How many chlorine atoms are there in 100 g of carbon tetrachloride

A description of an achiral molecule as having optical activity when it interacts with plane-polarized light is accurate.

A few of examples of achiral compounds are (meso)-2,3-dibromobutane and trans-1,2-dichloro-1,2-ethanediol.

They rotate the polarized light plane in the same direction and by the same amount, but in different directions. The polarized light plane is rotated in the same direction and by the same amounts. The melting point and boiling point are among the physical characteristics shared by a pair of enantiomers. Meso compounds are numerous chiral centers in achiral molecules.

To know more about achiral molecule visit :-

https://brainly.com/question/29538062

#SPJ4

If protons (H+) were able to freely move across the mitochondrial membrane, cellular respiration will not occur.

Mitochondria are encased in a double-membrane system made up of inner and outer mitochondrial membranes separated by an intermembranous space. The inner membrane has numerous folds (cristae) that extend into the organelle's interior. In the critical process of oxidative phosphorylation, the electrochemical proton gradient across the inner mitochondrial membrane drives ATP synthesis. This is made possible by the previously mentioned membrane-bound enzyme ATP synthase.

The electron transport chain creates a proton gradient across the inner mitochondrial membrane, causing chemiosmosis to drive ATP synthesis. The proton gradient across the cristae membrane is produced by three large membrane protein complexes of the respiratory chain in the cristae, known as complexes I (NADH/ubiquinone oxidoreductase), III (cytochrome c reductase), and IV (cytochrome c reductase) (cytochrome c oxidase).

To learn more about mitochondrial membrane, here

https://brainly.com/question/1602075

#SPJ4

Answer:

If an element has 3 valence electrons, it means that it can form chemical bonds with other atoms by sharing or transferring those 3 valence electrons. The resulting compound will have a chemical formula and properties that depend on the specific elements involved in the bonding and the arrangement of the atoms in the compound. Some elements with 3 valence electrons include boron (B), aluminum (Al), and phosphorus (P). These elements are commonly found in compounds such as borax (Na2B4O7), alum (KAl(SO4)2), and phosphoric acid (H3PO4), respectively.

(A): Bluish-gray in color, (C): begins to melt at 419.58 degrees Celsius,and (E): has a density of 7.13 g/mL are classified as intensive properties of zinc; while (B): has a mass of 63.74 g, and (D): has a volume of 8.94 mL are characterized by extensive properties of zinc.

An intensive property is a property of matter that is dependent only on the type of matter in a certain sample and not on the quantity. Color, density, solubility, and temperature are examples of intensive properties. On the other hand, an extensive property refers to a property that depends on the quantity of matter in a sample. Volume and are examples of extensive properties.

Answer to the question number 2 is as follows:

(A): The melting point of the sample and (B): the density of the sample help to determine if a given sample is really zinc.

You can learn more about intensive and extensive property at

https://brainly.com/question/13055036

#SPJ4

In titration of an unknown weak monoprotic acid,  equivalence point is reached when the acid (analyte) is completely neutralized by  base (analyte).

One mole of  acid produce one mole of acetate; so,

0.025 L acid x 0.1 mol base = 0.0025 mol

1 L soln

0.0025 mol  x 1 mol = 0.0025 mol

1 mol acid

So, what volume is the acetate i will, Not 35 mL you added a solution

of acid

how much base did we add? 1 mol acid for the 1 mole of  base

0.0025 mol CH₃CO₂H x 1 mol NaOH = 0.0025 mol NaOH

1 mol CH₃COOH

where did the NaOH come from? a 0.1 M NaOH solution

0.0025 mol of the  NaOH x 1 L of solution = 0.025 L of the NaOH

0.1 mol NaOH

so, total volume is

total voumel = volume of acid + vol titrant

vol = 0.025 L + 0.025 L = 0.050 L

So, the concentration is

0.0025 mol of acid

= 0.050 M

0.050 L

To know more about pH of solution , please refer:

https://brainly.com/question/172153

#SPJ4

Answer:ΔHvap is a positive quantity.

ΔHvap is the amount of heat required to vaporize 1 mole of a substance at its boiling point.

Both the boiling point and ΔHvap of a molecular substance are related to the strength of the intermolecular forces.

Explanation:

cuz im like that

The molar heat of vaporization for a substance describes  ΔHvap is the amount of heat required to vaporize 1 mole of a substance at its boiling point, ΔHvap is a positive quantity. Therefore, option A and B are correct.

The amount of heat needed to elevate 1 mole of a substance by 1 degree Kelvin is known as the molar heat capacity. Similar to specific heat capacity, molar heat capacity measures per mole rather than per gram of substance.

The amount of energy needed to raise the temperature of one gram of substance by one degree Celsius is known as an object's specific heat capacity. The quantity of energy needed to raise the temperature is known as the molar heat capacity.

One mole of that substance absorbs a certain amount of heat, known as the molar heat of vaporization. The magnitude of the intermolecular forces influences the values of the temperatures of fusion and vaporization.

Thus, option A and B are correct.

To learn more about molar heat, follow the link;

https://brainly.com/question/14805798

#SPJ12

The enzyme-substrate complex undergoes a conformational change, and the substrate is chemically modified by the enzyme.

An enzyme undergoes a conformational change when a substrate binds to its active site, bringing the substrate closer to the enzyme's catalytic site. The area of the enzyme where the chemical reaction takes place is called the catalytic site. The enzyme chemically alters the substrate at the catalytic site by transferring a chemical group or rupturing or forming chemical bonds.

One or more products are produced as a result of this chemical modification of the substrate. The enzyme is then free to bind and catalyze the reaction with additional substrate molecules after the product(s) have been released.

Learn more about conformational change here:

https://brainly.com/question/26381797

#SPJ4

Molecular geometry refers to how atoms are arranged within a molecule, typically in relation to a single center atom. Because the nitrogen is sp3 hybridized, it possesses four sp3 hybrid orbitals.

By taking into account both lone pairs and bond pairs, electron pair geometry can forecast the form of a molecule. By merely taking into account bond pairs, molecular geometry may predict the form of a molecule.

The nitrogen atom likewise hybridizes in the sp2 configuration, but unlike the carbon atom, it has a "lone pair" of remaining electrons that are not involved in the bonding. As a result, the geometry of nitrogen with three bonded ligands is trigonal pyramidal.

To know more about N2 sp2 hybridization visit:-

https://brainly.com/question/29607102

#SPJ4

Answer:

Electron configurations

Explanation:

answer

When E.coli treated at 160°F or 71°C temperature it gets denatured and dies. This will be helpful in pasteurization of foods.

For more information on E.coli kindly visit to

https://brainly.com/question/29778483

#SPJ4

Yes, for pure elements the Gibb's free energy is equivalent to 0.

The Gibbs free energy is a concept in chemistry specially of thermodynamics. The maximum amount of work that can be accomplished at a constant temperature and pressure by a closed system can be calculated using the Gibbs free energy (also known as Gibbs energy; symbol: denoted as delta G). Additionally, it offers a prerequisite for any processes like chemical reactions that might take place in such circumstances.

When a system achieves equilibrium without being pushed by an input electrolytic voltage, the Gibbs energy is the thermodynamic potential that is reduced. At the equilibrium point, its derivative w.r.t. the system's reaction coordinate vanishes.

To know more about free energy, click here,

brainly.com/question/13765848

#SPJ4

The components of the box model is transparent and does not take a background color is Margin

Whatever color is allocated to the container that the elements are in will be used as the margin color. Therefore, simply set the parent element's color as needed.

It requires a background color because the margin is completely transparent and lacks a background color. It is made clear what area the piece is in.

It is the area surrounding a component. On a page, margins can be used to move an element left, right, up, and down.

For such more question on transparent:

brainly.com/question/26975527

#SPJ4

The classification of the following species as aromatic, nonaromatic, or antiaromatic is attached.

Aromatic refers to a class of chemical compounds that have a cyclic rotation of (4n+2) electrons. These chemicals are significantly more stable than other compounds in their class. Where, n = 0,1,2,3.......

Anti-aromatic compounds are those that have a cyclic rotation of 4n+ electrons in their electronic configuration. The stability of these compounds is significantly lower than that of typical compounds.

The term "nonaromatic" refers to any other kind of compound outside aromatic ones. The classification of the given compounds according to the nature of the aromatic ring is attached as a picture.

The proper question is attached.

You can also learn about Aromatic compounds from the following question:

https://brainly.com/question/29579449

#SPJ4

Answer:

2

Mg has a molar mass of 24.3 g/mol. Hence, the number of atoms of Mg in 1.00 g is 2.

2.47 x [tex]10^{22}[/tex] atoms are there in 1.00 g. In chemistry, atoms are the fundamental building blocks of matter.

Atoms are the fundamental constituents of matter and the smallest units of an element that nevertheless retain its chemical characteristics. As they come together to create molecules, which then give rise to more complex structures, atoms are the subject of research in chemistry. Protons, neutrons, and electrons are the three primary subatomic particles that make up an atom. Neutrons have no charge, protons have a positive charge, and electrons have a negative charge. The quantity of protons determines an element's atomic number and establishes its identity.

Number of moles of Mg = (1.00 g) / (24.305 g/mol)

                                       = 0.0411 mol

Number of atoms = (0.0411 mol) x (6.022 x [tex]10^{23 }[/tex]atoms/mol)

                           = 2.47 x [tex]10^{22}[/tex] atoms

To know more about atoms, here:

https://brainly.com/question/1566330

#SPJ6

The four main sectors that contribute to carbon emissions are Energy, Industrial Processes, Agriculture, and waste.

These four sectors are responsible for the majority of GHG emissions globally. Reducing emissions in these sectors is essential for mitigating climate change and achieving net-zero emissions. This can be done through a variety of measures, such as increasing energy efficiency, transitioning to renewable energy sources, adopting more sustainable land use practices, and reducing waste.

Learn more about carbon emissions here:

https://brainly.com/question/1088517

#SPJ4

Interpret the IR spectrum of Diphenylmethanol.

Diphenylmethanol is an organic compound with the formula (C₆H₅)₂CHOH. Also known as benzhydryl, it is a white solid and the parent member of the large class of diary alcohols.

Infrared (IR) spectroscopy is a method that observes the interaction of molecules with electromagnetic radiation in the wavelength region of 0.75 – 1,000 µm or at wave numbers of 13,000 – 10 cm⁻¹

Learn more about the IR spectrum at https://brainly.com/question/21134950

#SPJ4

This observation illustrates the concept of a solution's solubility, which is the amount of solute that can be dissolved in a given amount of solvent at a certain temperature. In this case, the sugar is said to be highly soluble in water, as it was able to dissolve completely in the given volume.

Solubility is the property of a substance to dissolve in a solvent to form a homogeneous solution. It is a measure of the maximum amount of solute that can be dissolved in a given amount of solvent at a given temperature and pressure. Solubility is an important factor in many areas of science, including chemistry, pharmacy and environmental science.

This observation also shows that the sugar does not take up any additional volume when dissolved, as its molecules are small enough to disperse evenly throughout the solvent.

To know more about solubility click-

https://brainly.com/question/23946616

#SPJ4

The amount of daughter isotope that has been produced after 1, 2, 3, and 4 half-lives is 0.9375.

remaining after 1 half life = 1.0000/2 = 0.5000

remaining after 2 half lives = 0.5000/2 = 0.2500

remaining after 3 half lives = 0.2500/2 = 0.1250

remaining after 4 half lives = 0.1250/2 = 0.0625

For parent isotope:

In each half life the amount of remaining parent isotope will be half of the remaining of previous half life.

Therefore,

Parent present = 1.0000

present after 1 half life = 0.0000+ (1.0000 - 0.5000)=0.5000

present after 2 half lives = 0.5000+ (0.5000 -0.2500) = 0.7500

present after 3 half lives = 0.7500+ (0.2500 -0.1250) = 0.8750

remaining after 4 half lives = 0.8750+ (0.1250 - 0.0625)=0.9375

For daughter isotope:

The amount of daughter isotopes will be found by adding the value by which the number of parent isotope is decreased by in the relevant half life to the available daughter isotopes.

Daughter isotopes initially present: 0.0000

                        Daughter isotope         Parent isotope       Daughter to

                                 present                 remaining               parent ratio                                                                                

Starting state:           0.0000                1.0000                 0.0000/1.0000 =0

After 1 half life:          0.5000               0.5000                  0.5000/0.5000=1

After 2 half lives:     0.7500                0.2500                   0.7500/0.2500=3

After 3 half lives:     0.8750                0.1250                     0.8750/ 0.1250=7    

After 4 half lives:    0.9375               0.0625                     0.9375/0.0625=15

the amount of daughter isotope that has been produced after 1, 2, 3, and 4 half-lives is 0.9375.

and Ratio of the amount of daughter to the amount of parent isotope is 15.

For more such questions on Daughter isotope:

https://brainly.com/question/18420285

#SPJ4

The freezing point of pure benzene is 5.48 °C. The depression in freezing point is calculated to be 6.80. Thus, the freezing point of the 1.33 molal solution is  -1.32  °C.

Freezing point of a substance is the temperature at which its liquid state converts to its solid state where, the solid phase and liquid phase are in equilibrium.

The addition of a non - volatile solute to the solvent decreases the freezing point of the solution from that of the pure solvent. This decrease is a colligative property.

The depression in freezing point ΔTf = kf m

kf or depression constant of benzene = 5.12 °C /molal

freezing point of pure benzene = 5.48 °C

ΔTf = 5.12 °C /molal ×  1.33  = 6.80

Therefore, the freezing point of the 1.33 molal solution is :

T (soln) = 5.48 - 6.80 = -1.32 °C

To find more on freezing point, refer here:

https://brainly.com/question/2292439

#SPJ2

For N2 at 298 K, 0.071 fraction of molecules has a speed between 200 and 300 m/s.

Molecular speed is defined as the speed of a group of molecules in an ideal gas. The concept of molecular speed is critical in gas kinetic theory. According to the kinetic theory of gases, the molecules of a gas are constantly moving and follow a straight route until they collide with another molecule.

The speed of molecules in a gas is proportional to temperature and inversely proportional to the molar mass of the gas. In other words, when the temperature of a gas sample rises, the molecules accelerate, and so does the root mean square molecular speed. To determine a molecular speed, multiply three times the gas constant by the temperature, divide by the molar mass, and then square the result.

To learn more about molecular speed, here

https://brainly.com/question/28337877

#SPJ4

Your hands receive a heat transfer from the hot chocolate. Heat energy  is exchanged between two objects when their temperatures differ. When the two items reach the same temperature, the cooler object becomes warmer.

The vibrations of the hot chocolate's particles provide thermal energy. Some of this energy is transmitted from the chocolate to the milk's granules when you add cold milk to hot chocolate.

A fire emits thermal energy that warms a person's hands. One of the three ways that thermal energy can be delivered is by thermal radiation. Convection and conduction are the other two methods, both of which require matter to transfer energy.

To know more about Heat energy visit:-

https://brainly.com/question/25384702

#SPJ4

The correct sorting function to list Colors in alphabetical order is Ascending.

The value would be returned based on the formula in Cell A49 is 4.

A function is simply the code that one can use over and over again, rather than writing it out multiple times. In this case, it'll be illustrated in an ascending order.

Also, the formula: =COUNTIF(range;"*"). Range is defined cell range where you want to count the text in Excel and wildcard * is criteria for all text occurrences in the defined range.

The answer is 4, there were four instances of Np in the given range of five cells.

Learn more about functions on:

https://brainly.com/question/10439235

#SPJ1

Steel spoons heat up the fastest of all other spoons. This is because steel is primarily composed of metals with metallic properties such as heat conduction.

The specific heat capacity of metals is small. H. Amount of heat required to raise 1 g of substance by 1°C.

This is how metals conduct heat very quickly. Delocalized electrons around the central nucleus play a very important role. Other properties derived from metallurgical bonding include ductility, malleability, and luster.

Therefore, of the four spoons of the same size and shape, the iron spoon heats up the fastest.

To know more about heat conduction refer to:

https://brainly.com/question/20493362

#SPJ1

Answer:

2 NaOH + H2SO4 -> Na2SO4 + 2 H2O

If you react H2SO4 with NaOH, then NaHSO4 is formed.

H2SO4+NaOH - NaHSO4+H2O

In the reaction described, the OH group accepts the proton of sulfuric acid. Consequently, one water molecule is eliminated,ans further the process was done to get the desired result.

After the elimination, a secondary carbocation is produced. This carbocation then goes through a 1, 2-hydrogen shift to produce a more stable tertiary carbocation. A cyclic molecule is produced as a result of the alkene's addition of electrons to the tertiary carbocation.

Carbonation is the addition of carbon dioxide gas to a beverage to give it sparkle and a tangy flavor while also preventing spoilage. Under pressure, the liquid is chilled and cascaded down in an enclosure containing carbon dioxide (either as dry ice or as a liquid). Gas absorption is maximized by increasing pressure and decreasing temperature. Pasteurization is not required for carbonated beverages.

Below is a diagram of the mechanism:

To learn more about sulfuric acid Please click on the given link:

https://brainly.com/question/10220770

#SPJ4

Answer:

because H (hydrogen) is very reactive with other elements

Explanation:

Expansion is the process of an object increasing its size or volume, while contraction is the process of an object decreasing its size or volume. Both expansion and contraction occur in response to a change in temperature.

When an object is heated, it expands as the molecules within it begin to move faster. This increases the distance between the molecules, causing the object to increase in size and volume. Conversely, when an object is cooled, the molecules within it slow down, and the distance between them decreases. This causes the object to contract and decrease in size and volume.

Expansion and contraction are both physical properties of matter. Expansion and contraction occur in all states of matter, including solids, liquids, and gases. Expansion and contraction can also occur in non-matter objects, such as air and water.

Expansion and contraction have practical applications in everyday life. For instance, in construction, expansion and contraction are taken into account when designing bridges and other structures. The expansion and contraction of metal, concrete, and other materials due to changes in temperature must be taken into account in order to prevent structural failure.

Learn more about Expansion at : https://brainly.com/question/8075902

#SPJ4

The Lewis structure of CHO, which obeys the octet rule is attached as a picture. electrons required (ER) = 26, valence electrons (VE) = 18, shared pairs (SP) = 4, and lone pairs (LP) = 5.

The total number of valence electrons in the molecule, which is present in each individual atom, is represented by that atom.

The valence electrons in the CHO- = 4 + 6 + 1 + 1 = 12. 

Since C, O, and H are group IVA, VIA, and IA elements, their valence electrons are 4, 6, and 1, respectively. For every negative charge, an additional electron is added.

Electrons required (ER) = 26

Valence electrons (VE) = 18

Shared pairs (SP) = 2 + 2 + 4 =8 (means 4 shared pairs)

Lone pairs (LP) = 3 + 2 = 5

You can also learn about valence electrons from the following question:

https://brainly.com/question/28977387

#SPJ4

The shape of this is trigonal bipyramidal. By VSEPR arrangement the xenon atom present in Central and an oxygen is present in xef2o.

Xenon (Xe) serves as the main atom in the hybridization of xenon difluoride. Two electrons are located in the 5s orbital and six are located in the 5p orbital, respectively, if we count the number of valence shells in Xe. xef2o Its electrical ground state arrangement will be 5s2 5p6. Although its setup will alter to 5s2 5p5 5d1 when it is stimulated. Overall, the atomic orbitals of the xenon atom will be hybridised to produce 5 sp3d hybrid orbitals in the excited state configuration (5s, 5py, 5px, 5pz, and 5dzx). By overlapping the two partially filled 2pz atomic orbitals of fluorine, two-hybrid orbitals are created, which are then utilised to produce F-Xe-F sigma bonds. The three remaining hybrid orbitals with lone pairs are those that are not involved in bonding.

Learn more about xef2o here:

https://brainly.com/question/11625217

#SPJ4

If sanitizer is added to the water, it won't be enough to adequately eliminate the microorganisms that cause foodborne disease. If there is an excessive amount of sanitizer added to the water, it may dry on dining tables and kitchen countertops.

Using test strips, verify that the sanitizer is neither either too strong or too weak. The sanitising combination should only receive the precise amount of water.

Over time, a chlorine bleach sanitising solution starts to lose part of its effectiveness. The sanitising solution must therefore be evaluated using test strips.

To know more about sanitizing solution visit:-

https://brainly.com/question/4296165

#SPJ4