Answer:
the ball being pulled toward the ground
Explanation:
A car moved 59 km north and 59 km south. What is the cars displacement
Answer:
Explanation:
40 km/h
the diagram at right shows a person sitting in a chair riding on a ferris wheel. the chair is attached to the wheel by a rod. the ferris wheel turns with constant speed the mass of the person is two times that of the chair
The ranking of the boy's location in the ferris wheel ridding motion above comparing his felt weight from the highest to the lowest is 1, 2 and 4 tie, 3.
The correct answer choice is option c.
The correct image is attached.
Understanding the weight felt by the boy ferris wheel ridding.In motion above by the boy, the boy feels he weighs the greatest at location 3 among all the location simply because there is a force known as centripetal force which technically acts upward at that point which makes more weight be felt among all.
However, at the locations 2 and 4, the force actually was acting side ways, which would still not affect the weight from 3 in the circular movement. And at location, the weight felt feels the lowest among all.
In conclusion, the locations of the boy on a ferris wheel ridding from the greatest is highest to the lowest is 1, 2 and 4 tie, 3.
Complete question:
The diagram above represents a Ferris wheel-a circular ride that rotates in a vertical circle with seats where people sit. The numbers correspond to a seat in four difference places as the Ferris wheel rotates.
Imagine a boy sitting in this seat riding the ride with the Ferris wheel rotating in the direction shown (at constant speed). Rank the locations according to how much the boy would feel like he weighs,greatest first.
a. 1, 2, 3, 4
b. 1 and 3 tie, 2 and 4 tie.
c. 1, 2 and 4 tie, 3
d. 4, 3, 2, 1.
Read more on ferris wheel ridding:
https://brainly.com/question/11886264
#SPJ1
A load of 15N is placed on a scale pan attached to a spring balance. This load causes an extension of 5cm in the spring what load must be placed on the spring balance an extension of 8cm? What is the spring constant of the spring
A load of 24N must be placed on the spring balance for an extension of 8cm and the value of spring constant is calculated as 3N[tex]cm^{-1}[/tex].
How can you figure out how long a spring will extend?The lengthened portion of an object, such as a spring, is known as its extension.
F = ke
The force in newtons is F. (N)
The “spring constant” (k) is expressed in newtons per meter (N/m).
E is the length in meters (m)
This equation is valid as long as the proportionality limit is not exceeded.
What is the proportionate relationship between the spring’s length extension?The extension for a particular spring and other elastic items is inversely proportional to the applied force. For instance, the extension doubles if the force does.
Case 1Kx = 15N
K = 15/x
= 15/5
K = 3N[tex]cm^{-1}[/tex]
Case 2dx = 8cm
The value of spring constant is = 3N[tex]cm^{-1}[/tex]
So, 3(8) = 24
To know more about spring force visit:
https://brainly.com/question/14655680
#SPJ9
Making progress by conducting studies for research, project or article and presenting these progress to scientists.
Which category does this belong to? :
A. Science
B. Technology
C. Reading
D. Engineering
Sorry I didn't know which Subject to pick.
Making progress by conducting studies for research, project or article and presenting this progress to scientists represent a category that belongs to Science (Option A).
What is the meaning of science?Sciences can be defined as a body of empirical knowledge whose development is based on the presentation of results from experiments in peer-reviewed publications and the generation of projects to investigate different issues of the real world.
Therefore, we can conclude that Science is a body of info based on the transference of knowledge which involves developing projects or writing scientific articles (Option A).
Learn more about the meaning of science here:
https://brainly.com/question/14054972
#SPJ1
If there are six H2O molecules, then the notation is 6H2O .
How many atoms of hydrogen are there?
b. How many atoms of oxygen are there?
c. How many of each type of atom would there be if these six water molecules underwent electrolysis?
If there are six water molecules, the following applies;
There are 12 atoms of hydrogenThere are 6 atoms of oxygenWhat is a molecule?A molecule is the smallest particle of a specific element or compound that retains the chemical properties of that element or compound i.e. two or more atoms held together by chemical bonds.
Atoms of an element are usually shown in the chemical or molecular formula, which is a notation indicating the number of atoms of each element present in a compound.
According to this question, six water molecules are given as follows: 6H₂O
This means that there are 6 × 2 = 12 atoms of hydrogen and 6 × 1 = 6 atoms of oxygen in the 6 molecules of water.
Electrolysis is the chemical change produced by passing an electric current through a conducting solution or a molten salt.
If six molecules of water undergoes electrolysis, there would be 12 atoms of hydrogen and 6 atoms of oxygen.
Learn more about molecules at: https://brainly.com/question/19556990
#SPJ1
Ashley throws a baseball into the air at 20 m/s.
Determine the time it takes the ball to reach its maximum height.
What is the ball’s maximum height?
How long is the baseball’s total trip back to Ashley’s hand? (Assuming she kept it in the same place.)
Answer:
Take upwards as positive and downwards as negative
Explanation:
the time to reach the maximum height is 2,04s, therefore the time to come back down will be doubled that which is 4,08s
Hope this helps !!
Ashley throws a baseball into the air at 20 m/s, the time needed to reach the maximum height is 2,04s, therefore the time to come back down will be doubled that which is 4,08s.
What are the unit of length ?length measurement can be defined as an act for the identification of the length of the object in some standard or non-standard units.
The most common units of length are U.S. customary units and the metric units which mainly include SI and non-SI units, others are British Imperial units are also still used in some countries.
Other units of length also include kilometres, nanometre, millimetres, centimetres, metres, decimetres where as the Imperial and U.S. customary systems, basic unit of length is the yard.
other units are thou (1⁄1000 of an inch), line (1⁄12 of an inch), inch (25.4 mm), foot (12 inches, 0.3048 m)
For more details height, visit
https://brainly.com/question/27889992
#SPJ2
A wire of length l is drawn such that its diameter is reduced to half its orginal diameter. if the initial resistance of the wire were 10 ohm, its resistance would be
a) 40 ohm
b) 60 ohm
c) 120 ohm
d) 160 ohm
Please answer the question on the photo
Answer:
your answers is option d 75 ohms
As one proceeds down the column of the halogens, the reactivity tends to a) increase because the valence electrons are less attracted to the nucleus b) increases because there are a greater number of protons in the nucleus c) decrease because there are more valence electrons in the atom itself d) decrease because the nucleus exerts a weaker pull on the valence electrons
As one proceeds down the group of halogens, one would find that the reactivity of the elements decreases. This is because the ionic radii increase down the group. And as the ionic radii increase, the nucleus of halogens exerts a weaker pull on the valance electrons.
Thus the correct answer is option d.
A group of physics students launched a rocket in a field at their school. They recorded the time it took for the rocket to launch into the air and come back to the ground. They calculated their average time for their rocket to land to be 12.74 seconds.
1. How long did the rocket take to reach max height?
2. What is the velocity of the rocket at max height?
3. What is the initial velocity of the rocket?
4. What was the maximum height of the rocket?
The time taken by the rocket to reach maximum height is 6.37 s. The velocity of the rocket at maximum height is 62.43 m/s. The initial velocity of the rocket is 0. The maximum height of the rocket is 198.8 m.
1 ) Total time taken = 12.74 s
Time taken to reach maximum height = Time taken to reach the ground from the maximum height
Time taken to reach maximum height = 12.74 / 2
Time taken to reach maximum height = 6.37 s
2 ) a = g = 9.8 m / s²
v = u + a t
v = 0 + ( 9.8 * 6.37 )
v = 62.43 m / s
3 ) The initial velocity of the rocket is zero
4 ) According to equations of motion,
s = u t + 1 / 2 a t²
s = 0 + ( 1 / 2 * 9.8 * 6.37² )
s = 198.8 m
Therefore,
The time taken by the rocket to reach maximum height is 6.37 sThe velocity of the rocket at maximum height is 62.43 m / sThe initial velocity of the rocket is 0The maximum height of the rocket is 198.8 mTo know more about Equation of motion
https://brainly.com/question/5955789
#SPJ1
Co is a compound product of a chemical reaction between __ atom and __ atom.
A wrecking ball on a 15.4 m longcable is pulled back to an angle of33.5° and released. At what speedis it moving at the bottom of itsswing?(Unit = m/s)Enter
Given data
*The given length of the cable is L = 15.4 m
*The given angle is
[tex]\theta=33.5^0[/tex]The formula for the height is given as
[tex]h=L(1-\cos \theta)[/tex]Substitute the values in the above expression as
[tex]\begin{gathered} h=15.4(1-\cos 33.5^0) \\ =2.57\text{ m} \end{gathered}[/tex]The formula for the velocity of the ball at the bottom of its swing is given as
[tex]v=\sqrt[]{2gh}[/tex][tex]\begin{gathered} v=\sqrt[]{2\times9.8\times2.57} \\ =7.09\text{ m/s} \end{gathered}[/tex]A 10-kg iron ball is dropped onto a pavement from a height of 150 m . Suppose that half of the heat generated goes into warming the ball. What is the temperature increase of the ball. (The specific heat capacity of iron is 450 J/kg ⋅ ∘C . Use 9.8 N/kg for g .).
The temperature increase of the ball is 1.63 ⁰C.
What is the potential energy of the ball?The potential energy possessed by the ball at the given height is calculated as follows;
P.E = mgh
where;
m is mass of the ballh is the heightg is acceleration due to gravityP.E = (10) x (9.8) x (150)
P.E = 14,700 J
If half of the energy of the ball is converted into heat energy, then the amount of heat capacity is calculated as follows;
Q = 0.5(P.E)
Q = 0.5 x 14,700
Q = 7,350 J
The increase in the temperature of the temperature of the ball is calculated as follows;
Q = mcΔθ
where;
c is specific heat capacity of ironΔθ is increase in temperatureΔθ = Q/mc
Δθ = (7350) / (10 x 450)
Δθ = 1.63 ⁰C
Learn more about heat capacity here: https://brainly.com/question/16559442
#SPJ1
The push exerted on one object when it has a collision with another object is called
?
Your answer
The push exerted on one object when it has a collision with another object these forces are also referred to as force pairs, action forces, and reaction forces.
Collision: What is it?A collision, also known as an impact, occurs when two bodies, such as two pool cues, a golf club and a ball, a hammer and a nail, two railroad cars when joined, or a falling object and a floor, suddenly and violently collide. Collisions help physicists understand the characteristics of atomic and subatomic particles.
Collisions happen when two objects come into contact. In most cases, conservation of momentum and conservation of energy are used to solve collision-related problems. Collisions might be of two different types: Momentum is conserved in inelastic collisions, whereas it is also conserved in elastic collisions together with kinetic energy.
To learn more about collision click on the link below:
https://brainly.com/question/25945297
#SPJ9
A ray of sunlight moves from the air into the denser medium of a pond. The light ray will? A) Be reflectedB) not be affected C) speed up D) slow down
When a ray of light passes from the rarer medium to the denser medium, it bends towards the normal.
When the ray of sunlight moves from the air into the denser medium of a pound, the light ray will slow down as it passes rarer to denser medium. It bends towards the normal.
Thus, the correct option is (D).
how does the philippines generate 17 percent of its electricity with geothermal energy
Coal is used to produce the majority of the electricity in the Philippines. The country's total electricity production in 2021 was 47.6% fueled by fossil fuels. Another 10.7% of the fuel was natural gas. In that year, fossil fuels accounted for about 76 percent of the nation's electricity output.
What is geothermal energy?Geothermal energy is heat that rises from the earth's interior. Geothermal energy travels to the Earth's surface in the form of water or steam. Depending on its properties, geothermal energy can be utilized to produce clean electricity or be used for heating and cooling.
Due to its location along the Ring of Fire zone of Pacific volcanoes, the Philippines is among the top geothermal energy producers in the world. On March 9, 2018, the nation turned on the 12-megawatt Maibarara Geothermal Power Plant-2 in Santo Tomas, Batangas.
To know more about geothermal energy, visit:
https://brainly.com/question/1061324
#SPJ9
A 30.0-mg oil drop carrying a charge of +3.2 μC passes undeflected through a region in which there is a uniform, constant electric field.
Determine the Electric field Ey.
A 30.0-mg oil drop carrying a charge of +3.2 μC passes undeflected through a region in which there is a uniform, constant electric field. The Electric field is mathematically given as
98 N/C
This is further explained below.
What is the Electric field?Generally, Generally, the equation for Electric field the is mathematically given as
q E=m g
q=chargeE= electric fieldm=massg= gravityTherefore
[tex]&\left(3 \times 10^{-6} \mathrm{C}\right) E=\left(30 \times 10^{-6} \mathrm{~kg}\right)\left(9.8 \mathrm{~m} / \mathrm{s}^2\right) \\[/tex]
E=98N/C
In conclusion, The force of gravity always pulls in a downward direction; hence, the electric field will be exerted in an upward direction. As a result, the value is positive.
Read more about gravity
https://brainly.com/question/4014727
#SPJ1
Which example BEST illustrates hindsight bias?
Please choose the correct answer from the following choices, and then select the submit answer button.
Answer choices
A: You predicted you would earn 80 percent on your test, but you only earned 70 percent.
B: You meet a person on the street and feel an instant attraction. Later on, you tell a friend about the encounter and state that you just met the person you will marry.
C: You believe that previously infertile couples will become pregnant after adopting a child.
D: You just found out that the homecoming queen and captain of the football team from your high school are splitting up. You think back to the last time you saw them together and have the feeling that you could have predicted their breakup.
Answer:
A
Explanation:
you predicted it in the past and assumed the outcome of your result and they was a difference of 10 percent
Predict the order of precipitation of Cl-, CO32-, Br- upon the addition of
AgNO3.
Ksp
AgCl
1.8 x 10- 10
Ag2CO3
8.1 x 10- 12
AgBr
5.0 x 10- 13
Answer:
I am not understanding your question
A 25kg child resting at the top of a 2 meter slide has how much potential energy?
Potential energy of a child at the top is 490 J.
Potential energy, U = mgh
U = potential energy
m = mass of an object, given = 25kg
g = acceleration due to gravity, given = 9.8 m/[tex]s^{2}[/tex]
h = height of an object, given = 2 meter
Put the values in potential energy formula, U = mgh
U = mgh
U = 25 × 9.8 × 2
U = 490 J
Hence, Potential energy of a child at the top is 490 J.
Potential energy is the type of energy, which is product of mass of an object, acceleration due to gravity and height of an object where it is placed. Its S.I. unit is joule and is represented by J.
Learn more about potential energy here:- https://brainly.com/question/14427111
#SPJ1
what type of focal length was primarily used in citizen kane?
25mn type of focal length was primarily used in citizen kane.
The focal lengths and lenses used by 19 notable directors are analyzed in a new video essay by Wolfcrow, starting with Orson Welles' use of 25mm for Citizen Kane and 18mm for Touch of Evil.
In Orson Welles' Citizen Kane, deep focus was frequently used to provide the audience with insight into Charles Foster Kane's thoughts or to reveal more about his life. With deep focus, the foreground, middle ground, and backdrop are all sharply in focus at once.
learn more about focal length here :
https://brainly.com/question/16188698
#SPJ4
What is the angular speed of a satellite in a geo-synchronous orbit around the Earth?
A geostationary orbit can be achieved only at an altitude very close to 35,786 kilometres (22,236 miles) and directly above the equator. This equates to an orbital speed of 3.07 kilometres per second (1.91 miles per second) and an orbital period of 1,436 minutes, one sidereal day.
module 1 question 10
A student drove to the university from her home and noted that the odometer on her car increased by 14.0 km. The trip took 20.0 min.
(a) What was her average speed?
km/h
(b) If the straight-line distance from her home to the university is 10.3 km in a direction 25.0° south of east, what was her average velocity?
km/h (25° S of E)
(c) She returned home by the same path. The total time to leave home, travel to the university, and return home was 7 h 30 min. What were her average speed and velocity for the entire trip?
average speed
km/h
average velocity
km/h
(a) Average speed is 42 km/h
(b) Average velocity is 31.21 km/h (25° S of E)
(c) Average speed and average velocity are 3.73 km/h and 0 km/h respectively.
The average speed is calculated by distance travelled divided by time. The distance travelled is 14.0 km and time taken for the trip is 20.0 min.
The time taken for the trip in hours = 20.0/60 = 0.33 hr
Average speed = 14.0/0.33 = 42 km/h
The displacement is the shortest distance between two points. For this trip the displacement is 10.3 km in the direction 25.0° south of east. Then the average velocity is calculated by change in displacement divided by time.
Average velocity = (10.3-0)/0.33 = 31.21 km/h (25° S of E)
Average speed of the total trip = (14 + 14)/7.5 = 3.73 km/h
Average velocity of the total trip = (Final position - Initial position)/time = (0 - 0)/7.5 = 0 km/h
To know more about average velocity here:
https://brainly.com/question/12984400
#SPJ1
At a construction site, a 30.0-kg bucket of concrete is
connected over a very light frictionless pulley to a 375-N
box on the roof of a building. (Figure 1) There is no
appreciable friction on the box, since it is on roller
bearings. The box starts from rest.
Answer:
What is the full question?
1) A sample of a gas is in a container. The temperature of the gas is decreased. Based on the relationship between temperature and pressure, what must have happened to the pressure?
2) A gas is in a container with constant temperature. A pressure change caused the volume to decrease. Based on the relationship between pressure and volume, what must have happened to the pressure?
module 1 question 16
A soft tennis ball is dropped onto a hard floor from a height of 1.95 m and rebounds to a height of 1.44 m. (Assume that the positive direction is upward.)
(a) Calculate its velocity just before it strikes the floor.
m/s
(b) Calculate its velocity just after it leaves the floor on its way back up.
m/s
(c) Calculate its acceleration during contact with the floor if that contact lasts 3.50 ms.
m/s2
(d) How much did the ball compress during its collision with the floor, assuming the floor is absolutely rigid?
m
The velocity of the ball just before it strikes the floor is -6.18 m/s. The velocity of the ball just after it leaves the floor is 5.3 m/s. Acceleration during contact with the floor is 3280 m/s^2. The compression of the ball during its collision with the floor is -9.42*10^-4 m
(a) The ball dropped from a height 1.95 meters. The velocity just before it strikes the floor is calculated by the kinematic equation. The initial velocity is zero.
v^2 = u^2 + 2aS
v^2 = 0 + 2*-9.8*(0-1.95)
V = -sqrt(38.22) = -6.18 m/s
(b) The velocity just after it leaves the floor on its way back up. The initial velocity is zero in this case. The ball rebounds to a height of 1.44 m.
v^2 = u^2 + 2aS
v^2 = 0 + 2*-9.8*(1.44-0)
v = sqrt(28.22) = 5.3 m/s
(c) The acceleration during contact with the floor is calculated where time is 3.50 ms.
Time in seconds = 3.5/1000 = 0.0035
a = change in velocity/time
a = (5.3 m/s - -6.18 m/s)/0.0035
a = 11.48/0.0035 = 3280 m/s^2
(d) Assuming the floor is absolutely rigid. The amount which the ball compress during its collision with the floor is given as,
v^2 = u^2 + 2aS
S = (v^2 - u^2)/2a
S = (-6.18 m/s - 0)/2*3280 m/s^2
S = -9.42*10^-4 m
To know more about kinematic equation here:
https://brainly.com/question/28712225
#SPJ1
A projectile is fired from the edge of a cliff 200 m high with an initial speed of 30 m/s at an angle of 45° above the horizontal.
Determine the angle the velocity makes with the horizontal just before impact.
Answer:
By the law of conservation of energy,
m(gh + 1/2u^2)= m(1/2v^2) ---------- cancelling m from both side
=> 4.8 * 200 + 1/2 * (30)^2 = 1/2(v^2)
=> 1460 + 450 = v^2/2
=> 2410 * 2 = v^2
=> v = √4820
= 69.426m/s
Answer: 69.426 m/s
Two 1.6 cm-diameter disks face each other, 1.2 mm apart. They are charged to ± 15 nC. What is the electric field strength between the disks?
The electric field between the disks is 8.43*10^6 N/C
What is electric field of charged spherical spheres ?
A simple application of Gauss' law will yield the electric field of a conducting sphere with charge Q. In the case of a sphere-shaped Gaussian surface with radius r > R, the electric field is directed outward and has the same strength at every point along the surface. Simply multiplying the electric field by the spherical surface's area yields the electric flux.
The electric field is observed to be the same as a point charge Q at the sphere's centre. A Gaussian surface at r R will encompass no charge because all the charge will be on the conducting surface, and by virtue of its symmetry, can be observed to be zero at all places inside the sphere
Diameter of the disks = 1.6cm
Radius of the disks = 1.6/2= 0.8cm= 0.008m
gap between 2 disks d = 1.2mm = 0.0012m
Charge Q = ±15nC
E =σ/ϵ = Q/Aϵ = 15*10^-9/(8.854*10^-12*3.14*(0.008^2))
= 8.43*10^6 N/C
here,
σ (sigma) is surface charge density (C/m^2) and
ϵ (epsilon) is permittivity of free space
The electric field between the disks is 8.43*10^6 N/C
To know more about electric field from the given link
https://brainly.com/question/2193955
#SPJ9
How would the Sun’s effect on Earth change if the Sun was half its mass?
A The pull of gravity from the Sun would only be half as strong.
B The pull of gravity from the Sun would be a quarter of what it was.
C The pull of gravity from the Sun would not change.
D The pull of gravity from the Sun would only be twice as strong.
The Sun’s effect on Earth change if the Sun was half its mass, the pull of gravity from the Sun would only be half as strong and is denoted as option A.
What is Gravity?This is referred to as the universal force of attraction which acts on all matters and is dependent on some parameters such as mass etc.
The increase in mass denotes a corresponding increase in gravity and vice versa which is therefore the reason why if the Sun was half its mass, then the pull of gravity from the Sun would only be half as strong.
Read more about Gravity here https://brainly.com/question/940770
#SPJ1
Effect of the amount of water on bead plant growth
A pot of water is heated using a camping stove. The stove supplies 115,000 J of energy to the 0.54 kg of water. Given that the specific heat.
what is the amount of water on bead plant growth?If a plant's soil has too much water, the roots can rot, and the plant can't get enough oxygen from the soil. If there is not enough water for a plant, the nutrients it needs cannot travel through the plant. A plant cannot grow if it doesn't have healthy roots, so the proper balance of water is key when growing plants. Water level significantly affected seed germination and seedling establishment. The wet soil treatment germination rate (83%) was much higher than the waterlogged (56%) and submerged (44%) treatments. As water emerges or evaporates between the plant's stomata, water is pushed up from the soil through the roots and into the plant. Water conveys with its minerals and nutrients from the soil that are vital for plant growth.
so we can conclude that A pot of water is heated using a camping stove. The stove supplies 115,000 J of energy to the 0.54 kg of water. Given that the specific heat.
Learn more about it water here: https://brainly.com/question/1313076
#SPJ1