Respuesta:
11,80 €
Explicación paso a paso:
Dado:
Importe o coste = 16,80 €
El valor de descuento sobre la cantidad = 5 €
El precio o costo con descuento sobre el monto entregado será; la diferencia entre la cantidad dada y el valor de descuento
Importe - valor de descuento
16,80 € - 5 €
= 11,80 €
PLZ HELPPPPPPP AND EXPLAIN BC I HAVE NO CLUE HOW TO DO THIS
A.) 500
B.) 490
C.) 21
D.) 390
i had this but your numbers aren't the same i thought i could help you..
Nine bearings made by a certain process have a mean diameter of 0.404 cm and a standard deviation of 0.003 cm. What can we say about the maximum error if we use x = 0.404 cm as an estimate of the mean diameter of bearings made by that process:
a) With a confidence of 95%
b) With a confidence of 99%
To determine the maximum error when using [tex]$x = 0.404$[/tex] cm as an estimate of the mean diameter of bearings made by the process, we can calculate the margin of error for different confidence levels.
a) With a confidence of 95%:
For a 95% confidence level, we can use the standard normal distribution and the formula for the margin of error:
[tex]\[\text{{Margin of error (E)}} = z \times \left(\frac{{\sigma}}{{\sqrt{n}}}\right)\][/tex]
where [tex]$z$[/tex] is the critical value corresponding to the desired confidence level, [tex]$\sigma$[/tex] is the standard deviation, and [tex]$n$[/tex] is the sample size.
Since we only have the population standard deviation [tex]($\sigma$)[/tex] and not the sample size [tex]($n$)[/tex] , we cannot calculate the margin of error without additional information. Please provide the sample size [tex]($n$)[/tex]to compute the maximum error with a 95% confidence level.
b) With a confidence of 99%:
Similarly, for a 99% confidence level, we can use the standard normal distribution and the formula for the margin of error:
[tex]\[\text{{Margin of error (E)}} = z \times \left(\frac{{\sigma}}{{\sqrt{n}}}\right)\][/tex]
Using a 99% confidence level, the critical value [tex]($z$)[/tex] is 2.576 (obtained from the standard normal distribution table).
Therefore, the maximum error with a 99% confidence level can be calculated as:
[tex]\[\text{{Margin of error (E)}} = 2.576 \times \left(\frac{{0.003}}{{\sqrt{n}}}\right)\][/tex]
Again, we need the sample size [tex]($n$)[/tex] to compute the maximum error with a 99% confidence level. Please provide the sample size to proceed with the calculation.
To know more about Margin visit-
brainly.com/question/9506408
#SPJ11
A trapezoid has angles 54 degrees, 54 degrees, x, and x. Look at the trapezoid shown. What is the measure of angle x? The measure of each angle x is 54° 90° 126° 252°
Answer: the answer is C 126°
What is the quotient of 905.8 and 0.2?
Answer: 4529
Step-by-step explanation:
Hope it helps Have a good Day
Just divide it
Ben opened a savings
account with $75,
Every week he added
$20 more. Write on
equation to model this
situation.
Answer:
The equation would be y = 75 + 20x
Convert 456,300,000 to scientific notation.
Answer:
I believe it would be 4.563 x 10^8
what is the area of a trapezoid
Answer:
28 in² = 28
Step-by-step explanation:
[tex]a = \frac{a + b}{2}h[/tex]
[tex]a = 6[/tex]
[tex]b = 8[/tex]
[tex]h = 4[/tex]
[tex]a = \frac{6 + 8}{2}4[/tex]
[tex] \frac{14}{2} 4[/tex]
[tex]7 \times 4[/tex]
[tex] = 28[/tex]
Answer = 28 _
The depth of a river changes after a heavy rainstorm, Its depth, in feet, is modeled as a function of time, in hours. Consider this graph of the function. Enter the average rate of change for the depth of the river, measured as feet per hour, between hour 9 and hour 18. Round your answer to the nearest tenth
Answer:
The average rate of change for the depth of the river measured as feet per hour is approximately 0.3 feet/hour
Step-by-step explanation:
The depth of the river in feet with time is given by the function with the attached
From the graph, we have;
The depth of the river at hour t = 9 is f(9) = 18 feet
The depth of the river at hour t = 18 is f(18) = 21 feet
The average rate of change, A(x), for the depth of the river measured as feet per hour is given as follows;
[tex]A(X) = \dfrac{f(b) - f(a)}{b - a}[/tex]
Therefore, for the river, we have;
[tex]A(X) = \dfrac{f(18) - f(9)}{18 - 9} = \dfrac{21 - 18}{18 -9} = \dfrac{3}{9} =\dfrac{1}{3}[/tex]
The average rate of change for the depth of the river measured as feet per hour A(X) = 1/3 feet/hour
By rounding the answer to the nearest tenth, we have;
A(X) = 0.3 feet/hour.
What is meant by a biased sample?
A biased sample refers to a sample that is not representative of the population it is intended to represent. In a biased sample, certain characteristics or groups within the population are either overrepresented or underrepresented, leading to a distortion or skew in the data.
Bias can occur in various ways during the sampling process. Here are a few examples:
1. Selection Bias: When the method used to select the sample systematically favors or excludes certain individuals or groups from being included. This can lead to an overrepresentation or underrepresentation of specific characteristics in the sample.
2. Nonresponse Bias: When a portion of the selected sample does not participate or respond to the survey or study, resulting in a biased representation of the population.
3. Volunteer Bias: When individuals self-select to participate in a study or survey, which can introduce bias as those who volunteer may have different characteristics or motivations compared to the general population.
4. Measurement Bias: When the measurement instrument or procedure used to collect data systematically produces errors or inaccuracies that favor or exclude certain groups or characteristics.
Biased samples can lead to misleading or inaccurate conclusions about the population of interest since the sample does not accurately reflect the diversity and characteristics of the entire population. It is essential to strive for representative and unbiased samples to make valid inferences and generalizations about the population.
To know more about biased sampling , refer here:
https://brainly.com/question/29257227#
#SPJ11
The National Teacher Association survey asked primary school teachers about the size of their classes. Nineteen percent responded that their class size was larger than 30. Suppose 760 teachers are randomly selected, find the probability that more than 22% of them say their class sizes are larger than 30.
The probability for more than 22% of the given data say their class sizes are larger than 30 is equal to 0.0864, or 8.64%.
To find the probability that more than 22% of the randomly selected teachers say their class sizes are larger than 30,
Use the binomial distribution.
Let us denote the probability of a teacher saying their class size is larger than 30 as p.
19% of the teachers responded with a class size larger than 30, we can estimate p as 0.19.
Now, calculate the probability using the binomial distribution.
find the probability of having more than 22% of the 760 teachers .
which is equivalent to more than 0.22 × 760 = 167 teachers saying their class sizes are larger than 30.
P(X > 167) = 1 - P(X ≤167)
Using the binomial distribution formula,
P(X ≤167) = [tex]\sum_{i=0}^{167}[/tex] [C(760, i) × [tex]p^i[/tex] × [tex](1-p)^{(760-i)[/tex]]
where C(n, r) represents the combination 'n choose r' the number of ways to choose r items from a set of n.
Using a statistical calculator, the probability P(X ≤ 167) is determined to be approximately 0.9136.
This implies,
The probability of having more than 22% of the randomly selected teachers say their class sizes are larger than 30 is,
P(X > 167)
= 1 - P(X ≤ 167)
≈ 1 - 0.9136
≈ 0.0864
Therefore, the probability for the given condition is approximately 0.0864, or 8.64%.
Learn more about probability here
brainly.com/question/32245643
#SPJ4
There is 20 million m3 of water in a lake at the beginning of a month. Rainfall in this month is a random variable with an average of 1 million mº and a standard deviation of 0.5 million mº. The monthly water flow entering the lake is also a random variable, with an average of 8 million mº and a standard deviation of 2 million mº. Average monthly evaporation is 3 million m3 and standard deviation is 1 million mº. 10 million m’ of water will be drawn from the lake this month. a Calculate the mean and standard deviation of the water volume in the lake at the end of the month. b Assuming that all random variables in the problem are normally distributed, calculate the probability that the end-of-month volume will remain greater than 18 million m3.
The probability that the end-of-month volume will remain greater than 18 million m³ is approximately 0.1922.
a)The mean water volume in the lake at the end of the month can be calculated using the formula given below:
Mean water volume = Starting water volume + Total rainfall + Total flow - Total evaporation - Water drawn from the lake
Given:
Starting water volume = 20 million m³
Total rainfall = random variable with mean = 1 million m³ and standard deviation = 0.5 million m³
Total flow = random variable with mean = 8 million m³ and standard deviation = 2 million m³
Total evaporation = 3 million m³
Water drawn from the lake = 10 million m³
Now, let's calculate the mean water volume at the end of the month.
Mean water volume = Starting water volume + Total rainfall + Total flow - Total evaporation - Water drawn from the lake= 20 + 1 + 8 - 3 - 10= 16 million m³
Therefore, the mean water volume at the end of the month is 16 million m³.
The standard deviation of the water volume in the lake at the end of the month can be calculated using the formula given below:
σ = √{σr² + σf² + σe²}
σr = standard deviation of rainfall = 0.5 million m³
σf = standard deviation of flow = 2 million m³
σe = standard deviation of evaporation = 1 million m³σ = √{σr² + σf² + σe²}σ = √{0.5² + 2² + 1²}= √{5.25}≈ 2.29 million m³
Therefore, the standard deviation of the water volume in the lake at the end of the month is approximately 2.29 million m³.b)Given that all the random variables in the problem are normally distributed, we can find the probability that the end-of-month volume will remain greater than 18 million m³ using the z-score formula.
z = (x - μ) / σ
Where,
z = z-scorex = 18 μ = 16σ = 2.29
Now, let's calculate the z-score.
z = (x - μ) / σ= (18 - 16) / 2.29= 0.87
Using the z-table, we can find that the probability of z being less than 0.87 is 0.8078.
Therefore, the probability of the end-of-month volume being greater than 18 million m³ is:
1 - 0.8078 = 0.1922 (rounded to 4 decimal places)
Hence, the probability that the end-of-month volume will remain greater than 18 million m³ is approximately 0.1922.
Learn more about probability here:
https://brainly.com/question/32117953
#SPJ11
You drop a ball vertically from a height of 1 m. It returns to a height of 0.6 m. What is the coefficient of restitution between the ball and the ground?
The coefficient of restitution between the ball and the ground is 0, indicating a completely inelastic collision.
The coefficient of restitution (e) is a measure of the elasticity or bounciness of a collision between two objects. It is defined as the ratio of the relative velocity of separation after the collision to the relative velocity of approach before the collision.
In this case, the ball is dropped vertically from a height of 1 m and returns to a height of 0.6 m. We can assume that the collision with the ground is approximately elastic, meaning that kinetic energy is conserved.
When the ball hits the ground, its initial velocity is zero, and the final velocity after the collision is also zero since it momentarily comes to rest before bouncing back up. Therefore, the relative velocity of separation is zero.
The relative velocity of the approach is the velocity just before the collision. Since the ball is dropped vertically, its velocity just before hitting the ground is given by the equation:
[tex]v = \sqrt(2gh)[/tex]
where v is the velocity, g is the acceleration due to gravity (approximately[tex]9.8 m/s^2[/tex]), and h is the initial height (1 m).
Plugging in the values:
[tex]v = \sqrt(2 * 9.8 * 1)[/tex]
[tex]= \sqrt(19.6)[/tex]
≈ 4.427 m/s
Therefore, the relative velocity of the approach is approximately 4.427 m/s.
Since the relative velocity of separation is zero, we can calculate the coefficient of restitution (e) as:
e = 0 / 4.427
= 0
Therefore, the coefficient of restitution between the ball and the ground, in this case, is 0, indicating a completely inelastic collision where the ball comes to a stop upon hitting the ground and does not bounce back.
To know more about coefficients, visit:
brainly.com/question/30066987
#SPJ4
Help please will give brainlist!!!
MODELING REAL LIFE The equation y=2x + 3 represents the cost y(in dollars) of mailing a package that weighs x pounds.
a. Use a graph to estimate how much costs to mail the package.
b. Use the equation to find exactly how much it costs to mail the package.
It costs $ to mail the package.
Answer:
I can't read the weight of the package due to the image quality, could you type it out please.
factorise:x^2-y^2-x-y
9514 1404 393
Answer:
(x -y -1)(x +y)
Step-by-step explanation:
The expression can be factored by grouping.
x^2 -y^2 -x -y = (x^2 -y^2) -(x +y)
= (x -y)(x +y) -1(x +y)
= (x -y -1)(x +y)
_____
It is useful to know that a difference of squares is factored as ...
a^2 -b^2 = (a -b)(a +b)
which fractions are the least common denominator of 84
A. 3/4, 1/7 and 1/6
B. 2/3, 1/6 and 1/42
C. 2/27, 1/7 and 1/3
D. 2/3, 1/6 and 1/7
Answer:
C
Step-by-step explanation:
A cheese shop has some bulk cheese in blocks measuring 30 cm x 20 cm x 8 cm. How much paper is needed to cover the block of cheese
Answer:
232cm
Step-by-step explanation:
A cheese usually has the shape of a cuboid.
Characteristics of a Cuboid
A cuboid is a convex polyhedronIt has 12 edgesIt has 8 facesIts base shape is a rectangleIt has 6 facesThe amount of paper that would be needed to cover the block of cheese can be determined by calculating the perimeter of the block of cheese which is shaped as a cuboid
Perimeter of a cuboid = 4 x (length + breadth + height)
4 x (30 + 20 + 8) = 232cm
In general, how many variables are there in an experiment? O a. Many including independent and dependent variables n O b. One independent variable and one dependent variable O c. None because experiments are controlled for the best results O d. Moisture and temperature are the only variables
In an experiment, there are many variables including independent and dependent variables. Therefore, the correct option is a.
Many including independent and dependent variables.
Variables are any feature, amount, or state that can be quantified or measured in any way. In a study, the term variable refers to any feature that can be changed or manipulated.
Variables in an Experiment. In an experiment, an independent variable is a variable that is changed or manipulated by the experimenter, and a dependent variable is a variable that is measured in response to the independent variable.
An independent variable is a variable that is changed or manipulated in an experiment by the researcher. The independent variable is the one that the researcher controls in order to examine its effect on the dependent variable.
The dependent variable is the variable that is measured in response to changes in the independent variable. This is the variable that the experimenter is interested in studying and is affected by the independent variable.
An experiment is a scientific study in which the researcher manipulates one or more independent variables in order to observe the effect on the dependent variable.
Learn more about Variable:https://brainly.com/question/28248724
#SPJ11
a) 5x-12=2x-3
b) 8x+2=5x+8
c) 7x-5=4x-2
please
What's the question?
What are we supposed to do?
1/5 x 11 simplified if can
Answer:
2.2
Step-by-step explanation:
Answer:
11/5
Step-by-step explanation:
Find the common difference of the arithmetic sequence 13, 10, 7
Answer: -3
Step-by-step explanation: DeltaMath
Solve for x.
-3(x+5)=-9
Enter your answer in the box. X=__
Answer:
x=-2
Step-by-step explanation:
Divide both sides by the numeric factor on the left side, then solve.
2. (10 Points) Show that g(x) = (3) * has a unique fixed on [0,1].
The function g(x) = (3)ˣ has a unique fixed on [0,1]
Showing that the function has a unique fixed on [0,1].From the question, we have the following parameters that can be used in our computation:
g(x) = (3)ˣ
The above function is an exponential function with the following features
Initial value = 1
Rate = 3
using the above as a guide, we have the following:
x = 0 in [0, 1]
So, we have
g(0) = (3)⁰
Evaluate
g(0) = 1
See that g(0) = 1 i.e. [0. 1]
Hence, the function has a unique fixed on [0,1]
Read more about function at
https://brainly.com/question/27915724
#SPJ1
Write two expressions that are equivalent to 7 x 10 to the -4
[tex]\huge\text{Hey there!}[/tex]
[tex]\mathsf{7\times 10^{-4}}[/tex]
[tex]\rightarrow\mathsf{7\times\dfrac{1}{10\times10\times10\times10}}[/tex]
[tex]\mathsf{= \dfrac{7}{10\times10\times10\times10}}[/tex]
[tex]\mathsf{10\times10\times10\times10=100\times100=10,000=\bf 10^4}[/tex]
[tex]\mathsf{=\dfrac{7}{10^4}}[/tex]
[tex]\mathsf{=\dfrac{7}{10,000}}[/tex]
[tex]\boxed{\boxed{\large\textsf{Possible ANSWERS: }\mathsf{\bf {\dfrac{7}{10^4}\ or \ \dfrac{7}{10,000}}}}}\huge\checkmark[/tex]
[tex]\text{Good luck on your assignment and enjoy your day!}[/tex]
~[tex]\frak{Amphitrite1040:)}[/tex]
HURRY PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Answer:
Option 3 Or number 5
Step-by-step explanation:
Answer:
8
Step-by-step explanation:
Eight people are at least 169.5 cm tall because the frequency of people that height is five. The frequency of people taller than 169.5 (because it said 'at least') is three. 5 + 3 = 8
Mr. Herman's class is selling candy for a school fundraiser. The class has a goal of raising $500 by selling C
boxes of candy. For every box they sell, they make $2.75.
Write an equation that the students could solve to figure out how many boxes of candy they need to sell.
Answer:
2.75 x (c) = 500
Step-by-step explanation:
i think this is it
Solve the logarithmic equation with Properties of Logs
Answer:
Simplifying
logx + -4 = 0
Reorder the terms:
-4 + glox = 0
Solving
-4 + glox = 0
Solving for variable 'g'.
Move all terms containing g to the left, all other terms to the right.
Add '4' to each side of the equation.
-4 + 4 + glox = 0 + 4
Combine like terms: -4 + 4 = 0
0 + glox = 0 + 4
glox = 0 + 4
Combine like terms: 0 + 4 = 4
glox = 4
Divide each side by 'lox'.
g = 4l-1o-1x-1
Simplifying
g = 4l-1o-1x-1
Answer:
[tex]x=40000[/tex]
Step-by-step explanation:
[tex]log(x)-log(4)=4\\log(\frac{x}{4})=4\\\frac{x}{4} = 10^4 \\x=4*10^4=40000[/tex]
If a population of 10,000 increases by 5% every year, how large will the population be in 5 years?
______________________________
Answer:
10.500
Step-by-step explanation:
step by step explenation
a) 3= x + 7
b) -7a-49
Answer: b im pretty sure hope this helps :)
Step-by-step explanation:
Answer:
A: x = -4
B: a = -7 (I'm assuming the '-' in front of 49 was supposed to be an '=')
Step-by-step explanation:
A: You need to group the like terms together, and isolate the variable, which in this case is x.
Take the 7 over to the other side, so the equation looks a little bit like this.
3-7 = x.
3-7 is -4, so we've gotten our answer.
x = -4.
B: -7a = 49.
When two negative numbers are multiplied together, the product becomes positive.
49 is 7x7.
-7 times -7 would be 49.
So, in this situation, a would be -7.
a = -7.
if 121 ml of a 1.0 m glucose solution is diluted to 550.0 ml , what is the molarity of the diluted solution?
The molarity of the diluted solution is approximately 0.220 M.
The concentration of a solute in a solution is measured by its molarity. The amount of solute that dissolves in one liter (L) of solution is the number of moles. One of the most used units of concentration is t, represented by the symbol M. Number of moles of solute contained in 1 liter of solution is how it is defined.
To calculate the molarity of a solution, you need to use the formula:
M₁V₁ = M₂V₂
Substituting these values into the formula:
(1.0 M)(121 ml) = M₂(550.0 ml)
Rearranging the equation to solve for M₂:
M₂ = (1.0 M)(121 ml) / (550.0 ml)
M₂ = 121 / 550 ≈ 0.220 M
Therefore, the molarity of the diluted solution is approximately 0.220 M.
To learn more about molarity, refer to:
https://brainly.com/question/17138838
#SPJ4
The arm span and foot length were both measured (in centimeters) for each of 20 students in a biology class. The computer output displays the regression analysis.
Which of the following is the best interpretation of the coefficient of determination r2?
About 37% of the variation in arm span is accounted for by the linear relationship formed with the foot length.
About 65% of the variation in foot length is accounted for by the linear relationship formed with the arm span.
About 63% of the variation in arm span is accounted for by the linear relationship formed with the foot length.
About 63% of the variation in foot length is accounted for by the linear relationship formed with the arm span.
Answer:
The guy above me is completely wrong hahaha.
The correct answer should have a 63%.
It's probably D. The terminology is a little confusing.
The equation of the output looks like:
-7.611 + .186(x) = y
x --> Arm span
y --> Foot span
The linear relationship is formed with the armspan.
Answer: It’s D
Step-by-step explanation:
I took the test