calculate enthalpy change between saturated vapor and superheated steam

The balanced chemical equation for the reaction between phosphoric acid (H3PO4) and strontium hydroxide (Sr(OH)2) is:

2 H3PO4 + 3 Sr(OH)2 → Sr3(PO4)2 + 6 H2O

To determine the mass of precipitate produced when 25.0 mL of 0.750 M strontium hydroxide reacts with 45.0 mL of 0.500 M phosphoric acid, we need to determine which reactant is limiting and use stoichiometry to find the amount of product produced.

First, we can calculate the moles of each reactant:

moles of Sr(OH)2 = (0.750 mol/L) x (0.0250 L) = 0.0188 mol

moles of H3PO4 = (0.500 mol/L) x (0.0450 L) = 0.0225 mol

Since there are more moles of H3PO4 than Sr(OH)2, Sr(OH)2 is the limiting reactant. Using the balanced chemical equation, we can calculate the moles of Sr3(PO4)2 produced:

moles of Sr3(PO4)2 = (0.0188 mol Sr(OH)2) x (1 mol Sr3(PO4)2 / 3 mol Sr(OH)2) = 0.00627 mol

Finally, we can use the molar mass of Sr3(PO4)2 to calculate the mass of precipitate produced:

mass of Sr3(PO4)2 = (0.00627 mol) x (452.12 g/mol) = 2.84 g

Therefore, the mass of precipitate produced is 2.84 g.

To determine the volume of a 1.50 M strontium hydroxide solution required to completely neutralize 50.0 mL of a 0.675 M phosphoric acid solution, we can use stoichiometry and the balanced chemical equation:

2 H3PO4 + 3 Sr(OH)2 → Sr3(PO4)2 + 6 H2O

From the equation, we can see that 2 moles of H3PO4 react with 3 moles of Sr(OH)2, so the mole ratio of H3PO4 to Sr(OH)2 is 2:3.

First, we can calculate the moles of H3PO4 in 50.0 mL of 0.675 M solution:

moles of H3PO4 = (0.675 mol/L) x (0.0500 L) = 0.0338 mol

Using the mole ratio, we can calculate the moles of Sr(OH)2 required to react with all of the H3PO4:

moles of Sr(OH)2 = (0.0338 mol H3PO4) x (3 mol Sr(OH)2 / 2 mol H3PO4) = 0.0507 mol

Finally, we can calculate the volume of 1.50 M Sr(OH)2 required to provide this many moles:

volume of Sr(OH)2 = (0.0507 mol) / (1.50 mol/L) = 0.0338 L or 33.8 mL

Therefore, 33.8 mL of 1.50 M Sr(OH)2 solution is required to completely neutralize 50.0 mL of 0.675 M phosphoric acid solution.

learn more abouT Phosphoric acid  here:

https://brainly.com/question/30459610

#SPJ4

There are 1.987 x 10²² atoms are present in 6.27g of F₂

To determine the number of atoms  in 6.27 g of F₂, we'll use the following steps:

1. Convert grams of F₂ to moles using the molar mass of F₂.
2. Determine the number of F atoms in a mole of F₂.
3. Calculate the total number of F atoms using Avogadro's number.

Step 1: The molar mass of F2 is 2 × 19 g/mol (since there are two F atoms, and each F atom has a molar mass of 19 g/mol). So, 6.27 g of F₂ × (1 mol F2 / 38 g F₂) = 0.165 moles of F₂.

Step 2: In one mole of F₂, there are two moles of F atoms (since each F₂ molecule contains two F atoms).

Step 3: Calculate the total number of F atoms using Avogadro's number. 0.165 moles of F × 2 moles of F atoms/mol F₂× (6.02 × 10²³ atoms/mol) = 1.987 × 10²³F atoms.

Since you want the non-exponential part of the value, the answer is 1.987 x 10²² atoms in 6.27 g of F₂.

To learn more about avogadro's number https://brainly.com/question/859564

#SPJ11

The relationship between the chemical potentials (µ) of species A in the liquid phase and the gas phase, with species B as a non-volatile solute, when the liquid phase of A is in equilibrium with the gas phase of is c. µ(A gas) = µ(A liquid).

The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. When the system is at equilibrium, the chemical potentials of species A in the liquid and gas phases are equal. So the correct answer is:c. µ(A gas) = µ(A liquid).

Learn more about chemical potentials energy : https://brainly.com/question/19291483

#SPJ11

The pH can be determined using the nitrous acid Ka expression before any NaOH is added: pH = pKa + log([HNO2]/[NO2-]). HNO2 is initially present at a concentration of 0.348 M without NaOH.

The moles of NaOH added after the addition of 18.0 mL of NaOH can be computed using the formula (0.348 M) x (0.018 L) = 0.00626 mol. The moles of HNO2 that have reacted are also 0.00626 mol since the reaction between HNO2 and NaOH is a 1:1 reaction. With respect to HNO2, the remaining moles are (0.348 mol) - (0.00626 mol) = 0.34174 mol. (74.5 mL + 18.0 mL) = 92.5 mL is the remaining capacity. pH is calculated using the Henderson-Hasselbalch equation, where [HNO2] is defined as 0.34174 mol/0.0925 L3.69 M and [NO2-] as 0.00626 mol/0.018 L0.348 M. So, pH is equal to 3.35 plus log(3.69/0.348) 3.98. Half of the original moles of HNO2 had interacted with NaOH at the point of half-equivalence. When the volume of additional NaOH supplied is equivalent to half the volume of the first solution of HNO2. HNO2 has a starting mole of (0.348 M) x (0.0745 L) = 0.02597 mol. This half has 0.012985 mol. 0.012985 mol of NaOH are also required to get to this point.

learn more about nitrous acid here:

https://brainly.com/question/17055219

#SPJ11

The heat gained by copper when 51.8 g of copper is warmed from 15.5°C to 76.4°C is 1,090.97 J.

To calculate the heat gained, you can use the formula q = mcΔT, where q is the heat gained, m is the mass of copper, c is the specific heat of copper, and ΔT is the change in temperature.

1. Determine the mass (m): 51.8 g
2. Identify the specific heat (c): 0.385 J/(g·°C)
3. Calculate the change in temperature (ΔT): 76.4°C - 15.5°C = 60.9°C
4. Plug the values into the formula: q = (51.8 g) x (0.385 J/(g·°C)) x (60.9°C)
5. Calculate the heat gained (q): 1,090.97 J

To know more about specific heat click on below link:

https://brainly.com/question/11297584#

#SPJ11

The cosmic ray involved in the decay process of Nitrogen-15 to form Carbon is a high-energy proton. , Carbon-14 gets locked in organic material through the process of photosynthesis,

where plants take in carbon dioxide from the atmosphere, including the Carbon-14 isotope, and incorporate it into their tissues. Animals then eat the plants, incorporating Carbon-14 into their own tissues.

Carbon has a half-life of approximately 5,700 years. To determine how many half-lives are needed to leave behind approximately 1/8 of the original mass, we can use the formula:

N = (1/2)^n * N0

where N is the final mass, N0 is the initial mass, and n is the number of half-lives.

Setting N = 1/8 and N0 = 1, we get:

1/8 = (1/2)^n

Taking the logarithm of both sides, we get:

n = log(1/8) / log(1/2) = 3

Therefore, it would take three half-lives of Carbon-14 decay to leave behind approximately 1/8 of the original mass.

The equation for radioactive decay is given by:

N(t) = N0 * e^(-kt)

where N(t) is the amount of radioactive substance remaining at time t, N0 is the initial amount, k is the decay constant, and e is the base of the natural logarithm.

The half-life of the substance is related to the decay constant by the equation:

k = ln(2) / t1/2

where t1/2 is the half-life.

Substituting the given values, we get:

k = ln(2) / 24500 = 2.83 x 10^-5 / year

To find the time it takes for the substance to decay to 0.8 grams, we can use the equation:

0.8 = 1 * e^(-2.83 x 10^-5 t)

Taking the natural logarithm of both sides, we get:

ln(0.8) = -2.83 x 10^-5 t

Solving for t, we get:

t = -ln(0.8) / 2.83 x 10^-5 = 11,848 years

Therefore, it would take approximately 11,848 years for one gram of radioactive substance with a half-life of 24,500 years to decay to 0.8 grams.

Learn more about  Carbon   here:

https://brainly.com/question/14272000

#SPJ11

When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.

To calculate the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:

moles of CO₂ = mass of dry ice / molar mass of CO₂

moles of CO₂ = 500.0 g / 44.0 g/mol

moles of CO₂ = 11.36 mol

Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.

Next, we can plug in the values we know into the ideal gas law:

PV = nRT

V = nRT / P

where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).

Converting the temperature to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Plugging in the values:

V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)

V = 439.4 L

Therefore, the volume of gas produced is approximately 439.4 L.

When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.

To calculate the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:

moles of CO₂ = mass of dry ice / molar mass of CO₂

moles of CO₂ = 500.0 g / 44.0 g/mol

moles of CO₂ = 11.36 mol

Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.

Next, we can plug in the values we know into the ideal gas law:

PV = nRT

V = nRT / P

where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).

Converting the temperature to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Plugging in the values:

V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)

V = 439.4 L

Therefore, the volume of gas produced is approximately 439.4 L.

Learn more about temperature on:

https://brainly.com/question/7510619

#SPJ6

The value of ΔSuniv is the change in entropy of the universe, which is a measure of the degree of disorder or randomness that occurs during a chemical or physical process. So ΔSuniv = -127 J/K

The calculation of ΔSuniv involves using the equation ΔSuniv = ΔSsys - (ΔHsys / T), where ΔSsys is the change in entropy of the system and ΔHsys is the change in enthalpy of the given system. Plugging in the given values and converting ΔH∘rxn to J gives

The negative value of ΔSuniv indicates that the process is not spontaneous at the given temperature and pressure.  Conversely, a negative value of ΔSuniv indicates that a process decreases the degree of disorder in the universe, which means that it is non-spontaneous under the given conditions.

Learn More about entropy

https://brainly.com/question/6364271

#SPJ4

The molecules of [tex]C_{2}H_{6}[/tex] required to react with 5.6 mol of [tex]O_{2}[/tex] is [tex]9.6*10^{23}[/tex]. This is obtained when Avogadro's number is considered.

Here the balanced chemical reaction is [tex]2C_{2}H_{6} +7O_{2} +4CO_{2} +6H_{2}O > > > > 4CO_{2} + 6H_{2}O[/tex]

Here, 7 moles of [tex]O_{2}[/tex] reacts with 2 moles of [tex]C_{2}H_{6}[/tex], if we start with 5.6 mol of [tex]O_{2}[/tex] we get

[tex]\frac{5.6*2}{7}[/tex]

= 1.6 moles

To find the molecules multiply this with Avogadro's number we get

[tex]9.6*10^{23}[/tex]

The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is known as the Avogadro constant, also known as NA or L. [tex]6.02214076*10^{23}[/tex]reciprocal moles is the precise value of this SI defining constant.

Avogadro's number can be multiplied or divided to convert between molecules and moles: Adding [tex]6.02214076*10^{23}[/tex]to the number of moles will convert it to molecules. Divide the number of molecules by [tex]6.02214076*10^{23}[/tex] in order to convert that number to moles.

For more information on Avogadro's number kindly visit to

https://brainly.com/question/11907018

#SPJ1

The volume in milliliters of 0.7513 M NaOH standard solution needed to neutralize 50.00 ml of 0.3442 M tartaric acid is 45.8 mL.

To solve this problem, we need to use the equation for molarity:

Molarity (M) = moles (mol) / volume (L)

First, let's calculate the moles of tartaric acid in 50.00 ml of 0.3442 M solution:

mol tartaric acid = Molarity x Volume = 0.3442 mol/L x 0.05000 L = 0.01721 mol

Since the mole ratio from the balanced chemical equation for the reaction between tartaric acid and NaOH is 1:2, we know that we will need twice as many moles of NaOH to neutralize the tartaric acid. Therefore, we need:

mol NaOH = 2 x mol tartaric acid = 2 x 0.01721 mol = 0.03442 mol

Now we can use the molarity of the NaOH solution to calculate the volume of solution we need:

Molarity (NaOH) = moles (NaOH) / volume (NaOH)

0.7513 mol/L = 0.03442 mol / volume (NaOH)

volume (NaOH) = 0.03442 mol / 0.7513 mol/L = 0.0458 L

Finally, we need to convert liters to milliliters:

volume (NaOH) = 0.0458 L x 1000 mL/L = 45.8 mL

Therefore, we need 45.8 mL of 0.7513 M NaOH solution to neutralize 50.00 mL of 0.3442 M tartaric acid.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The volume in milliliters of 0.7513 M NaOH standard solution needed to neutralize 50.00 ml of 0.3442 M tartaric acid is 45.8 mL.

To solve this problem, we need to use the equation for molarity:

Molarity (M) = moles (mol) / volume (L)

First, let's calculate the moles of tartaric acid in 50.00 ml of 0.3442 M solution:

mol tartaric acid = Molarity x Volume = 0.3442 mol/L x 0.05000 L = 0.01721 mol

Since the mole ratio from the balanced chemical equation for the reaction between tartaric acid and NaOH is 1:2, we know that we will need twice as many moles of NaOH to neutralize the tartaric acid. Therefore, we need:

mol NaOH = 2 x mol tartaric acid = 2 x 0.01721 mol = 0.03442 mol

Now we can use the molarity of the NaOH solution to calculate the volume of solution we need:

Molarity (NaOH) = moles (NaOH) / volume (NaOH)

0.7513 mol/L = 0.03442 mol / volume (NaOH)

volume (NaOH) = 0.03442 mol / 0.7513 mol/L = 0.0458 L

Finally, we need to convert liters to milliliters:

volume (NaOH) = 0.0458 L x 1000 mL/L = 45.8 mL

Therefore, we need 45.8 mL of 0.7513 M NaOH solution to neutralize 50.00 mL of 0.3442 M tartaric acid.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The correct IUPAC name for the given compound is 2-tert-butyl-3-chlorophenol.

The compound has a phenol ring substituted with a tert-butyl group at the second carbon atom and a chlorine atom at the third carbon atom.

According to the IUPAC nomenclature rules, we should first number the carbon atoms on the ring so that the substituents have the lowest possible locants. Since the tert-butyl group is at the second carbon atom and the chlorine atom is at the third carbon atom, we number the ring in such a way that the tert-butyl group gets the lower locant, and the chlorine atom gets the higher locant.

Thus, the compound is named as 2-tert-butyl-3-chlorophenol.

Click the below link, to learn more about IUPAC Nomenclature:

https://brainly.com/question/14379357

#SPJ11

(a) The molar mass of Li2CO3 can be calculated by adding the atomic masses of 2 Li atoms, 1 C atom, and 3 O atoms:

Molar mass of Li2CO3 = 2(6.941 g/mol) + 1(12.011 g/mol) + 3(15.999 g/mol) = 73.89 g/mol

Therefore, the molar mass of Li2CO3 is 73.89 g/mol.

(b) The molar mass of KNO3 can be calculated by adding the atomic masses of 1 K atom, 1 N atom, and 3 O atoms:

Molar mass of KNO3 = 1(39.0983 g/mol) + 1(14.0067 g/mol) + 3(15.999 g/mol) = 101.103 g/mol

Therefore, the molar mass of KNO3 is 101.103 g/mol.

(c) The molar mass of Mg3N2 can be calculated by adding the atomic masses of 3 Mg atoms and 2 N atoms:

Molar mass of Mg3N2 = 3(24.305 g/mol) + 2(14.007 g/mol) = 100.949 g/mol

Therefore, the molar mass of Mg3N2 is 100.949 g/mol.

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

The obtained negative δs° sign in question 3b is consistent with the expected behavior of salt dissolution in water, which is an exothermic process releasing energy due to the hydration of ions by water molecules.

Yes, the sign of δs° obtained in question 3b is consistent with the expectations of dissolving a salt in water. When a salt dissolves in water, the process is exothermic, meaning it releases heat into the surrounding environment. This is because the salt ions are surrounded by water molecules, which form hydration shells around the ions and release energy as they do so. This release of energy results in a negative value for δs°, which is exactly what was obtained in question 3b. Therefore, the sign of δs° is consistent with the expected behavior of salt dissolution in water.

learn more about exothermic process here:

https://brainly.com/question/29866491

#SPJ11

The mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

To determine the mole fraction of each gas in the mixture of N2 and Xe, we need to use the ideal gas law equation: PV = nRT.

At STP, P = 1 atm and T = 273 K. The density of the mixture is 1.562 g/L, which can be converted to g/mL by dividing by 1000.

So, the density of the mixture is 0.001562 g/mL. We can use this value to calculate the molar concentration (M) of the mixture as follows:

M = density / molar mass

The molar mass of the mixture can be calculated as the weighted average of the molar masses of N2 and Xe, based on their mole fractions.

Let x be the mole fraction of N2 and (1-x) be the mole fraction of Xe. Then, the molar mass of the mixture is:

Mmixture = x*M(N2) + (1-x)*M(Xe)

where M(N2) = 28 g/mol and M(Xe) = 131.29 g/mol.

Substituting the values, we get:

0.001562 g/mL / Mmixture = x*28 g/mol + (1-x)*131.29 g/mol

Solving for x, we get:

x = 0.982

So, the mole fraction of N2 in the mixture is 0.982, and the mole fraction of Xe is 0.018.

Learn more about fraction here:

https://brainly.com/question/8482939

#SPJ11

The angular speed of the stone is 3π rad/s (since 15 revolutions = 30π radians, and it takes 10 seconds to complete those revolutions). The linear speed of the stone is 90π/10 ft/s = 9π ft/s (since the distance traveled by the stone in 10 seconds is 90π feet).

In this problem, we are asked to find the angular and linear velocities of a stone that is being rotated in a sling. We are given that the sling is 3 feet long and that the stone completes 15 revolutions in 10 seconds. To find the angular velocity, we use the formula: angular speed = change in angle/time. Since the stone completes 15 revolutions, the change in angle is 152pi radians. Dividing by time, we get an angular speed of 3*pi radians per second.

To find the linear velocity, we need to find the distance traveled by the stone in 10 seconds. Since the sling is 3 feet long, the stone travels a distance of 2pi3 feet for every revolution. Multiplying by the number of revolutions in 10 seconds, we get a distance of 90 pi feet. Dividing by the time, we get a linear velocity of 9pi feet per second.

Therefore, the angular velocity of the stone is 3pi radians per second and the linear velocity is 9pi feet per second.

learn more about velocities here:

https://brainly.com/question/28710636

#SPJ11

The correct answer is E) N has a half-filled subshell, which makes it harder for nitrogen to gain an additional electron and results in a less exothermic electron affinity compared to carbon.

The electron affinity is defined as the energy change that occurs when an atom gains an electron in the gas phase. The electron affinity of an atom depends on various factors, such as the electron configuration, atomic size, and nuclear charge.

In the case of C and N, both elements belong to the same period of the periodic table and have the same valence electron configuration (2s22p2). However, nitrogen has one more electron in its atomic structure compared to carbon.

When nitrogen gains an additional electron to form the N- ion, this electron occupies the 2p subshell, which is already half-filled. As a result, there is a strong repulsion between the added electron and the electrons already present in the 2p subshell, making it more difficult for the nitrogen atom to gain an electron. This makes nitrogen's electron affinity less exothermic than carbon.

On the other hand, when carbon gains an electron to form the C- ion, the added electron goes into the 2p subshell, which is not half-filled. As a result, there is less repulsion between the added electron and the electrons already present in the 2p subshell, making it easier for the carbon atom to gain an electron. This makes carbon's electron affinity more exothermic than nitrogen.

learn more about electron affinity here:

https://brainly.com/question/977718

#SPJ11

The basic hydrolysis of a nitrile yields an amide and then a carboxylic acid salt plus ammonia or an amine.

The first product formed is an amide from the hydrolysis of nitrile. The amide is formed as an intermediate product, and it can be further hydrolyzed under basic conditions to form a carboxylic acid salt (or carboxylate) and either ammonia (NH₃) or an amine (R-NH₂). The final products of the reaction depend on the conditions used and the nature of the nitrile substrate.

The overall reaction can be represented as follows:

R-CN + 2H₂O + OH- → R-COONa + NH₃ (or R-NH₂)

where R is an organic group attached to the nitrile functional group (-CN).

Learn more about hydrolysis here:

https://brainly.com/question/24244589

#SPJ11

4. Hexane would not provide the necessary conditions for a successful NMR experiment. 5. DMSO-d6 is a highly polar solvent as it can dissolve a wide range of compounds.

Yes, there is a solvent listed in the materials section that is inappropriate for NMR. The solvent is hexane. Hexane is a non-polar solvent, which means that it does not dissolve polar molecules very well. Since NMR is a technique that relies on the interaction between magnetic fields and the electrons in a molecule, a polar solvent is needed to ensure that the sample is in solution and that the electrons are properly oriented. Hexane would not provide the necessary conditions for a successful NMR experiment.
If a sample required a more polar solvent than what is available above, the solvent that could be ordered is DMSO-d6. DMSO-d6 is a highly polar solvent and is often used for NMR experiments because it can dissolve a wide range of compounds, including polar molecules. Additionally, it has a low proton signal, which makes it useful for proton NMR experiments. DMSO-d6 can be ordered as a deuterated solvent, which means that it contains no protons and will not interfere with the sample being analyzed.

To know more about solvent please refer: https://brainly.com/question/30885015

#SPJ11

4. Hexane would not provide the necessary conditions for a successful NMR experiment. 5. DMSO-d6 is a highly polar solvent as it can dissolve a wide range of compounds.

Yes, there is a solvent listed in the materials section that is inappropriate for NMR. The solvent is hexane. Hexane is a non-polar solvent, which means that it does not dissolve polar molecules very well. Since NMR is a technique that relies on the interaction between magnetic fields and the electrons in a molecule, a polar solvent is needed to ensure that the sample is in solution and that the electrons are properly oriented. Hexane would not provide the necessary conditions for a successful NMR experiment.
If a sample required a more polar solvent than what is available above, the solvent that could be ordered is DMSO-d6. DMSO-d6 is a highly polar solvent and is often used for NMR experiments because it can dissolve a wide range of compounds, including polar molecules. Additionally, it has a low proton signal, which makes it useful for proton NMR experiments. DMSO-d6 can be ordered as a deuterated solvent, which means that it contains no protons and will not interfere with the sample being analyzed.

To know more about solvent please refer: https://brainly.com/question/30885015

#SPJ11

Out of the given salts, pbcl2 and ni(oh)2 will be more soluble in an acidic solution than in pure water. This is because they are insoluble in pure water but can form soluble complexes with hydrogen ions in an acidic solution.

The other salts, baso3, caso4, and csclo4, are already soluble in pure water and their solubility will not be significantly affected by the presence of acid. Salts that will be more soluble in an acidic solution than in pure water are those that react with the acidic protons (H+) to form a more soluble product. In the given list, BaSO3 (barium sulfite) and PbCl2 (lead(II) chloride) will be more soluble in an acidic solution because the acidic protons react with the sulfite and chloride ions, respectively, forming more soluble products.

Learn more about Salts here: brainly.com/question/16446935

#SPJ11

ΔHrm for the given reaction can be calculated as follows: [tex]ΔHrm = ΣnΔHf(products) - ΣnΔHf(reactants)[/tex] , [tex]ΔHrm = [2(-393.5) + 2(-241.8)] - [-1411 + (-285.8)][/tex],

[tex]ΔHrm = -136.4 kJ/mole[/tex]

The negative value of ΔHrm indicates that the reaction is exothermic, which means that energy is released by the system during the reaction.

The amount of heat transferred between the system and surroundings can be calculated using the equation:

[tex]q = ΔHrxn × n[/tex]

[tex]q = (-136.4 kJ/mole) × (3.5 moles)[/tex]

[tex]q = -477.4 kJ[/tex]

Therefore, the system releases 477.4 kJ of heat to the surroundings during the reaction.

learn more about reaction here:

https://brainly.com/question/28984750

#SPJ11

The amount of carbon dioxide produced from the combustion of a candle formula depends on the specific formula and the mass of the candle. However, on average, the combustion of one gram of wax in a candle produces approximately 3 grams of carbon dioxide.

Most candles are made of paraffin wax, which is a hydrocarbon with the general formula CnH2n+2. Let's assume that we are dealing with a simple hydrocarbon, such as C25H52 (a common component of paraffin wax).

During combustion, the hydrocarbon reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). The balanced chemical equation for the combustion of C25H52 is:

C25H52 + 38O2 → 25CO2 + 26H2O

To find the grams of CO2 produced, we need to know the mass of C25H52 that is combusted. For example, let's say we have 1 mole of C25H52 (molecular weight = 25*12.01 + 52*1.01 = 352.76 g/mol).

From the balanced equation, 1 mole of C25H52 produces 25 moles of CO2. The molecular weight of CO2 is 12.01 (C) + 2*16.00 (O) = 44.01 g/mol. So, the mass of CO2 produced from 1 mole of C25H52 is:

25 moles CO2 * 44.01 g/mol = 1100.25 grams of CO2

So, in this example, the combustion of 1 mole (352.76 grams) of C25H52 from a candle produces 1100.25 grams of carbon dioxide.

Learn more about combustion at: brainly.com/question/15117038

#SPJ11

The statement "When a base is dissolved in water, the lowest possible pH of the solution is 7.0" is false; the statement "When an acid is dissolved in water, the lowest possible pH is 0" is true; the statement "A strong acid solution will have a lower pH than a weak acid solution" is true; and, the statement "A 0.0010-M Ba(OH)2 solution has a pOH that is twice the pOH value of a 0.0010-M KOH solution" is false.

a. False. Correction: When a base is dissolved in water, the pH of the solution is greater than 7.0.

b. True. If an acid is dissolved in H20, then the lowest pH possible is 0.

c. True. When two solutions, one being a strong acid solution and the other being a weak acid solution are compared, the pH of the strong acid will be lower than the pH of the strong acid.

d. False. Correction: A 0.0010-M Ba(OH)2 solution has a pOH that is half the pOH value of a 0.0010-M KOH solution, because Ba(OH)2 is a strong base and releases two hydroxide ions per molecule, while KOH is a strong base that releases one hydroxide ion per molecule.

To learn more about an acid and base, visit: https://brainly.com/question/13646534

#SPJ11

Answer:

When the vessel contracts, the equilibrium will shift towards the side with fewer moles of gas, which is the right side in this case.

The arrangement oxides in each of the following groups of increasing basicity: (a) Al2O3 < SrO < Na2O. and (b)  CrO3 < CrO < Cr2O3.

First, we need to consider their positions in the periodic table and their metallic or non-metallic character and in general, basicity increases with increasing metallic character.  (a) Na2O, Al2O3, SrO: These oxides belong to Group 1 (Na), Group 2 (Sr), and Group 13 (Al) in the periodic table. Na2O is the most basic oxide due to sodium's high metallic character as a Group 1 element  and SrO, from Group 2, is less basic than Na2O but still exhibits basic behavior.  Al2O3, an amphoteric oxide from Group 13, is the least basic in this group, so, the order of increasing basicity for these oxides is Al2O3 < SrO < Na2O.

(b) CrO3, CrO, Cr2O3: These oxides are chromium compounds in different oxidation states, CrO3, a chromium(VI) oxide, has high oxidation state and is acidic. CrO, a chromium(II) oxide, is amphoteric, showing both acidic and basic properties. Cr2O3, a chromium(III) oxide, is basic but less basic compared to typical metallic oxides. The order of increasing basicity for these oxides is CrO3 < CrO < Cr2O3.

Learn more about periodic table at:

https://brainly.com/question/15987580

#SPJ11

When 0.950 g of KHT is dissolved in 25.00 ml of water, its molar solubility (measured in mol/l) is 0.202 mol/L.

Molar solubility is the number of moles of a solute that can dissolve in a solvent before the solvent reaches saturation.

To calculate the molar solubility of KHT (potassium hydrogen tartrate), we need to first find the number of moles of KHT present in 0.950 g.

The molar mass of KHT is 188.18 g/mol (39.10 g/mol for potassium + 133.08 g/mol for hydrogen tartrate).

Using the formula:

moles = mass/molar mass

We can calculate the moles of KHT as:

moles = 0.950 g / 188.18 g/mol = 0.00505 moles

Now, we need to find the volume of the solution in liters.

25.00 ml is equal to 0.025 L.

Finally, we can use the formula for molar solubility:

molar solubility = moles of solute/volume of solution in liters

molar solubility = 0.00505 moles / 0.025 L = 0.202 M

Therefore, the molar solubility of KHT in this solution is 0.202 mol/L.

Learn more about molar solubility: https://brainly.com/question/28566275

#SPJ11

Answer:

P5S4

Explanation:

Penta means 5 and tetra means 4, therefore P5S4

Answer:

To calculate the volume of oxygen required to burn hydrogen, we need to use the balanced chemical equation for the combustion of hydrogen with oxygen which is

2H2(g) + O2(g) → 2H2O(g)

Two moles of hydrogen gas combine with one mole of oxygen gas to form two moles of water vapour, according to this equation. The coefficients in the equation provide information on the mole ratios of the reactants and products.

To determine the volume of oxygen necessary, we must first convert the problem's circumstances to standard temperature and pressure (STP), which are 0 degrees Celsius and 101.3 kPa. This conversion may be accomplished using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Next step is to convert the temperature of -50 degrees Celsius to Kelvin:

T = (−50 + 273.15) K = 223.15 K

Now we can use the ideal gas law to calculate the number of moles of hydrogen required for the reaction:

n(H2) = PV/RT = (50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)

where we have used the units of the gas constant R in Joules per mole Kelvin (J/(mol·K)).

The stoichiometry of the balanced chemical equation may then be used to calculate the amount of moles of oxygen required for the reaction. Because the hydrogen-to-oxygen ratio is 2:1, we require half as many moles of oxygen as hydrogen:

n(O2) = n(H2)/2

Finally, we can use the ideal gas law again to calculate the volume of oxygen required at STP:

n(O2) = PV/RT = (101.3 kPa)(V)/(8.314 J/(mol·K))(273.15 K)

Now we can substitute the expression for n(O2) in terms of n(H2) into the equation for V(O2) and solve for V(O2):

V(O2) = n(O2)RT/P = [(50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)](8.314 J/(mol·K))(273.15 K)/(101.3 kPa)

Simplifying this expression and solving for V(O2), we get:

V(O2) = (V/2) * (101.3/50) * (273.15/223.15) = 3.07 V

As a result, at -50 degrees Celsius and 50 kPa, the volume of oxygen required to burn a given volume of hydrogen in space is 3.07 times the volume of hydrogen. It should be noted that the volume units will be determined by the initial volume supplied for hydrogen in the problem.

(im so sorry if its wrong)

The first step is to determine the number of moles of aluminum present in the sample:

moles of Al = mass of Al / molar mass of Al

moles of Al = 1000 g / 26.98 g/mol

moles of Al = 37.05 mol

Next, we can calculate the energy that must be removed as heat:

ΔH = nCΔT

ΔH = (37.05 mol) x (24.35 J/K mol) x (300 K - 250 K)

ΔH = -44,022.75 J

So the energy that must be removed as heat is -44,022.75 J.

Finally, we can calculate the change in entropy of the sample using the formula:

ΔS = nCln(T2/T1)

ΔS = (37.05 mol) x (24.35 J/K mol) ln(250 K/300 K)

ΔS = -37.39 J/K

So the change in entropy of the sample is -37.39 J/K.

Visit here to learn more about molar mass brainly.com/question/22997914

#SPJ11

The entropy change (δso) at 201 K is -0.015 J/K.

To calculate δso at 201 K in J/K, we can use the following equation:

δgo = δho - Tδso

Where δho is the enthalpy change, δgo is the Gibbs free energy change, T is the temperature in Kelvin, and δso is the entropy change.

Substituting the given values, we get:

-162. kj = -159. kj - (201 K)δso

Solving for δso, we get:

δso = (-162. kj + 159. kj) / (201 K)

δso = -0.015 J/K

Therefore, the entropy change (δso) at 201 K is -0.015 J/K.

Learn more about δgo at https://brainly.com/question/9179942

#SPJ11