How many electrons can be described by the following quantum numbers: n=2, 1=-1, m-1.

Answers

Answer 1

Answer:

6 electrons

Explanation:

The principal quantum number n; describes the energy level and here, it is 2.

The azimuthal or secondary quantum number l is given as 1, we are describing the p-orbital

The magnetic quantum number is -1, and we have 3 sub-orbitals here:

   It is a 2p-suborbital

So; in each sub orbital we have 2 electrons

The number of electrons that can be described here  =  2 x 3 = 6 electrons.


Related Questions

List the following compounds in order of increasing reactivity in an SN2 reaction.
A. 2-Bromo-2-methylbutane, 1-Bromopentane, 2-Bromopentane
B. 1-Bromo-3-methylbutane, 2-Bromo-2-methylbutane, 2-Bromo-3-methylbutane
C. 1-Bromobutane, 1-Bromo-2,2-dimethylpropane, 1-Bromo-2-methylbutane, 1-Bromo-3-methylbutane

Answers

Answer:

A- 1-Bromopentane

>2-Bromopentane> 2-Bromo-2-methylbutane

B- 1-Bromo-3-methylbutane>2-Bromo-3-methylbutane> 2-Bromo-2-methylbutane

C- 1-Bromobutane > 1-Bromo-3-methylbutane>1-Bromo-2-methylbutane>1-Bromo-2,2-dimethylpropane

Explanation:

We must bear in mind that the ease of SN2 reaction is methyl > primary> secondary> tertiary.

As a result of this all primary alky halides react faster towards SN2 than secondary and tertiary alkyl halides.

Also, compounds that may form more stable carbocations by 1,2- alkyl shifts are less likely to participate in SN2 reaction

Tim and Jose are moving furniture. Tim pushes a 150 kg sofa with 300N
force. As a result, Sofa’s acceleration was __________ according to Newton’s
Second Law of motion. (F = ma)

Answers

Answer:

a = 2m/s²

Explanation:

Given data:

Mass of sofa = 150 Kg

Force applied = 300 N

Acceleration = ?

Solution:

Formula:

F = ma

F = force

m = mass

a = acceleration

by putting values,

300 N = 150 Kg × a

a =  300 N /150 Kg

a = 300 Kg m/s² / 150 Kg   ( N = Kgm/s²)

a = 2m/s²

17. Find the average atomic mass unit of silicon given the following isotopes and
abundances: Silicon-28, Silicon-29, Silicon-30 with masses of 27.977, 28.976,
29.974, respectively. The percent abundance of the silicon isotopes is 92.2%, 4.7%
and 3.1%, respectively. Periodic table and it’s trends

Answers

The average atomic mass unit of Silicon : 28.0774

Further explanation

Given

Isotopes of Si(Silicon-28, Silicon-29, Silicon-30)

Required

The average atomic mass

Solution

Isotopes are elements that have the same Atomic Number (Proton)

Atomic mass is the average atomic mass of all its isotopes

Avg. atomic mass = %mass.isotopes 1 + %mass.isotopes 2...etc

Input the values :

Avg atomic mass = (0.922 x 27.977) + (0.047 x 28.976) + (0.031 x 29.974)

Avg atomic mass = 28.0774

What type of air mass is usually associated with hurricanes?

Answers

Answer:

Hurricanes conditions occur when warm, moist air evaporates from the surface of the ocean and rises quickly. This warm air meets cool air in the higher elevations that causes condensation of the warm air vapor. The condensation turns into storm clouds that make up hurricanes.

Bowling with a volleyball instead of a bowling ball. Will this make it easier or harder to knock over pins?

Answers

Answer:

Definitely harder, since volleyballs are nowhere near as heavy as bowling balls, it’ll be harder too since there wont be much force to knock over pins

I need help. Please help with the best of your ability.​

Answers

Answer:

Photosynthesis transforms light energy into chemical energy by making sugars. Cellular respiration releases the chemical energy from food by breaking down sugars.

Explanation:

I'm actually learning this in school right now

Hope this helps!

~PurpleMist

Which statement best describes the polarity of SF 4 CI 2?
Always polar , always non polar or depending on the arrangement of outer atoms ?

Answers

Answer:

use common sense!........

Each graph below represents a different type of electromagnetic wave. Which graph most likely illustrates radio waves?

Answers

Answer: the answer is c

Explanation:

I just did the test

Each graph below represents a different type of electromagnetic wave. Then graph C most likely illustrates radio waves.

What is electromagnetic wave ?

The electromagnetic field's waves, which travel through space and convey electromagnetic radiant energy, are what make up electromagnetic radiation. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.

There are seven different kinds of them are X-rays, gamma rays, visible light, infrared light, radio waves, and microwaves. They may be compared to seven distinct types of light.

Lower frequency electromagnetic radiation than microwaves is referred to be a radio wave. Radio waves have wavelengths that range from tens of thousands of meters to 30 centimeters. These are equivalent to frequencies between 3 Hz and 1 GHz (109 Hz).

Thus, option C is correct.

To learn more about electromagnetic wave follow the link;

https://brainly.com/question/3101711

#SPJ2

Select the correct balanced equation for the combustion of methane.
CH4 + 02 -> CO 2 + H2O

Answers

Answer:

A: CH4 + 2O2 -> CO2 + 2H2O

Explanation:

CH4 + O2 -> CO2 + H2O

Count how many elements they are in all molecules for the reactants and for the products.

For the reactants:

C = 1 element

H = 4 elements

O = 2 elements

For the products:

C = 1 element

O = 2 elements

H = 2 elements

O = 1 element

2 oxygen atoms + 1 oxygen atoms = 3 oxygen atoms total on the products side.

To balance this equation, we need to add 2 more elements of hydrogen and 2 more elements of oxygen. Therefore, we add a 2 to the coefficient of O2 for the reactants side and add a 2 to the coefficient of H2O for the products side.

Now let us try it.

CH4 + 2O2 -> CO2 + 2H2O

Count how many elements they are in all molecules for the reactants and products.

For the reactants:

C = 1 element

H = 4 elements

O = 4 elements

For the products:

C = 1 element

O = 2 elements

H = 4 elements

O = 2 elements

2 oxygen atoms + 2 oxygen atoms = 4 oxygen atoms total on the products.

All of the elements are balanced.

So the final answer is A: CH4 + 2O2 -> CO2 + 2H2O

Hope it helped!

An increase in aurora activity on Earth could be related to what activity on the Sun?
O A decrease in prominence
B decrease in solar Fares
Oc decrease in speed of solar wind
D increase in speed of solar wind
E increase in sun spots

Answers

Answer:

D.

Explanation:

INCREASE OF SOLAR WINDS When the sun is more active


Calculate the molar mass of NH4NO3.
molar mass of NH4NO3 =
g/mol

Answers

Answer:

67g/mol

Explanation:

The given compound is:

          NH₄NO₃ :

Problem here is to find the molar mass of the compound.

 Now;

The molar mass is the sum of the atomic masses of the elements in the compound.

   Atomic mass of N  = 14g

   Atomic mass of H  = 1g

   Atomic mass of O  = 16g

So;

   Molar mass = 14 + 4(1) + 1 + 3(16) = 67g/mol

Answer:

the answer is 80.0 grams per mole

Explanation:

John Dalton determined that the concept of atoms could be used to describe matter.
Which of the following is FALSE regarding John Dalton's four points about atomic theory.
A. Atoms are very small indivisible, indestructible particles.
B. Chemical compounds form when two or more kinds of atoms combine.
C. All matter is made up of atoms.
D. All molecules are identical in mass and other properties.

Answers

Answer:

D

Explanation:

I don't exactly remember his four points, but the D. is just not true anyway. For example, a molecule of water (H20) does that have the same properties or mass as Nitrogen dioxide or sulfer dioxide or something else

Answer:

The answer is D

Explanation:

As it is true that molecules are identical in mass.

In table below, there are descriptions of an experiment on samples of three different chemical compounds. Decide whether the compound is ionic or molecular, if you can. If there is not enough information to decide, choose can't decide in the third column.
Compound Description Ionic or molecular?
can't decide
1 Compound 1 is a hard grayish-white solid. A small 250. mg
sample of it is put into a quartz tube and heated strongly.
It starts to melt at 1055. °C.
2 Compound 2 is a hard grayish-white solid. When tapped
gently with a small hammer, a sample fractures into
fragments and a whitish powder. The powder is soluble in
water, and when 15 g are dissolved in 100 mL of water,
the solution conducts electricity well.
3 Compound 3 is a soft waxy white solid that can be easily
shaped and molded by hand. When the flame of an ordinary
laboratory burner is held about 10 cm away from the solid,
it rapidly and extensively melts into a clear liquid.

Answers

Answer:

Compound 1- ionic solid

Compound 2- can't really decide

Compound 3- molecular solid

Explanation:

An ionic solid has a very high melting point. It is hard but not brittle. It's solution or melt but not it's solid conducts electricity. Compound 1 is an ionic solid.

We can't really decide on compound 2 since it is brittle yet it's solution conducts electricity.

Lastly, compound 3 is a molecular solid since it has a low melting point.

Answer:

Compound 1- ionic solid

Compound 2- can't really decide

Compound 3- molecular solid

Explanation:


4NaOH + 4HCI - NaCl + H20

Answers

Answer:

NaOH + HCl —> NaCl + H₂O

Explanation:

From the question given above, we obtained the following equation:

4NaOH + 4HCl —> NaCl + H₂O

The equation can be balance as follow:

4NaOH + 4HCl —> NaCl + H₂O

There are 4 atoms of Na on the left side and 1 atom on the right side. It can be balance by putting 4 in front of NaCl as shown below:

4NaOH + 4HCl —> 4NaCl + H₂O

There are a total of 8 atoms of H on the left side and 2 atoms on the right side. It can be balance by putting 4 in front of H₂O as shown below:

4NaOH + 4HCl —> 4NaCl + 4H₂O

Next, divide through by 4 to express the equation with the lowest coefficients.

NaOH + HCl —> NaCl + H₂O

Now the equation is balanced.

NOTE: Smallest coefficients are always used to represent a balanced equation.

Explain how you could use displacement reactions to distinguish between
iron and zinc. You may use any solutions
you
choose.

Answers

Answer:

A double displacement reaction is a type of reaction in which two reactants exchange ions to form two new compounds. Double displacement reactions typically result in the formation of a product that is a precipitate.

Explanation:

zinc is more reactive than iron because it displace iron from its solution

Which element is more reactive in water?

-Na

-Mg

Answers

Answer:

sodium

Explanation:

sodium is the second most reactive. Magnesium being the least reactive

Answer:

cesium

Elements with the Highest Reactivity

Francium is radioactive, with no stable isotopes. The most chemically reactive metal with a stable isotope is cesium. Cesium reacts explosively with water

Explanation:

6
The volume of a gas increased from 2 to 6 L while the temperature was held constant. The
pressure of the gas:
increased by a factor of 3
decreased by a factor of 3
increased by a factor of 4
decreased by a factor of 4

Answers

Answer:

If the volume of a gas increased from 2 to 6 L while the temperature was held constant, the  pressure of the gas decreased by a factor of 3.

Explanation:

Boyle's law that says "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure." This means that if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.

Boyle's law is expressed mathematically as:

Pressure * Volume = constant

or

P * V = k

To obtain the proportionality factor k you must make the quotient:

[tex]k=\frac{V2}{V1} =\frac{6 L}{2 L}[/tex]

k= 3

This means that if the volume of a gas increased from 2 to 6 L while the temperature was held constant, the  pressure of the gas decreased by a factor of 3.

How does Bromine make it's escape.

Answers

Answer:

So, when bromine comes near the ethylene pi bond, it attacks the electron and grabs it, but the second bromine steals it away and departs as Br-. After all, bromine is more electronegative than carbon; the first bromine is just a link in the chain of events that allows the second bromine to escape with an electron.

[2071]State and explain Kohlrusch's law.
(2071]Why does the specific conductance decreases and equivalent conductance increase
with dilution of a solution of electrolyte?
ito unit How does it Vary with dilution?
1101​

Answers

I have no idea how about it lol I t

Trey was asked to build a working model of a landform for a science project. He chose to build a model of a volcano.
Trey formed a base out of clay and then painted the model so it resembled a cinder cone volcano.
Finally, Trey mixed baking soda, vinegar, and red food coloring in the base, so it mimicked lava flowing out of the volcano. Once
he was finished with his project, Trey's teacher asked how useful his model was.
What factor best determines the usefulness of the model?
A. how closely the model's color matches the real world
how closely the model's behavior matches the real world
C. how closely the model's size matches the real world
how closely the model's composition matches the real world
B.
D.

Answers

Can you please give me more details so I can help you

Answer:

The answer is "how closely the model's behavior matches the real world "

Explanation:

Your options were glitched out, so it only showed A and C, and B and D were blank so lol

What type of weather typically results from a low pressure system?
I need help!!!!

Answers

Answer:

Storms and hurricanes can be formed with low pressure. It always results into unsettled weather.

Explanation:

Hope this helps!

ways of expressing a solution​

Answers

Answer:

There are several ways of expressing the concentration of a solution.

Explanation:

Concentration is the proportion of a substance in a mixture. There are several ways of expressing them, each with their own usefulness. What's incredibly useful is with a little math and conversion factors, these can all be interconverted.

Molarity (M) - amount (mol) of solute / volume (L) of solutionPros: Very common in labs, makes conversions easy. Cons: Effected by temperature (liquid expands with heat so unit volume of hot solution has less solute than cold solution) and mixing (volumes are not always additive (for instance, 50 mL of water and 50 mL of ethanol is not exactly 100 mL of mixture due to solvent-solvent interactions).Molality (m) - amount (mol) of solute / mass (kg) of solventPros: Preferred when temperature and density could change; molal is based on masses, not volume so molality does not change with temperature. Masses, unlike volumes sometimes, are always additive.Cons: When dealing with moles in reactions conversions are harder.Parts by mass a.k.a mass % (% w/w) - mass of solute / mass of solutionPros: Good indication of how pure a substance is; and good for very small concentrations such as toxin or pollutant levels in a biological or environmental setting, respectively.Cons: Not the most useful for reaction stoichiometry.Parts by volume a.k.a volume % (%v/v) - volume of solute / volume of solutionPros: Very good and common for measuring main ingredients in things, such as alcohol in hand sanitizer, hydrogen peroxide in those brown bottles you see, and how much alcohol in wine bottles.Cons: Again, not the easiest to use for reaction stoichiometry.Mole fraction (X) - amount (mol) of solute/ amount (mol) of solute + amount (mol) of solvent Pros: N/ACons: N/AMass per volume percentage - mass of solute / volume of solutionPros: Common for measuring main ingredients in medicine, such as how much of it is in an aqueous solution (example: benzocaine)Cons: Difficult to use with stoichiometry.Parts per million and parts per billion (ppm or ppb) - mass of substance  / mass of sample * 10^6 or 10^9Pros: Excellent for expressing concentrations of very trace components such as a toxin or pollutant in blood, for example. Cons: Not very useful for large quantities of things.

Note: to find the percent of some of these, such as for mass percent or volume percent, multiply the result by 100.

Additionally, with some practice you can answer a question such as, "The label on a 0.750-L bottle of Italian chianti says "11.5% alcohol by volume." How many liters of alcohol does the wine contain?". etc...

I really hope this helps! Take care.

Suppose that for a hypothetical reaction: A2(g) + 3B2(g) 2AB3(g) It is determined that at a certain temperature the equilibrium concentrations are [A2] = 0.0055, [B2] = 0.763 and [AB3] = 7.6×10-4. Calculate the numerical value of K for the reaction.

Answers

Answer:

The numerical value of K for the reaction is 2.36*10⁻⁴

Explanation:

A chemical equilibrium is a reaction that is never completed, since it occurs simultaneously in both directions (the reactants form products, and in turn, these form reactants again). In other words, it is a dynamic balance. When the concentrations of each of the substances involved (reactants or products) stabilize, that is, they are spent at the same rate as they are formed, chemical equilibrium is reached.

The equilibrium constant (Kc) is expressed as the ratio between the molar concentrations of reactants and products. Its value in a chemical reaction depends on the temperature, so this must always be specified.

Being:

aA + bB ⇄ cC + dD

then the constant Kc is:

[tex]Kc=\frac{[C]^{c} *[D]^{d} }{[A]^{a} *[B]^{b} }[/tex]

In the case of the reaction:

A₂(g) + 3 B₂(g) ⇒ 2 AB₃(g)

The constant Kc is:

[tex]Kc=\frac{[AB_{3} ]^{2} }{[A_{2} ] *[B_{2} ]^{3} }[/tex]

Being:

[AB₃]=7.6*10⁻⁴[A₂]= 0.0055[B₂]= 0.763

and replacing, you get:

[tex]Kc=\frac{(7.6*10^{-4} )^{2} }{0.0055 *(0.763)^{3} }[/tex]

Kc=2.36*10⁻⁴

The numerical value of K for the reaction is 2.36*10⁻⁴

which toxic gas is released in incomplete combustion?

Answers

Answer:

Incomplete combustion produces carbon monoxide (CO), a toxic gas.

Explanation:

Combustion is the rapid chemical reaction of oxygen in the air or direct oxygen, which is defined as oxidizer, with the different elements that make up the fuel (mainly carbon (C) and hydrogen (H)). These chemical reactions release energy producing local increases in temperature, which causes a flow of heat to the outside.

In other words, on the one hand you have the fuel, which is the substance that oxidizes and that you can find in a solid, liquid or gaseous state and which is made up mostly of carbon and hydrogen.

The oxidizer, for its part, is the substance that oxidizes the fuel, and it is generally the oxygen found in the air.

Certain amounts of oxidizer and fuel must come into contact for combustion to occur.

Incomplete combustion occurs when part of the fuel does not fully react. Incomplete combustion produces carbon monoxide (CO), a toxic gas.

What property is not a characteristic of metals? Brittle Shiny Ductile Malleable ​

Answers

Answer:

brittle is not a characteristic of metals

Answer:

Brittle

Explanation:

Brittle substances break easily and this is property of non metals.

Which of the following is one stage of the cell cycle?
A. Cytokinesis
B. Multiplication
C. Photosynthesis
D. Respiration

Answers

Answer: A

Explanation: cytokinesis is in the M phase.... Mitosis is followed by cytokinesis (cell separation)

Answer:

A. Cytokinesis

Explanation:

B. doesn't make sense it's for math

C. Is for plants not cells

D. is the action of breathing

So, A is the most likely answer.

Hope I helped!

What do u notice about the molecules before and after the chemical reaction

Answers

Explanation:

In a chemical reaction, the atoms and molecules produced by the reaction are called products.

In a chemical reaction, only the atoms present in the reactants can end up in the products. No new atoms are created, and no atoms are destroyed.

In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.

When fat comes in contact with sodium hydroxide, it produces soap and glycerin. Determine whether this is a physical change or a chemical change. Explain your

Answers

Answer:

It is a chemical change

Explanation:

The combination of sodium hydroxide and fat yields soap and glycerine.

We have to remember that one of the characteristics of a chemical change is that new substance(es) is/are formed. We have to look out for this when considering any process.

We can see here that new substances were formed (soap and glycerine). Based on this, we can assert that a chemical change has taken place.

A chemist prepares a solution of silver (I) perchlorate (AgCIO4) by measuring out 134.g of silver (I) perchlorate into a 50.ml volumetric flask and filling the flask to the mark with water. calculate the concentration in mol/L of the silver (I) perchlorate soluation

Answers

Answer:

13 M

Explanation:

Molar mass of AgCIO4 = 207 g/mol

Number of moles of AgCIO4= 134/207= 0.65 moles

Number of moles= concentration × volume

Concentration = number of moles/volume

Concentration = 0.65 × 1000/50 = 13 M

the man is being warmed by?
radiation
convention
conduction

Answers

Answer:

Comvection

Explanation:

The movement causes the density to rise and therefore transfer more heat

Other Questions
Describe 2 medical problems that can be associated with this body system.(name the medical problem how it begins, how it affects the body and ways to prevent the problem). Find a number, twice of which decreased by 7 gives 65. which two expressions are equivalent?A) 5x-5 and 5(x-5)B) 5(x-5) and 5x-25C) 5x-1 and 5(x-5)D) 5x(x-1) and 5x-5I need help asap thank you :) this got me all confused ^^'appreciate it if you help me....but if you cant thats ok! Have a great day either way^^ not going to give away how much points im giving because le point theifs might come but please assist me.((B.TW the horizantal line is always labeled offense A car battery provides a voltage of 12 V to a vehicle. If 32 A ofcurrent are drawn on a hot summer evening when the air conditioningand lights are running, what is the resistance provided by theelectrical elements of the car?A. 44 OhmsB. 20 OhmsC. 2.6 OhmsD. 0.375 Ohms PLS HELP!! WILL GIVE BRAINLIEST!!! WORTH 10 PTS!!! What kind of education did Benjamin Franklin suggest in his "Proposals Relating to the Education of Youth in Pennsylvania"? In a short story, a factory owner becomes wealthy bymanufacturing parts for weapons. He has manyemployees who work long hours for little pay. One day, theman takes a walk in the forest and is overcome by thebeauty of the trees and the sense of isolation from the restof the world. He decides to sell his factory and take a jobas an innkeeper in the countryside.Which element of the story most clearly identifies it as an example ofRomantic literature? Which of these is an example of irony from "The Open Window" by Saki?A. Mr. Nuttel is supposed to be undergoing a nerve cure, but his nerves are worse after visiting Mrs. Sappleton.B. Mr. Nuttel's sister gives him letters of introduction to some of the people who live in the town he visits.C. Mr. Nuttel is annoyed that Mrs. Sappleton wasn't better prepared for the visit.D. Mr. Nuttel is afraid of dogs because he was once chased into a cemetery by a pack of dogs.E. Mrs. Sappleton is annoyed that Mr. Nuttel can only talk about his ailments.PLEASE HELPPP!!! I'M MARKING BRAINLIST Consider the reaction below.2 Na + O2 Na2O2If 10.0 g of sodium metal reacts with excess oxygen gas how many grams of sodium oxide will be produced?Show your work below. Make sure to show ALL units and each step of the process: What is a good introduction for the Steve Jobs essay. for the 6th grade Which number on this map marks the area of colonial North America controlled by France around the year 1700? 7.Find the smallest non-zero whole number whichcan be multiplied by 112 to give a cube number. Bronwyn walks one lap of an oval at 2.5 km/h and then jogs another eight laps of theoval at 5 km/h. If it takes her 30 minutes in total, how long in metres is each lap? Plz help me PlzThe letters X and Y represent missing events. Which option correctly replaces the letters X and Y?in X, the homologous chromosomes separate, which increases genetic diversity because of Y.OX: anaphaseY: independent assortmentOX: anaphase 11Y nondisjunctionOx prophase 1Y nondisjunctionOX: prophase 11Y crossing over Plz help me get the right answer 20. Why do societies establish governments?A To pass on cultural norms to new generationsB. To maintain law and orderC. To express religious beliefsD. To enable the trading of goods between people PLS HELP MEEEEEEEEEE :( What can you say about the two figuresA.The two figures are congruent but not similar.B.The two figures are not similar or congruent.C.The two figures are similar and congruent.D.The two figures are similar but not congruent. Read the excerpt from Roll of Thunder, Hear My Cry. When I reached the church steps, I looked back again. T.J. was still there, an indistinct blur blending into the gathering dusk, and I began to think that perhaps he would not go with the Simmses. But then the rude squawk of the truck's horn blasted the quiet evening, and T.J. turned his back on us and fled across the field. Which best describes the tone of the excerpt? A. relaxedB. proud C. disappointed D. unconcerned