Answer:
0 m/s or stationary
The seat in front of Lee appear to be at rest
Explanation:
When the motion of a person or object is found by comparing the person or objects motion with regards to a stationary object or an object in motion, the result is the relative motion of the person or object to the stationary or moving object
In the question, Lee is comparing the motion of the chair in front of him with regards to the motion of the chair he his sitting on.
The speed of both chairs are the same as the speed of the train in which they are attached.
Therefore, as the seats are fixed relative to each other such that there is no change in their relative position and therefore, no or 0 m/s relative velocity with each other.
A mass of gas occupies 20 cm3 at 5 degrees Celcius and 760 mm Hg pressure. What is its volume at 30 degrees Celcius and 800 mm Hg pressure?
Answer:
20.7 cm³
Explanation:
From the question given above, the following data were obtained:
Initial volume (V1) = 20 cm³
Initial temperature (T1) = 5 °C
Initial pressure (P1) = 760 mm Hg
Final temperature (T2) = 30 °C
Final pressure (P2) = 800 mm Hg
Final volume (V2) =?
Next we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
Temperature (K) = Temperature (°C) + 273
Initial temperature (T1) = 5 °C
Initial temperature (T1) = 5 °C + 273 = 278 K.
Final temperature (T2) = 30 °C
Final temperature (T2) = 30 °C + 273 = 303 K.
Finally, we shall determine the new volume of the gas as follow:
Initial volume (V1) = 20 cm³
Initial temperature (T1) = 278 K
Initial pressure (P1) = 760 mm Hg
Final temperature (T2) = 303 K
Final pressure (P2) = 800 mm Hg
Final volume (V2) =?
P1V1/T1 = P2V2/T2
760 × 20 /278 = 800 × V2/303
Cross multiply
278 × 800 × V2 = 760 × 20 × 303
Divide both side by 278 × 800
V2 = (760 × 20 × 303) / (278 × 800)
V2 = 20.7 cm³
Therefore, the new volume of the gas is 20.7 cm³
A box of paper is labeled 24lb paper. This means that 500 sheets (counted number) of paper size 17in x 22in weighs 24 pounds (The paper industry in the US has not switched over to metric.). On earth, 1.0lb, using the standard acceleration of gravity, corresponds to 453.6g. Calculate the mass of a single piece of paper that measures 21.59cm x 27.94cm
Answer:
The mass of a single paper is approximately 0.047 lb/paper which in SI Units is approximately 21.77 g/paper
Explanation:
The given information on the size and the weight of paper are;
The mass of a box of 500 sheets of paper = 24 lb
The number of sheets in the paper = 500 sheets
The dimensions of the paper = 17 in. × 22 in., which is equivalent to 43.18 cm × 55.88 cm
The mass of a single paper = The mass of the box of paper/(The number of sheets of paper present in the box)
The mass of a single paper = 24 lb/500 = 0.047 lb/paper
Given that 1 lb = 453.6 g, we have;
0.047 lb/paper = 0.047 lb/paper×453.6 g/(lb) = 21.77 g/paper
The mass of a single paper = 0.047 lb/paper = 21.77 g/paper.
Answer:
5.349g
Explanation:
The other post forgot about the differing answer. They wanted the answer for 21.59cm*27.94cm. when they get that 0.047=43.18cm*55.88cm we can set a ratio;
0.047/43.18*55.88=X/21.59*27.94=0.01179
then we do the same;
0.01179lb(453.6g/1lb)=5.349
(*the number is bigger but we have 4 sig figs*)
Fish oil in your diet will improve your memory. Independent variable? Dependent variable
what is base rule of rounding off
Which structure is represented by letter B?
Choose 1 answer:
(Choice A) A Cytosol
(Choice B) B Cell membrane
(Choice C) C Ribosome
(Choice D) D Cell wall
Answer: A Cytosol
Explanation: Jelly - like fluid that fills the space between cell organelles. Hoped This Helped :) Have a blessed day.
The cytoskeleton, which gives a cell its structure, allows organelles to move inside the cell, and provides a method by which the cell itself can move, is an ordered framework of fibrous molecules found in the cytoplasm. Thus, option A is correct.
What is the main function of cytosol in the cell?The fluid that fills cells is called cytosol. In this water-based solution, organelles, proteins, and other cell components float. Any cell's cytosol is a sophisticated solution whose characteristics allow for the performance of life's essential processes.
The cytoplasm houses all the organelles found in eukaryotic cells, including the nucleus, endoplasmic reticulum, and mitochondria.The portion of the cytoplasm that is not contained in an organelle is known as the cytosol.
Therefore, Although the cytoplasm may not seem to have any shape or organization, it is actually quite well-organized.
Learn more about cytosol here:
https://brainly.com/question/2398768
#SPJ2
The Flash can travel 400 m in just 5.2 minutes. What is his average velocity in m/s?
Answer:
76.9231
Explanation:
Divide 400m by 5.2 to get the answer.
Speed = (distance) / (time to cover the distance)
Speed = (400 m) / (5.2 minutes)
Speed = (400 m) / (312 seconds)
Speed = 1.28 m/s
There's not enough given information to find his velocity.
(I'll be honest with ya, Flash: 1.28 m/s is no big deal. It's only about 2.87 miles per hour. My dog can walk faster than that, and so can most healthy people. If that's the best you can do, then you probably shouldn't be running around chasing bad guys.)
Which of the following is NOT a piece of evidence for the Big Bang Theory?
Ratio of Hydrogen and Helium to other elements
Expanding Universe
Black Holes
Cosmic Microwave Background Radiation
um the answer is A
np :3 i hope this is right
why aren't two hydrogen atoms bonded together considered a compound explain.
Answer: Because a compound is formed by at least two elements, and here we have only one.
Explanation:
A compound is defined as:
"A substance that is formed when two or more elements are chemical bonded together"
And in this case, we have two hydrogen atoms bonded together, so we have the bond, but there is only one element, and we need to have at least two elements to have a compound.
Two hydrogen atoms bonded together are not considered a compound.
Compounds:A compound is formed when two are more different elements form a chemical bond with each other and make a substance.
For any substance to be categorized as a compound it is necessary that it contains at least two different elements.
A substance that is formed by the chemical combination or bonding of the atoms of the same element is not considered a compound.
In the given case we have two hydrogen atoms bonded together, which is very clear that the substance contains the atoms of the same element bonded together.
Therefore it can not be considered a compound.
Learn more about compounds:
https://brainly.com/question/24972577?referrer=searchResults
An object traveling at a constant 20m/sec in a circular path is changing its:
My answer to the question is Velocity.
what are different type of plastids explain them?
Answer:
types of plastids
chloroplasts
chromoplasts
gerontoplasts
leucoplasts
Explanation:
ans
How do you think the mass of an object affects how much friction get exerted on the object by a rough surface?
Explanation:
Friction can't affect mass of a substance(considering for a substance whose mass doesn't change with time),rather it is the mass of an object which can affect friction variously. Let's take some example to understand the situation. So,higher the mass of the object,higher will be the frictional force.
Friction occurs because no surface is perfectly smooth. Rougher surfaces have more friction between them. Heavier objects also have more friction because they press together with greater force. Friction produces heat because it causes the molecules on rubbing surfaces to move faster and have more energy.
Which statement is supported by the motion map?
The train traveled south and then north.
The train moved at a velocity of 75 mph north.
The train had a greater velocity when it moved away from the origin.
The train stopped for 3 seconds.
Answer:
The train stopped for 3 seconds.
Explanation:
D on edge
Driving at 75 m/s, you hit the brakes on your new car, accelerating at
a rate of -20 m/s2. How much time will it take the car to come to
rest?
Explanation:
initial velocity, u = 75m/s
acceleration, a = -20m/s2
final velocity, v = 0m/s (rest)
Using the formula,
v = u + at
0 = 75 + (-20)t
t = 3.75 seconds
What do all electromagnetic waves have in common?
They can travel at the speed of light.
O They have the same wavelengths.
O They travel only through matter.
O They have nonmoving magnetic fields.
Answer: A they can travel at the speed of light
Explanation: A on EDGE
Answer:
a
Explanation:
got 100
3. A rock has a volume of 6 cm3 and a mass of 24g. What is the density of the rock?
Explanation:
Assume that the rock has a constant density,
then the density = volume/mass = 0.25g/cm^3.
Answer:
4 g/cm^3
Explanation:
Density can be found by dividing the mass by the volume.
d=m/v
We know that the mass of the rock is 24 gram. We also know the volume of the rock is 6 cubic centimeters.
m=24 g
v= 6 cm^3
Substitute the values into the formula and divide.
d= 24 g / 6 cm^3
d= 4 g/cm^3
The density of the rock is 4 grams per cubic centimeter.
What is the closed physical system?
A. Non of the answers are true
B. A system where matter and energy can leave but not enter the system
C.a system where matter and energy can leave but not enter the system
D. A system where matter and energy can not enter or leave the system
what is the difference between an ideal machine and a practical machine
Answer:
Ideal machines are said to have parts which are weightless , frictionless and strings if any are inextensible. Practical machines have parts which have weights, friction and it causes some loss of work done.
Explanation:
Answer: Ideal machines are said to have parts which are weightless , frictionless and strings if any are inextensible. Practical machines have parts which have weights, friction and it causes some loss of work done.
Explanation:
A brick has a mass of 562 g and a volume of 43 cm3. What is the density?
Answer:
13.069 g/cm^3
Explanation:
to get density, simply divide the mass by the volume. Your equation would look like this; p=562/43
'P' represents density in this equation. Never forget to add your units!
Hope this helps!
The image shows the pH value of some common substances. Which statement is true?
A-Pure water is acidic
B-Pure water is basic
C-Pure water is both acidic and basic
D-Pure water is neither acidic nor basic
An object is released from rest near a planet’s surface. A graph of the acceleration as a function of time for the object is shown for the 4 s after the object is released. The positive direction is considered to be upward. What is the displacement of the object after 2 s?
Answer:
the body has descended a height (4a)
Explanation:
This exercise should use the acceleration given in the graph, but unfortunately the graph is not loaded, but we can build it, using the law of universal gravitation and the fact that you indicate that the movement is near the surface of the planet
F = m a
f
orce is gravitational force
G M m / r² = m a
a = G M / r²
where G is the universal constant of gravitation, M the mass planet and r the distance from the center of the planet of radius R to the body, if we measure the height of the body from the surface of the planet (y), we can write
r = R + y
for which
a = G M/R² (1+ y/R)⁻²
if we use y«R we can expand the function in series
a = (G M /R²) (1 -2 y/R - 2 (-2-1) /2! y² / R² +…)
as the height is small we can neglect the quadratic term and in many cases even the linear term, for this exercise we will remain only constant therefore the acceleration is constant
a = G M / R²
from this moment we can use the relations of motion with constant acceleration for the exercise
a) they ask us for the position for t = 2s
y = y₀ + v₀ t - a t²
as the body is released v₀ = 0
y-y₀ = - a t²
y-y₀ = - a 2²
y-y₀ = - a 4
therefore
therefore the body has descended a height (4a) where a is the acceleration of the planet's gravity
The x-component is 8 m/s east; the y-component is 14.5 m/s North. (a) What is the value of the resultant vector? (b) What is the angle of the resultant vector?
Explanation:
Given that,
The x-component is 8 m/s east and y-component is 14.5 m/s North.
(a) As both x and y components are perpendicular to each other. Their resultant is given by :
[tex]R=\sqrt{x^2+y^2} \\\\R=\sqrt{(8)^2+(14.5)^2} \\\\R=16.56\ m/s[/tex]
(b) Let [tex]\theta[/tex] is the resultant vector. So,
[tex]\tan\theta=\dfrac{y}{x}\\\\\theta=\tan^{-1}(\dfrac{y}{x})\\\\\theta=\tan^{-1}(\dfrac{14.5}{8})\\\\\theta=61.11^{\circ}[/tex]
Hence, the resultant is 16.56 m/s and the angle of the resultant vector is 61.11 degrees.
Will somebody plz help
Answer:
very complex
Explanation:
The answer is D very complex
A motorcycle travels at 6.0 m/s. After 3.0 seconds, the motorcycle travels at 15.0 m/s.
Which of the following was the average acceleration of the motorcycle?
The average acceleration of the motorcycle is determined as 3 m/s².
Acceleration of the motorcycle
The acceleration of the motorcycle is calculated as follows;
a = (v - u)/t
where;
v is the final velocityu is the initial velocityt is time of motiona = (15 - 6)/3
a = 3 m/s²
Thus, the average acceleration of the motorcycle is determined as 3 m/s².
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ2
A mass is measured as 6.2 kg in one experiment and as 6.20 kg in another. in what way do these measurements differ
Answer:
They are both same
Explanation:
6.20=6.2kg
What’s the difference between atoms and molecules in a substance?
Answer:
Atoms are single neutral particles.
example: Ne, O
Molecules are neutral particles made of two or more atoms bonded together.
example:O2,HCl
Answer:
Atoms are single particles while molecules are particles made of two or more atoms bonded together.
Explanation:
If Johnny won a 300 meter race in 40 seconds, his speed would be ?
Formula: s = d/t
s = speed
d = distance
t = time
Solve using the values we are given.
s = 300/40
s = 7.5m/s
Best of Luck!
Answer:
7.5 m/s
Explanation:
An ant crawled from a hole to the food. For the first 6
minutes, it travelled at an average speed of 15 m/min. For
the next 9 minutes, it travelled at an average speed of 10
m/min. What was the average speed of the whole journey?
m/min
Answer:12
Explanation:Average speed=Total Distance divided by Total Time.
When deciding antenna types, why might the use of an omnidirectional antenna be inadvisable?
Answer:
Omnidirectional antennas are inadvisable to be used because when oriented vertically they radiate radio power equally in all horizontal directions, but heir radio power varies with the angle to the axis, reducing to zero at the axis.
Explanation:
Omnidirectional antennas radiates equal radio power in all directions perpendicular to an axis, with power varying with the elevation angle. This means that their power declines to zero on the axis. This is unlike the isotropic antennas that radiates equal power in all directions, without any reduction in radio power with angle to the axis. Omnidirectional antennas are mostly used for radio broadcasting antennas in mobile devices that use radio such as cell phones, FM radios, walkie-talkies, wireless computer networks etc.
Same amount of force is acting on car and bus.If the ratio of the bus and car 25:1 calculate the ratio of the acceleration produced in the car to the acceleration produced in the bus
Answer:
1:25
Explanation:
The force acting on an object is given by :
F = ma ...(1)
m is mass and a is acceleration
It is given that the ratio of force acting on the bus and car 25:1 i.e. [tex]\dfrac{F_1}{F_2}=\dfrac{25}{1}[/tex], 1 is for bus and 2 is for car.
We need to find the ratio of the acceleration produced in the car to the acceleration produced in the bus. From equation (1),
[tex]\dfrac{F_1}{F_2}=\dfrac{a_1}{a_2}[/tex]
[tex]\dfrac{a_2}{a_1}=?[/tex]
[tex]\dfrac{F_1}{F_2}=\dfrac{1}{25}[/tex]
So, the ratio is 1:25.
10.What is the Kinetic Energy of a 150 kg object that is moving with a speed
of 15 m/s? (7b)