Answer:
1800 j or 1.8 kj
Explanation:
Energy used = power (measured in watts) multiplied by time (measured by seconds)
1 minute is 60 seconds
30 multiplied by 60 is 1800
Answer:
1800 joule
Explanation:
Power (P) = 30W
Time (T) = 1 min =60 sec
P =(W/T)
30 = W / 60
W = 1800 joule
We know that Energy Is equivalent to Work done. So Energy used is 1800 joule.
Can you explain why number 3 is correct?
Q19. Which waves would be found at the surface at regions A and C?
1. P waves
2. S waves
3. No waves
The correct answer was number 3. But I don’t know why :(
Two boxes need to be moved into storage. Jamal and Jude each want to move a box. The force of gravity on both the boxes is 50 N. Jamal is lifting with a force of 60 N, and Jude is lifting with a force of 45 N.
Which best describes the movement of the boxes?
Jamal moved his box to storage, but Jude could not move his.
Jamal and Jude can successfully move each box into storage.
Jamal could not move his box to storage, but Jude could.
Neither Jamal nor Jude could move the boxes into storage.
Answer:
Explanation:
Remark
If both are trying to get the box into storage and they can only use lifting to do it, then Jude won't be able to do it. This assumes they cannot slide the boxes. Jude is not using enough force to overcome gravity so the box will just sit.
On the other hand Jamel is putting enough force to not only lift the box but it will move upwards against gravity. If we ignore that fact, then Jamel will get his box into storage.
Answer: A
A bullet travels at 850 m/s. How long will it take a bullet to go 1000 m?
Answer:
I say 150 because i aded 850+150= 1000 so yea thats how i got my answer
Explanation:
please help me with this
According to the graph of displacement vs. time, what is the object's velocity at a displacement of 0.2 meters?
According to the graph of displacement vs. time, the object's velocity is 0.02 m/s
What is displacement?The displacement is the shortest distance travelled by the particle. It is the vector quantity which re[presents both the magnitude and direction.
Velocity is the time rate of change of displacement with time.
Given is the displacement 0.2 m and time taken is 10s. So, the velocity is
v = 0.2/10
v = 0.02 m/s
Thus, the object's velocity is 0.02 m/s
Learn more about displacement.
https://brainly.com/question/11934397
#SPJ1
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. which of these tools should she use for this purpose? an electronic balance a stopwatch a barometer a graduated cylinder
Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
What is a stopwatch?Watch that, when turned on and off, measures the amount of time that has passed since a specific time.
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. Stopwatch is the tool she should utilize for this purpose.
Hence, option B is correct.
To learn more about the stopwatch refer;
https://brainly.com/question/13758413
#SPJ1
Answer: Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
option b
Explanation:
please help
a piece of wood of mass 40g and uniform cross-sectional area of 2cm^2 floats upright in water. calculate the length of the immersed part of the wood
The length of the immersed part of the wood is 0.2m.
What is density?The density is the ratio of the mass and the volume of the object. It is denoted by ρ.
ρ = mass/Volume = m/V
Volume = Area of cross-section A x height h
Given is a piece of wood of mass 40g =0.04kg and uniform cross-sectional area A= 2cm² =2x10⁻⁴ m² floats upright in water.
The density of water ,ρ = 1000 kg/m³
The density related to length of part immersed is
1000 = 0.04/ (2x10⁻⁴ x h)
h = 0.2m
Thus, the length of the immersed part of the wood is 0.2m.
Learn more about density.
https://brainly.com/question/9215083
#SPJ1
Are there conditions under which the incident light ray undergoes reflection but not transmission at the boundary? if so, then what are those conditions?
Total internal reflection causes light to be completely reflected across the boundary between the two media but not transmitted.
What is total internal reflection?The term total internal reflection occurs when light is moving from a denser to a less dense medium such as from glass to air. This phenomenon occurs at the interface between the two media.
There are two conditions necessary for total internal reflection and they are;
1) Light must travel from a denser to a less dense medium
2) The angle of incidence in the denser medium must be greater than the critical angle.
Total internal reflection causes light to be completely reflected across the boundary between the two media but not transmitted.
Learn more about total internal reflection:https://brainly.com/question/13088998
#SPJ1
Which type of volcanic mountain has wide, gentle slopes?
1) rift
2) shield
3)composite
4) cinder cone
A spinning turbine at an electrical plant produces energy that flows through wires to your house. The energy in the wires can be used to light up a computer screen. In this example, what type of energy transformations occurred
The spinning turbine converts mechanical energy into electrical energy that is converted into light energy used to light up the house.
What is law conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
The spinning turbine works on the principle of mechanical energy.
Thus, the spinning turbine converts mechanical energy into electrical energy that is converted into light energy used to light up the house.
Learn more about mechanical energy here: https://brainly.com/question/24443465
#SPJ1
Gina is burning different fuels label the diagram
The answer for the missing labeling as (i) and (ii) will be (i)thermometer and (ii)condenser.
What is a burner?A burner is a device intended to guarantee that the flame is stabilized.
By creating a proper flow field to cause the initial temperature rise, a The fuel/air combination is heated from within the flame to the ignition temperature.
When the flame or heat is created in fuel-burning or heat-generating equipment.
Wood, coal, kerosene, LPG, petrol, and diesel are a few of the often utilized fuels. In order to cook, heat, power vehicles, and create electricity, we utilize fuels.
The barrel, collar, air holes, gas intake, gas valve, and base are the different pieces of a Bunsen burner. Each component is essential to the process of creating a flame.
Hence, the answers for the missing labeling will be (i) thermometer and (ii) condenser.
To learn more about the burner refer;
https://brainly.com/question/1477483
#SPJ1
Which of the following statements is true about transverse waves?
A: They always have the same frequency.
B: They always have the same velocity.
C: They always have the same wavelengths
D:The particles vibrate in a parrallel direction with respect to the wave motion.
E: The particles vibrate in a perpendicular direction with respect to the wave motion
Answer:
The answer is option E
Explanation:
The particles vibrate in a perpendicular direction with respect to the wave motion
BRAINLIEST + 19 pts what does a capacitor do in a circuit?
A. it reduces current.
B. It increases voltage
C. It stores and releases charge.
D. it overcomes resistance
answer: c
explanation: it's job is to store and release charge
Answer:
C- It stores and releases charge
According to the law of conservation of energy, which statement must be true?
A. The total energy of a system can increase only if energy enters the system.
B. A system cannot take in additional matter.
C. The total energy in a system can only decrease over time.
D. Energy that is transferred cannot be transformed into a different type of energy.
Answer:
B. A system cannot take in additional matter.
Explanation: The total amount of energy in the universe remains constant, it can merely change from one form to another.
Hope it helps you:)))
have a good day
please help me with this
Answer: you got it duDee
Explanation:
What is the atomicWhat is the atomic mass of neon? Give your answer to the nearest tenth. number of neon?
Answer:
atomic mass = 20.2 amu
atomic number = 10
Explanation:
The atomic mass is the average mass of an atom of a particular element. For neon, the atomic mass is about 20.180 amu. Rounded to the nearest tenth, the atomic mass is 20.2 amu.
The atomic number is the number of protons in the nucleus of a particular element. For neon, the atomic number is 10.
Both of these values can usually be found on the periodic table under neon (Ne).
4) An electron in a mercury atom changes from
energy level b to level e. This energy-level
change occurs as the atom.
(1) absorbs a 2.03-eV photon
(2) absorbs a 5.74-eV photon
(3) emits a 2.03-eV photon
(4) emits a 5.74-eV photon
The energy-level change occurs as the atom is absorbs a 2.03-eV photon.
Energy change of the mercury atom
The energy change of the mercury atom is calculated as follows;
Energy emitted by a photon when it falls from level b to energy level e is calculated as follows;
ΔE = -3.71 eV - (-5.74 eV)
ΔE = -3.71 eV + 5.74 eV
ΔE = 2.03 eV
When electron jumps from lower energy level to higher energy level, energy is absorbed, thus, the energy-level change occurs as the atom is absorbs a 2.03-eV photon.
Learn more about energy level here: https://brainly.com/question/14287666
#SPJ1
it is a routine composed of yells and cheers gymnastic skill and dance
Cheer dance is a routine composed of yells and cheers gymnastic skill and dance.
What is cheer dance?Cheer dance or cheerleading is a group activity used to entertain fans at athletic events and inspire louder, more enthusiastic cheering. It combines dancing and acrobatic aspects with shouted phrases.
A never-ending range of diverse stunts, jumps, pyramids, dances, and chants that integrate a variety of different movements can be included in the immensely complex sport of cheerleading. Base, partner, and spotter are the three primary cheerleading roles. These roles are all a part of cheerleading stunts, which pose the greatest risk of harm to participants.
It is a competitive sport and leisure activity made up of a set routine with necessary performance components, much like in gymnastics and dance. Additionally, it hopes to get the crowds to cheer in team sports event.
Learn more about cheer dance, refer the link:
https://brainly.com/question/29788167
#SPJ2
Your question is incomplete, but most probably your full question was:
1. It is a routine composed of yells and cheers, gymnastic skills and dance.
A. Contemporary dance
B. Hip-hop dance
C. Street dance
D. Cheer dance
How fast would you (70kg) need to run in order to have the same momentum as a car (750kg) driving at 5 km/hr?
From the calculations and the data provided, the speed is obtained as 15 m/s
What is momentum?The term momentum refers to the product of mass and velocity. Given that we can now proceed with the answer.
Since;
p = mv
m = 750kg
v = 5 km/hr or 1.4 m/s
p = 750kg * 1.4 m/s
p = 1050 kgm/s
If the mass of the body is 70kg, the speed is
v = p/m
v = 1050 kgm/s/70 Kg
= 15 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
Q2 Alice wants to find the pressure she exerts upon the floor. She measures the length and width of her shoe and multiplies them together to get a rough area. She then doubles the answer. She divides her weight in newtons by the total area she has worked out. a) Why won't her area measurement be very accurate?
Answer:
The area estimate is somewhat inaccurate because the length * width of the shoe will be an inaccurate measurement of the area of the shoe that actually contacts the floor.
What do echolocation and ultrasounds have in common?
A stunt pilot in an air show performs a loop-the-loop in a vertical circle of radius 3.80 103 m. During this performance the pilot whose weight is 623 N, maintains a constant speed of 2.10 102 m/s. (a) When the pilot is at the highest point of the loop determine his apparent weight in N. N (b) At what speed, in m/s, will the pilot experience weightlessness
The apparent weight of the pilot would be 619.48 N and the speed he would experience at weightlessness is 192. 97 m/s
What is apparent weight?
Apparent weight is a property of object that co-relates to the heaviness of the object.
It differs from the weight of an object as a result of the in-balance between the force acting on the object and an equal but opposite force
How to calculate the apparent weight
Formula:
Apparent weight = Real weight (mg) - m v∧2 ÷ r
Where m = mass
g = acceleration due to gravity = 9.8 m/s²
v = constant velocity = 2. 10 × 10∧2 m/s
r = radius = 3.80 × 10∧3 m
Note that weight = mg
m = weight ÷ g = 623 ÷ 9.8 = 63. 57 kg
a. Apparent wieight = 623 - (63. 57 × 2.10 × 10∧2 × 2.10 × 10∧2) ÷ 3.80 × 10∧3)
= 623 - (63.57 × 210) ÷ 3800
= 623 - 13377 ÷ 3800
= 623 - 3. 52
= 619.48 N
b. At weightless, weight = 0
Speed, V = √g× r = √ 9.8 × 3800 = √37,240 = 192. 97 m/s
Hence, The apparent weight of the pilot would be 619.48 N and the speed he would experience at weightlessness is 192. 97 m/s
Read more on apparent weight here:
https://brainly.com/question/11180653
#SPJ1
an object with a density of 250 kg/m3 floats on water. what portion of the object is submerged?
The portion of the object submerged in water is determined as 0.25.
Fraction of the object submerged in waterThe fraction of the object submerged in water is calculated as follows;
S.G = (density of object) / (density of water)
where;
S.G is specific gravityS.G = (250 kgm⁻³) / (1000 kgm⁻³)
S.G = 0.25 = ¹/₄
Thus, the portion of the object submerged in water is determined as 0.25.
Learn more about density here: https://brainly.com/question/1354972
#SPJ1
For an object on a flat surface, the force of gravity is 15 newtons downward and the normal force is 15 newtons upward. The applied force is 10 newtons toward the left and the frictional force is 8 newtons toward the right. What is the magnitude and direction of the net force?
2 newtons toward the right
2 newtons upward
2 newtons toward the left
2 newtons downward
Answer:
There is a net force of 2 N to the left.
With 8 N to the left the up/down and left/right forces are in balance.
The force left over is 2 N to the left.
Ten minutes after you stop exercising, your heart rate should be (2 points)
equal to your Heart Rate Reserve
in your Target Heart Rate Zone
less than 50 beats per minute
less than 100 beats per minute
Ten minutes after you stop exercising, your heart rate should be equal to your heart rate reserve
What is Heart Rate Reserve?
This is defined as the heart rate the body decreases to after an exercise session has been done.
This however varies according to age of individuals and is calculated by finding the difference between the maximum and resting heart rate.]
Read more about Heart rate here https://brainly.com/question/1575299
#SPJ1
Complete the following hypothesis the pressure lncrease as
Temperature is increased the pressure also increases due to fast movement of molecules because of more energy.
How temperature is related to pressure?The temperature of the gas is directly proportional to the pressure. Faster moving particles will collide with the walls of the container that put force on the wall which leads to increase in pressure.
So we can conclude that temperature is increased the pressure also increases due to fast movement of molecules because of more energy.
Learn more about pressure here: https://brainly.com/question/25736513
#SPJ1
How does the force of gravity vary with distance
The force of gravity vary inversely with square of distance between two objects.
What is gravity?The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.
The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.
F = GMm/d²
here G is the gravitational constant.
If the distance changes, the force of gravitation changes. The mass remains the same.
Thus, the force of gravity vary inversely with square of distance between two objects.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
If the inside of a container has a surface area of 20cm², what will be the pressure on each square inch of the container if 117.6kg of force are applied to the container?
Answer:
Explanation:
given :-
force applied = 117.6N
Area = 20 m^2
Pressure =?
solution:-
Pressure = Force / Area
= 117.6 N / 20 m^2
= 5.88 Pascals
Hope it helps :D!
Explanation:
a balloon was inflated to a temperature of 32 degrees celsius. as it floated into the sky it reached a temperature of 0 degrees celsius. what is the new volume
Answer:
P V = N R T so
V2 / V1 = T2 / T1 assuming other variables stay constant
V2 = (273 / 305) * V1
V2 = .90 V1
which one has the most potential energy
Answer:
A
Explanation:
A has the most potential energy as it is higher up so it has the most gravitational potential energy.