Scientific Notation!!!!!
#9 b) PLEASE HELP!!!
Explanation:
9) a) (9.84×10³)/(6.12×4.27×10³+⁷) = 9.84×10³/6.12×4.27×10¹⁰ = 9.84×10³-¹⁰/6.12×4.27
= 0.376×10^-7.
b) (4.36×10⁸×1.82×10³)/(0.0856×4.7×10⁶)
= (7.9352×10⁸+³)/(0.40232×10⁶)
= 19.72×10⁸+³-⁶ = 19.72×10⁵
hope this helps you.
An atom contains three protons, two neutrons, and one electron. What is the charge of the nucleus?
A: 3+
B: 5+
C: 2+
D: 0
Answer:
A.3+
Explanation:
️️️️️️️️️️️️️️
Acetylene (C2H2) gas and oxygen (02) gas react to form carbon dioxide (CO2) gas and water (H20) vapor. Suppose you have 2.0 mol of C,H, and 1.0 mol
of o, in a reactor
Calculate the largest amount of CO, that could be produced. Round your answer to the nearest 0.1 mol.
The largest amount of CO₂ produced when 2 moles of C₂H₂ reacted with 1 mole of O₂ is 0.8 mole
We'll begin by writing the balanced equation for the reaction. This is given below:
2C₂H₂ + 5O₂ —> 4CO₂ + 2H₂O
2 : 5
2 : 1
From the balanced equation above,
We can see that O₂ is the limiting reactant as lesser amount of it is available.
Finally, we shall determine the largest amount of CO₂ produced by using the limiting reactant as illustrated below:
From the balanced equation above,
5 moles of O₂ reacted to produce 4 moles of CO₂.
Therefore,
1 mole of O₂ will react to produce = 4/5 = 0.8 mole of CO₂.
Thus, the largest amount of CO₂ produced from the reaction is 0.8 mole
Learn more: https://brainly.com/question/25299182
5. A student measures the mass of an object three times on a balance in order to calculate the objects
density. The recorded masses are 70.21 g, 64.55 g, and 74.70 g. The accepted value for the mass of
the object is 70.21 g.
a. Are these measurements accurate? Why or why not?
b. Are the measurements precise? Why or why not?
Answer:
This is not chemistry this is physics
The RDI for sodium for adults is 2300mg. What amount of table salt (in grams) contains this quantity of sodium? Express answer to two significant figures and include the appropriate units.
Answer:
hihihihhihihihihiihihihihiihihihih
A sample of gas at 1.0°C is expanded at constant pressure from 10 L to 15 L. The final temperature is:
a: 1.50 °C
b: 411 °C
c: None of all
d:138 °C
e: 183 °C
Answer:
y
Explanation:
yea Mami you know like for real I feel you you know iam seeing but tomorrow I see the equation for the last works positive AAAAA
What is condensation
If a aluminum cube had a mass of 20g and the length of each side was 2cm between what to liquids would it float?
Answer:
density=20/8 g/cc=2.5 g/cc
Mercury is more dense, so aluminum will float on it. Water is less dense, so the aluminum will be below water.
Aluminum will float atop mercury because it is more dense than it. Due to water's lower density, the metal will lie below the surface.
What is density?Density is defined as the measure of how densely a material is packed together.
It can also be defined as the mass of a solid substance per unit volume.
Density is important because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. As long as an object's density is lower than the liquid's density, it will often float.
The term "density" refers to the relationship between a substance's mass and the volume it takes up in space. The mass, size, and arrangement of an object's atoms influence its density.
Density can be expressed as
Density = mass / volume
There are two types of density.
Absolute densityRelative densityThus, aluminum will float atop mercury because it is more dense than it. Due to water's lower density, the metal will lie below the surface.
To learn more about density, refer to the link below:
https://brainly.com/question/15164682
#SPJ2
Na is best known as a(n):
Answer:
sodium
Explanation:
sodium is an element with the atomic no. of 11 and atomic mass of approximately 23
How did max planck contribute to the modern atomic theory?
Answer:
Planck made many contributions to theoretical physics, but his fame rests primarily on his role as originator of the quantum theory. This theory revolutionized our understanding of atomic and subatomic processes, just as Albert Einstein's theory of relativity revolutionized our understanding of space and time
Answer:
revolutionized our understanding of atomic and subatomic processed
What energy keeps the water cycle going?
Answer:
the the that keeps the water cycle going is heat
How many unpaired electrons does fluorine have in its ground state electron configuration?
Answer:
1 unpaired electron (s)
Explanation:
<
Time's Up!
Submit
Balance the following chemical equation (if necessary):
Rb(s) + RbNO3(s) → Rb2O(s) + N2(g)
3C,
2-
Reset
OS
< >
1
3
4
2.
5
07
6
7
8.
9
o
Answer:
im sorry but what is it post to be
Explanation:
Are the atoms really "sharing" electrons? Explain.
Answer:
yes, in certain cases
there are different types of bondings between atoms
and in some they lend electrons to make their atom stable this type of bonding is called ionic bonding
and in covalent bond the atoms share their electrons
How many moles are present in a sample of HCI with a mass of with a mass of 3.65g?
Answer:
number of moles = 0.1001 mol
Explanation:
number of moles = mass/molar mass
number of moles = 3.65g / 36.459 g/mol
n = 0.1001 mol
Colligative properties are dependent only on the number of particles in a solution, and not their identity. (select all that apply) Select one or more: a. Acidity b. Depression of freezing point c. Lowering of vapor pressure d. Osmotic pressure e. Elevation of boiling point f. Mortality g. Value h. Molarity
These colligative properties include reduced vapor pressure, increased boiling point, decreased freezing point, and increased osmotic pressure.
What do you mean by osmotic pressure?When a semipermeable membrane separates a solution from pure water, osmotic pressure is defined as the pressure that must be applied to the solution side to stop fluid movement.These colligative properties include reduced vapor pressure, increased boiling point, decreased freezing point, and increased osmotic pressure. As described in this module, this small set of properties is critical to many natural phenomena and technological applications.The pressure required to prevent water from diffusing through a membrane via osmosis is known as osmotic pressure. The concentration of the solute determines it. Water diffuses from the lower concentration area to the higher concentration area.Osmotic pressure is a 'colligative' property, like freezing point depression, which means that it depends on the number of particles in solution but not on their chemical identity.To learn more about : Osmotic pressure
Ref : https://brainly.com/question/14208018
#SPJ2
Why do you think dark surfaces absorb radiation better than light surfaces?
Your answer→ The lighter side absorbs less of the incident light, reflecting some of the energy. Darker materials also emit radiation more readily than light-colored materials, so they cool faster.
To solve this we must be knowing each and every concept related to radiation. Therefore, dark surfaces absorb radiation better than light surfaces as dark surfaces absorbs light of all wavelengths.
What is radiation?According to the energy of the emitted particles, radiation is frequently classified as being either ionizing or non-ionizing. More than 10 eV is often carried by ionizing radiation, which is sufficient to ionize atoms as well as molecules and rupture chemical bonds.
The word refers to radiation having an energy level high enough to ionize atoms, or to remove electrons from atoms to produce ions. Whenever an electron is removed from an atom's electron shell, or, as we may say, when it is "tried to knock out," the action of ionization takes place. Dark surfaces absorb radiation better than light surfaces as dark surfaces absorbs light of all wavelengths.
Therefore, dark surfaces absorb radiation better than light surfaces as dark surfaces absorbs light of all wavelengths.
To know more about radiation
https://brainly.com/question/13163856
#SPJ2
helpppppppppppppppppppppppppppppppppp
Answer:
the drops of liquid are coming from the decreases. they are formed as the motion of the water particles in the air gas. this change in motion cause air in the air to change from a liquid to a water
Hello there!
The drops of liquid are coming from the air. They are formed as the motion of particles in the air decreases. This change in motion causes water in the air to change from a liquid to a gas.
Hope this helps you!
~Just a joyful teen
[tex]SilentNature :)[/tex]
✿❀❁❀✿In order for a light bulb to be turned on in a circuit, it must have what kind of switch?
Answer:
Both switches must be closed in order for the circuit to be complete and for the bulb to light. (This would indicate the 'armed' status of this burglar alarm.) Magnetic switches come in 2 varieties - "Normally Closed" and "Normally Open". These 2 terms describe the state of the switch when it is NOT being controlled by the magnet.
Explanation:
50 Points (Brainliest too)! Please help!
1. In detail, explain what transmutation is.
2. In one to two sentences, explain what an alpha particle is.
3. Explain the difference between a chemical equation and a nuclear equation.
4. What is the relationship between the atomic number and the mass number of a 5. nucleus?
Please help me understand these!! I'm really confused!
Answer:
Transmutation is the conversion of an atom of one element into an atom of a different element through nuclear changes.
An alpha particle is a particle composed of 2 protons and 3 neutrons. It results from transmutation because of the change in protons in a large nucleus.
A chemical equation is balanced accord to the number of atoms of each element before and after the change. This is also shows the Law of Conservation of Matter.
A nuclear equation is balanced according to mass number and charge (atomic number). These equations can’t be balanced like chemical equations because the identities of the atoms can change. On the left of equation, the top number is the atomic mass and the bottom number is the atomic number. Take note that if you add the atomic mass (top number), you’ll get the the atomic mass of of the atom pre-transmutation. Same applies with atomic number. This shows a balanced nuclear equation.
The atomic number is the number of protons in a nucleus. The mass number is the sum of the protons and neutrons in a nucleus. Electrons have very small masses, so they are not accounted in atomic mass.
Name the following compound and tell what type of compound it is: Protons 6, Neutrons 8, and electrons 6
Answer:
Carbon-14
Explanation:
It's carbon, because the element has 6 proton.
It's not an ion, because there are same number of proton and electron 6=6
It is carbon-14 because 6 proton + 8 neutron = 14
The Lewis electron-dot structure of oxygen has how many dots?
Answer:
Oxygen has 6 valence electrons and follows the octet rule.
If you were drawing a lewis structure for O2, there would be a total of 12 valence electrons (6 x 2 = 12).
The completed structure would have a double bond between the two oxygen atoms with 2 lone pairs per oxygen, giving you a total of 8 electrons that are lone pairs (or dots).
The ___ of a bottle tells you how much liquid it can hold. what is the anewer
Answer:
Volume
Explanation:
Volume is how much of a substance something can hold!
Hope this helped, have a nice day! :)
The word that completes the sentence is "volume."The volume of a bottle refers to how much liquid it can hold, typically measured in liters or milliliters.
Knowing the volume of a bottle is important when you need to measure out or store a certain amount of liquid. Different types of bottles have different capacities, so it's important to check the label or specifications to determine the right size for your needs.
Volume is a measure of three-dimensional space. It is often quantified numerically using SI derived units or by various imperial or US customary units (such as the gallon, quart, cubic inch). The definition of length (cubed) is interrelated with volume. The volume of a container is generally understood to be the capacity of the container; i.e., the amount of fluid (gas or liquid) that the container could hold, rather than the amount of space the container itself displaces.
Thus, the word that completes the sentence is "volume."
Learn more about volume,here:
https://brainly.com/question/28058531
#SPJ3
6. What is the atomic mass of Hafnium if out of every 200 atoms, 10 have mass 176.00 g/mol, 38 have mass
177.00 g/mol, 54 have mass 178.00 g/mol, 28 have mass 179.00 g/mol, and 70 have mass 180.00 g/mol?
Answer:
ttyhjj
Explanation:
How many atoms are in 1.27 mol of pure aluminum?
Answer:
To determine the amount of atoms (or molecules) present given the moles of an element, you multiply the amount of moles by Avogadro's number,
6.022
⋅
10
23
4 mol
A
l
6.022
⋅
10
23
1
m
o
l
=
2.41
⋅
10
24
atoms/molecules of
A
l
Explanation:
You and your family have just arrived in Water Cycle Land. You are going on a new ride called the Water Cycle. You sit in your seat and the ride begins. All of a sudden something goes wrong. Your body is turning into a water droplet! Think about what you have learned about the water cycle. Now tell a story about what happens to you as you travel through the water cycle. By the way, how do you get your body back to normal?
Answer: you dont drink water for years
Explanation: dont drink water for years on end
The green light emitted by a stoplight has a wavelength of 505 nm. What is the frequency of this photon? (c = 3.00 × 10⁸ m/s).
Answer:
5.9405*10^14 Hz
Explanation:
Remember the equation c=v*λ
v=frequency
λ=wavelength
By manipulating the equation, we can get it in terms of frequency:
c/λ=v
Now convert wavelength to meters (1nm=m*10^-9)
5.05*10^-7m (2 decimal places were shifted to make the number between 1-10, hence the -7 exponent)
Use the manipulated equation:
(3.00*10^8)/(5.05*10^-7), which yields:
5.9405*10^14 Hz (or s^-1)
The frequency of the photon will be "[tex]5.9405\times 10^{14} \ Hz[/tex]".
According to the question,
Wavelength,
[tex]\lambda = 505 \ nm[/tex]or,
[tex]= 5.05\times 10^{-7} \ m[/tex]
As we know the equation,
→ [tex]c = v\times \lambda[/tex]
or,
→ [tex]v = \frac{c}{\lambda}[/tex]
By putting the values, we get
[tex]= \frac{3.00\times 10^8}{5.05\times 10^{-7}}[/tex]
[tex]= 5.9405\times 10^{14} \ Hz[/tex]
Thus the above answer is right.
Learn more:
https://brainly.com/question/14523087
A car is accelerated at a rate of 2.5 meters/second?. If the starting speed is 5.0 meters/second, how
many seconds will it take the car to reach a final speed of 27.0 meters/second?
Answer:
8.8 seconds
Explanation:
Formula: acceleration = (v - u) /t where v = final velocity, u = initial velocity and t = time
a = 2.5 m/s²
u = 5.0
v = 27. 0
t =?
at = v - u
t = (v - u) /a
= (27- 5)/ 2.5
= 8.8 s
When the Northern Hemisphere is tilted ________the Sun, the sunlight is _________ direct than it is in the Southern Hemisphere. (Select all that apply.)
away from; less
toward; more
toward; less
away from; more
toward, more
away from, less
Explanation:
When the northern hemisphere is tilted toward the sun, the sunlight is more direct than it is in the southern hemisphere. This explains why it's wintertime in Australia while at the same time, it's summertime in the US.
When the northern hemisphere is tilted away from the sun, the sunlight is less direct than it is in the southern hemisphere. This explains why it's summertime in Australia while it's wintertime in the US.
Ribosome factory part or worker