Calculate the maximum amount of picric acid (in grams) that can be obtained if 0.552mL of phenol (density

Answer:

Explanation:

The equation for calculating the amount of heat released is:

q = mcΔT

where:

q = heat released (in joules)

m = mass of the substance (in grams)

c = specific heat capacity (in J/g·°C)

ΔT = change in temperature (in degrees Celsius)

Given:

m = 30 g

ΔT = 96°C - 25°C = 71°C

c = 4.184 J/g·°C (for water)

so

q = (30 g)(4.184 J/g·°C)(71°C) = 8.91*71 = 635.11 J

Therefore, 635.11 J of heat is released when 30g of water cools down from 96 degree celsius to 25 degree celsius

Note that this calculation is valid only if the process is adiabatic or no heat is exchanged with the environment.

2 moles of Al₂O₃ will be produced when 4 moles of Al reacts in accordance with the above equation.

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, 6.0 moles of Al reacts with 4.0 mol of oxygen gas to form Al₂O₃ as follows:

4Al + 30₂ → 2Al₂O₃

Based on the above equation, 4 moles of Al reacts to form 2 moles of aluminium oxide.

This means that 4 moles of aluminium will produce 4 × ²/4 = 2 moles of aluminium oxide.

Therefore, 2 moles of Al₂O₃ will be produced by 4 moles of aluminium.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer

a. Single displacement

b. Decomposition

When classifying chemical reactions, consider how reactants change to form the products.

An equation for a chemical reaction has a left side and a right side. The arrow separates the left and right sides.

Each product or reactant can be one or more elements.

We can use letters* to represent products and reactants in a reaction.

Two reactants become one product.

One reactant becomes two products.

Start with two reactants, a compound and an element. To form the products, the element replaces one of the elements that was in the compound.

Start with two reactants that are compounds. To form the products, an element from each compound replaces each other.

Therefore, equation (a) is a single displacement reaction and equation (b) is a decomposition reaction.

*Each letter represents an element. Two elements make a compound. A letter can also represent a compound if compound stays together during the reaction.

Learn more about displacement reactions here:

https://brainly.com/question/13219117

Carbon 1: δ = 2.09 ppm (The C1 atom is a methyl group, and is in a tertiary environment, which typically corresponds to a chemical shift of around 2.09 ppm).

Chemical shift is a term used in NMR spectroscopy to describe the relative difference in the resonance frequency of a nucleus in a molecule compared to a reference frequency.

2. Carbon 2: δ = 11.81 ppm (This is the carbonyl carbon, and is in a sp2 hybridized environment, which typically corresponds to a chemical shift of around 11.81 ppm).
3. Carbon 3: δ = 13.92 ppm (This is the terminal carbon of the pentene chain, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 13.92 ppm).
4. Carbon 4: δ = 16.53 ppm (The C4 atom is a methylene group, and is in a secondary environment, which typically corresponds to a chemical shift of around 16.53 ppm).
5. Carbon 5: δ = 17.86 ppm (The C5 atom is a quaternary carbon, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 17.86 ppm).

To learn more about chemical shift
https://brainly.com/question/8171972
#SPJ4

The halogens gets less reactive as we move down the group because the atomic mass will increases and the number of the electrons are increases.

The halogens get less reactive as we move top to bottom in the group in the periodic table as the atomic mass of the group 17 elements that is halogens will increases and as we move from  from top to bottom in the periodic table the electrons are added and the number of electrons are increases.

This is reason , that the reactivity of the group 17 elements that is halogens will decreases as we move from top to bottom.

To learn more about halogens here

https://brainly.com/question/15370711

#SPJ4

Answer:

Below

Explanation:

You didn't list any choices but stuff life color, density, texture,hardness, luster are PHYSICAL properties

Nitric acid has the formula HNO₃. If there are 3. 55x10²³ atoms of O in the sample, the number of moles of nitric acid is 0.589moles.

How many moles of a substance are present in a reaction is determined by comparing its mass to the mass of one mole. One mole, or Avogadro's number, is equal to the sample mass divided by the molar mass, or 6.023×10²³ moles. You can calculate the total number of atoms or molecules in a sample by dividing the number of moles by the Avogadro constant. The equation is: Number of Molecules=Atoms or Molecules /6.022×10²³.

1 mole oxygen atom contains 6.02×10²³ atoms

how many moles of oxygen contains 3.55x 10²³atoms

Moles of nitric acid = 3.55x 10²³atoms/6.02 ×10²³atoms

Moles of nitric acid = 0.589moles.

To know more about moles visit:

https://brainly.com/question/15894854

#SPJ4

At 55 °C, the equilibrium constant for this reaction is 6.68. A pharmaceutical chemist prepares 15.0 L of an initial 0.275 M acetic acid and 3.85 M ethanol solution.

Create an equation that can be solved for x by plugging the equilibrium concentrations (expressed in terms of x) into the formula for the equilibrium constant. (d) The equation from subpart (c) is cubic (it bears the formula ax3 + bx2 + cx + d = 0). In general, it is impossible to solve cubic equations in closed form. Indicate the direction (toward product or toward reactants) in which the mixture must change if it is not at equilibrium. The concentrations of SO 2 Cl 2 and SO 2 are 0.108 M and 0.052 M, respectively, in a mixture of the three gases that has reached equilibrium.

To learn more about equilibrium constant please click on below link

https://brainly.com/question/10038290

#SPJ4

Answer:

2H2 +O2 - 2H20

4g of H react to give 36g of H20

20g of H gives Xg of H20

cross multiply

4x= 36*20

4x= 720

Xg = 720/4

Xg= 180g approximately

That is A which is 179

D. a) propanoyl chloride with (1) AlCl3 and (2) H2O b) Br2 / heat or light.

What is a reagent?

A reagent is a substance that is used in a chemical reaction to detect, measure, examine, or produce other substances. Reagents are used in many different industries, including pharmaceuticals, environmental testing, and materials science. Reagents can be in the form of a solid, liquid, or gas, and are generally made from a combination of elements, compounds, or mixtures.

a) The reaction of propanoyl chloride with AlCl3 and H2O can be represented as follows:

AlCl3 + H2O + Propanoyl Chloride → Al(OH)3 + HCl + Propanoic Acid

This reaction involves substitution of the chlorine atom in the propanoyl chloride molecule with a hydroxide ion from the AlCl3/H2O mixture.

b) Br2 / heat or light cannot be used to react with propanoyl chloride, as this reaction would require the breaking of the carbon-chlorine bond. This is not possible using Br2 / heat or light.

To know more about reagent,

https://brainly.com/question/26905271

#SPJ4

The amount of heat involved per gram of potato chip burned is 8388J when a 75g of a potato chip are burned in a calorimeter that contains 2L of water initially at 297K.

Given mass of potato chips burned = 75g

Mass of water (m) = 2L = 2000g

Initial temperature (T1) = 297K - 273 = 24oC.

Final temperature after combustion (T2) = 12oC

We know that q = mC∆T where q is heat and C is specific heat of water =  4.2J/g/oC.

q = 2000 x 4.2 x (24-12)

q = 8388J

Hence the heat evolved per gram of potato chip burned is 8388J

To learn more about heat click here https://brainly.com/question/21041726

#SPJ4

The mass of 2.30 x 10²⁴ particles of water (H₂O) is 60.84 grams.

The amount of matter in a particle or object is represented by its mass, which is denoted by the symbol m. In the International System (SI), the kilograms serves as the default unit of mass (kg).

The formula N = n L describes the relationship between a substance's number of particles and number of moles.

n also defined using the equation n = m/M

N = n L

N = m/M L

Then substitute N and L values,

2.30×10²⁴ = m/M × 6.02×10²³

Molar mass of water = 18

2.30×10²⁴ = m/18  × 6.02×10²³

2.30×10²⁴/6.02×10²³ = m/18

3.38 = m/18

m = 3.38 × 18

m = 60.84grams.

To know more about mass visit:

https://brainly.com/question/11959999

#SPJ1

Answer:

correct answer is 0.165 moles by calculation

Answer:275.4 g Al2O3

Explanation: The mass of Al2O3 formed is 2.7 mol * 102 g/mol = 275.4 g. This is because the molar mass of Al2O3 is 102 g/mol. This means that when 1 mol of Al2O3 is formed, it has a mass of 102 g. Therefore, when 2.7 mol of Al2O3 is formed, it has a mass of 2.7 mol * 102 g/mol = 275.4 g.

To solve this we must be knowing each and every concept related to chemical Compound. Therefore, The other 2 points of the water  molecule are the paired two electrons from the oxygen atom and one electron from each H atom.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. The other 2 points of the water  molecule are the paired two electrons from the oxygen atom and one electron from each H atom.

Therefore, The other 2 points of the water  molecule are the paired two electrons from the oxygen atom and one electron from each H atom.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ1

An ideal gas is a gas composed of a large number of identical molecules that obey the ideal gas law.

What do you mean by Gas?

Gas is a state of matter made of atoms and molecules that are not bound together, allowing them to move freely and take the shape and volume of their container. It is one of the four fundamental states of matter (the others being solid, liquid, and plasma).

The heat exchanged in a two-step process is given by

q = CpΔT + (P1V1 – P2V2)

where Cp is the specific heat capacity of the gas, ΔT is the change in temperature, P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

For the two-step process,

q = CpΔT + (2.00 atm x 6.40 L – 2.50 atm x 3.20 L)

For the one-step process,

q = CpΔT + (2.50 atm x 6.40 L – 2.50 atm x 2.56 L)

The difference in q for the two-step process and the one-step process is

q2 – q1 = (2.50 atm x 3.20 L – 2.00 atm x 6.40 L)

q2 – q1 = (7.68 L atm – 12.80 L atm)

q2 – q1 = -5.12 L atm

Since 1 L atm = 101.3 J, the difference in q for the two-step process and the one-step process is

q2 – q1 = -5.12 L atm x 101.3 J/L atm

q2 – q1 = -517.4 J.

Hence, the difference is -517.4 J.

To know more about Gas,

https://brainly.com/question/27870704

#SPJ4

In addition to respiration, a process known as guttation involves the loss of liquid water from a plant's healthy leaf or stem, mostly through water stomata.

The physiological loss of water . water of water vapor, mostly from the stomata of leaves, but also by evaporation first from surfaces of leaf tissue, flowers, and stems, is known as transpiration.

Additionally, by providing evaporative cooling, vegetation transpiration makes a major contribution to the energy balance of the leaf. Additionally, transpiration speeds up the movement of nutrients and water from roots to the shoots. Transpiration occurs when water vapor leaves a plant through the stomata.

To know more about Transpiration visit:

https://brainly.com/question/13891305

#SPJ1

The molar mass of CCl4 is 153. 81 g/mol. '769.0 g' of CCl4 are needed to have 5.000 mol.

What is molar mass?

Molar mass is the mass of one mole of a substance. It is usually expressed in grams per mole (g/mol). The molar mass of a substance is calculated by taking the sum of the atomic weights of all of the atoms in the molecule multiplied by the Avogadro constant (6.022x10^23).

To find the number of grams of CCl4 needed to have 5.000 mol, use the formula:

Mass (grams) = Molar mass (g/mol) x Number of moles

Mass (grams) = 153.81 g/mol x 5.000 mol

Mass (grams) = 769.0 g.

'769.0 g' of CCl4 are needed to have 5.000 mol.

To know more about molar mass,

https://brainly.com/question/837939

#SPJ4

Iron has a BCC crystal structure, an atomic radius of 0. 124 nm, and an atomic weight of 55. 85 g/mol. its theoretical density is 7.9 g /cm³.

The molar mass of the iron = 55.85 g/mol

The atomic radius = 0.124 nm

the edge length is given as :

a = (4r) / √3

a = ( 4 × 0.124 × 10⁻⁷ cm ) / √3

a = 2.86 × 10⁻⁸ cm

The density is given below :

density = ( Z × M ) / Na × a³

density = ( 2 × 55.85 ) / (6.023 ×10²³) × ( 2.86 × 10⁻⁸ )

density = 7.9 g/cm³

Thus the theoretical density is 7.9 g/cm³.

To learn more about density here

https://brainly.com/question/14728915

#SPJ4

(A) Vol. of solvent is 119.8 ml, (B) Molarity (M) of sol. is 5.00 M, (C) V1 of copper nitrate solution is 187.5 ml, (D) The instruction given is false.  

(A). To calculate the volume (ml) of a 2.25 M potassium hydroxide solution that contains 15.0 g of solute, we can use the formula:

The unit of measurement for molarity (M) is moles of solute per liter of solvent.

Rearranging the formula to solve for liters of solvent:

Molecularity = moles of solute / liters of solvent (M)

We know that the molar mass of potassium hydroxide (KOH) is 56.1 g/mol. To find the moles of solute, we can divide the given mass (15.0 g) by the molar mass of KOH:

15.0 g / 56.1 g/mol = 0.2679 moles

Now we can plug this value into the formula above:

Liters of solvent = 0.2679 moles / 2.25 M

Liters of solvent = 0.1198 L or 119.8 ml (rounded to 3 significant figures)

(B). To calculate the molarity of a solution containing 1.25 moles of glucose in 250. ml of solvent, we can use the formula:

The unit of measurement for molarity (M) is moles of solute per liter of solvent.

Plugging in the given values:

Molarity (M) = 1.25 moles / 0.250 L

Molarity (M) = 5.00 M

(C). To calculate the volume of a 10.00 M copper(II) nitrate solution that must be added to water to prepare 750.0 ml of a 2.500 M solution, we can use the formula:

M1V1 = M2V2

Where M1 and V1 are the concentration and volume of the original solution, and M2 and V2 are the concentration and volume of the final solution.

We know that the final solution has a volume of 750.0 ml and a concentration of 2.500 M, so we can plug in these values for V2 and M2:

M1V1 = 2.500 M x 750.0 ml

Now we can solve for V1 (the original volume) by rearranging the formula:

V1 = M2V2 / M1

V1 = (2.500 M x 750.0 ml) / 10.00 M

V1 = 187.5 ml (rounded to 4 significant figures)

(D). The instructions "Take 100.0 mL of the 10.0 M solution and add 900.0 mL water" are not correct for diluting a 10.0 M solution to a 1.00 M solution.

To achieve this dilution, you would need to take a smaller volume of the 10.0 M solution and add a larger volume of water, because the final volume should be larger than the starting volume.

For example, you could take 10.0 mL of the 10.0 M solution and add 90.0 mL of water, which would give you a final volume of 100.0 mL and a concentration of 1.00 M. The instruction given above is false.

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4

Answer: 2.85 x 10^22

Explanation:

We can use stoichiometry to convert grams to atoms.

*Important quantities*

Original amount of Copper: 3 grams

Molar mass of Copper: 63.5 grams

Avogadro's number: 6.022x10^23 atoms/formula units/molecules

Process - [tex]\frac{3gramCu}{1}[/tex]×[tex]\frac{1 mole Cu}{63.5 gCu}[/tex]×[tex]\frac{6.022x10x^{23} }{1 moleCu}[/tex] = 2.84503937×10^22

After taking sig figs into account, the answer needs to be rounded to 3 decimal places

Final answer: 2.85 x 10^22

Answer:

m=175

Explanation:

100/16 = 6.25

6.25x28 = 175

Answer: To solve this equation for m, you can divide both sides of the equation by 0.16. This will give you:

m = 28 / 0.16

Simplifying the right side of the equation gives:

m = 175

Therefore, m = 175.

Explanation:

In reality, spontaneous reactions occur relatively slowly because The reaction's activation energy is high.

Hence, Option 1 is correct.

Find more information about Activation energy here:

brainly.com/question/1380484

#SPJ4

Energy released in the reaction in which a proton fuses with a neutron to form a deuterium nucleus is calculated as 2.234 MeV.

In fusion reaction, two light nuclei merge to form single heavier nucleus. The process releases energy because total mass of the resulting single nucleus is less than the mass of two original nuclei. And the leftover mass becomes energy.

form a deuterium nucleus: 1^1H+0^1n⟶1^2H+γ The masses are 1^1H(1.0078u) 0^1n(1.0087u) and 1^2H(2.0141u) the γ -ray photon is massless.

Δm= 1.0078 +1.0087- 2.0141

Energy released = 2.4*10^-3 * 931 MeV

= 2.234 MeV

To know more about fusion reaction, refer

https://brainly.com/question/1983482

#SPJ4

The molarity of NaCl in enough water is 0.582[tex]\frac{mol}{mL}[/tex]

The moles of NaCl is given which is 0.23 and NaCl is dissolved in enough water which makes the solution of 395.6 mL.

The total number of moles of solute present in a given solution per litre is known as its molarity. In contrast to mass, which varies as the system's physical circumstances vary, the volume of a solution changes as a function of changes in the system's physical qualities, such as pressure and temperature. This has an impact on the molality of the solution. The symbol M, sometimes known as a molar, denotes molarity. A solution is considered to be one molar when one gram of the solute dissolves in one litre of the solution.

So, the molarity= [tex]\frac{totalnumber of moles}{total volume }[/tex]

molarity=[tex]\frac{0.23}{0.395}[/tex]

molarity=0.582[tex]\frac{mol}{mL}[/tex]

Hence, the molarity is 0.582.

Learn more about molarity

brainly.com/question/2817451

#SPJ4

There are 50% chances of the offspring being heterozygous for tall plant.

Crossing homozygous short tt plants with heterozygous tall Tt plants yields short to tall plants in a 1:1 ratio. So the seed has a 50% chance of growing into a large plant.

Under such conditions, the dominant allele is always expressed and the recessive allele is masked. In this example, the size allele is dominant, so the plant grows.

About 80% of an individual's height is determined by differences in their inherited DNA sequences.

Learn more about heterozygous visit:

brainly.com/question/29710301

#SPJ4