The amount of heat to absorb is 6261 J
The heat capacity is the amount of heat expressed usually in Joules or calories needed to change the system by 1 degree Celsius
Here the calculation for heat is
Heat required to raise the temprature of ice form -20°C to 0°C
Then the formula for specific heat is used to calculate the amount of heat
Q = c×m×ΔT
Where Q = heat exchanged by a body
m = mass of the body
c = specific heat
ΔT = change in temprature
Then the given data is
m = 10g
Specific heat of the ice = 2.1
ΔT = 0°C - (-20°C) = 20°C
Then substituting the value
Q = 10g× 2.1× 20°C
Q = 420 J
Heat required to convert 0°C ice to 0°C water
The heat Q necessary to melt a substances depend on its mass m and this called latent heat of fusion of each substances
Q = m×ΔH fusion
Heat required to raise the temprature of water from 0°C to 60°C
m = 10g
Specific heat of water = 4.18
ΔT = 60°C -(- 0°C) = 60°C
Then substituting
Q = 10g×4.18×60°C
Q = 2508 J
Then Q total = 420J+3333J+2508J
Q total = 6261 J
The amount of heat to absorb is 6261 J
Know more about ice
https://brainly.com/question/17150917
#SPJ4
Complete the following statement: when ---(1)--- freezes at 0⁰
Celsius, it will ---(2)---.
When water freezes at [tex]O^{o}[/tex] Celsius. it will release heat.
When the liquid water turns to solid ice we find that water freezes without getting any colder. That's because the latent heat of fusion is being lost from the liquid as it solidifies and the temperature of the water does not fall so quickly
Does freezing water release heat?
When water becomes a solid, it releases heat, warming up its surroundings. This makes freezing an exothermic reaction.
Does water melt or freeze at 0 Celsius?
At temperatures below 32°F (0°C), liquid water freezes.
Thus, when water freezes at [tex]O^{o}[/tex] Celsius. it will release heat.
To know more about water at [tex]O^{o}[/tex]C:
https://brainly.com/question/19435044
#SPJ1
1. What is TRUE about hair samples from a human body?
Hair morphology stays the same as an individual gets older.
O
Every hair taken from the same scalp has matching physical characteristics.
O
Physical properties can be used to most accurately individualize hair.
Hair samples can be different even when taken from the same person.
Hair samples can be different even when taken from the same person
is true about the human body.
What is Hair samples?
A collection of hair strands known as a hair sample is most frequently taken from a person's head. Hair from the past year is typically present in hair samples. Despite the fact that hair growth varies, 5 inches of hair are typically added in 12 months.
What is physical properties of hair?
Elasticity, stiffness, cross-sectional area, form, density, and static charge are some of these characteristics. These attributes, along with hair's resistance to water and stretching, all affect how it looks on a daily basis.
Hence Hair samples can be different is a correct answer.
To know more about Hair samples energy follow link
https://brainly.com/question/1808352
#SPJ1
to a friend's house in 40 minuter. The two
house in 20 mine tes
11. A roller coaster accelerates from 20 m/s to 80 m/s in 2 seconds as it
goes from the top to the bottom of the hill. The mass of the roller coaster
is 1,000 kg. How much force is the roller coaster generating at the bottom ots
of the hill?
A. 30,000 N
B. 80,000 N
C. 12,5 N
D. 20,000 N
The force that the roller coaster is creating under the top of the hill is A) 30000 N.
It is given that the initial velocity is 20m/s and final velocity is 80m/s and the time is 2s.
The force required to accelerate a mass from 20 m/s to 80 m/s in 2 seconds is given by the equation:
F = (m * (v - u)) / t
where m is the mass of the object, v is the final velocity, u is the initial velocity, and t is the time.
Substituting the values given in the question, we get:
F = (1000 kg x (80 m/s - 20 m/s)) / 2 s
F = 1000 x 30
F = 30,000 N
Hence, the correct option is A) which is 30000N. It is the force generated by the roller coaster at the bottom of the hill.
To know more about acceleration, click below:
https://brainly.com/question/460763
#SPJ1
Which statement(s) best describe why table sugar is
considered a pure substance?
SELECT ALL THAT APPLY
a Sugar is a mixture of pure compounds
d
b A bowl of sugar contains only one compound
c Sugar is solid like all other pure substances
Sugar cannot be separated further by physical
means
Sugar has the same chemical composition
e throughout
Best describe table sugar is considered a pure substance is Sugar has the same chemical composition throughout
Table sugar is pure sucrose derived from sugar beet or sugar cane and sucrose is the disaccharide consisting of glucose and fructose and it is produced by green plant in the process of photosynthesis and since the chemical composition of sugar is definite and does not vary hence it is pure substance and table sugar refer to standard while white sugar that you see in your cooking baking or cup of tea at home and the scientific name foe table sugar is sucrose
Know more about pure substance
https://brainly.com/question/143254
#SPJ1
suppose you mix g of water at with g of water at in an insulated cup. what is the maximum temperature of the water after mixing?
The maximum temperature of the water after mixing is 38.51°C
Heat values is derived from the equation:
q = mcΔT
where
q = heat ( J)
m= mass ( kg)
c = specific heat capacity
ΔT = change in temperature
T2 = final temperature
T1 = initial temperature
M of H2O × c × ( T1 - T2) = M of H2O × c × ( T2 - T1 )
29.2 g × ( 78.2° - T2 ) = 67.3 × ( T2 - 21.3° )
2283.44 - 29.2 ×T2 = 67.3 × T2 - 1433.49
3716.93 = 96.5 × T2
T2 = 38.51°C
Learn more about specific heat at https://brainly.com/question/21406849
#SPJ4
Note: here is the completed question
Suppose you mix 29.2 g of water at 78.2°C with 67.3 g of water at 21.3°C in an insulated cup. What is the maximum temperature of the water after mixing?
which of the following does not influence the speed of a chemical reaction? a) concentration of reactants b) nature of reactants c) temperature d) presence of a catalyst e) none of these
All of the options mentioned above influence the speed of a chemical reaction. Only the molecularity of the reaction doesn't influence the rate of the reaction.
What is a Chemical reaction?
A chemical reaction is a procedure that causes one group of chemical substances to change chemically into another. Chemical reactions are typically defined as changes that only affect the positions of electrons in the formation and dissolution of chemical bonds between atoms, with really no alteration to the nuclei. These changes are frequently captured by a chemical equation. The study of chemical reactions involving unstable and radioactive elements, where both electronic as well as nuclear changes may take place, is known as nuclear chemistry.
Reactants or reagents are the substance(s) or substances that are initially utilised in a chemical reaction. Chemical reactions typically involve a chemical change and produce one or even more products, which typically differ from the reactants in some ways.
To learn more about chemical reaction click on the given link:
https://brainly.com/question/11231920
#SPJ4
of the following oxides, is the most acidic. question 5 options: a) co2 b) al2o3 c) na2o d) cao e) li2o
Among the following oxides Al2O3 is the most acidic.
An acidic oxide is an oxide that when combined with water gives acid. A basic oxide is an oxide that when combined with water gives off a base. Consider when a substance reacts chemically, both as a base or acid is termed as amphoteric oxide. Neutral Oxide is one that neither has an acidic characteristic nor a basic one.
Acidic oxides are generally those that are electron deficient species or generally those that have the high oxidation number. Considering this Na2O, Li2O, CaO are metallic oxide of s block. These metallic oxides powerful bases, while Al2O3 is metallic oxide of p block which has comparatively more acidic character. Hence, it is the most acidic oxide among all. CO2 is also a strong acid but it is weaker than Al2O3.
To know more about oxides.
https://brainly.com/question/15578795
#SPJ4
at what trophic level does the fish appear in food web in 2d?
Fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
What is tropic level ?The place an organism holds in a food chain determines its trophic level. A food chain is a series of living things that consume other living things and may eventually consume themselves. An organism's trophic level is determined by how far down the food chain it is.
A trophic level in an ecosystem is a stage in the food chain or nutrient cycle. The distance a creature is from the start of the food chain, in simple terms, indicates its trophic level.
Thus, the fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
To learn more about tropic level follow the link below;
https://brainly.com/question/15065872
#SPJ1
Calculate the number of molecules of NO2 in 0.25 mol of NO2 . Please show your work to receive credit.
Calculate the number of molecules of NO2 in 0.25 mol of NO2 . Please show your work to receive credit.
The total number of moles are given by n = 0.25 moles and N=6.022×10²³molecules/mole is the Avogadro number. N is equal to 6.0220 × 10²³ molecules/mole. Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.
What is mole ?The International System of Units uses the mole symbol as mol as the unit of material quantity. How many elementary entities of a certain substance are present in an item or sample is determined by the quantity of that material. It is specified that the mole contains precisely 6.022 × 10 ²³ elementary entities.
The term was generally first used by German chemist Wilhelm Ostwald. However, the Latin term moles, which meaning "a mass," is where the word mole ultimately originates, not from German. A comparable term to mole is molecule, it is the diminutive and means "a little mass."
Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.
To learn more about mole follow the link below;
https://brainly.com/question/26416088
#SPJ1
What could the fourth quantum number of a 2s² electron be?
O A. mg = -1
O B. ms = 0
O C. mg = +1
O D. mg = + 1/
ANSWER PLS!!
The fourth quantum number of a 2s² electron is -1/2.
What is quantum number?
Quantum numbers are the collection of numbers used to characterise the position and energy of an electron in an atom.
A quantum number is a value used to describe the energy levels that atoms and molecules have. For the hydrogen atom, an electron has four quantum numbers that define its state and produce solutions to the Schrödinger wave equation.
The quantum numbers are as follows:
n - the primary quantum number, which describes the energy level
l denotes azimuthal or angular momentum. quantum number: defines the subshell ml or m - magnetic quantum number: defines the subshell orbital ms or s - spin quantum number: defines the spin
In your scenario, you must decide which possible values can be ascribed to an electron's fourth quantum number in a 2 s 2 orbital.
The electron's energy level, or shell, is described by the primary quantum number. Because the electron is on the second energy level in this situation, n = 2.
The subshell in which the electron is placed is described by the angular momentum quantum number, l. The angular momentum quantum number for an s-orbital is equal to l = 0.
The magnetic quantum number, m l, specifies the orbital in which the electron can be found.
Because it is dependent on the s-orbital, the magnetic quantum number can only take the value 0.
Therefore , fourth quantum number of a 2s² electron is -1/2.
Learn more about quantum number from given link
https://brainly.com/question/2292596
#SPJ1
Foods that are high in blank have the least impact on slowing the body's absorption rate of alcohol.
Foods that are high in carbohydrates have the least impact on slowing the body's absorption rate of alcohol.
What is human digestive system?
The digestive system of the human body is made up of the gastrointestinal tract and additional digestive organs (the tongue, salivary glands, pancreas, liver, and gallbladder). In order for food to be absorbed and incorporated into the body, it must first be broken down into smaller and smaller components during digestion. Cephalic, gastric, and intestine phases make up the three
Our body will immediately start absorbing alcohol when you are hungry. However, because alcohol is not soluble in fat, fatty foods effectively create a barrier through which it cannot easily travel. This will greatly slow down alcohol absorption.
Hence, foods that are high in carbohydrates have the least impact on slowing the body's absorption rate of alcohol.
To know more about digestive system from the given link
https://brainly.com/question/18639907
#SPJ4
which isoelectronic series is correctly arranged in order of increasing radius? question 12 options: a) ca2 < ar < k < cl- b) ca2 < k < ar < cl- c) ca2 < k < cl- < ar d) k < ca2 < ar < cl- e) cl- < ar < k < ca2
b) Ca2 < K < Ar < Cl-
In Isoelectric series ions group contains the same number of electrons.
Here, the ionic radius of Ca2 is 100pm, K is 138pm, Ar is 181pm and Cl- is 184pm.
In option a, Ar has higher ionic radius than k which is incorrect. In option c, cl- higher ionic radius than Ar which is incorrect too. In option d, K has higher ionic radius than Ca2 which results in incorrect. In option e, Cl- has the highest ionic radius among all, which results in incorrect too.
To know more about Isoelectric series
https://brainly.com/question/5584697
#SPJ4
The pressure of a gas is reduced from 1200. 0 mm hg to 850. 0 mm hg as the volume of its container is increased by moving a piston from 85. 0 ml to 350. 0 ml. What would the final temperature be if the original temperature was 90. 0 °c?.
Answer: T2=233K
Explanation:
The pressure and volume change. The combined gas law is always needed for that concept.
P1*V1/T1=P2*V2/T2
Temperature MUST ALWAYS be in Kelvin
T1=90+273=363K
1200*85/363=850*350/T2
T2=233K
Hope this helps! :)
If one-eighth of the mass of the original smple of a radioisotope remains unchanged after 4,800 years, the isotope could be? Show all work and explanation.
A. H-3
B. K-42
C. Sr-90
D. Ra-226
Based on the half-life of the material, the isotope is radium-226; option D
What is the half-life of a substance?The half-life of a substance is the time taken for half of the amount of material present in the original sample of the material to decay.
The half-life of materials differs from each other. The half-life may be in millions of years for some materials, whereas for some materials, the half-life could only be in seconds.
The half-life of materials is constant.
Considering the given material;
One-eighth of the mass of the original sample of the radioisotope remains unchanged after 4,800 years.
For one-eight of the material of the isotope to remain, the number of half-lives it has undergone will be;
after one half-life = half of the original sample remains
after two half-lives = one-fourth of the original sample remains
after three half-lives = one-eight of the original sample remains
The half-life of the isotope = 4800/3
The half-life of the isotope = 1600 years
Radium-226 has a half-life of 1600 yers
Learn more about half-life at: https://brainly.com/question/1160651
#SPJ1
A 1.362 g sample of an iron ore that contained Fe3O4 was dissolved in acid and all of the iron was reduced to Fe2+. The solution was then acidified with H2SO4 and titrated with 39.42 mL of 0.0281 M KMnO4, which oxidized the iron to Fe3+. The net ionic equation for the reaction is 5Fe2+ + MnO4- + 8H+ h 5Fe3+ + Mn2+ + 4H2O (a) What was the percentage by mass of iron in the ore? (b) What was the percentage by mass of Fe3O4 in the ore?
Based on the equation of the reaction;
the mass of iron (ii) ion present in the sample ore is 0.31 gthe percent mass of iron in the ore is 22.8%What is the percentage mass of iron in the ore?The percentage mass of iron in the ore is determined from the net ionic equation of the reaction as follows:
5 Fe²⁺ + MnO₄⁻ + 8H+ ---> 5 Fe³⁺ + Mn²⁺ + 4 H₂O
The mole ratio of the reaction shows that 5 moles of the iron (ii) ion is oxidized by 1 mole of tetraoxomanganate (vii) ion, MnO₄⁻.
The moles of tetraoxomanganate (vii) ion, MnO₄⁻ that reacted with al the iron present in the ore is determined as follows:
Moles of substance = molarity * volume in liters
Moles of tetraoxomanganate (vii) ion, MnO₄⁻ = 0.0281 * 39.42/1000
Moles of tetraoxomanganate (vii) ion, MnO₄⁻ = 0.001108 moles
Moles of iron (ii) ion present in the sample = 0.001108 * 5
Moles of iron (ii) ion present in the sample = 0.00554 moles
Mass of iron (ii) ion present in the sample = 0.00554 * 56
Mass of iron (ii) ion present in the sample = 0.31 g
Percent mass of iron in the ore = 0.31/1.362 * 100%
Percent mass of iron in the ore = 22.8%
Learn more about percentage mass at: https://brainly.com/question/26150306
#SPJ1
The hydrides of group 5a are nh3 , ph3 , ash3 , and sbh3. Arrange them from highest to lowest boiling point.
The hydrides of group 5a are NH₃ , PH₃ , AsH₃ , and SbH₃, the arrangement of these from highest to lowest boiling point is SbH₃ > NH₃ > AsH₃ > PH₃
The boiling point is the temperature at which the vapor pressure of any liquid equals the pressure of the gas above it. The boiling point depends on the molecules' intermolecular forces and molecular weight. To arrange the given molecules according to the boiling point, we look at the molecular weight and the intermolecular forces. Due to the high molecular weight SbH₃ shows the highest boiling point. N shows 2nd highest boiling point due to high H-bonding, the least boiling is shown by PH₃.
You can also learn about intermolecular forces from the following question:
https://brainly.com/question/9007693
#SPJ4
Cyclohexanol, C6H₁1OH, is an organic chemical used in the production of nylon.
How many hydrogen atoms are in 2.25 moles of cyclohexanol? Give your
answer in scientific notation.
5.09 x 1025
1.63 x 1025
9.62 x 1024
1.49 x 1025
The number of atoms of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O is 1.63×10²⁵ atoms
How do I determine the number of atoms?First, we shall determine the number of moles of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O. This is shown below
1 mole of cyclohexanol, C₆H₁₂O contains 12 moles of hydrogen, H
Therefore,
2.25 moles of cyclohexanol, C₆H₁₂O, NF₃ will contain = 2.25 × 12 = 27 moles of hydrogen, H
Finally, we shall determine the number of atoms of hydrogen pressnt in 2.25 moles of cyclohexanol, C₆H₁₂O. This can be obtained as follow:
From Avogadro's hypothesis,
1 mole of hydrogen = 6.02×10²³ atoms
Therefore,
27 moles of hydrogen = 27 moles × 6.02×10²³ atoms
27 moles of hydrogen = 1.63×10²⁵ atoms
Thus, we can draw our conclusion that the number of atoms of hydrogen present is 1.63×10²⁵ atoms
Learn more about number of atoms:
https://brainly.com/question/20712650
#SPJ1
calculate how many grams are in :
2 moles of hydrogens atoms
Answer: 4 grams
Explanation:
The weight of one mole of hydrogen gas is 2 grams.
hence,there are 4 grams in 2 moles of hydrogen atom.
Compare and contrast metallic and ionic bonds, including the element groups they are made of, the behavior of electrons, and their typical properties.
The metallic bonds and the ionic bonds do involve charged species while the covalent bonds do not involve charged species.
What are metallic bonds?The term bond has to do with the interactions that holds two atoms together. There are different kinds of bonds that we have in chemistry and these include;
Ionic bondMetallic bondCovalent bondThe ionic bond involves the transfer of electrons from one atom to another usually from a metal to a non metal. This results in the formation of ions. In the metallic bond, there is a sea of electrons that lies over metallic ions. In the case of the metallic bonds and the ionic bonds, there are charged species that are present in the system.
For the covalent bonds, there is a sharing of electrons in the bond and then many of the compounds that have the covalent bonds are fond to be nonpolar.
Learn more about ionic bonds:https://brainly.com/question/11527546
#SPJ1
after studying the causes of physical weathering in the table on the next page, infer wich type of weathering caused the rock shown above to split.explain your reasoning
Physical weathering is caused by the effects of temperature changes on rocks, causing them to break apart. The process is sometimes aided by water.
Abrasion Weather effects such as wind and water break rocks into small pieces. Exfoliated weathered rock expands and fractures when pressure is released from unloading. Frostwedge rock cracks when water freezes and expands. Chemical weathering involves the interaction of rocks with mineral solutions (chemicals), changing the composition of rocks.
Rocks are formed by weathering and erosion that break down existing rocks through physical and chemical processes. Examples of chemical weathering include rust caused by oxidation and acid rain caused by carbonic acid dissolving rocks. Other Chemical Weathering B. Dissolution. Rocks and minerals break down to form soil.
Learn more about Weathering here:-https://brainly.com/question/829782
#SPJ9
Assuming only single bonds are used…
1. what shape does a central atom from group 4a (14) have?
2. what shape does a central atom from group 5a (15) have?
3. what shape does a central atom from group 6a (16) have?
1) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 14 is tetrahedral.
The general electronic configuration of group 14 elements is ns²np² and it is shown in box diagram in the attached image. When one electron is excited, it goes in vacant p-orbital and the p and s-orbital is half filled. It is shown in attached image.
When the another atoms are filled in the half-fiiled orbital, it forms sp³ hybridisation and its shape is tetrahedral.
Therefore, the shape of central atom of group 14 is tetrahedral.
2) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 15 is pyramidal.
The general electronic configuration of group 15 element is ns²np³ and its box diagram is already shown in the image. When atoms are filled, it goes in p-orbital and pair of electron acts as a lone pair. Due to this lone pair, lone pair-bond pair repulsion is occurred and the geometry of the central atom is pyramidal.
Therefore, the shape of central atom of group 15 is pyramidal.
3) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 16 is bent.
The general electronic configuration of group 16 is ns²np⁴ and its box diagram is shown in the attached image. There are two electron pairs which acts as a lone pair and another two orbitals are filled by another atom. When they are filled, it shows lone pair-lone pair, lone pair-bond pair and bond pair-bond pair repulsion. Therefore, they are come closer to each other and forms bent shape.
Therefore, the shape of the central atom of group 16 is bent shape.
To know more about the shape and hybridisation of the central atom
https://brainly.com/question/13291133
#SPJ1
in the experimental procedure, what is the advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point?
The advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point is to carry the reaction in the forward direction by refluxing the set.
What is boiling point?Boiling point is defined as the bulk phenomenon. It is the temperature at which the pressure of atmosphere is equal to the pressure of the vapour or vapour pressure.
Since, high boiling point solvent are used during the procedure to reflux the set which help in carrying out the reaction in the forward direction. If we had used low boiling point solvent instead of high all of the solvent evaporated and refluxing of the mixture of reaction to get product for maximum production could not have been possible.
Thus, we concluded that the advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point is to carry the reaction in the forward direction by refluxing the set.
learn more about boiling point:
https://brainly.com/question/14771622
#SPJ4
Why does the developing chamber need to be prepared before adding the tlc plate?.
The developing chamber needs to be prepared before adding the tlc plate in order to ensure that the plate is placed in the correct position and to prevent contamination.
What is TLC?
Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). A sheet of an inert substrate, such as glass, plastic, as well as aluminium foil, is used for thin-layer chromatography. This substrate is coated with a thin layer of an adsorbent material, typically silica gel, aluminium oxide (alumina), as well as cellulose. The stationary phase refers to this adsorbent layer. A solvent as well as solvent mixture (referred to as the mobile phase) has been drawn up the plate by capillary action after the sample has been placed on the plate. Separation is accomplished because various analytes ascend this same TLC plate at various rates.
The developing chamber should be ready before the TLC plates are added, allowing the chamber time to become saturated with the developing solvent and producing quicker, more consistent results.
To learn more about TLC click on the given link:
https://brainly.com/question/14219599
#SPJ4
Is there an element that starts with L?
Answer:Lanthanum
Explanation:
Lithium stars with the letter L in the periodic table.
What is lithium?
The chemical element lithium has the symbol Li and the atomic number 3. It is a silvery-white alkali metal that is soft. It is the least dense metal and the least dense solid element under ordinary conditions. Because lithium, like all alkali metals, is very reactive and combustible, it must be stored in a vacuum, inert environment, or inert liquid such as pure kerosene or mineral oil. It has a metallic shine when cut, but damp air quickly corrodes it to a dull silvery grey, then black tarnish. It is never found naturally, but only in (typically ionic) compounds such as pegmatitic rocks, which were historically the primary source of lithium. It is found in ocean water due to its solubility as an ion.
Lithium stars with the letter L in the periodic table. Other such elements are Lead, Lanthanum, Lutetium, etc.
To know more about lithium, click on the link
https://brainly.com/question/13596853
#SPJ4
How many electrons in an atom can have the following quantum numbers? n = 5, ℓ = 2, mℓ = -2, ms = +½.
The possibility of the presence of maximum number of electrons in an atom with the quantum numbers n = 5, ℓ = 2, mℓ = -2, ms = +½. is 8.
Generally, n is called principal quantum number and it indicates the energy levels or energy shells in an atom.
While m represent the magnetic quantum numbers and it shows the total number of electron which share these quantum numbers.
When n = 5 for an electron, then the value of l can be l = {0; 1 ; 2 ; 3; 4} and the values of magnetic quantum numbers lie between -l and + l.
When m1 = 1 then l can be {1 ; 2 ; 3; 4} and similarly, the spin quantum number can have values between m(s) = { +1/2, -1/2}
To put it simply, electrons with opposite spin share only one orbital and thus there will be total 8 electrons.
n = 5, l = 1, m1 = 1 and ms = ± 1/2
If you need to learn more about quantum numbers click here:
https://brainly.com/question/2292596
#SPJ4
sodium + calcium hydroxide → sodium hydroxide + calcium
pls help i needs to write it as a skeleton equation and balance the equation
The skeletal and balanced version of the equation would be [tex]2Na + Ca(OH)_2 --- > 2NaOH + Ca[/tex]
Symbol equationsThe symbol equation, which was otherwise referred to as skeletal equation in the illustration is an equation that expresses each participating component of a reaction in its symbolic forms.
On the other hand, a balanced equation of a reaction is the equation in which the number of atoms of different elements present in the reactants is equal to the number present in the products. It does not matter if their forms change, however.
Thus, for the equation: sodium + calcium hydroxide → sodium hydroxide + calcium
Symbol of sodium = Na
Symbol of calcium hydroxide = [tex]Ca(OH)_2[/tex]
Symbol of calcium = Ca
The equation then becomes: [tex]2Na + Ca(OH)_2 --- > 2NaOH + Ca[/tex]
The equation has taken into account the number of atoms of different elements in the reactants and the products. It is already a balanced equation.
More on symbol equations can be found here: https://brainly.com/question/11565028
#SPJ1
What is the mass of 5.6 x 10^22 atoms of sulfur?
The mass of sulfur 5.6 × 10²² atoms of sulfur is 2.975 gram
The Avogadro law states that an equal volume of the gases at the same temprature and pressure contain the same number of molecule
1 mole = 6.022×10²³ atm
Then the molar mass of sulfur = 32g/mol
That means 1 mole of sulfur is composed of 32 g weight which contain = 6.022×10²³
If 1 mole of sulfur = 32 g = 6.022×10²³
The mass of sulfur that is contained in 5.6 × 10²² atoms of sulfur is
x = 5.6 × 10²² × 32 g /6.022×10²³
x = 2.975 gram
Therefore we can conclude that the mass of sulfur that would have precisely 5.6 × 10²² atom of sulfur is 2.975 gram
Know more about sulfur
https://brainly.com/question/14209545
#SPJ1
H2Se(g) + 4 O2F2(g) SeF6(g) + 2 HF(g) + 4 O2(g)
30. Which of the following is true regarding the reaction represented above?
(A) The oxidation number of O does not change.
(B) The oxidation number of H changes from −1 to +1.
(C) The oxidation number of F changes from +1 to −1.
(D) The oxidation number of Se changes from −2 to +6.
(E) It is a disproportionation reaction for F.
H2Se(g) + 402F2(g) ⇒SeF6(g) + 2HF(g) + 4O2(g) is true regarding following points ;
B. the oxidation number of H changes from -1 to +1 we can see as in H2Se changes to 2F.
C. the oxidation number of F changes from -1 to +1 we can see in O2F2 to
4O2.
D. the oxidation number of Se changes from -2 to +6 as we can see in H2Se to SeF6.
oxidation number also called oxidation state, is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.
disproportionation reaction is the type of reaction when the compound is converted into 2 oxidation states one of higher and one of lower oxidation state.
learn more about oxidation number here;
https://brainly.com/question/27239694
#SPJ4
think about the materials used to make a car.Some materials are glass,steel,leather, and paint choose any "three" materials for each one describe one property that makes it useful in a car
Steel is used to create the chassis that forms the skeleton of the car and protects it in the event of a crash. The glass is transparent and heat resistant. Paint serves as a protective coating to protect the vehicle from damage.
How are Steel sheets used in cars?Steel can be described as a very hard and strong alloy that has a very high strength-to-weight ratio. All these properties can make it a suitable material for car bodies.
In cars, steel is used to form the underlying chassis or cage beneath the car body that creates the skeleton of the vehicle and protects it in a crash. Door beams, body panels, and roofs are created while auto manufacturing is composed of steel on most cars.
Most of the steel is found in the skeletal car body, generally called the “body in white,” which is the foundation of the rest of the vehicle is created.
The types of steel used such as stainless steel, high-strength steel, high or low carbon, or galvanized steel for body panels. These types of steel can be used in the production of several vehicle and engine components.
Learn more about steel, here:
https://brainly.com/question/23427935
#SPJ2
Select one or more correct answers.
Hakeem is testing the effects of sunlight on samples of soil. Which of these actions would introduce confounding variables into Hakeem’s experiment?
A. He tests a theory that’s already been established.
B. He tests multiple hypotheses at a time.
C. He uses identical specimens when completing multiple trials.
D. He adjusts the independent variable and records the effects.
E. He uses different types of soil in each of his samples.
He tests multiple hypotheses at a time and He uses identical specimens when completing multiple trials.
The two options are correct B,C.
Which four sorts of experiments are there?While experimentation as a whole encompasses this form of research, individual research designs have certain characteristics. The four main design types that are pertinent to user experience design are appropriate in this study, scientific, and developed a semi.
A true experiment is what?Any randomized experiment may occasionally be referred to as a real experiment. In other cases, the phrase "true experiment" is used to refer to any investigations that have at at one continuous dependent variable and at least one free variables that is experimentally changed. When experiments are also used to determine whether a theory-based idea, axiom, or phenomenon is true, they play a crucial role in the evolution of science.
To know more about Experiment visit:
https://brainly.com/question/12192140
#SPJ1