Calculate the equivalent resistance of the following circuit:

Req =

Answer:

To get to the door, the astronaut has to throw the book and pencil away from her in the direction opposite to that of the door.

Explanation:

Since no net force acts on her and she floats in the center of the room, if she throws the book and pencil away from her, since both her, the book and the pencil have an initial momentum p = 0, and since momentum is conserved, then after throwing the book and pencil away from her, the momentum of both her, the book and pencil is still zero.

The astronaut will thus develop a momentum which is opposite to that of the book and pencil. This is shown below.

Since p = p' where p = initial momentum of astronaut, book and pencil = 0 and p' = final momentum of astronaut, book and pencil = mv + m'v' where m = mass of book and pencil, v = velocity of book and pencil, m' = mass of astronaut and v' = velocity of astronaut.

So, p = p'

0 = mv + m'v'

mv = -m'v' where mv = momentum of book and pencil and m'v' = momentum of astronaut

v' = -mv/m

We see that the astronaut develops a momentum opposite in direction but equal in magnitude to that of the book and pencil and will thus develop a velocity opposite to that of the book and pencil.

Thus, to get to the door, the astronaut has to throw the book and pencil away from her in the direction opposite to that of the door.

Answer:

The correct answer is - none of the above.

Explanation:

Cell membranes or plasma membranes of the cell are composed mainly of fatty-acid-based lipids and proteins. Membrane lipids are of two types majorly, glucolipids, phospholipids, and sterols (generally cholesterol).

Sphingolipids are also a structural component of the cell membrane that helps in segregation into distinct membrane domains. Glycolipids are present on the surface of the plasma membrane.

Answer:

Explanation:

We need the power equation here, which is:

Power = (F * Δx)/time

where F * Δx is the amount of work done.

F is a force which is measured in Newtons. We are given the mass of the object, but since we need a Force measure, we need the weight of the object:

F = 2100(9.0)

F = 21000 to the correct number of sig dig.

Now we can plug in the values we have and solve for the displacement, Δx:

[tex]45000=\frac{21000x}{17.4}[/tex] and isolating x:

[tex]\frac{17.4(45000)}{21000}=x[/tex] so

x = 37 m

Answer:

a) Metres (m)

b) Kilogram (kg)

c) litres (l)

Answer:

work

Explanation:

it is a scalar quantity. it is equal to product of force and distance if the direction of motion is in direction of force in straight line

Answer:

work

Explanation:

:>)

Answer:

B. When the independent variable composed of categories and does not show a relationship to the dependent variable

Explanation:

A bar graph, is a graph used for presenting data grouped into categories, which are the independent variables of the graph, and the measurement of each category, which are represented as rectangular bars having lengths proportional to the value of the category, on a chart

In the bar graph or chart, there is no direct relationship between the categories, which are the x-values and the dependent variables , which are the length of the bars, the y-values, as the length of the rectangular bar in one category, cannot be obtained from another category through a relationship

Therefore, the correct option is option is when the independent variable composed of categories and does not show a relationship to the dependent variable

Answer:

 ΔT = [tex]\pi \ \frac{\Delta L}{\sqrt{Lg} }[/tex]

Explanation:

In a simple harmonic motion, specifically in the simple pendulum, the angular velocity

          w = [tex]\sqrt{\frac{g}{L} }[/tex]

angular velocity and period are related

          w = 2π / T

we substitute

          2π / T = \sqrt{\frac{g}{L} }

          T = [tex]2\pi \ \sqrt{\frac{L}{g} }[/tex]

In this exercise indicate that for a long Lo the period is To, then and increase the long

          L = L₀ + ΔL

we substitute

           T = [tex]2\pi \ \sqrt{\frac{L + \Delta L}{g} }[/tex]

            T = [tex]2\pi \ \sqrt{\frac{L}{g} } \ \sqrt{1+ \frac{\Delta L}{L} }[/tex]

in general the length increments are small ΔL/L «1, let's use a series expansion

           [tex]\sqrt{1+ \ \frac{\Delta L}{L} } = 1 + \frac{1}{2} \frac{\Delta L}{L} + ...[/tex]  

we keep the linear term, let's substitute

           T = [tex]2\pi \ \sqrt{\frac{L}{g} } \ ( 1 + \frac{1}{2} \frac{\Delta L}{L} )[/tex]  

if we do

           T = T₀ + ΔT

           T₀ + ΔT = [tex]2\pi \sqrt{\frac{\Delta L}{g} } + \pi \ \sqrt{\frac{L}{g} } \ \frac{\Delta L}{L}[/tex]

            T₀ + ΔT = T₀ + [tex]\pi \sqrt{\frac{1}{Lg} } \ \Delta L[/tex]

            ΔT = [tex]\pi \ \frac{\Delta L}{\sqrt{Lg} }[/tex]

Answer:

the final pressure of the gas is 60 kPa.

Explanation:

Given;

initial pressure of the gas, P₁ = 50 kPa = 50,000 Pa

initial temperature of the gas, T₁ = 27⁰ C = 27 + 273 = 300 k

final temperature of the gas, T₂ = 87⁰ C = 87 + 273 = 360 K

Let the final pressure of the gas = P₂

Apply pressure law;

[tex]\frac{P_1}{T_1} = \frac{P_2}{T_2} \\\\P_2 = \frac{P_1T_2}{T_1} = \frac{50,000 \times 360}{300} = 60,000 \ Pa = 60 \ kPa[/tex]

Therefore, the final pressure of the gas is 60 kPa.

Answer:

Length is the unit of metre

Answer:

From the meter, several other units of measure are derived such as the: unit of speed is the meter per second (m/s).

...

Units of Length

10 millimeters (mm) = 1 centimeter (cm)

10 decimeters = 1 meter (m)

10 decimeters = 1000 millimeters

10 meters = 1 dekameter (dam)

Answer:

solid

Explanation:

Answer:

In the solid state, the motion of molecules is only vibrational, because solids are very tightly packed together and cannot move other than by vibrating

Answer:

The correct option is: (A) Both R 1 and R 2 are greater than 5 Ω. Explanation: The equivalent resistance in parallel is smaller than the smallest resistance.

Explanation:

hopefully it helps- ^^

Answer:

20 degrees

Explanation:

Because projectile has the same range on both angles which on summation gives 90 degrees as a total.

Answer:

45 m/s

Explanation:

162 / 3.6 = 45 m/s

Divide by 3.6 to convert km/h to m/s.

→  Energía cinética

[tex]\large {\boxed {\bf E_c = \cfrac{mv^2}{2} }}[/tex]

[tex]\large {\text {$ \blue {\sf 250 g \rightarrow 0,25 kg }$}}[/tex]

[tex]\large {\text {$ \purple {\sf E_c = \cfrac{ 0,25 \cdot 25 }{2} \rightarrow \quad \cfrac{6,25}{2} = 3,125} $}}[/tex]

[tex]\large {\boxed {\boxed {\boxed {\bf E_c = 3,125 }}}}[/tex]

Answer:

See Explanation

Explanation:

Convection is a mode of heat transfer which involves the actual movement of the particles of a substance.

The hotter particles move upwards and are replaced by the cooler particles, thus a convection current is set up. This is due to the fact that cooler particles are denser than warmer particles.

Warm magma is found far beneath the earth. It rises to the surface due to convection current thereby leading to volcanos. Volcanic eruptions result from convection currents that occur underground.

Answer:

it is maybe A but i'm not 100% sure

Explanation:

its the only one that is mixed

Answer:

The answer is A. A transistor

Answer:

a transistor

Explanation:

A P E X

Given : Airplane is 0.68 kilometers long

We know that :

⊕   1 km = 1000 meters

⊕   1 m = 1000 millimeters

⇒   1 km = (1000 × 1000) millimeters

⇒   0.68 km = (0.68 × 1000 × 1000) millimeters

⇒   0.68 km = 680,000 millimeters

Answer: Airplane is 680,000 millimeters long

If an airplane is 0.68 Kilometers long, the length of the airplane in millimeters would be 680000 Millimeters, therefore the correct answer is option D.

A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.

As given in the problem, If an airplane is 0.68 Kilometers long, then we have to find out the length of the airplane in millimeters,

1 kilometers = 1000 meters

1 meter = 100 centimeters

1 centimeters = 10 millieters

As given the length of the plane is 0.68 Kilometers.

0.68 kilometers = 680 meters

0.68 kilometers = 680×100 centimeters

0.68 kilometers = 680×100×10  millimeters

                           = 680,000 millimeters

Thus, the correct answer is option C.

To learn more about the unit of measurement from here, refer to the link;

brainly.com/question/12629581

#SPJ2

Answer:

PLEASE MARK ME AS A BRAINLIEST

Explanation:

There are slight variations in the value of g about earth's surface. These variations result from the varying density of the geologic structures below each specific surface location. They also result from the fact that the earth is not truly spherical; the earth's surface is further from its center at the equator than it is at the poles. This would result in larger g values at the poles. As one proceeds further from earth's surface - say into a location of orbit about the earth - the value of g changes still.

Answer:

Option 1 is endothermic

Option 2 is exothermic

Explanation:

In Chemistry, Exothermic reactions are reactions whereby heat energy is transferred to the surroundings and the temperature of the surroundings increases. Endothermic reactions are those whereby heat energy from the surroundings is absorbed and thereby making the temperature of the surroundings to decrease.

This means in simple terms that endothermic reactions will have heat on the reaction side of the equation while exothermic will have heat on the product side of the equation.

Thus;

Option 1 is endothermic since it has heat absorbed on the reactant side.

Option 2 is exothermic since it gives off heat on the product side.

Answer:

B . Kinetic energy increases and potential energy decreases when the velocity of an object increases.

Explanation:

The statement with best compares potential energy and kinetic energy is that only kinetic energy increases when the velocity of the object increases.

Answer:

Explanation:

If the surface area of an object is smaller, it will create more pressure

An object's surface area is inversely proportional to its pressure.

This can be demonstrated from the formula below

The can be defined as the perpendicular force acting per unit area. the S.I  unit of pressure is N/m².

In View of the above equation, It can be seen that as the surface area of an object reduces the pressure created by the object will increase.

Hence, If the surface area of an object is smaller, it will create more pressure

Learn more about pressure here: https://brainly.com/question/25736513

Answer:

Ohm's law verifies that current directly varies with voltage, when resistance increases, current current decreases.

When temperature increases, the electrons gain more average kinetic energy increases and current increases as well.

In the same situation, resistance also increases because atoms of a component vibrate at higher amplitudes about their mean positions hence reducing the free path of electrons. This increases resistance, hence ohms law violated or disobeyed.

This generates the temperature coefficient of resistance

Answer:

[tex]E=5\times 10^{-5}\ J[/tex]

Explanation:

Given that,

A spring is compressed by 0.1 cm or 0.001 m

The spring constant of the spring, k = 100 N/m

The elastic potential energy in the spring is given by :

[tex]E=\dfrac{1}{2}kx^2\\\\E=\dfrac{1}{2}\times 100\times 0.001^2\\\\E=5\times 10^{-5}\ J[/tex]

So, the elastic potential energy of the spring is equal to [tex]5\times 10^{-5}\ J[/tex].

Answer:

a10

Explanation:

Answer:

Looks like its c 2x 10 m

Explanation:

i do see the question