly.com/question/459488

#SPJ11

PF3 is the molecule that has dipole-dipole interactions in the liquid phase

Dipole-dipole "interactions" occur between polar molecules with dipoles, where the positive pole of one molecule is attracted to the negative pole of another molecule. In a "liquid" phase, molecules have enough energy to overcome some of their intermolecular forces, but not all.

1. PF3:

This molecule is polar because the fluorine atoms are more electronegative than the phosphorus atom, creating a net dipole moment.
2. XeF2:

This molecule is nonpolar due to its linear geometry, which causes the dipole moments of the two fluorine atoms to cancel each other out.
3. GeF:

This is an incomplete molecular formula, so it cannot be evaluated.
4. OPClS:

This is also an incomplete molecular formula, so it cannot be evaluated.
5. OBF:

This is another incomplete molecular formula, so it cannot be evaluated.

For more information on dipole dipole interactions  in Liquid phase refer https://brainly.com/question/11828970

#SPJ11

Option A. When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase.

When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase. This is because cooler temperatures generally increase the solubility of gases in liquids, allowing more carbon dioxide to dissolve into the beverage.

When you put your Soda can or bottle of Soda into the fridge, it will go flat faster than if you had left it out on the counter. This is because cold temperatures cause carbonation to escape more quickly from a beverage. This can happen when there are small holes in the bottom of an aluminum container.

Know more about  solubility - brainly.com/question/9098308

#SPJ11

The active site of beta-galactosidase contains key amino acids that play a crucial role in its catalytic activity. These amino acids include Glu-461, Tyr-503, and Glu-537. They work together to facilitate the hydrolysis of lactose into glucose and galactose.

The active site of beta galactosidase contains several important amino acids, including glutamic acid, histidine, and aspartic acid. These amino acids play key roles in catalyzing the hydrolysis of lactose, which is the primary function of beta galactosidase. Other amino acids present in the active site may also contribute to the enzyme's overall function and specificity, such as arginine, lysine, and tryptophan. The exact arrangement and function of these amino acids may vary depending on the specific species of beta galactosidase and the surrounding environment.

Learn More about beta-galactosidase here :-

https://brainly.com/question/15451918

#SPJ11

Answer: On increasing energy, frequency of the wave increases, whereas the wavelength decreases.

Explanation: According to Wave theory and Plank-Einstein relation, Energy of a wave is directly proportional to its frequency, with constant factor as plank`s constant (h=6.62607015 × 10-34 m2 kg / s). That is, (Energy)=(h)x(frequency).

And as the frequency changes, wavelength also changes as they are inversely proportional. We can also observe these changes by looking at the electromagnetic spectrum (attached in the answer).

Read more about frequency and wavelength relation at:

https://brainly.in/question/16472596

a) pH = 0.98, b) pH = 1.65, c) pH = 7.00, d) pH = 12.34.

To determine the pH at each point, calculate moles of HBr and RbOH, determine the resulting concentrations, and use the pH or pOH formula to calculate pH.


a) Before any RbOH has been added, pH = -log10[H+] = -log10(0.128) ≈ 0.98.

b) After 0.0180 L RbOH has been added: moles HBr = 0.0720 L * 0.128 M, moles RbOH = 0.0180 L * 0.256 M. HBr remains after neutralization reaction. Calculate the new concentration of HBr and find the pH.

c) After 0.0360 L RbOH has been added: moles RbOH = 0.0360 L * 0.256 M. Now HBr and RbOH have reacted in a 1:1 ratio, meaning the solution is neutral, and the pH = 7.00.

d) After 0.0540 L RbOH has been added: moles RbOH = 0.0540 L * 0.256 M. Excess RbOH is present. Calculate the concentration of OH- ions and find the pOH. Then, use pH = 14 - pOH to find the pH.

To know more about  neutralization reaction click on below link:

https://brainly.com/question/28970253#

#SPJ11

If the actual temperature of the solution is lower than that of the water bath, the value of the activation energy would likely be higher.

This is because the activation energy is the minimum amount of energy required for a reaction to occur. If the temperature is lower, there is less energy available for the reactants to reach this minimum energy threshold. Therefore, the reaction would proceed at a slower rate and require more energy to reach completion. In contrast, if the actual temperature of the solution was higher than that of the water bath, the value of the activation energy would decrease, as there would be more energy available to the reactants.

Learn more about temperature here:

https://brainly.com/question/13134636

#SPJ11

The solution is acidic and contains 2.6 x 10-11 M of OH-. The right option is A), acidic, 2.6 x 10-11 M.

To calculate the concentration of OH- in a solution that contains 3.9 x 10^-4 M H3O+ at 25°C, we will use the ion product constant of water (Kw) equation:

Kw = [H3O+] [OH-]

At 25°C, Kw = 1.0 x 10^-14.

We are given [H3O+] = 3.9 x 10^-4 M. We will now solve for [OH-]

1.0 x 10^-14 = (3.9 x 10^-4) [OH-]

To find [OH-], divide both sides by 3.9 x 10^-4

[OH-] = (1.0 x 10^-14) / (3.9 x 10^-4) = 2.564 x 10^-11 M

Now, we will identify the solution as acidic, basic, or neutral

Since [H3O+] > [OH-], the solution is acidic.

Thus, the concentration of OH- is 2.6 x 10^-11 M, and the solution is acidic. The correct answer is A) 2.6 x 10^-11 M, acidic.

Learn more about acidic solutions: https://brainly.com/question/24255408

#SPJ11

Compounds with hydroxyl groups are more likely to act as an acid if they have covalent bonds between the O and the central atom. This is because the O is able to donate its lone pair of electrons to form a bond with the central atom, and the presence of the hydroxyl group makes the molecule more likely to release a hydrogen ion (H+) in the solution, making it acidic.

Compounds with hydroxyl groups are more likely to act as an acid if bonds to the central atom are covalent. In these compounds, the presence of hydroxyl groups (-OH) can cause the molecule to act as an acid by donating a hydrogen ion (H+) to a solution. The covalent bond between the central atom and the oxygen atom in the hydroxyl group enables this acidic behavior.

Learn more about hydroxyl groups at https://brainly.com/question/24807422

#SPJ11

To evaluate the determinant of the n × n matrix a = 15 10 25 −5 using the fact that |ca| = cn|a|, we need to first factor out the greatest common divisor (gcd) of the matrix. The determinant of the n × n matrix a = 15 10 25 −5 is 75.

First, let's find the greatest common divisor (GCD) of the given elements in matrix A:

Matrix A:
| 15  10  25  -5 |

The GCD of 15, 10, 25, and -5 is 5. Now, let's factor out the GCD from the matrix A:

Matrix B (after factoring out 5):
| 3  2  5  -1 |

Now, you can calculate the determinant of the n × n matrix B using any method you prefer (such as row reduction, cofactor expansion, etc.). Let's assume the determinant of matrix B is det(B).

Since we factored out a 5 from matrix A to get matrix B, we can use the property |ca| = cn|a| to find the determinant of matrix A. In this case, c = 5 and n = 4 (since it's a 4 × 4 matrix).

So, det(A) = 5^4 * det(B).

After calculating the determinant of matrix B, multiply it by 5^4 to find the determinant of matrix A.

Learn more about matrix here: brainly.com/question/29132693

#SPJ11

The reaction yields propene and sodium bromide as the final products. The mineral oil is used to maintain a constant temperature and to prevent the reaction mixture from boiling.

What is the mechanism of the double elimination reaction?

The mechanism of the 1,2-dibromopropane double elimination process with two equivalents of sodium amide.

The reaction mechanism begins with the deprotonation of one of the beta-carbons of 1,2-dibromopropane by sodium amide. This forms a carbanion intermediate that is stabilized by the electron-withdrawing effect of the two bromine atoms.

Next, a second equivalent of sodium amide deprotonates the other beta-carbon, forming another carbanion intermediate. The two carbanions then undergo an E2 elimination reaction, in which the bromine atoms are eliminated as bromide ions and a carbon-carbon double bond is formed.

To learn more about E2 elimination reaction, visit: https://brainly.com/question/28239179

#SPJ1

The Lewis dot structure of FClO3 where there is an F-Cl bond is:

           F

           |

       Cl--O--O

           |

           O

Chlorine has a formal charge of C) +3 in FClO3.

The Lewis dot structure shows the arrangement of atoms and valence electrons in a molecule.

To draw the Lewis dot structure of FClO3, we need to first determine the total number of valence electrons in the molecule. Fluorine (F) has 7 valence electrons, chlorine (Cl) has 7, and oxygen (O) has 6. We also need to add 1 for the negative charge on the ion, giving a total of 32 valence electrons.

Next, we arrange the atoms in the molecule, with the central atom being the least electronegative. In this case, chlorine is the central atom, and it is bonded to one fluorine atom and three oxygen atoms. The F-Cl bond is a single bond, represented by a line between the F and Cl atoms.

We then place the remaining valence electrons around each atom, in pairs, until each atom has a full octet of electrons (except for hydrogen, which has only two electrons). The remaining valence electrons are placed on the central atom.

After drawing the Lewis dot structure, we can calculate the formal charge on each atom to ensure that it is as close to zero as possible.

The formal charge of an atom is the difference between the number of valence electrons on the free atom and the number of electrons assigned to the atom in the Lewis structure. In this case, chlorine has 6 valence electrons (7 minus 1 because of the bond with fluorine), and 3 lone pairs (6 electrons) for a total of 9 electrons.

Thus, its formal charge is +7 - 9 = -2. However, oxygen atoms have a higher electronegativity than chlorine, so we redistribute the electrons from the oxygen atoms to chlorine. Chlorine now has 5 lone pairs (10 electrons) and a formal charge of +3 (7 - 10). All the other atoms have a formal charge of zero.Chlorine has a formal charge of C) +3 in FClO3.

For more questions like Electron click the link below:

https://brainly.com/question/1255220

#SPJ11

The molar solubility of Cd(OH)2 is 1.1 * 10^-5 M if the value of Ksp for Cd(OH)2 is 2.5 * 10^-14. and the initial concentration of NaBr need to be in order to increase the molar solubility of Cd(OH)2 to1.0 * 10^-3 moles per liter is 17.8 M.

1. To find the molar solubility of Cd(OH)2, we need to use the Ksp expression:

Ksp = [Cd2+][OH-]^2

Since Cd(OH)2 dissociates into one Cd2+ ion and two OH- ions, we can substitute [OH-]^2 with (2s)^2 = 4s^2, where s is the molar solubility of Cd(OH)2. Thus:

Ksp = [Cd2+][OH-]^2 = (s)(4s^2)^2 = 16s^5

We know that Ksp = 2.5 * 10^-14, so we can solve for s:

2.5 * 10^-14 = 16s^5
s = 1.1 * 10^-5 M

Therefore, the molar solubility of Cd(OH)2 is 1.1 * 10^-5 M.

2. The solubility of Cd(OH)2 can be increased through the formation of the complex ion (CdBr4)2- (Kf = 5 * 10^3). When solid Cd(OH)2 is added to a NaBr solution, some of the Cd2+ ions will react with Br- ions to form the complex ion. The equilibrium reaction is:

Cd2+ + 4Br- ⇌ (CdBr4)2-

The equilibrium constant for this reaction is Kf = 5 * 10^3. We can use this information to calculate the initial concentration of NaBr needed to increase the molar solubility of Cd(OH)2 to 1.0 * 10^-3 M.

First, we need to write the expression for the formation constant of the complex ion:

Kf = [CdBr4]2- / [Cd2+][Br-]^4

At equilibrium, we can assume that the concentration of Cd2+ is equal to the molar solubility of Cd(OH)2, which is 1.0 * 10^-3 M. We also know that the concentration of Br- ions is equal to the initial concentration of NaBr, which we'll call x. Thus:

Kf = [(CdBr4)2-] / (1.0 * 10^-3 M)(x)^4

We can rearrange this equation to solve for x:

x = (Kf / (1.0 * 10^-3 M))^(1/4)

x = (5 * 10^3 / (1.0 * 10^-3 M))^(1/4)

x = 17.8 M

Therefore, the initial concentration of NaBr needed to increase the molar solubility of Cd(OH)2 to 1.0 * 10^-3 M is 17.8 M. However, this concentration is very high and may not be practical or safe to use. It's also important to note that adding too much NaBr can lead to the precipitation of CdBr2, which would decrease the solubility of Cd(OH)2.

Know more about Molar Solubility here:

https://brainly.com/question/15087323

#SPJ11

Hypothesis:I hypothesize that by increasing the size of the star, the gravitational pull on the planets in Solar System X will increase, resulting in a more stable system.

Gravitational force is a fundamental interaction of nature that attracts two objects with mass. It is the force that binds us to the planet, keeps the planets in orbit around the sun, and causes objects to fall to the ground when dropped. The force of gravity is inversely proportional to the square of the distance between the two objects; thus, objects that are closer together experience a greater gravitational force than those that are further apart.

Results:

When I increased the size of the star, the planets in Solar System X were indeed pulled in closer to the star and the system became more stable. I observed that the planets were orbiting closer to the star and had a smaller semi-major axis, which indicates that the gravitational pull was stronger. Additionally, the eccentricity of the orbits decreased, showing that the orbits were more circular. This demonstrates that increasing the size of the star increases the gravitational pull in Solar System X, resulting in a more stable system.

To learn more about gravitational

https://brainly.com/question/28623512

#SPJ1

d. II < IV < III < I. Now, we can rank them in order of increasing oxidation level:
II (ethane) < III (acetaldehyde) < I (acetic acid) < IV (ethylene)

- CH3CH3 is a compound with only C-C and C-H single bonds, so it has the lowest oxidation level.
- CH2=CH2 is an unsaturated compound with a C=C double bond, so it has a higher oxidation level than CH3CH3.
- CH3CHO is an aldehyde with a carbonyl group (C=O), which has a higher oxidation level than CH2=CH2.
- CH3COOH is a carboxylic acid with a carboxyl group (-COOH), which has the highest oxidation level among the given compounds.
Therefore, the correct order from lowest to highest oxidation level is II < IV < III < I.
To rank the compounds in order of increasing oxidation level, we need to analyze the oxidation state of carbon in each compound:
I. CH3COOH (acetic acid): In this compound, the carbonyl carbon has an oxidation state of +3, while the methyl carbon has an oxidation state of -3. The average oxidation state of carbon is 0.
II. CH3CH3 (ethane): In this compound, both carbons have an oxidation state of -3.
III. CH3CHO (acetaldehyde): The carbonyl carbon has an oxidation state of +1, while the methyl carbon has an oxidation state of -3. The average oxidation state of carbon is -1.
IV. CH2=CH2 (ethylene): Each carbon in this compound has an oxidation state of 0.
Now, we can rank them in order of increasing oxidation level:
II (ethane) < III (acetaldehyde) < I (acetic acid) < IV (ethylene)
So, the correct answer is d. II < IV < III < I.

learn more about oxidation here

https://brainly.com/question/9496279

SPJ11

The value of Q is 1 x 10⁻⁷ which is less than the given Ksp and therefore precipitate will not form.

The solubility product constant (Ksp) for CaHPO₄ is 7 x 10⁻⁷. To determine whether CaHPO₄ will precipitate from a solution with [Ca²⁺] = 0.0001 M and [HPO₄²⁻ ] = 0.001 M, we need to calculate the ion product (Q) of the solution.

The balanced chemical equation for the dissolution of CaHPO₄ is:

CaHPO₄(s) ⇌ Ca²⁺(aq) + HPO₄ ²⁻(aq)

The ion product (Q) for the solution can be calculated as follows:

Q = [Ca²⁺][HPO₄²⁻] = (0.0001 M)(0.001 M) = 1 x 10⁻⁷

The value of Q is 1 x 10⁻⁷, which is slightly smaller than the Ksp (7 x 10⁻⁷). Therefore, a precipitate of CaHPO₄ is not expected to form under these conditions, since the ion product is less than the solubility product.

Learn more about Ksp here:

https://brainly.com/question/9640206

#SPJ11