Answer:
0.4 L
Explanation:
Calculate by using Boyle's Law P₁V₁=P₂V₂
(0.14atm)(2.4L) = (0.84atm)(V₂)
0.336 atmL = (0.84atm)(V₂)
V₂ = 0.336 atmL/0.84atm
V₂ = 0.4 L
calculate the value of (Ag+) in a saturated solution of AgCl in distilled water
Answer:
[tex][Ag^+]=1.3x10^{-5}M[/tex]
Explanation:
Hello there!
In this case, according to the dissociation of silver chloride in aqueous solution, we can write:
[tex]AgCl(s)\rightarrow Ag^+(aq)+Cl^-(aq)[/tex]
Whereas the equilibrium expression is:
[tex]Ksp=[Ag^+][Cl^-][/tex]
And the solubility product constant is 1.7 x10⁻¹⁰; thus, by inserting x as the concentration of both silver and chloride ions as they are the same at equilibrium, we obtain:
[tex]1.7x10^{-10}=x^2\\\\x=\sqrt{1.7x10^{-10}} \\x=1.3x10^{-5}M[/tex]
Which is also equal to the concentration silver ions at equilibrium in a saturated solution because we considered the Ksp.
[tex][Ag^+]=1.3x10^{-5}M[/tex]
Best regards!
. Which law of motion relates the action of a stretched rubber band
Answer:
newtons 3rd law of motion
Explanation:
Heat is most closely related to which kind of energy?
Answer:
I'm very sure it's thermal energy.
Explanation:
Answer:
thermal energy is the answer
Big assignment please help. Will do anything
Bases are typically found in
Answer:
they are typically found in
1)soap
2) detergent
3) baking soda etc..
Atoms with 5 or more valence electrons tend to form __________________ ions, called _________.
Answer:
positively-charged cations
Explanation:
hope this helps! :)
HELP QUICK!!!!!!
How many valence electrons do the atoms in Group 13 have?
Answer:
The answer is 3 valance electrons.
Explanation:
Hope this helped Mark BRAINLIEST!!!
Answer:
3 valence electrons
Explanation:
The atoms in group 13 have three valence electrons.
A gas has a pressure of 699.0 mm Hg at 40.0 0C. This temperature is
K.
What is the temperature at 760.0 mm Hg? K (round to 1 decimal place) or
degrees Celsius (round to one decimal place.
Answer:
initial temp: 313.2 Kfinal temp: 340.5 Kin Celsius: 67.3 °CExplanation:
Given a volume and quantity of gas at 699.0 mm Hg pressure has a temperature of 40.0 °C, you want to know the temperature at 760.0 mm Hg pressure.
Pressure and TemperaturePressure and absolute temperature of a gas are proportional for a given quantity and volume.
Initial temperatureThe temperature of 40.0 °C is an absolute temperature of ...
40.0 K + 273.15 K = 313.15 K ≈ 313.2 K
New temperatureThe temperature after increasing the pressure can be found from ...
T/313.15 = (760.0 mm)/(699.0 mm)
T = 313.15 · 760/699 ≈ 340.5 . . . . Kelvin
In Celsius, that is ...
340.5 K -273.2 = 67.3 °C
<95141404393>
arrange the following group of atoms in order of decreasing atomic size:B,Al,Ga
Answer:
B<Ga<Al
Explanation:
Hope this helps
ANSWER THIS GET 25 POINTS!!!!
Sam is walking in a garden on a day represented by the figure above. Which plants in the garden could be blooming on this day?
A:long-day and day-neutral plants
B: day-neutral plants only
C: short-day and day-neutral plants
D: short-day, long-day, and day-neutral plants
Answer:
C: short-day and day-neutral plants
Explanation:
There is no figure above.
Convert 8.19 x 10-14 moles of gold to atoms.
Answer:
4.932018 × 10¹⁰ atoms
Explanation:
Recall that:
1 mole = 6.022 × 10²³ atoms
To change 8.19× 10⁻¹⁴ moles to atoms;
Then, we have:
= (8.19× 10⁻¹⁴× 6.022 × 10²³ atoms)
= 4.932018 × 10¹⁰ atoms
?CH4 → ?C6H6 + ?H2
?C2H6 + ?O2 → ?CO2 + ?H2O
I need to know the number that goes in front of the equations
Answer:
You basically want to balance these equations.
(6)CH4 → (1)C6H6 + (9)H2
(2)C2H6 + (7)O2 → (4)CO2 + (6)H2O
NOTE: DO NOT PUT BRACKETS IN YOUR ANSWER, I HAVE PUT HERE FOR THE ANSWERS INSTEAD OF QUESTION MARKS.
what happens when a molecule absorbs infrared radiation
Answer:
When a molecule absorbs infrared radiation,transition s occur from the ground vibrational state to an excited vibrational state. For a molecule to be IR active there must be a change in dipole moment as a result of the vibration that occurs when IR radiation is absorbed.
What is the percent yield of water from the combustion of propane (C3H8), if my theoretical yield is 8.17g of water and my actual yield was 6.13 g water?
A)Answer not shown
B)0.75%
C)75%
D)1.33%
Answer:
im not sure
Explanation:
i went on here looking nobody answered yet
How does increasing the pressure affect the reaction rate? A. The activation energy of the reaction is changed. B. The concentration of reactants is changed. C. The temperature of the reaction is changed. D. The phase the reactants are in is changed
Answer:
Explanation:
b
The rate of the reaction determines the product formation and depends on various factors. The increase in pressure will change the concentration of reactants. Thus, option B is correct.
What is the reaction rate?The rate of the reaction is the speed at which the chemical reaction moves in a direction to yield products. The reaction rate is influenced by the surface area of the substance, temperature, and concentration.
The pressure directly affects the concentration which in turn affects the reaction rate. The increased pressure raises the concentration and more collisions will occur between the particles resulting in a fast rate of reaction.
Therefore, the increase in pressure increases the concentration and reaction rate.
Learn more about reaction rate here:
https://brainly.com/question/12866245
#SPJ5
what is the pH if the H+ is 5.7 x 10^-10 M ?
Answer:
9.24
Explanation:
-logofH
which of the following, when dissolved in water, forms a weak acid.A. HNO3B. HClO4C. HBrD. HClOE. NH3
Answer:
The weak acid is - E. [tex]NH_3[/tex]
Explanation:
Ammonia is a strong base, which in turn make it to be a weak acid.
As, the rest of the options are acid and therefore furnish hydrogen ions when dissolved in water, making them strong acid.
And ammonia dissolves in water to form its conjugate ammonium ion and hydroxide ion, therefore making the solution basic.
Hence, from the given options, the correct option is E. [tex]NH_3[/tex]
The compound which when dissolved in water, forms a weak acid is; Choice E: NH3
According to the question;
we are required to determine which compound forms a weak acid when dissolved in water.Unlike other compounds (HNO3, HClO, HBr, HClO) which dissolve in water to yield H+ ion, Ammonia dissolves in water to form ammonium ion and hydroxide ion, OH-.
In essence, NH3 is a strong base when dissolved in water and consequently, is a weak acid when dissolved in water.
Read more:
https://brainly.com/question/15192126
arrange the following group of atoms in order of increasing atomic size:B,Al,Ga
Answer:
Al,Ga,B
Explanation:
Now since i helped you can you help me with this plz
Matteo took 5 math quizzes. The mean of the 5 quizzes was 8.2. Here are four of his quiz scores 7, 7, 8, 10. What is the 5th quiz score? Show work.
Boron ( B )
Aluminium ( Al )
Gallium ( Ga )
2C 2 H 2 (g)+5O 2 (g) CO 2 (g) + 2H 2 O (l)
Answer:
2c2gh2+5cg2o4+2h2lo
Explanation:
From an element's location in the periodic table, you can predict
A. its properties.
B. its chemical name.
C. its chemical symbol.
D. when it was discovered.
Answer:
A. It's properties
Explanation:
Gallium (, ) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc. has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at and has a heat of fusion of . What is the entropy change of of gallium in as it melts when placed on a surface at
The given question is incomplete. The complete question is:
Gallium (Ga, 69.723 g/mol) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc. has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at 29.8 °C and has a heat of fusion of 5.59 kJ/mol. What is the entropy change of 22 g of gallium in J/K as it melts when placed on a surface at 29.8°C?
Answer: The entropy change of of gallium in as it melts when placed on a surface at is 5.81 J/K
Explanation:
Latent heat of fusion is the amount of heat required to convert 1 mole of solid to liquid at atmospheric pressure.
Amount of heat required to melt 1 mole of Ga = 5.59 kJ
Mass of Ga given = 22 gram
Heat required to melt 69.723 g of Ga = 5.59 kJ
Thus Heat required to melt 22 g of Ga = [tex]\frac{5.59kJ}{69.723}\times 22=1.76kJ[/tex]
Temperature = [tex]29.8^0C=(273+29.8)kJ=302.8kJ[/tex]
Now entropy change = [tex]\frac{\text {heat of fusion}}{\text {temperature in K}}=\frac{1.76kJ}{302.8K}=0.00581kJ/mol=5.81J/K[/tex]
Thus the entropy change of of gallium in as it melts when placed on a surface at [tex]29.8^0C[/tex] is 5.81 J/K
Considering change of state descriptions, select the name of the change of state for when energy is absorbed. Group of answer choices sublimation freezing condensation deposition
Answer: Sublimation
Explanation:
Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.
Freezing is a process in which a liquid changes into solid phase when allowed to cool.
Condensation is a process in which a gas changes into liquid phase when allowed to cool.
Deposition is a process in which a gas deposits as solid phase when allowed to cool.
Thus change of state where energy is absorbed is sublimation.
What is it called when a gas turns into a liquid
Answer:
condensation
Explanation:
The process of a gas becoming a liquid is called condensation.
☁️ Answer ☁️
Condensation
"Condensation is the name of the process through which gas turns into a liquid. Three common states of matter exist: solids, liquids and gases. Matter, however, can change its state with the addition or subtraction of energy. The energy is usually in the form of heat. "
Hope it helps.
Have a nice day noona/hyung.
Question attached above
wich strong nucleophil h2s or water??and why??
According to my notes, nucleophilicity order is directly proportional to basicity order in an aprotic medium, and is inversely proportional to basicity order in protic medium. And H2O is a stronger base than H2S, so it should be the strong nucleophile, but the answer is given as H2S is the stronger nucleophile.
hope this helped, good luck <3
A city continuously disposes of effluent from a wastewater treatment plant into a river. The minimum flow in the river is 130 m3/s, and the discharge from the treatment plant is 37 m3/s. Upstream from the outfall, the background concentration is 0.69 mg/L. The maximum allowable concentration in the river is 1.1 mg/L. What is the maximum concentration that of the pollutant (in mg/L) that can be safely discharged from the wastewater treatment plant
Answer:
[tex]2.54\ \text{mg/L}[/tex]
Explanation:
C = Allowable concentration = 1.1 mg/L
[tex]Q_1[/tex] = Flow rate of river = [tex]130\ \text{m}^/\text{s}[/tex]
[tex]Q_2[/tex] = Discharge from plant = [tex]37\ \text{m}^3/\text{s}[/tex]
[tex]C_1[/tex] = Background concentration = 0.69 mg/L
[tex]C_2[/tex] = Maximum concentration that of the pollutant
The concentration of the mixture will be
[tex]C=\dfrac{Q_1C_1+Q_2C_2}{Q_1+Q_2}\\\Rightarrow C_2=\dfrac{C(Q_1+Q_2)-Q_1C_1}{Q_2}\\\Rightarrow C_2=\dfrac{1.1(130+37)-130\times 0.69}{37}\\\Rightarrow C_2=2.54\ \text{mg/L}[/tex]
The maximum concentration that of the pollutant (in mg/L) that can be safely discharged from the wastewater treatment plant is [tex]2.54\ \text{mg/L}[/tex].
At 40°C how many grams of sugar would dissolve in 100 grams of water
Answer:
I think is C 240 yup yup
Explanation:
At 40°C how many grams of sugar would dissolve in 100 grams of water?
__Zn+__HCI → _ZnCl2 + __H2
Answer:
1Zn+ 2HCI → 1ZnCl2 + 1H2
warm air rises at the equator and cold air sinks at the poles creating
A. tornadoes
B. hurricanes
C. convection currents
D. the coriolis effect
Answer:
c.convention currents
Explanation:
As hot air cools it sinks back to the surface of the earth, where it gets warmed by the ocean only to rise again.This is called a convection current.
Which of the following is an example of synthesis?
A) HgO + Cl2-->HgCl + O2
B) Na + Br2 --> NaBr
C) KClO3 --> KCl + O2
D) Cl2 + NaBr --> NaCl + Br2
Answer:
B
Explanation: