calculate the mass defect in fe-56 if the mass of an fe-56 nucleus is 55.921 amu. the mass of a proton is 1.00728 amu and the mass of a neutron is 1.008665 amu.

To find the original volume of vinegar, we can use the following formula:

Original volume of vinegar = Diluted volume * Dilution factor

In this case, the diluted volume is 100 ml and the dilution factor is 10, so the original volume of vinegar is:

Original volume of vinegar = 100 ml * 10 = 1000 ml

To find the concentration of acetic acid in the diluted solution, we can use the following formula:

Diluted concentration of acetic acid = Original concentration of acetic acid / Dilution factor

In this case, the original concentration of acetic acid is 0.87 mol/L and the dilution factor is 10, so the diluted concentration of acetic acid is:

Diluted concentration of acetic acid = 0.87 mol/L / 10 = 0.087 mol/L

This means that the diluted solution has a concentration of 0.087 mol/L acetic acid.

Please give me brainliest for more high quality answers! - longstretch

Answer:

B and D

Explanation:

Answer D, look like you're missing (g) which stands for gas

so answer B (which is aq) and answer D (which is g) are correct.

Grams and litters are not used in the chemical equations but used in calculation of the quantities of reactants and products.

A) Molar mass of AgBr,

MM = 1*MM(Ag) + 1*MM(Br)

= 1*107.9 + 1*79.9

= 187.8 g/mol

mass of AgBr = 0.45 g

mol of AgBr = (mass)/(molar mass)

= 0.45/1.878*10^2

= 2.396*10^-3 mol

B) According to balanced equation,

mol of Na2S2O3 formed = (2/1)* moles of AgBr

= (2/1)*2.396*10^-3

= 4.792*10^-3 mol

Answer: 4.79*10^-3 mol

B) Using: number of mol = M(Na2S2O3)*V(Na2S2O3)

4.792*10^-3 mol = 0.02 M * V

V = 0.240 L

V = 240 mL

To know more about Mole concept, visit:

https://brainly.com/question/16488605

#SPJ1

Answer:

Explanation:

it's 109.13 g Ag2S2O3 . i have it when i was in school :)

350 cubic centimetres of dilute hydrochloric acid will be equivalent to 0.35 [tex]dm^3[/tex].

The problem here has to do with converting the volume of a liquid from cubic centimetres to [tex]dm^3[/tex].

Recall that:

1 centimetre = 0.1 dm

Thus:

1 cubic centimetre = 0.001 cubic decimetre or [tex]dm^3[/tex]

In this case, we are to convert 350 cubic centimetres to cubic decimetres.

If, 1 cubic centimetre = 0.001 cubic decimetre, then

350 cubic centimetres = 350 x 0.001

                                     = 0.35 [tex]dm^3[/tex]

In other words, 350 cubic centimetres of dilute hydrochloric acid would be equivalent to 0.35 [tex]dm^3[/tex] of the dilute acid.

More on volume conversion can be found here: https://brainly.com/question/13259295

#SPJ1

The compound is called cis-3-bromocyclohexanecarboxylic acid. Out of the available possibilities, this is the best decision.

The most significant functional group in C=O is the carboxylic acids. Some carboxylic acids, such citric acid, lactic acid, or fumaric acid, are produced through fermentation; the majority of these types of carboxylic acids are used in the food sector. This class of organic molecules can be obtained through several methods.

Carboxylic acids play a significant role in organic chemistry and are used to create a variety of derivatives, including esters, acid anhydrides, acid chlorides, amides, etc. They are organic substances with one or more carboxyl groups in the molecules of their molecules.

To learn more about carboxylic acid visit:

brainly.com/question/4721247

#SPJ4

Check the nails every day for the development of rust. Both the nails submerged in water should rust after three weeks, while the nail submerged in vinegar should rust after about one week.

Rust is a similar coating created on a metal other than iron by corrosion. It is a reddish brittle coating that forms on iron especially when chemically attacked by damp air and is constituted primarily of hydrated ferric oxide.

Rust is a result of the reaction of iron with both air and water. Rust is a powder that forms from the oxygen in the air. Rusting is the process of rust creation. Rust is a reddish-orange flaky material. The metal surface is where rusting is more prone to happen because it is an oxidation process.

To know more about Rust please click here ; https://brainly.com/question/1477535

#SPJ1

According to the reactivity series, Lithium is more reactive than Zinc therefore, Li + ZnCO₃ reaction will most likely take place. Therefore, option (C) is correct.

The reactivity series or the activity series can be defined as the arrangement of metals or elements in the descending order of their reactivities.

The metals at the top of the reactivity series are powerful reducing agents and can be readily oxidized and easily corrode. The reducing ability of metals becomes weaker while moving down the reactivity series.

Lithium is more reactive than Zn so it can displace Zinc from zinc carbonate therefore, Li + ZnCO₃ reaction will most likely take place. Pt is less reactive than Fe so it can not displace Fe from FeCl₃ therefore, Pt + FeCl₃ reaction will not take place.

Learn more about the reactivity series, here:

brainly.com/question/13960839

#SPJ1

Answer:

c

Explanation:

edge 2023

If you eat the whole package, you would be eating a total of 900 calories.

What is calorie?
Calories are a measure of energy. Two main meanings of "calorie" are frequently used due to historical factors. The amount of heat required to increase the temperature of one kilogramme of water by one degree Celsius was the original definition of the huge calorie, food calorie, as well as kilogramme calorie (or one kelvin). The amount of heat required to produce the same rise in one gramme of water was known as the small calorie or gramme calorie. As a result, 1000 small calories are equal to 1 large calorie. The term "calorie" and the symbol "cal" almost always refer to the large unit in food and nutrition science.

If you eat the whole package, you would be eating a total of 900 calories (3 servings x 300 calories per serving = 900 calories).

To learn more about calorie
https://brainly.com/question/1061571
#SPJ4

The answer should go like...

Cube #1 to Cube #3

Cube #2 to Cube #1

Cube #2 to Cube #4

Cube #4 to Cube #3.

If 3.8 g of Cu₃(PO₄)₂(s) was recovered from step 1, the approximate [Cu²⁺ ] in the original solution is 0.3 M

The approximate [Cu²⁺ ] in the original solution can be calculate as follows

first we should calculate the moles of Cu₃(PO₄)₂ by dividing the mass with its molar mass

Moles of Cu₃(PO₄)₂ = mass/ mass molar

Moles Cu₃(PO₄)₂ = 3.8 g /  381 g/mol = 0.1 moles

we know the balance reaction of this reaction is

3Cu²⁺ + 2Na₃PO₄ ⇒ Cu₃(PO₄)₂ + 6 Na⁺

with unitary method we can conclude 3 Cu²⁺ produce 1 Cu₃(PO₄)₂ so we can calculate the 3Cu²⁺

mol Cu²⁺ = 3/1 x mol Cu₃(PO₄)₂

mol Cu²⁺ = 3x 0.1 = 0.3 M

Your question is incomplete but most probably the full question attached below

To learn more about Molar Mass refer to:

brainly.com/question/21334167

#SPJ4

One mole or 239.2 g of PbO₂ or 239.2 g gives two moles or 606.5  of lead sulphate. Thus, 23.6 g of lead oxide will give 59.84 g of lead sulphate.

Lead oxide is an ionic compound formed by the ionic bonding between the transition metal lead and oxygen by losing two electrons from lead to oxygen. It reacts with sulphuric acid giving lead sulphate PbSO₄.

As per the given balanced reaction, one mole of lead oxide gives two moles of lead sulphate.

Molar mass of PbO₂ = 239.2 g/mol

Molar mass of  PbSO₄ = 303.27 g/mol

2 moles of  PbSO₄ = 2 × 303.27  = 606.54 g.

Thus, 239.2 g of lead oxide gives 606.54 g of PbSO₄. The mass of PbSO₄ produced from 23.6 g of lead oxide is:

= (23.6 × 606 .54 )/ 239.2 g

= 59.84 g.

Therefore, the mass of PbSO₄ produced from 23.6 g of PbO2 is 59.84 g.

To find more on lead oxide, refer here:

https://brainly.com/question/13264277

#SPJ1

The pH of a buffer in which  the concentration of HOCl is 6.50 x 10⁻⁴ M and that of  NaOClis 7.50 x 10⁻⁴ M( the ka of HOCl is 3.0 x 10⁻⁸) is 7.51.

We can find out the pH of the buffer solution by Henderson-Hasselbalch equation, derived by Lawrence Joseph Henderson and Karl Albert Hasselbalch. It is given as:

pH = pKa + log [A⁻] / [HA]

Here,

pH is the acidity of the solution

pKa is the negative logarithm of Ka (ionization constant of acid)

[A⁻]  is the concentration of salt/ conjugate base

and [HA] is the concentration of acid.

given,

concentration of NaOCl, [A⁻] = 7.50× 10⁻⁴ M

concentration of HOCl [HA] = 6.50 × 10⁻⁴ M

Ka of HOCl = 3.0 × 10⁻⁸

∵ pKa = -log(Ka)

pKa = -log(3.0 × 10⁻⁸)

pKa= 7.45

Putting these values in Henderson-Hasselbalch equation:

pH = 7.45 + log 7.50× 10⁻⁴ M/6.50 × 10⁻⁴ M

pH = 7.45 + log 7.50/6.50

pH = 7.45 + log 1.15

pH = 7.45 + 0.06

pH = 7.51

Thus,  the pH of the buffer is 7.51.

To know more about pH of a buffer here

https://brainly.com/question/14748875

#SPJ4

In the following question the number of protons and electrons before it

a)lose electron are proton number= 13 electron =13

b) after losing electrons proton number=10 electron =10

c)the type of ion it becomes is a cation as it has a positive charge on it

What is atomic number?

The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.

In the first scenario before loses electrons the number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.In second scenario After it loses 3 electrons Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.

Therefore the number of protons is same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10 and it becomes a cation.

To know more about atomic number from the given link

https://brainly.com/question/11353462

#SPJ4

For 56 g/mol of the compound, change in the internal energy is calculated to be -539 kJ/mol.

Calorimeter is a device that is used to calculate the amount of heat involved in a chemical or physical process.

As, ΔU = Heat of calorimeter + Heat of solution

And we know, Heat = heat capacity * temperature

Given, 0.485 g compound

Then, ΔU  = 3.81  0.285 + 4.184  3000  0.285

so, ΔU = 4.67 kJ

For 56 g/mol,

ΔU =  (energy/ mass) * (moles/1)

ΔU = (4.67/0.485) *56

ΔU = 539 kJ/mol

As there is a rise in temperature in the reaction, therefore the negative sign is given to the internal energy, i.e. -539kJ/mol.

To know more about calorimeter, refer

https://brainly.com/question/2963957

#SPJ4

The Entropy(ΔS) (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.

What is Entropy (ΔS)?

The measure of a system's disorder is called entropy. It is a thermodynamic system's extensive attribute, which means that the amount of matter in the system affects how much it is worth. Entropy is typically represented in equations by the letter S and has units of joules per kelvin (J/K1) or (kg/m2/s2K1). Low entropy describes a highly ordered system.

What is the Second law of thermodynamics?

The entropy will either rise or stay the same in every cyclic process, according to the Second Law of Thermodynamics. Entropy, sometimes known as the "direction of time's arrow," provides information on how an isolated system evolves through time. If two separate pictures of the same system show one state that is more disordered than the other, it may be assumed that this state emerged later in time. In the case of an isolated system, the flow of events leads to a state where the system is more disordered or has the higher entropy.

Hence, ΔS (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.

To know more about Entropy, check out:

https://brainly.com/question/6364271

#SPJ4

The mass defect in fe-56 is 0.528.

Binding energy  -  quantity of energy required to split a particle from a machine of debris or to disperse all of the debris of the system. Binding power is particularly applicable to subatomic debris in atomic nuclei, to electrons bound to nuclei in atoms, and to atoms and ions certain collectively in crystals.

Binding energy is the minimal quantity of electricity required to free an item from a sure machine and escape from its place of have an impact on (i.e. break out to infinity). inside the given case, it's miles the energy required through the satellite to depart its orbit around the earth and break out to infinity.

Learn more about Binding energy here:-

brainly.com/question/23020604

#SPJ4

A poor conductor of electricity is pure water. The electric conductivity of regular distilled water is around 10 times when it is in equilibrium with atmospheric carbon dioxide.

On the other hand, it was discovered that different types of water had significantly varying conductivities, which indicate the overall amount of dissolved solids. And as predicted, pure water had the lowest conductivity while carbonated water had the greatest.

When the graphene content is less than 2.0%, it is discovered that electrical conductivity increases with increasing carbonation depth. In this instance, the cement matrix, which can be improved by carbonation product through filling pores, determines the electrical conductivity of the composite.

To know more about electric conductivity visit:-

https://brainly.com/question/5759256

#SPJ4

When pieces of two ionic compounds are exchanged, creating two new compounds, this reaction is known as a double replacement reaction (also known as a double displacement, exchange, or metathesis reaction).

What is Double Displacement Reaction?

When one reactant is partially replaced by another, the reaction is referred to as a twofold displacement reaction.

Double displacement reactions can be described as follows:

AD = CB + CD + AB

In a double replacement process, the ions in two reactant ionic compounds are exchanged for the same ions in two new product compounds.

When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.

Double displacement reactions and metathesis reactions are other names for double replacement processes.

Double replacement reactions include neutralisation, precipitation, and gas production.

Learn more about Double Displacement Reaction from given link

https://brainly.com/question/23918356

#SPJ4

Answer:

c

Explanation:

english please im just guessing

so the company hire company B because it pays not more than 85 cents.

Why would you not want to sell a cold pack made with compound x?

1. Technically it depends upon the temperature of your hand: if we assume the body temperature is 37 C then your hand is warmer than the beaker and the beaker will feel cold.

2. This is an endothermic reaction.

3.  If the beaker changes from 25 C to 5 C the energy is lower.

1.5g x (20/5) = 6.0 grams.

Cost of 6.0 g is

$184.04 x (6.0/1000) = about $1.10 each.

its cost = 110 cents

Compound B the same way.

1.0g x (20/2.5) = 8.0 grams.

Cost of 8.0 g is

$97.13 x (8.0/1000) = about $0.777 each.

its cost 77.7 cents.

so the company hire company B because it pays not more than 85 cents.

To know more about endothermic reaction, check out:

https://brainly.com/question/1447631

#SPJ4

The average atomic mass of silicon has a natural abundance of Si-28 of 92.23% and Si-30 of 3.1%.

Because the amount of protons and electrons in a neutral substance is equal, silicon also contains 14 electrons. 28 - 14 protons equals 14 neutrons since the mass number is equal to the sum of the protons and neutrons.

Unknown. By dividing by 100, convert each percentage of abundance to a decimal. This value should be multiplied by the isotope's atomic mass. Get the average atomic mass for each isotope by adding everything up.

To know more about mass number visit:-

https://brainly.com/question/4408975

#SPJ1

The Mo and W diatoms symbolize the greatest bond order attained between two atoms in the periodic table, which is six.

Bond order is the number of electron bonding pairs that exist between two atoms. A quadruple bond is a form of chemical relationship that involves eight electrons between two atoms. This bond is a variation on the more common double and triple bonds.

The number of bonds that an atom may make is frequently predicted by the number of electrons required to achieve an octet (eight valence electrons); this is notably true .

When three pairs of electrons come together, they create a triple bond.

learn more about W diatoms refer

https://brainly.com/question/1213876

#SPJ4

It would be challenging to calculate the percentage of simply acetic acid in vinegar if other acids were also present since they would mix with it.

A chemical that creates salts when it combines with specific metals while also releasing hydrogen atoms into water. Acids have a sour taste and give some colors, a reddish tint. Acids generated by the body, such stomach acid, can assist organ function. One type of acid is hydrochloric acid.

For instance, they can be used as an essential component in the chemical industry, like an electrolyte in a wet-cell battery (like a car battery), and to remove rust from metals.

To know about acid visit:

https://brainly.com/question/1512259

#SPJ4

The energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

The dental assistant can respond to this patient's concerns by telling the patient that the amount of radiation coming from the x-ray is minimal and will have no negative effect.

Given,

mass = 54.5 kg

Radiation = 5 μSv

Now

Energy per kg = 5 μSv *10⁻⁶ Sv / 14 Sv * 1 J/Kg/ 1 Sv

Energy per kg = 5 * 10⁻⁶ J/Kg

Then,

Energy per given weight of 54.5 kg

Energy per given weight = (54.5 kg)*(5*10⁻⁶)

Energy per given weight = 272.5 * 10⁻⁶ J

Therefore, energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

To know more about Dental X-ray, refer: https://brainly.com/question/29157665

#SPJ4

If our product includes succinimide, the IR spectra should show a prominent peak at around 1700 cm-1, suggesting an incomplete reaction.

There are several applications for these chemicals. The succinimides ethosuximide, phensuximide, and methsuximide are among the medications used as anticonvulsants. Succinimides are also utilized in a number of test procedures to create covalent connections between peptides or protein chains and polymers.

Succinimides inhibit voltage-dependent calcium leakage in thalamic neurons via acting on calcium T channels. Either the gastrointestinal system (vomiting, nausea, and abdominal discomfort) or the central nervous system are ethosuximide's side effects (lethargy, dizziness, and ataxia).

To know more about Succinimides visit:

https://brainly.com/question/10287370

#SPJ4

The molar mass of the unknown gas is 100.4 g/mol

What is Molar mass?

Molar mass of argon = 39.95 g/mol

After filling with argon the flask gained 3.221 grams

After filling with an unknown gas, the flask gained 8.107 grams

The gas with the higher molar mass will have the higher density.

Ar - 3.224 g; molar mass = 39.95 g/mol

X = 8.102 g; molar mass = ??

Molar mass of the unknown gas = 8.102g X *(39.95 g/mol  / 3.224 g)

                                                    = 100.4 g/mol

The molar mass of the unknown gas is 100.4 g/mol

We all wish to know how many molecules are present in a given substance. Atoms and molecules are incredibly small in both size and mass. One sample mole's weight is the molar mass. To determine the molar mass, connect the atomic masses (atomic weights) of each atom in the molecule. Using the mass listed in the Periodic Table or Atomic Weight Table, determine the atomic mass for each element.

Learn more about Molar Mass from given link

https://brainly.com/question/837939

#SPJ4

As the normal pH of blood is around 7.35, a lower pH of 7.20 is considered to be an indicator of acidosis.

For the normal metabolic function of the human body, the pH of the blood in the arteries is maintained between 7.35 and 7.45 through a complex feedback system between the various systems.

Acidosis occurs when an excess of Carbonic acid formed due to the reaction of carbon dioxide with water, is present in the body. The two main organs responsible for maintaining the pH are the kidneys and lungs. Even though a pH of 7.2 is normally considered alkaline, it is acidic relative to the normal pH of the blood.

To learn more about pH :

https://brainly.com/question/12609985

Plugging in the given values gives m = 745.3 g.

Specific heat is the quantity of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. It is measured in units of energy per unit mass per degree Celsius (J/ kg-K). The specific heat of a substance is determined by its physical and chemical properties. Typically, substances with higher specific heats require more energy to heat them up, meaning they are more resistant to changes in temperature. For example, water has a higher specific heat than most other substances, and therefore it takes a lot of energy to raise its temperature.

To find the mass of granite needed to store 150,000 J of heat, we need to use the formula for specific heat: q = m * c * ΔT. Rearranging this formula to solve for m gives m = q / (c * ΔT). Plugging in the given values gives m = 150,000 J / (800 J/g x °C * 15.5 °C) = 745.3 g.

To learn more about specific heat
https://brainly.com/question/28490764
#SPJ1

404.14 grams of CO will be needed to produce 635 g of CO₂ in this scenario.

The stoichiometric coefficient is the number put in front of the atoms, ions, and molecules in a chemical reaction to balance the amount of each element on the reactant and product sides of the equation.

In most cases, it is favorable for products and unfavorable for reactants. The stoichiometry of a chemical reaction is determined by stoichiometric coefficients.

Let's start by obtaining the reaction's equation:

The given reaction: Fe₂O₃ + 3CO → 2Fe + 3CO₂

We can see from the equation that the mole ratio of CO to CO2

The mole ratio of CO to that of CO₂= 3:3

The mole ratio of CO to that of CO₂= 1:1

Given that,

635 g of CO₂ is to be generated.

Mole of 635 g CO₂ = mass/molar mass = 635/44.01 = 14.43 moles

Thus, the equivalent mole of CO required will also be 14.43 moles.

Mass of 14.43 moles of CO = moles x molar mass

Mass of 14.43 moles of CO = 14.43 x 28.01

Mass of 14.43 moles of CO = 404.14 gm.

To produce 635 g of CO2, 404.14 gm of CO will therefore be needed.

To know more about Fe₂O₃ visit:

https://brainly.com/question/8993935

#SPJ1