Answer:
height = 45 m
Explanation:
Initial velocity = 0 m/s
Final velocity = 30 m/s
Acceleration due to gravity = +10m/s^2 ( because ball is going down )
Using the eqn of motion
[tex] {v}^{2} - {u}^{2} = 2gh[/tex]
where v= final velocity ; u = initial velocity ; g = acceleration due to gravity ; h = height
So,
[tex] {30}^{2} - {0}^{2} = 2 \times 10 \times h[/tex]
[tex] = > 20h = 900[/tex]
[tex] = > h = \frac{900}{20} = 45[/tex]
Q4. Cheetahs have a top speed of 120 km/h and can accelerate at a constant rate of 9.5 m/s2. How long would it take a cheetah, stalking its prey at 4.2 m/s, to reach its top speed?
Can someone plz help me on this, it would me alot to me
thx
Answer:
its a opinonated question
Explanation:
XD
as you heat a piece of wood on a fire, the temperature of the wood increases. what does this tell you?
a. the molecules in the wood are vibrating faster
b. the total thermal energy of the wood is decreasing
c. the chemical energy of the wood is increasing
d. the molecules in the wood are vibrating more slowly
Answer:
A.
Explanation:
I remember this one from my science class.
The molecules in the wood are vibrating faster .
What is Heating?During heating, the temperature of any object or substance increases. This cause the particles to move faster as they gain kinetic energy which leads to an increase in the collision rate as well as diffusion.
Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.
The International System of Units (SI) defines the calorie (cal) as the standard unit of heat. The cal measures the amount of energy transfer needed to raise the temperature of one gram of pure liquid water by one degree Celsius, provided that the water is above the freezing point and below the boiling point.
Therefore, The molecules in the wood are vibrating faster .
To learn more about Heat, refer to the link:
https://brainly.com/question/1429452
#SPJ2
Use this table of a school bus during morning pickups to answer the question.
What is the average speed of the bus between 2.8 km and 4.2 km?
Answer:
3.5
Explanation:
The answer should be 3.5
Answer:
3.5
Explanation:
I dropped a wet bar of soap on the ground is the bar of soap dirty or is the floor clean???
Answer:
the floor is clean and the soap is dirty. lol
A subwoofer needs a household voltage of 110 V to push a current of 5.5 A through its coil. What is the resistance of the subwoofer?
Answer:20Ω
Explanation:
A bus approaches red traffic light, and slows down from a speed of 15
m/s to rest in 3 seconds. What is the average acceleration (in m/s)?
Answer:
-5
Explanation:
-15/3
What is the most abundant gas in the atmosphere?
Group of answer choices
Oxygen
Nitrogen
Carbon Dioxide
Water Vapor
Answer: Nitrogen
Explanation: Nitrogen makes up 78% of the atmosphere, Oxygen makes up 21%, and Argon 0.9%.
Water vaper makes up between 1-4%, depending on the region.
Carbon Dioxide makes up only about 0.04%.
Answer: The answer is: Nitrogen
Explanation: I have my ways ;>
Study the arrow that is circled in the image.
What happens at this point?
Warm air is rising.
Cool air is sinking.
There is a difference in air pressure.
Cool air is less dense than warm air.
Answer:
There is a difference in air pressure.
Explanation:
I hope this helps you, BTW I got this right when I did the test
The given point is the separation between hot and cold current as a result of difference in air pressure.
What is a convection current?A convection current is a type of heat transfer that occurs from the movement of hot air and cold air due to difference in air pressure.
Upward arrowThe upward arrow shows hot air rising up due to its low density.
Downward arrowThe downward arrow shows cold moving downwards to replace the risen hot air due to its high density.
Thus, the difference in air pressure between the hot air and cold air is causes convection current.
Learn more about convection current here: https://brainly.com/question/20295382
A vector quantity is a quantity that has:
A.time and direction
B.magnitude and direction
C.direction only
D.magnitude and time
Answer:
B
Explanation:
a vector quantity has direction and magnitude
Volleyball was invented in 1905.
Answer:
REALLY??
Explanation:
Volleyball was invented in 1905.
A uniform marble rolls down a symmetric bowl, starting from rest at the top of the left side. The top of each side is a distance h above the bottom of the bowl. The left half of the bowl is rough enough to cause the marble to roll without slipping, but the right half has no friction because it is coated with oil.
Answer:
[tex]h' = \dfrac{5}{7}h[/tex]
Explanation:
To find how far will the smooth side will the marble go in the upper direction, measured vertically from the bottom (leave your answer in terms of h)?
From the given information:
The potential energy for the marble starting at rest is:
PE = m*g*h
In the bottom of the bowl; the marble exhibit a linear and rotational K.E
[tex]K.E_{total} = K.E _{linear} + K.E _{rot}[/tex]
[tex]K.E_{total} = \dfrac{1}{2}mv^2+I\omega^2[/tex]
[tex]K.E_{total} = \dfrac{1}{2}mv^2+ \dfrac{1}{2}( \dfrac{2}{5}mR^2) ( \dfrac{v}{R})^2[/tex]
[tex]K.E_{total} = \dfrac{1}{2}mv^2+ \dfrac{1}{5}mv^2[/tex]
[tex]K.E_{total} = (\dfrac{5+2}{10})mv^2[/tex]
[tex]K.E_{total} = \dfrac{7}{10}mv^2[/tex]
By applying Conservation of energy, The Total Energy occurring in the marble when it started at rest is the same as the total energy when it gets to the midpoint in the bowl.
i.e.
[tex]P.E = K.E_{total}[/tex]
[tex]mgh = \dfrac{7}{10 }mv^2[/tex]
10 × mgh= 7mv²
making v² the subject of the formula, we get:
[tex]v^2 = \dfrac{10}{7 }gh[/tex]
Let us remember that the rotational K.E occurring at the midpoint of the bowl is still unchanged at the time the marble is moving to the left side.
Thus, by applying the Conservation of energy balance:
The linear K.E at the midpoint = The P.E of the marble
∴
[tex]\dfrac{1}{2}mv^2 = mgh'[/tex]
Making h' the subject, we get:
mv² = 2mgh'
Divide both sides by m
v² = 2gh'
Recall that [tex]v^2 = \dfrac{10}{7 }gh[/tex]
[tex]\dfrac{10}{7} gh = 2gh'[/tex]
10 gh = 14 gh'
Divide both sides by 2g
5h = 7h'
[tex]h' = \dfrac{5}{7}h[/tex]
Justin strikes a 0.058-kg golf ball with a force of 260 N. If the ball moves with a velocity of 63 m/s, calculate the time the ball is in contact with the club
Answer:
0.014s
Explanation:
Given parameters:
Mass of the ball = 0.058kg
Force = 260N
Velocity of the ball = 63m/s
Unknown:
Time of contact = ?
Solution:
To solve this problem, we apply Newton's second law of motion which is mathematically expressed as;
Ft = m(v - u)
F is the force
t is time
m is the mass
v is the final velocity
u is the initial velocity = 0m/s
Insert the parameters and find t;
260 x t = 0.058(63 - 0)
260t = 3.65
t = 0.014s
What is the mass of a bird if it has a potential energy of 147J when flying at a height of 30 m above the ground?
Answer:
0.5kg
Explanation:
Given parameters:
Potential energy = 147J
Height = 30m
Unknown:
Mass of the bird = ?
Solution:
Potential energy is the energy due to the position of a body. Now, the expression for finding the potential energy is given as;
P.E = mgH
m is the mass
g is the acceleration due to gravity = 9.8m/s²
H is the height
147 = m x 9.8 x 30
m = 0.5kg
Can someone help me or find the answers to this chart please?
Explanation:
this is too though bro do it by ur self
Who could explain the phenomenom of interference of light?
Answer:
When the waves reflected from the inner and outer surface combine they will interfere with each other, removing or reinforcing some parts of white light by destructive or constructive interference. ... This results in color.
Explanation:
this is what we studied
so basically there is like a surface
and 2 different waves coming out of the same source
they will combine and start removing parts of the white light (which originally consists of 6 to 7 colors)
results in showing these colors
Which two explanations are based on personal beliefs?
I A. Certain mineral crystals have properties that help protect the
body from illness.
IB. A constellation's position in the night sky can be used to predict
events in a person's life.
I C. Medical data gathered over many years show that lack of
adequate sleep causes health problems.
D. Observations using microscopes reveal that all known organisms
are composed of tiny structures called cells.
I E. Data gathered during experiments show that there is an inverse
relationship between the force of gravity and distance.
Answer:
The correct options are A and B
Explanation:
Personal beliefs can be described as beliefs that have not been scientifically proven. These beliefs are generally as a result of religion, culture or tradition. Scientifically in theory, these beliefs lack clear path of possibility. For example, being in possession of certain mineral crystals in order to help protect the body against illness have a little possibility of being scientifically (in theory) explained. There is also no scientific evidence to support this claim.
There is also no scientific evidence to support the idea of the constellation's position to predict events in a person's life. This also has little possibility of being theoretically explained in science.
It should however be noted that there are exceptions/coincidences that suggest these events happen as it has been listed in the two options.
Answer: A and B!
Explanation: Just took the quiz.
When two objects collide, they experience the exact same amount of force in opposite directions.
O True
O False
Answer:
True
Explanation:
In a collision between two objects, both objects experience forces that are equal in magnitude and opposite in direction. Such forces often cause one object to speed up (gain momentum) and the other object to slow down (lose momentum).
Scott was watching the electrician install a new light fixture. Scott noticed that when he was finished, he carefully wrapped some wires with plastic caps and black plastic tape. Select the best explanation of why the electrician would wrap electrical wires with plastic products.
Answer: The electrician wrapped the wires with plastic caps because plastic is an insulator.
Explanation: Metals are excellent conductors of electricity, largely because electrons in the metal are only loosely bound by their respective atoms and thus will readily flow under the influence of an external electric field. Plastics are very different. All the electrons in plastics are tightly bound by their respective molecules and it would take a lot of energy to remove them. Consequently, most plastics are insulators that do not conduct electric current (or do so only poorly).
A plane travels at a constant speed of 250 m/s as it flies once around a horizontal circle whose radius is 2542m.
a) how long does it take to fly around the circle one ?
b) If the speed were to double, what would happen to the acceleration that the plane experiences ?
c) What is the current value of the acceleration that the plane experiences?
d) if possible, find the net force acting on the plane during this turn. If it’s not possible, what information are we missing?
when measuring the potential difference across a component, you need
Answer:
Measuring potential difference Potential difference is measured using a device called a . Just like ammeters, some types have a pointer on a dial, but most have a digital display. However, unlike an ammeter, you must connect the voltmeter in parallel to measure the potential difference across a component in a circuit.
I need the answer now
Answer:
It's C) color
Explanation:
--------
In the diagram, sonar is used to locate a sunken ship. If the sonar echo is heard after 3 seconds, how long did it take for the signal to reach the sunken ship? Why?
Answer:
1.5s
Explanation:
Given parameters:
Time taken for the echo to be heard = 3s
Unknown:
Time taken for signal to reach the ship = ?
Solution:
An echo is phenomenon that originates from wave reflection.
If the travel time of the echo is 3s, the time it takes the echo to reach the ship is half of this time.
So,
Time taken to reach the sunken ship = [tex]\frac{3}{2}[/tex] = 1.5s
How do you find the average speed of three speeds?
Answer:
Assess what information you are given. Use this method if you know:
the total distance covered by one person or vehicle; and
the total time it took that person or vehicle to cover the distance.
Explanation:
Hope this helps! I might be wrong, so tell me if I am
Answer:
Average speed can be calculated by dividing the total distance the object travels by the total amount of time it takes to travel that distance.
Explanation:
This is as much as I can help you, i don't know much else on how to do that ;w; sorry
What is .00245 in scientific notation?
Answer:
2.45 x 10^-2
Explanation:
All numbers in scientific notation or standard form are written in the form
m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.
To convert 0.0245 into scientific notation, follow these steps:
Step 1) Move the decimal 2 times to right in the number so that the resulting number, m = 2.45, is greater than or equal to 1 but less than 10
Step 2) Since we moved the decimal to the right the exponent n is negative
n = -2
Step 3) Write in the scientific notation form m × 10n
= 2.45 × 10-2
Therefore,
2.45 × 10-2 is the scientific notation form of 0.0245 number and 2.45e-2 is the scientific e-notation form for 0.0245
Here are some examples of decimal to scientific notation calculator
forces acting on a ball as it is being squeezed
What must be done to the wires used to make an electromagnet before they are connected
Answer:
Neatly wrap the wire around the nail
Explanation:
hope this helps ( not sure tho )
Before connecting the wires used to make an electromagnet, several steps are necessary. The steps are removing insulation from wire ends and cleaning and connecting the prepared wire ends.
First, the insulation surrounding the wire ends must be removed using a blade. Next, the exposed ends should be cleaned with a wire brush or sandpaper to eliminate any dirt or oxidation. Depending on the requirements, the wires can be twisted together for a temporary connection or soldered for a more secure joint. Lastly, the prepared wire ends are connected as needed to complete the circuit.
Therefore, these steps ensure that the wires are properly prepared, allowing for effective current flow and the formation of a functional electromagnet.
For more details regarding electromagnet, visit:
https://brainly.com/question/31038220
#SPJ2
Przyjrzyj się ilustracji, a następnie wykonaj polecenia.
2) Dopasuj do każdej cyfry rzymskiej nazwę substancjí z ramki poniže
. • lod
• szkło
V
• plastik
dwutlenek węgla
• woda
Answer:
what is this???
I don't know these kind of language exist...
car moves 5km East,3km south,2km West, 1km north find displacement
(please show me the way)
Answer:
3.605551275463989
Explanation:
solve using Pythagorean theorem
Complete the passage.
Sound waves and some earthquake waves are
waves. Ocean, light, and other earthquake waves are
waves.
Answer:
Answer: Sound waves and some earthquake waves are longitudinal waves. Ocean, light and other earthquake waves are transverse waves.
Explanation:
There are 2 types of waves:
1. Longitudinal waves: These waves are defined as the waves in which the particles of the medium move in the direction of the wave. This requires a medium to travel. For Example: Sound Waves.
2. Transverse wave: These waves are defined as the waves in which the particles of the medium travel perpendicularly to the direction of the wave. This does not require a medium to travel. These can travel in vacuum also. For Example: Light waves.
Hence, Sound waves and some earthquake waves are longitudinal waves. Ocean, light and other earthquake waves are transverse waves
Answer:
Longitudinal, transverse.
Explanation:
The definitions:
Longitudinal wave: A type of wave that transfers energy parallel to the direction of wave motion.
Transverse wave: A type of wave that transfers energy perpendicular to the direction of wave motion.
Also: